Compaq | ProLiant BL35p | HP ProLiant BL35p Server Blade - Hewlett

HP ProLiant BL35p Server Blade - Hewlett
QuickSpecs
HP ProLiant BL35p Server Blade
Overview
1.
2.
3.
4.
Up to two optional small form factor non-hot pluggable ATA or SAS hard disk drives
Up to 16 GB of memory (using optional PC2700 DDR SDRAM)
Mezzanine Card: Internal 4 Port SAS HBA (SAS models only) or optional Dual-Port Fibre Channel Adapter
Up to two Dual-Core AMD® Opteron™ 200 Series processors
What's New
The ProLiant BL35p server blade now supports two non-hot plug serial attached SCSI (SAS) hard disk drives to deliver even greater
performance and reliability within the same ultra-dense form factor and power envelope.
Support for two internal small form factor serial attached SCSI (SAS) hard disk drives
Non-hot pluggable
36-GB or 72-GB hard disk drive options
Hardware RAID 0 or 1 support
At A Glance
This document covers the HP ProLiant BL35p server blade only. For more information on HP BladeSystems p-Class Infrastructure
and HP BladeSystem p-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem p-Class Infrastructure: http://h18000.www1.hp.com/products/quickspecs/12330_div/12330_div.HTML
HP BladeSystem p-Class Interconnect Components:
http://h18000.www1.hp.com/products/quickspecs/12331_div/12331_div.HTML
Up to two Dual-Core AMD® Opteron™ 200 Series processors running at 2.2 GHz, 2.0 GHz, and 1.8 GHz with 1MB L2
cache per core and 1GHz HyperTransport (lower CPU power rating per processor: 68 watt)
AMD® Opteron™ 8000 series chipset
1024 MB (2 x 512 MB) or 2048 MB (4 x 512 MB) PC3200 DDR 400 MHz memory, expandable to 8 GB (using optional
PC3200 DDR SDRAM) or 16 GB max (using optional PC2700 DDR SDRAM)
Integrated Lights-Out (iLO) Advanced Pack with static IP bay configuration and HP BladeSystem wizard features
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card)
One 10/100T NIC (embedded) dedicated to iLO management
Supports up to two optional small form factor serial attached SCSI (SAS) 72-GB non-hot plug hard drives or two optional
small form factor ATA 60-GB non-hot plug hard drives
Internal 4 Port SAS HBA (on a mezzanine card) supports RAID 0 or 1
BIOS-Enhanced RAID for Linux enables both primary and secondary hard drives to be bootable
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 1
QuickSpecs
HP ProLiant BL35p Server Blade
Overview
Dual-Port Fibre Channel Adapter (2Gb) option for SAN connectivity
HP ProLiant BL35p server blade plugs vertically into HP BladeSystem p-Class Blade Sleeve; sleeve plugs into 6U blade
enclosure
Local I/O cable provides two USB ports, one video port, one iLO port and serial port
Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and
Common Procedures guides
Up to 96 HP ProLiant BL35p server blades fit in 42U rack in non-redundant power configuration; up to 80 HP ProLiant BL35p
server blades fit in 42U in full power redundant configuration
Protected by HP Services and a worldwide network of resellers and service providers. Three-year parts, 1 year labor and 1
year on-site limited global warranty. Certain restrictions and exclusions apply. Pre-Failure Notification on processors, memory,
and SCSI hard drives.
All ATA hard drives offered by HP carry a one year warranty regardless of the base system in which they are installed
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 2
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Server Blade)
Processors
Single-Core AMD® Opteron™ processor Model 250 (2.4 GHz/1MB L2 cache/800MHz
HyperTransport, 68 Watts)
Dual-Core AMD Opteron™ processor Model 275 (2.2 GHz/1MB L2 cache/1 GHz HyperTransport, 68
Watts)
Dual-Core AMD Opteron™ processor Model 270 (2.0 GHz/1MB L2 cache/1 GHz HyperTransport, 68
Watts)
Dual-Core AMD Opteron™ processor Model 265 (1.8 GHz/1MB L2 cache/1 GHz HyperTransport, 68
Watts)
Upgradeability
Upgradeable to dual processing
Cache Memory
1MB Level 2 Cache per core
2MB total for Dual-Core models
Chipset
AMD® Opteron™ 8000 series chipset
Memory
One of the following
depending upon model
Type
Standard
PC3200 DDR 400 MHz (2 slots) 2:1 interleave
1024 MB
(2 x 512 MB)
2048 MB
(4 x 512 MB)
Maximum
16 GB max (using optional 333 MHz PC2700 DDR SDRAM)
8 GB max (using optional 400 MHz PC3200 DDR SDRAM)
NOTE: Memory must be installed in pairs.
Network Adapter
Three (3) network adapters total:
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and PXE
One 10/100T NIC (embedded) dedicated to iLO management
Expansion Slots
No PCI slots; all features are integrated.
Two (2) USB 1.1 ports, one (1) video port, one (1) iLO port and one (1) serial port
Two (2) Local I/O cables ship with each server blade enclosure with enhanced backplane components
(281404-B22 and 243564-B22)
NOTE: Tested USB devices (keyboard, mouse, floppy) are listed in options section below.
Integrated Manageability Integrated Lights-Out (iLO) Management Advanced (ASIC on the system board)
Internal Storage
Hard Drives
Maximum Internal
Storage
120-GB (2 x 60-GB small form factor ATA, 5,400 rpm non-hot plug hard drives)
144-GB (2 x 72-GB small form factor SAS, 10,000 rpm non-hot plug hard drives)
DA - 12325
None ship standard
Worldwide — Version 4 — November 7, 2005
Page 3
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Server Blade)
Graphics
Integrated ATI Rage XL Video Controller with 8 MB SDRAM Video Memory
Graphics Resolution
Supported
Resolution Color Depths
Depths 1280 x 1024, 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fibre Channel on the HP Two optional fibre channel adapters are supported by the HP ProLiant BL35p. Both adapters are
ProLiant BL35p server
mezzanine circuit boards which connect directly to the server blade system board. These optional fiber
blade
channel adapters are available via option kits and must be ordered separately.
QLogic-based
Utilizes a QLogic ISP2312 chipset
The HP ProLiant BL35p Dual-Port Fibre Channel Adapter (P/N 354054-B21) is compatible
with the HP ProLiant BL35p and HP ProLiant BL30p server blades. It cannot be used with an
HP ProLiant BL20p, HP ProLiant BL25p, HP ProLiant BL35p SAS models, HP ProLiant
BL40p, or HP ProLiant BL45p server blade.
Includes two small form factor pluggable transceivers with LC connectors for installation
into the Patch Panel 2, CGESM or GbE2 Interconnect Switch (with the Storage Connectivity
Kit)
Emulex-based
Utilizes an Emulex Thor chipset
The Emulex-based FC Mezzanine for HP p-Class BladeSystem dual port Fibre Channel HBA
(P/N 394588-B21) is compatible with the HP ProLiant BL25p, BL30p, BL35p, and BL45p
server blades. It cannot be used with an HP ProLiant BL20p, HP ProLiant BL35p SAS model,
or HP ProLiant BL40p server blade as these devices take a different Emulex card.
Two ports on each Dual-port Fibre Channel Mezzanine Card provide a redundant Fibre Channel
connection to each server blade
Supports up to 2Gb/s Fibre Channel equipment
There are no SFP's included in the Emulex mezzanine kit for use with ProLiant BL p-Class Fibre
Channel pass-through interconnects. If you require SFPs for use with an Emulex mezzanine and a
FC pass through interconnect please order an SFP option kit (P/N 397577-B21) which will
provide 2 FC SFPs per option kit.
NOTE: Fibre Channel connectivity is not available on the HP ProLiant BL35p SAS models.
Compatible SAN
HP ProLiant BL35p server blades are optimized for StorageWorks arrays:
Modular Smart Array 1000, Enterprise Virtual Array 5000 (EVA5000) V2, Enterprise Virtual Array
3000 (EVA3000), XP48, 128, 512, 1024
HP ProLiant BL35p server blades are compatible with select 3rd party SANs. Please refer to blade
storage website for details: http://h18000.www1.hp.com/products/servers/proliant-bl/pclass/storage.html
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 4
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Manageability)
ProLiant Essentials
HP Systems Insight Manger HP Systems Insight Manager (HP SIM) help maximize system uptime and
Foundation Pack Software
performance and reduce system maintenance costs by providing proactive
for the ProLiant BL Server
notification of problems before those problems result in unplanned downtime
or reduced productivity. HP SIM is easy to set up to work with the Insight
Management Agents, integrated Light-Out and Remote Insight Light-Out
Edition, and Version Control Agents to deliver robust fault, configuration,
and asset management as well as remote administration. With HP Systems
Insight Manager customers will also be able to take advantage of role-based
security; the ability to manage ProLiant, Integrity, and HP9000 systems; and
plug-ins for storage, client, printer, and power management as well as server
rapid deployment, performance management, and workload management.
For more details on HP Systems Insight Manager visit
http://www.hp.com/go/hpsim.
ProLiant Essentials Rapid Rapid Deployment Pack (RDP) is an automated deployment and provisioning
Deployment Pack
solution for all ProLiant servers. RDP includes the Altiris Deployment Solution
and ProLiant Integration Module featuring ProLiant server pre-configured
events for OS installation, and optimized software drivers, firmware and
management agents. Every RDP CD includes 10-node trial licenses for
evaluation purposes. RDP requires a license for each server deployed and is
available for purchase with blade servers. For more information, visit
http://www.hp.com/servers/rdp.
Management Agents
The Management Agents form the foundation for HP's Intelligent
Manageability strategy. They provide direct, browser-based access to indepth instrumentation built into HP servers, workstations, desktops, and
portables, and send alerts to HP Systems Insight Manager and other
enterprise management applications in case of subsystem or environmental
failures. For additional information about the Management Agents and other
management products from HP, please visit the management Web site at
http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ROMPaq, support
The latest software, drivers, and firmware fully optimized and tested for your
software, and
ProLiant server and options, available in the RDP CD, SmartStart or
configuration utilities
downloadable from Software and Drivers download pages, linked from the
SmartStart website at http://www.hp.com/servers/smartstart.
Insight Diagnostics Online The most advanced configuration analysis, reporting and troubleshooting
Edition
utilities used by HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
http://www.hp.com/servers/proliantessentials
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 5
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Manageability)
Optional ProLiant
Essentials Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to
address specific business problems and needs:
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages
and steers traffic to the optimum route based on network conditions, plus it provides an extra layer
of protection. The virus throttle feature of the solution slows the propagation of fast spreading virus
Performance Management Pack - identifies and explains hardware performance bottlenecks on
ProLiant servers and attached options enabling users to better utilize their valuable resources.
Virtualization Management Software - Get the most out of server virtualization by unifying the
management of physical and virtual servers in HP Systems Insight Manager. The Virtual Machine
Management Pack plug-in provides central management and control of VMware and Microsoft
virtual machines and provides physical host to virtual machine association. The Server Migration
Pack plug-in automates the manual task of migrating servers between physical or virtual
platforms.
Vulnerability and Patch Management Pack - integrates comprehensive vulnerability assessment
and advanced patch management functions into HP Systems Insight Manager, to identify and
resolve security vulnerabilities quickly, efficiently, and reliably.
Workload Management Pack - provides easier management of complex environments, improving
overall server utilization and enabling customers for the first time to confidently deploy multiple
applications on a single multiprocessor ProLiant Server.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer
to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product
QuickSpecs for more information.
SmartStart
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and
consistent server configurations. To obtain a copy of SmartStart for your blade server, redeem the
coupon that is included with your Blade server or order your copy from the SmartStart web site. For more
information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.20
OS Support:
Single-Core
Microsoft Windows 2000 Server
Microsoft Windows 2000 Advanced Server
Windows Server 2003, Web Edition
Windows Server 2003, Standard Edition
Windows Server 2003, Enterprise Edition
Red Hat Enterprise Linux 3
Red Hat Enterprise Linux 4
SuSE Linux Enterprise Server 8
SuSE Linux Enterprise Server 9
NOTE: For a complete and up-to-date listing of supported OSs and versions, please visit our OS
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant BL35p, please see:
http://h18023.www1.hp.com/support/files/server/us/family/model/6067.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web
site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
2.4 GHz model
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 6
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Manageability)
OS Support:
Dual-Core
1.8 GHz, 2.0 GHz, and
2.2 GHz models
Supported Software
Offerings
Microsoft Windows 2000 Server (licensed by core)
Microsoft Windows 2000 Advanced Server (licensed by core)
Windows Server 2003, Standard Edition
Windows Server 2003, Enterprise Edition
Red Hat Enterprise Linux 3 Update 5
Red Hat Enterprise Linux 4 Update 2
SuSE Linux Enterprise Server 9 SP1
NOTE: For a complete and up-to-date listing of supported OSs and versions, please visit our OS
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see:
http://h18023.www1.hp.com/support/files/server/us/family/model/6067.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web
site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html
VMware Virtualization Software
Red Hat Enterprise Linux and management bundle for HP BladeSystems
NOTE: For more information on HP Certified and Supported HP ProLiant Servers, please visit the
VMware Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
NOTE: For a more complete and up-to-date information on Linux for HP BladeSystems support, please
visit HP Linux website at:
http://h18000.www1.hp.com/products/quickspecs/12321_div/12321_div.HTML
Intelligent Manageability Integrated Lights-Out (iLO) Advanced Pack
HP BladeSystem wizard - blade and OS installation and configuration
Static IP bay configuration
Virtual Text and Graphical Remote Console
Virtual CD-ROM and Virtual Floppy
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
NOTE: For more information on iLO Advanced visit the website: http://www.hp.com/servers/ilo/
Automatic Server Recovery-2 (ASR-2)
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server and Interconnect Switch Health Logs
Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as SCSI hard drives and memory)
Integrated Management Log (IML)
Network adapter teaming set-up utility
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 7
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Manageability)
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connections Redundant ROM on each
server blade ECC Memory Network adapter teaming (network fault tolerance, transmit load balancing,
switch-assisted load balancing)
Security
Power-on password
Administrator's password
Integrated Lights-Out provides user authentication via directory services or 12 customizable user
accounts
Integration Lights-Out supports SSH and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to http://www.hp.com/go/factory-express.
Service and Support
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of resellers and service providers. Hardware diagnostic support and repair is available for three
years from date of purchase. Support for software and initial setup is available for 90 days from date of
purchase. Additional support may be covered under the warranty or available for an additional fee.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements.
NOTE: Server Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. This
warranty supports the HP ProLiant BL20p, HP ProLiant BL25p, HP ProLiant BL40p and HP ProLiant
BL45p Server Blades.
NOTE: Server Blade Limited Warranty includes 3 year Parts, 1 year Labor, 1-year on-site support. This
warranty supports the HP ProLiant BL30p and HP ProLiant BL35p Server Blades.
NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support.
NOTE: Server Blade Interconnect Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support
NOTE: ATA drives have a 1 year warranty.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7
days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and
VMware-based IT solutions helping to deliver high level of application availability. Response times
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 8
QuickSpecs
HP ProLiant BL35p Server Blade
Standard Features (Manageability)
range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP has introduced a new building block approach which allows customers to purchase the right
coverage at the right time whether purchasing an initial server blade plus enclosure or purchasing
additional ProLiant server blades over time. HP will offer two sets of Care Pack services, one designed to
support the server blade and one designed to support the enclosure.
HP Care Pack services for HP ProLiant Server Blades cover the server blade and all HP branded
hardware options qualified for the server, purchased at the same time or afterwards, internal to the
server.
HP Care Pack services for HP BladeSystem p-Class Server Blade Enclosure covers the enclosure
including patch panels, HP supported Ethernet interconnects, power enclosure with power supplies and
power distribution.
NOTE: For more information regarding the Blade service portfolio visit our worldwide web site on the
internet at: http://h20219.www2.hp.com/services/cache/81725-0-0-225-121.html
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or
resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us
at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 9
QuickSpecs
HP ProLiant BL35p Server Blade
Models
Dual-Core Models
ProLiant BL35p 2.2GHz- Processor(s)
1MB, DC, 2GB, SAS (2P)
395222-B21
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
ProLiant BL35p 1.8GHz- Processor(s)
1MB, DC, 1GB, SAS (1P)
394876-B21
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12325
Two (2) Dual-Core AMD Opteron™ 200 Series processors Model 275 2.2
GHz (68 Watts) standard
1MB Level 2 writeback per core
2048 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
Internal 4 Port SAS HBA (on a mezzanine card) supports RAID 0 or 1
None ship standard
Up to 144-GB maximum (with optional non-hot plug SAS hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
One (1) Dual-Core AMD Opteron™ processor Model 265 1.8 GHz (68
Watts) standard (up to 2 supported)
1MB Level 2 writeback per core
1024 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
Internal 4 Port SAS HBA (on a mezzanine card) supports RAID 0 or 1
None ship standard
Up to 144-GB maximum (with optional non-hot plug SAS hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Worldwide — Version 4 — November 7, 2005
Page 10
QuickSpecs
HP ProLiant BL35p Server Blade
Models
ProLiant BL35p 2.2GHz- Processor(s)
1MB, DC, 2GB (2P)
392446-B21
Cache Memory
Memory
Network Adapter
Hard Drives
Internal Storage
Optical Drive
Form Factor
ProLiant BL35p 2.0GHz- Processor(s)
1MB, DC, 2GB (2P)
392448-B21
Cache Memory
Memory
Network Adapter
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12325
Two (2) Dual-Core AMD Opteron™ processors Model 275 2.2 GHz (68
Watts) standard
1MB Level 2 writeback per core
2048 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Two (2) Dual-Core AMD Opteron™ processors Model 270 2.0 GHz (68
Watts) standard
1MB Level 2 writeback per core
2048 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Worldwide — Version 4 — November 7, 2005
Page 11
QuickSpecs
HP ProLiant BL35p Server Blade
Models
ProLiant BL35p 1.8GHz- Processor(s)
1MB, DC, 1GB (1P)
392450-B21
Cache Memory
Memory
Network Adapter
Hard Drives
Internal Storage
Optical Drive
Form Factor
One (1) Dual-Core AMD Opteron™ processor Model 265 1.8 GHz (68
Watts) standard (up to 2 supported)
1MB Level 2 writeback per core
1024 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Single-Core Models
ProLiant BL35p 2.4GHz- Processor(s)
1MB, 1GB (1P)
374211-B21
Cache Memory
Memory
Network Adapter
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12325
One (1) Single-Core AMD Opteron™ processor Model 250 2.4 GHz (68
Watts) standard (up to 2 supported)
1MB Level 2 writeback per processor
1024 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Worldwide — Version 4 — November 7, 2005
Page 12
QuickSpecs
HP ProLiant BL35p Server Blade
Models
ProLiant BL35p 2.4GHz - Processor(s)
1MB, 2GB (2P)
374212-B21
Cache Memory
Memory
Network Adapter
Hard Drives
Internal Storage
Optical Drive
Form Factor
ProLiant BL35p 2.4GHz- Processor(s)
1M, 2GB (2P) Server
Blade Multi-Pack
Cache Memory
374214-B21
Memory
NOTE: Multi-pack
contains 8 HP ProLiant
BL35p server blades, 4 HP
Network Adapter
BladeSystem p-Class
Blade Sleeves and 8
licenses for Rapid
Deployment Pack.
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12325
Two (2) Single-Core AMD Opteron™ processors Model 250 2.4 GHz (68
Watts) standard
1MB Level 2 writeback per processor
2048 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Two (2) Single-Core AMD Opteron™ processors Model 250 2.4 GHz (68
Watts) standard
1MB Level 2 writeback per processor
2048 MB (standard) of PC3200 DDR SDRAM 400 MHz
8 GB (maximum) of PC3200 DDR SDRAM 400 MHz
16 GB (maximum) of PC2700 DDR SDRAM 333 MHz
2-way interleaved, 4 DIMM slots
Two (2) NC7781 PCI-X Gigabit NICs (on a mezzanine card) with WOL and
PXE
One (1) 10/100T NIC (embedded) dedicated to iLO management
None ship standard
Up to 120-GB maximum (with optional non-hot plug ATA hard drives)
None
Plugs vertically into HP BladeSystem p-Class Blade Sleeve. Blade sleeve
supports 1 or 2 BL30p and BL35p blades, or any combination of BL30p and
BL35p blades. Blade sleeve plugs vertically into HP BladeSystem p-Class
Enhanced Server Blade Enclosure
Worldwide — Version 4 — November 7, 2005
Page 13
QuickSpecs
HP ProLiant BL35p Server Blade
Configuration Information - Factory Integrated Models (North America only)
NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
Step 1: Base Server Blade Configuration
Model
HP ProLiant BL35p Configurable Model CTO Blade
Factory Integrated Model ships with:
- One embedded 10/100T NIC for iLO
- Integrated Lights-Out (iLO) Management with Advanced Pack features
HP ProLiant BL35p SAS Configurable Model CTO Blade
Factory Integrated Model ships with:
- Internal 4 Port SAS HBA (on a mezzanine card)
- One embedded 10/100T NIC for iLO
- Integrated Lights-Out (iLO) Management with Advanced Pack features
NOTE: HP ProLiant BL35p SAS Configurable Model CTO Blade (P/N 398605-405)
does not support single-core processors.
382734-405
398605-405
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processor
Dual-Core AMD Opteron™ Model 275 2.2 GHz/68W FIO ALL
NOTE: If dual processor configurations are desired, select one 392447-L21 and one
392447-B21.
Dual-Core AMD Opteron™ Model 270 2.0 GHz/68W FIO ALL
NOTE: If dual processor configurations are desired, select one 392449-L21 and one
392449-B21.
Dual-Core AMD Opteron™ Model 265 1.8 GHz/68W FIO ALL
NOTE: If dual processor configurations are desired, select one 392451-L21 and one
392451-B21.
Single-Core AMD Opteron™ Model 250 2.4 GHz/68W FIO ALL
NOTE: If dual processor configurations are desired, select one 381883-L21 and one
381883-B21.
DA - 12325
Worldwide — Version 4 — November 7, 2005
392447-L21
392449-L21
392451-L21
381883-L21
Page 14
QuickSpecs
HP ProLiant BL35p Server Blade
Configuration Information - Factory Integrated Models (North America only)
Memory
Communications
NOTE: Must select one
For 1 GB Total Memory:
1 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
For 2 GB Total Memory, choose A or B:
A) 2 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 1024 MB)
B) 2 x 1 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
For 4 GB Total Memory, choose A or B:
A) 4 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 2048 MB)
B) 2 x 2 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 1024 MB)
For 8 GB Total Memory, choose A or B:
A) 8 GB PC2700 DDR SDRAM DIMM Memory Kit (2 x 4096 MB)
B) 2 x 4 GB PC3200 DDR SDRAM DIMM Memory Kit (2 x 2048 MB)
For 16 GB Total Memory:
2 x 8 GB PC2700 DDR SDRAM DIMM Memory Kit (2 x 4096 MB)
NOTE: Two-way interleaving memory is enabled when an identical pair of DIMMs is
installed.
NOTE: Maximum performance in a two processor (2P) server blade is achieved when
Option B memory configurations are utilized.
HP ProLiant BL25/35/45p NIC Mezz FIO Base
Or upgrade to:
HP ProLiant BL25p/35p/45p Dual NC370i Multifunction Network Adapter
NOTE: The HP BladeSystem Multifunction iSCSI and RDMA features are not currently
supported in a Linux environment. Future support is planned.
NOTE: 2 GB minimum memory configuration is required for Multifunction Network
Adapter support.
376638-B21
376639-B21
376638-B21
379300-B21
376639-B21
395409-B21
379300-B21
395409-B21
382850-B21
384043-B21
Step 3: Choose Additional Options for Factory Integration
Hard Drive
SAS - Universal Hard Drive
36-GB SAS 10,000 rpm Hard Drive (2.5")
72-GB SAS 10,000 rpm Hard Drive (2.5")
NOTE: Supported on SAS models only
ATA Non-Hot Plug
60-GB ATA 5,400 rpm Hard Drive (2.5")
DA - 12325
Worldwide — Version 4 — November 7, 2005
384038-B21
384141-B21
354052-B21
Page 15
QuickSpecs
HP ProLiant BL35p Server Blade
Configuration Information - Factory Integrated Models (North America only)
Fibre Channel Option
Emulex-based BL25/30/35/45p Dual Port Fibre Channel HBA
NOTE: SFPs for use with pass through SAN switches not included with the Emulexbased Fibre Channel Mezzanine card. If SFPs required please order the SFP option kit
(P/N 397577-B21) which includes 2 2Gb SFPs per option kit.
HP 2-2Gb SFP for Fibre Channel pass through kit
NOTE: Must select if SFP for use with pass through SAN switches is required when
ordering Emulex-based Fibre Channel Mezzanine card for HP p-Class BladeSystem
(p/N 394757-B21.
BL30p/BL35p Dual Port Fibre Channel Adapter
NOTE: The BL30p/BL35p Dual Port Fibre Channel Adapter is QLogic based.
NOTE: For additional options, including HP BladeSystem p-Class blade sleeves,
enhanced server blade enclosure, interconnect options and power subsystem options
please refer to the "Options" section below.
NOTE: Fibre Channel connectivity is not available on the HP ProLiant BL35p SAS
model (P/N 398605-405).
DA - 12325
Worldwide — Version 4 — November 7, 2005
394588-B21
397577-B21
354054-B21
Page 16
QuickSpecs
HP ProLiant BL35p Server Blade
Options
NOTE: Some options may not be factory integratable. Please contact your local sales representative for
additional information.
HP BladeSystem p-Class Blade Sleeve Kit
Unique Options
NOTE: Each blade sleeve supports one or two HP ProLiant BL30p/HP ProLiant BL35p
server blades. HP ProLiant BL30p and BL35p server blades may be mixed within the
blade sleeve.
ProLiant Essentials Value ProLiant Essentials Intelligent Networking Pack Windows Edition and Linux Edition
Pack Software
ProLiant Essentials Intelligent Networking Pack Windows Edition, Single Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
ProLiant Essentials Intelligent Networking Pack Linux Edition, Single Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
NOTE: For additional ProLiant Intelligent Networking Pack License Kits please see the
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12062_div/12062_div.HTML
http://h18000.www1.hp.com/products/quickspecs/12327_div/12327_div.HTML
ProLiant Essentials Performance Management Pack
ProLiant Essentials Performance Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key, HP Management CD and documentation.
NOTE: The most recent version of the software can always be downloaded at
http://www.hp.com/products/pmp.
NOTE: For additional ProLiant Performance Management Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11925_div/11925_div.HTML
ProLiant Essentials Rapid Deployment Pack Windows Edition and Linux Edition
Release
Rapid Deployment Pack, Single-Server License
NOTE: This license allows 1 server to be deployed and managed via RDP.
Rapid Deployment Pack, Single-Server License (Japan)
NOTE: This license allows 1 server to be deployed and managed via RDP.
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.HTML
http://h18000.www1.hp.com/products/quickspecs/11713_div/11713_div.HTML
ProLiant Essentials Server Migration Pack
ProLiant Essentials Server Migration Pack, Single-Migration License
NOTE: Contains one license, enabling 1 server migration, with a unique license
activation key and documentation.
NOTE: This license allows 1 server to be migrated from a physical server to a virtual
machine. Or this license can be used to migrate a virtual machine from one
virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware
ESX or Microsoft Virtual Server 2005.
NOTE: For additional ProLiant Server Migration Pack License Kits please see the
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML
DA - 12325
Worldwide — Version 4 — November 7, 2005
354101-B21
372906-B21
397004-B21
306696-B21
267196-B21
267196-291
375345-B21
Page 17
QuickSpecs
HP ProLiant BL35p Server Blade
Options
ProLiant Essentials Workload Management Pack
ProLiant Essentials Workload Management Pack, Single Server License
NOTE: For additional ProLiant Workload Management Pack License Kits please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11452_div/11452_div.HTML
ProLiant Essentials Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
NOTE: For additional ProLiant Virtual Machine Management Pack License Kits please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML
ProLiant Essentials Vulnerability and Patch Management Pack
Processor
Memory
303284-B21
372214-B21
ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
NOTE: For additional ProLiant Vulnerability and Patch Management Pack License
Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12111_div/12111_div.HTML
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various
ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.hp.com/servers/proliantessentials.
371645-B21
Dual-Core AMD Opteron™ processor Model 275 2.2 GHz/1M/68W Processor
Option Kit
Dual-Core AMD Opteron™ processor Model 270 2.0 GHz/1M/68W Processor
Option Kit
Dual-Core AMD Opteron™ processor Model 265 1.8 GHz/1M/68W Processor
Option Kit
Single-Core AMD Opteron™ processor Model 250 2.4 GHz/1M/68W Processor
Option Kit
392447-B21
8 GB Advanced ECC PC2700 DDR-333 SDRAM DIMM Memory Kit
(2 x 4-GB)
4 GB Advanced ECC PC3200 DDR-400 SDRAM DIMM Memory Kit
(2 x 2-GB)
2 GB Advanced ECC PC3200 DDR-400 SDRAM DIMM Memory Kit
(2 x 1-GB)
1 GB Advanced ECC PC3200 DDR-400 SDRAM DIMM Memory Kit
(2 x 512 MB)
395409-B21
DA - 12325
Worldwide — Version 4 — November 7, 2005
392449-B21
392451-B21
381883-B21
379300-B21
376639-B21
376638-B21
Page 18
QuickSpecs
HP ProLiant BL35p Server Blade
Options
Hard Drive
Communications
SAS - Universal Hard Drive
36-GB SAS 10,000 rpm Hard Drive (2.5")
72-GB SAS 10,000 rpm Hard Drive (2.5")
NOTE: Supported on SAS models only
ATA Non-Hot Plug
60-GB ATA 5,400 rpm Hard Drive (2.5")
Multifunction NIC with support for iSCSI, RDMA, TOE:
HP ProLiant BL25p/35p/45p Dual NC370i Multifunction Network Adapter
NOTE: The HP BladeSystem Multifunction iSCSI and RDMA features are not currently
supported in a Linux environment. Future support is planned.
NOTE: 2 GB minimum memory configuration is required for Multifunction Network
Adapter support.
384038-B21
384141-B21
354052-B21
384043-B21
ProLiant BL30p/BL35p
Fibre Channel Adapter
Emulex-based BL25/30/35/45p Dual Port Fibre Channel HBA
Dual-Port Fibre Channel Adapter (2Gb) Kit (option) for HP ProLiant BL30p or HP
ProLiant BL35p server blades
NOTE: This Fibre-Channel adapter is QLogic-based
NOTE: When using this adapter, Patch Panel 2, CGESM, or a GbE2 Interconnect
Switch Kit (with Storage Connectivity Kit) must be used to provide pass through of the
Fibre Channel signals.
NOTE: For additional information on HP Interconnect Kits please visit:
http://h18000.www1.hp.com/products/quickspecs/12331_div/12331_div.HTML
NOTE: Fibre Channel connectivity is not available on the HP ProLiant BL35p SAS
models.
394588-B21
354054-B21
HP BladeSystem p-Class
Other Options
HP BladeSystem p-Class Diagnostic Station
NOTE: The Diagnostic Station allows access to the HP ProLiant p-Class server blades
and the BL p-Class interconnect switch outside of the server blade enclosure. The
option provides power and a data interface so that "offline" upgrade and diagnostic
functions may be performed.
230743-B21
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 19
QuickSpecs
HP ProLiant BL35p Server Blade
Options
Tape Libraries
HP StorageWorks MSL6000 Tape Library
Ultrium 960 technology
MSL6030, 1 drive, 30 slots, Ultrium 960
MSL6030, 1 drive, 30 slots, Ultrium 960, with embedded FC router
MSL6060, 2 drive, 60 slots, Ultrium 960
MSL6060, 2 drive, 60 slots, Ultrium 960, with embedded FC router
SDLT 600 technology
MSL6052, 2 drive, 52 slots, SDLT 600
MSL6052, 2 drive, 52 slots, SDLT 600, with embedded FC router
Ultrium 460 technology
MSL6030, 1 drive, 30 slots, Ultrium 460
MSL6030, 1 drive, 30 slots, Ultrium 460, with embedded FC router
MSL6060, 2 drive, 60 slot Ultrium 460, with embedded FC router
NOTE: Please reference the MSL6000 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a
complete solution; reference current compatibility information at
http://www.hp.com/go/ebs
HP StorageWorks Virtual Library Systems
HP 6105 Virtual Library System
HP 6510 Virtual Library System
HP 6840 Virtual Library System
NOTE: Please reference the Virtual Library Systems QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a
complete solution. Reference current compatibility information at
http://www.hp.com/go/ebs
Magneto-Optical
Jukeboxes
AD606A
AD608A
AD607A
AD609A
AD587A
AD588A
AD598A
AD600A
AD601A
AF728A
AF729A
AG051A
HP StorageWorks 9.1-GB Optical Jukeboxes
600mx, 4 drive, 64 slot jukebox
1200mx, 4 drive, up to 128 slots
2200mx, 6 drive, up to 238 slots
NOTE: Please see the HP StorageWorks Magneto-Optical Products data sheet for a
complete listing of available jukeboxes at:
http://www.hp.com/products1/storage/products/archivalprod/brochures/
MO_family_pb.pdf
NOTE: Please reference the Magneto-Optical Jukebox data sheets at
http://www.hp.com/go/optical for additional information needed to create a
complete solution
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs at
http://www.hp.com/go/optical for additional information needed to create a
complete solution
DA - 12325
Worldwide — Version 4 — November 7, 2005
C1160M
C1104M
C1107M
Page 20
QuickSpecs
HP ProLiant BL35p Server Blade
Options
Ultra Density Optical
Jukeboxes
1900ux, 4 drive, 64 slot jukebox
3800ux, 4 drive, 128 slot jukebox
7100ux, 6 drive, 238 slot jukebox
NOTE: Please see the HP StorageWorks Ultra Density Optical Jukeboxes QuickSpecs
for a complete listing of available jukeboxes at:
http://h18006.www1.hp.com/products/quickspecs/11944_div/11944_div.html
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs at
http://www.hp.com/go/optical for additional information needed to create a
complete solution
HP StorageWorks
Modular Smart Array
1000
HP StorageWorks Modular Smart Array 1000
NOTE: Please see the StorageWorks Modular Smart Array 1000 QuickSpecs for
additional options and configuration information at:
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML
(North America)
http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML
(Worldwide)
201723-B22
Cluster Options
ProLiant Cluster Kit with OpenView Storage Mirroring
ProLiant Cluster HA/F200 for the Entry Level SAN
ProLiant Cluster HA/F200 for the Entry Level SAN
NOTE: For additional information regarding the ProLiant Cluster for HA/F100,
HA/F200 for Modular Smart Array 1000 please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11035_na/11035_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11035_div/11035_div.html
(Worldwide)
ProLiant Cluster Starter kit
NOTE: For additional information regarding the HP ProLiant Cluster for ProLiant
Cluster HA/F500 for Enterprise Virtual Array please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11055_na/11055_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11055_div/11055_div.html
(Worldwide)
NOTE: For additional information regarding the HP ProLiant Cluster for HA/F500
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10232_na/10232_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/10232_div/10232_div.html
(Worldwide)
364025-B21
364026-B22
364026-292
USB Options
USB 1.44-MB External Diskette Drive (Carbonite)
USB Optical Scroll Mouse (Carbonite)
DA - 12325
Worldwide — Version 4 — November 7, 2005
AA966A
AA969A
AA971A
364023-B21
DC141B
DD441B
Page 21
QuickSpecs
HP ProLiant BL35p Server Blade
Options
HP Rack 5000 Series
(Graphite Metallic)
HP 5642 Rack - Unassembled
358254-B21
Rack Options for
Rack 5000 Series
(Graphite Metallic)
Stabilizer kit for 5642 Rack (Graphite Carbon)
NOTE: The stabilizing kit is used to prevent rack from tipping over
Baying Kit for 5642 Rack (Graphite Carbon)
NOTE: The baying kit is used to join two or more HP5642 racks.
374493-B21
Rack 10000 Series
(Graphite Metallic)
HP Rack 10842 (42U) - Pallet
NOTE: Server Blade Enclosures must be field integrated into the 10842 racks. Factory
integration of Server Blade Enclosures into the 10842 is not supported
HP Rack 10842 (42U) - Shock Pallet
NOTE: Server Blade Enclosures must be field integrated into the 10842 racks. Factory
integration of Server Blade Enclosures into the 10842 is not supported
HP S10614 (14U) Rack Cabinet - Shock Pallet
HP Rack 10647 (47U) Cabinet - Pallet
HP Rack 10647 (47U) Cabinet - Crated
HP Rack 10642 (42U) Cabinet - Pallet
HP Rack 10642 (42U) Cabinet - Shock Pallet
HP Rack 10642 (42U) Cabinet - Crated
HP Rack 10636 (36U) Cabinet - Pallet
HP Rack 10636 (36U) Cabinet - Shock Pallet
HP Rack 10636 (36U) Cabinet - Crate
HP Rack 10622 (22U) Cabinet - Pallet
HP Rack 10622 (22U) Cabinet - Shock Pallet
HP Rack 10622 (22U) Cabinet - Crated
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems,
VARs and Channels)
-B23 (crated) used for air shipments of empty racks
Not all HP equipment is qualified to be shipped in the Rack 10000 series.
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as
height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.HTML
(Worldwide)
http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML
(North America)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rackoptions/index.html
257415-B21
DA - 12325
Worldwide — Version 4 — November 7, 2005
374499-B21
257415-B22
292302-B22
245160-B21
245160-B23
245161-B21
245161-B22
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
Page 22
QuickSpecs
HP ProLiant BL35p Server Blade
Options
Rack Options for HP
Rack 10000 Series
HP Rack Plinth Kit (Carbon)
HP Rack Light Kit (Neon)
42U Side Panel – Graphite Metallic
36U Side Panel – Graphite Metallic
47U Side Panel – Graphite Metallic
Zero drive 3U Rackmount Enclosure
5U Rackmount Kit All
NOTE: For additional information regarding Rack Options, please see the following
URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rackoptions/index.html.
TFT7210R Rack Mounted 17" Monitor
TFT5600 Rack Keyboard Monitor
1U Rack Keyboard & Drawer (Carbon)
Country Code Key (for TFT5600 RKM Rack Keyboard Monitor
(PN 221546-xx1) and 1U Rack Keyboard & Drawer (Carbon) (P/N 257054-xx1))
XX = 00
XX = 03
XX = 04
XX = 05
XX = 06
XX = 07
XX = 08
US
UK
Germany
France
Italy
Spain
Denmark
XX = 09
XX = 10
XX = 11
XX = 13
XX = 18
XX = 29
XX = B3
251960-B21
361589-B21
246099-B21
246102-B21
255486-B21
2T-27433-02
274339-B21
348373-B21
221546-xx1
257054-xx1
Norway
Sweden/Finland
Switzerland
Portugal
Belgium
Japan
International
NOTE: For additional information regarding Rack Options, please see the following
URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rackoptions/index.html
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/
HP KVM Switch Options
HP BladeSystem Cat 5 KVM Interface Adapter
HP 1x1x16 IP Console Switch
HP 3x1x16 IP Console Switch
HP 0x1x8 Server Console Switch
HP 0x2x16 Server Console Switch
PS/2 Interface Adapter, 1-pack
PS/2 Interface Adapter, 8-pack
USB Interface Adapter, 1-pack
Serial Interface Adapter, 1-pack with power supply
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles
Switches. Cat52 cables can be found at the following URL:
http://www.hp.com/go/kvm
HP 1x4 USB/PS2 KVM Switch, TT (NA/JPN)
HP 1x4 USB/PS2 KVM Switch, TT (AU/NZ)
HP 1x4 USB/PS2 KVM Switch, TT (UK)
HP 1x4 USB/PS2 KVM Switch, TT (EU)
DA - 12325
Worldwide — Version 4 — November 7, 2005
AF100A
262585-B21
262586-B21
336044-B21
336045-B21
262588-B21
262587-B21
336047-B21
373045-B21
371301-D71
371301-011
371301-031
371301-A21
Page 23
QuickSpecs
HP ProLiant BL35p Server Blade
Options
HP 1x4 USB/PS2 KVM Switch, RM (ALL)
HP PS2 KVM Cable with audio, 6'-2-pack
HP USB KVM Cable with audio, 6'-2-pack
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
Service and Support
NOTE: The HP Care Pack service part numbers below for HP ProLiant BL p-Class
Offerings (HP Care Pack server blades, cover the server blade and all HP branded hardware options qualified
Services)
for the server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
NOTE: The HP Care Pack service part numbers below for HP BladeSystem p-Class
server blade enclosure covers the enclosure including patch panels, HP supported
Ethernet interconnects, power enclosure with power supplies and power distribution.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
NOTE: The HP Care Pack service part numbers below covers the HP BladeSystem
Brocade and McData SAN Switches.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage,
3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
HP Installation & Startup Service for HP BladeSystem Infrastructure, Electronic
NOTE: - provides for an integrated hardware and software implementation that
includes remote service planning, onsite deployment of hardware and software,
installation verification testing and customer orientation. Hardware deployment covers
the installation of a single BladeSystem enclosure that include server blades (up to
16), Ethernet network interconnect, and power options. Software deployment covers
the installation and configuration of HP Systems Insight Manager (SIM), HP Rapid
Deployment Pack (RDP), and deploy up to two operating system editions of either
Windows or Linux, using scripted operating system installation software
ProLiant BL p-Class Blade Server Hardware Installation, Electronic
ProLiant BL p-Class Enclosure and Server Blade Hardware Installation, Electronic
DA - 12325
Worldwide — Version 4 — November 7, 2005
371302-B21
371730-B21
371729-B21
UD186E
UD187E
UD188E
UD189E
HC031E
HC032E
HC033E
UC007E
UC008E
UC009E
UC023E
UC905E
UA219E
U4971E
Page 24
QuickSpecs
HP ProLiant BL35p Server Blade
Options
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack,
Electronic
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server will be
deployed using either one of the pre-configured scripts or an image. In addition, the
service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard
office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of
Rapid Deployment Pack (Basic) (Electronic)
HP ProLiant Essentials Vulnerability and Patch Management Pack, Electronic
NOTE: Installation and Startup Service. Service coverage: onsite installation of the
Vulnerability and Patch Management (VPM) software on a customer designated server,
configuration of the VPM software to acquire security patches, enabling the VPM
software to scan up to five (5) systems, applying the security patches to the designated
servers, generating a report from VPM that shows the vulnerability assessment results,
and providing customer with an orientation to the software.
Provides for the Installation and Start-up of System Insight Manager (Electronic)
Provides for the Installation and Start-up of System Insight Manager (Electronic)
NOTE: For more information, customer/resellers can contact
http://www.hp.com/hps/.
Software Operating Environment Care Packs
Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident
(Electronic)
Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident
(Electronic)
SUSE Software Operating Environment Software Telephone 9x5 - 3 incident
(Electronic)
ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident (Electronic)
DA - 12325
Worldwide — Version 4 — November 7, 2005
U5683E
UA042E
UC929E
UA041E
UA040E
U8169E
U3402E
U9615E
U8222E
Page 25
QuickSpecs
HP ProLiant BL35p Server Blade
Memory
DIMM installation guidelines:
1. All DIMMs must be PC3200 DDR 400 MHz SDRAM DIMMs, or PC2700 DDR 333 MHz SDRAM DIMMS.
2. Both DIMM slots in a memory bank must be populated.
3. Both DIMMs in a memory bank must be identical.
4. Processor 1 memory bank must always be populated.
5. For optimal performance in most applications, populate the memory bank for every populated processor socket.
6. DIMM banks are active only when the corresponding processor socket is populated.
HP ProLiant BL35p Server Blade (1P model)
Standard Memory
1024 MB of PC3200 DDR SDRAM running at 400 MHz (2 x 512 MB)
Standard Memory Replaced with Optional Memory
Up to 4096 MB of PC3200 DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of
optional DDR SDRAM DIMM memory expansion kits.
Up to 8192 MB of PC2700 DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of
optional PC2700 SDRAM DDR DIMM memory expansion kits.
NOTE: Maximum memory configuration with one processor installed using PC3200 DDR SDRAM DIMMs is 4096 MB (2 x 2048
MB), or 8192 MB using PC2700 DDR SDRAM DIMMs (2 x 4096 MB.) Second processor must be installed in order to use the 2nd
bank of memory (Slots 3 and 4.) Maximum memory configuration with two processors installed using PC3200 DDR SDRAM DIMMS
is 8192 MB (4 x 2048 MB), or 16384 MB using PC2700 DDR SDRAM DIMMs (4 x 4096 MB.)
Memory
Slot
1
2
3
4
Standard
Optional
4 GB
PC3200
Maximum
8 GB
PC2700
Maximum
1024 MB
2048 MB
512 MB
1024 MB
512 MB
1024 MB
Empty
Empty
Empty
Empty
4096 MB
2048 MB
2048 MB
Empty
Empty
8192 MB
4096 MB
4096 MB
Empty
Empty
Following are memory options available from HP:
8192 MB of Advanced ECC PC2700 DDR-333 SDRAM DIMM Memory Kit (2 x 4 GB)
4096 MB of Advanced ECC PC3200 DDR-400 SDRAM DIMM Memory Kit (2 x 2 GB)
2048 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB)
1024 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
DA - 12325
Worldwide — Version 4 — November 7, 2005
395409-B21
379300-B21
376639-B21
376638-B21
Page 26
QuickSpecs
HP ProLiant BL35p Server Blade
Memory
HP ProLiant BL35p Server Blade (2P model)
Standard Memory
2048 MB of PC3200 DDR SDRAM running at 400 MHz (4 x 512 MB)
Standard Memory Replaced with Optional Memory
Up to 8192 MB of PC3200 DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of
optional DDR SDRAM DIMM memory expansion kits.
Up to 16384 MB of PC2700 DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of
optional PC2700 SDRAM DDR DIMM memory expansion kits.
NOTE: Maximum memory configuration with one processor installed using PC3200 DDR SDRAM DIMMs is 4096 MB (2 x 2048
MB), or 8192 MB using PC2700 DDR SDRAM DIMMs (2 x 4096 MB.) Second processor must be installed in order to use the 2nd
bank of memory (Slots 3 and 4.) Maximum memory configuration with two processors installed using PC3200 DDR SDRAM DIMMS
is 8192 MB (4 x 2048 MB), or 16384 MB using PC2700 DDR SDRAM DIMMs (4 x 4096 MB.)
Memory
Standard
Optional
8 GB
PC3200
Maximum
16 GB
PC2700
Maximum
Slot
1
2
3
4
2048 MB
4096 MB
512 MB
1024 MB
512 MB
1024 MB
512 MB
1024 MB
512 MB
1024 MB
8192 MB
2048 MB
2048 MB
2048 MB
2048 MB
16384 MB
4096 MB
4096 MB
4096 MB
4096 MB
Following are memory options available from HP:
8192 MB of Advanced ECC PC2700 DDR-333 SDRAM DIMM Memory Kit (2 x 4 GB)
4096 MB of Advanced ECC PC3200 DDR-400 SDRAM DIMM Memory Kit (2 x 2 GB)
2048 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB)
1024 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
DA - 12325
Worldwide — Version 4 — November 7, 2005
395409-B21
379300-B21
376639-B21
376638-B21
Page 27
QuickSpecs
HP ProLiant BL35p Server Blade
Technical Specifications
HP ProLiant BL35p Server Dimensions
Blade
Height
1.61 in (4.1 cm)
Depth
25.35 in (64.4 cm)
Width
4.72 in (12.0 cm)
Weight
Maximum
8.19 lb (3.72 kg)
No Drives Installed
7.76 lb (3.52 kg)
Temperature Range*
Operating
50° to 95° F (10° to 35° C)
Range
Shipping
-40° to 140° F (-40° to 60° C)
Storage
-4° to 140° F (-20° to 60° C)
Maximum Wet Bulb
86° F (-30° C)
Temperature
Relative Humidity**
Operating
10% to 90%
Humidity
Shipping
10% to 90%
Storage
10% to 95%
*NOTE:
NOTE: All temperature ranges shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is
3,048 m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
**NOTE:
NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
© Copyright 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD is a US registered trademark of Advanced
Micro Devices, Inc.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 12325
Worldwide — Version 4 — November 7, 2005
Page 28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising