Touch Screen Monitor User manual

Touch Screen Monitor

User Manual

Content:

Cautions ......................................................................................................................... 2

1 Package contents ......................................................................................................... 2

2 Driver install ............................................................................................................... 2

3 Touch Screen Calibration ............................................................................................ 6

Touch Screen Monitor User Manual

Cautions

1.1 The touch screen is made of glass and is easily breakable. Please handle it with care.

1.2 Please make sure touch screen (USB or serial port) is connected to the PC.

1.3 Please close your Antivirus Software before installing the driver.

1.4 After driver installation, please reboot computer.

1.5 Do not plug the monitor in and out while the computer is on. For best results clean the front and rear surface of touch screen.

1.6 Touch screen system is comprised of: touch screen and PC.

1 Package contents

In the carton, you will find the following:

・Infrared touch screen

・USB connecting wire

・CD (User manual, software)

2 Driver install

Open the Driver CD disk, and choose the driver according to the user’s computer system. Or download the driver from http://www.avnudigital.com/touch-screen-m32s1-t.php

under the support tab.

Here it is an example for reference:

2.1 Double , as below

For single touch screen, Serial Port

For single touch screen, USB

For multi touch screen, Serial port

For multi touch screen, USB

For single touch, Serial port

2

Touch Screen Monitor User Manual

2.2 Choose

“ETO, MT, USB”, Click “install”

2.3 Click “Install”, below Progress Bar will appear

3

Touch Screen Monitor User Manual

2.4 During installation, you will see below Dialog

Click Install as below

4

Touch Screen Monitor User Manual

Click “Close”, the driver is installed successfully

After driver installation, there is icon show on the right corner of computer. For more detailed instruction, please refer to “Help” as below.

5

Touch Screen Monitor User Manual

3 Touch Screen Calibrations

If you find that touch is not accurate, please use this option to calibrate.

Click the Driver Icon, and choose “Calibrate”

Touch the “arrows” as it appears to calibrate the touch screen.

6

Touch Screen Monitor User Manual

After finishing calibration, please reboot computer.

7