WG-604 COVER - Winther Wireless Distribution

WG-604 COVER - Winther Wireless Distribution
WG-604/WG-604P
Easy HotSpot Kit
User’s Manual
Handlink Technologies Inc.
Copyright Notice
Copyright © 2005-2015 Handlink Technologies Inc. All rights reserved. No part of this document may
be copied, reproduced, or transmitted by any means, for any purpose without prior written permission.
Protected by TW patent 223184, JPN patent 3099924 and China patent ZL 03 2 04640.5.
Disclaimer
We shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from furnishing this material, or the performance or use of this
product. We reserve the right to change the product specification without notice. Information in this
document may change without notice.
Trademarks
Microsoft Win98, Windows 2000 , WinXP, Win Vista and Win7 are registered trademarks of Microsoft
Corporation.
General: All other brand and product names mentioned herein may be registered trademarks of their
respective owners. Customers should ensure that their use of this product does not infringe upon any
patent rights. Trademarks mentioned in this publication are used for identification purposes only and
are properties of their respective companies.
Table of Contents
1
Introduction ----------------------------------------------------------------------------------------------------------------- 5
1-1 Package Contents -------------------------------------------------------------------------------------------------------- 5
1-2 Features --------------------------------------------------------------------------------------------------------------------- 6
1-3 Precautions ----------------------------------------------------------------------------------------------------------------- 6
1-4 Outlook----------------------------------------------------------------------------------------------------------------------- 6
1-4-1
Top Panel --------------------------------------------------------------------------------------------------------- 7
1-4-2
Rear Panel-------------------------------------------------------------------------------------------------------- 7
1-5 Technical Specifications ------------------------------------------------------------------------------------------------ 8
2
1-5-1
Hardware Specifications -------------------------------------------------------------------------------------- 8
1-5-2
Software Specifications --------------------------------------------------------------------------------------10
Installation -----------------------------------------------------------------------------------------------------------------12
2-1 Connecting the Antennas ----------------------------------------------------------------------------------------------13
2-2 Installation Requirements----------------------------------------------------------------------------------------------13
2-3 Getting Start ---------------------------------------------------------------------------------------------------------------15
3 Configuring the Wireless Subscriber Gateway -----------------------------------------------------------------------16
3-1 Setting Wizard ------------------------------------------------------------------------------------------------------------16
3-2 Advanced Setup----------------------------------------------------------------------------------------------------------39
3-2-1
3-2-2-1
Authentication ------------------------------------------------------------------------------------ 40
3-2-2-2
RADIUS-------------------------------------------------------------------------------------------- 43
3-2-2
BILLING ----------------------------------------------------------------------------------------------------------46
3-2-2-1
Billing ----------------------------------------------------------------------------------------------- 46
3-2-2-2
Accounting ---------------------------------------------------------------------------------------- 52
3-2-2-3
Credit Card---------------------------------------------------------------------------------------- 65
3-2-3
2
AUTHENTICATION -------------------------------------------------------------------------------------------40
MANAGEMENT ------------------------------------------------------------------------------------------------75
3-2-3-1
LAN Devices-------------------------------------------------------------------------------------- 75
3-2-3-2
Syslog ---------------------------------------------------------------------------------------------- 77
3-2-3-3
Session Trace ------------------------------------------------------------------------------------ 84
3-2-3-4
Bandwidth ----------------------------------------------------------------------------------------- 86
Easy Hotspot Kit
3-2-3-5
3-2-4
SNMP ---------------------------------------------------------------------------------------------- 87
SECURITY ------------------------------------------------------------------------------------------------------88
3-2-4-1
Pass Through ------------------------------------------------------------------------------------ 88
3-2-4-2
Filtering -------------------------------------------------------------------------------------------- 90
3-2-4-3
Share ----------------------------------------------------------------------------------------------- 92
3-2-4-4
Secure Remote ---------------------------------------------------------------------------------- 94
3-2-5
SYSTEM ---------------------------------------------------------------------------------------------------------95
3-2-4-1
System --------------------------------------------------------------------------------------------- 95
3-2-4-2
WAN/LAN ----------------------------------------------------------------------------------------- 98
3-2-4-3
Server -------------------------------------------------------------------------------------------- 105
3-2-4-4
Keypad ------------------------------------------------------------------------------------------- 108
3-2-4-5
Customization ---------------------------------------------------------------------------------- 116
3-2-4-6
Portal Page ------------------------------------------------------------------------------------- 138
3-2-4-7
Advertisement ---------------------------------------------------------------------------------- 139
3-2-4-8
Walled Garden --------------------------------------------------------------------------------- 140
3-2-4-9
DDNS--------------------------------------------------------------------------------------------- 142
3-2-4-10
Wireless------------------------------------------------------------------------------------------ 145
3-2-4-11
Account Generator---------------------------------------------------------------------------- 149
3-3 System Status ---------------------------------------------------------------------------------------------------------- 151
3-4-1
System---------------------------------------------------------------------------------------------------------- 152
3-4-2
Account List --------------------------------------------------------------------------------------------------- 154
3-4-3
Account Log --------------------------------------------------------------------------------------------------- 155
3-4-4
Current User -------------------------------------------------------------------------------------------------- 156
3-4-5
DHCP Clients ------------------------------------------------------------------------------------------------- 157
3-4-6
Session List --------------------------------------------------------------------------------------------------- 157
3-4-7
LAN Devices -------------------------------------------------------------------------------------------------- 158
3-4 System Tools------------------------------------------------------------------------------------------------------------ 158
3-4-1
Configuration-------------------------------------------------------------------------------------------------- 159
3-4-2
Firmware Upgrade------------------------------------------------------------------------------------------- 160
Easy Hotspot Kit
3
3-4-3
Boot Code ----------------------------------------------------------------------------------------------------- 162
3-4-4
System Account ---------------------------------------------------------------------------------------------- 162
3-4-5
SSL Certificate------------------------------------------------------------------------------------------------ 167
3-4-6
Pin Command------------------------------------------------------------------------------------------------- 168
3-4-7
Restart ---------------------------------------------------------------------------------------------------------- 169
3-4-8
Logout ---------------------------------------------------------------------------------------------------------- 169
Appendix A Signal Connection Arrangements ------------------------------------------------------------------------ 170
Appendix B Regulations/EMI Compliance ----------------------------------------------------------------------------- 171
LIMITED WARRANTY------------------------------------------------------------------------------------------------------- 172
4
Easy Hotspot Kit
1
Introduction
The Wireless Subscriber Gateway is a compact intelligent gateway integrated with a four-port
port-based VLAN switch. It provides Plug’ Play Internet access, advanced security and network
management.
The Wireless Subscriber Gateway is designed for service providers, system integrator or hotspot venue
operator without backend-RADIUS-Server to have integrated solution for rapid deployment, which can
start hotspot service quickly and easily and enhance service performance.
The Wireless Subscriber Gateway is an ideal solution for hotel lobbies, coffee bars, airport lounges,
conference facilities and other sites that commonly host business travelers, and offers instant
high-speed Internet connections. With its IP Plug and Play technology, it accepts any client
configuration login, when client open browser the Wireless Subscriber Gateway immediately
recognizes new end-user and redirects their browser to customized Web pages. There’s no need for
end-user to change any of their default network (Static IP), e-mail (SMTP Server behind firewall), or
browser settings (HTTP Proxy) or load any special software to access hotspot service. It’s completely
Plug’ Play with any browser.
1-1 Package Contents
Please inspect your package. The following items should be included:
◎ WG-604
z One Wireless Subscriber Gateway
z Three antennas
z One AC Power Adapter for Wireless Subscriber Gateway
z One CD containing User’s Manual and MIB file
z Two screws for wall-mount
z One UTP Ethernet/Fast Ethernet cable (Cat.5 Twisted-pair)
Optional Product:
◎ AG-300E Account Generator Printer
z One AC Power Adapter for mini account generator printer
z One UTP Ethernet/Fast Ethernet cable (Cat.5 Twisted-pair)
z One Account Generator Printer User’s Guide
If any of the above items are damaged or missing, please contact your dealer immediately.
Easy Hotspot Kit
5
1-2 Features
z Wireless data rates up to 54Mbps
z Supports 100 Simultaneous Users
z IP Plug and Play (iPnP)
z Comprehensive security
64/128-bit WEP encryption
WPA encryption
WPA2 Encryption
IP/URL filtering
z Intelligent Management
z Built-in AAA (Authentication/Accounting/Authorization) and Billing mechanism
Note: The "PnP" Function only can be used with TCP/IP-based Network.
1-3 Precautions
z Never remove or open the cover. You may suffer serious injury if you touch these parts.
z Never install the system in the wet locations.
z Use only the original fitting AC power adapter otherwise there is a danger of severe electrical shock.
z Avoid exposing the Wireless Subscriber Gateway to direct sunlight or another heat source.
z Choose a well-ventilated area to position your Wireless Subscriber Gateway.
1-4
Outlook
Figure 1 Wireless Subscriber Gateway Outlook
6
Easy Hotspot Kit
1-4-1
Top Panel
The top panel of the Wireless Subscriber Gateway is shown below.
Figure 2 Wireless Subscriber Gateway Top Panel
LEDs Indication
LED
State
PWR
Off
Description
The Wireless Subscriber Gateway is not receiving electrical
power.
SYS
Green
The Wireless Subscriber Gateway is receiving electrical power.
Off
The Wireless Subscriber Gateway status is defective.
Green
The Wireless Subscriber Gateway status is complete.
Green (Blinking) During firmware upgrades, this system LED will blink.
WAN
Off
Port has not established any network connection.
Green
A port has established a valid 10/100Mbps network connection.
Green (Blinking) 10/100Mbps traffic is traversing the port.
LAN-1~
Off
Port has not established any network connection.
LAN-4
Green
A port has established a valid 10/100Mbps network connection.
Green (Blinking) 10/100Mbps traffic is traversing the port.
WLAN
Off
The Wireless is not ready.
Green
The Wireless Subscriber Gateway has established a valid
wireless connection.
Green (Blinking) The Wireless connection is active.
1-4-2
Rear Panel
The rear panel of the Wireless Subscriber Gateway is shown below.
Figure 3 Wireless Subscriber Gateway Rear Panel
Easy Hotspot Kit
7
1. LAN (1-4):
The rear panel supports four auto-sensing RJ-45 ports and all ports can be auto-switched to MDI-II
connections. The LAN ports used for linking hosts or other network devices. The individual port can be
either connected to 100BaseTX networks or 10BaseT networks. When connecting to a 100BaseTX
network, the ports operate at 100Mbps in half-duplex mode or 200Mbps in full-duplex mode. When
connecting to a 10BaseT network, the ports operate at 10Mbps in half-duplex mode or 20Mbps in
full-duplex mode.
2. WAN: One Ethernet port used for linking xDSL or Cable Modem.
3. Reset Button:
The Wireless Subscriber Gateway has a reset button at the rear panel of the device. Use this function
to reset the system back to factory defaults.
4. Power Jack: Used to connect the external power supply with the Wireless Subscriber Gateway.
1-5 Technical Specifications
1-5-1
Hardware Specifications
Network Specification
IEEE802.3 10BaseT Ethernet
IEEE802.3u 100BaseTX Fast Ethernet
IEEE802.11g Wireless LAN
ANSI/IEEE 802.3 NWay auto-negotiation
Wi-Fi Compatible
Connectors
Four LAN Ports (10BaseT/100BaseTX Auto cross-over)
One WAN Port (10BaseT/100BaseTX Auto cross-over)
Encryption
WEP (Wired Equivalent Privacy) 64/128-bit RC4
WPA (Wi-Fi Protected Access)
WPA2 (Wi-Fi Protected Access)
External Antenna Type
2dBi (Max) Dual detachable diversity antenna with reverse SMA
8
Easy Hotspot Kit
LED Indicators
One POWER LED
One WAN 10/100M Link/Activity LED
Four LAN 10M/100M Link/Activity LEDs
One Wireless Link/Activity LED
One System LED
Power Requirement
External Power Adapter
Input: 100-240 VAC, 50/60 Hz
Output: 12V, 1.5A
Environment Conditions
Operating Temperature: 0 to 50°C
Storage Temperature: -10 to 60°C
Operating Humidity: 10~80% non-condensing
Storage Humidity: 10% to 90% non-condensing
Certifications
FCC part 15 Class B, CE , C-Tick , VCCI
Dimension
Size: 223 (L) x 143
(W) x 36
(H) mm
Weight: About 500g (Net)
Mounting
Desktop, Wall mounted
Easy Hotspot Kit
9
1-5-2
Software Specifications
Networking
•
IEEE802.3 10BaseT Ethernet
•
IEEE802.3u 100BaseTX Fast Ethernet
•
IEEE802.11b Wireless LAN
•
IEEE802.11g Wireless LAN
•
IEEE802.11n Wireless LAN
•
Supports update to 200 Simultaneous Users
•
IP Plug and Play (iPnP)
•
HTTP Proxy Support
•
SMTP Server Redirection
•
DHCP Server
•
DHCP Relay
•
Static IP WAN Client
•
DHCP WAN Client
•
PPPoE WAN Client
•
PPTP WAN Client
•
NAT
•
NTP (Network Time Protocol) Support
•
DDNS
Marketing Cooperation
•
Advertisement URL link
•
Walled garden
•
Customizable log-on and log-off pages
•
Portal Page
•
WISPr Smart Client
User Accounting and Authentication
•
Built-in Authentication
•
Web-based Authentication
•
RADIUS AAA Support (RFC 2865, 2866)
•
Secondary RADIUS
•
User Authentication and Accounting
•
Logout Window Timer Control
10
Easy Hotspot Kit
Security and Firewall
•
Layer 2 Isolation Security
•
SSL User Login page/ Configuration Page
•
SSL Administration
•
VPN Pass through (IPSec/PPTP)
•
Customize SSL Certificate
•
Pass Through IP/MAC/URL Address
•
Restricted Destination Filtering IP/URL
•
VPN (IPSec/PPTP) Pass through
•
PPTP VPN Client
•
WEP
•
WPA
•
WPA2
•
WPA/WPA2 Mix mode
Management
•
Web-based Management Tool
•
Firmware Upgrade via HTTP/TFTP
•
Wizard setup for step-by-step Configuration
•
Backup/Restore/Factory Default Setting
•
Remote Authorized Management
•
Real-time Session List
•
LAN Device Management
•
Syslog (System/Subscriber/LAN device)
•
E-mail logs
•
SNMP v1/v2 (MIB II, Private MIB)
•
System Information Table
•
Status Report (Daily/Monthly/System/Network)
•
SSL certificate upload
Extra Function with optional AG-300E
•
Local Authentication
•
Local Accounting
•
Local Billing
AG-300E Account Generator (Thermal Printer)
•
Interface: Ethernet
•
Print Width: 48mm (Paper width: 58mm)
•
Paper Length: 50 M
Easy Hotspot Kit
11
2
Installation
The followings are instructions for setting up the Wireless Subscriber Gateway. Refer to the illustration
and follow the simple steps below to quickly install your Wireless Subscriber Gateway.
Wall-Mounting
The Wireless Subscriber Gateway can be wall-mounted on a wall by applying the two mounting
brackets on screws.
Figure 4 Wall-Mounting Bracket - Bottom of Wireless Subscriber Gateway
Please refer to the following instructions for mounting a Wireless Subscriber Gateway on a wall or other
surface.
1. Install two screws on a wall according to the relative positions shown below.
Figure 5
2. Hang Wireless Subscriber Gateway on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the Wireless
Subscriber Gateway rear panel connectors could pull out the Wireless Subscriber Gateway from
the wall.
12
Easy Hotspot Kit
2-1 Connecting the Antennas
The Wireless Subscriber Gateway provides two antenna connectors on the rear of the unit.
Figure 6 Antenna Connectors
2-2 Installation Requirements
Before installing the Wireless Subscriber Gateway, make sure your network meets the following
requirements.
System Requirements
The Wireless Subscriber Gateway requires one of the following types of software:
z Windows 98 Second Edition/NT/2000/XP/Vista
z Red Hat Linux 7.3 or later version
z MAC OS X 10.2.4 or later version
z Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol installed)
z Standard phone line for xDSL modem Or Coaxial cable for Cable modem
z Web Browser Software (Microsoft I.E 5.0 or later version or Netscape Navigator 5.0 or later
version)
z One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card
z UTP network Cable with a RJ-45 connection (Package contents)
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all connections. Make sure
each cable not exceed 328 feet (Approximately 100 meters).
Easy Hotspot Kit
13
ISP Requirements
Verify whether your ISP use fixed or dynamic IP. If it is a fixed IP, be sure to get the IP from your ISP.
For dynamic IP, which is mostly used, the PC will get the IP automatically whenever it hooks up on the
modem.
Dynamic IP
z
Dynamic IP Setting
Fixed IP
z
Your fixed IP address for the Wireless Subscriber Gateway
z
Your subnet mask for the Wireless Subscriber Gateway
z
Your default gateway IP address
z
Your DNS IP address
PPPoE
z
Your user name from your ISP
z
Your password from your ISP
PPTP
z
PPTP Server IP Address from your ISP
z
PPTP Local IP address from your ISP.
z
PPTP Local IP subnet mask from your ISP.
z
Your user name from your ISP
z
Your password from your ISP
z
Your PC Requirements
The Static IP settings for the PC
z
Your PC’s fixed IP address
z
Your PC’s subnet mask
z
Your PC’s default gateway IP address
z
Your PC’s primary DNS IP address
Note:
1. The gateway’s default IP address setting is “10.59.1.1”.
2. The gateway’s default subnet mask setting is “255.0.0.0”.
The Dynamic IP settings for the PC
We recommend that you leave your IP settings as automatically assigned. By default, the Wireless
Subscriber Gateway is a DHCP server, and it will give your PC the necessary IP settings.
14
Easy Hotspot Kit
2-3 Getting Start
1. Place the Wireless Subscriber Gateway and AG-300E Printer on a flat work surface.
2. Connect the Ethernet cable to the Wireless Subscriber Gateway’s LAN port.
3. Connect the other end of the Ethernet cable to the AG-300E Account Generator Printer’s RJ45 port.
4. Ensure that your modem and computer are both switched on.
5. Use the supplied cable to connect the Wireless Subscriber Gateway's WAN port to the modem.
Check that the Cable/xDSL Status LED lights.
6. Connect your computer to one of the 10/100 LAN ports on the Wireless Subscriber Gateway. Check
that the LAN Port Status LED lights.
7. Configure the further parameters via a Web browser.
Figure 7 Wireless Subscriber Gateway Connection
Easy Hotspot Kit
15
3 Configuring the Wireless Subscriber Gateway
3-1 Setting Wizard
Step 1: Start your browser, and then enter the factory default IP address 10.59.1.1 in your browser’s
location box. Press Enter.
Figure 8 Web Browser Location Field (Factory Default)
Step 2: The Wireless Subscriber Gateway configuration tools menu will appear. In the Username and
Password field, type the factory default user name admin and password admin and click
Login. If you are first time setting the system, the wizard setup screen will appear. You will be
guided, step-by-step, through a basic setup procedure.
Username: admin
Password: admin
Figure 9 Configuration Tools Menu
Figure 10 Wizard Setup Screen
16
Easy Hotspot Kit
Figure 11 System Quick View
Click on reset button to clear the username and password data.
Note:
) This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers.
) If you would like to change the password please see Step 10.
) Username and Password can consist of up to 20 alphanumeric characters and are case sensitive.
) If for some reason your password is lost or you cannot gain access to the Wireless Subscriber
Gateway Configuration Program, please press the reset button to load the device to manufacturer
defaults.
) If the Wireless Subscriber Gateway doesn’t send packet in 5 minutes (default), the Wireless
Subscriber Gateway wills logout automatically.
) Proxy needs to set disable first when administrator accesses admin UI.
Easy Hotspot Kit
17
Step 3: Internet Connection Setting
Select the appropriate Internet connection type to connect to your ISP.
Figure 12 Internet Connection Setting Screen
z
DHCP Client
The device can work as a DHCP client. This allows the device to obtain the IP address and other
TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP
Client.
Figure 13 Internet Connection Setting Screen—DHCP Client Setti
18
Easy Hotspot Kit
z
Static IP Setting
If Static IP Setting is selected, then this screen will appear. Enter the IP address information provided
by your ISP.
Figure 14 Internet Connection Setting Screen—Static IP Setting
Item
Default
Description
IP Address
0.0.0.0
Enter the IP address provided by your ISP.
Subnet Mask
0.0.0.0
Enter the subnet mask for the IP address.
Gateway IP
0.0.0.0
Enter the Gateway IP Address provided by your ISP.
Empty
Enter the primary DNS server IP address for the xDSL/Cable
Empty
Enter the secondary DNS server IP address for the xDSL/Cable
Address
Primary DNS
Server
Secondary
DNS Server
connection (provided by your ISP).
connection (provided by your ISP). If the primary DNS Server IP were
not available, meanwhile, Secondary DNS Server IP would start in the
same time.
Easy Hotspot Kit
19
z
PPPoE (Point-to-Point Protocol over Ethernet)
If “PPPoE” is selected, then this screen will appear. Enter the username, password and other major
fields.
Figure 15 Internet Connection Setting Screen—PPPoE Setting
Item
Default
Username
Empty
Password
Empty
PPP MTU Setting
1492
TCP MSS Setting
1452
Service Name
Empty
20
Description
Enter the user name provided by your ISP. The user name can consist
of up to 80 alphanumeric characters and is case sensitive.
Enter the user password provided by your ISP. The password can
consist of up to 80 alphanumeric characters and is case sensitive.
MTU (Maximum Transfer Unit) specifies maximum transmission unit
size.
MSS (Maximum Segment Size) specifies maximum segment size.
Enter the service name provided by your ISP. The service name can
consist of up to 64 alphanumeric characters and is case sensitive.
Easy Hotspot Kit
Item
Default
Description
Connect on Demand and Max Idle Time
Connect on
Demand
Enable
You can configure your Wireless Subscriber Gateway to cut your
connection with your ISP after a specified period of time (Max Idle
Time). If you have been disconnected due to inactivity, Connect on
Demand enables your Wireless Subscriber Gateway to automatically
Max Idle Time
10
Minutes
re-establish your connection as soon as you attempt to access the
Internet again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain, click the
radio button of keep alive. The Max Idle Time maximum value is 65535
minutes.
Keep alive and Redial Period
Keep alive
Disable
This option keeps your PPPoE enabled Internet access connected
Redial Period
30
indefinitely, even when it sits idle. The Redial Period maximum value is
Seconds 65535 seconds.
Easy Hotspot Kit
21
z
PPTP Client (Point-to-Point Tunneling Protocol)
If “PPTP” is selected, then this screen will appear. Fill out all the information provided by your ISP.
Figure 16 Internet Connection Setting Screen—PPTP Client Setting
Item
Default
My IP Address
Empty
My Subnet Mask
Empty
22
Description
Enter the PPTP local IP address provided by your ISP.
Enter the PPTP local Subnet Mask IP address for the IP
address (My IP Address).
Easy Hotspot Kit
Item
Gateway IP Address
Default
Empty
PPTP Server IP Address Empty
Description
Enter the PPTP server Gateway IP address provided by your
ISP.
Enter the PPTP server IP address provided by your ISP.
Enter the user name provided by your ISP. The user name
Username
Empty
can consist of up to 80 alphanumeric characters and is case
sensitive.
Password
Empty
Enter the user password provided by your ISP. The password
can consist of up to 80 alphanumeric characters and is case
sensitive.
PPP MTU Setting
1460
TCP MSS Setting
1400
MTU
(Maximum
Transfer
Unit)
specifies
maximum
transmission unit size.
MSS (Maximum Segment Size) specifies maximum segment
size.
Enter the connection ID or connection name. The connection
Connection ID/Name
Empty
ID/Name can consist of up to 81 alphanumeric characters
and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand
Enable
You can configure your Wireless Subscriber Gateway to cut
your connection with your ISP after a specified period of time
(Max Idle Time). If you have been disconnected due to
inactivity, Connect on Demand enables your Wireless
Subscriber Gateway to automatically re-establish your
Max Idle Time
10 Minutes connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain,
click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Keep alive and Redial Period
This option keeps your PPTP enabled Internet access
Keep alive
Disable
connected indefinitely, even when it sits idle. The Redial
Period maximum value is 65535 seconds.
Easy Hotspot Kit
23
Step 4: Wireless Setting
This page allows you to define ESSID, Channel ID and WEP/WPA encryption for wireless connection.
Figure 17 Wireless Setting Screen
Item
Default
Wireless Connection Enable
ESSID
Description
Enable or Disable Wireless connection
Wireless The ESSID is the unique name that is shared among all points in a
wireless network. It is case sensitive and must not exceed 32
characters.
Channel
24
6
Enter the channel ID for wireless connection.
Easy Hotspot Kit
Step 5: E-mail Server Setting
Wireless Subscriber Gateway allows an extra Email server parameter to forward the subscriber’s
E-mail.
Figure 18 E-mail Service Setting Screen
Item
Default
Description
Email Server Redirect
No
Disables or enables email server redirect function. To
prevent some subscriber’s original Email server may protect
by firewall or NAT network. Wireless Subscriber Gateway
provides an extra Email server parameter to forward the
subscriber’s Email. The Wireless Subscriber Gateway not
only forwards the subscribers’ E-mail via other E-mail server
but also changes the SMTP header. The recipient of your
E-mail sees the message as if you sent it from your local
Internet Service Provide, not form the hotel or other place.
Email Server’s IP
Empty
address or Domain name
Before setting this field, please make sure the E-mail sever
relay function is opened. Enter the email server IP address
or domain name. The field must not exceed 50 characters.
SMTP Port
25
Enter the SMTP port. The SMTP port allowed range is 25 or
2500 to 2599.
Easy Hotspot Kit
25
Step 6: Authentication Service Setting
Figure 19 Authentication Service Setting Screen
Item
Default
Description
Built-in Authentication/
No
Yes―
No Authentication
No Authentication)
Wireless Subscriber Gateway provides Built-in
Authentication for service provider to build up an
Internet service without any extra authentication
software. If Yes is selected, service provider can
generate the subscriber account inside Wireless
Subscriber
Gateway,
and
the
system
will
authenticate the subscriber login according to the
generated account.
No―
Subscriber can direct access the Internet without
enter username and password.
26
Easy Hotspot Kit
Step 7: Billing Profile Setting
The function is used to setup a billing profile. A billing profile is a description of how you want to charge
your customer.
Figure 20 Billing Profile Setting Screen
Item
Default
Description
Service
Time to Finish Options: Time to Finish or Accumulation.
Time to Finish―
The subscriber can access Internet only one time with one account.
Once subscriber login, the pre-defined usage time will start until run
out even the subscriber stop to access the Internet before run out.
Accumulation―
The subscriber can access Internet many times with one account.
The system can keep and accumulate every single usage time until
the pre-defined usage time run out.
Easy Hotspot Kit
27
Item
Default
Description
Currency
$
Enter the appropriate currency unit or currency symbol.
Number of
2
Enter the billing decimal value. The field maximum value is 3.
01~03
The index number of billing profile. In Wizard setup, we provide only
decimals
places
No
3 billing profile.
Name
30 minutes/
1 hour/
It is the name of billing profile. The maximum allowed characters
length is 12.
2 hours
Usage Time
30 minutes/
1 hour/
The duration of the billing period. When this period expires, user
account will be discontinued.
2 hours
Charge
1.00/2.00/3.00 Enter the amount of Internet service. The amount maximum value is
999999.
Step 8 Account Generator Printer Setting
There are two different choices, one is exclusive printer (Account Generator Printer), and the other is
non-exclusive printer. Exclusive printer is a portable thermal printer that is integrated with Wireless
Subscriber Gateway to press one button to generate accounts and receipt immediately without PC
operating. Non-exclusive printer can use the PC Web-based browser to print out user account.
Figure 21 Printer Setting Screen
28
Easy Hotspot Kit
Button B
Button
Button C
Figure 22 Account Generator Printer
Step 9: Accounting Setting
z
Three-buttons Printer Setting
Figure 23 Accounting Setting Screen (Three Button Printer)
Easy Hotspot Kit
29
Figure 24 Billing Profile Setting Screen
Item
Button A~ C
Default
01
Description
Define each button’s billing profile. Select
one billing profile by clicking in the list box.
Printout
Number of copies to print
1
The system allows you to print all your bills.
This value is number of copies.
This function allows you to produce custom bill based on your
requirements.
Click “I want to setup the web-based accounting now if exclusive printer cannot work” to open the
“Web-based Account Generator Setting” screen to start the web-based accounting function.
30
Easy Hotspot Kit
z
Web-based Account Generator Setting
Figure 25 Web-based Account Generator Setting Screen
Item
Default
Description
Billing Profile (Button
Define each button’s billing profile. Select one billing profile by clicking
A~C)
in the list box.
Printout
Number of copies to
1
print
The system allows you to print all your bills. Select one
number of copies by clicking in the list box.
-
This function allows you to produce custom bill based on
your requirements.
Web-based Account
Username
account
Enter the user name for web-based account generator.
The user name can consist of up to 80 alphanumeric
characters and is case sensitive.
Item
Default
Description
Password
account
Enter the password for web-based account generator. The
password can consist of up to 80 alphanumeric characters
and is case sensitive.
Confirm
Easy Hotspot Kit
Empty
Enter the password for confirmation.
31
Click on button to preview and operate account generator panel.
Button
Button B
Button C
Figure 26 Account Generator Panel
Click on button to create a new account.
32
Easy Hotspot Kit
Click “View Account List” to display current account information.
Figure 27 Account List
Click on refresh button to update the account list page
The field name button in this list show that this list can be sorted in ascending/descending order
according to the corresponding field name.
Select the check boxes and click ‘Delete’ to delete accounts.
Delete all accounts in account list.
Note: This page will refresh automatically every 5 minutes.
Easy Hotspot Kit
33
Customize Printout Text
This function allows you to produce custom bill based on your requirements.
Figure 28 Customize Printout Text Setting Screen
Click the button to displays the account on the screen as it would appear when printed.
34
Easy Hotspot Kit
Figure 29 Example- PC-connected printer Printout (Time to Finish)
Figure 30 Example- PC-connected printer Printout (Accumulation)
Easy Hotspot Kit
35
Figure 31 Example- Account Generator Printer Printout (Time to Finish)
Figure 32 Example- Account Generator Printer Printout (Accumulation)
36
Easy Hotspot Kit
Figure 33 Example-Post-paid Printout
Easy Hotspot Kit
37
Step 10: System Setting
Figure 34 System Setting Screen
Item
Default
Description
Username
admin
Enter the user name. The user name can consist of up to
Password
admin
Enter the user password. The password can consist of up
Confirm
Empty
Enter the password of administrator for confirmation.
System date and time
YYYY/MM/DD
80alphanumeric characters and is case sensitive.
to 80 alphanumeric characters and is case sensitive.
HH:MM:SS
Click Get from my Computer button to correct the system
date and time.
Secure Administrator IP All
This function allows remote user to management the
Address
device. You can specify one or any IP addresses for
remote control the system.
Click the button to save the settings then the system will restart.
38
Easy Hotspot Kit
3-2 Advanced Setup
The Advanced Setting enables you to configure advanced settings related to accessing the Internet,
including,
1.
2.
3.
4.
5.
AUTHENTICATION
†
AUTHENTICATION
†
RADIUS
BILLING
†
BILLING
†
ACCOUNTING
†
CREADIT CARD
MANAGEMENT
†
LAN DEVICES
†
SYSLOG
†
SESSION TRACE
†
BANDWIDTH
†
SNMP
SECURITY
†
PASS THROUGHT
†
FILTERING
†
SHARE
†
SECURE REMOTE
SYSTEM
†
SYSTEM
†
WAN/LAN
†
SERVER
†
KEYPAD
†
CUSTOMIZATION
†
PORTAL PAGE
†
ADVERTISEMENT
†
WALLED GARDEN
†
DDNS
†
WIRELESS
†
ACCOUNT GENERATOR
Figure 35 Advanced Setting Item Screen
Note: After change the settings of device, please click apply button to save the new settings.
Easy Hotspot Kit
39
3-2-1
3-2-2-1
AUTHENTICATION
Authentication
Figure 36 Authentication Setting Screen
Item
Authentication Type
Default
Description
No
Option: No Authentication, Built-in Authentication or User
Authentication
Agreement.
No Authentication―
Subscriber can direct access the Internet without enter
username and password.
Built-in Authentication―
Wireless
Subscriber
Gateway
provides
“Built-in
Authentication” for service provider to build up an Internet
service without any extra authentication software. If
“Built-in Authentication” is selected, service provider can
generate
the
subscriber
account
inside
Wireless
Subscriber Gateway, and the system will authenticate the
subscriber login according to the generated account.
User Agreement―
Subscriber must accept the service usage agreement
before they can access the Internet.
40
Easy Hotspot Kit
Item
Current User
Default
1 Min(s)
Information Backup
Description
The system provides automatically backup account
information and unused account to flash ROM. This
function allow administrator to adjust the backup time.
The default value is 1 minute. The Current User
Information Backup valid range is 1 to 1440.
Redirect Login Page
URL
Code
Empty
The input format can be http://www.yahoo.com. The
maximum character of the URL Link is 200.
Copy and paste the following HTML Code into your home page to produce
redirect subscriber login page.
Easy Hotspot Kit
41
Copy and paste the following HTML Code into your home page to produce user agreement login page.
Figure 37 Preview Redirect Login Page Code
Item
Default
Description
SSL Login Page
Disable
Enables or disables SSL security of login page.
User Idle Time Out
5 Minutes
The user idle time out valid range is 1-1440.
Click Apply button to save the new settings.
42
Easy Hotspot Kit
3-2-2-2
RADIUS
Figure 38 Authentication Setting Screen
Easy Hotspot Kit
43
Item
Default
RADIUS Authentication Disable
Description
Option: No Authentication or RADIUS Server.
Disable (No Authentication) ―
Subscriber can direct access the Internet without enter
username and password.
Enable (RADIUS Authentication) ―
Wireless Subscriber Gateway provides “RADIUS
Authentication” for service provider to build up an Internet
service with RADIUS server. If RADIUS Authentication is
enabled, all subscribers’ authentication will send to RADIUS
Server by RADIUS protocol (RFC 2865, 2866).
Time to Finish/
Enable
Accumulation
Service provider provides two different accounting calculate
for the Internet service.
Primary RADIUS Server
Server IP
Empty
Enter the IP address of RADIUS server.
Authentication Port
1812
Enter the authentication port number; the authentication port
number must match with the RADIUS server setting. The
allowed numbers are from 0 to 65535.
Accounting Port
1813
Enter the accounting port number; the accounting port number
must match with the RADIUS server setting. The allowed
numbers are from 0 to 65535.
Share Secret Key
Empty
The share secret key, the key number also has to match with
the Server setting. Up to 64 characters are allowed.
Secondary RADIUS Server
Server IP
Empty
Enter the IP address of RADIUS server.
Authentication Port
1812
Enter the authentication port number; the authentication port
number must match with the secondary RADIUS server
setting. The allowed numbers are from 0 to 65535.
Accounting Port
1813
Enter the accounting port number; the accounting port number
must match with the secondary RADIUS server setting. The
allowed numbers are from 0 to 65535.
Share Secret Key
Empty
The share secret key, the key number also has to match with
the secondary RADIUS Server setting. Up to 64 characters are
allowed.
Retry times when
1
Specify the retry times when primary fail.
Primary fail
44
Easy Hotspot Kit
Item
Retry Frequency ~
Default
Description
3
The field default value is 3 seconds.
Accounting Service
Disable
Enables or disables the accounting service.
Interim Update Time
5 Minutes Specify the interim update time.
Authentication Method
CHAP
Enter the authentication method of RADIUS server.
Enable
Disable
Enables or disables WISPr Smart Client roaming function.
Login Mode
Directly
Options: Directly Reply, Proxy Reply with “Redirect Login
Reply
Page” URL and Proxy Reply with Specific URL. The login
Seconds
WISPr Smart Client
mode information for the IPASS GIS connection. (Provided by
your ISP).
Easy Hotspot Kit
45
3-2-2
3-2-2-1
BILLING
Billing
The function is used to setup a billing profile. A billing profile is a description of how you want to charge
your customer.
Figure 39 Billing Setting Screen
46
Easy Hotspot Kit
If you change billing mode (Pre-paidÆPost-paid or Post-paidÆPre-paid), the system will erase all
account and disconnect all on-line users.
Figure 40 Message Box
Item
Default
Enable Credit Card Service Disable
Description
Enables or disables the credit card service. Before you
enable credit card service, make sure that your credit
service is configured to work and the currency is American
dollars. You must be converting all prices on your billing
page into American dollars (U.S. dollars). For details, see
section 3-2-8 Credit Service. The credit card function only
supports the American dollars.
Easy Hotspot Kit
47
Figure 41 Credit Service Setting Screen
48
Easy Hotspot Kit
Figure 42 Error Dialog Box (Credit Card Service=Enable)
Item
Time to Finish
Default
Enable
Description
The subscriber can access Internet only one time with one account.
Once subscriber login, the pre-defined usage time will start until run
out even the subscriber stop to access the Internet before run out.
Accumulation
Accumulation
Disable
The subscriber can access Internet many times with one account. The
system can keep and accumulate every single usage time until the
pre-defined usage time run out.
Idle Time Out
5 Min(s) The idle time out valid range is 1-1440. If the idle time out is set as 5
minutes, it means if the account doesn’t send packet in 5 minutes, the
account will logout automatically.
Accumulation
Time to Finish
login
login
A
logout
B
Time Bar
C
login
A
logout
login
logout
Usage time= A+B+C
Time Bar
finish
Usage time= A
Figure 43 Accumulation and Time to Finish
Easy Hotspot Kit
49
Item
Post-Paid
Default
Disable
Description
The subscribers can access Internet without pre-defined
usage time. This can be operated with an optional
external PS/2 keypad that is connected with exclusive
printer. The printout will only show the
username/password. An account can also to be
terminated with the optional keypad.
Idle Time Out
5 Min(s) The idle time out valid range is 1-1440. If the idle time out
is set as 5 minutes, it means if the account doesn’t send
packet in 5 minutes, the account will logout automatically.
Billing Profile
Currency
$
Enter the appropriate currency unit or currency symbol.
Number of decimals places 2
Enter the number. The field maximum value is 3.
Tax Percentage
This check box is used to indicate the taxable status of
Disable
the account.
No.
5%
Enter the tax rate (i.e. a 5% sales tax is entered as 5).
+1~+10
The index number of billing profile. In Advanced setup, we
provide 10 billing profile.
Active
-
Name
-
Click on check box, active or inactive the billing profile.
It is the name of billing profile. The maximum allowed
characters length is 12.
Account Usage time
-
Charge
-
The duration of the billing period. When this period
expires, user account will be discontinued.
Enter the unit rate amount (i.e. 35.00) that most of your
accounts are charged for one day of service.
Figure 44 Pre-paid Procedure Diagram
50
Easy Hotspot Kit
Figure 45 Post-paid Procedure Diagram
Click Apply button to save the new settings.
Figure 46 Success Dialog Box
Easy Hotspot Kit
51
3-2-2-2
Accounting
This function allow service provider to generate the subscriber accounts.
Figure 47 Accounting Setting Screen
52
Easy Hotspot Kit
Figure 48
Item
Default
Description
Expiration
Un-used account will be
24 hours Enter the number of hours/minutes/days. The field maximum
deleted after ~hours
value is 30 hours/minutes/days.
automatically
Accumulation account
3 months Enter the number and select time unit from list box. The field
will be deleted after
maximum value is 30 month/ days/ hours.
logged in ~
Printout
Number of copies to print 1
The system allows you to print all your bills. Select one number
of copies by clicking in the list box.
Can be replenished by
Click the check box to enable the replenish function.
subscriber
Easy Hotspot Kit
53
Figure 49 Account Process DiagramCan be replenished by subscriber=Enable
z
Three-Button Printer/ Web-based Account Generator Panel
Figure 50 Three-Button Printer/ Web-based Account Generator Panel Setting Screen
Item
Button A~C
Default
-
Description
Define each button’s billing profile. Select one billing
profile by clicking in the list box.
Print to…
Account
Select a printer to print out your account.
Generator
Printer
54
Easy Hotspot Kit
Item
Default
Description
Use ~ for Discount
Button A,
Select one button (A~C) by clicking in the list box to
Price Plan based on
Disable
assign the base charge and select enable to active the
“Button Presses”
discount price plan.
Click on button to preview and operate account generator panel.
Figure 51 Account Generator Panel
Figure 52 Web-based Account Generator Printout (Time to Finish)
Easy Hotspot Kit
55
Figure 53 PC-connected Printer Printout (Time to Finish)
56
Easy Hotspot Kit
Figure 54 Web-based Account Generator Printout (Accumulation)
Easy Hotspot Kit
57
Figure 55 PC-connected Printer Printout (Accumulation)
Note: Before configuring the accounting, you have to setting the billing profile of Web-based account
generator panel.
58
Easy Hotspot Kit
Example: If press 7 times
z
Discount Price Plan based on “Button Presses” is disabled.
Figure 56 Example 1
Amount: 7 x $2.00= $14.00
Figure 57 Account Printout
Easy Hotspot Kit
59
z Discount Price Plan based on “Button Presses” is enabled.
z The Charge by level is disabled.
Figure 58 Example 2
Amount: 7 x $ 1 = $ 7.00
60
Easy Hotspot Kit
Below is an example of the account printout.
Figure 59 Account Printout
Easy Hotspot Kit
61
z Discount Price Plan based on “Button Presses” is enabled.
z Charge by level is enabled.
Figure 60 Example 3
Amount: 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00
62
Easy Hotspot Kit
Below is an example of the account printout.
Figure 61 Account Printout
Easy Hotspot Kit
63
z Discount Price Plan based on “Button Presses”
Figure 62 Discount Price Plan Setting Screen
Item
Default
Description
Charge by levels
Enable
Enables or disables the charge by levels function.
Level
1~10
This field displays the level number of charge rate.
Conditions
When>=
The discount condition.
Button Presses
-
Enter the times of pressing button.
Unit Price
-
Enter the amount of charge level.
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Accounting setting
screen.
Figure 63 Success Dialog Box
64
Easy Hotspot Kit
3-2-2-3
Credit Card
Wireless Subscriber Gateway provides three credit card services (Authorize.net, iValidate.net,
Secure Pay and Paypal) that allow service provider to authorize, process, and manage credit
transactions directly from Internet.
Figure 64 Credit Card Setting Screen
Easy Hotspot Kit
65
Item
Default
Description
Authorize.net
Version
3.1
This field displays the merchant version.
Merchant ID
Empty
Enter your Merchant ID. This is a Merchant Identification
Number that you’re received from your Merchant Provider.
The maximum character of the Merchant ID is 50.
Merchant Password
This is a Merchant password that you’re received from your Merchant
Provider.
Need
Disable
If your Merchant Provider need password to authorize, click
the check box to enable this function.
Password
Empty
Enter your Merchant password.
Merchant Transaction
Empty
The Merchant Transaction Key can be obtained directly
Key
from “Authorize.net”. The Merchant Transaction Key is
similar to a password and is used by the Payment Gateway
to authenticate transactions. The maximum character of the
Merchant Transaction Key is 50.
Payment Gateway
https://secur Enter the address of Payment Gateway.
e.authorize.
net/gateway
/transact.dll
Email Additional
The Email Additional Information included subscriber username and
Information
password would be sent to subscriber.
Email Additional
Disable
Indicates whether Email additional information should be
Disable
Indicates whether Merchant Name should be sent to the
Empty
Enter the merchant’s company name. The maximum
Information
Merchant Name
sent to the subscriber (customer).
Enable/Disable
Merchant Name
Email of subscriber.
allowed characters length is 40.
Username and Password Disable
The Email Additional Information included subscriber
Enable/Disable
username and password would be sent to subscriber.
Usage Time
Disable
Enable/Disable
The Email Additional Information included subscriber usage
time would be sent to the subscriber.
iValidate.net
Merchant ID
Empty
Enter your Merchant ID. This is a Merchant Identification
Number that you’re received from your Merchant Provider.
The maximum character of the Merchant ID is 20.
Device ID
Empty
Enter your Device ID. This is a Device Identification Number
that you’re received from your Merchant Provider. The
maximum character of the Device ID is 20.
66
Easy Hotspot Kit
Item
Secure Server Address
Default
Description
https://www. Enter the secure server address.
vious.net/m
erchant/proc
esscc.asp
Secure Pay
Merchant ID
Empty
Enter your Merchant ID. This is a Merchant Identification
Number that you’re received from your Merchant Provider.
The maximum character of the Merchant ID is 7.
Secure Pay Address
https://www. Enter the address of SecurePay Payment Gateway.
securepay.c
om.au/secur
epay/payme
nts/process
2.asp
Paypal
Business
Empty
Enter your Merchant PayPal account. This is a Merchant
Identification account that you’re register on PayPal.
The maximum character of the Business is 127.
Currency Code
U.S. Dollar
To Drop-down the list. It’s includes Australia dollar,
Canadian Dollar, Euro, Pound Sterling,
Japanese Yen ,
U.S. Dollars, Czech Koruna, Danish Kroner, Hong Kong
Dollars, Hungarian Forint, New Zealand Dollars, Norwegian
Kroner, Polish Zloty, Singapore Dollars, Swedish Kronor,
Swiss Francs,
Identity Token
Empty
Enter the Identities token form merchants profile in the
Paypal site.
The maximum character of the Identity Token is 160.
Payment Gateway
https://www. Enter the address of Payment Gateway.
paypal/cgi-bi The maximum character of the payment gateway is 100.
n/webscr
Note:Please leave the Administrator’s Email address in Advanced/Syslog/Email portion.
Credit Card icons to be
displayed on the login
VISA
Click on check box to display credit card icon on the login
page.
page
Easy Hotspot Kit
67
Item
World Pay
Default
Description
The currently support currencies are as follows: GBP (Pounds Sterling),
Japanese Yen, AUD (Australian dollar), CAD (Canadian Dollar), Eur
(Euro), New Zealand Dollar, Indian Rupee, Singapore dollar and USD
(US Dollar).
Payment Gateway
Enter the payment gateway address. The default value is
“select.worldpay.com/wcc/purchase”.
Installation ID
The unique reference number, assigned by WorldPay, for a
particular Select installation. This is the number you send to
Empty
WorldPay in your payment form. You will probably have at
least two of these; one for the live installation and one for
testing.
Currency Code
Empty
Enter the currency code.
Description
Empty
Enter a description of payment page.
Test Mode
Enables or disables test mode function.
Disable,
Success
Select test mode by clicking in the list box.
Success─to make a successful test transaction.
Fail─for a failed transaction.
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Accounting setting
screen.
Figure 65 Success Dialog Box
Please follow steps below to pay using credit card.
Step 1: Choose Credit Card service on the login page.
68
Easy Hotspot Kit
Click
Click
Figure 66 Login Page
Easy Hotspot Kit
69
2: Select Service and enter payment information.
Currency: American Dollars
Figure 67 Service & Payment Information Setting Screen (Authorize.net)
Item
Default
Description
Payment Information
Credit card number
Empty
Enter your credit card number.
Credit card expiration date
Empty
Enter the credit card expiration date. The allowed format is
MMYY.
Enter Email Address
Empty
Enter your email address. The system will e-mail you
account information once your payment information has
been successfully authorized.
First Name, Last Name…..
Empty
Enter the customer information, including name, city, country
and country.
70
Easy Hotspot Kit
Figure 68 Service & Payment Information Setting Screen (iValidate.net)
Item
Default
Description
Payment Information
Credit card number
Empty
Enter your credit card number.
Credit card expiration date
Empty
Enter the credit card expiration date. The allowed format is
MMYY.
Enter Email Address
Empty
Enter your email address. The system will e-mail your
account information once your payment information has
been successfully authorized.
Billing Address ZIP code
Easy Hotspot Kit
Empty
Enter the ZIP code.
71
Figure 69 Service & Payment Information Setting Screen (Secure Pay)
Item
Default
Description
Payment Information
Credit card number
Empty
Enter your credit card number.
Credit card expiration date
Empty
Enter the credit card expiration date. The allowed format is
MMYY.
Enter Email Address
Empty
Enter your email address. The system will e-mail your
account information once your payment information has
been successfully authorized.
72
Easy Hotspot Kit
Figure 70 Service & Payment Information Setting Screen (Paypal and WorldPay)
Easy Hotspot Kit
73
Step 3: After valid payment information has been provided, the subscriber will obtain one valid account
to login screen will appear.
Figure 71 User Account Information
Figure 72
74
Easy Hotspot Kit
3-2-3
3-2-3-1
MANAGEMENT
LAN Devices
Administrator can direct remote control to LAN Devices via the Wireless Subscriber Gateway
implemented the feature.
Figure 73 LAN Devices Setting Screen
Easy Hotspot Kit
75
Item
Default
Polling Interval
5 Min.
Description
The default value is 5 minutes. The Polling Interval valid range is 1 to
1440.
Device Name
Empty
The LAN device name. The maximum character of the device name
is 20.
Virtual Port
0
The virtual port number valid range is 60001 to 60050 or 5900 to
5910.
Device IP Address
Empty
Device Server Port
0
Enter the IP address of LAN device in the format “xxx.xxx.xxx.xxx”
Enter the server port of LAN device.
Device MAC Address Empty
The MAC address of LAN device. For input the device MAC
Application
Select one protocol type of LAN device by clicking in the list box.
address, please use this format such like”0050BA8D2296”.
TCP
Click Apply button to save the new settings.
Note: The system does not support FTP.
76
Easy Hotspot Kit
3-2-3-2
Syslog
The function allows the device to transmit event messages to your syslog server or your email address
for monitoring and troubleshooting.
z Syslog Setting
Figure 74 Syslog Setting Screen
Item
Syslog
Default
Description
Disable
Enables or disables the syslog server function.
Empty
Enter syslog server’s IP address. The Wireless Subscriber
Syslog on LAN
Server IP Address
Gateway will send all of its logs to the specified syslog server.
Server MAC Address Empty
Enter the syslog server’s MAC address. The Wireless Subscriber
Gateway will send all of its logs to the specified syslog server.
Easy Hotspot Kit
77
Item
Default
Description
Syslog on WAN
Server 1 IP Address
Empty
Enter IP address of first syslog server.
Server 2 IP Address
Empty
Enter IP address of second syslog server.
Send to Email
Disable
Enables or disables the send to e-mail function.
E-mail Server
IP Address or Domain Empty
Enter the SMTP server IP address or domain name. The
Name
maximum allowed characters length is 50.
SMTP Port
25
The SMTP port allowed range is 25 or 2500 to 2599.
E-mail (SMTP) Server Disable
If your SMTP server requires authentication before accepting
needs to check my
e-mail, click on check box. These values (username and
account
password) are supplied by your network administrator, SMTP
server provider or ISP.
Username
Empty
Enter the username for the SMTP server. The maximum allowed
Password
Empty
Enter the password for the SMTP server
Empty
Enter the name you would like to appear in the “message from”
characters length is 64.
Email From
Name
field of your outgoing message. The maximum allowed
characters length is 20.
Email Address
Empty
Enter your e-mail address. This is the address others will use to
send email to Email Address 1/Email Address 2.
Email To
Email Address 1
Empty
Enter your first e-mail address to receive the logs.
Email Address 2
Empty
Enter your second e-mail address to receive the logs.
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Syslog setting screen
Figure 75 Success Dialog Box
78
Easy Hotspot Kit
z Log Categories
Figure 76 Log Settings Screen
Easy Hotspot Kit
79
Item
Interval Time
Description
System
Device Information
5~60 minutes
The log included system information would be sent
according to specified interval time.
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=DVI;
DATE=07Mar26;TIME=11:30:00;
WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02;
WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;
SYS_UP_TIME=14D23H34M21S;WANTXOK=99999;
WANRXOK=99999;WANTXERROR=99999;WANRXERROR=99999;
LANTXOK=99999;LANRXOK=99999;LANTXERROR=99999;
LANRXERROR=99999;WIRELESSTXOK=99999;WIRELESSRXOK=99999;
WIRELESSTXERROR=99999;WIRELESSRXERROR=99999;
WAN_QUALITY=5;
System Up Notice
When system
If device have been rebooted or restarted, the log would
rebooted or restarted be sent.
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=SUN;
DATE=07Mar26;TIME=15:23:32;
WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02;
WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;
SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei;
COUNTRY=Taiwan; FIRMWARE=v1.01.02;MESSAGE=System_Up;
Message = System_Reboot
System Account
When system
A log will be sent if system manager (Administrator) login
Activity Information
manager login or
to or logout from the device
logout
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=SUN;
DATE=07Mar26;TIME=15:23:32;
WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02;
WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;
SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei;
COUNTRY=Taiwan;
FIRMWARE=v1.01.02;MESSAGE=System_Up;
Account Name = Admin | Supervisor | Operator
Status= Login | Logout | Idle_Time_Out
Firmware Update
When firmware
A log will be sent if firmware update completed
Notice
update completed
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=FUN;
DATE=07Mar26;TIME=15:23:32;
WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02;
WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;
MESSAGE=Success;OLD_FRIMWARE=v1.00.01;
NEW_FIRMWARE=v1.00.02
Message = Success | Fail
80
Easy Hotspot Kit
Item
Interval Time
Description
Wireless Association 5~60 minutes.
A log including wireless users information will be sent
Information
according to specified interval time.
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=WAI;
DATE=07Mar26;TIME=15:23:32;
WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02;
WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;
USER_NUM=15;SEQ=1-5;USER_MAC=02-34-3e-01-00;
User
User Login
When user logged-in
A log including users information will be sent when user
logged –in
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=ULI;DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_IP=10.59.1.1;
USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet;
USER_TYPE=Dynamic;
User Type = Dynamic / Super / User Agreement / Radius / No-Auth
When User Replenish login format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=URP;DATE=07Mar26;
TIME=15:23:32; WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;
REP_USER_NAME=kifm2fs3;USER_IP=10.59.1.1;
USER_MAC=02-34-3e-01-00; INTERFACE=Ethernet;
USER_TYPE=Dynamic; USED_TIME=24:00:00;TIME_LEFT=24:00:00
User Type = Dynamic / Radius
User Logout
When user
A log including users information will be sent when user
logged-out
logged –out
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=ULO;DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_IP=10.59.1.1;
USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet;
USER_TYPE=Dynamic;RXDATA=1234; TXDATA=1234;
USED_TIME=24:00:00;LOGOUT_TYPE=Time_Up;TIME_LEFT=24:00:00
User Type = Dynamic / Super / User Agreement / Radius / No-Auth
Current User List
.
A log including logged-in users information will be sent
according to specified interval time
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=CUL;DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NUM=0;SEQ=1-5;
USER_NAME=asdfg12,USER_IP=10.59.1.2,USER_MAC=02-34-3e-01-00,
INTERFACE=Ethernet,USER_TYPE=Dynamic,RXDATA=1234,
TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLAN_SIG=N/A;
Easy Hotspot Kit
81
Item
Interval Time
Description
USER_NAME=dk6uf2eg,USER_IP=10.59.1.3,USER_MAC=02-34-3e-01-02,
INTERFACE=Wireless,USER_TYPE=Dynamic,RXDATA=1234,
TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLAN_SIG=100%;
User Type = Dynamic / Super / User Agreement / Radius / No-Auth
User Name = If the type of user is Super/User Agreement/No-Auth , the
username=****
Account and Billing
Account Information When an account is A log will be sent when an account is created
created
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=ACI;DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;
ACCOUNT_TYPE=TimetoFinish; ACCOUNT_SERIAL=000002;
ACCOUNT_PRICE= USD20.00; ACCOUNT_USAGE_TIME=10:59:59;
BILLING_INDEX=1;BILLING_UNIT=2;
Account Type = TimeToFinish / Accumulation / PostPaid
Account Price = Currencyxx.xx
Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD
Billing Amount
When received
A log will be sent when received amount
amount
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=BLA; DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;USER_NAME=username; BILL_TYPE=Cash,
BILL_AMOUNT= USD50.00
Billing Type= Cash | Credit_Card; Billing Amount = xx.xx
Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD……
LAN Devices
LAN Device
The detecting time
A log including current LAN Devices Status will be sent
Information
on LAN DEVICES
according to specified interval time
page
Format:
PRODUCT=WG-604;VER=2.00.00;LOGNAME=LDS;DATE=07Mar26;
TIME=15:23:32;WANMAC=09-00-0e-00-00-01;
LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03;
IP_ADDRESS=210.66.37.21;LAN_DV_NUM=15;SEQ=1-10;
LAN_DV_NAME=abcd, STATUS=OK
Status = OK | Fail
82
Easy Hotspot Kit
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Logs setting screen.
Figure 77 Success Dialog Box
Easy Hotspot Kit
83
3-2-3-3
Session Trace
Session Trace is an intelligent function to help service provider to trace every user’s access behavior.
When “session trace” is enable , the system will collect information such like destination IP, destination
port, source IP, source MAC, source port by every user and send the collected information in text
format file to specified TFTP server or Email Server.
Figure 78 Session Trace Setting Screen
Item
Default
Description
Session Trace
Disable
Disables or enables session trace function.
Primary TFTP Server IP
Empty
Enter the IP address of the primary TFTP server.
Empty
Enter the IP address of the second TFTP server.
Address
Secondary TFTP Server
IP Address
Send Session Trace log
file every~ minutes.
84
10 minutes The field means to send the session trace log file every
interval minutes. The value range is 5 to 1440 (minutes).
Easy Hotspot Kit
Item
Send to Email
Default
Disable
Description
Enables or disables the send to e-mail function.
E-mail Server
IP Address or Domain Empty
Enter the SMTP server IP address or domain name. The
Name
maximum allowed characters length is 50.
SMTP Port
Empty
The SMTP port allowed range is 25 or 2500 to 2599.
E-mail (SMTP) Server Disable
If your SMTP server requires authentication before accepting
needs to check my
e-mail, click on check box. These values (username and
account
password) are supplied by your network administrator, SMTP
server provider or ISP.
Username
Empty
Enter the username for the SMTP server. The maximum allowed
Password
Empty
Enter the password for the SMTP server
Empty
Enter the name you would like to appear in the “message from”
characters length is 64.
Email From
Name
field of your outgoing message. The maximum allowed
characters length is 20.
Email Address
Empty
Enter your e-mail address. This is the address others will use to
send email to Email Address 1/Email Address 2.
Email To
Email Address 1
Empty
Enter your first e-mail address to receive the logs.
Email Address 2
Empty
Enter your second e-mail address to receive the logs.
Easy Hotspot Kit
85
3-2-3-4
Bandwidth
The function enables administrator to limit bandwidth usage on a per user basis (MAC address). That
prevents users from consuming a disproportionately large amount of bandwidth so every user gets a
fair share of the available bandwidth.
Figure 79
Item
Default
Bandwidth Setting Screen
Description
Bandwidth
Disable
Enables or disables Bandwidth Management.
Maximum Upstream
64Kbps
Specify the amount of upstream bandwidth.
Maximum Downstream
128Kbps Specify the amount of downstream bandwidth.
86
Easy Hotspot Kit
3-2-3-5
SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network
Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or
consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration
screen.
Figure 80 SNMP Setting Screen
Item
Default
Description
SNMP
Disable
Disables or enables the SNMP management.
SNMP Port
161
If the SNMP enables, also allowed to specific the SNMP port
Trap Port
162
number via NAT. The allowed SNMP port numbers are 161
(default), 16100-16199 and Trap port numbers are 162 (default),
16200-16299. This Port setting is useful for remote control via
NAT network.
Configuration
Community Name public/private Every unit with SNMP enable must be configured to recognize
one or more community names up to 20 characters. The default
setting for the community of entry 1 is “public” and for the entry 2
is “private” and others are empty.
NMS Address
ANY
The address of the NMS. The default settings for the NMS
Networking are “ANY”.
Easy Hotspot Kit
87
Item
Privileges
Default
Description
Read/Write
Choose “Read”, “Write”, “Trap Recipients” and “All” for different
privileges. The default setting of the entry 2 is “write” and others
are “read”.
Status
Valid/Invalid
Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are
valid and others are invalid.
3-2-4
SECURITY
3-2-4-1
Pass Through
This function allow administrator to set some special devices pass through the Wireless Subscriber
Gateway system. Because some network devices might be constructed under the Wireless Subscriber
Gateway. However these devices needn’t be checked and authorized. The Wireless Subscriber
Gateway provides a pass through list and the administrator can control which devices can be pass
through with authentication.
Figure 81 Pass through Setting Screen
88
Easy Hotspot Kit
Item
Default
Description
Pass Through
Disable
Enables or disables the pass through function.
Destination URL/IP Address Pass Through
URL or Website
Empty
Enter the URL Page; please use this format such like
“http://www.yahoo.com”. The maximum character of the URL Page
is 50.
Start IP Address
Empty
Enter the start IP address of you wants pass through.
End IP Address
Empty
Enter the end IP address of you wants pass through.
Subscriber IP/MAC Address or LAN Device Pass Through
Start IP Address
Empty
Enter the start IP address of you wants pass through.
End IP Address
Empty
Enter the end IP address of you wants pass through.
IP Address
Empty
Enter the IP address of you wants pass through.
Subnet Mask
Empty
Enter the subnet mask of you wants pass through.
MAC Address
Empty
Enter the MAC address of you wants pass through.
Mask
Empty
Enter the subnet mask of you wants pass through.
Pass Through List Display the pass through Information of Wireless Subscriber Gateway.
No.
-
The index number of pass through address.
Active
Disable
Click on check box, active or inactive the pass through address.
Address List
-
Display the pass through address(s).
Type
-
Display the type of pass through address.
Delete
Disable
Select the check boxes and click ‘Delete’ to delete the pass through
address(s).
Click Add to List button to add a new entry.
Click Apply button to save the new settings.
Click Delete All & Apply button to delete all entries.
Note: The priority of "pass through" is higher than "Filtering".
Easy Hotspot Kit
89
3-2-4-2
Filtering
Filtering allows the system administrator to have a list of restricted destinations, which is useful to block
specified Internet websites or Intranet areas.
Figure 82 Filtering Setting Screen
Item
Default
Description
Filtering
Disable
HTTP Message
The Web Site Enter the http message. The maximum character of the HTTP
Enables or disables filtering function.
to display when a is blocked by message is 200.
website is
System
blocked
Figure 83 Error Dialog Box
90
Easy Hotspot Kit
Item
Default
Description
Restrict Destination
URL or Website
Empty
Enter the URL Page of you wants to filter; please use this format
such like “http://www.yahoo.com”. The maximum character of the
URL Page is 50.
Start IP Address
Empty
Enter the start IP address of you wants to filter.
End IP Address
Empty
Enter the end IP address of you wants to filter.
IP Address
Empty
Enter the destination IP address of you wants to filter.
Subnet Mask
Empty
Enter the destination subnet mask.
No
-
The index number of filtering address.
Active
Disable
Click on check box, active or inactive the filtering address.
Address List
-
Display the filtering address(s).
Delete
Disable
Select the check boxes and click ‘Delete’ to delete the filtering
address(s).
Click Add to List button to add a new entry.
Click Apply button to save the new settings.
Click Delete All & Apply button to delete all entries.
Note: The priority of "pass through" is higher than "Filtering".
Easy Hotspot Kit
91
3-2-4-3
Share
This feature allows sharing the network devices after subscriber successful login.
Figure 84 Share Device Setting Screen
Item
Default
Description
Share LAN resource
Disable Enables or disables share LAN resource function.
Resource Name
Empty Enter the device name. The maximum character of the
Resource IP Address
Empty Enter the IP address of device in the format “xxx.xxx.xxx.xxx”.
resource name is 30.
Resource MAC Address Empty Enter the MAC address of device. For input the device MAC
address, please use this format such like”0050BA8D2296”.
Interface
Wired
Select the interface.
No.
-
The index number of share LAN device.
Active
Disable Click on check box, active or inactive the share LAN device.
Share LAN resource List
Resource Name
-
Display the device name.
IP Address
-
Display the IP address of device.
MAC Address
-
Display the MAC address of device.
Interface
-
Display the interface of device.
Delete
Disable Select the check boxes and click ‘Delete’ to delete the share
device(s).
Note:
1. You must use the “Search IP” method to search for a device on the network. Please follow steps
below to search your device.
) Click Start, and then click Search.
92
Easy Hotspot Kit
) Click Computers or People.
) Click “A computer on the network”.
) In Computer, type the IP address of the device you want to find. Click Search.
2. The function support only Unicast and IP Protocol.
Click Add to List button to add a new entry.
Click Apply button to save the new settings.
Click Delete All & Apply button to delete all entries.
Easy Hotspot Kit
93
3-2-4-4
Secure Remote
This feature allows you to create a secure connection to a remote site or back end system with VPN
PPTP Client. If “Secure Remote” is enabled, the RADIUS packet/ syslog will be transferred to this
secure connection.
Figure 85 Secure Remote Setting Screen
Item
Auto-connect at
Default
Disable
Start-up (Always
Description
Enable the check box to automatically establish the PPTP
connection.
connect)
PPTP Server IP
Empty
Enter the PPTP server IP address provided by your ISP.
Empty
Enter the user name provided by your ISP. The user name can
address
Username
consist of up to 80 alphanumeric characters and is case
sensitive.
Password
Empty
Enter the user password provided by your ISP. The password
can consist of up to 80 alphanumeric characters and is case
sensitive.
Click on Start/Stop connection button to start/stop PPTP
connection.
Click on refresh button to update the status.
94
VPN Tunnel
Display the status.
Client IP
Display the IP address.
Easy Hotspot Kit
3-2-5
SYSTEM
3-2-4-1
System
Define the Wireless Subscriber Gateway System configuration.
Figure 86 System Setting Screen
Easy Hotspot Kit
95
Figure 87 System Setting Screen
Item
Default
Description
The
system
name
can
consist
of
up
to
40
System/Host Name
Empty
Domain Name
Empty
Location Information
Empty
Enter your location information.
System
The system date of the Wireless Subscriber Gateway.
Date
The valid setting of year is from 2002 to 2035.
alphanumeric characters.
The Domain
name can consist of up to 80
alphanumeric characters.
Date/Time
Date (Year/Month/Day)
Time (Hour:Minute:Second)
System
Time
-
-
96
The system time of the Wireless Subscriber Gateway.
Click “Get from my Computer” button to correct the
system date and time.
Click “Get from NTP server” button to correct the
system date and time.
Easy Hotspot Kit
Item
Default
Description
Enables or disables NTP (Network Time Protocol)
Time Server. Network Time Protocol can be utilized to
NTP Setting
Disable
synchronize the time on devices across a network. A
NTP Time Server is utilized to obtain the correct time
from a time source and adjust the local time.
Enter the IP address/domain name of NTP server. The
Server IP/Domain Name
Empty
Time Zone
GMT-12:00 Select the appropriate time zone for your location.
Update Time
0 hours
Enter the number of hours for update time.
Disable
Enables or disables Daylight Saving Time (DST).
maximum allowed characters length is 100.
Set the Daylight Saving Time (DST) on the Wireless
Daylight Saving Time
Month/Day Subscriber Gateway. Adjust the begin time and end
time.
NAT (Network Address Translation)
NAT
Enable
Enables or disables NAT Address Translation function.
Enables or disables user session limit function. This
User Session Limited
Enable,30
feature provides you an ability to control a number of
sessions allowed for particulars user(s) at the one
time.
IP Plug and Play (iPnP
Technology)
Enables or disables plug & play function. When
Enable
enabled, the user needn’t change their network
configuration to access the Internet.
If enable plug and play is selected, you can enable
Layer 2 Isolation Security
Enable
Layer 2 Isolation Security function. When the “Layer 2
Isolation
Security”
enabled,
everyone
cannot
communicate with each other.
Secure administrator IP
Addresses
Multicast Pass Through
Options: Any and Specify. Administrator can specify 5
Any
IP addresses or a range to allow remote control access
from network.
Disable
This function allows for multiple transmissions to
specific recipients at same time.
This function allows remote user to ping the Wireless
Allow remote user to ping the
device
Enable
Subscriber Gateway through Internet. Ping is normally
used to test the physical connection between two
devices, to ensure that everything is working correctly.
Easy Hotspot Kit
97
Item
Default
Description
Option: default or customize certificate, These are two
ways to create a certificate, one is purchase a
SSL Certificate
Default
certificate from a certificate authority (Ex. Verisign or
Thawte), and another is creating a self-certificate (For
example: Uses OpenSSL tool).
Click Apply button to save the new settings.
Click Apply button, then Restart dialog box will appear. Click Apply to restart the system.
Figure 88 Restart Dialog Box
3-2-4-2
WAN/LAN
Figure 89 WAN/LAN Setting Screen
Click Apply button to save the new settings.
Click Apply button, then Restart dialog box will appear. Click Apply to restart the system.
98
Easy Hotspot Kit
Figure 90 Restart Dialog Box
z
Device IP (LAN IP) Setting
Figure 91 Device IP (LAN IP) Setting
Item
Default
IP Address
10.59.1.1
Description
The internal LAN IP address of your Wireless Subscriber Server
Gateway.
Subnet Mask
z
255.0.0.0
Enter the subnet mask for the IP address.
WAN MAC Address
Figure 92 WAN MAC Address Setting
Item
IP Address
z
Description
The default MAC address is set to the WAN physical interface on device.
WAN Port Mode
Figure 93 WAN Port Mode Setting
Easy Hotspot Kit
99
DHCP Client
The device can work as a DHCP client. This allows the device to obtain the IP address and other
TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP
Client.
Figure 94 DHCP Client Setting Screen
Static IP
Figure 95 Static IP Setting Screen
Item
Description
IP Address
Enter the IP address for the xDSL/Cable connection (provided by your
Subnet Mask
Enter the subnet mask for the IP address.
ISP).
Gateway IP Gateway
Enter the Gateway IP address for the xDSL/Cable connection (provided by
your ISP).
Primary DNS Server
A primary DNS server IP address for the xDSL/Cable connection (provided
by your ISP).
Secondary DNS Server
A secondary DNS server IP address for the xDSL/Cable connection
(provided by your ISP). If the primary DNS Server IP were not available,
meanwhile, Secondary DNS Server IP would start in the same time.
100
Easy Hotspot Kit
PPPoE
Figure 96 PPPoE Setting Screen
Item
Default
Description
User Name
Empty
Enter your PPPoE account name. The user name can consist
Password
Empty
Enter your PPPoE password. The password can consist of
PPP MTU Setting
1492
MTU (Maximum Transfer Unit) specifies maximum
of up to 80 alphanumeric characters and is case sensitive.
up to 80 alphanumeric characters and is case sensitive.
transmission unit size.
TCP MSS Setting
1452
MSS (Maximum Segment Size) specifies maximum segment
size.
Easy Hotspot Kit
101
Item
Service Name
Default
Empty
Description
Enter the service name provided by your ISP. The service
name can consist of up to 64 alphanumeric characters and is
case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable
You can configure your Wireless Subscriber Gateway to cut
Max Idle Time
your connection with your ISP after a specified period of time
10 Minutes
(Max Idle Time). If you have been disconnected due to
inactivity, Connect on Demand enables your Wireless
Subscriber Gateway to automatically re-establish your
connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain,
click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Keep alive and Redial Period
Keep alive
Disable
Redial Period
30 Seconds connected indefinitely, even when it sits idle. The Redial
This option keeps your PPPoE enabled Internet access
Period maximum value is 65535 seconds.
102
Easy Hotspot Kit
PPTP
Figure 97 PPTP Setting Screen
Item
My IP Address
Default
Empty
Description
A PPTP local IP address for the xDSL/Cable connection
(provided by your ISP).
My Subnet Mask
Empty
Enter the PPTP local IP address for the xDSL/Cable
connection.
Gateway IP Address
Empty
A PPTP local default gateway for the xDSL/Cable
connection (provided by your ISP).
PPTP Server IP Address
Empty
Enter the PPTP server IP address for the xDSL/Cable
Username
Empty
Enter your PPTP account name. The user name can
connection (provided by your ISP).
consist of up to 80 alphanumeric characters and is case
sensitive.
Easy Hotspot Kit
103
Item
Password
Default
Empty
Description
Enter your PPTP password. The password can consist
of up to 80 alphanumeric characters and is case
sensitive.
PPP MTU Setting
1460
MTU (Maximum Transfer Unit) specifies maximum
transmission unit size.
TCP MSS Setting
1400
MSS (Maximum Segment Size) specifies maximum
segment size.
Connection ID/Name
Empty
Enter the connection ID or connection name. The
connection
ID/Name
can
consist
of
up
to
81
alphanumeric characters and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand
Enable
You can configure your Wireless Subscriber Gateway to
Max Idle Time
10 Minutes
cut your connection with your ISP after a specified
period of time (Max Idle Time). If you have been
disconnected due to inactivity, Connect on Demand
enables
your
Wireless
Subscriber
Gateway
to
automatically re-establish your connection as soon as
you attempt to access the Internet again. If you wish to
activate Connect on Demand, click the radio button. If
you want your Internet connection to remain, click the
radio button of keep alive. The Max Idle Time maximum
value is 65535 minutes.
Keep alive and Redial Period
This option keeps your PPTP enabled Internet access
Keep alive
Disable
connected indefinitely, even when it sits idle. The Redial
Period maximum value is 65535 seconds.
104
Easy Hotspot Kit
3-2-4-3
Server
Figure 98 Server Setting Screen
Item
Default
Description
Web Server
Enter the HTTP port number. The HTTP port allowed
HTTP Port
80
range is 80 or 8010 to 8060. For access the Wireless
Subscriber Gateway system under NAT, please tab the
“http://HTTP Port IP Address: Port Number”.
Enter the HTTPS port number. The HTTPS port allowed
HTTPS Port
443
range is 443 or 4430 to 4440. For access the Wireless
Subscriber
Gateway
system,
please
tab
the
“https://HTTPS Port IP Address: Port Number”.
The idle time out valid range is 1-1440. If the idle time out
Administrator Idle-Timeout 5 Minutes
is set as 5 minutes, it means if the administrator doesn’t
send packet in 5 minutes, the administrator will logout
automatically.
Easy Hotspot Kit
105
Item
Default
Description
There are three types of DHCP Services.
DHCP Server
Enable
DHCP Disable—Disable the DHCP server function.
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
DHCP Relay
DHCP Server IP Address
DHCP Server
DHCP Pool Starting
Address
Pool Size
Lease Time
To route DHCP through an external server, the administrator needs to
enable the DHCP relay and assign a valid DHCP server IP address.
Empty
Enter the IP address of DHCP server.
The Wireless Subscriber Gateway's DHCP server is turned on and
running by default when you install it in your network.
10.59.1.2 Enter the DHCP Pool Starting IP address.
253
The DHCP pool size range is 1 to 512.
300
The DHCP lease time. The DHCP lease time range is 1 to
Minutes
71582788 minutes.
Primary DNS Server
168.95.1.1 Enter the IP address of the network’s primary DNS server.
Secondary DNS Server
Empty
Enter the IP address of a second DNS server on the
network.
Email Server Redirect
To prevent some subscriber’s original Email server may protect by
firewall or NAT network. Wireless Subscriber Gateway provides an
extra Email server parameter to forward the subscriber’s Email. The
Wireless Subscriber Gateway not only forwards the subscribers’
E-mail via other E-mail server but also changes the SMTP header.
The recipient of your E-mail sees the message as if you sent it from
your local Internet Service Provide, not form the hotel or other place.
Note: Before setting this sever, please make sure the e-mail sever
relay function is opened. It must not exceed 50 characters.
IP Address or Domain
Empty
Enter the E-mail server IP address or domain name.
25
Enter the SMTP port number for mail server. The SMTP
Name
SMTP Port
port allowed range is 25 or 2500 to 2599.
Click Apply button to save the new settings.
106
Easy Hotspot Kit
Static DHCP
This function allows subscriber to assign IP address on the LAN to specific individual computers based
on their MAC Address.
Figure 99 Server Setting Screen
Default
Item
IP Address
Empty
Description
Enter the IP address that subscriber want to assign to the
computer on LAN with the MAC address the subscriber will
also specify
MAC Address
Empty
Enter the MAC address of a computer on your LAN
Click Apply button to save the new settings.
Easy Hotspot Kit
107
3-2-4-4
Keypad
Figure 100 Keypad Setting Screen
108
Easy Hotspot Kit
Item
Use for Pre-Paid Billing
Default
Description
The system provides ten user definable hot keys through the use of the
+ Key plus the 1 through 0 keys across the top of the keypad.
Keypad Hot Key
+1~+0
It is the combination hot key for keypad application.
Billing Profile
-
Select the billing profile you want to assign to the
combination hot key.
Use for Post-Paid Billing
Define the basic rate of accounts.
Base on ~
Minutes
Select the billing unit by clicking in the list box.
Charge by levels
Enable
Enables or disables the charge by levels function.
Level (1~10)
1~10
This field displays the level number of charge rate.
Time Range
0
Enter the number.
Unit Price
-
Enter the amount of charge level.
Please follow steps below to create accounts using keypad function.
z Use for Pre-Paid Billing
Step 1: Click the Billing in the Advanced Setup menu, select enable Pre-Paid, click Apply.
Figure 101 Billing Setting Screen
Easy Hotspot Kit
109
Step 2: Click the Keypad in Advanced Setup Menu, define the Billing plan of pre-paid, and click Apply.
Figure 102 Keypad’s Hot Key Setting Screen
Step 3: You can use keypad to create subscriber accounts now. Press keypad hot key and then press
Enter. A new subscriber account is generated, and the account information should be printed.
Figure 103
110
Easy Hotspot Kit
Step 4: Subscriber can use this account to access Internet now.
z Use for Post-Paid Billing
Step 1: Click the Billing in the Advanced Setup menu, select enable Post-paid, click Apply.
Figure 104 Billing Setting Screen
Step 2: Click the Keypad in Advanced Setup Menu, Define the billing plan of post-paid, click Apply.
Figure 105 Keypad’s Hot Key Setting Screen
Easy Hotspot Kit
111
Step 3: You can use keypad to create subscriber accounts now. Press / Enter, a new subscriber
account is generated, and the account information should be printed. This account information is
including serial number, username, password and account create time.
Figure 106
Step 4: When subscriber wants to terminate the Internet service, press”
- ”, serial number and then
press Enter, a bill should be printed.
Figure 107
112
Easy Hotspot Kit
Account Generator Printer
PS/2 Keypad
Enter the date (MonthDate )
Figure 108 Keypad’s Hot Key List
z Daily Account Report Printout
Press ABCAA
B: Billing Profile
UN: Purchase Unit
Figure 109 Daily Account
Easy Hotspot Kit
113
z Monthly Account Report Printout
Press ABCBB
B: Billing Profile
UN: Purchase Unit
Figure 110 Monthly Account
z System Status Report Printout
Press ABCCC
Figure 111 System Status Report Printout
114
Easy Hotspot Kit
z Network Report Printout
Press ABCAB
Figure 112 Network Report Printout
Easy Hotspot Kit
115
3-2-4-5
Customization
z Login Page
The Wireless Subscriber Gateway provides three different login page formats, including standard,
redirect, advanced and frame format.
Standard
For some service providers, they may hope to have a customize subscriber’s login page to the users.
This function helps them to realize the ideal. The page elements are including login page title,
background color, subtitle etc.
Figure 113 Standard Login Page Customization Setting Screen
Item
Default
Description
Logo
Disable
Title
Welcome Enter the title name of subscriber login page. The maximum
Select the check box to display service provider’s logo.
Subtitle
Hot Spot
Enter the subtitle name of subscriber login page. The maximum
Internet
allowed characters length is 80.
allowed characters length is 80.
Service
Footnote
Disable
Allow the administrator to input the footnote such like “Pleas
Contact to our Customer Service Center, EXT 141”. The maximum
character of the footnote is 240.
116
Easy Hotspot Kit
Item
Copyright
Default
Description
Enable
The copyright is allowed the administrator to input a paragraph in
the subscriber login page for copyright information. The maximum
character of the copyright is 80.
Background Color FFFFFF
The background text color can be specified color. For the specified
text color format please views the color grid. The allowed format is
Hexadecimal.
Figure 114 Login Page Screen
Before you add logo to the login page, please make sure the logo image file is
defined. For details, see section 3-2-10 Customization->Logo
Figure 115 Error Dialog Box
Easy Hotspot Kit
117
Redirect
This allow service provider to redirect the subscriber’s browser to a specified home page.
Figure 116 Redirect Login Page Setting Screen
Copy and paste the following HTML Code into your home page to produce redirect subscriber login
page.
Figure 117 Redirect Login Page Code Screen
118
Easy Hotspot Kit
Advanced
This function allow user to design login page of Wireless Subscriber Gateway.
Figure 118 Advanced Login Page Setting Screen
Item
Default
Description
Welcome Slogan
Welcome The maximum allowed characters length is 80.
Page Background
None
The page background can be none or specified color. For the
background color format please views the color grid. The allowed
format is Hexadecimal.
Article
Empty
The article is allowed the administrator to input a paragraph in the
subscriber login page for advisement or announcement. The
maximum character of the article is 1024.
Article Text Color
000000
The article text color can be specified color. For the specified text color
format please views the color grid. The allowed format is
Hexadecimal.
Article Background None
The article background can be specified color. For the background
Color
color format please views the color grid. The allowed format is
Hexadecimal.
Information
Empty
Allow the administrator to input the text information such like address,
telephone number and fax information. The maximum character of the
information is 80.
Comments
Empty
Allow the administrator to input the text comments such like “Pleas
Contact to our Customer Service Center, EXT 141”. The maximum
character of the comment is 80.
Easy Hotspot Kit
119
Figure 119 Color Gird
Frame
If “Frame” is selected the subscriber login page will be separate into Top Frame and Bottom Frame.
Bottom Frame is a default format for username and password input, Top Frame is allowed to be
specified a URL to link.
www.caesarpark.com
Figure 120 Frame Login Page Setting Screen
Item
Default
Top Frame URL Link Empty
Description
The input format can be http://www.yahoo.com. The maximum
character of the URL Link is 200.
Bottom Frame
120
-
This frame will show the standard login page.
Easy Hotspot Kit
Figure 121 Example-Login Page Screen
z Logo
This function allows service provider to upload the customer’s logo image file which can be shown on
the standard login page and account printout of PC-connected printer.
Figure 122 Logo Setting Screen
Easy Hotspot Kit
121
Item
File Path
Default
Empty
Description
Enter the file pathname of the logo file in the File Path field.
Click Apply button to save the logo file to system.
Click Delete button to delete the logo file.
Figure 123 Logo Setting Screen
Figure 124 Login Page
122
Easy Hotspot Kit
Information Window
This function allow service provider can decide whether they want an “Information Window” pop-up on
subscriber PC when authenticate successful or not and specified text of information window.
Subscriber can type “http://1.1.1.1/info” to open the information window again or enter
“http://1.1.1.1/logout” to logout immediately if accumulation billing selected.
Figure 125 Example-Login Page Screen
Easy Hotspot Kit
123
Figure 126 Example-Login Page Screen
Billing Type=Time to Finish
Can be replenished by subscriber=Disable
Figure 127 Information Window
Billing Type=Time to Finish
Can be replenished by subscriber=Enable
Figure 128 Information Window
124
Easy Hotspot Kit
Billing Type=Accumulation
Can be replenished by subscriber=Disable
Figure 129 Information Window
Billing Type=Accumulation
Can be replenished by subscriber=Enable
Figure 130 Information Window
Easy Hotspot Kit
125
Account Printout
This function allow service provider to specified text of account printout.
Figure 131 Account Printout Customization Setting Screen
126
Easy Hotspot Kit
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Account Printout
Customization setting screen.
Figure 132 Success Dialog Box
Figure 133 PC-connected Printer Printout
Easy Hotspot Kit
127
Figure 134 Account Generator Printer Printout
Figure 135 Account Generator Printer Printout
128
Easy Hotspot Kit
Credot
Standard Login Page
This function allow service provider to customize the additional credit card message for the standard
login page.
Figure 136 Credit Customization Setting Screen
Figure 137 Standard Login Page(Enable Credit Card Service=enable)
Figure 138 Billing Setting Scree
Easy Hotspot Kit
129
Service Selection Page
This function allow service provider to customize the additional credit card message for the standard
login page.
Customer Information
Figure 139 Service Selection Page Setting Screen(Authorize.net)
130
Easy Hotspot Kit
Figure 140 Service Selection Page Setting Screen (iValidate.net)
Figure 141Service Selection Page Setting Screen (Secure Pay)
Easy Hotspot Kit
131
Figure 142 Service Selection Page Setting Screen (PalPay and WorldPay)
Figure 143 Service Selection Page Setting Screen(Authorize.net)
132
Easy Hotspot Kit
Figure 144 Service Selection Page Setting Screen (iValidate.net)
Figure 145Service Selection Page Setting Screen (Secure Pay)
Easy Hotspot Kit
133
Figure 146 Service Selection Page Setting Screen (PalPay and WorldPay)
Successful Page
Figure 147 Successful Page Setting Screen
134
Easy Hotspot Kit
Figure 148 Example-Successful Page
Fail Page
This function allow service provider to customize the message for the fail page.
Figure 149 Fail Page Setting Screen
Click Apply button to save the new settings.
Easy Hotspot Kit
135
Figure 150 Fail Page
Click Apply button, the success dialog box appears. Click on Back to return to Credit Card
Customization setting screen.
Figure 151 Success Dialog Box
136
Easy Hotspot Kit
User Agreement Page
This function allow user to design user agreement page of Internet Subscriber Server.
Figure 152 User Agreement Page Setting Screen
Figure 153 User Agreement Page
Easy Hotspot Kit
137
3-2-4-6
Portal Page
This feature allows redirecting subscriber’s browser to a specified portal page after successful login.
Figure 154 Portal Page Setting Screen
Item
Default
URL Link
Empty
Description
Enter the URL Link page. The input format can be
“http://www.yahoo.com”. The maximum character of the URL Link is 200.
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Portal Page setting
screen.
Figure 155 Success Dialog Box
138
Easy Hotspot Kit
3-2-4-7
Advertisement
The system allow service provider to input 10 URL links for advertisement link purpose.
Figure 156 Advertisement URL Link Setting Screen
Item
Default
Frequency One Time
Only
Description
One Time Only—One Time Only means to send the advertisement link
once after the subscriber Login.
Every~Min(s)—The field means to send the advertisement link every
interval minutes. The value range is 1 to 60 (minutes).
Sequence Randomly
Randomly—Display the advertisement page in the random order.
URL Link Empty
This function allows the administrator to input ten different websites in the
1~10
table for advertisement. And these 10 websites will display to the
From 1 to 10 —Display the advertisement page in the order as setting.
subscribers at random when the subscribers login in the Wireless
Subscriber
Gateway
system.
The
input
format
can
be
“http://www.yahoo.com”. The maximum character of the URL Link # is 200.
Click Apply button to save the new settings.
Easy Hotspot Kit
139
Click Apply button, the success dialog box appears. Click on Back to return to Advertisement URL Link
setting screen.
Figure 157 Success Dialog Box
3-2-4-8
Walled Garden
We prepare ten URL links that allows subscriber to access the specific Web pages even they didn’t
have a username or password. It’s free trying and can use for advertisement.
Yahoo
tw.yahoo.com
MSN
www.msn.com
Microsoft
www.microsoft.com
Figure 158 Walled Garden
140
Easy Hotspot Kit
Name
Figure 159 Login Page
Item
Description
Link 1~10
Name
The name is allowed user to set the prompt string in user customize login page. The
maximum allowed characters length is 80.
URL 1~10
The input format can be “http://www.yahoo.com”. The maximum character of the
Link# is 200.
Click Apply button, the success dialog box appears. Click on Back to return to Walled Garden setting
screen.
Figure 160 Success Dialog Box
Easy Hotspot Kit
141
3-2-4-9
DDNS
The DDNS service (Dynamic Domain Name Service), an IP Registry provides a public central database
where information such as email addresses, host names, IP addresses etc. can be stored and retrieved.
This solves the problems if your DNS server uses an IP associated with dynamic IP addresses. When
the ISP assigns the Wireless Subscriber Gateway a new IP, the Wireless Subscriber Gateway must
inform the DDNS server the change of this IP so that the server can update its IP-to-DNS entry. Once
the IP-to-DNS table in the DDNS server is updated, the DNS name for your web server (i.e.,
xyz.dyndns.org) is still usable.
Figure 161 DDNS Setting Screen
142
Easy Hotspot Kit
Item
Force to update every
Default
1 day
~day(s) when WAN IP
Description
Enter a number in the field to set the force update interval
(in days).
address keeps no
change
No
01~03
The index number of a DDNS account.
Active
Disable
Click on check box, active or inactive the DDNS record.
Click the Update Status Now button to do manual update.
Settings
Enter the account information of DDNS Server.
Status
YY/MM/DD
Display the update date, time and status. The Status area
HH:MM:SS:
shows the update time and current state of the DDNS
Client.
N/A—DDNS Client service not installed.
Update Successfully—DDNS Client service installed;
service running.
Update Fail—DDNS Client service installed; service not
running.
Service Provider
Dyndns.org
Select a DDNS service provider by clicking in the list box.
(www.dyndns.org) Note: Before configuring the DDNS settings, you have to
register a dynamic domain at one of the dynamic domain
service providers’ list box.
Registered Host Name
Empty
Enter the host name of DDNS server. The maximum
character of the registered host name is 100.
Login Name
Empty
Enter the user name of DDNS server.
Password
Empty
Enter the user password of DDNS server.
Email Address
Empty
Enter your email address. The DDNS Server will e-mail
you important information once your Internet Name has
been successfully registered.
Wildcards (optional)
Disable
Enable this function to be able to use
*.mydomain.dyndns.org and not only
mydomain.dyndns.org.
Click Apply button to save the new settings
Click Apply button, the success dialog box appears. Click on Back to return to DDNS setting screen.
Easy Hotspot Kit
143
Figure 162 Success Dialog Box
144
Easy Hotspot Kit
3-2-4-10 Wireless
Figure 163 Wireless Setting Screen
Easy Hotspot Kit
145
Item
Default
Description
General Settings
Wireless Connection Enable
To Enable or Disable wireless connection.
The ESSID is the unique name that is shared among all
ESSID
Wireless
points in a wireless network. It is case sensitive and must not
exceed 32 characters.
Channel
6
Security
Disable
Select the channel ID for wireless connection.
Select disable to allow wireless station to communicate with
the device without any data encryption. Select enable to
enable WPA or WEP data encryption.
WPA2 and WPA
Wi-Fi Protected Access Encryption
Encryption
Enter a pre-shared key from 8 to 63 case sensitive ASCII
Pre-shared Key
Empty
characters.
Group Key
86400 Seconds Enter a number in the field to set the force re-keying interval.
Re-Keying
Use WPA with
Enable
Pre-shared Key
Enter a pre-shared key from 8 to 63 case sensitive ASCII
Pre-Shared Key
Empty
characters.
Use WPA with
RADIUS
Disable
Enter the RADIUS server IP address or domain name. The
Server IP
Empty
maximum allowed characters length is 15.
Enter the authentication port number. The allowed numbers
Authentication Port
1812
are from 0 to 65535.
Share Secret Key
Empty
Enter the RADIUS secret key
WEP Encryption
Wired Equivalent Privacy Encryption
Encryption
64 bit
The Wireless Subscriber Gateway supports 64-bit or 128 bit
WEP encryption.
Options: HEX (Hexadecimal) and ASCII (American Standard
Mode
HEX
Code for Information Interchange).
146
Easy Hotspot Kit
Item
Default
Description
This selects which of the Keys the Wireless Subscriber
Gateway uses when it transmits. You can change the
selected encryption key every now and then to increase the
security of your network.
Note: You have to configure all WEP keys (1~4), and select
one of the four WEP key.
WEP Key
1
Enter 5 characters (case sensitive) for ASCII 64-bit WEP
Key.
Enter 10 characters (case sensitive) for Hex 64-bit WEP Key.
Enter 13 characters (case sensitive) for ASCII 128-bit WEP
Key.
Enter 26 characters (case sensitive) for Hex 128-bit WEP
Key.
802.1x
Disable
Encryption
64 bit
Enables or disables the 802.1x function.
The Wireless Subscriber Gateway supports 64-bit or 128 bit
802.1x encryption.
Re-key Time
86400 Seconds Enter a number in the field to set the force re-keying interval.
Server IP
Empty
Authentication Port
1812
Enter the RADIUS server IP address or domain name. The
maximum allowed characters length is 15.
Enter the authentication port number. The allowed numbers
are from 0 to 65535.
Share Secret Key
Empty
Beacon Interval
200
Enter the RADIUS secret key.
This value valid range is 1 to 1000 indicates the frequency
interval of the beacon.
This value valid range is 256-2342. This setting determines
the packet size at which the Wireless Subscriber Gateway
issues a request to send (RTS) before sending the packet. A
low RTS Threshold setting can be useful in areas where
RTS Threshold
2347
many client devices are associating with the Wireless
Subscriber Gateway, or in areas where the clients are far
apart and can detect only the Wireless Subscriber Gateway
and not each other.
Easy Hotspot Kit
147
Item
Default
Description
This setting determines the size at which packets are
Fragmentation
2432
Threshold
fragmented. Enter a setting ranging from 256 to 2432 bytes.
Use a low setting in areas where communication is poor or
where there is a great deal of radio interference.
The preamble type is a section of data at the head of a
Preamble Type
packet that contains information the Wireless Subscriber
Long Preamble Gateway and client devices need when sending and
receiving packets. The setting menu allows you to select a
long, short or dynamic preamble type.
Select open system, shared Key or both.
Open System—Allows any device to authenticate and then
attempt to communicate with the Wireless Subscriber
Gateway. Using open authentication, any wireless device can
authenticate with the Wireless Subscriber Gateway, but the
device can only communicate if its WEP keys match the
Wireless Subscriber Gateway. Devices not using WEP do not
attempt to authenticate with a Wireless Service Gateway that
is using WEP.
Shared Key—During shared key authentication, the Wireless
Subscriber Gateway sends an unencrypted challenge text
string to any device attempting to communicate with the
Authentication
Open System
Method
Wireless Subscriber Gateway. The device-requesting
authentication encrypts the challenge text and sends it back
to the Wireless Subscriber Gateway. If the challenge text is
encrypted correctly, the Wireless Subscriber Gateway allows
the requesting device to authenticate. Both the unencrypted
challenge and the encrypted challenge can be monitored,
however, which leaves the Wireless Subscriber Gateway
open to attack from an intruder who calculates the WEP key
by comparing the unencrypted and encrypted text strings.
Because of this weakness, shared key authentication can be
less secure than open authentication.
Both—With this setting wireless stations can communicate
with or without data encryption.
Click Apply button to save the new settings.
Click Apply button, the restart dialog box appears. Click on Apply to restart the system.
148
Easy Hotspot Kit
Figure 164 Restart Dialog Box
This operation will load the default manufacturer configuration to the system. All this
page (Wireless) configuration setup will be replaced by default settings.
3-2-4-11 Account Generator
Figure 165 Account Generator Printer Setting Screen
Easy Hotspot Kit
149
Figure 166 Application
150
Easy Hotspot Kit
3-3 System Status
Display Wireless Subscriber Gateway system basic status, including,
1.
System
2.
Account List
3.
Account Log
4.
Current User
5.
DHCP Clients
6.
Session List
7.
LAN Devices
Figure 167 System Status Item Screen
Easy Hotspot Kit
151
3-4-1
System
The System Information Menu displays current system basic information including the service
connection message, host name, LAN, WAN, DHCP Configuration, DNS, E-mail Redirection, SSL
Certificate, network traffic Information and the system firmware version number.
Figure 168 System Status Screen
152
Easy Hotspot Kit
Figure 169 System Status Screen
Easy Hotspot Kit
153
3-4-2
Account List
You can display a list of all the account information on this device. This table includes the username,
password, usage time, time created, login time, expiration time and status.
Figure 170
Account List
Click on refresh button to update the account list page.
Click the column button to sort the column in ascending/descending order.
Select the check boxes and click ‘Delete’ to delete the accounts.
Delete all accounts in account list.
Note: This page will refresh automatically every 5 minutes.
154
Easy Hotspot Kit
3-4-3
Account Log
The account log shows the accounts’ log information.
Figure 171 Account Log
This allow you to export the account logs to a text file format. (export.log)
Click on Clear Log to remove all account log entries.
Click on refresh button to update the account log page.
Click the column button to sort the column in ascending/descending order.
Easy Hotspot Kit
155
3-4-4
Current User
Display the current logged-in subscribers’ status. It allow service provider to disconnect any
subscribers.
Figure 172 Current User List
Figure 173 Current User List (super account)
Figure 174 Current User List (No Authentication)
Click on refresh button to update the current user list page.
Type
Username
IP Address
MAC Address
Click the column button to sort the column in ascending/descending order.
Select the check boxes and click ‘Disconnect’ to disconnect accounts.
Disconnect all accounts in current user list.
156
Easy Hotspot Kit
3-4-5
DHCP Clients
The DHCP client table shows the current DHCP users on the LAN.
Figure 175 Current User Screen
3-4-6
Session List
The remote site administrator could monitor the real time usage status of Wireless Subscriber Gateway
via this page.
Figure 176 Session List Screen
Easy Hotspot Kit
157
3-4-7
LAN Devices
You can manage all devices by clicking on device name to access device’s Web-based interface.
Click
Figure 177 LAN Devices Status Screen
Figure 178 Example- Ethernet Switch Management Screen
3-4 System Tools
This allows service provider or administrator to process Firmware upgrade, change password and
backup or restore configuration.
1.
Configuration
2.
Firmware
3.
Boot Code
4.
System Account
5.
SSL Certificate
6.
Ping Command
7.
Restart
8.
Logout
Figure 179 System Tools Item
158
Easy Hotspot Kit
3-4-1
Configuration
Use the Configuration item to save, restore or reset configuration parameters of the Wireless
Subscriber Gateway.
Figure 180 Configuration Setting Screen
Item
Backup
Default
Description
Click it to save the system configuration to your computer. (export.cfg)
Remote TFTP Server IP Empty
Enter the IP address of TFTP Server.
Address
File Name
Empty
Enter the file name in the File Name field.
Restore
Click it to restore your system configuration.
Local PC File Path
Empty
Enter the file pathname of the system configuration file in the
Local PC File Path field.
Remote TFTP Server IP Empty
Enter the IP address of TFTP Server.
Address
File Name
Empty
Enter the file name in the File Name field.
Reset the system back
Erase all setting and back to factory setting.
to factory defaults
Keep subscriber profile
Disable
Click the keep subscriber profile to change all the parameters
into factory setting but still reserve the subscriber profiles.
Easy Hotspot Kit
159
3-4-2
Firmware Upgrade
The Firmware Upgrade menu loads updated firmware to be permanent in flash ROM. The download file
should be a binary file from factory; otherwise the agent will not accept it. After downloading the new
firmware, the agent will automatically restart it.
z Manual Firmware Upgrade
Figure 181 Manual Firmware Upgrade Setting Screen
Item
Default
Description
This allow administrator to upgrade the firmware via HTTP.
Local PC File Path
Empty
Enter the file name and location in the Local PC File Path
field.
This allows administrator use TFTP server to upgrade firmware.
Remote TFTP Server IP
Empty
Enter the IP address of TFTP Server.
Empty
Enter the file name in the File Name field.
Address
File Name
Note:
1. Before downloading the new firmware, users must save the configuration file for restore
configuration parameters of the device.
2. Do not turn the power off during the upgrade process. This will damage the unit.
160
Easy Hotspot Kit
z Scheduled Firmware Upgrade
Scheduled Firmware Upgrade is a program that enables an automatic upgrade to the latest firmware
version through the TFTP server.
Figure 182 Scheduled Firmware Upgrade Setting Screen
Item
Default
Description
Disable/Enable
Disables or enables the scheduled firmware upgrade function.
TFTP Server IP
Empty
Enter the IP address of TFTP Server.
File Synchronization
Empty
Enter the
file name and location in the
File
Synchronization field.
Click the button to display synchronization file example.
Frequency
Weekly
Set the firmware upgrade time. The default value is
“Weekly”.
Figure 183 Synchronization File Sample Code
Note: Do not turn the power off during the upgrade process. This will damage the unit.
Easy Hotspot Kit
161
3-4-3
Boot Code
Figure 184 Boot Code Upgrade Setting Screen
3-4-4
System Account
Use the System Account screen to change the system accounts.
Figure 185 System Account Setting Screen
162
Easy Hotspot Kit
Item
Description
Username
The username can consist of up to 20 alphanumeric characters and is sensitive.
Password
The password can consist of up to 20 alphanumeric characters and is sensitive.
Confirm
The password for confirmation.
Super Subscriber Disables or enables the super account function.
Idle Time Out
The user idle time out valid is 1 to 1440 minutes. If the idle time out is set as 5
minutes, it means if the account doesn’t send packet in 5 minutes, the account
will logout automatically.
z Administrator Account
Step 1: Start your Web browser and enter the factory default IP address 10.59.1.1 in your browser’s
location box. Press Enter.
Figure 186 Web Browser Location Field (Factory Default)
Step 2: The Wireless Subscriber Gateway configuration main menu will appear. Enter admin (default)
as the Username and admin (default) as the password and click Login. If you are first time
setting the system, the wizard setup screen will appear.
Username: admin
Password: admin
Figure 187 Administrator Account Login Screen (First Time)
Easy Hotspot Kit
163
Figure 188 System Quick View
z
Web-Based Accounting Manager
Step 1: Start your Web browser and enter the factory default IP address 10.59.1.1 in your browser’s
location box. Press Enter.
Figure 189 Web Browser Location Field (Factory Default)
164
Easy Hotspot Kit
Step 2: The Wireless Subscriber Gateway configuration main menu will appear. Enter account as the
Username and account as the password and click Login
Username: account
Password: account
Figure 190 Web-Based Accounting Manager Login Screen
Step 3: After a valid user name and password have been provided, the account Generator Panel
homepage will appear.
Figure 191 Account Generator Panel
Easy Hotspot Kit
165
z
Supervisor Account
Step 1: Start your Web browser and enter the factory default IP address 10.59.1.1 in your browser’s
location box. Press Enter.
Figure 192 Web Browser Location Field (Factory Default)
Step 2: The Wireless Subscriber Gateway configuration main menu will appear. Enter supervisor as
the Username and supervisor as the password and click Login.
Username: supervisor
Password: supervisor
Figure 193 Supervisor Account Login Screen
Step 3: After a valid user name and password have been provided, the Wireless Subscriber Gateway
configuration homepage will appear.
Disable
Figure 194 System Status Screen
166
Easy Hotspot Kit
z
Super Subscriber Account
Start your Web Browser; a subscriber login page will appear. Enter super as the Username and super
as the password and click Enter, you can use Internet now
Username: super
Password: super
Figure 195 Subscriber Login Page
3-4-5
SSL Certificate
The function allows you to download the registered CA certificate into the Wireless Subscriber
Gateway.
Figure 196 SSL Certificate Download Setting Screen
Note: The password field must the same as the CA’s registered password.
Easy Hotspot Kit
167
3-4-6
Pin Command
The Ping function can check the Wireless Subscriber Gateway networking connective or not.
Figure 197 Ping Command Screen
Item
IP or URL
168
Description
Enter the IP address or the URL link.
Easy Hotspot Kit
3-4-7
Restart
If your Wireless Subscriber Gateway is not operating correctly, you can choose this option to display
the restart Wireless Subscriber Gateway screen. Clicking the apply button restart the Wireless
Subscriber Gateway, with all of your settings remaining intact.
Figure 198 Restart Screen
3-4-8
Logout
If you would like to leave the configuration page, please click apply to exit.
Figure 199 Logout Screen
Easy Hotspot Kit
169
Appendix A Signal Connection Arrangements
RJ-45 Ethernet Port
The Wireless Subscriber Gateway RJ-45 Ethernet port can connect to any networking devices that use
a standard LAN interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or
shield twisted-pair (STP) cable to connect the networking device to the RJ-45 Ethernet port.
Depending on the type of connection, 10Mbps or 100Mbps, use the following Ethernet cable, as
prescribed.
10Mbps: Use EIA/TIA-568-100-Category 3, 4 or 5 cable.
100Mbps: Use EIA/TIA-568-100-Category 5 cable.
Figure 200
RJ-45 Connector and Cable Pins
Note: To prevent loss of signal, make sure that the length of any twisted-pair connection does not
exceed 100 meters.
170
Easy Hotspot Kit
Appendix B Regulations/EMI Compliance
FCC Regulatory Statement
Part 15-Class B compliant device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including that which may cause undesired
operation.
This equipment has been test and found to comply with the limits for a computing device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. The equipment and the receiver should be connected the outlets on separate circuits.
4. Consult the dealer or an experienced radio/television technician for help.
Changes or modification not expressly approved be the party responsible for compliance could void the
user’s authority to operate the equipment.
Easy Hotspot Kit
171
LIMITED WARRANTY
Easy Hotspot Kit
What the warranty covers:
We warrant its products to be free from defects in material and workmanship during the warranty period.
If a product proves to be defective in material or workmanship during the warranty period, we will at its
sole option repair or replace the product with a like product with a like product. Replacement product or
parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
The Easy Hotspot Kit is warranted for one year for all parts and one year for all labor from the date of
the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by us.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting our specifications.
g. Normal wears and tear.
h. Any other cause that does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact our Customer Support.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address (d) a description of the problem and (e) the serial number of the product.
3. Take or ship the product prepaid in the original container to your dealer, and our service center.
4. For additional information, contact your dealer or our Customer Service Center.
Limitation of implied warranties:
THERE ARE NOWARRANTIED, EXPRESSED OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages:
Our LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. We
SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSOMER BY ANY OTHER PARTY.
172
Easy Hotspot Kit
P/N:6830604-0010G V1.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising