AF Lighting 9125-FL 74 in. Arched Floor Lamp Installation Guide

Installation Instruction

Item No:

9124-FL & 9125-FL

1. Carefully unpack and take out the parts as picture shown.

2. Place the screw (B) through lock washer (C), iron washer (D), marble base (E), iron sheet (F) into the steel pipe (G), then tighten the screw (B) with the wrench (A).

3. Place the wheel (H) through the steel pipe, then place the screw (J) through the holes of the steel pipe into the wheel (H) and tighten with screwdriver (K).

4. Screw the turn-knob (L) through steel pipe (G) into the wheel (H).

5. Place the fabric shade (P) onto the socket (O), and secure with the socket ring (Q).

Note:

Swing turn-knob (L) is only to adjust arm (I) up and down, not side to side.

Swing wheel (M) is only to adjust arm (N) side to side, not up and down.

Note: 120V/100W