Sensei SPS-R User Manual
SPS-R
Cut-to-Fit LCD
Screen Protector Kit
USER MANUAL
Thank you for choosing Sensei.
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit
screen protector is designed to protect your
device’s LCD screen from scratches, dust, and
smears. It’s easy to apply and remove, it adheres to
the LCD screen without leaving behind any sticky
residue, and the paper backing includes printed
grid lines to help you custom-fit the screen
protector to the exact size you need.
Please read these instructions carefully before
applying your Sensei Cut-to-Fit LCD Screen
Protector.
Box Contents
•
•
•
•
Six (6) screen protectors
Three (3) wet wipes
Three (3) dry wipes
Applicator card
Instructions
Note: Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of
your camera’s LCD screen.
1. Measure the height
and width your
device’s LCD screen
in millimeters.
2. Using a pair of
scissors or a razor and
a straight edge, trim
the screen protector
along the guidelines
that correspond to
your camera’s LCD
size.
3. Remove all films or
other intervening
substances from your
camera’s LCD.
4. Clean the LCD with
the included wet wipe,
and then wipe it dry
with the dry wipe. Be
sure to remove all dust
and fingerprints.
5. Partially peel off
the backing from the
screen protector. Be
careful not to get any
fingerprints on the
exposed side of the
screen protector.
6. Make sure your
camera is on a stable
surface, and align the
screen protector with
the camera’s LCD.
Tip: Turning on the
LCD will make it easier
to see the edges
when aligning the
screen protector.
7. Hold the backing of
the screen protector
up while gently
pushing down on the
screen protector with
the included
applicator card. As
you push the
applicator card along
the camera’s LCD to apply the screen protector,
the backing will gradually peel off.
8. Use the applicator
card to smooth out
any remaining air
bubbles by pushing
them to the edge of
the screen protector.
Limited One-Year Warranty
Sensei provides a limited warranty that this product
is free from defects in materials and workmanship
to the original purchaser under normal use for a
period of one (1) year from the original purchase
date or thirty (30) days after replacement
whichever occurs later. Our responsibility with
respect to this limited warranty shall be limited
solely to repair or replacement, at its option, of any
product which fails during normal consumer use. To
obtain warranty coverage during the Warranty
Period, contact your place of purchase (“Seller”) to
obtain a return merchandise authorization (“RMA”)
number, and return to Seller the defective product
along with proof of purchase and the RMA number.
This warranty does not extend to damage or failure
which results from misuse, neglect, accident,
alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN,
SENSEI MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may
also have additional rights which vary from state to
state.
www.MadebySensei.com
© Copyright 2012 Gradus Group
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement