MONITOR II A.N.C.
USER MANUAL
LEGAL AND TRADEMARK NOTICE
DISCLAIMER
•
Design of device and packaging are intellectual properties of Zound Industries International AB. © All
Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries”.
•
MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are
trademarks and intellectual property of Marshall Amplification Plc and may not be used without
permission. Permission granted to Zound Industries.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the
Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
•
The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Zound Industries is under license.
•
Google Play and the Google Play logo are trademarks of Google LLC.
•
Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App
Store is a service mark of Apple Inc., registered in the U.S. and other countries.
The information contained herein is correct at the time of publication, with reservation for editorial errors.
This product is software dependent and its functions and compatibility can change when updating the
software.
•
All other trademarks are the property of their respective owners and may not be used without
permission.
Designed in Stockholm • Produced in China
The availability of third party services may need separate agreements between you and any third party and
Zound Industries International AB do not take responsibility for the availability of such services.
Stated play time is calculated using a random selection of music, played at medium volume.
For more legal information related to this product and to its use in your specific region, and for more
detailed information about Zound Industries and partner & license information, please visit the website:
www.marshallheadphones.com. The user is recommended to visit the website regularly for up-to-date
information.
Zound Industries International AB, Centralplan 15, 111 20 Stockholm, Sweden
R1
002
003
INDEX
002. LEGAL AND TRADEMARK NOTICE
006. GETTING STARTED
006. DEVICE LAYOUT
007. THE CONTROL KNOB
008. THE LED INDICATOR
008. CHARGING YOUR HEADPHONES
009. THE ANC MODE BUTTON
010. THE M-BUTTON
010. THE 3.5 MM INPUT
011. TROUBLESHOOTING
004
GETTING STARTED
001. Push and hold the control knob until the LED indicator blinks blue.
002. Select MONITOR II from your audio device’s Bluetooth® list.
003. Download the Marshall Bluetooth app and follow the in-app instructions
to setup the M-button, adjust ANC, customise the EQ settings and more.
Get the Marshall Bluetooth app on Google Play or the App Store.
It is recommended to charge the battery before using your headphones for the
first time.
DEVICE LAYOUT
001. Customisable M-button
002. ANC mode button
003. LED indicator
004. 3.5 mm input
005. USB-C port for charging
006. Multi-directional control knob
005
006
THE CONTROL KNOB
THE LED INDICATOR
Use the control knob on the right ear cap to control audio, start Bluetooth®
pairing mode and turn the headphones on or off.
The LED indicator is located on the left ear cap and shows the headphones
status:
FUNCTION
ACTION
LED STATUS
HEADPHONES STATUS
POWER ON/OFF
Push and hold for 2 seconds
RED-ORANGE-YELLOW-GREEN
Charging (0-100% battery level)
PLAY/PAUSE
Single-click
WHITE LIGHT BLINKING EVERY 5TH SECOND
SKIP FORWARD
Push to the right
Powered on, connected to a Bluetooth® device with
audio paused
SKIP BACK
Push to the left
WHITE BLINKING
Searching for previously paired devices
FAST FORWARD
Push to the right and hold
BLUE BLINKING
Bluetooth pairing mode
REWIND
Push to the left and hold
OFF
Power off or playing via Bluetooth
TURN UP THE VOLUME
Push upwards
TURN DOWN THE VOLUME
Push downwards
HANDLE CALLS
Single-click to answer or end call
Double-click to reject an incoming call
CHARGING YOUR HEADPHONES
When the battery charge is low, an alert will sound.
Plug your headphones into a USB power source via the USB-C cable to charge
the battery. A full battery recharge takes approximately 2 hours, and 15
minutes of charging can get you up to 5 hours of wireless playtime.
007
008
THE ANC MODE BUTTON
THE M-BUTTON
Monitor II A.N.C. utilise Active Noise Cancelling (ANC) technology that
continuously pinpoints and measures ambient noise to control how much of
the outside world you hear.
The M-button can be set to switch between three different equaliser presets or
alternatively, your phones voice assistant or the Google Assistant.
There are two ANC modes.
•
Active noise cancelling - Block out the noise and focus on what is
playing.
•
Monitoring mode - Let the outside world in to engage in a conversation
or listen to an announcement.
Use the ANC button to quickly change between modes.
001. Short press toggles Active noise cancelling and Monitoring mode
002. Push and hold for 2 seconds to turn ANC off or on
The level of noise cancelling and monitoring can be adjusted in the Marshall
Bluetooth app.
009
Go to the Marshall Bluetooth app and configure the M-button from the
M-Button settings menu
Note: Voice assistant may not be available in your country and requires a
separate account/agreement between you and the third party service.
THE 3.5 MM INPUT
To use the Monitor II A.N.C. with a wired device, simply use the 3.5 mm cable
included. Once connected, Bluetooth will disconnect for audio streaming. You
can still use ANC, as long as your headphones are turned on.
When the 3.5 mm cable is disconnected, the headphones will try to reconnect
with the last connected Bluetooth device.
010
TROUBLESHOOTING
PROBLEM
CAUSE
CANNOT PAIR WITH A
BLUETOOTH DEVICE
The headphones are not in pairing Make sure the headphones are
mode.
turned off. Push the control
knob for 4 seconds, until the
LED indicator blinks blue. Select
MONITOR II from your Bluetooth
device list.
ANC IS NOT WORKING
ACTION
CAUSE
ACTION
THERE ARE TWO INSTANCES OF
MONITOR II IN THE BLUETOOTH
DEVICE LIST
Monitor II A.N.C. uses two
Bluetooth connections. One
connection is for audio streaming
and the other is a low energy
Bluetooth connection for the app.
This is normal behaviour and no
action is needed.
THE HEADPHONES ARE NOT
RESPONDING
A software error has occurred.
Perform a hardware reset:
Your headphones are connected
to the 3.5 mm lead.
Disconnect the 3.5 mm cable from
your headphones before Bluetooth
pairing
Your headphones are not turned
on.
Push the control knob for
2 seconds to turn on your
headphones.
If the problem persists, perform a
factory reset.
ANC is not on.
Push the ANC button for 2
seconds to turn ANC on.
Note: This will delete all user
settings and after the factory
reset, the headphones need to be
set up again.
Short-press the ANC button to
toggle the ANC modes.
ANC level is turned down in the
Marshall Bluetooth app.
011
PROBLEM
Go to the Marshall Bluetooth app
and set the level of the ANC in the
ANC settings menu.
Push and hold the M-button
while pushing the control button
downwards.
Push and hold both the M-button
and the control knob for 7
seconds until the LED indicator
turns purple.
012
MARSHALLHEADPHONES.COM
">
