User Manual - Protex Safe Co.

User Manual - Protex Safe Co.
DIAGRAM 1.0
WELCOME:
STEP 1 – OPENING THE SAFE:
1. Install the 4 AA batteries in the Power Override Box. We
recommend using high-quality batteries such as Duracell
or Energizer.
2. Plug the Power Override Jack to the Power Override Hole.
3. Enter code. Factory default code is: 1-2-3-4
4. If the correct code is entered, the LCD Display will show
“OPEN”. If a wrong code was entered the LCD Display will
show “E-CODE”. Please re-enter the right code.
5. The door will automatically open and the display will show
“OPENED” for 4 seconds.
NOTE: Remove the batteries from the Power Override Box and
install them in the battery box that is located in the back of the
safe door.
ENROLLING:
STEP 2 – CHANGING USER CODE:
1. Open the safe using the code.
2. Enter your new 4-Digit code and press the # key.
STEP 3 – CHANGING MASTER CODE:
DIAGRAM 2.0
2
1. Open the safe using the code.
2. Enter your existing master code. Factory default code is: 8-88-8-8-8
3. Press the # key. The LCD Display will show “NEU”.
4. Enter your new 6-Digit master code and press the # key. The
LCD Display will show “AGAIN”.
5. Enter your new 6-Digit master code again and press the #
key. If procedure is successful LCD Display will show “DONED”,
in case of a wrong code the LCD Display will show “E-CODE”.
Please repeat steps 2 thru 5.
3
EMERGENCY OPENING:
POWER OVERRIDE:
1. Open the safe by following STEP 1.
KEY OVERRIDE:
1. Gently unscrew the Keyhole Cover, this will reveal the
Keyhole.
2. Insert the key and turn the key counter-clockwise (left) to
open the safe.
Note: The safe keeps the code in memory up to 6 months without
power.
TIPS:
•
•
•
•
Use digits 1 – 0 to enter your code.
Use the “RESET” key as backspace to clear the last digit.
If you don’t want your code showing on the LCD Display,
before you enter your code press the “RESET” key twice
followed by the # key. The LCD Display will show squares
instead of digits.
When the LCD Display shows “LO-BAT” it is highly
recommended to change the batteries as soon as
possible.
User Manual
For
Electronic safe
Models:
RAQ Keypad
Rev. 121807
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement