Quick Start Guide DVD/CD Stand-Alone Duplicators

Quick Start Guide DVD/CD Stand-Alone Duplicators
Quick Start Guide
DVD/CD Stand-Alone Duplicators
Part # 260155 and 260156
Congratulations on your purchase of an Aleratec
DVD/CD Stand-Alone Duplicator, considered by industry
experts to be one of the finest DVD/CD Duplicators
Included Items
• 1:1 DVD/CD Copy Cruiser Pro HS or
1:1 DVD/CD Copy Cruiser Pro HLS; part
number 260155 or 260156, respectively.
• Power Cord
The entire staff at Aleratec is committed to providing
you with complete satisfaction. Our courteous and
knowledgeable staff will do everything possible to meet
or exceed your expectations about owning and
operating your new DVD/CD Duplicator.
• USB Cable
For more detailed information on configuring the
DVD/CD Duplicator and applying it's various
capabilities, please refer to the User Guide on the CD
Product Features
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
DVD/CD Duplicator.
We at Aleratec appreciate your selection of our product,
and wish you great success and enjoyment of your new
DVD/CD Duplicator.
• Software and User Guide CD
• Quick Start Guide (this document)
• Aleratec Registration Card
• True stand-alone duplication of DVDs and
CDs, no computer required.
• Simple one-touch operation.
• USB 2.0 for computer connected operation
• Simple to use; no set-up required. Plug it in
and start copying immediately.
Key Items on the DVD/CD Stand-Alone Duplicators
DVD/CD Recorder
Quick Summary of Operation
LCD Display Panel
displays a menu of
functions and
Menu scroll
scroll up
Cancel the
Stand Alone Duplication
• Use the arrow buttons to select the Copy function.
Place the source DVD or CD in the upper drive.
Place a blank DVD-R/RW, DVD+R/RW, CD-R, or
CR-RW disc in the lower drive. After the lower
drive detects the blank disc, press the ENT button to
start copying.
• When Copy is completed, a good disc copy will be
ejected automatically. Failed discs will remain in the
lower drive and can be ejected manually. (Default
setting: a good disc will be ejected. This can be
changed; see the Setup section of the User Guide.)
For continuous duplication, reload blank discs into
the lower drive and repeat the procedure.
• A failed disc will remain in the lower drive (Default
setting: A failed disc is NOT ejected. To manually
eject a disc, press the ENT button to eject a failed
disc or press the eject button on the drive to eject
the disc.
External DVD/CD Recorder/Labeler
• Connect the USB cable (included) to the USB port
on the back of your duplicator and to an empty
USB port on your computer.
• Power on your duplicator. The display should show:
L.H. Mode
D1 Mult
D2 Mult
If you do not see this display, refer to the USB
section of the User Guide.
• Install the included Nero software (and USB drivers
if you are using Windows 98 SE).
• Launch the Nero software and select the desired
recording function. Insert appropriate media into
the DVD/CD-Recorder, and follow the display
prompts to record.
LightScribe Disc Labeling (P/N 260156
• Place a LightScribe-certified disc with a blank label
(label side down, data recording side up) in the
DVD/CD Recorder.
• Launch the Label Maker software and you will find
"Print LightScribe Label."
• Select a label type, design your label, then print it.
Technical Support Addresses and Phone Numbers
By e-mail: [email protected]
By Telephone: 1-818-678-0484
The Aleratec Technical Support Group can be reached between the hours of 8:30 a.m. and 5:30 p.m., Pacific Time,
Monday through Friday, excluding U. S. holidays.
Please try to call from a phone that is near your computer system.
Access is available 24 hours a day, 365 days a year, via:
The World Wide Web at: www.aleratec.com
FAX at: 1-818-475-5203
© 2007 Aleratec, Inc.
P/N 9299033 Rev. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF