"user manual"
®
®
®
2005
Test Tools Catalog
Digital Multimeters
Electrical Testers
Clamp Meters
Installation Testers
Power Quality Tools
ScopeMeter® Test Tools
Digital Thermometers
Field Calibrators
Fluke Corporation
P.O. Box 9090
Everett, WA USA 98206
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
For more information call:
In the U.S.A. (800) 443-5853
or Fax (425) 446 -5116
In Europe/M-East/Africa +31 (0)40 2 675 200
or Fax +31 (0)40 2 675 222
In Canada (905) 890-7600
or Fax (905) 890-6866
From other countries +1 (425) 446 -5500
or Fax +1 (425) 446 –5116
Visit us on the world wide web at:
http://www.fluke.com
Fluke (UK) Ltd.
52 Hurricane Way
Norwich
Norfolk
NR6 6JB
United Kingdom
Tel.: 0207 942 0700
Fax: 0207 942 0701
E-mail: [email protected]
Visit us on the world wide web at:
http://www.fluke.co.uk
© Copyright 2005, Fluke Corporation.
All rights reserved.
Printed in the Netherlands 12/04
Data subject to alteration without notice.
Pub_ID: 10827-eng
Rev. 01
Test Tools Catalog 2005
Fluke. Keeping your world
up and running.
Accessories
www.tti.co.uk
Tel: 01480 412451
Contents
Fluke web and electronic newsletter..........................................................................1
New from Fluke ............................................................................................................2-3
Other catalogs from Fluke
Application/Background Stories ..............................................................................4
Why true-RMS............................................................................................................5
Fluke where safety is built-in..................................................................................6-7
Troubleshooting Adjustable Speed Drives ............................................................8
Basic electrical testing ..............................................................................................9
A brief look at ATEX ..................................................................................................10
Digital Multimeters ......................................................................................................11
DMM Selection Guide................................................................................................12
Test faster and safer with a new Fluke meter ......................................................13
Fluke Combo Kits ......................................................................................................14
180 Series Digital Multimeters ................................................................................15
80 Series V Digital Multimeters ..............................................................................16
170 Series Digital Multimeters ................................................................................17
110 Series Digital Multimeters ................................................................................18
73/77 Digital Multimeters ........................................................................................19
27 Sealed Digital Multimeter ..................................................................................20
12/16 Digital Multimeters..........................................................................................21
78/88V Automotive Meters ......................................................................................22
867B Graphical Multimeter ......................................................................................23
45 Dual Display Bench Multimeter..........................................................................24
In addition to the products featured in this Test Tools
Catalog, Fluke also offers a variety of other products,
an overview of which is shown in the following
catalogs.
Fluke Precision
Measurement products
Total Solutions in Precision
Measurement
A variety of products covering DC/LF
Electrical Calibration, Power Calibration,
Calibration Software, Pressure
Calibration, Time and Frequency, Temperature and
Humidity Calibration including Hart Scientific, as well as
Data Acquisition and General Purpose Test products like
arbitrary waveform generators and VXI products.
Electrical Testers and Clamp Meters ......................................................................25
T3/T5 Electrical Testers ............................................................................................26
T100 Series Voltage/Continuity Testers ................................................................27
7-600 Electrical Tester/1AC VoltAlert ....................................................................28
C-220/C-210 Carbon Monoxide Testers ................................................................28
330 Series Clamp Meters..........................................................................................29
320 Series Clamp Meters..........................................................................................30
To get a copy, please click “Request a catalog” on your
local Fluke web site.
Installation Testers ......................................................................................................31
1650 Series Multifunction Installation Testers ......................................................32-33
1550B MegOhmMeter................................................................................................34
1520 MegOhmMeter ..................................................................................................35
Fluke Networks products
Power Quality Tools ....................................................................................................36
Power Quality Selection Table ................................................................................37
430 Series Three-phase Power Quality Analyzers ..............................................38-39
43B Single-phase Power Quality Analyzer............................................................40
VR101S Voltage Event Recorder System ................................................................41
The most comprehensive line of premises
network testing tools for the inspection,
verification, certification and
documentation of copper and fiber optic
cabling systems.
ScopeMeter® Test Tools ..............................................................................................42
ScopeMeter Selection Table ....................................................................................43
190 Series ScopeMeters............................................................................................44-45
120 Series ScopeMeters............................................................................................46
ScopeMeter Accessories............................................................................................47
Digital Thermometers..................................................................................................48
60 Series Infrared Thermometers ..........................................................................49
50 Series Thermometers ..........................................................................................50
Field Calibrators............................................................................................................51
Field Calibrator Selection Guide ..............................................................................52
740 Series Documenting Process Calibrators ........................................................53
725 Multifunction Process Calibrator......................................................................54
724 Temperature Calibrator ....................................................................................55
712/714 Temperature Calibrators ............................................................................56
717/718/718Ex Pressure Calibrators ........................................................................57
706/707/707Ex/715 Loop Calibrators ....................................................................58
787/789 ProcessMeters ............................................................................................59
Field Calibrator Accessories ....................................................................................60
General Accessories ....................................................................................................61
Test Leads, Probes & Clips ......................................................................................62-64
Automotive Accessories ............................................................................................65
Current Clamps ..........................................................................................................66-67
Temperature Accessories ..........................................................................................68-69
Cases and Holsters ....................................................................................................70-71
Other Accessories ......................................................................................................72
Fuse and Warranty Information ................................................................................73
Network SuperVision Solutions for
the Copper and Fiber Cabling
Infrastructure.
Network SuperVision Solutions for
the testing, monitoring and
analysis of enterprise networks.
A complete line of handheld network
testers for fast and efficient problem
solving, maintenance and
troubleshooting, as well as a line of
products for distributed network
management, analysis and monitoring.
To get a copy, please contact the local Fluke Networks
sales organization: www.flukenetworks.com/contact.
Fluke. Keeping your world
up and running.
www.tti.co.uk
Tel: 01480 412451
Fluke Web and
Electronic Newsletter
Fluke web
Complete information
The most complete and in-depth resource for
information on Fluke’s products and services
including:
• Product information
• Virtual product demonstrations
• Extended specifications
• Application notes
• Product manuals
• Service information
• What’s new
• Promotions
• Prices
• Where to buy
• Distributor and sales office locations
Find information fast
To quickly find more information on the Fluke
products, use the "Search by model" box in the
top left corner of our web site. All you have to
do is type in the model number.
UK: www.fluke.co.uk
IE: www.fluke.ie
Worldwide: www.fluke.com
Fluke web sites are available in all countries around the world and in 14 different languages.
Electronic Newsletter
E-Test-it! is Fluke’s regular news
publication for professional test tool
users. It is electronically available 6
times per year. You will be the first to
hear about:
• New Fluke products
• The latest actions and promotions from Fluke
• How to get more out of Fluke tools
• How to use Fluke tools better in your
application
• Exclusive offers, promotions and discounts on
Fluke Merchandizing
• Exclusive offers on Fluke ex-demo equipment
E-Test-it! is free of charge. If at any point in
time you do not want to receive E-Test-it!
anymore, you can unsubscribe with a simple
mouse click. E-Test-it! is small in size (on
average about 12 KB) and does not fill up your
mailbox or take long to download.
Try it now and sign-up for your FREE
e-Test-it! subscription.
Go to the Fluke web site and fill in the
on-line subscription form.
1
www.tti.co.uk
Tel: 01480 412451
New from Fluke
Fluke 80 Series V Digital Multimeters
The Fluke 87V has a unique function for accurate voltage and
frequency measurements on adjustable speed motor drives.
See page 16.
Fluke 88V/A Automotive Meter Combo Kit
This complete automotive diagnostic package offers
virtually everything you need in an automotive
multimeter.
See page 22.
T100 Series
Voltage/Continuity Testers
All three models offer a patented three-phase rotation detection system,
providing quick phase rotation indication.
See page 27.
Not available in all countries.
Fluke 430 Series
three-phase Power Quality Analyzers
These rugged and easy-to-use three-phase Power Quality Analyzers
pinpoint power quality problems faster, safer and in greater detail. They
include the innovative AutoTrend and System-Monitor features.
See page 38.
Fluke 60 Series Infrared Thermometers
Pistol grip thermometers with laser guided sighting system for easy
targeting with 1% accuracy.
See page 49.
2
www.tti.co.uk
New from Fluke
Tel: 01480 412451
i400/i400s Current Clamps
The i400 and i400s are 400 A AC Current Clamps with a unique
CAT IV safety rating (600 V CAT IV/1000 V CAT III) and can therefore
be used at virtually all power connections and outlets in low-voltage
power distribution systems.
See page 66.
LVD1 Volt Light
Non-contact AC voltage detector and LED flashlight combined in one
convenient, compact design. With exclusive dual-sensitivity.
See page 72.
TL238 High Energy Test Lead Kit
An accessory kit especially designed for working in high energy
environments. The SureGrip™ Test Probe has only 4 mm of exposed
metal at the tip.
See page 62.
H80M Holster + Magnetic Hanger
Now 80 Series owners can benefit from the Fluke Magnetic Hanging
System. The easy-to-clean, snap-on holster absorbs shocks and protects
your DMM, and is especially designed to hang from just about any metal
surface.
See page 71.
Automotive Accessoires
A new line of accessories designed specifically for use in the
automotive environment. They are also designed to work with
electrical systems up to 60 V DC.
See page 65.
L205 and L206 Hat Lights
Attach it to a hat for all the light you need.
See page 72.
3
www.tti.co.uk
Tel: 01480 412451
Application/
Background Stories
As part of our commitment to supporting you in your work we do
more than just design and manufacture rugged and versatile test tools:
we also provide detailed background information to help you choose
the right instrument and offer advice on using it effectively and safely.
You can download all Application Notes from the product information
pages on our web site.
4
www.tti.co.uk
Tel: 01480 412451
Why True RMS ?
Can you trust your meter reading ?
Measuring accurately is a difficult job in
today’s industrial plants and offices.
More and more personal computers,
adjustable speed drives and other types of
equipment that draw current in short pulses
rather than at a steady level come on line
every day. Equipment like this can cause the
readings of conventional average-responding
meters to be at least inaccurate. If you have
ever experienced blown fuses without any
clear cause, then maybe your meter is to
blame.
Average-responding
Fig 1. Current waveform of a linear load.
When people talk about values of AC
currents, they normally mean the effective
heating or RMS (Root Mean Square) value of
the current. This value is equivalent to a DC
current with the same heating value as the
AC current which is being measured. The
most common way to measure this RMS
value with a meter is to rectify the AC
current, determine the average value of this
rectified signal and then multiply the result
by a factor 1.1. This factor represents the
constant relationship between the average
and RMS values of a perfect sinewave.
However, if the waveform is not a perfect
sinewave, this relationship no longer applies.
This is why average responding meters often
give incorrect readings when measuring
currents in today’s power systems.
True RMS
To measure such distorted current waveforms, you could first check the waveform
with a waveform capturing device, and only
use an average responding meter if the
waveform is a perfect sinewave.
Or alternatively you could take no chances
by always using a true RMS meter.
A modern true RMS meter uses an electronic
measurement technique to provide you with
the real effective value of an AC current, no
matter if the waveform of the current is a
perfect sinewave or a distorted waveform.
As long as it is within the meter’s crest factor
and bandwidth specification.
What about voltage measurements?
What is valid for current measurements in
today’s power systems also is true for voltage
measurements in many industrial and
electronic applications. Often voltage
waveforms are not perfect sinewaves which
will result in incorrect readings with average
responding meters. Therefore it is
recommended to always use True-RMS
responding meters for both voltage and
current measurements.
Linear and non-linear loads
Fig 2. Current waveform of a
non-linear load.
Fig 3. Current waveform of a PC.
True RMS
Linear loads - consisting purely of resistors,
coils and capacitors - always draw a
sinewave current, so there is no
measurement problem (see fig.1). But nonlinear loads like adjustable frequency drives
and office equipment power supplies, draw
distorted current waveforms (see
fig 2 and 3). Measuring the RMS value of
these distorted currents with an averageresponding meter could give you readings
which are up to 50% too low (see fig. 4),
leaving you wondering why your 14A fuse
blows continuously while the current
according to your meter is only 10A.
Type Of
Meter
Measuring
Circuit
Response To
Sine Wave
Response To
Square Wave
Response To
Distorted Wave
Averageresponding
Multiplies
rectified
average by 1.1
Correct
10% high
Up to 50% low
True-RMSresponding
RMS-calculating
converter
calculates
heating value
Correct
Correct
Correct
Fig 4. Comparing the Performance of Average-Responding and True-rms Responding Meters.
5
Fluke: Where safety is built in
As distribution systems and loads
become more complex, the
possibilities of transient
overvoltages increase. Motors,
capacitors and power conversion
equipment such as variable speed
drives can be prime generators of
spikes. Lightning strikes on outdoor
transmission lines also cause
extremely hazardous high-energy
transients. If you’re taking
measurements on electrical systems,
these transients are “invisible” and
largely unavoidable hazards. They
occur regularly on low-voltage
power circuits, and can reach peak
values in the many thousands of
volts. To protect you against
transients, safety must be built into
the test equipment.
Who Develops Safety Standards?
The IEC (International Electrotechnical
Commission) develops international general
standards for safety of electrical equipment
for measurement, control and laboratory use.
IEC61010-1 is used as the basis for the
following national standards:
• US ANSI/ISA-S82.01-94
• Canada CAN C22.2 No.1010.1-92
• Europe EN61010-1:2001
Overvoltage Installation Categories
IEC61010-1 specifies categories of
overvoltage based on the distance the piece
of equipment is from the power source (see
Fig. 1 and Table 1) and the natural damping
of transient energy that occurs in an
electrical distribution system. Higher
categories are closer to the power source and
require more protection.
Within each installation category there are
voltage classifications. It is the combination
of installation category and voltage
classification which determines the maximum
transient withstand capability of the
instrument.
IEC 61010 test procedures take into account
three main criteria: steady-state voltage,
peak impulse transient voltage and source
impedance. These three criteria together will
tell you a multimeter’s true voltage withstand
value.
Figure 1. Understanding categories: location
Within a category, a higher working voltage”
(steadystate voltage) is associated with a
higher transient, as would be expected. For
example, a CAT III 600 V meter is tested
with 6000 V transients while a CAT III
1000 V meter is tested with 8000 V
transients. So far, so good. What is not as
obvious is the difference between the 6000 V
transient for CAT III 600 V and the 6000 V
transient for CAT II 1000 V. They are not the
same. This is where the source impedance
comes in. Ohm’s Law (Amps = Volts/Ohms)
tells us that the 2 Ω test source for CAT III
has six times the current of the 12 Ω test
source for CAT II. The CAT III 600 V meter
clearly offers superior transient protection
compared to the CAT II 1000 V meter, even
though its so-called “voltage rating” could be
perceived as being lower. See Table 2.
Independent testing is the key to
safety compliance
How can you tell if you’re getting a genuine
CAT III or CAT II meter? Unfortunately it’s not
always that easy. It is possible for a
manufacturer to self-certify that its meter is
CAT II or CAT III without any independent
verification. The IEC (International
Electrotechnical Commission) develops and
proposes standards, but it is not responsible
for enforcing the standards. Look for the
symbol and listing number of an
independent testing lab such as UL, CSA,
VDE, TÜV or other recognized approval
agency.
That symbol can only be used if the product
successfully completed testing to the
agency’s standard, which is based on
national/international standards. UL 3111,
for example, is based on EN61010-1. In an
imperfect world, that is the closest you can
come to ensuring that the meter you choose
was actually tested for safety.
Table 1
Overvoltage category
CAT IV
In brief
Three-phase at utility connection,
any outdoor conductors
CAT III
Three-phase distribution, including
single-phase commercial lighting
CAT II
Single-phase receptable
connected loads
CAT I
Electronic
Examples
• Refers to the “origin of installation”; i.e., where low-voltage connection is made to utility power.
• Electricity meters, primary overcurrent protection equipment.
• Outside and service entrance, service drop from pole to building, run between meter and panel.
• Overhead line to detached building, underground line to well pump.
• Equipment in fixed installations, such as switchgear and polyphase motors.
• Bus and feeder in industrial plants.
• Feeders and short branch circuits, distribution panel devices.
• Lighting systems in larger buildings.
• Appliance outlets with short connections to service entrance.
• Appliance, portable tools, and other household and similar loads.
• Outlet and long branch circuits.
• Outlets at more than 10 meters (30 feet) from CAT III source.
• Outlets at more than 20 meters (60 feet) from CAT IV source.
• Protected electronic equipment.
• Equipment connected to (source) circuits in which measures are taken to limit transient
overvoltages to an appropriately low level.
• Any high-voltage, low-energy source derived from a high-winding resistance transformer, such
as the high-voltage section of a copier.
Overvoltage installation categories. IEC 61010-1 applies to low-voltage (< 1000V) test equipment
6
Fluke: Where safety is built in
Safety is everyone’s responsibility
but ultimately it is in your hands. No
tool by itself can guarantee your
safety when working with
electricity. It’s the combination of
the right tools and safe work
practices that gives you maximum
protection. Here are a few tips to
help you in your work:
Select the right test tool:
Inspect and test your test tool:
• Choose a test tool rated to the highest
• Check for a broken case, worn test leads or
a faded display.
• Make sure the batteries still deliver
•
•
Make sure you always comply with
(local) regulations.
Work on de-energized circuits whenever
possible.
Use proper lock-out/tag-out procedures. If these
procedures are not in place or enforced, assume
that the circuit is live.
•
•
Use protective gear when working on
live circuits:
• Use insulated tools
• Wear safety glasses or a face shield
• Wear insulated gloves, remove watches or
jewelry
• Stand on an insulated mat
• Wear flame resistant clothing, not ordinary
work clothes
•
•
•
category and voltage for which it could
possibly be used (most often 600 or
1000 volt CAT III and/or 600 volt CAT IV).
Look for the category and voltage marking
near the recessed input connectors of your
test tool and a “double insulated” symbol
on the back.
Verify your test tool has been tested and
certified by two or more independent
testing laboratories, such as UL in the
United States and VDE or TüV in Europe by
looking for the symbols of these agencies
on (the back of) your test tool.
Make sure that the test tool is made of a
high-quality, durable non-conductive
material.
Check the manual to verify that the ohms,
continuity and capacitance circuits are
protected to the same level as the voltage
test circuit, to reduce hazards when the
test tool is used incorrectly in ohms,
continuity or capacitance mode (if
applicable).
Verify that the test tool has internal
protection to prevent instrument damage
when voltage is incorrectly applied to an
amperage measurement function (if
applicable).
Make sure that the amperage and voltage
of your test tool’s fuses meets
specifications. Fuse voltage must be as
high or higher than the test tool’s voltage
rating.
Be sure to use test leads that have:
- Shrouded connectors
- Finger guards and a non-slip surface
- Category ratings that equal or exceed
those of the test tool
- Double insulation (look for the symbol)
- A minimum of exposed metal on the
probe tips
•
•
sufficient power to get reliable readings.
Many test tools have a low battery
indicator on the display.
Check the test leads resistance for internal
breaks while moving the leads around (good
leads measure 0.1-0.3 Ohm).
Use the meter’s own test capability to
ensure that the fuses are in place and
working right (see manual for details).
Apply the appropriate working
practices when measuring on live
circuits:
• Hook on the ground clip first, then make
•
•
•
contact with the hot lead. Remove the hot
lead first, the ground lead last.
Use the three-point test method, especially
when checking to see if a circuit is dead.
First test a known live circuit. Second, test
the target circuit. Third, test the live circuit
again. This verifies that your test tool
worked properly before and after the
measurement.
Hang or rest the test tool if possible. Try to
avoid holding it in your hands, to minimize
personal exposure to the effects of
transients.
Use the old electrician’s trick of keeping
one hand in your pocket. This lessens the
change of a closed circuit across your chest
and through your heart.
For more information or to request the Electrical Safety DVD go to:
United Kingdom: www.fluke.co.uk/safety
Ireland: www.fluke.ie/safety
E-Europe/Middle-East/Africa: www.fluke.nl/safety_ex
Use protective equipment such as safety glasses
and insulated gloves
Table 2
Overvoltage
Installation
Category
CAT I
CAT I
CAT II
CAT II
CAT III
CAT III
CAT IV
Use meters with these markings:
1000 V CAT III or 600 V CAT IV
Working Voltage
(DC or AC RMS
to ground)
600 V
1000 V
600 V
1000 V
600 V
1000 V
600 V
Peak Impulse
Transient
(20 repetitions)
2500 V
4000 V
4000 V
6000 V
6000 V
8000 V
8000 V
Test Source
(Ω = V/A)
30 Ohm source
30 Ohm source
12 Ohm source
12 Ohm source
2 Ohm source
2 Ohm source
2 Ohm source
Transient test values for overvoltage installation categories.
(50 V/150 V/300 V values not included)
7
www.tti.co.uk
Tel: 01480 412451
Troubleshooting
Adjustable Speed Drives
Adjustable Speed Drives (ASDs)
deliver huge benefits to industry.
They save energy, enable more
precise process control and help
motors and equipment last longer.
However ASDs also cause real
difficulties for service engineers.
The electrical troubleshooting of a
drive can be difficult since most
measurement equipment is not
designed to handle the complex
output signals of the drive.
The Pulse Width Modulated (PWM)
signal
The basic problem comes from the pulse
width modulated, high output voltage of the
drive (see figure 1).
Many instruments have difficulties in
handling this complex signal:
• The PWM signal is difficult to measure (this
has been especially true for DMMs)
• The signal generates high rf noise, making
readings unstable
• Safety norms require CAT III or even CAT IV
rated measurement equipment.
Fluke has several instruments that now make
the troubleshooting of ASDs easy:
Fluke 87V Digital Multimeter
Many of today’s true rms digital multimeters
have bandwidths up to 20 kHz or more. So
they respond not only to the fundamental
component, which is what the motor
responds to, but also to all the high
frequency components generated by the
PWM drive. And if the DMM isn’t shielded
from high frequency noise, the drive
controller’s high noise levels make the
measurement discrepancies even more
extreme.
Figure 1. Motor drive output measured using the
Fluke ScopeMeter 199C
Other Fluke tools
Many ASDs operate in an industrial
environment, where large loads and load
changes can result in poor power quality.
Often, the performance of ASDs may be
impaired by this. Fluke’s range of power
quality products helps to locate and prevent
problems in power distribution systems to
keep ASDs running smoothly.
Measuring current is very important when
servicing ASDs and motors. One of the more
common tools used for this is the current
clamp. However, many ASDs are located in
areas needing CAT IV safety rated
equipment. Fluke’s new i400s and i400
current clamps are the first to be CAT IV
rated. The 400 A range and small overall
size also make them ideal for measuring ASD
and motor currents.
Fluke’s new 87V solves this. This new CAT
IV rated meter has special shielding and a
patented low pass filter that takes accurate
motor measurements. The instrument helps
troubleshoot the basic performance of an
ASD by measuring the proper voltage and
frequency on the motor terminals with the
drive display, calculating the Volt-Herz
product, measuring the DC Bus ripple, and
more.
Fluke ScopeMeter® 190 Series
Figure 2. Output voltage reading without using
the low pass filter.
The Fluke 190 Series ScopeMeters are ideal
for further analyzing problems with pulsewidth-modulated variable speed drives. They
feature a special Vpwm function that
measures the voltage actually applied to
motor whilst simultaneously measuring the
frequency.
The ScopeMeter also provides Connect-andView™ triggering which automatically
displays a stable picture of the real signal.
Figure 3. Output voltage reading with low pass
filter enabled.
8
For more information download the
Application Notes from our web site or
request a copy from our local sales office.
There are three Application Notes available:
• Multimeter measurements on adjustable
speed drives using the Fluke 87V Digital
Multimeter.
• Measuring variable speed-motor drive ®
output voltage with a Fluke ScopeMeter
190 Series.
• Troubleshooting in 3-phase power
networks with the Fluke 430 Series Power
Quality Analyzers.
Basic electrical
installation testing
www.tti.co.uk
Tel: 01480 412451
Growing concern for public safety
and the increasing complexity of
today’s fixed electrical installations
in domestic, commercial and
industrial premises places extra
responsibility on electrical test
engineers who are charged with
verifying conformity to today’s
stringent international standards.
It is therefore important to have suitable
test tools for carrying out the stringent tests
imposed by the International
Electrotechnical Commission (IEC) and the
European Committee for Electrotechnical
Standardization (CENELEC). IEC 60364, and
its various associated national equivalent
standards that are published throughout
Europe (see table 1), specifies the
requirements for fixed electrical
installations in buildings. Section 6.61 of
this standard describes the requirements
for the verification of the compliance of the
installation with IEC 60364.
The basic requirements of IEC
60364.6.61
Many electrical contractors may already be
familiar with IEC 60364.6.61 or its national
equivalents. It states that verification of the
installation shall be carried out in the
following sequence:
1. Visual inspection
2. Testing of the following:
• continuity of protective conductors;
• insulation resistance;
• protection by separation of circuits;
• floor and wall resistance;
• automatic disconnection of supply;
- measurements of earth electrode
resistance
- measurements of fault loop
impedance
- testing RCDs
• polarity;
• functional performance
The basic requirements of
IEC/EN 61557
The European Norm EN 61557 addresses
the requirements for test equipment used in
installation testing. It consists of general
requirements for test equipment (part 1),
specific requirements for combined
measuring equipment (part 10) and covers
the specific requirements for
measuring/testing:
1. Insulation resistance (part 2)
2. Loop impedance (part 3)
3. Resistance of the earth connection
(part 4)
4. Resistance to earth (part 5)
5. RCD performance in TT and TN
systems (part 6)
6. Phase sequence (part 7)
7. Insulation monitoring devices for IT
systems (part 8)
The Fluke 1650 Series multifunction
installation testers are measuring
equipment as described in part 10 of
EN 61557 and the three different models in
the series comply with specific parts of this
norm. They are specifically designed to
carry out the tests specified in
IEC 60364.6.61, and all local
standards/regulations derived from it, in
the safest and most efficient way. They are
lightweight, and feature a unique
ergonomic ‘curved’ form that, when carried
by the neck strap, makes operation in the
field more comfortable.
To test the protective measures as
described above, IEC 60364.6.61 refers to
the IEC / EN 61557.
Table 1
European equivalents of IEC 60364 (6.61)
Austria
Belgium
Denmark
Finland
France
Germany
Italy
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
UK
ÖVE/ÖNORM E8001
A.R.E.I. / R.G.I.E.
Stærkstrømbekendtgørelsen 6
SFS 6000
NF C 15-100
DIN VDE 0100
CEI 64-8
NEN 1010
NEK 400
HD 384
UNE 20460
SS 4364661 / ELSÄK-FS
1995:5
NIN / SN SEV 1000
BS 7671 / 16th Edition IEE
Wiring Regulations
For more information download the
Application Note “Basic Electrical
Installation Testing” from our web
site or request a copy from our local
sales office. (pub_ID: 10641).
9
www.tti.co.uk
Tel: 01480 412451
A brief look at ATEX
Intrinsic safety is a protection
standard employed in potentially
explosive atmospheres. Devices that
are certified as “intrinsically safe”
are designed to be unable to release
sufficient energy, by either thermal
or electrical means, to cause
ignition of flammable material (gas,
dust/particulates).
What is “Intrinsically Safe”?
Intrinsically safe standards apply to all
equipment that can create one or more of a
range of defined potential explosion
sources:
• Electrical sparks
• Electrical arcs
• Flames
• Hot surfaces
• Static electricity
• Electromagnetic radiation
• Chemical reactions
• Mechanical impact
• Mechanical friction
• Compression ignition
• Acoustic energy
• Ionizing radiation
What industries are intrinsically
safe products designed for?
• Petro-chemical
• Oil platforms and refineries
• Pharmaceutical
• Bulk materials (e.g. grain)
• Mining
• Pipelines
• Any environment where explosive gases
are present
What is ATEX?
The primary intrinsically safe standard has
been set in the European Union with the
9/94/EC Directive, commonly called ATEX
(“Atmosphères Explosibles,” French for
explosive atmospheres). The stated goal of
the guidelines is to “help ensure the free
movement of products in the European
Union” by “minimizing the number of
safeguard clause applications, at least those
originating from divergent interpretations
The ATEX rules have been in place as a
voluntary standard since 1 March 1996.
The rules are mandatory on electrical and
electronic equipment for use in
environments subject to explosion hazard
sold in the EU starting 1 July 2003. From
this date onwards, all products sold for use
in explosive atmospheres must have ATEX
certification and carry the distinctive
symbol:
The Fluke Ex (IS) product line
Fluke is among the first manufacturers to
produce handheld test tools according to
the latest ATEX standards. The Fluke line of
intrinsically safe tools are designed to meet
the needs of instrumentation technicians
maintaining and calibrating sensors and
transmitters in hazardous environments
such as petro-chemical plants, oil
platforms, refineries and other locations
subject to risk of explosion.
The difference between a standard Fluke
tool and the corresponding Ex version
starts with its red, impact-absorbing holster
designed specifically to eliminate the
potential for electrical discharge. Inside, the
Fluke Ex tools have been reengineered to
reduce energy avoiding generation of heat
and electrical sparks.
They are premium products designed for
ultimate safety.
Making sense of ATEX certification
Fluke 707Ex is ATEX-compliant and is
certified
II 2 G EEx ia IIC T4— but what
exactly does that mean?
Here a brief explanation of the ATEX
certification designations.
ATEX certification 707Ex
II 2 G
EEx
ia
IIC
T4
10
The ATEX examination mark. This sign is required on all devices used
in European hazardous areas.
The classification of zones.
“II” designates the tool is approved for all non-mining areas.
“2” represents the category of the device, in this case the device is
rated for the second most hazardous areas.
“G” designates atmosphere, in this case gas, vapors and mist.
Explosion protection based on European Ex-regulations.
The type of protection from explosion, in this case the energy in a
device or connector has been reduced to a safe value.
Gas Group. “IIC” indicates compatibility with the most dangerous
gas group.
Temperature class gives the user the maximum temperature of a
surface that may be in contact to the Ex atmosphere under fault
conditions. T4 is rated at 135°C.
www.tti.co.uk
Tel: 01480 412451
Digital Multimeters
Safety, quality and performance: three words that sum up the benefits
of our extensive range of digital multimeters. From compact first-level
troubleshooters to ultra smart instruments packed with features.
Designed to help you do your job faster, more efficiently and with
greater accuracy, there’s a model for every budget and application.
11
Basic features
Counts
True RMS readings
Basic DC accuracy
Wide bandwidth
Auto/manual ranging
Measurements
Voltage AC/DC
Current AC/DC
Resistance
Frequency
Capacitance
Temperature
dB
Conductance
Duty cycle/pulse width
Continuity with beeper
Diode test
4-20mA loop current as % readout
Motor drive measurement
RPM / Dwell
Display
Waveform display
Dual display
Analog bargraph
Backlight
Data storage and exchange
Min-Max recording/with time stamp
Fast Min-Max
Display Hold/Auto (Touch) Hold
Relative
RS-232 interface
Stand-alone logging
Readings memories
Other features
Source 4-20mA loop current/24V loop supply
Automatic selection, VChek
Real time clock
Smoothing
Integrated holster
Removable holster
Closed case calibration
Calibration certificate with data
Separate battery/fuse access
Automatic power off
Low battery indication
Warranty and safety
Lifetime warranty
Warranty (years)
Input alert
Dangerous voltage indication
EN61010-1 CAT II
EN61010-1 CAT III
EN61010-1 CAT IV
See catalog page
12
187
87V
50000 20000
AC+DC
AC
0,025% 0,05%
100kHz 20kHz
●/●
●/●
●/●
250µs
●/●
●
●
●
●
●
●
●/●
●
●
●
●
●
●/●
250µs
●/●
●
●
●
100
●
●
●
●
●/●
●
●
●
●
●
●
●
●
●
●
●/●
●
●/●
●
●
●
●
●/●
●/●
●
●
●
●/●
●
●
●
●
●/-
●
●
●/-
●
●
●
●
●/250µs
●/●
●
●
●
●
●
●/●
●
●
●
●
●/●
●/-
●
●
●
●
1000V
10A
50MΩ
100kHz
10mF
●
●
●/●
●
●
●
●
●/●
●/-
●
●
●
1000V
10A
50MΩ
100kHz
10mF
1000V 1000V 1000V 1000V 1000V 1000V 1000V
600V 600V 600V 600V 600V 600V 600V
15
15
16
16
17
17
17
●
●
●
●
●
●
●
●
●
1000V
10A
50MΩ
100kHz
10mF
+400°C
600V
18
18
●
3
●/●
●
●
●
●/-
●/-
●
●
●
600V
10A
40MΩ
50kHz
10mF
●/●
111
6000
AC
0,7%
600V
●
3
●/●
●
●
●
●/-
●/-
●
●
●
●
600V
10A
40MΩ
50kHz
10mF
●/●
●/●
●/●
●/●
112
6000
AC
0,7%
●/●
0,3%
77
3200
●/●
0,3%
73
3200
Classic design
0,1%
30kHz
●/●
27
3200
Heavy
duty
●/●
1,5%
16
4000
●/●
0,9%
12
4000
18
600V
●
3
●/●
●
●
●
●/-
●/-
●
●
●
19
●
1000V
600V
●
●
●
●
-/●
●
●
●
19
●
600V
●
●
●
●
-/●
●
●
●
20
1000V
●
●
●
●/ ●
-/●
●
●/-
●
●
●
32nS
21
600V
●
3
●
●
●
●
●/●
●
●
21
600V
●
3
●
●
●
●/●
●
●
28
600V
●
2
●
●
●
●
1000V
600V
22
●
●
●
●/●
●
●
●
●/250µs
●/●
●
●
●
●/-
22
300V
●
●
●
●
●/-
●
●/ ●
3
●/ ●
●
●
3
●/●
●
●
●
●/-
●/ ●
●
●
-/ ●
●
●/-
●
-/ ●
●
●/-
●
23
59
59
1000V 1000V 1000V
●
3
●/●
●
●
●
●
●/ ●
1µs
-/ ●
●
●
●
3
●
●
●
●
300V 1000V 1000V 1000V
10A
10A
10A
10A
40MΩ 30MΩ 40MΩ 40MΩ
100kHz 10MHz 200kHz 200kHz
10mF
+980ºC
60dB
60nS
3000nS
●/●
●/●/●
●
●
●
●
●
●
●
●
●
●
●
●
●/●
0,1%
1000V
10A
400Ω 50MΩ
200kHz
10mF
+1090ºC
600V
●/-
1,5%
ProcessMeters
867B
789
787
30000 30000 30000
AC+DC
AC
AC
0,3% 0,025% 0,1%
0,1%
30 kHz
●/●
●/●
●/●
●/●
78
4000
Graphical
Automotive
troubleshooting
meter
7-600 88V
4000 20000
Electrical
troubleshooting
1000V 600V 1000V 600V 600V
10A
10A
10A 200µA
40MΩ 32MΩ 32MΩ 32MΩ 40MΩ 40MΩ
50kHz
10mF
10mF 10mF
+400°C
600V
●/●
110
6000
AC
0,7%
Compact general purpose
179
177
175
6000 6000 6000
AC
AC
AC
0,09% 0,09% 0,15%
Industrial maintenance
and field service
Tel: 01480 412451
60nS
●/●
●
1000V
10A
50MΩ
200kHz
10mF
0,1%
5kHz
●/●
83V
6000
High-end
Industrial
1000V 1000V 1000V
10A
10A
10A
500MΩ 500MΩ 50MΩ
1MHz 1MHz 200kHz
50mF 50mF 10mF
+1350°C +1350°C +1090ºC
60dB 60dB
500nS 500nS 60nS
●/●
●/●
●/●
●
●
●
●
●
189
50000
AC+DC
0,025%
100kHz
●/●
Highest accuracy
www.tti.co.uk
DMM Selection Guide
www.tti.co.uk
Tel: 01480 412451
Test faster and safer
with a new Fluke meter
Move up to better performance
Move up from your old 70 Series and benefit from over 10 improvements.
The new 179 has features and diagnostic functions for faster, safer and more accurate
testing. See page 17 for more details.
Model numbers
Warranty
Old Series
(10 years ago)
New Series
Benefit
75, 77, 79, 21, 23
Expired
175, 177, 179
Lifetime
Lower cost of ownership.
Example product
Old Fluke 79
Do your job safer: Your no 1 priority.
Electrical safety rating
CAT II
(EN 61010-1)
Unsafe Volt Alert above 30 V No
Test leads
New Fluke 179
CAT III 1000 V
CAT IV 600 V
Yes
Sillicon test leads
with 4 mm tips
+ protective cap
Test leads safety rating
Not rated
CAT III 1000 V
Safety of test leads is just as important as
CAT IV 600 V
the meter.
Do your job faster: New features simplify day to day work.
Min/Max/Average
No
Yes
Capture intermittent problems.
Display size
Standard
20% larger
Large, easy to read.
Display backlight
No
Yes
Usable in dim areas.
Battery door
No
Yes
Easy battery exchange without opening the
complete case.
Optional magnetic hanger
No
Yes
Use ToolPak to hold meter in best position.
Do your job better: More functions, more measurement ranges, more accurate.
True-rms
No
Yes
Accurate on non-linear signals.
Basic accuracy, dcV
0,30%
0,09%
Three times more accurate.
Max. AC voltage
750
1000
Wider measurement range.
Temperature
No
Yes
No need for a separate thermometer.
Fluke 79
Test leads with
2 mm probe tips
Maximum safety against arc blasts and
transients.
Warns user of potentially dangerous
voltages.
Test leads stay fixed in wall socket. Cap
protects user from accidental shock.
Fluke 179
Move up from your old 8060 Series and benefit from over 15 improvements.
The new Fluke 189 has new features and functions to troubleshoot more problems with
one tool, find intermittent problems and get the job done faster, easier and safer.
See page 15 for more details.
Model numbers
Warranty
Old Series
(10 years ago)
New Series
Benefit
8062A, 8060A
Expired
187, 189
Lifetime
Lower cost of ownership.
Example product
Old Fluke 8060A
Do your job safer: Your no 1 priority.
Electrical safety rating
IEC348 Class II
(EN 61010-1)
Unsafe Volt Alert above 30 V No
New Fluke 189
CAT III 1000 V
CAT IV 600 V
Yes
Maximum safety against arc blasts and
transients.
Warns user of potentially dangerous voltages.
Test leads safety rating
Fluke 8060A
Fluke 189
Not rated
CAT III 1000 V
Safety of test leads is just as important as the
CAT IV 600 V
meter.
Do your job faster: New features simplify day to day work.
Built in recorder with time
No
Yes
Record and view intermittent problems and
stamp
drift.
Min/Max/Average
No
Yes
Capture intermittent problems.
Peak capture
No
250 µs min/max
Find glitches and transients without a scope.
PC interface
No
Isolated IR serial port Transfer readings to FlukeView® software.
Digital display
Standard
20% larger dual
Easier to read under all conditions. Display
display, backlight
two measurements at once.
and bargraph
Range selection
Manual
Auto and Manual
Faster, most accurate range selected.
Optional magnetic hanger
No
Yes
Use ToolPak to hold meter in best position.
Do your job better: More functions, more measurement ranges, more accurate.
AC + DC measurement
No
Yes
Measure composite signals.
Best resolution
10 µV
1 µV
See more detail, observe trends better.
AC voltage
750 V max.
1000 V max.
Measure higher voltages.
AC and DC current
2 A max.
10 A max.
Measure 5 times more in-line current.
Temperature
No
Yes
No need for a separate thermometer.
Capacitance
No
Yes
Measure motor capacitors and components.
Duty cycle, pulse width
No
Yes
Troubleshoot control circuits.
Frequency range
200 kHz (700 kHz) 1 MHz
Measure high frequency signals.
13
www.tti.co.uk
Fluke Combo Kits
Tel: 01480 412451
Buy a Combo Kit and save
New
87V/E Industrial
Electrician Combo Kit
Electronics Combo Kit
• Fluke 179 True RMS Multimeter
• TL224 SureGrip™ Silicone Test
Lead Set
• TL910 Electronic Test Probe Set
• AC280 SureGrip™ Hook Clip Set
• 80BK Integrated DMM
Temperature Probe
• C800 Hard Meter and Accessory
• Fluke 87V True RMS
Multimeter
• TL224 SureGrip™ Silicone
Test Lead Set
• TP238 SureGrip™ Slim Reach
•
•
•
•
Save
17%
Test Probe Set (insulated tips
with 4 mm of exposed metal)
AC 220 SureGrip™ Alligator
Clip Set
Magnetic Hanger
80BK Temperature Probe
C800 Hard Case
Case
Save
24%
Industrial Combo Kit
Electrician’s Combo Kit
• Fluke 179 True RMS
Multimeter
• TL224 SureGrip™ Silicone
Test Lead Set
• AC220 SureGrip™ Alligator
Clip Set
• TP4 Slim Reach Test Probe
Set (4 mm)
• 80BK Integrated DMM
Temperature Probe
• C800 Hard Meter and
Accessory Case
• + Maglite flashlight
• Fluke 112 True RMS Multimeter
• Fluke 322 Clamp Meter
• TL76 All-in-one Test Lead Set
• C800 Hard Meter and Accessory
Case
Save
23%
Multimeter and Infrared
Thermometer Combo Kit
• Fluke 179 True RMS Multimeter
• Fluke 61 Infrared Thermometer
• C800 Hard Meter and Accessory
Case
Ordering Information
Fluke 87V/E
Fluke
Fluke
Fluke
Fluke
179/MAG Kit
179/EDA Kit
112/322 Kit
179/61 Kit
Fluke 189/FVF
Industrial Electrician
Combo Kit
Industrial Combo Kit
Electronics Combo Kit
Electrician’s Combo Kit
Multimeter and Infrared
Thermometer
Combo Kit
189/FlukeView
Combo Kit
Save
19%
189/FlukeView Combo Kit
• Fluke 189 True RMS Multimeter
• FVF-SC2 FlukeView Forms
Software
Save
19%
14
180 Series
Digital Multimeters
www.tti.co.uk
Tel: 01480 412451
Solve complex problems with advanced
measurement functions, accuracy and data
logging
The Fluke 189 and 187 are the most
advanced meters with the features,
precision and accuracy to troubleshoot
power distribution, industrial automation,
process controls and electronic and electromechanical equipment in the field or on
the bench. Model 189 has a built-in data
logger to record measurements unattended
without a PC. Recorded data can be
viewed on the 189 or transferred to a PC
with optional FlukeView® Forms software.
Features
True-RMS measurements
Bandwidth (voltage/current)
Digital display counts (default/selectable)
Fluke 187
Multiple display with large digits and backlight, updates
4 times per second
Analog bargraph segments, updates 40 times per second
Min-Max-Average recording with relative time stamp
187
AC, AC+DC
189
AC, AC+DC
100kHz / 100kHz
100kHz / 100kHz
50000 / 5000
50000 / 5000
●
●
51-segments
51-segments
●
●
250µsec
250µsec
AutoHOLD® and Relative modes for reference and offset
measurements
Temperature readings using optional K-type thermocouple
and adapter
Audible continuity and diode test
●
●
●
●
●
●
Duty cycle and pulse width measurements
●
●
PC interface for data exchange and closed case calibration
●
●
Fast Min-Max recording
Fluke 189
●
Memory for storing up to 3 days of continues stand-alone
logging
Readings memory (memory locations)
100
Easy battery and fuse exchange without opening the
complete case
Ergonomic case with integrated protective holster
●
●
●
●
Specifications
On all inputs
(Check the Fluke web for detailed specifications)
True RMS
Included Accessories
TL71 silicone test leads, probe holder,
two AC72 alligator clips, 4 AA batteries
(installed), user manual, calibration
certificate with measurement data.
Ordering Information
Fluke 187
True RMS Multimeter
Fluke 189
True RMS Multimeter
Fluke 189/FVF FlukeView Combo Kit
See page 14
FVF-SC2
FlukeView Forms software
including interface cable
Functions
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Conductance
Capacitance
Frequency
Temperature
dBm and dBV
Maximum
1000V
1000V
10A
10A
500MΩ
500nS
50000µF
1MHz
-200°C/+1350°C
-52/+60dB
187 and 189**
±(0.025%+5)
±(0.4%+40)
±(0.15%+2)
±(0.75%+5)
±(0.05%+2)
±(1.0%+10)
±(1.0%+5)
±(0.005%+1)
±(1%+1°C)
± 0.1 dB
Max. resolution
1µV
1µV
0.01µA
0.01µA
0.01Ω
0.01nS
0.001nF
0.01Hz
0.1°C
0.01dB
Accuracies are best accuracies for each function.
** 187 and 189 accuracy and resolution are stated for 50.000 counts.
Battery Life: 72 hours typical (alkaline)
Size (HxWxD): 203 mm x 100 mm x 50 mm
Weight: 0.545 kg
Lifetime Warranty
Recommended Accessories
C125
See page 70
TL910
See page 64
TL81A
See page 64
FVF-SC2
See page 72
TPAK
See page 72
15
80 Series V
Digital Multimeters
www.tti.co.uk
Tel: 01480 412451
Performance and accuracy for
maximum industrial productivity
New
The new Fluke 80 Series V has improved
measurement functions, troubleshooting
features, resolution and accuracy to solve
more problems on motor drives, in plant
automation, power distribution, and electromechanical equipment.
The new Fluke 87V has a unique function for
accurate voltage and frequency measurements
on adjustable speed motor drives and other
electrically noisy equipment. A built-in
thermometer conveniently allows you to take
temperature readings without having to carry
a separate instrument.
Features
83V
87V
●
True-RMS voltage and current for accurate measurements on
non linear signals
Bandwidth (voltage/current)
5 kHz
20 kHz
Digital display counts (default/selectable)
6000
20000 / 6000
●
Selectable filter for accurate voltage and frequency
measurements on motor drives
Large display with analog bargraph and 2 level bright white
backlight
Auto and manual ranging for maximum flexibility
●
●
●
●
●
Built-in thermometer lets you carry one less tool
Fluke 83V
Fluke 87V
●
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead resistance from low ohms
measurements
Min-Max-Average recording with Min/Max Alert to capture
variations automatically
AutoHOLD® to capture stable readings avoiding noisy signals
●
●
●
●
●
●
Audible continuity, diode test and duty cycle
●
●
Input Alert
●
●
“Classic” design with new removable holster with built in
test lead and probe storage
Improved selectable sleep mode for long battery life
●
●
●
●
Easy battery and fuse exchange without opening the
complete case
●
●
Specifications
(Check the Fluke web for detailed specifications)
On all inputs
True RMS
Included Accessories
TL75 test leads, AC72 alligator clips, yellow
holster (H80M excl. TPAK), 80BK temperature
probe (87V only), 9 V battery (installed),
CD-ROM (user’s manual and technical notes)
and operator’s guide.
Ordering Information
Fluke 83V
Multimeter
Fluke 87V
True RMS Multimeter
Fluke 87V/E Industrial Electrician Combo Kit
See page 14
Functions
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Conductance
Capacitance
Frequency
Temperature
80BK temperature probe
1000 V
1000 V
10 A **
10 A **
50 MΩ
60 nS
9999 µF
> 200 kHz
-200 to 1090 ºC
- 40 to 260 ºC
87V*
Max. resolution
Accuracy
0.1 mV
0.1 mV
0.1 µA
0.1 µA
0.1 Ω
0.01 nS
0.01 nF
0.01 Hz
±(0.1+1%)
±(0.5%+2)
±(0.4%+2)
±(1.2%+2)
±(0.4%+1)
±(1.0%+10)
±(1.0%+2)
±(0.005%+1)
-
Max. resolution
Accuracy
10 µV
±(0.05%+1)
10 µV
±(0.7%+2)
0.01 µA ±(0.2%+2)
0.01 µA
±(1.0%+2)
0.01 Ω
±(0.2%+1)
0.001 nS ±(1.0%+10)
0.01 nF
±(1.0%+2)
0.01 Hz ±(0.005%+1)
0.1 ºC
1.0%
2.2 ºC or 2%
Accuracies are best accuracies for each function.
* 87V accuracy is stated for 6.000 counts and resolution for 20.000 counts
** 20 A up to 30 seconds
Battery Life: Over 400 hours typical (alkaline).
Size (HxWxD):
200 mm x 95 mm x 48 mm
Weight: 0.6 kg
Lifetime Warranty
Recommended Accessories
C90
See page 70
16
83V
Maximum Range
TL238
See page 62
i410/i1010
See page 67
TPAK
See page 72
L215
See page 72
170 Series Digital Multimeters
Versatile meters for field service or
bench repair
These meters have the features needed to
find most electrical, electro-mechanical
and heating and ventilation problems.
They are simple to use and have significant
improvements over Fluke’s original
70 Series like, True-RMS, more
measurement functions, conformance to the
latest safety standards, and a much larger
display that’s easier to view.
Features
175
AC
177
AC
179
AC
6000
6000
6000
●
●
33-segments
33-segments
33-segments
●
●
●
Display Hold and AutoHOLD
●
●
●
Min-Max-Average recording mode with Min/Max Alert
●
●
●
True-RMS measurements
Digital display counts, updates 4 times per second
Display backlight
Analog bargraph / segments, updates 40 times per second
Fluke 177
Auto and Manual ranging
®
●
Temperature readings (bead thermocouple probe included)
Fluke 179
Fluke 175
Smoothing mode allows filtering of rapidly changing inputs
●
●
●
Audible continuity and diode test
●
●
●
Test lead alert
●
●
●
Unsafe voltage alert warns for voltages above 30V
●
●
●
Low battery indication
●
●
●
Ergonomic case with integrated holster
●
●
●
Easy battery exchange without opening the complete case
●
●
●
Selectable sleep mode preserves battery life
●
●
●
Specifications
On all inputs
(Check the Fluke web for detailed specifications)
True RMS
Included Accessories
Test leads with 4 mm lantern tips and
protective cap, installed 9V battery and
users manual. The 179 also includes the
80BK temperature probe.
Functions
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Capacitance
Frequency
Temperature
Maximum
1000V
1000V
10A
10A
50MΩ
10000µF
100kHz
-40°C/+400°C
175
±(0.15%+2)
±(1.0%+3)
±(1.0%+3)
±(1.5%+3)
±(0.9%+1)
±(1.2%+2)
±(0.1%+1)
Max. resolution
0.1mV
0.1mV
0.01mA
0.01mA
0.1Ω
1nF
0.01Hz
0.1°C
177
±(0.09%+2)
±(1.0%+3)
±(1.0%+3)
±(1.5%+3)
±(0.9%+1)
±(1.2%+2)
±(0.1%+1)
179
±(0.09%+2)
±(1.0%+3)
±(1.0%+3)
±(1.5%+3)
±(0.9%+1)
±(1.2%+2)
±(0.1%+1)
±(1.0%+10)
Accuracies are best accuracies for each function
Ordering Information
Fluke 175
True RMS Multimeter
Fluke 177
True RMS Multimeter
Fluke 179
True RMS Multimeter
Fluke 179/EDA Kit Electronics Combo Kit
Fluke 179/MAG Kit Industrial Combo Kit
Fluke 179/61 Kit
Multimeter and IR
Thermometer Kit
See page 14
Battery Life: Alkaline, 200 hrs typical
Size (HxWxD): 190 mm x 85 mm x 45 mm
Weight: 0.42 kg
Lifetime Warranty
Recommended Accessories
C90
See page 70
TLK-220
See page 62
TL76
See page 62
i410-i1010
See page 67
17
110 Series Digital Multimeters
Compact general purpose meters
The 110 series True-RMS meters have all
the basic measurement features and
functions needed for every day tasks.
Their simplicity, compact design, and price
make them perfect for quick verifications
for field service and contractor use.
Features
True-RMS measurements
Digital display counts, updates 4 times per second
110
AC
111
AC
112
AC
6000
6000
6000
●
Display backlight
33-segments
33-segments
33-segments
Auto and Manual ranging
●
●
●
Display Hold
●
●
●
Min-Max-Average recording mode with Min/Max Alert
●
●
●
Audible continuity and diode test
●
●
●
Test lead alert
●
●
●
Unsafe voltage alert warns for voltages above 30V
●
●
●
Low battery indication
●
●
●
Compact case with removable holster
●
●
●
Easy battery exchange without opening the complete case
●
●
●
Selectable sleep mode preserves battery life
●
●
●
Analog bargraph / segments, updates 40 times per second
Fluke 111
Fluke 112
Fluke 110
Specifications
(Check the Fluke web for detailed specifications)
On all inputs
True RMS
Included Accessories
Test leads with 4 mm lantern tips and
protective cap, C10 holster, installed 9V
battery and users manual.
Functions
Voltage DC
Voltage AC
Maximum
600V
600V
Max. resolution
1mV
1mV
110
±(0.7%+2)
±(1.0%+3)
Current DC
Current AC
Resistance
Capacitance
Frequency
10A
10A
40MΩ
10000µF
50kHz
1mA
0.01A
0.1Ω
1nF
0.01Hz
±(0.9%+1)
±(1.9%+2)
±(0.1%+2)
111
±(0.7%+2)
±(1.0%+3)
±(1.0%+3)
±(1.5%+3)
±(0.9%+1)
±(1.9%+2)
±(0.1%+2)
112
±(0.7%+2)
±(1.0%+3)
±(1.0%+3)
±(1.5%+3)
±(0.9%+1)
±(1.9%+2)
±(0.1%+2)
Accuracies are best accuracies for each function
Battery Life: Alkaline, 300 hrs typical
Size (HxWxD): 160 mm x 96 mm x 46 mm
Weight: 0.35 kg
Three Year Warranty
Ordering Information
Fluke 110
Fluke 111
Fluke 112
Fluke 112/322
True RMS Multimeter
True RMS Multimeter
True RMS Multimeter
Electricians Combo Kit
See page 14
Recommended Accessories
C50
See page 70
18
TL223
See page 62
TL76
See page 62
MC6
See page 71
TPAK
See page 72
www.tti.co.uk
Tel: 01480 412451
73/77 Digital Multimeters
All-round performers for basic
measurement tasks
The model numbers Fluke 73 and 77 are
an important part of Fluke’s reputation. In
many years of service they have become
the preferred models for a large number of
professionals. The Fluke 73 and 77 offer
exactly the right fit for a wide range of
measurements. They are truly all-round
performers.
The 73 III is perfectly suited for many
electronic applications and has the "classic"
70 series design with removable holster.
The 77 III has all the features and functions
for a wide range of industrial applications
packaged in an ergonomic case with
integrated holster.
Features
73 III
3200
Digital display counts
77 III
3200
●
High contrast digital display with large digits
Fluke 77 III
Analog bargraph/segments
31
31
Auto and Manual ranging
●
●
Automatic Touch Hold®
●
●
Audible continuity / diode test
●
●
●
Ergonomic case with integrated holster
Fluke 73 III
“Classic” design with removable holster
●
Sleep Mode preserves battery life
●
●
CAT II 600V
CAT III 600V
CAT II 1000V
EN 61010-1 safety rating
Specifications
Function
Voltage DC
On all inputs
(Fluke 77 III)
Voltage AC
Current DC
Current AC
Resistance
Maximum
600V
1000V
600V
1000V
10A
10A
32MΩ
Max. resolution
0.1mV
0.1mV
1mV
1mV
0.01mA
0.01mA
0.1Ω
73 III
±(0.3% + 1)
77 III
±(0.3% + 1)
±(2.0% + 2)
±(1.5% + 2)
±(2.5% + 2)
±(0.5% + 1)
±(2.0% + 2)
±(1.5% + 2)
±(2.5% + 2)
±(0.5% + 1)
Accuracies are best accuracies for each function.
Included Accessories
73 III: TL75 test leads, operator’s manual,
9V battery (installed) and C70Y
holster
77 III: TL75 test leads, operator’s manual,
9V battery (installed)
Battery Life: 2000 hours typical
Size (HxWxD): 73 III 188 mm x 85 mm x 48 mm
77 III 190 mm x 89 mm x 45 mm
Weight: 73 III 0.45 kg
77 III 0.42 kg
Lifetime Warranty
Ordering Information
Fluke 73 III Multimeter
Fluke 77 III Multimeter
Recommended Accessories
C50
See page 70
TLK220
See page 62
TL76
See page 62
i400
See page 67
80TK
See page 68
19
27 Sealed Digital Multimeter
Completely sealed to prevent entry of
water and contaminants
A special extra ruggedized case with
o-rings prevents water from entering the
input jacks and switches. Use this meter
in very harsh, wet or dusty locations.
Meets MIL STD 28800 military
specifications for vibration, shock, and
water resistance.
Features
27
Digital Display/Counts
Fluke 27
3200
Analog Bar Graph/Segments
31
Fast Auto and Manual Ranging
●
Touch Hold®
●
Rugged, O-Ring Sealed Case
●
Separate, Sealed Battery/Fuse Door
●
Operates from -15°C to +55° and 95% Relative Humidity
●
Meets Military Shock, Vibration and Water Resistance Requirements
●
Min/Max Relative Mode
●
Audible Continuity/Diode Test
●
Superior EMI Shielding
●
Specifications
On all inputs
Included Accessories
TL75 right-angle test leads, two insulated
AC72 alligator clips, spare fuse, 9 Volt
battery and operator’s manual.
Function
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Conductance
Range & Resolution
320.0mV, 3.200V, 32.00V, 320.0V, 1000V
320.0mV, 3.200V, 32.00V, 320.0V, 1000V
320.0µA, 3.200 mA, 32.00 mA, 320.0 mA, 10A
320.0µA, 3.200 mA, 32.00 mA, 320.0 mA, 10A
320Ω, 3.200kΩ, 32.00kΩ, 320.0kΩ, 3.200MΩ, 32.00MΩ
32.00ns
Best Accuracy
±(0.1% +1)
±(0.5% +3)
±(0.75% +2)
±(1.5% +2)
±(0.2% +1)
±(2% +10)
Range & Resolution: If selected range is 3.200V the resolution is 0.001V in that range
Battery Life: Typically over 1000 hours (alkaline)
Size (HxWxD): 203 mm x 95 mm x 56 mm
Weight: 0.75 kg
Lifetime Warranty
Ordering Information
Fluke 27 Multimeter
Recommended Accessories
C25
See page 70
20
C550
See page 70
TL220
See page 62
AC285
See page 63
i200
See page 66
www.tti.co.uk
Tel: 01480 412451
12/16 Digital Multimeters
Basic digital meters with automatic
AC/DC sensing
The Fluke 12 and 16 are ideal for first-level
troubleshooting. The VChek™ function
provides the user with ultimate ease of use
by automatic switching to AC voltage, DC
voltage or resistance measurements
depending on the input. The Fluke 16 has
extra capabilities for measuring temperature,
current for flame sensor measurements,
capacitance, plus recording of minimum and
maximum values over time with a relative
time stamp.
Features
12
4000
16
4000
Auto and Manual ranging
●
●
VChek™ automatic measurement selection
●
●
Audible continuity/diode test
●
●
Continuity Capture locates 250µs intermittent opens
●
●
Min/Max recording over time with relative time stamp
●
●
Digital display counts
Fluke 16
Rotary measurement selection switch
●
Removable holster
●
●
Sleep Mode preserves battery life
●
Temperature
●
Microamps
●
Fluke 12
Specifications
On all inputs
Fluke 12
Functions
Voltage DC
Maximum
600V
Ordering Information
16
±(0.9%+1)
±(1.9%+3)
±(1.9%+3)
600V
1mV
Current DC
200µA
0.1µA
±(1%+2)
Current AC
200µA
0.1µA
±(2%+3)
Capacitance
Temperature
TL75 test leads, 9V battery (installed) and
operator’s manual. In addition the Fluke 16
includes the 80BK temperature accessory,
and C10 Holster.
12
±(0.9%+1
Voltage AC
Resistance
Included Accessories
Max. resolution
1mV
40MΩ
0.1Ω
±(0.9%+1)
±(0.9%+1)
10000µF
-40/+400°C
0.001µF
0.1°C
±(1.9%+2)
±(1.9%+2)
±(1%+0.8°C)
Accuracies are best accuracies
Battery Life: Alkaline, 650 hours continuous
Carbon-zinc, 450 hours continuous
Size (HxWxD):
12: 144 mm x 69 mm x 39 mm
16: 159 mm x 77 mm x 48 mm
Weight: 12: 0.29 kg
16: 0.44 kg
Three Year Warranty
Fluke 12 Multimeter
Fluke 16 Multimeter
Recommended Accessories
C12A
See page 70
i200s
See page 66
80AK
See page 68
80PK-26
See page 68
MC6
See page 71
21
78 and 88V Automotive Meters
The right meters for auto-electric diagnosis
Perhaps the most important tool you'll
use in troubleshooting auto electrical
systems is the multimeter. Basic
multimeters measure voltage, current and
resistance, while automotive multimeters
like the Fluke 78 or Fluke 88V have
features that can check frequency,
duty cycle, make diode tests, and measure
temperature, pressure and vacuum.
Features
Continuity for detecting open and shorts
78
●
88V/A
●
Frequency for "pulsed-DC" and AC tests
●
●
Duty cycle to verify operation of feedback carburetors
●
●
Diode test for alternator testing
●
●
Built-in thermometer; thermocouple probe included
●
●
Min/Max Recording
●
Fluke 78
Min/Max/Average recording with Min/Max Alert
●
Peak capture to record transients as fast as 250 µs
●
Relative mode to remove test lead resistance from low ohms
measurements
Millisecond pulse width measurements for fuel injectors
●
●
AutoHOLD to capture stable readings
●
Large display with bright, two-level backlight
●
Magnet hanger to attach meter to the vehicle
●
®
Fluke 88V/A
●
optional
RPM80 Inductive Pickup for both conventional and
distributorless (DIS) ignitions
Hard Meter Case
●
CAT II 300 V
Safety rating
CAT III 1000V,
CAT IV 600 V
Specifications
On all inputs
Fluke 88V
Included Accessories
Fluke 88V/A: H80M Holster with TPAK
Meter Hanging Solution, TL224 SureGrip
Silicone Test Lead Set, TP220 SureGrip Test
Probe Set, AC285 SureGrip Large Jaw
Alligator Clip Set, 80BK Integrated
Temperature Probe, RPM80 Inductive Pickup Probe, C800 Hard Case, User's Manual +
Quick Reference Guide
Fluke 78: C70Y Holster, TL75 Test Lead Set,
AC72 Alligator Clip Set, 80BK Integrated
Temperature Probe, User's Manual + Quick
Reference Guide
Voltage DC
Voltage AC
Current DC
Current AC
Resistance
Capacitance
Frequency
Temperature
Range
300V
300V
10A
10A
40MΩ
Fluke 78
Resolution
0.1mV
1mV
1mA
10mA
0.1Ω
Accuracy
0.3%
2.5%
1%
2%
0.5%
100kHz
1000ºC
0.01Hz
1ºC
0.1%
1%
Battery Life: 88V – Over 400 hours typical
(alkaline)
78 - 2000 hours typical
Range
1000V
1000V (5 kHz)
10A
10A
40Ω
10mF
200kHz
1090ºC
Fluke 88V
Resolution
0.1mV
0.1mV
0.1µA
0.1µA
0.1Ω
0.01nF
0.01Hz
0.1ºC
Accuracy
0.1%
0.5%
0.4%
1.2%
0.4%
1%
0.005%
1%
Weight: 88V – 0.36 kg; 78 – 0.34 kg
Lifetime Warranty
Size (HxWxD): 88V – 186 mm x 86 mm x 32 mm
78 - 166 mm x 75 mm x 28 mm
Recommended Accessories
Ordering Information
Fluke 88V/A Automotive Meter Combo Kit
Fluke 78
Automotive Meter
TLK-282
See page 65
22
90i-610s
See page 65
80PK-27 (requires 80AK)
See page 68
PV350
See page 65
www.tti.co.uk
Tel: 01480 412451
867B Graphical Multimeter
High performance multimeter with
advanced graphics and reporting
capabilities
The Graphical™ Multimeter combines the
industry’s most advanced multimeter
capabilities with the visual power of trend
graphing and waveform display,
component testing, and logic checking
together in one easy-to-use, handheld
instrument.
The Fluke 867B features:
• 0.025% dc accuracy for critical
measurements
• Big, bold GMM display, shows multiple
numeric readings and waveforms
simultaneously.
• Optically isolated, RS-232 interface for
•
•
printing and transferring measurement
data, FlukeView™ 860 software provides
a communication link with PC’s, for
documentation, analysis and storage.
TrendGraph™ works like an electronic
chart recorder, plotting high resolution
meter readings for up to 30 hours, in
intervals from 1 second to 15 minutes
Component test for checking component
signatures on resistors, capacitors,
semiconductors and more
Features
867B
Digital Display/Counts
True-RMS Measurements
High Impedance Input
Resistance/Conductance/Capacitance/Continuity
Min/Max/Avg with Time Stamp
Relative Mode
dB
Logic Activity
Component Test
Bright Backlight
Rechargeable Batteries/Line Adapter
Waveform memory
Fluke 867B
30 000
●
●
●
●
●
●
●
●
●
●
●
Specifications
Function
Range & Resolution
Voltage DC
Voltage AC
Current DC
300.00mV, 3.000V, 30.000V, 300.00V, 1000.0V
300.00mV, 3.000V, 30.000V, 300.00V, 1000.0V
300.00µA, 3000.0µA
30.000mA, 300.00mA, 3.000A, 10.000A
300.00µA, 3000.0 µA
30.000mA, 300.00mA, 3.000A, 10.000A
300.00Ω, 3.0000kΩ, 30.000kΩ, 300.00kΩ,
3.0000MΩ, 30.000MΩ
10000pF, .1000µF, 1.000µF, 10.00µF, 100.0µF,
1000µF, 10000µF
2 - 1200 Ohm References
1000.00Hz, 10.0000kHz, 100.000kHz,
1.00000MHz, 2.0000MHz
Current AC
On all inputs
Resistance
True RMS
Capacitance
Included Accessories
TL71 test leads and users manual.
BP7217 Battery Pack and BE860
Battery Eliminator.
Ordering Information
Fluke 867B Graphical Multimeter
SC860
FlukeView 860 Software and
optically-isolated RS-232 cable
(PM9080)
dB/dBm
Frequency
Meter VAC bandwidth
10.0000MHz
300kHz
Best Accuracy
867B
±(0.025% + 2)
±(0.5%+4)
±(0.1%+2)
±(0.05%+15
±(0.75%+10)
±(0.75%+10)
±(0.7%+2)
±(1.9%+2)
±0.5dB
±(0.05%+1)
±(0,05% + 1)
Range & Resolution: If selected range is 3.000V the resolution is 0.001V in that range
Size (HxWxD): 246.4 mm x 137.2 mm x 69.9 mm
Weight: Without batteries: 1.1 kg. With battery pack: 1.4 kg
Three Year Warranty
Recommended Accessories
C789
See page 70
TL81A
See page 64
TL910
See page 64
i410/i1010
See page 67
SC860
23
45 Dual Display
Bench Multimeter
www.tti.co.uk
Tel: 01480 412451
Maximum versatility in a single instrument
Fluke 45
The Fluke 45 is a feature-rich 5-digit,
100 000 count meter that truly fits all
applications and virtually any measurement
need - on the workbench or in the field.
Two multifunction displays and 16 different
measurement capabilities allow wide
ranging versatility.
The Fluke 45 delivers high performance
and flexibility for manufacturing test, depot
and field service, as well as R&D
applications.
Use optional FlukeView® Forms software to
communicate through the Fluke 45’s
standard serial port.
Features
45
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Multifunction Vacuum Fluorescent Dual Display
True-RMS Voltage and Current Measurement, Including AC + DC
0.05% DC Current Accuracy for 4-20 mA Current Loop Service
Standard RS-232 Interface
Optional IEEE-488.2 Interface
Frequency Measurement to 1 MHz
dB Measurements
Min/Max Mode
Relative Mode
Compare (Hi/Lo/Pass) for Quick In-Tolerance Tests
Closed Case Calibration
Optional: Rack-Mount Kit
Touch Hold®
Diode Test/Continuity
Specifications
True RMS
Included Accessories
Line cord, TL 71 test leads, operator’s
manual, and Quick Reference Guide.
Options
Field/customer installable: Fluke 45-01K
Rechargeable Lead-Acid Battery Kit
Fluke 45-05K IEEE-488.2 Interface Kit
Optional Accessories
M00-200-634
RS40
RS41
Rack Mount Kit
6’ RS-232 Terminal Cable
6’ RS-232 Modem Cable
Ordering Information
Fluke 45
Fluke 45-01
Fluke 45-05
Fluke 45-15
FVF-SC3
Dual Display Multimeter
with Factory-Installed
Battery
with Factory-Installed
IEEE-488.2 Interface
with Factory-Installed
Battery and IEEE-488.2
Interface
FlukeView Forms software
including interface cable
Display: 3000 Counts, 30 000 Counts, 100 000 Counts
Reading Rates: Fast (20 times per second), Medium (5 times per second), Slow (2.5 times per second)
Function
Range
Best Accuracy
Resolution
(medium reading rate)
Voltage DC
300mV-1000V
±0.025% + 2
1 µV-0.01V
Voltage AC
300mV-750V
±0.2% + 10
1 µV-0.01V
(True-RMS, AC Coupled)
Freq. 20 Hz-100 kHz
dB Readout
-34-+60
±0.08 dBm
0.01 dB-0.1 dB
(600 Ω Ref.)
(Ref. Z 2Ω -8000Ω)
Current DC
30 mA-10A
±0.05% + 2
0.1 µA-10 mA
Current AC
10 mA-10A
±0.5% + 10
0.1 µA-10 mA
(True-RMS, AC Coupled)
Freq. 20 Hz-20 kHz
Resistance
300Ω-100 MΩ
±0.05% + 2
0.001Ω-1 MΩ
Frequency
5 Hz->1 MHz
±0.05% + 1
0.01 Hz-1 kHz
Range & Resolution: If selected range is 100.000mV the resolution is 0.001mV
in that range
Size (H x W x D): 216 mm x 93 mm x 286 mm
Weight: Net 2.4 kg; with battery 3.2 kg
One Year Warranty
Recommended Accessories
TL81A
See page 64
24
TL910
See page 64
TL40
See page 64
TLK-225
See page 62
FVF-SC3
See page 72
www.tti.co.uk
Tel: 01480 412451
Electrical Testers and
Clamp Meters
Fluke’s wide range of electrical testers and clamp meters bring you
operational simplicity without sacrificing versatility. Ideal for making
quick measurements in tight spaces, our electrical testers offer many
innovative features including automatic range selection, and are
designed for convenient one-handed operation. For non-contact
current measurement our handy clamp meters feature wide-opening
jaws that make them safer and faster to use.
25
www.tti.co.uk
Tel: 01480 412451
T3/T5 Electrical Testers
The fast and easy solution to basic
electrical testing
Fluke T3 Voltage and Continuity
Tester
Fluke T5-600 and T5-1000 Voltage,
Continuity and Current Testers
The Fluke T3 voltage and continuity tester
is easy to use and is built to last. There are
no settings – just probe the circuit and the
T3 will show whether you are looking at
AC voltage, DC voltage or an open circuit.
Touch the test probes together and it
automatically switches on. The Auto-on
light indicates that the instrument is
working correctly and will automatically
turn off after approximately 8 minutes of
inactivity.
Seven LED voltage indicators differentiate
between key voltage levels.
The Fluke T5 testers let you check voltage,
continuity and current with one compact
tool. Select volts, ohms or current and the
instrument does the rest. Model T5-600
measures 600 volts AC/DC, model T5-1000
is designed for 1000 volts. OpenJaw™
current technology lets you check current
up to 100 A, without breaking the circuit.
The optional H5 holster keeps the test
probes and leads ready to test and lets you
clip the T5 onto your belt.
Fluke T3
Features
T3
LED
T5-600
LCD
T5-1000
LCD
Automatic Selection
●
●
●
Continuity Beeper
●
●
●
DC polarity indicator
●
●
●
Auto off
●
●
●
Display
Fluke T5-1000
Specifications
T3
690 V*
220 V*
Voltage AC
Voltage DC
Current AC
Continuity
Resistance
Safety rating
< 20 Ω
1000 V CAT III
T5-600
600 V
600 V
100 A
< 25 Ω
1000 Ω
600 V CAT III
T5-1000
1000 V
1000 V
100 A
< 25 Ω
1000 Ω
1000 V CAT III
* Voltage levels will vary depending on country of intended use.
Included Accessories
T3
Battery life: 350 hours
Size (HxWxD):
160 mm x 45.7 mm x 33 mm
Weight: 0.2 kg
One year warranty
T3: 4 mm probes and instruction sheet
T5-600 and T5-1000:
TP4 4 mm detachable probes (detachable
GS38 probes for the UK) and instruction sheet
Ordering Information
Fluke T3
Fluke T3-1AC Kit
Fluke T5-600
Fluke T5-1000
Fluke T5-H5-1AC Kit
Electrical Tester
Electrical Tester Kit
with 1AC
Electrical Tester
Electrical Tester
Electrical Tester Kit
with Holster and 1AC
Buy Electrical Tester Kits and Save
T5-H5-1AC Kit
• T5-1000 Electrical Tester
• H5 Holster
• 1AC VoltAlert for free
T3-1AC Kit
• T3 Electrical Tester
• 1AC VoltAlert
• Save 15%
Recommended Accessories
H5 (T3 and T5)
See page 71
26
T5-600/T5-1000
Battery life: 400 hours
Size (HxWxD):
203 mm x 51 mm x 30.5 mm
Weight: 0.38 kg
Two year warranty
ACC-T5-Kit (T5)
See page 62
AC285 (T5)
See page 63
TP38 (T5)
See page 63
L210 (T5)
See page 72
T100 Series
Voltage and Continuity Testers
The fast and easy solution to voltage,
continuity and resistance measurements
New
Ideal for site conditions, the 3 models of
the T100 Series 2-pole testers have a
rugged construction and ergonomically
formed housing for perfect handling. All
models offer a patented three-phase
rotation detection system providing quick
phase rotation indication.
Moreover they have a special electrical
torch function for working in low light level
environments and have an ingress
protection rating of IP65. The T100 Series
are compliant with EN 61010-1 and
EN61243-3 requirements.
Features
Display
T100
12 LED’s
Bargraph
Fluke T120
T120
31/2 digit LCD
T140
31/2 digit LCD
●
●
Backlight
●
Resistance measurement
●
Voltage test
●
●
●
Optical and acoustical continuity test
●
●
●
Rotary field indication
●
●
●
Single pole test for phase detection
●
●
●
Indication of polarity
●
●
●
Electrical torch function
●
●
●
Fluke T140
Specifications
Fluke T100
Included Accessories
Voltage AC/DC
Continuity
Frequency
Phase Rotation
Resistance measurement
Response time
Size (HxWxD): 240 mm x 56 mm x 24 mm
Case: IP65 (water-jet and dust tight protection)
T100
12 – 690V
0 – 400 kΩ
0 – 400 Hz
100 to 690V
< 0.1s
T120
12 – 690V
0 – 400 kΩ
0 – 400 Hz
100 to 690V
< 0.1s
T140
12 – 690V
0 – 400 kΩ
0 – 400 Hz
100 to 690V
Up to 1999Ω
< 0.1s
Weight: 180 g
Two year warranty
Two 1.5V batteries and instruction sheet
Ordering Information
Fluke T100 Voltage/Continuity Tester
Fluke T120 Voltage/Continuity Tester
Fluke T140 Voltage/Continuity Tester
Not available
in all countries
UK versions are compliant with GS38
27
7-600 Electrical Tester/1AC VoltAlert
Carbon Monoxide Gas Meters
7-600
Electrical Tester
1AC VoltAlert
The Fluke 7-600 is ideal for
first-level electrical troubleshooting.
The compact design and slide switch offer
one-handed operation.
• 4000 count digital display
• Auto Selection simplifies voltage
measurements in power environments.
(4.5V minimum)
• 400 Ohm Range/Continuity beeper.
1AC VoltAlert is the pocket-sized ac line
voltage detector from Fluke. Easy to use just touch the tip to an outlet or cord. When
it glows red, you know there’s voltage in
the line.
• Fits in shirt pocket for convenience
• All outer surfaces are non-conductive for
safety
• Detects voltage without metallic contact
Operating range: 200-600 volts ac
Batteries: Two AAA Alkaline
Size (H): 148 mm
One Year Warranty
Fluke 1AC VoltAlert
5-pack
• Buy 4 get 1 FREE
Specifications (Fluke 7-600)
Range and Resolution
40.00V, 400.0V, 600V
40.00V, 400.0V, 600V
400.0Ω
Functions
DC Volts
AC Volts
Ohms
Fluke 7-600
Fluke 1AC
Battery Life: Alkaline, 650 hours continuous,
sleep mode
Size (HxWxD):
142.3 mm x 70.5 mm x 34.6 mm
Best Accuracy
±(1.5% + 1)
±(2.9% + 3)
±(1.5% + 2)
Weight: 0.286 kg
Two Year Warranty
Carbon Monoxide Meters
CO-220 Carbon Monoxide Meter
The CO-220 Carbon Monoxide Meter makes it easy to take quick
and accurate measurements of CO levels. A large, backlit LCD
display shows CO levels from 0 to 1000 PPM. The MAX Hold
function stores and displays the maximum CO level.
1 year warranty.
CO-210 Carbon Monoxide Probe
Included Accessories
Fluke 7-600: TL75 Hard Point Test Leads,
a 9 volt battery (installed) and owner’s
manual.
CO-210 + CO-220: C50 soft carrying case and
battery.
CO-210: cord to plug into a digital multimeter
As an accessory to a digital multimeter with dc mV inputs. The
Fluke CO-210 displays CO levels from 0 to 1000 PPM. As a standalone device, the LED indicator and beeper trigger with increasing
frequency as the CO level rises.
1 year warranty.
CO-205 Aspirator Kit
Allows flue gas samples up to 371°C to be drawn with the CO-210
or CO-220 for carbon monoxide measurement. 1 year warranty.
Ordering Information
Fluke 7-600
Fluke 1AC
Fluke 1AC-E-5PK
Fluke CO-220
CO-205
CO-210
Electrical Tester
VoltAlert
VoltAlert 5-pack
Carbon Monoxide Meter
Aspirator Kit
Carbon Monoxide Probe
Recommended Accessories
C12A (7-600)
See page 70
28
TL76 (7-600)
See page 63
www.tti.co.uk
Tel: 01480 412451
330 Series Clamp Meters
Take a new look at current measurements
The Fluke 330 Series Clamp Meters offer all
the features you need to fit the way you
work. The small body and jaws fit perfectly
in your hand and into tight places. Meter
controls are positioned so that current
measurements can be done with one hand.
A large backlit display (on most models) is
easy to see and a handy Display Hold
keeps measurements on the display.
Measuring starting current for motors,
lighting, etc. is easy with the in-rush
current function (on most models). All
models are backed up with a 3 year
warranty.
Features
Functions
True-RMS
Fluke 336
Fluke 335
333
334
335
●
336
●
337
●
●
●
●
●
Auto shut-off
●
●
●
●
●
Display Hold
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Display backlight
Motor start-up current
Low battery indication
●
Large jaw
●
Min/Max
●
Current AC/DC
Fluke 337
Fluke 334
Specifications
Fluke 333
Functions
Current AC
Crest Factor
Range
0-400.0A
0-600.0A
0-999.9A
0-600.0A
333
2% ± 5 counts
334
335
336
2% ± 5 counts
2% ± 5 counts
2% ± 5 counts
2.4 @ 500A
2.0 @ 600A
3 @ 500A
2.5 @ 600A
Included Accessories
C33 Soft case, TL75 test leads, 2 AA alkaline
batteries, instruction card and safety
information sheet.
Ordering Information
Fluke 333
Fluke 334
Fluke 335
Fluke 336
Fluke 337
Clamp Meter
Clamp Meter
True-RMS Clamp Meter
True-RMS Clamp Meter
True-RMS Clamp Meter
0-600.0A
0-999.9A
In-rush Current Integration time
Voltage AC
0-600.0V
Voltage DC
0-600.0V
Resistance
0-600.0Ω
0-6000 Ω
Continuity
Frequency
5-400Hz
337
2% ± 5 counts
0-999.9A
True RMS
●
3 @ 500A
[email protected] 600A
[email protected] 1000A
Current DC
2% ± 3 counts
1% ± 5 counts
1% ± 5 counts
1.5% ± 5 counts
1.5% ± 5 counts
≤ 30Ω
100mS
1% ± 5 counts
1% ± 5 counts
1.5% ± 5 counts
1.5% ± 5 counts
≤ 30Ω
Battery Life: Alkaline, 150 hours
Size (HxWxD):
238 mm x 79 mm x 41mm (333, 334 and 335)
251 mm x 79 mm x 41 mm (336 and 337)
2% ± 3 counts
100mS
100mS
100mS
1% ± 5 counts 1% ± 5 counts 1% ± 5 counts
1% ± 5 counts 1% ± 5 counts 1% ± 5 counts
1.5% ± 5 counts 1.5% ± 5 counts 1.5% ± 5 counts
1.5% ± 5 counts 1.5% ± 5 counts
≤ 30Ω
≤ 30Ω
≤ 30Ω
0.5% ± 5 counts
Jaw Opening: 30 mm (333, 334, 335)
42 mm (336, 337)
Weight: 0.312 kg
Three Year Warranty
Recommended Accessories
H3
See page 71
TL223
See page 62
29
www.tti.co.uk
Tel: 01480 412451
320 Series Clamp Meters
Big features, small package
The Fluke 321 and 322 are designed to
verify the presence of load current, ac
voltage and continuity of circuits, switches,
fuses and contacts. These small and rugged
clamp meters are ideally suited for current
measurements up to 400 A in tight cable
compartments.
Model 322 also offers DC voltage
measurements and has a higher resolution
for loads below 40 A.
Features
321
●
322
●
Auto shut-off
●
●
Display Hold
●
●
Low battery indication
●
●
Current AC
●
●
Compact design
Fluke 322
●
Volts DC
Specifications
321
Fluke 321
322
Functions
Current AC
Range
400.0A
Resolution
0.1A
Range
40.00A
400.0A
Resolution
0.01A
0.1A
Voltage AC
0-400.0V
400-600V
0.1V
1V
0 – 400.0Ω
≤ 30Ω
0.1Ω
0- 400.0V
400 – 600V
0 - 400.0V
400 – 600V
0 – 400.0Ω
≤ 30Ω
0.1V
1V
0.1V
1V
0.1Ω
Voltage DC
Resistance
Continuity
Included Accessories
C23 Soft carrying case, TL75 test leads,
(2) AA alkaline batteries, coated instruction
card, safety information sheet.
Ordering Information
Fluke 321
Fluke 322
Fluke 112/322 Kit
Clamp Meter
Clamp Meter
Electricians Combo Kit
Battery Life: 100 hours typical
(2 AAA carbon zinc)
Size (HxWxD): 190 mm x 63 mm x 35 mm
Jaw Opening: 25 mm
321
322
Best Accuracy
1.8% ± 5 counts 1.8% ± 5 counts
(50 - 60Hz)
(50 - 60Hz)
3.0% ± 5 counts 3.0% ± 5 counts
(60Hz – 400Hz) (60Hz – 400Hz)
1.2% ± 5 counts 1.2% ± 5 counts
(50 - 400Hz)
(50 - 400Hz)
1% ± 5 counts
1% ± 5 counts
1% ± 5 counts
Weight: 0.23 kg
Two Year Warranty
Combo Kit
Fluke 112/322 Kit
See page 14
Recommended Accessories
H3
See page 71
30
TL223
See page 62
www.tti.co.uk
Tel: 01480 412451
Installation Testers
The future of installation testing in domestic, commercial and industrial
applications is here! Our ergonomic multifunction testers redefine easeof-use, speed and convenience. Designed for ensuring fixed wiring is
installed according to IEC 60364, they perform all the tests required for
you to verify safety. In addition, Fluke MegOhmMeters allow rapid
testing of insulation resistance with test voltages ranging from 250 V
up to 5000 V.
31
1650 Series Multifunction
Installation Testers
www.tti.co.uk
Tel: 01480 412451
The future of installation testing is here
Fluke 1653
The Fluke 1650 Series testers verify the
safety of electrical installations in domestic,
commercial and industrial applications.
They can ensure that fixed wiring is safe
and correctly installed to meet the
requirements of IEC 60364,
HD 384 and all relevant local standards.
The unique ergonomic design, low weight
and padded neck-strap to free your hands,
make operating a Fluke 1650 multifuction
tester a pleasure. With easy-to-operate
controls and large display with
exceptionally wide viewing angle, it's also
comfortable and safe to use.
•
Fluke 1652
Easy: simply turn the knob, press the
button and see the results
•
Efficient: measure loop impedance
without tripping RCDs, eliminating the
need to bypass them
• Rugged: withstands a one-meter drop
for demanding field use
• Safe: slim probe with test button keeps
your eyes on the panel while probing
hard to reach points
• Comfortable: compact and lightweight
(less than 1.2 kg) for all day testing
• Compliant: meets all relevant standards
including EN 61557 and VDE 0413
Rotary knob labeling is available in six
versions. Select from English, French,
German, Italian, Spanish or a user-friendly
Symbols version.
Fluke xx
Features
Fluke 1651
Fluke 1651 is not available in the U.K. and Ireland.
Measurement functions
Voltage & Frequency
Wiring polarity
Insulation Resistance
57 CO
615
Continuity
Loop & Line Resistance
PFC/PSC (short-circuit current)
RCD tripping time
RCD tripping current level
IANT
PL
M
EN
BS7671 16th Edition IEE Wiring
Regulations IEC 60364.6.61, HD 384
Included Accessories
TP165X Remote Control Probe
TL165X STD Standard Test Lead Set
C1600 Hard Carrying Case
Mains Test Cord
Padded Carrying Strap
Quick Reference Guide
6 AA Cell batteries
Automatic RCD test sequence
Test DC-sensitive RCD’s
Earth Resistance
Phase Sequence Indicator
Other features
Self-test
EN 61557*/VDE 0413 compliant
Illuminated Display
Line voltage indicator
Battery indicator and battery test function
Memory, Interface
Memory (500 measurements)
Computer interface
Time stamp (with FlukeView® Forms)
Software
1651
1652
1653
●
●
500, 1000 V
●
●
●
●
●
●
250, 500,
1000 V
●
●
●
●
●
ramp test
●
●
●
●
50, 100, 250,
500, 1000 V
●
●
●
●
●
ramp test
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
option
* 1651: sections 1, 2, 3, 4, 6, 10
1652: sections 1, 2, 3, 4, 6, 10
1653: sections 1, 2, 3, 4, 5, 6, 7, 10
Ordering Information
Fluke 1651 Multifunction Installation Tester
Fluke 1652 Multifunction Installation Tester
Fluke 1653 Multifunction Installation Tester
Recommended Accessories (Fluke 1653)
ES165X
Earth Spike Test Kit
32
FVF-SC2
See page 72
www.tti.co.uk
Tel: 01480 412451
1650 Series Multifunction
Installation Testers
The future of installation testing is here
Specifications
AC Voltage Measurement
Range
Resolution
Accuracy
50 Hz – 60 Hz
0.8% + 3
Input Impedance
Overload Protection
500 V
0.1 V
3.3 MΩ
660 Vrms
Continuity Testing
Range (autoranging)
Resolution
Test Current
Open Circuit Voltage
Accuracy
20 Ω
0.01 Ω
200 Ω
0.1 Ω
> 200 mA
>4V
± (1.5%+3 digits)
2000 Ω
1Ω
Insulation Resistance Measurement
Model
Test
Insulation
Resolution
Test Current
Accuracy
Voltage
Resistance Range
Slim probe design
Thanks to its slim probe with integral test
button, you can safely make one-handed
measurements on hard to reach points, while
keeping your eyes on the panel.
1653
50 V
10 kΩ to 50 MΩ
0.01 MΩ
1 mA @ 50 kΩ
± (3%+ 3 digits)
1653
100 V
100 kΩ to 20 MΩ
20 MΩ to 100 MΩ
0.01 MΩ
0.1 MΩ
1 mA @ 100 kΩ
± (3%+ 3 digits)
± (3%+ 3 digits)
1653, 1652
250 V
100 kΩ to 20 MΩ
20 MΩ to 200 kΩ
0.01 MΩ
0.1 MΩ
1 mA @ 250 kΩ
± (1.5%+ 3 digits)
1653, 1652, 1651
500 V
100 kΩ to 200 MΩ
20 MΩ to 200 MΩ
200 MΩ to 500 MΩ
0.01 MΩ
0.1 MΩ
1 MΩ
1 mA @ 500 kΩ
± (1.5%+ 3 digits)
+ 10%
1653, 1652, 1651
1000 V
100 kΩ to 200 MΩ
200 MΩ to 1000 MΩ
0.1 MΩ
1 MΩ
1 mA @ 1 MΩ
± (1.5%+ 3 digits)
+ 10%
Loop Impedance Measurement
Range
20 Ω
200 Ω
2000 Ω
PFC. PSC Test
Range
Resolution and Units
Accuracy
RCD Testing
Resolution
0.01 Ω
0.1 Ω
1Ω
Accuracy
± (3% + 10 digits)
0 to 50 kA
1A
I K < 1000 A
I K ≥ 1000 A
0.1 kA
Determined by accuracy of loop resistance and mains voltage measurements
RCD Type
1651
1652
1653
2
AC
G
●
●
●
3
AC
S
●
●
●
4
A
G
●
●
A
S
●
●
1
AC – responds to AC 2G – General, no delay 3S – Time delay 4A - Responds to pulsed signal
Tripping Time Test (∆T)
Current Settings
Multiplier
Test Current Accuracy
Trip Time Accuracy
10, 30, 100, 300, 500, 1000 mA
x 1/2
± 0% - 10%
± (1% Reading + 1 digit)
10, 30, 100, 300, 500, 1000 mA
x1
± 10% - 0%
± (1% Reading + 1 digit)
10. 30 mA
x5
± 10%
± (1% Reading + 1 digit)
Tripping Current (Ramp) Test – Fluke 1653 and 1652 only
Current Range
Step size
Dwell time
Trip Current
Type G
Type S
Measurement Accuracy
300 ms/step
500 ms/step
± 5%
50% to 110% of
10% of I ∆ N
RCD’s rated current
Earth Resistance Test (RE) – Fluke 1653 only
Range
Resolution
Accuracy
200 Ω
0.1 Ω
± (2%+ 5 digits)
2000 Ω
1Ω
± (3.5%+ 10 digits)
1
Professional reports
Up to 500 test results can be stored in the 1653
installation tester. The data stored for each
measurement consists of the test function, user
selectable test conditions and unique references.
Model 1653 has an IR port and adaptor to enable
the results to be uploaded to a computer for
preparing professional reports using (optional)
FlukeView® Forms software.
Battery type: Alkaline supplied. usable with
1.2 V NiCD or NiMH rechargeable batteries
Size (HxWxD): 100 mm x 250 mm x 125 mm
Weight: 1.17 kg
Three Years Warranty
Complete kit
All 1650 models are equipped with detachable
leads that can be replaced in case of damage or
loss. A durable hard case will protect your
instrument in tough field conditions. A probe
with built-in test button comes with every
instrument.
33
www.tti.co.uk
1550B MegOhmMeter
Tel: 01480 412451
Digital insulation testing up to 5000 Volts
The Fluke 1550B is a digital insulation
tester capable of testing switchgear,
motors, generators and cables at up to
5000 V DC. It can be used for a wide range
of tests: from simple spot checks to timed
tests and breakdown tests. Measurement
storage and PC interface software make it
ideal for preventive maintenance.
•
•
•
•
Test voltages of 250 V, 500 V, 1000 V,
2500 V, 5000 V
Capable of testing in 50 V increments
between 250 V and 1000 V and 100 V
increments between 1000 V and 5000 V
Measures 0 to 1 Tera-Ohm
Warning voltage function alerts the user
that line voltage is present and gives the
voltage reading up to 600V AC or DC
•
•
•
•
•
•
•
•
•
Guard system eliminates the effect of
surface leakage current on highresistance measurements
Large digital/analog LCD shows detailed
measurement data
Cable or insulation capacitance
Leakage current
Ramp function (0-5000 V DC) for
breakdown testing
Timer 1 to 99 minutes
Polarization index and dielectric
absorption calculated automatically
99 memory locations store all
measurements parameters
Includes Quicklink 1550B Software and
Optical Interface cable
Fluke 1550B
Specifications
Test Voltage (DC)
Range
Accuracy (+/- reading)
250V
5%
20%
5%
20%
5%
20%
5%
20%
5%
20%
Short circuit current
Bar graph range
Insulation test voltage accuracy
Induced AC mains current rejection
Charging rate for capacitive load
200kΩ to 5GΩ
5GΩ to 50GΩ
200kΩ to 10GΩ
10GΩ to 100GΩ
200kΩ to 20GΩ
20GΩ to 200GΩ
200kΩ to 50GΩ
50GΩ to 500GΩ
200kΩ to 100GΩ
100GΩ to 1TΩ
greater than 1 mA and less than 2mA
0 to 1TΩ
0% to + 10% at 1mA load current
2 mA maximum
5 seconds per µF
Leakage current
Capacitance measurements
1nA to 2mA
0.01µF to 15.00µF
± (5% + 2nA)
Live circuit indicator
30V to 600V
AC/DC, 50/60Hz
1 to 99 minutes; settable in 1 minute
500V
1000V
2500V
5000V
Included Accessories
Test leads, 5000 V-rated probes, Alligator
clips, Interface cable
Quicklink 1550B PC software, soft carrying
case with water-proof bottom, instruction
manual
Ordering Information
Fluke 1550B MegOhmMeter
Timer increments;
indicated to within 1 second
Ramp
0% to 100% of selected test voltage,
or until breakdown.
Operating Temperature: -20°C to 50°C
Storage Temperature: -20°C to 65°C
Relative humidity: 80% at 31°C,
50% at 50°C
Dust/water resistance: IP40
Operating Altitude: 0 to 2,000 mtrs.
34
± (15% rdg + 0.03µF)
± (5% + 2V)
Batteries: 12 volt, lead-acid, rechargeable
Size (HxWxD): 170 mm x 242 mm x 330 mm
Weight: 4 kg (with battery)
Two Year Warranty
www.tti.co.uk
Tel: 01480 412451
1520 MegOhmMeter
Insulation testing you can depend on
• Lo-Ohms function for testing connections
The Fluke 1520 MegOhmMeter is a handy
• Last reading memory display
insulation resistance tester that
• 4 C-cell batteries for up to 5,000 tests
also measures voltage and checks
connections with its Lo-Ohms function.
• Large, backlit LCD with analog bar graph
and digital display
• Three output voltages for insulation
resistance testing: 250V, 500V, 1000V
• Insulation resistance testing up to 4000
MΩ; switches automatically to voltage
measurement when voltage is greater
than 30V AC or 30V DC.
• ac/dc voltage measurement up to 600V
•
•
per EN61557-2, with battery-life
indicator and auto shut-off.
Autodischarge of capacitive voltage
charges
Rugged, splash-proof case with impact
absorbing holster
Specifications
Function
Insulation Resistance
Auto ranges
Fluke 1520
Range
Accuracy
Resolution
4.000 MΩ, 40.00 MΩ,
400.0 MΩ, 4000 MΩ
To 100 MΩ: 2% + 2 counts 0.001 MΩ to 10 MΩ
over 100 MΩ: 10% + 2
counts +1%/GΩ
+ 20%, - 0%
Test voltages
Max. measurement
current
Audible/visible voltage
warning
Lo-Ohms
250V, 500V, 1000V
1 mA
Resistance
Analog bar graph
Audible/visible voltage
warning
Resistance
0 to 40.00Ω
0 to 100Ω
≥30V ac or dc
2% + 2 counts
0.01Ω
Resistance
Analog bar graph
Voltage
Voltage
4 kΩ
0 to 10kΩ
2% + 2 counts
1Ω
0 to 600V ac (50/60 Hz)
2% + 2 counts
1V
≥30V ac or dc
Operating Temperature: -10ºC to +50ºC
Storage Temperature: -40ºC to +70ºC
Humidity (Without Condensation):
75% RH (40ºC)
Dust/ water resistance: IP42 per IEC 529
Operating Altitude: 2,500 meters
Batteries: 4 C size 1.5V alkaline
Size (HxWxD): 241 mm x 108 mm x 72 mm
Weight: 1.1 kg
Three Year Warranty
Included Accessories
TL27 heavy duty test leads, TP74 lantern tip
test probes, AC285 large jaw alligator clips,
protective holster with hand strap, C43
carrying case, instruction manual
Ordering Information
Fluke 1520 MegOhmMeter
Recommended Accessories
SH100
See page 71
TL223
See page 62
TPAK
See page 72
35
www.tti.co.uk
Tel: 01480 412451
Power Quality Tools
Fluke revolutionized single-phase power quality analysis by
combining oscilloscope, multimeter and data recorder functionality in
one dedicated handheld instrument. Now we empower you to pinpoint
three-phase power quality problems faster, safer and in more detail.
36
www.tti.co.uk
Tel: 01480 412451
Power Quality Analyzers
Analyze your power network quickly
Features
434
Application
Inputs
In industry, healthcare, and business
– in fact wherever electrical and
electronic equipment is
indispensable – power quality plays
a critical role in maintaining
continuity. Non-linear loads,
switching, load changes and
equipment problems can result in
poor power quality. Poor power
quality is not only costly in terms of
wasted energy and unnecessary
downtime, it’s also dangerous and
increases risk of equipment failure.
Fluke has an unrivalled range of
power quality analyzers to help you
maintain high-quality power
systems. The tools give you the
power to analyze every parameter,
power-related event or anomaly
faster, safer and in more detail than
ever before.
Measurements
Vrms, Arms, Hz, W, VAR, VA, PF, Cos ϕ (DPF),
Crest Factors
Harmonics and THD (V,A,W), k-factor
Inter-harmonics
kWh and kVARh, kVAh, demand interval
Flicker (Plt, Pst, PF5)
Unbalance
Recorder/AutoTrend
System-Monitor
Real time scope/Phasor diagrams
Dips and swells/Half cycle based
Transient display
Inrush current
EN50160 compliance
IEC61000-4-30, -4-7, -4-15 compliance
Built-in general purpose Scope and DMM
Memory (screens/data)
FlukeView software and interface cable
EN61010 safety rating
433
Three-phase
4 voltage and 4 current
(for 3 phases and neutral)
43B
Single-phase
1 voltage and 1
current
●
●
●
●
●
●
●
●
●/●
●
●/●
●/●
●
●
●
●
50/10
●
Optional*
Optional*
●
●
●/●
●
●/●
●/●
Optional*
Optional*
●
●
25/5 standard
50/10 optional*
Optional*
●
●
600 V CAT IV/1000 V CAT III
●/●/●/●
●
●
20 for screens and
data
Depending on
configuration
600 V CAT III
Optional functionality can be added with upgrade kit. For details see ordering information.
Fluke 43B
A choice of three configurations
Current Clamp
SW43W FlukeView Software
PM9080 Serial Interface Adapter Cable
C120 Hard Case
VPS40 Voltage Probe
Fluke 61 IR Thermometer
VR101S Voltage Event Recorder
43Basic
200 A AC
43B
500 A AC
●
●
●
●
●
43Kit
500 A AC
●
●
●
●
All configurations are delivered with test leads, probes, clips,
battery pack, banana-to-BNC adapter and line voltage adapter/battery charger.
Check the Fluke web site for Technical Specifications
and Application Notes with the Fluke power quality
analyzers.
Three-phase power recorders from
Fluke
The Fluke power recorder series is a
unique range of instruments that increase
your ability to maintain and troubleshoot
your plant’s power quality. They monitor
every aspect of power without blind
spots or gaps, on all conductors in your
3-phase distribution system.
Check the Fluke web for more
information.
37
www.tti.co.uk
Tel: 01480 412451
430 Series Three-phase
Power Quality Analyzers
Pinpoint power quality problems faster, safer
and in greater detail
New
The Fluke 434 and 433 three-phase power
quality analyzers help you locate, predict,
prevent and troubleshoot problems in
power distribution systems. These easy-touse handheld tools have many innovative
features to give you the details to pinpoint
problems faster and safer.
• Complete three-phase troubleshooting
•
•
Fluke 434
•
•
•
•
Fluke 433
True RMS
•
On all inputs
•
•
tool: measures virtually every power
system parameter: voltage, current,
frequency, power, power consumption
(energy), unbalance and flicker,
harmonics and inter-harmonics. Captures
events like dips and swells, transients,
interruptions and rapid voltage changes.
AutoTrend: no time wasted setting up
additional trend graphs while every
measurement is automatically recorded.
Analyzes trends using cursors and zoom
function, while recording continues in the
background.
System-Monitor: gives immediate insight
into power system’s quality. Checks
conformity to limits specified in EN50160
or to own custom limits.
Four channels: simultaneously measures
voltage and current on all three phases
and neutral.
Automatic transient display: captures up
to 40 dips, swells, interruptions or
transients automatically.
Meets the stringent 600 V CAT IV, 1000 V
CAT III safety standard required for
measurements at the service entrance.
Rugged, handheld instrument operates
for more than 7 hours on included
rechargeable NiMH battery pack. Menudriven interface simplifies operation.
Extensive data analysis possibilities.
Cursors and zoom can be used ‘live’
while taking the measurements, or
‘offline’ on stored measurement data. The
stored measurements can also be
transferred to a PC with FlukeView
software (included with Fluke 434).
Complete package includes everything to
get started: 4 current clamps, 5 voltage
test leads and clips, line adapter/battery
charger and hard case.
Complies with IEC 61000-4-30
measurement standards.
AutoTrend - Quickly see the trend
Unique AutoTrend gives you fast insight
into changes over time. Every displayed
reading is automatically and continuously
recorded without having to set up
threshold levels or interval times, or having
to manually start the process. You can
quickly view trends in voltage, current,
frequency, power, harmonics or flicker on
all three phases plus neutral. And you can
analyze the trends using the cursors and
zoom function – even while background
recording continues.
SystemMonitor - Check performance
against EN50160 with ease
With a single push of a button, the unique
System-Monitor gives you an overview of
power system performance, and checks the
compliance of incoming power to EN50160
limits or to your own custom specifications.
The overview is shown on a single screen,
with color-coded bars clearly indicating
which parameters fall outside the limits.
The System-Monitor overview screen gives
instant insight into whether the voltage,
harmonics, flicker, frequency and the number
of dips and swells fall outside the set limits.
AutoTrend automatically records all displayed
parameters in the background.
38
A detailed list is given of all events falling
outside de set limits.
www.tti.co.uk
Tel: 01480 412451
430 Series Three-phase
Power Quality Analyzers
Simple menu structure with logical function
grouping gives fast access to key
measurements.
Measure and record power (W), VA and
VARs. The 434 adds the ability to record
energy consumption.
Track harmonics up to the 50th, and
measure and record THD in accordance
with IEC61000-4-7 requirements
Specifications
(Check the Fluke web for detailed specifications)
Inputs
Number of inputs
Maximum input voltage
Maximum sampling speed
Volt/Amps/Hertz
Vrms (AC+DC)
Vpk
Crest factor
Arms (AC+DC)
Apeak
Crest factor
Hz
50Hz nominal
Vrms (AC+DC) 2
2
Arms (AC+DC)
Harmonic (interharmonic) (n)
Vrms
Arms
Watts
Dips and swells
Harmonics
Fluke 434 plus included accessories
Included Accessories
Power and Energy
C430 Hard case with clamp holders
i400s Current clamps (4x)
TLS430 Test Leads and Alligator Clips
(4 black, 1 green)
BP190 NiMH Battery Pack (installed)
BC430 Battery charger/Line Voltage Adapter
SW43W FlukeView software (Fluke 434 only)
OC4USB Serial Interface Adapter/Cable (USB)
(Fluke 434 only)
WC100 Color localization set
Getting Started (printed)
User Manual (CD-ROM)
Flicker
Unbalance
Transient capture
Inrush mode
AutoTrend recording
Memory
Standards
Ordering information
Fluke 433
Fluke 434
Fluke 433/UGK
Fluke 433/AF*
OC4USB
PM9080
SW43W
Power Quality Analyzer
(three-phase)
Power Quality Analyzer
(three-phase)
Upgrade Kit for Fluke 433
(includes 433AF, OC4USB
and SW43W)
Advanced Functions
Upgrade Kit for Fluke 433
Serial Interface
Adapter/Cable (USB)
Serial Interface
Adapter/Cable (RS232)
FlukeView Software
*Includes:
Inter-harmonics, energy, transient display and inrush
current, data memory extension
DC voltage
THD
Hz
Phase angle
Watt, VA, VAR
kWh, kVAh, kVARh
Power Factor/ Cos ϕ / DPF
Pst (1min), Pst, Plt, PF5
Volts
Current
Volts
Minimum detect duration
Arms (AC+DC)
Inrush duration (selectable)
Sampling
Memory
Recording time
Zoom
Screens
Data
Measurement methods used
4 voltage and current (3 phases + neutral)
1000 Vrms (6kV Peak)
200 kS/s on each channel simultaneously
Measurement range
Accuracy
1…1000 V
± 0.5% of Vnom
1…1400 V
5% of Vnom
1.0 ... > 2.8
± 5%
0…20,000 A
± 1% ± 5 counts
0 - 5500 A
5%
1 … 10
± 5%
42.50 ... 57.50 Hz
± 0.1% of Vnom
0.0% ….100% of Vnom
± 1% of Vnom
1
0 … 20,000 A
± 1% ± 5 counts
DC, 1..50; (Off, 1..49) measured relative to fundamental or to total rms
0.0 … 1000 V
± 5% ± 2 counts
0.0 … 4000 mV x clamp scaling
± 5% ± 5 counts
depends clamp scaling
± 5% ± n x 2% or reading,
± 10 counts
0.0 … 1000 V
± 5% ± 10 counts
0.0 … 100.0 %
± 2.5%
0 … 3500 Hz
± 1 Hz
-360º ... +360º
± n x 1.5º
1
1.0 … 20.00 MVA
± 1.5% ± 10 counts
00.00 …200.0 GVAh1
± 1.5% ± 10 counts
0…1
± 0.03
0.00 … 20.00
±5%
0.0 … 5.0%
± 0.5%
0.0 … 20%
± 1%
± 6000 V
± 2.5% of Vrms
5 µs (200 kS/s sampling)
1
0.000 … 20.00 kA
± 1% of meas ± 5 counts
7.5 s … 30 min
± 20 ms (Fnom = 50 Hz)
Up to 100 readings/s continuous sampling per channel
Up to 3600 min, max and avg points for each reading
Up to 450 days
Up to 12x horizontal zoom
50 on Fluke 434; 25 on Fluke 433
10 on Fluke 434; 5 on Fluke 433
IEC61000-4-30 class A; EN50160; IEC 61000-4-15; IEC 61000-4-7
The advanced functions Interharmonics, Energy, Transients and Inrush are optional for the Fluke 433 and standard
available on the Fluke 434.
1
2
depending clamp scaling
Value is measured over 1 cycle, commencing at a fundamental zero crossing, and refreshed each half-cycle
Battery life: > 7 hours with rechargeable NiMH (installed); Battery charging time: 4 hours typical
Safety: EN61010-1 (2nd edition) pollution degree 2; 1000 V CAT III / 600 V CAT IV
Case: Rugged, shock proof with integrated protective holster, IP51 (drip and dust proof)
Shock: 30 g; Vibration: 3g according to MIL-PRF-28800F Class 2
Operating temperature: 0°C to +50°C
Size (HxWxD): 256 mm x 169 mm x 64 mm; Weight: 2 kg
Three Years Warranty
Recommended Accessories
i2000flex PQ4
See page 76
i1000s
See page 66
80i-110s
See page 67
SW43W
OC4USB
See page 47
39
www.tti.co.uk
Tel: 01480 412451
43B Single-phase Power
Quality Analyzer
The perfect tool for tracking down
single-phase power-related problems
The Fluke 43B is the choice for diagnosing
and troubleshooting power quality and
general equipment failures. Ease to use
thanks to menu selection of the power
modes, it combines the capabilities of a
power quality analyzer, a 20 MHz
oscilloscope, a multimeter and a data
recorder in a single instrument.
current, and power harmonics
• Voltage,
to 51st harmonic
• Up
harmonic distortion (THD)
• Total
• Phase angle of individual harmonics
measure volts and amps on a cycle-by• Continuously
cycle basis for up to 16 days
• Use cursors to read time and date of sags and swells
power factor, COS ϕ, VA and VAR
• Watts,
• Voltage and current waveforms
scope for quick waveform display
• Connect-and-View™
• View voltage and current channels simultaneously
Fluke 43B
Specifications
(Check the Fluke web for detailed specifications)
On all inputs
Menu items
Measurements
Ranges
Volts/Amps/Hz
Volts
Amps
Mains frequency
CF Crest Factor
5.000 V-1250 V
50.00A-50.00 kA
40.0 - 70.0 Hz
1.0 to 10.0
±(1%+10)
± (1%+10)
± (0.5%+2)
± (5%+1)
Power
Watts, VAR, VA
PF, DPF, COS ϕ
250 W-1.56 GW
0.25-0.9
0.90-1.00
± (4%+4)
± 0.04
± 0.03
Harmonics
Volts
Amps
Watts
K-factor
1st
1st
1st
1.0
±
±
±
±
Sags & Swells
Voltage and Current
4 min-16 days selectable
Transient Capture
40 ns pulse width
Up to 40 transients
Select 20/50/100/200%
above or below line voltage
± 5% of full scale
Inrush Current
1sec. to 5 min selectable
1 A to 1000 A
± 5% of full scale
Ohms/Continuity/
Capacitance
Ohms
Capacitance
500.0 Ω to 30.00 MΩ
50.00 nF to 500.0 µF
± (0.6%+5)
± (2%+10)
Temperature
(with accessory)
°C
°F
-100.0°C to 400.0°C
-200.0°F to 800.0°F
± (0.5%+5)
Scope
DC, AC, AC+DC, peak,
peak-peak, Hz, duty cycle,
phase, pulse width,
crest factor
Sampling rate:
Bandwidth:
Voltage BW (Channel 1)
Current BW (Channel 2)
Screen saves
All functions
20 screens
Recording
V/A/Hz, Power, Harmonics,
Ω/Cap, Temperature, Scope
4 min – 16 days selectable
True RMS
Included (replacement)
Accessories
Fluke 43Basic, Fluke43B and Fluke43Kit:
TL24 (TL224) test lead set, AC20 (AC220)
alligator clip set, TP4 test probe set, BP120
rechargeable battery pack, BB120 Shielded
BNC adapter, PM8907 line adapter/charger,
user and application manual.
Fluke43Basic: i200s AC current clamp.
Fluke43B and Fluke 43Kit: 80i-500s AC
current clamp, AC85 (AC285) alligator clip
set, TP1 test probe set, C120 hard carrying
case, PM9080 interface cable, SW43W
FlukeView Software.
Fluke 43B: VPS 40 voltage probe, Fluke 61
IR thermometer
Fluke43 Kit: VR101S voltage event recorder.
to
to
to
to
Accuracy
51st harmonic
51st
51st
30.0
(3%+2) to ± (15%+5)
(3%+8) to ± (15%+5)
(5%+2) to ± (30%+5)
10%
± (2%+10)
25 MS/sec
20 MHz
15 kHz
Select any two parameters
display mode in each
Battery life: Rechargeable Ni-Cd pack (charger included), 4 hrs typical (continuous)
Shock & Vibration: Mil 28800E, Type 3, Class III, Style B.
Operating temperature: 0°C to 50°C; Case: IP51 (dust, drip, waterproof)
Size (HxWxD): 232 mm x 115 mm x 50 mm; Weight: 1.1 kg
Three Years Warranty
Recommended Accessories
Ordering Information
Fluke 43Basic Power Quality Analyzer
(single-phase)
Fluke 43B
Power Quality Analyzer
(single-phase)
Fluke 43Kit
Power Quality Analyzer
(single-phase)
40
C789 (43 Basic)
See page 70
i2000flex
See page 66
i1000s
See page 66
80TK
See page 68
PAC91
See page 47
VR 101S Voltage Event
Recorder System
www.tti.co.uk
Tel: 01480 412451
Set up, plug in, download, and analyze
The Fluke VR101S is the perfect system for
catching sags, swells, transients, outages
and frequency variations on line voltage at
receptacles, where the most sensitive loads
are connected. The VR101S is a starter
system that includes a compact VR101
event recorder, an optical interface cable,
and EventView™ software that turns your
PC into a power quality reporting tool.
Additional VR101 event recorders can be
purchased individually, so you can monitor
several voltage conditions at multiple
locations at once.
To set up a VR101 event recorder, just enter
the event capture limit parameters on your
PC and load them into the recorder.
EventView software and the optical
interface cable make it easy. Then plug the
recorder into the outlet you need to test,
and leave it—there’s no need to leave a
computer hooked up.
The compact recorder stores any voltage
event that goes outside your limits.
The VR101 recorder can store up to as
many as 4000 events and a flashing LED
tells you when events have been captured.
To get data out of the recorder, hook it back
up to your computer. EventView software
can download a complete history of the
events that occurred while the recorder
was plugged into the receptacle. The
software lets you build a detailed report of
sags, swells, transients, outages and
frequency variations with time-stamps and
durations.
Specifications
(Check the Fluke web for detailed specifications)
On all inputs
True RMS
Included Accessories
VR101S:
Optical interface cable
EventView Software
Ordering Information
Fluke VR101S
Voltage Event Recorder
System
Fluke VR101
Voltage Event Recorder
(Note: At least one VR101S is required for
proper operation.)
Electrical (voltage versions, plug style, and manual languages are determined by country
Voltage version
Operating range
Nominal frequencies
Power consumption
120V Version
70V to 140V
50 Hz to 60 Hz
2W
230V Version
140V to 270V
50 Hz to 60 Hz
3W
Sags, Swells & Outage Measurements
Voltage version
Range
Accuracy
Resolution
120V Version
Hot-to-neutral
0 to 200 Vrms
± 2 Vrms
1 Vrms
120V Version
Neutral-to-ground
3 to 200 Vrms
± 2 Vrms
1 Vrms
230V Version
Hot-to-neutral
0 to 400 Vrms
± 4 Vrms
2 Vrms
230V Version
Neutral-to-ground
3 to 150 Vrms
± 2 Vrms
1 Vrms
Transient Measurements, Minimum pulse widh: 1µs
Range
Accuracy
Resolution
Hot-to-neutral
100 to 2500 Vpeak
± (10% reading + 10V) 10V
Neutral-to-ground
50 to 2500 Vpeak
± (10% reading + 10V) 10V
Phase angle
20° to 180°
± 1°
1°
200° to 360°
Time Measurements: Events < 1 second
Accuracy
Resolution
Hot-to-neutral
± 0.5 cycles
0.5 cycles
Neutral-to-ground
± 1 cycle
1 cycle
Frequency Measurement:
Range
Resolution
45...65Hz
0.1 Hz
Events ≥ 1 second (time stamp)
Accuracy
Resolution
± (2 sec/day + 8 sec)
8 sec
Environmental
Operating temperature
-40 to 70° C
Relative humidity
0 to 95% (non-condensing)
Computer Hardware Requirements
IBM PC or 100% compatible, with Windows 3.1 or Windows 95/98/NT/XP or 2000 installed and operating.
At least one free RS-232 serial port. A pointing device (recommended). 2 MB hard drive space. 4 MB RAM
(8 MB for Windows 95/98 or higher).
Memory size: 4000 events
Battery type: 3.5 Lithium (non-replaceable)
Battery life: 7 years
Size (HxWxD): 62 mm x 68 mm x 85 mm
Weight: 0.12 kg
One Year Warranty
41
ScopeMeter® Test Tools
With the original ScopeMeter, we transformed the oscilloscope category
beyond recognition, and we still lead the way today. From rugged
solutions for industrial applications to full-colour models that pack topend bench oscilloscope specifications into hand-held, battery powered
instruments. In short, ScopeMeter provides you with unmatched speed,
performance and analysis power while working on site.
www.tti.co.uk
Tel: 01480 412451
42
www.tti.co.uk
Tel: 01480 412451
ScopeMeter® Test Tools
Oscilloscopes for field applications
Features
199C
Oscilloscope Features
LCD Display
Persistence
Waveform reference
Automatic pass fail testing
Cursors and zoom
Connect-and-View Triggering
Video triggering with line count
Selectable pulse width triggering
Capture and replay of last 100 screens
The ScopeMeter 190 Series of
high-end performance
oscilloscopes have bandwidth
of 60, 100 and 200 MHz and
sample rates up to 2.5 GS/s.
The 190C Series adds a highresolution color display that
has a fast update rate,
waveform pass/fail testing and
a digital persistence mode –
making the analysis of
complex and dynamic signals
much easier.
For industrial electronic or
electro mechanical
applications, the 120 Series
Industrial ScopeMeter, with a
20 or 40 MHz bandwidth and
Connect-and-View™ triggering
for an instant, stable display
will get the job done.
196C
Color
Digital
●
●
●
●
●
●
●
●
●
●
●
●
●
●
199B
196B
192B
●
●
B/W
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
124
123
B/W
Dual Input TrendPlot
Memory for screens and setups
With cursors and zoom
10 screens and setups
Recorder memories, each can store 100
scope screens, a ScopeRecord or a TrendPlot
2 recorder memories
Cursors
●
●
●
●
●
20
●
10
●
●
1000V Independently floating isolated inputs
●
●
●
●
●
Meter measurements: VAC RMS, VAC+DC, VDC,
Ohms, Continuity, Diode, Amps, Temp. (°C, °F)
●
●
●
●
●
Waveform mathematics: A + B, A – B, A x B,
A versus B (X-Y-mode)
Frequency Spectrum Analysis using FFT
Capacitance and frequency measurements
●
●
●
●
●
●
-/●
●
-/●
-/●
-/●
-/●
●/●
●/●
Rugged, Dust and drip proof case.
●
●
●
●
●
●
●
PC and Printer Interface via optically isolated
RS-232 Adapter/Cable (PM9080)
1)
1)
1)
1)
1)
1)
1)
FlukeView® for Windows® Software (SW90W)
1)
1)
1)
1)
1)
1)
1)
● Standard equipped
1) Optional
Specifications
(Check the Fluke web for detailed specifications)
199C
Oscilloscope Specifications
Bandwidth
Maximum real time sample rate
Input sensitivity
Timebase range
Inputs and digitizers
Independently floating isolated
inputs
Max. record length
… in Scope mode:
… in ScopeRecord mode:
Glitch capture
Scope measurements
True RMS multimeter
General Specifications
Line Power
Battery power
Size
Weight
Safety certified (EN61010-1)
Warranty
196C
200 MHz 100 MHz
2.5 GS/s 1 GS/s
199B
196B
192B
124
200 MHz
2.5 GS/s
100 MHz
1 GS/s
60 MHz
500 MS/s
40 MHz
2 mV to 100 V/div
5 mV to 100 V/div
5 ns/div to 2 min/div
10 ns/div to
2 min/div
2 plus external trigger/DMM input
Up to 1000 V between inputs,
references and ground
3.000 points per input
27.500 points per input or more (5 ms/div…2 min/div.)
Up to 3 ns using Pulse Width triggering; 50 ns peak
detect at 5 µs/div. to 1 min/div.
7 cursor+30 automatic
5000 counts, single input
123
20 MHz
25 MS/s
5 mV-500 V/div
10 ns/div to
20 ns/div to
1 min/div
1 min/div
2
512 min/max
points per input
40 nsec
cursors +
26 automatic
26 automatic
5000 counts, dual input
Adapter/Battery charger included
4 hours NiMH
7 hours NiMH
5 hours NiCad
256 x 169 x 64 mm
232 x 115 x 50 mm
2 kg
1.2 kg
1000 V CAT II/600 V CAT III
600 V CAT III
3 years
3 years
Check the Fluke web site for Technical Specifications and
Application Notes for the Fluke ScopeMeters
43
www.tti.co.uk
ScopeMeter® 190 Series
Tel: 01480 412451
Speed, performance and analysis power
For more demanding applications, the
ScopeMeter 190 Series high performance
oscilloscopes offer specifications usually
found on top-end bench instruments. With
up to 200 MHz bandwidth, 2.5 GS/s realtime sampling and a deep memory of 27
500 points per input they’re ideal for
engineers who need the full capabilities of
a high performance oscilloscope in a
handheld, battery powered instrument.
• Dual input – 60, 100 or 200 MHz models
• Up to 2.5 GS/s real time sampling per
input
• Choice between a high resolution Color or
Black and White display
• (NEW) High waveform resolution of
3000 datapoints per channel
• Digital Persistence for analyzing complex
•
•
Fluke 199C
•
•
•
•
Fluke 196C
Fluke 196B
Fluke 199B
Fluke 192B
True RMS
On all inputs
44
•
•
•
•
•
•
•
dynamic waveforms like on an analog
scope (190C Series only)
Fast display update rate for seeing
dynamic behavior instantaneously
Connect&View™ automatic triggering, a
full range of manual triggering modes
plus external triggering.
Automatic capture and replay of 100
screens
27 500 points per input record length
using ScopeRecord mode
Up to 1000 V independently floating
isolated inputs
Waveform reference for visual
comparisons and automatic pass/fail
testing of waveforms (190C Series only)
Vpwm function for motor drive and
frequency inverter applications.
Waveform mathematics: Add, Subtract
and Multiply
(NEW) Frequency Spectrum Analysis
using FFT (190C)
Cursors, zoom and real-time clock
30 automatic waveform measurements
Four hours rechargeable Ni-MH battery
pack
Includes a 5000 count true-RMS
multimeter and a TrendPlot™ paperless
recorder
ScopeMeter for medical
applications
The ScopeMeter 190 Series is also available
optimized for measurements on medical
imaging equipment and video display
systems. For more information please visit
the Fluke web site.
Automatic capture and replay
of 100 screens
Scope users know how frustrating it is to
see an one time anomaly flash by never to
be seen again. Not with the ScopeMeter
190 Series! Now you can look back in time
with a touch of the replay button. In
normal use, the instrument continuously
memorizes the last 100 screens. Each time
a new screen is acquired, the oldest is
discarded. At any moment you can “freeze”
the last 100 screens and scroll through
picture-by-picture or replay as a ‘live’
animation. Cursors can be used for further
analysis. You can even use the advanced
trigger capabilities to capture up to 100
specific events. Two sets of 100 captured
screens with individual time stamps can be
stored for later recall or download to a PC.
www.tti.co.uk
Tel: 01480 412451
ScopeMeter® 190 Series
See dynamic signal
behavior instantaneously
Frequency Spectrum Analysis
190C (New)
FlukeView® Software for
documenting, archiving and analysis
The new Digital Persistence mode helps to
find anomalies and to analyze complex
dynamic signals by showing the waveforms
amplitude distribution over time using
multiple intensity levels and user selectable
decay time - it’s as if you’re looking at the
display of an analog, real time oscilloscope!
A fast display update rate reveals signal
changes instantaneously, useful for instance
when making adjustments to a system
under test.
All 190C Color ScopeMeters include
Frequency Spectrum Analysis on Fast Fourier
Transformation (FFT) analysis as a standard
feature.
This makes it possible to identify the
individual frequency components contained in
a signal. The spectrum analysis function is
also handy to reveal the effects of vibration,
signal interference or crosstalk. An automatic
window function assures optimal windowing,
although you may manually select your
preferred time window.
FlukeView® for Windows® helps you get
more out of your ScopeMeter by:
• Documenting - transfer waveforms,
screens and measurement data from the
ScopeMeter to a PC. Print or import the
data into your report
• Archiving - create a library of waveforms
with your comments for easy reference
and comparison
• Analysis - use cursors, perform spectrum
analysis or export data to other analysis
programs
Pulse width fluctuations are clearly visible
using Digital Persistence
Frequency Spectrum shows an overview of
frequencies contained in a signal.
Fluke ViewScreen
Included Accessories
BC190 Battery Charger
BP190 NiMH Battery Pack
VPS200-G + VPS200-R Voltage Probe
TL75 Hard Point Test Lead Set
user’s manual (CD-Rom)
Ordering Information
Fluke 192B
Fluke 196B
Fluke 199B
Fluke 196C
Fluke 199C
Fluke 192B/S
Fluke 196B/S
Fluke 199B/S
Fluke 196C/S
Fluke 199C/S
SCC190
SW90W
ScopeMeter
(60MHz, 500 MS/s)
ScopeMeter
(100 MHz, 1 GS/s))
ScopeMeter
(200 MHz, 2.5 Gs/s)
Color ScopeMeter
(100 MHz, 1 GS/s)
Color ScopeMeter
(200 MHz, 2.5 GS/s)
192B + SCC 190 kit option
196B + SCC 190 kit option
199B + SCC 190 kit option
196C + SCC 190 kit option
199C + SCC 190 kit option
FlukeView Software,
PM9080 cable, carrying
case for Fluke 190B and
190C Series
FlukeView Software
Thanks to the deeper memory, very small parts of the waveform can be
studied in full detail using “zoom”.
See page 43 for specifications.
Recommended Accessories
SCC190
C195
See page 70
OC4USB
See page 47
i200s
See page 66
SCC198
See page 65
45
www.tti.co.uk
ScopeMeter® 120 Series
Tel: 01480 412451
Three-in-one simplicity
The compact ScopeMeter 120 Series is the
rugged solution for industrial
troubleshooting and installation
applications. It’s a truly integrated test tool,
with oscilloscope, multimeter and
“paperless” recorder in one affordable,
easy-to-use instrument. Find fast answers
to problems in machinery, instrumentation,
control and power systems.
• Dual-input 40 MHz or 20 MHz digital
oscilloscope
• Two 5,000 counts true-RMS digital
multimeters
• A dual-input TrendPlot™ recorder
• Connect-and-View™ trigger simplicity for
hands-off operation
• Shielded test leads for oscilloscope,
resistance and continuity measurements
• 10:1 Voltage Probe included with Fluke
124 for high frequency measurements
• Up to 7 hours battery operation
• 600 V CAT III safety certified
• Optically isolated RS-232 interface
• Rugged, compact case
Fluke 124
Fluke 123
On all inputs
including motordrive and control signals without touching a button. Signal changes
are instantly recognized and settings
adjusted for - once again - a stable display.
Benefit from the speed and convenience
when measuring a number of testpoints in
quick succession.
Use TrendPlot™ to help find
intermittents fast
The toughest faults to find are those that
happen only once in a while: intermittents.
They can be caused by bad connections,
dust, dirt, corrosion or simply broken
wiring or connectors. You may not be
around to see it – your Fluke ScopeMeter
will. In this “paperless recorder” de, you
can plot the minimum and maximum peak
values and average over time – up to 22
days (Fluke 190 Series) or 16 days (Fluke
120 Series). The two inputs can plot any
combination of volts, amps, temperature,
frequency and phase – with time and data
stamp – to help lead you to the cause of
those faults quickly.
Connect-and-View™ triggering for
an instant, stable display
Scope users know how difficult triggering
can be. Wrong settings show unstable and
sometimes wrong results. Fluke’s unique
Connect-and-View recognizes signal
patterns, and automatically sets up correct
triggering. It provides a stable, reliable and
repeatable display of virtually any signal -
True RMS
Included Accessories
PM 8907 line adapter/charger, STL120
shielded test leads set, AC120 Alligator
Clips, HC120 Hook Clips, BB120 shielded
BNC adapter, BP120 NiCad, battery pack
(Fluke 123), BP130 NiMH, battery pack
(Fluke 124), VPS40 Voltage Probe (Fluke
124), user’s manual (cd-rom)
Ordering Information
Fluke 123
Industrial ScopeMeter® (20MHz)
Fluke 123/S Industrial ScopeMeter® (20MHz)
including SCC120 kit option
Fluke 124
Industrial ScopeMeter® (40MHz)
Fluke 124/S Industrial ScopeMeter® (40MHz)
including SCC120 kit option
SCC120
FlukeView Software, PM9080
Cable, Carrying Case Kit for
Fluke 120 series
SW90W
FlukeView Software
Connect-and-View captures even the most
complex motor drive signals
See page 43 for specifications.
Recommended Accessories
SCC120
46
Cursors help you analyze the captured
TrendPlot
C43
See page 70
DP120
See page 47
OC4USB
See page 47
SCC128
See page 65
www.tti.co.uk
Tel: 01480 412451
ScopeMeter® Accessories
Safety designed oscilloscope probes
VPS40
Description
Number and Color
Attenuation
Band Width DC-MHz
Length [m]
Safety. EN 61010-2
CAT II Voltage [V]
Safety. EN 61010-2
CAT III Voltage [V]
ScopeMeter 190 Series
ScopeMeter 120 Series
VPS100/200 series
VPS40
Voltage
Probe Set
One Black
VPS200-R
Voltage
Probe Set
One Red
VPS200-G
Voltage
Probe Set
One Gray
VPS201
Voltage
Probe Set
Red & Gray
VPS100-R
Voltage
Probe Set
One Red
VPS100
Voltage
Probe Set
Red & Gray
VPS250
Voltage
Probe Set
Red & Gray
VPS121
Voltage
Probe
One Black
DP120
Differential
Probe Set
Red & Gray
PM8918/301
Low Pass
Filter Probe
One Blue
10:1
40
1.2
1000
10:1
200
1.2
1000
10:1
200
1.2
1000
100:1
200
1.2
1000
10:1
100
1.2
1000
10:1
100
1.2
1000
10:1
75
2.5
1000
1:1
12
1.2
-
200:1, 20:1
20
1.5
1000
10:1
4 kHz
2.5
-
600
600
600
600
600
600
600
300
600
600
●
●
●
●
●
●
●
●
●
●1)
●
●
●
●
PM9091/9092
Description
Length
CAT III Voltage [V]
ScopeMeter 190 Series
ScopeMeter 120 Series
DP120
PM9091
50 Ω BNC cable set
(1Red, 1Gray, 1Black)
1.5m
300
●
●1)
PM9081
PM9092
50 Ω BNC cable set
(1Red, 1Gray, 1Black)
0.5m
300
●
●1)
PM9082
PM9093
PM9081
Dual Banana plug
male to female BNC
PM9082
Dual Banana jack
male to female BNC
PM9093
Male BNC to dual
female BNC
300
●
●
300
●
●1)
300
●
●1)
1) Using BB 120
RS200
RS200
AS200-R
AS200-G
PM9080
OC4USB
PM9090
PM9094
PAC91
AS200-R
OC4USB
Probe Replacement Set for VPS200, VPS100, VPS40 Probes
Probe Accessory Set, Red for VPS200, VPS100, VPS40 Probes
Probe Accessory Set, Grey for VPS200, VPS100, VPS40 Probes
Optical Interface Adapter Cable for serial port
Optical Interface Adapter Cable for USB Port
Probe Pin Grabber Flexible Clip for VPS200, VPS100, VPS40 Probes
Mini Testhook Set for PM8918 Probes
Printer Adapter Cable
PM9080
PM9090
Battery Packs
PM9086
BP120
BP130
BP190
NiCd Battery Pack for 90 Series
NiCd Battery Pack for 120 Series
NiMH Battery Pack for Fluke 124 (and Fluke 123
firmware V2)
NiMH Battery Pack for 190 + 430 Series
All accessories have a one year warranty
47
www.tti.co.uk
Tel: 01480 412451
Digital Thermometers
For troubleshooting systems where temperature is a critical symptom,
our digital thermometers provide you with laboratory accuracy
wherever you need it. We offer a choice of non-contact, laser-guided
infrared thermometers for safely getting at hard-to-reach, electrically
live or particularly hot targets, and contact thermometers with a full
range of thermocouple probes.
48
60 Series
Infrared Thermometers
www.tti.co.uk
Tel: 01480 412451
Point, press and read temperature
The Fluke 60 Series non-contact
thermometers are the ideal professional
diagnostic tools for quick and accurate
temperature measurements.
These handheld tools are ideal for
measuring surface temperatures of rotating,
hard-to-reach, electricity live or
dangerously hot targets like electrical
motors and – panels, and heating and
ventilation systems.
The laser sighting system guides
measurements to the right target and in
less than a second, the large temperature
display provides a readout of the surface
temperature.
Fluke 68
The 60 Series IR thermometers
feature:
• Laser guided sighting system for easy
targeting with 1% accuracy
• Up to 12 points datalogging with Min,
max average functions
• Up to 50:1 optical resolution
• Choice between models with fixed or
adjustable emissivity
• Backlit display for easy reading in the
dark
• Temperatures up to 760°C
Features
61
63
65
66
68
Flat grip
-18 to 275°C
8:1
●
●
●
Pistol grip
-32 to 535°C
12:1
●
●
●
MAX only
Flat grip
-40 to 500°C
8:1
●
●
●
Min/Max/avg only
●
Pistol grip
-32 to 600°C
30:1
●
●
●
●
●
●
●
Pistol grip
-32 to 760°C
50:1
●
●
●
●
●
●
●
Fluke 66
Fluke 63
Form factor
Temperature range
Optical resolution
Laser beam for accurate targeting
Backlit LCD display
Use selectable °C or °F
MIN/MAX/AVG/DIF readings
Datalogging
Hi/Lo Alarm
Adjustable emissivity
Specifications
61
Fluke 65
Fluke 61
63
65
Range
Response time
Resolution
-18 to 275°C
< 1 second
0.2°C
-32 to 535°C
≤ 0.5 second
0.2°C
Repeatability
Accuracy:
± 2% of reading
or ± 2°C*
For targets at:
± 0.5%
or ≤ ± 1°C*
For targets at:
(assumes ambient
operating temperature
of 23°C)
-18 to -1°C: ± 3°C
-1 to 275°C: ± 2%
of reading or ± 2°C*
-32 to -26°C: ± 3°C
-26 to -18°C: ± 2.5°C
-18 to 23°C: ± 2°C
23°C -510°C: ± 1%
of reading or ± 1°C*
For targets
above 510°C:
± 1.5% of reading
Typical distance
to target
Emissivity
Up to 1m
Fixed at 0.95
Included Accessories
* whichever is greater
Fluke 61: 9V Battery
Fluke 63, 66 and 68: Hard carrying case,
9V batteries
Fluke 65: C50 Soft carrying case and
2 AA batteries
Battery Life:
Fluke 66 and 68:
Fluke 65:
Fluke 63:
Fluke 61:
66
-40 to 500°C
<1 second
0.1°C to 200°C,
1°C over 200°C
± 1% of reading
or ± 1°C*
For targets at:
68
-32 to 600°C
≤ 0.5 second
0.1°C
-32 to 760°C
≤ 0.5 second
0.1°C
± 0.5%
or ≤ ± 1°C*
For targets at:
± 0.5%
or ≤ ± 1°C*
For targets at:
-40 to 0°C: ± 5°C
0 to 100°C: ± 2°C
100 to 500°C: ± 2%
of reading
-32 to -26°C: ± 3°C
-26 to -18°C: ± 2.5°C
-18 to 23°C: ± 2°C
For targets above
23°C:
± 1% of reading
or ± 1°C*
-32 to -26°C: ± 3°C
-26 to -18°C: ± 2.5°C
-18 to 23°C: ± 2°C
For targets above
23°C:
± 1% of reading
or ± 1°C*
Up to 2 m
Up to 1m
5m
8m
Fixed at 0.95
Fixed at 0.95
Digitally adjustable Digitally adjustable
from 0.1 to 1.0 by from 0.1 to 1.0 by
0.01
0.01
20 hours with laser and backlight on 50%
15 hours with laser and backlight activated
10 hours with laser and backlight activated
12 hours with laser and backlight activated
Weight:
Fluke 63, 66 and 68: 0.320 kg
Fluke 65:
0.284 kg
Fluke 61:
0.227 kg
One year warranty
Ordering information
Fluke
Fluke
Fluke
Fluke
Fluke
61 Infrared Thermometer
63 Infrared Thermometer
65 Infrared Thermometer
66 Infrared Thermometer
68 Infrared Thermometer
Size (HxWxD):
Fluke 63, 66 and 68: 200 mm x 160 mm x 55 mm
Fluke 65:
185 mm x 64 mm x 38 mm
Fluke 61:
184 mm x 45 mm x 38 mm
Recommended Accessories
80PR-60
See page 69
H6
See page 71
49
50 Series II Thermometers
Laboratory accuracy. Wherever you go.
The Fluke 50 Series II contact
thermometers offer fast response and
laboratory accuracy (0.05% + 0.3°C) in
a rugged handheld test tool.
•
•
•
•
•
•
Additional features for the 53 and
54 Series II:
• Data Logging up to 500 points of data
with user adjustable recording interval
• Real time clock captures the exact time of
day when events occur
• Recall function allows logged data to be
easily reviewed on the meter display
to be
• IR communication port allows data
exported to optional FlukeView®
Temperature PC software
Large backlit dual display shows any
combination of T1, T2 (52 only), T1-T2 (52
only) plus MIN, MAX, or AVG
Relative time clock on MIN, MAX, and
AVG provides a time reference for major
events
Electronic Offset function allows
compensation of thermocouple errors to
maximize overall accuracy
Readout in °C, °F, or Kelvin (K)
Sleep mode increases battery life
Battery door allows easy battery
replacement without breaking the
calibration seal
Features
Thermocouple types
Number of inputs
Time stamp
Splash/Dust resistant
Dual display with backlight
Min/Max/Avg recording
(T1-T2) True differential
Data logging up to 500 points
IR data port for interface
to PC
Compatible with optional
FlukeView Software
Fluke 54 II
51 II
J,K,T,E
Single
Relative Time
52 II
J,K,T,E
Dual
Relative Time
●
●
●
53 II
J,K,T,E,N,R,S
Single
Time of Day
●
●
●
●
●
●
●
54 II
J,K,T,E,N,R,S
Dual
Time of Day
●
●
●
●
●
●
●
●
●
●
Specifications
Fluke 51 II
Fluke 52 II
Fluke 53 II
Included Accessories
Impact absorbing holster
Two bead probe thermocouples 80PK-1
(54+52)
One bead probe thermocouple 80PK-1
(51+53)
Ordering Information
Fluke 51 II
Fluke 52 II
Fluke 53 II
Fluke 54 II
FVF-SC1
Thermometer
Thermometer
Thermometer
Thermometer
FlukeView Forms
Software including
interface cable
Temperature range:
J-type
Thermocouples
K-type
Thermocouples
T-type
Thermocouples
E-type
Thermocouples
N-type** Thermocouples
R** and S-type** Thermocouples
Temperature accuracy
Above –100°C (-148°F):
J, K, T, E, and N-type**
R** and S-type**
Below –100°C (-148°F):
J, K, E, and N-types
T-type
(-346°F to 2192°F)
(-328°F to 2501°F)
(-418°F to 752°F)
(-238°F to 1832°F)
(-328°F to 2372°F)
(32°F to 3212°F)
± [ 0.05% + 0.3°C (0.5°F) ]
± [ 0.05% + 0.4°C (0.7°F) ]
± [ 0.20% + 0.3°C (0.5°F) ]
± [ 0.50% + 0.3°C (0.5°F) ]
**Only the Fluke Models 53 and 54 Series II thermometers are capable of measuring N, R, and S-type thermocouples.
Battery life: 1000 hours typical, AA
Size (HxWxD): 173 x 86 x 38 mm
Weight: 0.4 kg
Three Year Warranty
Recommended Accessories
C25
See page 70
50
-210°C to 1200°C
-200°C to 1372°C
-250°C to 400°C
-150°C to 1000°C
-200°C to 1300°C
0°C to 1767°C
80PK-26
See page 68
80PK-25
See page 68
FVF-SCI
See page 72
TPAK
See page 72
www.tti.co.uk
Tel: 01480 412451
Field Calibrators
You’re responsible for testing and calibrating process control
instrumentation. And you want your job done quickly and reliably.
Count on the wide range of Fluke field calibration tools. You can
maintain and calibrate virtually all types of sensors and transmitters.
Whether you want all the required functionality in just one tool or a
dedicated tool for temperature or pressure, or if you need intrinsically
safe versions, the choice is yours.
51
52
743B
300 V
300 V
11 kΩ
110 mA
50 kHz
●1
8
11
15 V
11 kΩ
22 mA
●
50 kHz
8
11
●
●
●
●
24 V
●
3
53
744
300 V
300 V
11 kΩ
110 mA
50 kHz
●1
8
11
15 V
11 kΩ
22 mA
●
50 kHz
8
11
●
●
●
●
24 V
●
●
3
53
●
3
53
24 V
●
●
15 V
11 kΩ
22 mA
●
50 kHz
8
11
8
11
50 kHz
●1
300 V
300 V
11 kΩ
110 mA
741B
●
3
54
24 V
●
10 V
3200 Ω
24 mA
●
10 kHz
7
10
7
10
●
3
55
24 V
7
10
10 V
3200 Ω
7
10
3200 Ω
24 mA
3200 Ω
24 mA
10 kHz
●1
30 V
724
●
3
56
9
75 mV
9
75 mV
714
712
●
3
56
7
3200 Ω
7
3200 Ω
Temperature Calibrators
30 V
725
Multifunction
Process
Calibrator
24 mA
717
24 V
●
3
57
●
718Ex
●
3/1
57
●
●
24 V/-
●
●
100G:7 bar 2 100G:7 bar 2
30G: 2 bar 2 30G: 2 bar 2
24 mA
718/718Ex
Pressure Calibrators
●
3
58
24 V
24 mA
10 V
24 mA
10 V
715
707Ex
●
3/1
58
24 V
24 mA
●
24 mA
28 V
707/707Ex
Loop Calibrators
●
3
58
24 V
24 mA
●
24 mA
28 V
705
787
●
3
59
24 V
●
●
24 mA
●
●
3
59
●
●
24 mA
●
1000 V
1000 V
1000 V
1000 V
40 MΩ
40 MΩ
30 mA, 1 A 30 mA, 1 A
●
●
20 kHz
20 kHz
789
ProcessMeters
Tel: 01480 412451
1 Fluke 700 pressure modules required
2 Either the internal sensor or a Fluke 700 pressure module may be used
Temperature: RTD types
Temperature: TC types
Source/Simulate
Voltage DC
Resistance
mA DC/% scale
mA source; auto step, auto ramp
Frequency
Temperature: RTD types
Temperature: TC types
Record
Min/Max
Hold
As Found/As Left results
Log data
Upload data to PC
Remote operation
Features
Loop supply
Hart communication
Integrated hand pressure pump
Intrinsically safe (ATEX)
NIST traceable certification
Warranty in years
See catalog page
Model
Measure
Voltage DC
Voltage AC (true RMS)
Resistance
Current DC
Current AC
Frequency
Pressure
Documenting Process Calibators
www.tti.co.uk
Field Calibrator
Selection Guide
www.tti.co.uk
Tel: 01480 412451
740 Series Documenting
Process Calibrators
Calibrators as versatile as you are
Fluke 743B
Fluke 744
Fluke 741B
The 740 series Documenting Process
Calibrators are rugged, handheld tools for
the calibration and troubleshooting of
process control instrumentation. These
calibrators:
• Calibrate temperature, pressure, voltage,
current, resistance, and frequency
• Simultaneously measure and source
• Automatically capture calibration results
• Document procedures and results to meet
ISO 9000, EPA, FDA, OSHA, and other
government requirements
• Measure/simulate eleven types of
thermocouples and eight RTDs
• Store up to 8,000 readings in data
logging mode (743B +744 only)
• Protected against dirt, dust, and moisture;
unaffected by vibration
• PC interface (743B +744 only)
• Operates in English, French, German,
Italian, and Spanish
• One and two-year calibration cycles
• Four types of built-in automated
calibration procedures; linear transmitter,
square root devices, one and two-point
limit switches
743B: More memory, plus a PC
interface and data logging
741B: A complete documenting
calibrator
The Fluke 743B and 744 are compatible
with Fluke 700SW DPC/TRACK software
and with software from Cornerstone,
Fisher-Rosemont, Honeywell, Yokogawa,
Prime Technologies and On Time Support.
The 741B is the economical choice for
plants that don’t use PCs or that require
traditional paper forms. It has storage
capacity for a day’s calibration and
measurement data. When you’re back at
the shop, recall the data on-screen to fill
out calibration forms.
The 743B has all the capabilities of
the 741B plus a PC interface that lets
you download procedures, lists, and
instructions created with software–or
upload data for printing, archiving, and
analysis. With its expanded memory, the
743B can hold a full week of calibrations
and procedures.
744: Get HART-ability
The Fluke 744 offers all of the capabilities
of the 743B, plus the ability to calibrate,
maintain, and troubleshoot HART
instrumentation with just one tool. This
rugged, reliable tool offers:
• Integrated HART communication
functions, permitting you to monitor,
control, and calibrate HART
instrumentation.
• NiMH battery with 3500 mA hour life and
battery indicator.
Instrumentation Management
Software
Included Accessories
Fluke 741B/743B: TL224 Industrial Test
Leads (2 sets), AC220 Test Clips (2 sets),
TP220 Test Probes (1 set), BP7217 Battery
Pack, BC7217 Battery Charger, Instruction
Manual, NIST Traceable calibration certificate
and data, three-year warranty, serial port
cable (743B only), DPC/TRACK Sample
Version with free PC communication utility
software (743B only).
Fluke 744: TL224 Industrial Test Leads
(2 sets), AC220 Test Clips (2 sets), TP220 Test
Probes (1 set), BP7235 NiMH Battery Pack,
BC7217 Battery Charger, serial port cable,
HART communications cable, DPC/TRACK
Sample Version with free PC communication
utility software, Instruction Manual, HART
Users Manual, NIST Traceable calibration
certificate and data.
Specifications
(Check the Fluke web for detailed specifications)
Function
Measure
Voltage DC
Current DC
Resistance
Frequency
Thermocouples
RTDs
Pressure
0.025% reading + 0.005% full scale
0.01% output + 0.005% full scale
0.01% reading + 0.015% full scale
0.01% output + 0.015% full scale
0.05% reading + 50mΩ
0.01% output + 40mΩ
0.05%
0.01%
0.3°C
0.2°C
0.3°C
0.1°C
To 0.05% of full scale. See Pressure Module specifications.
Operating temperature: -10º C to 50º C
Safety: CAT II 300V
Battery Life: Typically over eight hours
Internal Battery Pack: NiCd, 7.2V, 1700 mAh
Battery Replacement: Via snap-shut door
without opening calibrator; no tools required
Weight: 1.4 kg
Size (HxWxD): 236 mm x 130 mm x 61 mm
Three Year Warranty
Recommended Accessories
Ordering Information
Fluke 741B
Fluke 743B
Fluke 744
700SW
Sourcing
Documenting Process Calibrator
Documenting Process Calibrator
Documenting Process Calibrator
DPC/Track Software
C789
See page 70
TL220
See page 62
80PK-6
See page 68
80PK-25
See page 68
700P27
See page 60
53
725 Multifunction
Process Calibrator
www.tti.co.uk
Tel: 01480 412451
Simply powerful
725 Multifunction Process Calibrator
The Fluke 725 Multifunction Process
Calibrator is a versatile, easy-to-use field
calibrator. Use the measure and source
functions to test and calibrate almost
anything.
• Rugged, reliable design stands up to field
use
• Easy to read measure/source screen lets
you view input and output simultaneously
• Measure volts, mA, RTDs, thermocouples,
frequency, and ohms to test sensors and
transmitters
• Source/simulate volts, mA, thermocouples,
RTDs, frequency, ohms, and pressure to
calibrate transmitters
• Measure/source pressure using any of
29 Fluke 700Pxx Pressure Modules
• Source mA with simultaneous pressure
measurement to conduct valve and I/P
tests
• Support flow meter testing with
frequency and CPM (counts per minute)
functions
• Perform fast linearity tests with auto step
and auto ramp features
• Power transmitters during test using loop
•
•
•
supply with simultaneous mA
measurement
Store frequently-used test setups for later
use
Backlight lets you work in poor light
Remote interface allows benchtop
automated operations
Fluke 725
Features
Simultaneous Function
Capability
24.000 mA DC
24.000 mA DC with loop supply
100.00 mV DC
30.000V DC Measure
20.000V DC Measure 10.000V DC
Source
15 to 3200 Ohms
Thermocouple J, K, T, E, R, S, B,
L, U, N
RTD Ni120; Pt100 (392); Pt100
(JIS); Pt100, 200, 500, 1000 (385)
Pressure Eleven Engineering
Units; use Fluke 700PXX Modules
Frequency; Squarewave, 1 CPM
to10 kHz; fixed amplitude 5V p-p
M = Measure
Channel A
Channel B
M
M
M or S
Function
Measure or Source
Voltage
Range
Resolution
Accuracy
Notes
0 to 100 mV
0.01 mV
0.02% Rdg +
2 LSD
Max load,
1 mA
mA
0 to 10V (source)
0 to 30V (measure)
0 to 24
0.001V
0.001V
0.001 mA
-10.00 mV to +75.00 mV
0.01 mV
Resistance
0Ω to 3200Ω (measure)
15Ω to 3200Ω (source)
1 CPM to 10 kHz
24V DC
J,K,T,E,L,N,U
B,R,S
Ni120 (672)
Pt 100, 200, 500, 1000 (385)
Pt 100 (3916)
Pt 100 (3926)
0.01Ω to 0.1Ω
0.02% Rdg +
2 LSD
0.025% + of range
+ 1 LSD
0.10Ω to 1.0Ω
Max load,
1000Ω
mV
5 digits
N/A
0.1°C
1°C
0.1°C
0.05% + 1 count
10%
to 0.7°C
to 1.4°C
to 0.2° C
Squarewave
M or S
M
M or S
M or S
M or S
M or S
M
M used as S
M or S
Frequency
Loop Supply
Thermocouples
Thermocouples
RTDs
S = Source/Simulate
Included Accessories
TL75 Test Leads, AC72 Test Clips, one pair
of stackable test leads, user’s Manuals.
Ordering Information
Fluke 725
Specifications
Maximum voltage: 30V
Storage temperature: -20°C to 71°C
Operating temperature: -10°C to 55°C
Relative humidity: 90% (10°C to 35°C); 75%
(30°C to 40°C); 45% (40°C to 50°C); 35% (50°C
to 55°C)
Shock: 30g, 11ms, half-sine shock (or 1meter
drop test)
Vibration: Random, 2g, 5-500 Hz
Multifunction Process Calibrator
Recommended Accessories
C125
See page 70
54
Safety: CSA C22.2 No. 1010.1:1992
EMC: EN50082-1:1992 and EN55022:
1994 Class B
Size (HxWxD): 200 mm x 96 mm x 47 mm
Weight: 0.65 kg
Battery: Four AA alkaline batteries.
Battery life: 25 hours typical; battery door
Three Year Warranty
TL220
See page 62
80PK-27
See page 68
TPAK
See page 72
700P27
See page 60
724 Temperature Calibrator
The temperature solution
The Fluke 724 Temperature Calibrator is a
powerful yet easy-to-use calibrator. Use the
measure and source functions to test and
calibrate almost any temperature
instrument.
• Easy to read dual display lets you view
input and output simultaneously
• Measure RTDs, thermocouples, ohms, and
volts to test sensors and transmitters
• Source/simulate thermocouples, RTDs,
volts, and ohms to calibrate transmitters
• Perform fast linearity tests with 25% and
100% steps
• Execute remote tests with auto step and
auto ramp
• Power transmitters during test using loop
•
power supply with simultaneous mA
measurement
Store frequently-used test setups for later
use
Fluke 724
Specifications
Features
Simultaneous Function
Channel A
Capability
24.000 mA DC
M
24.000 mA DC with 24V loop
M
supply
100.00 mV DC
30.000V DC Measure
M
20.000V DC Measure 10.000V DC
Source
0 to 3200 Ohms
Thermocouple J, K, T, E, R, S, B,
L, U, N
RTD Ni120; Pt100 (3926); Pt100
(JIS); Pt100, 200, 500, 1000 (385)
M = Measure
Channel B
Function
Measure or Source
Voltage
Range
Resolution
Accuracy
Notes
0 to 100 mV
0.01 mV
0.02% Rdg +
2 LSD
Max load,
1 mA
mA (measure)
0 to 10V (source)
0 to 30V (measure)
0 to 24
0.001V
0.001V
0.001 mA
Max load,
1000Ω
M or S
mV
-10.00 mV to +75.00 mV
0.01 mV
M or S
M or S
Resistance
0Ω to 3200Ω (measure)
15Ω to 3200Ω (source)
24V dc
J,K,T,E,L,N,U
B,R,S
Ni120 (672)
Pt 100, 200, 500, 1000 (385)
Pt 100 (3916)
Pt 100 (3926)
0.01Ω to 0.1Ω
0.02% Rdg +
2 LSD
0.025% + of range
+ 1 LSD
0.10Ω to 1.0Ω
N/A
0.1°C
1°C
0.1°C
10%
to 0.7°C
to 1.4°C
to 0.2° C
M or S
M or S
S = Source/Simulate
Included Accessories
TL75 Test Leads, AC72 Test Clips, one pair
of stackable test leads.
Loop Supply
Thermocouples
Thermocouples
RTDs
Maximum voltage: 30V
Storage temperature: -20°C to 71°C
Operating temperature: -10°C to 55°C
Relative humidity: 90% (10°C to 35°C); 75%
(30°C to 40°C); 45% (40°C to 50°C); 35% (50°C
to 55°C)
Shock: 30g, 11ms, half-sine shock (or 1meter
drop test)
Vibration: Random, 2g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992
EMC: EN50082-1:1992 and EN55022:
1994 Class B
Size (HxWxD): 200 mm x 96 mm x 47 mm
Weight: 0.65 kg
Battery: Four AA alkaline batteries
Battery life: 25 hours typical; battery door
Three Year Warranty
Ordering Information
Fluke 724 Temperature Calibrator
Recommended Accessories
C25
See page 70
TL220
See page 62
80PK-25
See page 68
80PK-3A
See page 68
55
712/714 Temperature
Calibrators
www.tti.co.uk
Tel: 01480 412451
The clear choice
The Fluke 710 Series Process Calibrators
offer clear new choices in single-function
calibrators. Whatever you want to measure
- temperature, pressure or basic electrical
parameters - you’ll find one of these easyto-carry handheld tools gives you exactly
the functions you need. They combine the
rugged, ready-for-action package of the
proven Fluke 80 Series DMMs with the
easy-to-use pushbutton operation of the
multifunction Fluke 740 Series
Documenting Process Calibrators. These
calibrators are EMI tolerant, dust and
splash resistant, and have a removable
battery door for quick battery changes.
Fluke 714
712 RTD Calibrator
• Measure temperature from RTD output
• Simulate RTD output
• Rosemount pulsed RTD transmitter
compatible
• Operates with seven types of RTDs
• Measure additional RTDs using Ohms
measurement function
• Simulate additional RTDs using Ohms
source function
• °F or °C selectable
• Four shrouded banana jacks
714 Thermocouple Calibrator
• Measure temperature from TC output
• Simulate TC output
• Operable with nine types of
thermocouples
• Calibrate linear TC transmitter with
mV source function
• Selectable °F or °C
• Thermocouple mini-jack termination
• Available as accessories; Fluke 700 TC1
and TC2 Thermocouple Mini-plug Kits
Fluke 712
Specifications
Model
Fluke 712
Fluke 714
Function
Measure/simulate
RTD
Measure/simulate
Resistance
Measure/ simulate
Thermocouple
Measure/ simulate
mV
Range
-200 to 800°C
(Pt 100)
Resolution
0.1°C, 0.1°F
Accuracy
0.33°C, 0.6°F
(Pt 100)
15 Ω to 3200 Ω
0.1 Ω
0.1 Ω to 1 Ω
-200 to 1800°C,
depending on
type (K, -200
to 1370°C)
0.1°C or °F
(1°C or °F; BRS)
0.3°C to 10 µV
-10 to 75 mV
0.01 mV
0.025% +
1 count
Notes
Pt; 100 200 500
1000 (385);
Pt 100 (3926);
Pt 100 (3916) JIS;
Ni 120 (672)
9 TC types:
J K T E R S B per
NIST 175 and
ITS-90, L U per DIN
43710 and IPTS-68
General specifications for Fluke 712/714/715/717/718/718Ex
Included Accessories
Yellow Holster (H80M excl. TPAK), TL75 Test
Leads and AC72 Alligator Clips (excluding
model 714), single 9V alkaline battery and
Instruction Sheet (14 languages)
Ordering Information
Fluke 712 RTD Calibrator
Fluke 714 Thermocouple Calibrator
Maximum voltage: 30 V
Non-operating temperature: -40°C to 60°C
Operating temperature: -10°C to 55°C
Relative humidity: 95% (10°C to 30°C); 75%
(30°C to 40°C); 45% (40°C to 50°C); 35% (50°C
to 55°C)
Operating altitude: 3,000m max
Shock: 1m drop test
Vibration: Random, 2g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992
EMC: EN50082-1:1992 and EN55022:
1994 Class B
712/714:
Size (HxWxD): 201mm x 98 mm x 52 mm
Weight: 0.6kg
Battery: 9V alkaline
Battery Life: 4 to 20 hours, typical, depending
on functions used
Three Year Warranty
Recommended Accessories
C25
See page 70
56
C550
See page 70
TL75 (712)
See page 62
TL220 (714)
See page 62
80PK-24 (714)
See page 68
717/718/718Ex
Pressure Calibrators
www.tti.co.uk
Tel: 01480 412451
Pump up the pressure
717 30G and 100G Pressure
Calibrator
718 30G and 100G Pressure
Calibrator
• Measure pressure, 0.05% of full scale
• Same features as Fluke 717 plus
• Built-in pressure/vacuum hand pump
•
•
•
•
•
•
•
Fluke 718
with internal sensor
- 1/8 NPT pressure fitting
- Compatible with non-corrosive gasses
and liquids
Pressure measurement to 700 bar using
any of the Fluke-700Pxx Pressure
Modules
Wide range of selectable measurement
units for pressure
Current measurement with 0.025%
accuracy and 0.001mA resolution
Simultaneous pressure and current
measurement for easy P/I or I/P testing
24 volt loop power supply
Zero, Min-Max, Hold and Damping
functions
Pressure switch test captures set, reset
and deadband values
with vernier and bleed valve
718Ex 30G and 100G Intrinsically
Safe Pressure Calibrator
• Same features as Fluke 718 (excl. loop
supply)
• For use in explosion endangered areas
• ATEX certified ( II 1G EEx ia IIC T4)
• Compatible with eight intrinsically safe
pressure modules (see page 60)
Specifications
Fluke 718Ex
Function
Measure Pressure1
(internal sensor)
Over pressure 3xFS
Range
Gage 0-2 bar
Vacuum –830
mbar
Resolution
0.0001 bar
Accuracy
0.05%
Full Scale
100G models
Measure Pressure1
(internal sensor)
Over pressure 2xFS
Gage 0-7 bar
Vacuum –830
mbar
0.001 bar
0.05%
Full Scale
All models
29 Pressure
Modules,
2,5 mbar to
700 bar
To 0.001 mbar
per Pressure
Module specs
To 0.025% of
full span, per
Pressure
Module
specs
-830 mbar to
full scale
0 to 24 mA
N/A
N/A
All models
Measure Pressure1
(with Pressure
Modules) Over
pressure per
pressure module
specs
Source Pressure,
built-in pump
Measure mA
0.001 mA
717/718
Loop Supply
24 V DC
N/A
0.025% +
1 count
± 10%
30G models
718-718Ex
Fluke 717
Included Accessories
Fluke 717: Yellow Holster (H80M excl. TPAK),
TL75 Test Leads and AC72 Alligator Clips,
Single 9V alkaline battery (two 9V batteries
in 718), Instructions.
717/718Ex: 718: Yellow Holster, 718Ex: Red
Ex Holster, TL75 Test Leads end and AC72
Alligator Clips, 700ILF In-Line Filter, two 9V
batteries, user manual on CD-ROM.
Notes
Gasses/liquids1
(non-corrosive)
Zero,Min,Max,
Hold,Damp
Gasses/liquids1
(non-corrosive)
Zero,Min,Max,
Hold,Damp
Media
compatibility
per Pressure
Module specs
Zero, Min, Max,
Hold, Damp
Drive; 20 mA
into 1000 Ω for
battery >6.8V;
700 Ω for
battery 5.8
to 6.8V
1 Supported Pressure Units; psi, in. H2O(4°C), in. H2O(20°C), cm H2O(4°C), cm H2O(20°C),
bar mBar, kPa, inHg, mmHg, kg/cm2
2 Fluke 718: non-corrosive gases only
717
For general specifications see page 56
Size (HxWxD): 201 mm x 98 mm x 52 mm
Weight: 0.6 kg
Warranty: Three years
718/718Ex
For general specifications see page 56
Size (HxWxD): 216 mm x 94 mm x 66 mm
Weight: 0.992 kg
Warranty 718: Three years
Warranty 718Ex: One year
Ordering Information
Fluke
Fluke
Fluke
Fluke
Fluke
717
717
718
718
718Ex
30G Pressure Calibrator
100G Pressure Calibrator
30G Pressure Calibrator
100G Pressure Calibrator
30G Intrinsically Safe Pressure
Calibrator
Fluke 718Ex 100G Intrinsically Safe
Pressure Calibrator
Recommended Accessories
C43 (718)
See page 70
C125 (717)
See page 70
80PK-27
See page 68
700P27
See page 60
700LTP
See page 60
57
705/707/707Ex/715
Loop Calibrators
www.tti.co.uk
Tel: 01480 412451
4-20 mA, source, measure, simulate
705 Loop Calibrator
715 Volt/mA Calibrator
• Simultaneous mA and %
• mA accuracy of 0.02%
• Measure, source and simulate mA
• Push button 25% steps for fast, easy
linearity checks
• “Span Check” for fast confirmation of zero
and span
• Selectable slow ramp, fast ramp, and step
function
• 24 volt internal loop supply
• 0 - 20 mA or 4 - 20 mA default start up
• Measure loop current (0-20 mA,
modes
Fluke 705
707 Loop Calibrator
Fluke 715
• Features of the Fluke 705
• “Quick Click” detented rotary knob for
one handed operation
• Higher accuracy: 0.015%
• Mains Voltage Input protection
• 250 Ohm loop resistance for with Hart
•
•
•
•
4-20 mA) signals with 0.015% accuracy
and 0.001 mA resolution
Measure voltage output process signals
from PLCs, transmitters
Source or simulate 24 mA loop current
Source voltage to 100 mV or 10V
24V loop supply with simultaneous
current measurement
707Ex Intrinsically Safe Loop
Calibrator
• Same features as Fluke 707
• For use in explosion endangered areas
• ATEX certified ( II 2 G Eex ia IIC T4)
instrumentation
Specifications
Functions
Voltage measurement
Range
Resolution
Accuracy
Current measurement
Range
Resolution
Accuracy
Fluke 707
Current sourcing
Range
Accuracy
Fluke 707Ex
Drive capability
Loop power while measuring mA
Voltage sourcing
Display current and % of span
Auto step, auto ramp
Span Check
1
Included Accessories
Fluke 705/707: C10 Yellow Holster, TL75 Test
Leads, AC72 Alligator Clips, Single 9V
alkaline battery, Instruction Sheet
Fluke 707Ex: Red Ex-holster, Fluke TL75
Test Leads, AC72 Alligator Clips, Single 9V
alkaline battery, Instruction Sheet
Fluke 715: Yellow Holster (H80M excl. TPAK),
TL75 Test Leads and AC72 Alligator Clips,
Single 9V alkaline battery, Instruction Sheet
Ordering Information
715
0-28 V DC
1 mV
705: 0.025% Rdg + 1 LSD
707/707Ex: 0.015% Rdg + 2 LSD
0-100 mV, 0-10 V
10 µV 1 mV
0.02% Rdg + 2 LSD
0-24 mA
0.001 mA
705: 0.025% Rdg + 2 LSD
707/707Ex: 0.015% Rdg + 2 LSD
0-24 mA
0.001 mA
0.015%
0-20 mA or 4-20 mA1
705: 0.025% Rdg + 2 LSD
707/707Ex: 0.015% Rdg + 2 LSD
705: 1000 Ω @ 24 mA
707: 1200 Ω @ 24 mA
707Ex: 700 Ω @ 20 mA
24 V
N/A
Yes
Yes
Yes
0-20 mA or 4-20 mA1
0.015% + 2 LSD
1000 Ω @ 24 mA
24 V
0-100 mV or 0-10 V
mA or %
No
No
will over-range to 24 mA
Fluke 705, 707, 707Ex
715
Maximum voltage: 30 V (28 V - 707Ex)
Non-operating temperature: -40 to 60ºC
Operating temperature: -10 to 55ºC
Relative humidity: 0 to 90% (0 to 35ºC);
0 to 70% (35 to 55 ºC)
Operating altitude: 3,000 meters max.
Shock and vibration: Per MIL-T-28800 for a
Class 2 Instrument
Safety: CSA C22.2 No. 1010.1: 1992
EMC: EN50082-1:1992 and EN55022: 1994 Class B
Size (HxWxD): 164 mm x 75 mm x 47 mm;
Weight: 0.35 kg
Battery: One 9 V alkaline
Battery life: 18 hours typical, at 12 mA
Warranty: Three years (one year, 707Ex)
For general specifications see page 56
Size (HxWxD): 201 mm x 98 mm x 52 mm
Weight: 0.6 kg
Battery: One 9V alkaline
Battery life: 4 to 20 hours
Warranty: Three years
Recommended Accessories
Fluke 705
Loop Calibrator
Fluke 707
Loop Calibrator
Fluke 707Ex Intrinsically Safe Loop
Calibrator
Fluke 715
Volt/mA Calibrator
C12A (705/707)
See page 70
58
705/707/707 Ex
C25 (715)
See page 70
TL220
See page 62
TL28A
See page 65
TPAK (715)
See page 72
www.tti.co.uk
Tel: 01480 412451
787/789 ProcessMeters
Double your power
The Fluke 787 and 789 ProcessMeters
combine a Digital Multimeter and a Loop
Calibrator in one rugged handheld tool,
giving process technicians double the
power.
The Fluke 789 has a built-in 24 V loop
supply which reduces the need for taking a
separate power supply when doing offline
transmitter testing. The IR communication
port of the Fluke 789 allows data to be
logged to optional FlukeView Software for
graphical analysis and reporting.
Features
Fluke 787
Fluke 789
DMM and Loop Calibrator in one tool
Precision 1000 V, 440 mA True RMS Digital Multimeter
DC current source and Loop Calibrator
24 V Loop power supply
Min/Max / Average / Hold / Relative Modes
Diode Test and Continuity Beeper
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Simultaneous mA and % of scale read-out
Externally accessible battery / fuses
HART mode setting with loop power and a built-in 250 Ω resistor
0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
Infrared I/O serial port
787
789
●
●
●
●
●
●
●
●
●
●
●
●/●
●
●
●
●
●
●
●
●/-
Specifications
True RMS
Included Accessories
787: Yellow Holster (H80M excl. TPAK), TL75
Hard Point Test Lead Set plus AC72 Alligator
Clips, one 9V battery, user manual
789: TL71 Test Lead Set plus AC72 Alligator
Clips, four 9V AA alkaline batteries, user
manual and quick reference guide.
Ordering Information
Fluke 787 ProcessMeter
Fluke 789 ProcessMeter
FVF-SC2 FlukeView Forms Software
including interface cable
Voltage measurements
Range
Resolution
Accuracy
Current measurement
Range
Resolution
Accuracy
Current Sourcing
Range
Accuracy
Other specifications
Max drive capability
Loop power
Resistance measurement
Frequency
Continuity
Span Check
787
789
0-1000 V AC or DC
0.1 mV to 1.0 V
0.1% Rdg+1 LSD (V DC)
0-1000 V AC or DC
0.1 mV to 1.0 V
0.1% Rdg+1 LSD (V DC)
0-1 A
1 mA
0.2%+2 LSD
0-1 A
1 mA
0.2%+2 LSD
0-30 mA
0.001 mA
0.05%+2 LSD
0-30 mA
0.001 mA
0.05%+2 LSD
0-20 mA or 4-24 mA
0.05% of span
0-20 mA or 4-24 mA
0.05% of span
500 Ω
N/A
To 40 MΩ, 0.2%+1 LSD
To 19.999 kHz, 0.005%+1 LSD
Beeps for resistance < 100 Ω
No
1200 Ω
24 V
To 40 MΩ, 0.2%+1 LSD
To 19.999 kHz, 0.005%+ LSD
Beeps for resistance < 100 Ω
Yes
Maximum voltage: 1000 V
Non-operating temperature: -40 to 60ºC
Operating temperature: -20 to 55ºC
Shock: one meter drop test
Vibration: Random, 2 g, 5-500 Hz
789
Size (HxWxD): 203 mm x 100 mm x 50 mm
Weight: 0.6 kg
Battery: Four AA alkaline batteries
Battery life: 14 to 140 hours typical
Warranty: Three years
787
Size (HxWxD): 201 mm x 98 mm x 52 mm
Weight: 0.642 kg
Battery: One 9 V alkaline
Battery life: 12 to 50 hours typical
Warranty: Three years
Recommended Accessories
C125
See page 70
TL220
See page 62
80T-150U
See page 68
i410
See page 67
59
Field Calibrator Accessories
Fluke 700 Series Pressure Modules
• Compatible with Fluke 717, 718, 725 and
74x series.
• Rugged cases protect the modules from
harsh environments
• All modules include NIST traceable
certificate and test data
• ATEX certified Ex versions available
• Ranges from 2.5 mbar to 700 bar.
• Gage, differential, dual (compound),
absolute and vacuum modules
• Very high accuracy: up to 0.025% FS
• Full-accuracy performance for 0°C to 50°C
• Pressure readings update twice per
second, and may be displayed in up to 11
different units
Model
Differential
700P00
700P01/700P01Ex
700P02
700P22
700P03
700P23
700P04
700P24/700P24Ex
Gage
700P05/700P05Ex
700P06/700P06Ex
700P27/700P27Ex
700P07
700P08
700P09/700P09Ex
Absolute
700PA3
700PA4/700PA4Ex
700PA5
700PA6
Vacuum
700PV3
700PV4
Dual
700PD2
700PD3
700PD4
700PD5
700PD6
700PD7
High
700P29/700P29Ex
700P30
700P31
(
II 1 Eex ia IIB T4)
Range (approx.)
Resolution
uncertainty
(23 ± 3°C) (FS)
Reference
High side media
Low side media
2.5 mbar
25 mbar
70 mbar
70 mbar
340 mbar
340 mbar
1000 mbar
1001 mbar
0.001 mbar
0.01 mbar
0.007 mbar
0.007 mbar
0.01 mbar
0.01 mbar
0.1 mbar
0.1 mbar
0.3 %
0.2 %
0.15 %
0.1 %
0.05 %
0.025 %
0.025 %
0.025 %
Dry 1)
Dry
Dry
316 SS
Dry
316 SS
Dry
316 SS
Dry
Dry
Dry
Dry
Dry
Dry
Dry
Dry
316
316
316
316
316
316
316
316
SS
SS
SS
SS
SS
SS
SS
SS
30x
3x
3x
3x
3x
3x
3x
3x
2 bar
7 bar
20 bar
34 bar
70 bar
100 bar
0.1 mbar
0.7 mbar
1 mbar
1 mbar
7 mbar
10 mbar
0.025
0.025
0.025
0.025
0.025
0.025
%
%
%
%
%
%
316
316
316
316
316
316
SS
SS
SS
SS
SS
SS
N/A
N/A
N/A
N/A
N/A
N/A
316
316
316
316
316
316
SS
SS
SS
SS
SS
SS
3x
3x
3x
3x
3x
2x
340 mbar
1000 mbar
2 bar
7 bar
0.01 mbar
0.1 mbar
0.1 mbar
0.7 mbar
0.05
0.05
0.05
0.05
%
%
%
%
316
316
316
316
SS
SS
SS
SS
N/A
N/A
N/A
N/A
316
316
316
316
SS
SS
SS
SS
3x
3x
3x
3x
-340 mbar
-1000 mbar
0.01 mbar
0.1 mbar
0.04 %
0.04 %
316 SS
316 SS
Dry
Dry
316 SS
316 SS
3x
3x
± 70 mbar
± 340 mbar
±1000 mbar
-1000/+2000 mbar
-1000 mbar/+6.9 bar
-1000 mbar/+13.8 bar
0.007 mbar
0.01 mbar
0.1 mbar
0.1 mbar
1 mbar
1 mbar
0.15 %
0.04 %
0.025 %
0.025 %
0.025 %
0.04 %
316
316
316
316
316
316
Dry
Dry
Dry
N/A
N/A
N/A
316
316
316
316
316
316
3x
3x
3x
3x
3x
3x
200 bar
340 bar
700 bar
0.01 bar
0.01 bar
0.07 bar
0.05 %
0.05 %
0.05 %
SS
SS
SS
SS
SS
SS
C276
C276
C276
N/A
N/A
N/A
Fitting material
Max
overpressure2)
SS
SS
SS
SS
SS
SS
C276
C276
C276
2x
2x
1.5x
1) “Dry” indicates dry air or non-corrosive gas as compatible media. “316 S S” indicates media compatible with Type 316 Stainless Steel.
“C276” indicates media compatible with Hastelloy C276.
2) Maximum overpressure specification includes common mode pressure.
Other accessories
700LTP Low-pressure Test Pump
700PRV Pressure Relief Valve Kit
• For low pressure applications
• Vacuum to – 0.85 bar
• Pressure to 2 bar
• With fine-control, adjustable relief valve
700HTH Hydraulic Test Hose
and slow bleed capability
700ILF
In-Line Filter for the
Fluke 718
700PTP Pneumatic Test Pump
• Handheld pressure pump
• Vacuum to -0.8 bar
• Pressure to 25 bar
700HTP Hydraulic Test Pump
• Pressure to 700 bar
60
Fluke 700LTP
Fluke 700PTP
700PCK Pressure Module
Calibration Kit
BP7235 NiMH Battery Pack
BE9005 Battery Eliminator
www.tti.co.uk
Tel: 01480 412451
General Accessories
The best test tools deserve accessories designed and manufactured to
the same high quality and safety standards. So we also provide a
comprehensive range of test leads, probes and clips, current clamps,
temperature accessories and dedicated electronic and automotive
accessories. And to protect your valuable instrument, choose a rugged
Fluke tailor-made holster or case.
61
www.tti.co.uk
Tel: 01480 412451
Industrial Test Leads,
Probes & Clips
Test Leads
Modular Test Leads
TL71 Premium Test Lead Set
TL221 SureGrip™
Extension Lead Set
• One pair (red, black) comfort grip
•
•
probes with silicone
insulated, right-angle
test leads
Recommended for
µV measurements
CAT IV 600 V, CAT
III 1000 V, 10 A
rating. UL listed
TL75 Hard Point™ Test Lead Set
•
•
•
•
•
One pair (red, black) of silicone
insulated leads with straight
connectors on both ends
Reinforced strain relief
Includes one pair (red, black)
of female couplers
Extends test leads by 1.5 m
600 V CAT IV, 1000 V CAT III,
10 A rating. UL listed
TL222 SureGrip™
Silicone Test Lead Set
• One pair (red, black) comfort grip
• DMM test leads (red, black)
•
•
•
•
•
•
probes with PVC insulated,
test leads with rightangle shrouded
banana plugs
Recommended for
general purpose
measurements
CAT IV 600 V, CAT III 1000 V,
10 A rating. UL listed
with safety shrouded, standard
diameter banana plugs
Right angle connector on
both ends
Reinforced strain relief
1.5 meter silicone-insulated
wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating.
UL listed
TL224 SureGrip™
Silicone Test Lead Set
TL76 All-in-one Test Lead Set
• DMM test leads (red, black)
• One pair (red, black) 1.5 meter long
•
•
•
•
silicone test leads with right
angle shrouded banana
plug
Lantern tip (removable) for
use with European wall
sockets (4 mm Ø )
Lantern tip can be removed for
easy access to terminal blocks
(2 mm Ø)
Removable, insulated IC caps allow probing
on closely spaced leads and compliance
with GS38.
Cat IV 600 V, CAT III 1000 V, 10 A rating,
UL listed
•
•
•
•
with safety shrouded,
standard diameter banana
plugs
Right angle connector on one end
and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists
heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating.
UL listed
TL27 Heavy Duty
Test Lead Set
• DMM test leads (red, black)
•
•
•
SureGrip™ accessories are designed to
improve steadiness in slippery hands.
Rubber overmolded surfaces and fingerhugging curves give the user a comfortable,
reliable grip on the accessory so they can
focus on making an accurate measurement.
62
with safety shrouded,
standard diameter banana
plugs
Heavy duty EPDM insulation
Length 1.5 m
CAT III 1000 V, 10 A rating.
UL listed
Kits
TL220 SureGrip™
Industrial Test Lead Kit
Handy all-in-one kit that includes:
• AC220 SureGrip™ Alligator
Clip Set
• TP220 SureGrip™ Test
Probe Set
• TL222 SureGrip™
Silicone Test Lead Set
(right to right)
TL223 SureGrip™
Electrical Test Lead Kit
Handy all-in-one kit that includes:
• AC220 SureGrip™ Alligator
Clip Set
• TP1 Slim-Reach™ Test
Probes (flat bladed)
• TL224 SureGrip™
Silicone Test Lead
Set (straight to right)
TL238 SureGrip™ High
Energy Test Lead Kit
New
Kit includes:
• TP238 SureGrip™ Insulated Tip
Test Probes with less than 4
mm of exposed metal (GS38)
with flexible removable
finger banner
• TP280 20 cm Test Probe
Extenders
• TL224 SureGrip™ Silicone Test Lead
Set
TLK-220 EUR SureGrip™
Accessory Kit
Handy all-in-one kit that
includes:
• AC220 SureGrip™ Alligator
Clip Set
• AC285 SureGrip™ Large Jaw
Alligator Clip Set
• TP74 Slim Reach Test Probe Set (4 mm)
• TL224 SureGrip™ Silicone Test Lead Set
• Large zippered soft case with moveable
divider
TLK-225 SureGrip™
Master Accessory Kit
Kit includes all the SureGrip™
leads and probes in a handy
roll-up pouch:
• AC220 SureGrip™ Alligator
Clip Set
• AC280 SureGrip™ Hook Clip Set
• AC283 SureGrip™ Pincer Clip
Set
• AC285 SureGrip™ Large Jaw
Alligator Clip Set
• TP220 SureGrip™ Test Probe Set
• TL224 SureGrip™ Silicone Test Lead Set
• 6-Pocket Storage Pouch
www.tti.co.uk
Tel: 01480 412451
Industrial Test Leads,
Probes & Clips
Modular Test Probes
Modular Clips
Kits
(for use with Modular Test Leads)
(for use with Modular Test Leads)
ACC-T5-KIT Accessory Kit for
use with T5
TP1, TP4, TP38
SlimReach Test Probe Sets
AC285 SureGrip™
Large Jaw Alligator Clip Set
This kit completes the offering of a
T5 with add-on probes and
carrying case.
• TP220 SureGrip™ Test Probe Set
• AC285 SureGrip™ Large Jaw
Alligator Clip Set
• C33 Soft Meter Case
• One pair (red, black) of slender probes for
closely spaced or recessed terminals
• TP1: Flat blade design to hold
• One pair (red, black) of large alligator
clips with nickel-plated steel jaws
• Multi-purpose tooth pattern grips
•
•
•
•
•
L215 SureGrip™ Kit
with Probe Light and
Extender
• L200 Probe Light
• TP280 20 cm Test
Probe Extenders
• TP220 SureGrip Test Probes
• TL224 SureGrip Silicon Test Lead Set
• Foldable soft pouch with six pockets and
hook-and-loop
Modular Test Probes
•
securely in blade type wall
sockets
TP2: 2 mm diameter tip for
electronics work. Also
compatible with AC72.
TP4: 4 mm diameter tip designed
to fit into IEC wall outlets
TP38: Insulated probe tip
(designed to meet GS38 specs for
United Kingdom).
CAT IV 600 V, CAT III 1000
V, 10 A rating, UL listed
Recommended for use with TL222
and TL224
• One pair (red, black)
• IC insulated cap prevents
shortening of IC legs for
probing high density components or boards
• CAT III 1000 V, 10 A rating. UL listed
(for use with Modular Test Leads)
TP220 SureGrip™ Test Probe Set
• One pair (red, black) of Industrial test probes
• Sharp, 12 mm stainless steel tip provides
reliable contact
• Flexible finger barrier improves
grip
• Recommended for use
•
with TL222 and TL224 test
leads
CAT IV 600 V; CAT III
1000 V, 10 A rating. UL listed
TP74 Lantern Tip Test Probe Set
• One pair (red, black)
• Tips include banana-style spring
•
contacts with nickel-plated
brass ends
CAT III 1000 V, 10 A rating.
UL listed
AC87 Heavy Duty Bus Bar Clip Set
• One pair (red, black) of flat, right
•
TP80 Electronic Test Probe Set
Modular Clips
(for use with Modular Test Leads)
anything from fine gauge wire to
a 20 mm bolt
Recommended for use with TL222
and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating.
UL listed
•
angle design for connecting to
bus bars
Adjustable collar
provides 2 ranges of jaw
openings up to
30 mm
CAT III 600 V, 5 A rating. UL listed
AC89 Heavy Duty Insulation
Piercing Test Clip
• Single probe pierces 0.25 to
1.5 mm insulated wire
• Small pin allows selfhealing of the insulation
• CAT IV 600V, CAT III 1000 V, 5 A rating.
UL listed
AC220 SureGrip™ Alligator Clip Set
•
•
•
•
One pair (red, black) of small, insulated,
nickel plated jaws
Blunt tip grabs round screw heads
up to 9.5 mm
Recommended for use with
TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000
V, 10 A rating. UL listed
AC280 SureGrip™ Hook Clip Set
•
•
•
•
One pair (red, black) of nickel plated clips
Profile narrows to 5.6 mm at tip,
hook opening 6.4 mm at front,
2 mm at base
Recommended for use
with TL222 and TL224 test
leads
CAT IV 600 V, CAT III
1000 V, 3 A rating. UL listed
Push-on Clip
(for use with TL71 and TL75 Test Lead Sets)
AC72 Alligator Clip Set
• Slide-on alligator clips (red, black) for
TL71/TL75
• Jaws provide 8 mm opening
• CAT IV 600 V, CAT III 1000 V,
10 A rating.
UL listed
High Voltage Probes
80K-6 and 80K-40
AC283 SureGrip™ Pincer Clip Set
•
•
•
•
One pair (red, black) of nickel plated
pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use
with TL222 and TL224
test leads
CAT IV 600 V, CAT III
1000 V, 1 A rating. UL listed
A high voltage probe that allows a
multimeter to measure up to
6,000V or 40,000V
respectively.
Intended for low energy applications only
All accessories have a one year warranty
63
www.tti.co.uk
Tel: 01480 412451
Electronic Test Leads,
Probes & Clips
Test Leads
Test Leads
Kits
TL910 Electronic Test Lead Set
TL960 Micro-Hook Test Lead Set
TP920 Test Probe Adapter Kit
• Very small 1 mm tips to access hard to
reach test points
• Probe tip length up to 100
mm, test lead length: 1 m
• Included: 3 sets of
• 1 pair (red, black) of test leads with
• Set of push-on adapters for TL71
and TL75 test probes
• IC test adapters, extended
•
spring loaded gold tips
and 2 sets of stainless
steel tips
CAT IV 600 V, CAT III 1000 V, 3 A
rating
•
•
•
multi-stacking 4 mm banana plugs
and micro-hooks
Micro-hooks attach to
component leads up to 1 mm
diameter
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
•
probe tips, medium alligator
clips (max.opening
7.6 mm)
CAT II 300 V, 5 A rating
TL970 Hook and Pincer Kit
TP912 Replacement Tips for TL910
Patch Cords
• Replacement tips for TL910
• Five sets of gold plated and stainless
TL930 Patch Cord Set (60 cm)
steel tips
TL40 Retractable Tip Test Lead Set
• One pair (red, black) of test leads with
•
•
•
sharp needle point tips adjustable to
desired length from 0 to 76 mm
Extra hard probe tips to
provide long service
life
Flexible silicone insulated test
leads
CAT II 150 V, 3 A rating, UL listed
TL940 Mini-Hook Test Lead Set
•
•
•
•
1 pair (red, black) of test leads with
multi-stacking 4 mm banana plugs
and mini-hooks
Mini-hooks attach to
component leads up to
1.5 mm diameter
90 cm long PVC
insulated leads
30 V rms or 60 V DC, 15 A
• 1 pair (red, black)
•
•
•
multi-stacking 4
mm banana plug
patch cords
Nickel-plated
banana plugs
61 cm long PVC
insulated leads
30 V rms or 60 V DC, 15 A
• Handy all-in-one kit that includes
3 Test Lead Sets:
• TL940 Mini-Hook Test Lead Set
• TL950 Mini-Pincer Test Lead
Set
• TL960 Micro-Hook Test Lead Set
TL80A Basic Electronic Test Lead Kit
• One pair (red, black) each 1 meter long
TL932 Patch Cord Set (90 cm)
silicone test lead set,
alligator clip and probe tip
extender.
C75 soft carrying case
CAT II 300 V. UL listed
• 1 pair (red, black) multi-
•
•
•
•
•
TL81A Deluxe Electronic Test Lead Kit
stacking 4 mm banana
plug patch cords
Nickel-plated
banana plugs
90 cm long PVC insulated leads
30 V rms or 60 V DC, 15 A
• Includes components of TL80, plus one pair
TL935 Patch Cord Kit
(60, 90, 120 cm)
• 3 sets (red and black pairs) of
•
•
•
multi-stacking 4 mm banana
plug patch cords
Nickel-plated banana plugs
60 cm, 90 cm, 120 cm long
PVC insulated leads
30 V rms or 60 V DC, 15 A
•
•
(red, black) each
modular 1 meter long
silicone test lead, test
probe, hook-style and
pinch style clip,
alligator clip, IC probe
tip adapter and spade
lugs
Quadfold soft carrying
case
CAT II 300 V. UL listed
TL950 Mini-Pincer Test Lead Set
• 1 pair (red, black) of test leads with
•
•
•
multi-stacking 4 mm banana plugs
and mini-pincers
Mini-pincers open to
2.3 mm
90 cm long PVC insulated
leads
30 V rms or 60 V DC, 15 A
BP980 Double Banana Plug Kit
H900 Test Lead Holder
• Heavy duty construction
with mounting holes
• Holder has 10 slots for
•
64
wires up to 8 mm in
diameter
Over-all dimensions: 27.9 cm
L x 8.9 cm W x 3.2 cm H
• 5 pair (red, black) of double
4 mm banana plugs
• Each plug has 3.1 mm
•
•
holes for mounting
wires and components
Brass plugs/jack,
beryllium copper
springs
30 V rms or 60 V DC, 15 A
www.tti.co.uk
Tel: 01480 412451
Automotive Accessories
Piercing Clips
Pressure Module
Current Probe
TP81 and TP82 Insulation Piercing
Clip Set
PV350 Pressure
Vacuum Module
90i-610s AC/DC Current Probe (600 A)
• Banana jack accepts all DMM
and banana jack leads
• Available for 4 mm input,
•
modular connection with
TP81 or available as a 2 mm input to slip
onto probe tips with the TP82
Tested to 60 V DC
TP84 Oxygen Sensor Insulation
Piercing Clip
• Compatible with all Fluke
and most popular DMMs
• Digital pressure and
•
•
•
•
vacuum measurements in a
single module
Transducer sealed in 316 stainless steel
compatible with variety of liquids and gases
Measures vacuum to 76 cm Hg
Display results in English (psig or Hg) or
metric (kPa or cm Hg) units
Measures pressure to 500 psig (3447 kPa)
• Current Range: 2 to 600A DC or
AC Peak
• Basic Accuracy (DC to 400Hz):
± (2% of reading + 1A)
• Output Signal: 100A range:
10mV/A 600A range: 1mV/A
• Frequency Range: 40Hz to
400Hz
• Working Voltage: 600V
AC rms
• Maximum Conductor Diameter: 34 mm
• Banana jack accepts all
•
DMM and banana
jack leads (4 mm)
Tested to 60 V DC
Inductive Pick-up
Test Leads
RPM80 Inductive
Pick-up
TL28A Automotive
Test Lead Set
•
•
Probe Pins
• Provides RPM readings
Flexible silicone insulated leads
are heat and cold resistant
Cat I 30 V, 10 A
TP88 Rigid Back Probe Pin Set
• Slides onto test probes measuring
2 mm
• Tested to 60 V DC
TP40 Automotive Back
Probe Pins (five)
• Banana jack accepts all DMM
and banana jack leads (4 mm)
• Tested to 60 V DC
TLK281 SureGrip™ Automotive
Test Lead Kit
Kit contains:
• TP81 Insulation
Piercing Clip Set
• TL224 TM
Suregrip
Silicone Test
Lead Set
• TP220 SuregripTM Test
Probe Set
• AC220 SuregripTMTM Alligator Clip Set
• AC285 Suregrip Large Jaw Alligator Clip Set
• Soft Case
• Allows for hands-free
•
•
•
SCC128
Automotive
Accessory Kit
(120 Series)
SCC198
Automotive
Accessory Kit
(190 Series)
Banana Plugs
BP880 BNC to
Female Double Stacking
Banana Plug
BP881 BNC to Male
Double Stacking Banana
Plug
ScopeMeter
Accessory Kits
TLK282 SureGrip™
Deluxe Automotive
Test Lead Kit
BP880
testing in controlled voltage
environments 500 VRMS
BP881
maximum
Banana plug is nickel-plated, beryllium
copper for low contact resistance
The BNC shell is plated for tarnish resistance
Operating temperature +50°C maximum
Kit contains:
• TP81 Insulation
Piercing Clip Set
• TP40
Automotive Back
Probe Pins (five)
• TL224 SuregripTM
Silicone Test Lead Set
• TP220 SuregripTMTM Test Probe Set
• AC220 SuregripTM Alligator Clip Set
• AC285 Suregrip Large Jaw Alligator
Clip Set
• AC280 SuregripTM Hook Clip Set
• Soft Case
These kits provide a host of accessories that
allow you to easily and quickly make
measurements on automotive electronic
systems using a 120 or 190 Series
ScopeMeter.
All accessories have a one year warranty
65
www.tti.co.uk
Current Clamps
Tel: 01480 412451
AC Models
New
i200
i200s
New
i400
i400s
i1000s
i2000flex
i3000s
Specifications
Nominal current range(s)
i200
200 A
i200s
20 A
200 A
i400
400 A
i400s
40 A
400 A
Continuous AC current range
0.5 A - 200 A
0.1 - 24 A
0.5 A - 200 A
5 A - 400 A
0.5 - 40 A
5 A - 400 A
Highest current
240 A
240 A
1000 A
Lowest measurable current
0.5 A
0.1 A
5A
1% + 0.5 A
1.5%+0.5 A
2%+0.15
Basic accuracy (48-65 Hz)
1)
i1000s
10 A
100 A
1000 A
0.1 A - 10 A
0.1 A - 100 A
1 A - 1000 A
i2000 flex
200 A
2000 A
i3000s
30 A
300 A
3000 A
1 A - 30 A
1 A - 300 A
1 A - 2400 A
1000 A
2000 A
4000 A
0.5 A
0.1
2A
1A
2%+0.15
1%+1 A
1% F.S.
2%+ 2 A
2 A - 200 A
20 A - 2000 A
4000 A
Useable frequency
40 Hz – 10 kHz
40 Hz – 10 kHz
45 Hz - 3 kHz
45 Hz - 3 kHz
5 Hz – 100 kHz
1 Hz – 20 kHz
10 Hz - 100 kHz
Max. working voltage
600 V AC
600 V AC
1000 V
1000 V
600 V AC
600 V AC
600 V AC
Maximum conductor diameter
Output level(s)
20 mm
1 mA/A
20 mm
100 mV/A
10 mV/A
32 mm
1 mA/A
32 mm
10 mV/A
1 mV/A
54 mm
100 mV/A
10 mV/A
1 mV/A
160 mm
10 mV/A
1 mV/A
64 mm
10 mV/A
1 mV/A
0.1 mV/A
Output cable (m)
1.5
2.0
2.5
2.5
1.6
2.3
2.1
Shrouded banana plugs
●
●
●
●
CAT III, 600 V
●
CAT III, 600 V
●
CAT III, 600 V
Batttery, battery life
9 V, >100 h.
●
BNC adapter
●
●
BNC to banana adapter included
Safety
●
CAT III, 600 V
●
CAT III 1000V /
CAT IV 600 V
1)
CAT III, 600 V
CAT III 1000V /
CAT IV 600 V
Basic Accuracy: % reading + floorspec
●
●
●
2
2
●
●
●
●
●
2
2
●
●
●
●
●
2
2
●
●
●
●
●
2
2
●
●
●
●
●
2
2
●
●
●
●
●
2
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
●
●
2
2
2
2
2
2
2
2
2
* For specifications of 90i-610s see page 65
1 For DC only
2 Requires PM 9081 (see page 47)
66
741B/743B/744
●
●
●
2
2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
2
●
●
●
●
●
●
●
●
●
●
●
●
2
●
●
●
●
●
●
1
1
1
1
1
1
789
●
787
●
725
●
724
●
715
190 Series
●
●
●
2
2
●
●
120 Series
867B
●
●
●
2
2
●
●
430 Series
88V
●
●
●
2
2
●
●
43B
83V/87V
2
78
2
1
1
77 III
2
●
●
73 III
2
●
●
45
2
2
●
●
27
2
2
●
●
187/189
●
175/177/179
●
110/111/112
16
AC Models
i200
i200s
i400
i400s
i1000s
i2000flex
i3000s
AC/DC Models
80i-110s
i410
i1010
Other
90i-610s*
CS20MA
700 IV
12
Current Clamp Compatibility Chart
2
2
●
●
●
●
●
2
2
●
●
●
●
●
2
2
●
●
2
●
●
2
●
●
2
●
●
2
2
2
●
www.tti.co.uk
Current Clamps
Tel: 01480 412451
AC/DC Models
80i-110s
i410
i1010
CS20MA
700-IV
Specifications
80i-110s
i410
i1010
CS20MA
700-IV
Hall sensor
10 A, AC/DC
100 A, AC/DC
0.1A – 10 A AC/DC
1 A – 100 A AC/DC
Hall sensor
400 A, AC/DC
Hall sensor
600 A, AC
1000 A, DC
1 A – 600 A, AC
1 A – 1000 A, DC
Current shunt
4 mA – 20 mA
Current shunt
4 mA – 20 mA
0 mA - 20 mA
0 mA - 55 mA
Highest current
140 A – 2 kHz
400 A
1000 A
20 mA
55 mA
Lowest measurable current
0.1 A
0.5 A
0.5 A
0 mA
0 mA
3% + 50 mA (@ 10 A)
3.5% + 0.5 A
2% + 0.5 A
0.1%
0.025%
DC - ≥ 10 kHz
Measurement type
Nominal current range(s),
Continuous current range
Basic accuracy
1)
1 A – 400 A AC/DC
Useable frequency
DC – 100 kHz
DC – 3 kHz
DC – 10 kHz
Zero error adjustment
●
●
●
Max. working voltage
Mazimum conductor diameter
600 V
11.8 mm
Output level(s)
100 mV/A
10 mV/A
600 V
30 mm
2 x 25 mm
1 mV/A
600 V
30 mm
2 x 25 mm
1 mV/A
Battery, battery life
9 V, 55 h
9 V, 60 h
9 V, 60 h
Output cable length (m)
1.6
1.6
1.6
●
CAT III, 600 V
Shrouded panana Plugs
●
CAT II, 600 V
CAT III, 300 V
BNC adapter
Safety
1)
30 V
30 V
10 mV/mA
10 mV/mA
●
●
●
CAT III, 600 V
30 V
30 V
Basic Accuracy: % reading + floorspec
i410 Kit AC/DC Current Clamp
(400A) with soft case
i2000flexPQ4 i2000flex AC
Current Clamp, 4-pack
i1010 Kit AC/DC Current Clamp
(1000A) with soft case
• The perfect accessory for three-phase
• Combination of current clamp with
carrying case
• Zippered soft case with moveable divider
• Soft case is large enough to hold a meter
•
•
measurement tools such as the
Fluke 430 Series
The flex clamps fit around bus bars and
large or hard-to-reach conductors
Buy 4-pack and save 25% on the price
of the individual items
All accessories have a one year warranty
67
www.tti.co.uk
Tel: 01480 412451
Temperature Accessories
DMM Probes
Contact Probes
80PK-22 SureGrip™ Immersion Probe
• Type-K thermocouple for use in
liquids and gels
• Measurement range:
-40 to 1090°C
80PK-27 SureGrip™ Industrial Surface
Probe
• Type-K thermocouple for surfaces in
rugged environment
• Durable ribbon sensor
• Measurement range: 127 to 600°C
80PK-24 SureGrip™ Air Probe
• Type-K thermocouple for use in
•
•
air and non-caustic gas
measurements
Bead protected by
perforated baffle
Measurement range:
-40 to 816ºC
80AK Thermocouple Adapter
• Adapts Type-K thermocouple
•
•
mini-connector to dual
banana plug inputs
Measurement range and
accuracy: probe dependent
Suitable for low voltage applications
(below 30 V AC, 60 V DC)
80BK Integrated DMM Probe
80PK-1 and 80PJ-1 Bead Probe
•
•
•
80PK-1: Type-K thermocouple for
general purpose applications
80PJ-1 operates with
J-type thermometers
Measurement
range:
-40 to 260°C
• Type-K thermocouple with
standard banana jack
• Convenient one piece
construction
• Compatible with DMMs
•
with temperature
measurement functions
Measurement range: -40 to 260ºC
80TK Thermocouple Module
80PK-25 and 80PT-25 SureGrip™
Piercing Probe
• 80PK-25: Type-K
•
•
thermocouple suitable for
food industry, liquids
and gels
80PT-25 operates
with
T-type thermometers
Measurement range:
80PK-25: -40 to 350°C
80PT-25: -196 to 350°C
• Converts a DMM to a thermometer
• For use with type-K
80PK-3A Surface Probe
• Type-K thermocouple for flat or
•
curved surfaces such as
plates and rollers
Measurement
range: 0 to 260°C
•
80T-150U Universal Temperature
Probe
• Compatible with Fluke DMM
• High accuracy, fast reading for low voltage
80PK-8 Pipe Clamp Temperature Probe
• Type-K thermocouple for
80PK-26 SureGrip™ General
Purpose Probe
• Type-K thermocouple with
•
tapered tip for use in air,
non-caustic gas and
surface applications
Measurement range:
-40 to 816ºC
thermocouples in low
voltage applications
(below 24 V AC, 60 V DC)
Measurement range:
-50 to 1000°C
(probe dependent)
•
•
fast temperature and
superheat measurements
of pipe surfaces
Durable ribbon sensor
Measurement range:
-29 to 149°C for pipe
diameters from
6.4 to 34.9mm
•
•
(below 24 V AC, 60 V DC)
applications
Measurement range: 50 to 150°C
Output: 1 mV/°C or 1
mV/°F (switchable)
80PK-9 and 80PJ-9 General
Purpose Probe
• 80PK-9: Type-K thermocouple surface,
air and non-caustic gases
• 80PJ-9 operates with J-type
thermometers
• Measurement
range:
-40°C to 260°C
68
All accessories have a one year warranty
SureGrip™ accessories are designed to
improve steadiness in slippery hands.
Rubber overmolded surfaces and
finger-hugging curves give the user a
comfortable, reliable grip on the
accessory so they can focus on making
an accurate measurement.
www.tti.co.uk
Tel: 01480 412451
Temperature Accessories
Other Temperature Accessories
80CK-M & 80CJ-M type K & J Male
Mini-Connectors
New
•
•
80PR-60 RTD Temperature Probe
•
•
For simulaneously taking contact and noncontact temperature
measurements
with Fluke 66
or 68
Measurement
range: -40 to 260°C
•
•
Thermocouple Plug Kits
700TC1
Isothermal screw terminal for K or J
wire
Suitable for up to
20 guage thermocouple
wire
Color coded to industry
standards
(K-yellow, J-black)
Two per package
A kit of 10 mini-plug
connectors
Type J (black), one
Type K (yellow), one
Type T (blue), one
Type E (purple), one
Type R/S (green), one
Type B or CU (white), one
Type L (J-DIN) (blue), one
Type U (T-DIN) (brown),
one
Type C (red), one
Type N (orange), one
80PK-EXT, 80PJ-EXT and
80PT-EXT Extension Wire Kits
• Extending and repairing J, K ot T-type
thermocouple wires
• Kit includes 3 meters of thermocouple wire
and 1 pair of male/female mini-connectors
• Maximum continuous exposure temperature:
260ºC
• 80PK-EXT is compatible with
700TC2
A kit of 7 mini-plug
connectors
Type J (black), two
Type K (yellow), two
Type E (purple), one
Type T (blue), one
Type R/S (green), one
K-type thermometers,
80PJ-EXT is designed for
J-type thermometers and
PT-EXT for T-type
thermometers
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1
71B/743B/744
●
●
●
●
●
725
1
724
1
715
1
714
1
●
●
●
1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
789
●
●
●
2
787
●
●
●
●
1
705 / 707(Ex)
1
66/68
1
51/52/53/54 II
77 III
1
190 Series
73 III
1
120 Series
45
2
43B
27
2
867B
187/189
1
88V
179
1
87V
175/177
2
83V
110/111/112
1
78
16
Contact Probes
80PK-1 … 80PK-27
80PJ-1, 80PJ-9
80PT-25
DMM probes
80AK
80BK
80TK
80T-150U
Miscellaneous
80CK-M, 80CJ-M
80PK-EXT, 80PJ-EXT
80PT-EXT
700TC1, 700TC2
80PR-60
12
Temperature Probe Compatibility Chart
1
1
●
●
●
●
●
●
●
●
●
●
1) Requires 80TK
2) Requires 80AK
69
www.tti.co.uk
Tel: 01480 412451
Cases and Holsters
Soft Cases
C12A Meter Case
C75 Accessory Case
C789 Meter & Accessory Case
• Zippered carrying case
• Zippered carrying case with
• Large fabric carrying case
C25 Meter Case
C90 Meter Case
C550 Tool Bag
with inside pockets and
belt loop
2 inside pockets
• Zippered carrying case
• Zippered carrying case with
C43 Meter Case
C125/C781 Meter Case
• Steel reinforced frame
• Rugged ballistic cloth with heavy duty
hardware
• Large zippered storage compartment with
25 pockets
• Weather resistant
• Carry all your tools
inside pocket and belt loop
with padding and inside
pocket
to the job
• Zippered carrying case with
• Zippered carrying case with
•
with 3 compartments,
removable handle and
shoulder strap
detachable external pouch
inner front pocket,
removable
handle/shoulder-strap
Ideal for large meters
C195 Case
• Zippered carrying case
C50 Meter Case
• Zippered carrying case
•
with inside pocket belt
loop and inside meter
strap
with storage
compartments
Allows hand or shoulder
use
70
●
●
●
●
●
●
● ●
●
●
●
789
●
●
●
● ●
787
●
741B/743B/744
●
725
●
724
●
●
718(Ex)
705 / 707(Ex)
63/65/68
717
●
●
●
●
51/52/53/54 II
190 Series
120 Series
43B
●
●
●
●
715
●
●
●
● ●
714
●
●
●
●
712
●
● ● ●
For multiple test leads and accessories
●
● ●
●
1520
●
333/334/335/336/337
●
321/322
83V / 87V
●
T3/T5
78
●
867B
77 III
●
73 III
● ●
7-600
27
187/189
●
175/177/179
●
110/111/112
16
Soft Cases
Size (HxWxD) mm
C12A
172 x 128 x 38
C25
218 x 128 x 64
C43
318 x 230 x 90
C50
192 x 90 x 38
C75
179 x 103 x 26
C90
205 x 90 x 72
C125
192 x 141 x 58
C195
231 x 513 x 231
C781
269 x 141 x 90
C789
308 x 256 x 77
C550
333 x 513 x 231
Hard Cases
C20
256 x 154 x 106
C100
397 x 346 x 122
C120
346 x 397 x 128
C190
410 x 474 x 135
C800
230 x 385 x 115
C1600
260 x 390 x 200
Leather Cases
C510
287 x 179 x 106
C520A
256 x 154 x 106
Holsters
C10
154 x 77 x 45
C70Y
186 x 90 x 45
H80M
190 x 95 x 43
Other
H3
231 x 90 x 64
H5
192 x 90 x 38
H6
302 x 178 x 57
SH100
Hanging and Locking Kits (see page 72)
ToolPak
LockPak
12
Cases & Holsters Compatibility Chart
●
●
●
●
●
●
●
For multiple meters, accessories or other tools
●
●
●
●
●
●
●
●
●
●
● ●
● ●
● ● ● ● ●
For multiple meters, accessories or other tools
●
●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● ●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
www.tti.co.uk
Tel: 01480 412451
Cases and Holsters
Hard Cases
Holsters
C20 Meter Case
C10 Meter Holster
H3 Clamp Meter Holster
• Heavy duty case with
• Snap-on yellow holster
• Fabric holster absorbs
•
•
•
•
carrying handle and
accessories storage
compartment
Top cover snaps onto back to serve
as tilt stand
absorbs shocks and protects
meter from rough handling
Includes built-in stand and
hanger loop
shocks and protects meter
from rough handling.
Built-in pocket for lead
storage
Convenient belt-loop with
snap
C70Y Meter Holster
C100 Meter and Accessory Case
•
• Snap-on holster absorbs
Tough polyprophylene case
•
C120 and C190 Cases
• Heavy duty cases with
•
shocks and protects meter
from rough handling.
Flex Stand™ allows meter to
hand, lean or stand for
convenience and best
viewing
Built-in probe and lead storage
H5 Electrical Tester
Holster
• Rugged fabric holster
•
includes flap for lead
storage and built-in belt loop
Fits Fluke T3 and T5 testers
accessory storage
compartments
H80M Holster + Magnetic Hanger
• Snap-on yellow holster
C800 Meter and Accessory Case
• Tough polyprophylene case
• Accessories and manual
compartments
• Detachable lid
•
•
absorbs shocks and
protects meter from rough
handling
Magnet, hook and loop straps
General purpose hanger
H6 Infrared Thermometer
Holster
• Durable nylon holster
• For Fluke 63, 65 and 68 Infrared
Thermometers
Leather Cases
C1600 Meter and Accessories Case
• Rugged molded plastic case
• Deep interior large enough to hold and
protect your tools
• Lift out tray keeps everything organized
• Snap open compartment on
top of lid
C510 Leather Meter Case
C520A Leather Tester Case
• Oiled genuine top grain cowhide
• Rugged construction with heavy duty
• Oiled genuine top grain cowhide
• Oil tanned for long life
• Rugged construction with heavy duty
stitching and reinforced rivets
• Large tool belt loop and top
flap to secure meter
• Holds most Fluke DMMs,
Thermometers, and
Process Calibrators
Shoulder Strap
Meter Cleaners
SH100
Shoulder Strap
MC6 MeterCleaner™ Wipes (6-pack)
stitching and reinforced rivets
• Large tool belt loop and top
flap to secure tester
• Holds Fluke Electrical
Testers
• Shoulder strap for
Fluke 1520
MC50 MeterCleaner™ Wipes
(50-pack)
• Pre-moistened wipe removes dirt, oil and
grease
• One wipe easily cleans one meter
• Safe on rubber, plastic and for environment
(non-toxic)
All accessories have a one year warranty
71
www.tti.co.uk
Tel: 01480 412451
Other Accessories
Fiber Optics
Hanging & Locking Kits
Lights
FOC Fiber Optic Patch Cords
ToolPak (TPAK)
L200 Probe Light
A variety of patch cords allow you to test a
different type of cable
• FOC-ST/ST, FOC-ST/FC, FOC-ST/SC,
FOC-ST/SMA, FOA-ST/STA-Fiber Optic
Coupler for FOC-ST/ST Patch Cords
The meter hanging solution
• Kit includes, universal hanger clips (2), hook
& loop straps (2 lengths) and strong magnet
• Combine components to meet most hanging
needs
See page 70 for compatibility chart
• Attaches to any Fluke test probe
• Bright white LED
• 120 hours of battery life
FOM Fiber Optic Meter
L205 Mini Hat Light
The Fluke Fiber Optic Meter (FOM) helps you
test and maintain fiber optic cable without
having to buy a whole new
meter. Plug the FOM
directly into any DMM with
a mV dc function and a 10
MΩ input impedance and
quickly and accurately verify fiber
optic cable system loss. Light sources and
patch cords sold separately.
Rugged high-intensity
Xenon worklight
• Attaches to a baseball
cap
• Includes a hat clip
• Includes two AAA batteries
• Waterproof
FOS 850 & FOS 850/1300
Fiber Optic Light Sources
L206 Deluxe LED Hat
Light (hard hat not
included)
A variety of light sources allow you to test
different cable lengths.
LockPak (LPAK)
The meter locking solution
• Kit includes a locking
accessory
• Attaches to back of a
187/189 meter or
724/725/789 to help
deter theft
• Accepts most common
locks (not included)
New
New
Attach it to a hard hat, a
baseball cap, or even a
panel door for all the light
you need.
• 3 super bright white LEDs
– never burn out
• Special hard-hat attachment
included
• 40-hour battery life
• Includes three AAA batteries
L210 Probe Light +
Probe Extender
Sofware FlukeView® Forms
FlukeView Forms increases the power of your
Fluke Digital Multimeter, Thermometer and
ProcessMeter by enabling you to document,
store and analyze individual readings or
series of measurements, then convert them
into professional-looking documents.
FlukeView Forms supports the following
meters:
• Fluke 180 Series Digital Multimeters (Model
FVF-SC2)
• Fluke 87-IV & 89-IV Digital Multimeters
(Model FVF-SC1)
• Fluke 53-II & 54-II Thermometers (Model
FVF-SC1)
• Fluke 45 Bench Meter (Model FVF-SC3)
• Fluke 789 ProcessMeter™ (Model FVF-SC2)
• Fluke 1653 (Model FVF-SC2 release 2.2 and
higher)
72
• Includes L200 Probe Light and
TP280 Test Probe Extenders
• 20 cm probe extenders keep hands away
from live circuits
• Extender fits between modular test probe
and test lead (total reach 30 cm)
New
LVD1 Volt Light
Dual sensitivity voltage detector
• Detects voltage from 40 V to 300 V
AC
• Blue light means you’re close
• Red light means you’re at the source
• Comes with a versatile clip to secure light to
pocket, hat or even panel door
All accessories have a one year warranty
Fuse and Warranty Information
Product Warranty
Each Fluke product is warranted to be free from defects in
material and workmanship under normal use and service,
for the warranty period listed unless local law requires a
longer period. The warranty period is listed in the
ordering information section of the product specification
and begins on the date of shipment. This warranty
extends only to the original buyer or end-user customer
of a Fluke authorized reseller, and does not apply to
fuses, disposable batteries or to any product which, in
Fluke’s opinion, has been misused, altered, neglected or
damaged by accident or abnormal conditions of operation
or handling. Fluke warrants that software will operate
substantially in accordance with its functional
specifications for 90 days and that it has been properly
recorded on non-defective media. Fluke does not warrant
that software will be error free or operate without
interruption.
Lifetime Warranty
Fuse Replacement Information
A
V
125mA
440mA
500mA
630mA
1A
1.25A
3A
3.15A
11A
250V
1000V
250V
250V
600V
500V
600V
500V
1000V
11A
15A
20A
1000V
600V
600V
IR
Size
in mm
5x20
10.3x34.9
5x20
5x20
10.3x34.9
6.35x32
10.3x38.1
6.35x32
Part nr
qty 1
4822 070 31251
10kA
943121
1500A
838151
1500A
740670
10kA
830828
2030852
10kA
475004
2040349
17kA
Replaced by 11A, 1000V,
20kA fuse; 803293
20kA
10.3x38.1
803293
100kA
10.3x38.1
820829
Replaced by 15A, 600V, 100kA fuse; part nr. 820829
See the back of your Fluke test tool or user manual for the fuses installed.
For manuals check the Fluke website in the product section.
For Fuse Replacement Guide check the Fluke website in the service section.
www.tti.co.uk
Tel: 01480 412451
Each Fluke 20, 70, 80, 170 and 180 Series DMM
purchased after October 1, 1996 will be free from defects
in material and workmanship for its lifetime. This
warranty does not cover fuses, disposable batteries and
damage from accident, neglect, contamination, misuse or
abnormal conditions of operation or handling, including
overvoltage failures caused by use outside the DMM’s
specified rating, or normal wear and tear of mechanical
components. This warranty covers the original purchaser
only and is not transferable. For ten years from the date
of purchase, this warranty also covers the LCD.
Thereafter, for the lifetime of the DMM, Fluke will replace
the LCD for a fee based on then current component
acquisition costs.
To establish original ownership and prove date of
purchase, please complete and return the registration
card accompanying the product.
Service
Fluke will, at its option, repair at no charge, replace or
refund the purchase price of a defective product
purchased through a Fluke authorized sales outlet and
at the applicable international price. Fluke reserves the
right to charge for importation costs of repair/replacement
parts if product purchased in one country is sent for
repair elsewhere.
Send defective product with a description of the problem
to the nearest Fluke Authorized Service Center, postage
and insurance prepaid. Fluke will pay return transportation
for product repaired or replaced in-warranty. Before
making any non-warranty repair, Fluke will estimate cost
and obtain authorization, then invoice you for repair and
return transportation.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS
OF DATA, ARISING FROM ANY CAUSE OR THEORY.
AUTHORIZED RESELLERS ARE NOT AUTHORIZED TO
EXTEND ANY DIFFERENT WARRANTY ON FLUKE’S BEHALF.
Since some states do not allow the exclusion or limitation
of an implied warranty or of incidental or consequential
damages, this limitation of liability may not apply to you.
73
®
®
®
Test Tools Catalog
Digital Multimeters
Electrical Testers
Clamp Meters
Installation Testers
Power Quality Tools
ScopeMeter® Test Tools
Digital Thermometers
Field Calibrators
Fluke Corporation
P.O. Box 9090
Everett, WA USA 98206
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Available from:
Measurably better value
Thurlby Thandar Instruments Ltd. Glebe Road, Huntingdon, Cambs. PE29 7DR U.K.
Tel: 01480 412451, Fax: 01480 450409, e-mail: [email protected]
Web: www.tti-test.com or www.tti.co.uk
For more information call:
In the U.S.A. (800) 443-5853
or Fax (425) 446 -5116
In Europe/M-East/Africa +31 (0)40 2 675 200
or Fax +31 (0)40 2 675 222
In Canada (905) 890-7600
or Fax (905) 890-6866
From other countries +1 (425) 446 -5500
or Fax +1 (425) 446 –5116
Visit us on the world wide web at:
http://www.fluke.com
Fluke (UK) Ltd.
52 Hurricane Way
Norwich
Norfolk
NR6 6JB
United Kingdom
Tel.: 0207 942 0700
Fax: 0207 942 0701
E-mail: [email protected]
Visit us on the world wide web at:
http://www.fluke.co.uk
© Copyright 2005, Fluke Corporation.
All rights reserved.
Printed in the Netherlands 12/04
Data subject to alteration without notice.
Pub_ID: 10827-eng
Rev. 01
Test Tools Catalog 2005
Fluke. Keeping your world
up and running.
Accessories
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement