RJP-110W Series

Remote Jack Pack

(RJP-110W / RJP-110WBR)

Installation

& Setup Guide

Warranty

© Copyright 2007, LG Electronics U.S.A., Inc.

For Customer Support/Service, please call: 1-888-865-3026

www.lgcommercial.com

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK - - USE ONLY INDOORS

ATTENTION:

RISQUE DE CHOCS ÉLECTRIQUE - - POUR INSTALLATION À L¡¯INTÉRIEUR SEULEMENT

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

AVERTISSEMENT:

L’appareil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et de plus qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil.

REGULATORY INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Do not attempt to modify this product in any way (except as noted herein) without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

COMPLIANCE:

The responsible party for this product’s compliance is:

LG Electronics U.S.A., Inc., 2000 Millbrook Drive

Lincolnshire, IL 60069, USA • Phone: 1-847-941-8000.

Marketed and Distributed in the United States by LG Electronics U.S.A., Inc.

2000 Millbrook Drive, Lincolnshire, IL 60069

2

© Copyright 2007, LG Electronics U.S.A., Inc.

206-4061

Table of Contents

Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Installation

Installation in Cabinet Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installer Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

End-User Operation

End-User Connections Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

End-User Multi-Media Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

End-User Connectable Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

End-User Audio/Video Input Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Reference: 12-Foot Output Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Accessory Cable: DVI-HDMI Adapter Cable/Strain Relief . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 16

Troubleshooting

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Quick Setup Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: Model Number RJP-110W indicates the black cabinet.

Model Number RJP-110WBR indicates the brown cabinet.

206-4061

3

4

Overview

PR

E

S

S TO

RE

S

ET

7 AMP MAXIMUM CURRENT

DIGITAL VIDEO IN PC VIDEO IN VIDEO IN AUDIO IN

L R

AUDIO IN

The Remote Jack Pack (RJP) contains circuitry to determine the presence of a signal at each input jack.

(Note: Audio In, Audio In L-R and Video In inputs detect the presence of the inserted plug, regardless if a signal is present or not.)

When a source is detected, its priority is compared to the priority of other sources which may be present. If the newly-connected active source is of higher priority than the existing source(s), the RJP directs the TV display panel to that source.

Video and audio are monitored and switched independently.

Power is supplied to the RJP by the TV display panel via the control signal cable.

206-4061

206-4061-A

Overview

CLEANING CAUTION

:

Since the end-user jack panel is exposed, use extreme caution when cleaning. Do not use liquid cleaners on the connections panel. Do not allow liquids to be spilled, sprayed onto or otherwise come into contact with the connections panel on both the end-user side and the installer side. Clean with a slightly damp cloth.

7 AMPS MAXIMUM CURRENT TO AC OUTLETS:

The maximum combined total current that is allowable to the AC power outlets is 7 Amps. These are protected by a circuit breaker type re-settable fuse.

Introduction

Conveniently installed right in the room where guests will stay, the LG Remote

Jack Pack, (RJP) multi-media interface is available to end-users to connect audio, video and computer devices to hear and view on the in-room TV display panel.

The RJP can be set up to interface with the TV display panel to show the image and/or sound from a portable DVD/CD Player, Camcorder, MP-3 Player, Notebook computer, or portable Video Game Player. Or, devices with digital video output such as DVD players. If the end-user does not connect any devices, then the inroom TV display panel will remain on the source selected. When the end-user connects a device, the interface switches the TV display panel to the new source.

Users can recharge laptop or cell phone batteries while watching TV.

The RJP interface is designed to be able to process audio from one source, and video separately from a different source, if required. (The end-user can work on a laptop computer while listening to music from an MP-3 player.) However, only one audio and one video source can be heard/seen at the same time.

The end-user can simply plug the device’s power cord into one of the two convenience AC power outlets provided on the RJP. Then plug in its Audio/Video cable(s) to the RJP input jack(s) and turn the device on. The RJP completes the connection between the newly-connected audio and/or video source and the TV display panel. No end-user menus are involved, all connections are made directly to the interface.

The RJP continually monitors its source inputs. When a signal is detected, (a device is plugged into one of the RJP inputs) the interface sends a message to the TV display panel to switch to the newly-connected source (if the new source is of higher priority). The interface allows only the higher priority audio and video to be heard and seen on the TV display panel. The control cable supplies

12 Volt DC power from the TV display panel to operate the interface.

5

Installation in Cabinet Front Panel

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

DIGIT

AL VIDEO OUT

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

DIGIT

AL VIDEO OUT

The RJP-110W can only be installed in a vertical position into the cutout provided in the cabinet front panel. Vertical mounting in the cutout is required so that if liquid is spilled on the desk top, it will not be able to flow into the RJP. The

RJP must only be installed in the cutout opening. It will then need to be secured with the four retainer clips, serrated washers and machine screws provided. The cable wiring assembly and individual cables will need to be connected to the RJP. Route cable bundle to avoid damage from chaffing, binding etc.

Note: The connector set that is closest to the mesh sleeving is for hook up to the TV display panel.

Installation Instructions

1. Remove the cabinet front panel and insert the RJP into the cutout.

2. Install the four L-shaped mounting retainer clips, screws and serrated washers provided to hold the RJP securely in place. Check to assure that the RJP is securely mounted.

3. Make all connections to the RJP, see the following page for details.

4. Use self-stick cable supports to relieve strain on connectors at RJP.

5. After attaching cable hardware etc., reinstall front panel on the cabinet.

CAUTION: The cable wiring assembly should be handled carefully to avoid damage, as it is routed between display panel and the RJP. The AC power cord should be plugged into a dedicated and appropriate AC wall power outlet.

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

DIGIT

AL VIDEO OUT

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

DIGIT

AL VIDEO OUT

Adhesive-Backed Cable

Bundle Supports

Use adhesive-backed cable supports. Attach them to the back and underside of the cabinet where the weight of the cable bundle is likely to put strain on the connectors.

Note: The actual appearance of the cable assembly, cabinet, front panel, mounting hardware and cable clamps etc., may be different than shown in these drawings.

6

206-4061-A

Installer Connections

The RJP-110W and the cables listed below are to be connected to both the TV display panel and any other entertainment resources available in room.

CAUTION: Be sure power is turned off before attempting to connect the RJP-110W to the TV display panel and in-room resources.

Control Cable (8-Pin RJ-45) w/Yellow Protective Sleeve

Connect to RJP port on TV display panel.

206-4061-A

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

DIGIT

AL VIDEO OUT

AC Power Cord

Connect to 120V 60 Hz AC power outlet. Supplies power to the two convenience AC power outlets for the end-user. (Maximum combined total current to both outlets is 7 Amps.)

Digital Video Cable

Connect to digital video input on TV display panel.

RGB PC Video Cable

Connect to RGB input on

TV display panel.

Audio/Video Cables

Connect to Left-Right

Audio/Composite Video input jacks on TV display panel.

7

8

Installer Connections Contd.

After completing connections between the RJP, the TV display panel and other resources, be sure the installer menu items have been updated to enable the RJP.

Installer Menu item 040 Auto Camport needs to be set to 000 and 093 RJP

Available needs to be set to 001. (See TV installation guide for complete instructions on new TV installations.) A brief description of each of the available RJP connections is provided below.

Digital Video Output

Connect to digital video input on TV display panel to allow the end-user to show

DVD’s high-resolution digital video on the in-room TV.

PC RGB Output

Connect to RGB input on TV display panel to allow the end-user to show a computer/Laptop image on the in-room TV.

Control 8-Pin RJ-45 Output Port

Connect to RJP port on TV display panel for control and power supply for the RJP multi-media interface.

Left-Right Audio/Video Output Jacks

Connect to Left-Right Audio/composite Video inputs on TV display panel.

AC Power Cord (Installed on RJP)

Connect to standard 120V 60Hz AC power outlet.

(Four 120 Volt 60 Hz AC power outlets are provided for the end user.

However, 7 Amps. is the maximum combined current allowed for the AC outlets.

206-4061-A

End-User Connections Overview

PR

S S TO RE

ET

7 AMP MAXIMUM CURRENT

DIGITAL VIDEO IN PC VIDEO IN VIDEO IN AUDIO IN

L R

AUDIO IN

The end-user simply plugs a device such as a laptop computer with the appropriate cables, as shown in the example, into the RJP connection panel. The Remote Jack

Pack senses the new source connection and switches the TV to the newly-connected source. The device’s sound and image are then presented on the in-room TV display panel. The TV display panel adjusts automatically to the computer output format.

When the laptop is disconnected, the interface directs the TV to revert back to the previous source for video and audio.

Today's

Report

The end-user has several audio/video connection options available for connecting external devices. The guest/user can connect a portable DVD Player, CD

Player, Camcorder, MP-3

Player, Notebook Computer,

Typical

In-Room TV

Display Panel

Portable Video Game Player, etc. For added convenience, two AC power outlets are also available on the front of the interface to provide power for these external devices and/or recharge laptop or cell phone batteries.

(The maximum combined current allowed for the AC power outlets is 7 Amps.)

End-User

Connection Panel

S TO RE

7 AMP MAXIMUM CURRENT

DIGITAL VIDEO IN PC VIDEO IN VIDEO IN AUDIO IN

L R

AUDIO IN

Today's

Report

An end-user could connect and hear audio from one device and connect and view video from a different device.

The RJP offers two different stereo audio input jacks to accommodate various enduser devices. However, only the higher priority audio source will be selected and heard. Similarly, multiple video inputs are available, but only the higher priority video source will be selected and displayed. (See page 12 input priorities.)

206-4061

9

End-User Multi-Media Interface Connections

Reset Switch

Circuit breaker for

AC power outlets.

PR

E

S

S TO

RE

S

ET

7 AMP MAXIMUM CURRENT

AC Power Outlets

Two (2) convenience AC outlets for end-user. (Total combined current is

7 Amps maximum.)

Digital Video Input Port

Connection for digital video sources. (portable

DVD)

1 0

3.5 mm Stereo Audio

Input Jack

Connection for MP-3 player or PC audio.

DIGITAL VIDEO IN PC VIDEO IN VIDEO IN AUDIO IN

L R

AUDIO IN

Audio/Video Input Jacks

Connection for Left-Right

Audio/Composite Video sources.

PC Video (RGB) Input port

Connection for PC Video.

(Note: Audio In, Audio In

L-R and Video In inputs detect the presence of an inserted plug, regardless if a signal is present or not.)

206-4061

206-4061

End-User Connectable External Source Devices

Examples of devices a guest/end-user can connect are shown to the right.

There are two AC power outlets available on the jack pack for added convenience.

The End-User Can Connect:

• PC Laptop/Notebook Computers

• Portable Video Game Players

• Portable DVD/CD Players

• Camcorders

• Digital Cameras

• MP-3 Audio Players

1 1

End-User Audio/Video Input Priorities

End-User Audio/Video Input Priorities

Note: The highest priority is listed first.

Audio Inputs/Sources

1st.

3.5 mm Stereo Audio Jack

2nd.

Left - Right Audio Jacks

4th. TV Display Panel Tuner Audio (Audio Default)

Video Inputs

1st.

Digital Video

2nd.

PC Video

3rd.

Video Composite jack

4th.

TV Display Panel Tuner Video (Video Default)

1 2

206-4061-A

Reference

12-Foot Output Cable Assembly

AUDIO

L-R

VIDEO

CONTROL w/Yellow

Sleeve

RGB DIGITAL

VIDEO

14"

36"

85"

Note: Connector set near mesh sleeving hooks up to TV display panel.

6. Cable Tie

Mesh Sleeving

4.

5.

6.

Output Cable Assembly Parts List

Item Description

No.

1.

Left/Right Audio Cable.

2.

3.

Composite Video Cable.

RJ-45 Control Cable

w/Yellow Protective Sleeves.

RGB Cable.

Digital Video Cable.

Cable Ties.

Output

Cable

Assembly is

12.0

Feet in

Length

9"

206-4061

1.

AUDIO

L-R

2.

VIDEO

3.

CONTROL w/Yellow

Sleeve

4.

RGB

5.

DIGITAL

VIDEO

1 3

Accessory Cable: DVI to HDMI Adapter Cable

Strain Relief

Male

Connector

Female

Connector

Special Connections

Note: DVI to HDMI

Adapter Cable

For TVs equipped with

HDMI, this adapter cable will be required to connect the RJP for digital video/audio.

DVI/PC

AUDIO

IN

HDMI/DVI

IN

RS-232C

.....

PC IN

UPDATE

RS-232C

CONTROL

NORMAL

(DTV)

DIGTAL AUDIO

OUT (OPTICAL)

AUDIO IN

AUDIO IN

VIDEO 1 IN

VIDEO 2 IN

RJP

INTERFACE

FUTURE

USE

AC IN

Strain Relief for

Accessory HDMI Cable

The weight of the DVI adapter connection / cable bundle may put a strain on the HDMI connection, causing it to become disconnected from the TV. Relieve the weight by attaching a cable tie in the position shown.

Note: The actual appearance of the TV etc., may be different than shown in the drawing.

1 4

206-4061

Specifications

Application

Makes available to the hotel’s guests, a multi-media interface to the in-room TV display panel and media resources. Input jacks are provided for external portable devices such as DVD/CD Players, Laptop Computers,

Camcorders, etc.

Installer Connections

Digital Video Out Digital Video Connector

RGB OUT 15-pin RGB PC Monitor Connector

Control Out Control Jack (8-Pin RJ-45)

Video Out 1 Vpp into 75 ohms, Composite or Y+C Combined

Video Jack +/- 1 db @ 4.2 MHz

Audio Out L-R Left - Right Audio Jacks

Max: 1.6 V RMS (1 KHz) @ 600 ohms,

Typ: 250mV RMS @ 600 ohms

Supplied Accessories List

(Cable Assembly)

Note: All cables within cable bundle are 12 feet in length.

• Digital Video Cable

• PC Video RGB Cable

• Control Cable (8-Pin RJ-45)

• 1-Set Left-Right Audio/Video Cables

(Attached Cord)

(Misc. Hardware)

• AC Power Cord, 120V 60Hz

• 5-Retainer Clips, L-Shaped (4-Required)

• 5-Machine Screws w/Serrated Washers (4-Required)

• 4-Self-stick, Nylon-tie Cable Mounting Platforms

• 4-Cable Ties

• 1 Black Cable Tie (DVI to HDMI Adapter Cable see page 14.)

(Separate Cable) • DVI (F) to HDMI (M) Adapter Cable (Optional connection)

Note: Design and specifications are subject to change without prior notice.

1 5

206-4061-A

Specifications Contd.

Dimensions

Height 2.25 Inches (5.7 cm)

Width 13.75 Inches (34.9 cm)

Depth 3.5 Inches (8.9 cm)

Weight (Approx.) 2.15 Pounds (.975223 kgrms)

End-User Device Inputs

AC Outlets x 2 AC 120V 60Hz (Maximum 7 Amps.

total combined current allowed for AC outlets)

Audio In 3.5mm Stereo Audio Jack

Audio In L-R Left - Right Audio Jacks

(Nom In: 250mV RMS @ 22K ohms)

Overload In: 1.6V RMS Max

Video In Composite Video Jack

1 Vpp, 75 ohms

PC Video In 15-pin RGB PC Monitor Connector

Digital Video In Digital Video Connector

Regulatory

UL, FCC Class B, Digital Video Device

Environmental Parameters

Operating Temperature

Storage Temperature

Cooling

Humidity

0

° to 40

°

Degrees Celsius

(32

° to 104

°

Degrees Fahrenheit)

-20

° to 85

°

Degrees Celsius

(-4

° to 185

°

Degrees Fahrenheit)

Free Air Convection

10% to 90% Non-condensing

1 6

206-4061

Troubleshooting

Equipment Setup Analysis Notes

• Make sure all connectors and connections are tight and secure on user device, RJP-110W and TV.

• Check to assure user device, RJP-110W and TV are all powered up and working properly and that the TV Installer menu items are set correctly.

• Audio and Video can be from different sources. Default is TV tuner Audio and Video, if no other audio/video source is connected.

• Audio source must be viable. The audio output from the customer’s device must be present when connected to be heard at the TV.

• RJP AC circuit breaker maximum is 7 Amps. If 7 Amp current limit is exceeded, breaker will trip; unplug all accessory devices from RJP AC outlets and press RESET.

Test Procedures

• Test and connect only one user device to determine if RJP is providing audio/video to TV.

• Test user device on another RJP (perhaps located in a different room) to determine if user device is compatible with

RJP.

• On LCD or Plasma TV, Installer menu items:

040 Auto Camport needs to be disabled by setting it to 000.

093 RJP Available needs to be set to 001 to enable RJP mode..

Following are some possible solutions to problems:

Problem

No Power

Possible Cause(s) Check RJP, User Device and In-Room TV

• Power not connected?

• Circuit breaker on RJP tripped?

(Unplug all accessory devices from RJP AC outlets, press RESET.)

No Audio

No Video

Poor Video

206-4061

• Have all audio connections been made?

• Audio output available?

• Volume level turned up?

• Sound muted?

• TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.)

• Try another RJP.

• Priority level? (Disconnect other devices.)

• Connections made after 040 and 093 menu items set.

(Make connections before adjusting menu items 040 and 093.)

• Video output available?

• All video cables connected?

• TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.)

• Priority level? (Disconnect other devices.)

• Check connections. (Video pass-through no user action possible.)

1 7

Power

Failure?

No

Yes

Restore

Power

RJP

Is power cord connected

?

Yes

No

Connect

Power

Cord

RJP

Has Circuit

Breaker

Tripped

?

No

Yes

Remove AC load, press

RESET

TV

Is power cord connected

?

Yes

No

Connect

Power

Cord

TV

Is TV power turned on

?

Yes

No

Turn

Power

On

User

Device

Is power cord connected

?

Yes

No

Connect

Power

Cord

User

Device

Is device turned On

?

Yes

No

Turn

Power

On

Troubleshooting Flow Charts

No

Power

No Audio (or not desired

Audio)

RJP

Has Circuit

Breaker

Tripped

?

No

Yes

Remove AC load, press

RESET

RJP

Is Audio connected

?

Yes

No

Connect

Audio

Cables

RJP

Are other audio devices connected

?

No

Yes

Disconnect other

Audio devices

TV

Is TV turned

On

?

Yes

No

Turn

TV On

Are

Installer menu items set up?

TV

Are

Speakers turned Off

?

No

Yes

Turn

Speakers

On

TV

Is sound

Muted or set too low

?

No

Yes

Press

Volume

Up

User

Device

Is Audio connected

?

Yes

No

Connect

User

Device

Audio available & turned up

?

No

Turn

Volume

Up

1 8

No Video (or

not desired

Video)

RJP

Has Circuit

Breaker

Tripped

?

No

Yes

Remove AC load, press

RESET

RJP

Is Video connected

?

Yes

No

Connect

Video

Cables

RJP

Are other

Video devices connected

?

No

Yes

Disconnect other

Video devices

TV

Is TV turned

On

?

Yes

No

Turn

TV On

Are

Installer menu items set up?

User

Device

Is correct

Video output selected

?

No

Select correct Video output

PC

External

Port

Yes

User

Device

Is Video connected

?

Yes

No

Connect

206-4061

Quick Setup Guide

Installer RJP-110W/RJP-110WBR

Quick Setup Reference Guide

Following are the tasks associated with installing and setting up an

RJP-110W System.

1. Install RJP-110W in cabinet.

2. Make all hard wire connections to

RJP-110W, TV and any other in-room resources.

3. Plug all system components into power sources.

4. Adjust TV installer menu items 040 and 093 to enable RJP capability.

(See TV installation guide for complete instructions on new TV installations. The master TV setup can be modified to include RJP settings for multiple system installations.)

5. Test the system with user-type devices to assure TV sound/picture are as desired.

Typical TV Display Panel

Installer Menu

Item Description Set

CONTROL

AUDI

O OUT

R L

VIDEO OUT

RGB OUT

AL VIDEO OUT

DIGIT

6. Provide user information in room. (As applicable to your entertainment system.)

• RJP-110W Tent Card. (Or comparable equivalent from Lodge)

• RJP-110W Quick Reference Guide.

(Or comparable equivalent from

Lodge)

• An e the A xample o e h

C outlets r

Or, listen to th al en tertainm

Camcorder

.

e an d PC

RJP-110W

f usag gin en t n etwork an

, Cam cor e your cell ph t d evi ces lik g while you listen to a CD player an tertainm eport on TV

.

de o

, Laptop PC, Vi on e.

Remote Jack Pack (See other side)

MP3

Player

Digital

Camera ed in to

• Y ou can conn

Gam e Player or oth

DVD

Player

Game

Machine

PC

3.

2.

1.

DVI/PC

AUDIO

IN

PC IN

UPDATE

RS-232C

CONTROL NORMAL

(DTV)

DIGTAL AUDIO

OUT (OPTICAL)

AUDIO IN VIDEO 1 IN

AUDIO IN VIDEO 2 IN

RJP

INTERFACE FUTURE

USE

AC IN

Interface ence Guide

Multi-Media

Quick Refer

PC

Game

Machine

DVD

Player

Camcorder

Digital

Camera

MP3

Player

DIGIT

AL VIDEO IN

PC VIDEO IN

VIDEO IN

AUDIO IN

L

R

AUDIO IN

ST

RE

otel. at this h

7 AMP MAXIMUM CURRENT

ay n ot be available

.

ons sh e available ecti on opti esour ces ar

Please ch ulti-m edia conn e hotel to confirm what r

Remote

RJP-110W

Hotel Guest Multi-Media

al au dio, vi deo ovid ed to conn ect person d oth er en

, ter-

.

e LG Rem ote J ack P and PC d evices to h ack is pr ear an deo Gam one, e Player an s, co d watch TV

• As

shown on th

Cam cord ot conn ge your cell ph ryers g iron ces to th e four A ect hair d

CAUTION:

other similar hi provi ded.

The m gh-curr axim um load f

How to U

• Plug your d

• Conn ect th

• Listen to au devi on your laptop PC. Th tion s.) deo fr om th e in-r e sam e devi age on th ce. (See oth and displays your laptop PC’s im audi o/vi e devi dio fr d in dio/vi e devi om on ce an e of deo output to th er si our A e m e TV’s scr edia in om a differ

.

terface

.

re typi cally conn ecde f or available

Standard

120 Volt

60Hz AC

Power

Outlet

206-4061-A

1 9

RJP-110W Warranty

Remote Jack Pack Welcome to the LG family! We believe that you will be pleased with your new LG product.

Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law.

This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A.

LG’S RESPONSIBILITY

Service Labor

During a period of one year from effective warranty date, LG will replace a defective unit, as determined by the LG service center, as a result of manufacturing defects.

Replacement

New or remanufactured replacements for factory-defective units will be supplied by an LG authorized service center for one year from effective warranty date. Such replacement unit is warranted for the remaining portion of the original warranty period.

Warranty Service

Warranty service is provided call 1-888-865-3026 for further information.

Not Covered

This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems, cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes beyond the control of LG. Any alteration of the product after manufacture voids this warranty in its entirety.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-

LAR PURPOSE, AND LG SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR

INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNEC-

TION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-

QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO

YOU.

OWNER’S RESPONSIBILITY

Effective

Warranty begins on the date of installation of the RJP-110W Multi-Media Interface.

Warranty Date For your convenience, keep the dealer’s dated bill of sale or delivery ticket as evidence of the purchase date.

Installation

Read the Installation and Setup Guide carefully so that you will understand the functions of

Guide

the RJP-110W and how to make adjustments.

Antenna

Reception problems caused by inadequate antenna or faulty antenna connections are the owner’s responsibility.

Audio Output

Audio problems caused by inadequate audio devices or audio material with sound level lapses are not within the control of LG and therefore are the owner’s responsibility.

Warranty Service For warranty service information, call 1-888-865-3026.

- A replacement unit that is LG’s responsibility (see above) will be provided without charge.

Other service is at the owner’s expense.

- If you have any problem in obtaining satisfactory warranty service, call 1-888-865-3026.

- You must provide the model number, serial number and date of purchase or date of original installation.

- Before you ask for warranty service, reread this guide. You might avoid a service call.

For Customer Support/Service please call: 1-888-865-3026 www.lgcommercial.com

LG Electronics U.S.A., Inc.

2000 Millbrook Drive, Lincolnshire, IL 60069

206-4061

Issue-A