Touch Screen User Manual

Touch Screen User Manual
Touch Screen Monitor
User Manual
Content:
Cautions ......................................................................................................................... 2
1 Package contents ......................................................................................................... 2
2 Driver install ............................................................................................................... 2
3 Touch Screen Calibration ............................................................................................ 6
Touch Screen Monitor User Manual
Cautions
1.1 The touch screen is made of glass and is easily breakable. Please handle it with
care.
1.2 Please make sure touch screen (USB or serial port) is connected to the PC.
1.3 Please close your Antivirus Software before installing the driver.
1.4 After driver installation, please reboot computer.
1.5 Do not plug the monitor in and out while the computer is on. For best results clean
the front and rear surface of touch screen.
1.6 Touch screen system is comprised of: touch screen and PC.
1 Package contents
In the carton, you will find the following:
・Infrared touch screen
・USB connecting wire
・CD (User manual, software)
2 Driver install
Open the Driver CD disk, and choose the driver according to the user’s computer
system.
Or
download
the
driver
from
http://www.avnudigital.com/touch-screen-m32s1-t.php under the support tab.
Here it is an example for reference:
2.1 Double
, as below
For single touch screen, Serial Port
For single touch screen, USB
For multi touch screen, Serial port
For multi touch screen, USB
For single touch, Serial port
2
Touch Screen Monitor User Manual
2.2 Choose“ETO, MT, USB”, Click “install”
2.3 Click “Install”, below Progress Bar will appear
3
Touch Screen Monitor User Manual
2.4 During installation, you will see below Dialog
Click Install as below
4
Touch Screen Monitor User Manual
Click “Close”, the driver is installed successfully
After driver installation, there is icon show on the right corner of computer. For more
detailed instruction, please refer to “Help” as below.
5
Touch Screen Monitor User Manual
3 Touch Screen Calibrations
If you find that touch is not accurate, please use this option to calibrate.
Click the Driver Icon, and choose “Calibrate”
Touch the “arrows” as it appears to calibrate the touch screen.
6
Touch Screen Monitor User Manual
After finishing calibration, please reboot computer.
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement