HiTi CS 200e Card Printer User manual
The HiTi CS 200e is a high-quality card printer that can be used to print personalized ID cards, credit cards, membership cards, and badges. It is easy to operate and prints high-quality plastic cards conveniently from various levels of thickness and color styles. The HiTi CS 200e is compatible with Windows 2000/XP/Vista/Windows 7 and Macintosh OS X version 10.2/10.3/10.4/10.5/10.6. It also comes bundled with a software application called “HiTi CardDésirée CS” which allows you to edit most of your card designs.
Advertisement
Advertisement
HiTi
user manual
HiTi Digital, Inc.
www.hiti.com
CONTENTS
PREFACE
Announcements
Chapter 1. Getting ready
1.1 Checking box contents
1.2 Appearance of the printer and key functions
1.3 Installation
Collecting
Adjusting
Chapter 2. Start Printing
2.1 Printer driver installation
2.2 Print settings
2.3 Print software application
Chapter 3. Printer maintenance
3.1 General warranty information notice announcement
3.2 Routine / Regular printer cleaning
Chapter 4. Help diagnosis
4.1 Warnings / Error messages and diagnosis
4.2 Printing a demo chart
4.3 Identify installed driver software version
4.4 Troubleshooting
4.5 Technical support
Appendix A: Technical Specifications
HiTi CS-200e user manual
13
14
18
18
10
11
12
13
20
20
21
23
24
06
09
09
10
01
03
03
04
HiTi CS-200e user manual
Copyright
HiTi CS Card Printer © 2011. All rights reserved.
Copyright notice
Users must comply with the copyright regulations applicable in their own country. This manual must not be reproduced, translated, photocopied, transmitted or any kind to be duplicated in whole or in part, for any reasons and by any electronic or mechanical means whatsoever without the express a written consent of the HiTi Digital Inc.
All the information contained in this document is subject to changed without prior notice.
HiTi Digital Inc. cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result of dissemination or use of this manual.
Trademarks acknowledgement
HiTi CS Card Printer is a trademark of HiTi Digital Inc. product. All other trademarks belong to their respective holders.
Warranty
Refer to the warranty card supplied with your card printer package box for warranty terms, conditions and limitations.
01
HiTi CS-200e user manual
Knowing your new printer
We thank you for choosing HiTi CS card printer, the beginning of our long term successful association with you together. With HiTi CS card printer, you will be able to enjoy easy operating, high quality plastic cards printing conveniently for personalized ID card, credit cards, membership cards and badges from various level of thickness and color style. Please ensure HiTi CS card printer to use the original consumables from HiTi Digital Inc. For more details, visit our website at
www.hiti.com .
Warranty Registration
Please do take time to register online at
www.hiti.com and you will be rewarded with a special offer after registration is completed.
Getting ready to start
The main purpose of this user guide is to guide you to set up your printer step by step. Please take time to read through this carefully and complete the installation before start operating. This will save you time during installation and use, help you to understand more about this printer and its features. Should you discover any errors in this guide, please do help us by emailing us at
Assistant Icons
The following assistant icons will show up in this guide to indicate important information to be noticed.
Special warning notice More in-depth information notice
02
HiTi CS-200e user manual
Chapter1. Getting ready
1.1 Checking box contents
HiTi CS card printer is supplied with several accessories and please do take time to check it closely.
The accessories contents list may vary depending from your region/location.
If any of below item is missing, please contact your nearest HiTi customer support facility of your local
HiTi CS card printer distributor. For details customer support facility list, please refer to Appendix
C: Customer Service Information.
Accessories provide with your HiTi CS card printer:
Card output hopper Weight module USB cable Power adaptor Power core
User guide Master CD Cleaning roller
03
Cleaning kit
1.2 Appearance of the printer and key functions
Top cover opening button
LCM control panel
Manual card feed input location
04
HiTi CS-200e user manual
Input card cover
Input card feeder (100cards)
Manual releasing card jam screw socket
(slotted screwdriver)
Spec. label
ON / OFF hard power switch button
USB cable connection socket
Power socket
Ethernet expansion socket
Smart IC encoding expansion socket
Thermal print head
Ribbon spool fitting position
(color coded)
Ribbon ID key socket
HiTi CS-200e user manual
Card thickness adjustment gauge
Cleaning roller socket
05
HiTi CS-200e user manual
1.3 Installation
1.3.1 Ribbon Installing
Using the original HiTi CS Card Printer Ribbon consumables will optimize your printer’s performance and avoid causing damages to it. Use of non HiTi original consumables will void the manufacturer’s warranty policy for the printer.
For optimum printing quality, please ensure the printer is fully cleaned each time when the ribbon is changed.
Refer to servicing and maintenance section of this user guide. a. Open the top cover.
b. Place the ribbon ID key into ID key socket. c. Insert the ribbon as shown.
Please ensure your ribbon format is corresponded to installed ribbon ID key’s label.
Please make sure your ribbon film is facing top side during installation and also ensure the color of ribbon spool/core is matching to the ribbon adapter/holder.
d. Close the top cover slowly and press until a click sound is heard.
a b c d
06
HiTi CS-200e user manual
1.3.2 Printer Connecting (Power & USB)
Power
a. Connect power cable to power adaptor, then plug the power connector to printer’s power socket b. Plug the power plug to an earthed power socket
Please make sure the power plug is connected into a properly protected and earthed electrical source.
c. Switch ON from the ON/OFF button to power up the printer, then the LCM control panel should light up and display
“ready” message which indicates the printer is under working condition.
For your own safety, please make sure the power cable is always unplugged before attempting any service maintenance work. a b c d
Ready
USB
Please make sure the print driver software is fully installed before connecting the USB cable to your printer device.
Refer to the print driver installation section of this user guide for more details, and follow the instruction carefully.
07
HiTi CS-200e user manual
1.3.3 Card Placing
Loading (Automatic)
For optimum printing quality, please ensure all cards are CR-80 standard with ISO 7810 certified.
Please do not touch the printable surface and not to use any dusty, damaged, folded or embossed cards in your printer.
a. Open input card cover.
b. Place the cards into input card feeder with positioned shown in the diagram. c. Close the input card feed cover.
a b c
Loading (Manual queue jump)
This feature is designed when a single manually queue jump in printing or encoding job is required during fully loaded cards are positioned in input card feeder.
a
a. Insert card manually with location and positioned shown in the diagram. b. Start printing or encoding command from PC.
08
HiTi CS-200e user manual
Collecting
When the printing and/or encoding cycle is completed, the printed and/or encoded card will be returned into output hopper which is designed with a capacity of 50 x 0.8mm cards.
Adjusting
The printer has a manual adjustable card thickness mechanism which can be located inside the printer unit when the top cover is open. The thickness level accepts from 0.3mm to 1.0mm, and the factory setting is at 0.8mm.
a. Open the top cover.
b. Adjust the thickness level by moving the lever from left to right to the preferred thickness setting. c. Close the top cover.
a b c
09
HiTi CS-200e user manual
Chapter2. Start printing
2.1 Print driver installation
For your own safety, please make sure the power cable is always unplugged before attempting any service maintenance work.
This is an important step and requires special attention to configure the printer and driver correctly before start using it.
Improper settings may result in substandard quality. It is essential to proceed installation process step by step, and changing any default settings only if when you are completely sure. We do offer an option to revert settings back to original factory settings at any time if any adjustment which you have made that does not correspond to the expected outcome results.
This printer does bundle with a CD guide which containing the print driver detail information for Microsoft Windows and
Mac platform.
If the CD guide is missing, please contact your nearest HiTi customer support facility or your local
HiTi CS card printer distributor. For detail customer support facility list, please refer to Appendix
C: Customer Service Information.
To begin install a print driver, please insert the CD into your computer and select the printer driver menu. A program will start and guide you through the entire configuration and settings process step by step.
Please refer to printer connecting section for USB connecting procedure in this user guide for more details.
Some version of Microsoft Windows and Mac platform may require the user to have administration rights to install the driver.
10
HiTi CS-200e user manual
2.2 Print settings
Before start using your HiTi card printer, it is very important to double check and/or change the default print driver settings. Those settings includes in the following list:
Ribbon types Card types Card thickness Others
Please pay attention to the settings under printer driver properties and contact your local HiTi distributor or dealer for any advice and assistance needed before attempting any changes.
Those print settings can be accessed from the following instructions:
From the Start button (located bottom-left on the Windows task bar), select Printers and Faxes
Select your HiTi card printer and then follow by a double click
From the Printer menu, select Properties
A pop up configuration screen for HiTi card printer appears
The main menu tabs include Device Option, Printing Area, Color, Tools, Magnetic Encoding, Import/Export & About
The most frequent use in print settings are Device Option, Color and Tools.
Device Option Tab
Ribbon type
Card type
Card thickness
Front & back image
Page order
Using Resin K
Color Tab
Color preference setting
Special function
Color adjustment
11
Tools Tab
Printer position adjuster
Cleaning tool option
Maintenance info
Advance option
Heating energy option
HiTi CS-200e user manual
2.3 Print software application
HiTi card printer provides a value added software application called “HiTi CardDésirée CS” which allows you to edit most of your card design through this easy and user friendly software. For more information, please refer the
HiTi CardDésirée CS user guide directly.
12
HiTi CS-200e user manual
Chapter3. Printer maintenance
3.1 General warranty information notice announcement
HiTi CS card printer is professional designed to provide you a long term service duty with minimum regular maintenance required. Therefore please do comply with the instructions given in below to ensure your printer unit is covered by warranty condition.
* IT’S IMPORTANT TO STAY COVERED BY YOUR WARRANTY!! *
All the manufacturer’s warranty conditions are subject to strict adherence to the regular routine servicing and maintenance instructions, and also printer cleaning cycles.
Any failure of the following required servicing and maintenance job duties mentioned in this chapter will void the print head warranty.
HiTi CS card printer accepts no any other liability what so ever where it has been any single failure to perform required servicing and maintenance job duties on the printer. It is common to know that the print head is an extremely sensitive as well as a wearing and tearing component. Therefore the life expectancy is heavily depending on the presence of solids, dust or liquids in the environment, either on the print head or cards. Every operating user must take all necessary precautions to use clean cards in the printer unit. The frequency and quality of the servicing and maintenance job duties will not only extend the print head’s life expectancy, but also maintain the output printed quality. It is very important to all users must comply with the servicing and maintenance instructions which described within this chapter.
Use of non HiTi original consumables/ribbons may affect the quality and reliability of print job, low quality printed output and may also affect the printer’s physical functions. The manufacturer’s warranty does not cover any physical damages, quality problems and print head warranty by using non HiTi original consumables/ribbons.
13
HiTi CS-200e user manual
3.2 Routine / Regular printer cleaning
The print head warranty is strictly related to routine cleaning of your printer, and if failed to do so under any circumstance, the print head warranty will be cease immediately.
The printer has equipped with warning system which will display warning messages on your PC after the printer has achieved a certain number of inserted/printed cards. Please follow the standard cleaning process as soon as the warning message displayed, and before the warranty becomes invalid.
Item Description
Color / Mono Ribbon
Magnetic Encoding
Cleaning required after
Numbers of cards remaining before invalid warranty
Cleaning required after
400 cards 100 cards 500 cards
400 cards 100 cards 500 cards
If the printer has been inserted/printed 30 cards after the warning message displayed, then it would have
70 more cards before the print head warranty become invalid.
14
HiTi CS-200e user manual
3.2.1 Using cleaning card
Each pack/box of HiTi original consumables should contain one single piece of cleaning card. a. Remove any remaining cards from input card feeder.
b. Insert pilled protection film from both sides’ cleaning card into the feeder.
c. Press “OK” button on the LCM control panel to “Device Information”.
d. Press “Right” button to “Cleaning Mode”.
e. Follow the instruction messages displayed on the LCM control panel to complete the cleaning process.
a b c
Device Information d
Cleaning Mode
15
HiTi CS-200e user manual
3.2.2 Replacing cleaning roller
Each pack/box of HiTi original consumables should contain one single piece of cleaning roller.
a. Press the top opening button to open the top cover gently and remove cleaning roller from designated location.
b. Detach cleaning roller from the holder and remove the internal metal core.
c. Replace new pilled protection film cleaning roller with internal metal core fitted.
d. Assemble cleaning roller with holder.
e. Place the new cleaning roller back to original designated location.
a b c e old d new
16
HiTi CS-200e user manual
3.2.3 Cleaning TPH (Thermal Print Head)
Please unplug the power cable from printer before start doing TPH cleaning process.
Try not to make any direct physical contact to TPH with any metal/sharp objects or your fingers.
The TPH and its components must be kept away from any discharge of static electricity.
In order to maintain original print out quality and remove excess ink from print head, it is highly recommended to perform this process every time when a ribbon is changed.
a. Press the top opening button to open the top cover gently, the TPH is attached to the ribbon door.
b. Please use the cleaning sponge stick from HiTi cleaning kit to swab the TPH.
a b
17
HiTi CS-200e user manual
Chapter4. Help Diagnosis
4.1 Warnings / Error messages and diagnosis
HiTi CS card printer is designed to work independently and also to keep user involvement down to a minimum level.
However, it would be useful to gain some familiarity with few basic warning messages knowledge during the operation.
4.1.1 LCM control panel
Basic descriptions
The printer is equipped with a LCD display with four buttons to give the access to printer menu and two LED lights to show conditional status. All printing status and warning/error messages will be displayed in this LCD screen.
Return to previous setting menu
Return to previous option
Go to next option
Green Light / Normal status
Red Light / Error status
Go to next setting menu
18
HiTi CS-200e user manual
4.1.2 Control panel warning messages
PMessages Displayed
Cover Open
Reasons
Top cover door is opened
Flipper Cover Open Flipper cover door is opened
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Solutions
Close the top cover door.
Close the flipper cover door.
Ribbon IC chip is not inserted
Ribbon is not installed
Install ribbon IC chip into printer’s IC chip socket.
Install ribbon with corresponded IC chip into printer.
Installed ribbon does not match with ribbon IC chip ID Check ribbon type and install the corresponded IC chip.
Unsupported ribbon type Check ribbon’s region code with matching printer’s region code.
Failing to searching ribbon
End of ribbon usage
Fail to start printing process
Card runs out
Sensor cannot detect cards with full loading cards
Jammed during operation
Reinstall the ribbon again with correct installation procedure.
Reinstall a new ribbon with IC chip.
Contact your local service center for professional advice.
Place more cards with card’s weight module.
Check the card thickness level to match up with inserted cards.
Follow the LCM screen for releasing card jam instructions.
Card Mismatch
Cam Error
Flipper Error
Ribbon Error
Different types of cards
Internal mechanical cam platen error
Flipper unable to perform its duty
Ribbon’s IC chip error
Use CR-80 standard cards.
Contact your local service center for professional advice.
Contact your local service center for professional advice.
Reinsert IC chip again or change a new IC chip if it’s required.
19
4.2 Printing a demo chart
We strongly recommend that you do print a demo chart card to ensure your printer is working properly. This demo chart card shows various technical information and print out quality for future reference which you may be asked by your local service agent or HiTi customer service department staff members. Printing a demo chart card can be done from your card printer directly which can be access from your LCM control panel, under CSD model menu. A demo chart should look like as showing in below picture.
HiTi CS-200e user manual
Hiti CS-200e
4.3 Identify installed driver software version
You can easily indentify your driver version by accessing from your printer properties menu. It is essential to keep your printer driver to be the latest version which always published from official HiTi web site.
Checking your driver version can be accessed from the following instructions:
From the Start button (located bottom-left on the Windows task bar), select Printers and Faxes
Select your HiTi card printer and then follow by a double click
From the Printer menu, select Properties
A pop up configuration screen for HiTi card printer appears
The printer driver version is under the main menu tab called About
20
4.4 Troubleshooting
4.4.1 Printing problems
Nothing in action
Printed a blank card
Partial or incorrect printing
Printed some small blemishes
Printed horizontal white lines
Printed blurred images
Check the printer driver
Check the printer power supply and USB cable
Check the ribbon and card
Print a demo chart
Check the ribbon
The print head may be damaged
Check the printer settings
Check the interface cable and ribbon
Make sue the printer’s cleaning roller is clean
Check the printing card is clean
Check the print head
The card surface may be dirty
Cleaning rollers or print head clogged
Check the ribbon is fitted correctly
Check the print head is dirty or damaged
Check the ribbon is fitted correctly
Check the print head and/or cleaning roller is dirty or not
Check the card is compatible or not
HiTi CS-200e user manual
21
HiTi CS-200e user manual
4.4.2 Releasing from card jams
Please remove the jammed card by the following instruction displayed on LCM control panel of the printer before continuing the printing job.
Open the printer cover door
Remove the ribbon
Follow the instruction on the LCM control panel with three options: Auto remove card, Semi-auto removal and Manual removal
During semi-auto removal and manual removal process, please do not put your hands into the card printer.
You can also perform the following steps to prevent card jams:
Check the card thickness settings is correctly adjusted from the printer driver option and thickness gauge
Check the card thickness is fitted under specified specification in this manual
Check the cards are flat in horizontal position
Check the cards are not stuck together, and shuffle cards is required before loading
22
HiTi CS-200e user manual
4.5 Technical support
If you have come across any difficulties in configuring and/or operating your HiTi card printer, please read this manual carefully.
If you are unable to manage solving your problems, you can obtain further information or help from your local authorized distributor or reseller.
For any unresolved technical problems, if you don’t know your local distributor or reseller. You can visit our website
www.hiti.com for contacting information and send us your questions.
We will be more than happy to assist you at anytime. It is important for you to provide those following information at anytime during your contact for servicing help:
Your printer model and serial number
The configuration and operating system which you are using
A detail descriptions of the incidents/problems which has occurred
A detail descriptions of the steps which you have already taken to solve the incidents/problems
If you need any additional information or technical help, you can obtain those information from our website
www.hiti.com which offers you the ability to download the latest printer driver, firmware, user manual, and FAQ (Frequent Ask Questions) to maintaining your HiTi card printer.
23
HiTi CS-200e user manual
Appendix A: Technical Specifications
General Technical Features
Printing Modes
Performance
(various from card design & settings)
System Request
Supported Platforms
Supplied Software
HiTi CS-200e Card Printer
Color printing module
300dpi print head
USB connection
Ethernet TCP/IP connection as an optional module (ETA: Q3/2011)
32MB RAM / 1MB Flash
50 cards output hopper (0.8mm/30mil)
4 buttons and 2 LED control panel
Color sublimation and monochrome thermal transfer
HiTi color technology enhanced
Edge to edge printing
A.I smart ribbon saving for monochrome printing
Color: 1 side (YMCKO) = around 20 sec (under lab testing environment)
Monochrome: 1 side = 5 sec
IBM-PC or compatible, Windows 2000/XP/Vista, Pentium R class 133MHz above
Computer with 128MB RAM or higher, 100MB free hard disk space or higher
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
Macintosh OS X version 10.2/10.3/10.4/10.5/10.6
Linux
HiTi CardDésirée CS for designing and printing cards, compatible with Windows 2000/XP/Vista/7 and connects to MS Excel databases
24
Ribbon Types
Options
(Easy Add Modules)
Warranty
General Information
HiTi CS-200e user manual
5 panel YMCKO color ribbon: 400prints/roll
1/2 panel YMCKO color ribbon: 560prints/roll
Monochrome ribbon: up to 1000prints/roll (available in Black)
400 cards high capacity input hopper
Flipper module
Magnetic encoding module (ISO 7811 HiCo/LoCo or JIS2 magnetic strip encoder)
Smart IC encoding module (ISO 7816-2 / PC/SC, EMV 2000-1)
Contactless/RFID encoding module (ISO 14443A, B, ISO 15693, Mifare, DesFire, HID iCLASS)
Ethernet connection module
Vary from region to region, please consult with your local distributor or reseller for details
Card types: PVC card
Card format: ISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
Card thickness: From 0.3mm(10mil) to 1mm (40mil) – Dual side printing: From 0.5mm (20mil)
Input card feeder capacity: 100 cards (0.8mm/30mil)
Output hopper capacity: 50 cards (0.8mm/30mil)
Printer dimensions: 198mm (W) x 355mm (L) x 219mm (H)
Weight: 4.9kg
Connections: USB port, Ethernet TCP/IP port as an option (Ethernet 10/100 Mbps)
Power supply: AC input: 100~240V~2.5A, 50~60Hz / DC output: 24V = 4.16A
Operating environment: +15ºC to +32ºC / 20% to 85% RH (without condensation)
Storage environment: -20ºC to +60ºC / 20% to 90%RH (without condensation)
Operating ventilation: open cooled air area
25
Ჿ⻞
⊖ᆙ
Ὦɺὁ: Јআ
1.1
ᒑ⣶ҙૌ
1.2
֦֬ᑨक⤐Լ⋱
1.3
મ⡶ᅞೣ
֦ᦸᄇゝ
֦ᦸ⦲ᄮ
Ὦʷὁ: Ӭ֬
2.1
મ⡶㊪ՒⰖ㋤
2.2
Ӭ֬⥑હ
2.3
Ӭ֬ະᮢⰖ㋤
Ὦɿὁ: ᛤះΎℋ⩂
3.1
ࡣΎߗጻᓰ⦦ᆙ
3.2
હቅ᱿ᛤះΎ
Ὦ߈ὁ: ൢ֠Հ
4.1
⨸بُ⼂⦡⤻᱿⥗ᅜ
4.2
Ӭ֬ᛵ⥶ߧ֦
4.3
ᒑ⣶㊪ՒỄೣમ⡶᱿ᦹ
4.4
ᄑゃぜ
4.5
༬⠛ᄄိ
え⻞A: ༬⠛⣳ጁ
HiTi CS-200e
͐ᮢ⦦ᆙ
13
14
18
18
10
11
12
13
20
20
21
23
24
06
09
09
10
01
03
03
04
HiTi CS-200e
͐ᮢ⦦ᆙ
HiTi CS Card Printer ©2011
౺ȯ ᦹᓏሷȯ
͐ᮢ≛ൕㅱ⸅Ң߱ߡሷ〦ᦹᓏ᱿⠗⣳હȯ ͐ᮢ༆ҩ߱ቍ⳧⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)ᆙᷨ᱿ሬ
ㄇ࿙ᓏ˫Ԋʃവ˫˶᮫̬Ȯ˶̬ᅞೣ⡕ⵒ˷Қⵒ⢒⢌Ȯ⢒֬Ȯ≒⨿ȮЗႩŊᤀ⧄ᆯヅઈᦹȮᄽᦹ˫˶̬ࠣೣ
᱿ᅞೣاȯ
༆ҩҙծؐ᱿˶̬ΒȮᄽ˴ᄽॖሷ⩐ሩŊපʃנ⠗ⳇᵧȯ
⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)ʃଃ༆ҩʑר⋱ሳӛ᱿⼂⦡≟༫Ⴢ˶̬⪸˶Ŋʬʃଃяݽาकံᕇߌ༆
ҩҙૌ⦦ᆙ≟ⳍໞ᱿ံद⪭⪸ȯ
HiTi CS Card Printer
ᆯ⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)᱿ɺΤٴᦽŊሷҢ˟᱿ۄᐻᲀરໞ଼ᅠ˟Ω׳⎊᱿
ᮟᓏሷ≛ȯ
〦ᅠ֦֬ᑨ᱿ΎΔ᱿ጻ˴ُくӼጻᓰŊ⦼א≙ᮟٴᾼҙえԽ᱿ΎΔ⦦ᆙ֦ȯ
01
HiTi CS-200e
͐ᮢ⦦ᆙ
⨀෨ⴆႹ᱿HiTi CS ֦֬ᑨŊʏʈଭʴキᅞ᱿ໞԼ〦ȯ
ᅘ᱿֦֬ᑨר˫⩕෨ˉט ᆞ᱿Ⴝ̳Ŋᆹʬ⩕෨⢌̳ӛ㋧༌֬᱿ٴ⫨߱׳ỚΤඖջ᱿⨢֦ȮΒᮢ֦Ȯሳڂُ֦൏ὁ
֦߱ᦸʀ᱿ະᮢȯ ⦼ᷨΎ෨͐ᮢ׆ೇဏͧ᱿≩ቨٴُⶪ˴ȯ
ᓥʴ⤟ሩघ᱿ΒŊ⦼⥏ۊໟΩ᱿ℐἿ:
www.hiti.com .
⦼ᮢɺ㔄ᆹ⿵ʀℐ(www.hiti.com)⥘ҩ֦֬ᑨ᱿ΎߗŊᯍરໞ⥘ҩʠരŊໟΩ૽ሳᩦզ෨ϝᣅߊ㈘ȯ
༆ҩ᱿Ჿ᱿ᆯՀ෨Ⳁᔎ᱿ʴ⤟෨᱿֦֬ᑨ᱿⥑હȯ ߱আ͐ᮢԊŊ⦼˝₳〇⩊͐ᮢ༆ҩŊʴ⤟ӷ֦֬ᑨُ᱿Լ
⋱ŊⳆ૽ሳՀُῃ෨મ⡶ُ͐ᮢ᱿ᆹ⿵ȯ ॖኞ෨ᱹҙૌʑሷ⼂⦡Ŋ⦼ᱹⲶヅઈⵞ˴ⳇᵧໟΩ
ߧᐻଅ༆
ʁӬ᱿ߧᐻଅ༆૽⠧ḻ༆ҩʑ᱿⸅⣬Β
᧚Ӳ⨸ḻ᱿بḻ ሩघᆙُᷨⳖɺᔎ᱿Β
02
Ὦɺὁ Јআ
1.1
ᒑ⣶ҙૌ
෨᱿֦֬ᑨらᾼえɺˀⶪ˴Ŋ⦼෨␕ɺ㔄ᆹ⿵˝₳᱿ᒑውȯ
ᔍ֦֬ᑨᾼ⡹᱿ҙૌŊר⋱ߌᣅ෨߱᱿֒ࡍʃ≟ሷ⩐ջȯ
ॖኞʁӬ˶̬ɺㅮٴሷᵬ⇃Ŋ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
ॖኞㅱ⣬ʴ⤟઼ሺՖʑൔ᱿⫏⤻Ŋ⦼א≙༆ҩえ⻞
C:
઼ሺՖ⫏⤻
⎞֦֬ᑨら᱿ҙૌŘ
HiTi CS-200e
͐ᮢ⦦ᆙ ⲵӛ֦ᐥ ⶪ⸅֦
USB
ℬ ヅ⡶⇦ ヅℬ
͐ᮢ༆ҩ મ⡶҆ᷖᦸ ᛤះញⱐ
03
らᑨ ᆞᛤះ
1.2
༌֬ᑨक⤐Լ⋱˛₺
ʀ╾〦ྈ⸹
LCM
Ӽㄇኈ
༆ՒⳖ֦⚠
04
HiTi CS-200e
͐ᮢ⦦ᆙ
Ⳗ֦ᐥ╾
Ⳗ֦ᐥ(100֦)
༆Ւ֦ઋ(֓➦⃦⬚ઈ)
ᮟٴᐻ
ヅ〦ྈ⸹
USB
ם
ヅם
ი҂ೣℐ⭰םᑁ
ი҂ೣᇘᦸ⩊૯ᑁ
ᥖㆊ
⏨࿉ᄍ⇦⚠(㆞⏨֒Ӡ)
⏨ᇘᦸတᐥ
HiTi CS-200e
͐ᮢ⦦ᆙ
֦ᦸׂಙ⦲ᄮጥ
ᛤះញⱐᄍ⇦⚠
05
HiTi CS-200e
͐ᮢ⦦ᆙ
1.3 મ⡶ᅞೣ
1.3.1
⏨મ⡶
͐ᮢ׆ೇHiTi CS֦֬ᑨဏͧ᱿⏨Ŋ૽ሳᷨΎ֦֬ᑨ᱿ᄓ⋱Ȯٴ⫨ُⴍ҉ⳍໞ˶̬〦᱿ံࣺȯ
͐ᮢ˶̬׆ೇ᱿⏨Ŋ૽ሳ܄दΎߗ᱿ᓏᲩȯ
ᷨΎሱ̈́ջ᱿Ӭ֬ᄓ⋱Ŋ⦼߱ᕓᓝሩဘ⏨᱿ᆹŊ͐ᮢᛤះ֦ȯ ͐ᮢᅞೣ⦼א≙༆ҩҙ᱿ᛤះ⎞Ύὁῃȯ
a.
༌ʀ╾
b.
တҘᇘᦸ֦⎏⏨ᇘᦸတᐥ
c.
ͩߧḻમ⡶⏨
⦼ᷨΎ⏨ỚㆩُᇘᦸᐻḻὪ
⦼ᷨΎમ⡶⏨ᆹŊ⏨⍍ଶʀʏʈᷨ⦓⏨࿉Ⱗ᱿㆞⏨⎞⏨ᄍ⇦⚠
d.
૽ʀ╾〦ʀ᳅ӷ⊖ㅨᔋ
a b c d
06
HiTi CS-200e
͐ᮢ⦦ᆙ
1.3.2 ֦֬ᑨⳐ(ヅُUSB)
ヅ
a.
Ⳑヅℬӷヅ⡶⇦ŊᤋരⳐヅℬӷ֦֬ᑨὉ᱿ヅם
b.
Ⳑヅӷሷ߸ℬ᱿ヅͧະတಚ
⦼ᷨΎヅℬᆯⳐӷሷ६ۧΎ⩂ُ߸᱿ヅͧະ⚠
c.
ۓ֦֬ᑨὉ᱿ヅ〦Ŋ⦼ᷨ⦓LCMӼㄇኈㆴḻ”Ready”Ŋ͗ᷨΎᑨݽ߱ഩᑨᨊ๗
ᣅʴᷨΎ෨⎊⯿᱿મҚŊ߱ࡠ⠗˶̬ሷ〦ᑨݽ᱿ΎℋΔ᱿Ւ̳ԊŊ⦼ᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗
a b c d
Ready
USB
߱ⳐUSBℬӷ֦֬ᑨԊŊ⦼ᷨΎ֦֬ᑨ᱿㊪ՒⰖ㋤રҚ᱿⡕મ⡶રᯃ
⦼א≙༆ҩҙ᱿֦֬ᑨ㊪ՒⰖ㋤᱿મ⡶ᅞೣŊʏ˝₳᱿ͩᤫᔎ㊾Ⳗ⠗ȯ
07
HiTi CS-200e
͐ᮢ⦦ᆙ
1.3.3 ֦ᦸમ⇦ᅞೣ
⎊ՒⳖ֦
ᣅʴሱ̈́ջ᱿ٴ⫨Ŋ⦼͐ᮢCR-80ُISO 7810ᐻ⣳ҙ᱿֦ᦸ͗Ӭ֬
⦼խ⤯ႄ֦ᦸ᱿Ӭ֬ㄇŊُⴍ҉͐ᮢ˶̬㋢ᖸȮטံȮ≒༿ُሷә᱿֦ᦸ͗Ⳗ⠗Ӭ֬Ւ̳
a.
༌Ⳗ֦ᐥ᱿ʀ╾
b.
ͩߧḻᄍ⇦ʃỚㆩ᱿֦ᦸӷⳖ֦ᐥŊʏʈᄍҘⶪ⸅֦֦߱ᦸʀᅞ
c.
〦ʀⳖ֦ᐥ᱿ʀ╾
a b c
༆ՒⳖ֦
Ⳇㅮ᧚ᔢ᱿⥑⤺ᆯᣅʴⳖ⠗܈֦တҘӬ֬⩊૯᱿Ւ̳
a.
ͩߧḻŊ༆ՒတҘ֦ᦸӷ༆ՒⳖ֦ᐥ
b.
আࡠ⠗Ӭ֬⩊૯᱿Ւ̳
08 a
֦ᦸᄇゝ
ᯍӬ֬⩊૯Ւ̳રໞᆹŊҢ֦ᦸ૽ሳ⡕ⲵ⎏ⲵӛ֦ᐥŊ
ሱघר˫ૌₗ500.8mmଙ᱿֦ᦸ
֦ᦸ⦲ᄮ
֦֬ᑨⶪሷ༆Ւ⦲ᄮ֦ᦸׂಙ᱿⡶⇦Ŋᯍʀ╾⡕ۓᆹŊҢ⡶⇦̤߱ᑨݽҙⵒȯ
֦ᦸׂಙ᱿ߣ᮫0.3mmӷ1.0mm᱿ଙŊ≟ӛೇ⥑હᆯ߱0.8mm᱿ׂಙȯ a.
༌ᑨݽʀ╾
b.
ͩト͐ᮢ֦ᦸ᱿ׂಙŊͩఢ⦲ᄮ֦ᦸׂಙ⦲ᄮጥ⎏ᔌᷨ᱿⥑હ
c.
〦ʀᑨݽʀ╾
a b c
HiTi CS-200e
͐ᮢ⦦ᆙ
09
ὮʷὁŘӬ֬
2.1
મ⡶㊪ՒⰖ㋤
ᣅʴ෨⎊⯿મҚŊ߱ࡠ⠗˶̬ᑨݽΎℋΔՒ̳ԊŊ⦼ᷨΎヅℬ⚠ᅠቍⳐ᱿ᨊ๗
HiTi CS-200e
͐ᮢ⦦ᆙ
߱͐ᮢᮟٴԊŊଃᅠᔌᷨ᱿⥑હُᔌᷨ᱿મ⡶㊪ՒⰖ㋤ᆯɺㅮ⸅⣬᱿Ւ̳Ŋト⣬͐ᮢ≛⃛ʵ᧚Ӳ᱿ᘜาُ〦ᘜȯ ʃᔌᯍ᱿͐ᮢȮႽُ̳㊪ՒⰖ㋤મ⡶ᆯሳഛㅨӷӬ֬ٴ⫨᱿⸅⣬ߌ₪ʠɺȯ
ߌᔍŊྈⵒଔⳖ⠗મ⡶ُႽ̳Ŋᷨᄊ⩐〦⥑હאᄲᆯ⸅⣬᱿ȯ
ॖኞ˶̬⦲ᄮቍⳭӷㅷቅ᱿⠧ŊໟΩʬဏͧ෨૽֦֬ᑨുӷӛೇᆹ᱿׆͗⥑હϊ᱿⥑હᅞೣȯ
ᮟٴဏͧમ⡶҆ᷖᦸʑծWindowsُMac౹שト᱿㊪ՒⰖ㋤ȯ
ॖኞҙૌ⇃ଇમ⡶҆ᷖᦸŊ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
ॖኞㅱ⣬ʴ⤟઼ሺՖʑൔ᱿⫏⤻Ŋ⦼א≙༆ҩえ⻞
C:
઼ሺՖ⫏⤻
મ⡶֦֬ᑨ᱿㊪ՒⰖ㋤ᆹŊ⦼҅૽મ⡶҆ᷖᦸᄍҘヅ〉ʑ᱿҆ᷖᑨ⡶⇦ŊⴆႹ֦֬ᑨ㊪ՒⰖ㋤᱿Ჿ⻞ȯ
෨૽ሳ߱⎊Ւમ⡶Ễೣ᱿೧ʁરໞ㊪ՒⰖ㋤᱿મ⡶ȯ
ⳐUSBℬᆹŊ⦼ͩᤫ༆ҩҙ⥆ⰶ᱿USBℬ᱿Ⳑᅞೣ͗Ⳗ⠗ᔌᷨ᱿Ⳑ
ሷˀWindowsُMac᱿ᦹŊト⣬મ⡶㊪ՒⰖ㋤᱿ᮢңሷヅ〉ᾷڂ᱿ᓏく
10
HiTi CS-200e
͐ᮢ⦦ᆙ
2.2
Ӭ֬⥑હ
͐ᮢ֦֬ᑨԊŊ⦼ൕㅱࡠ⠗ᷨ⦓ሩᄊ׆҅㓿⦓᱿⥑હȯ
Ⳇˀ⥑હծؐʁӬ᱿ⴆㅮ:
⏨Ớㆩ ֦ᦸỚㆩ ֦ᦸׂಙ Ң
⦼ᘜาُᮽา㊪ՒỄೣҙ᱿˶̬⥑હŊॖʃᷨહŊ߱ϝ˶̬ΔᄊԊŊ⦼ُ෨ᯍ߸᱿⺨ۄ⊓↙ʏחവՀȯ
ͩᤫʁӬ᱿ᔎ㊾רⳖҘӷӬ֬᱿⥑હ
ྈʁ̤ᅠWindowsఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠
ⴆႹ֦֬ᑨʏʈྈқʁ
֦߱֬ᑨ᱿Ჿ⻞ʑⴆႹ଼ඖ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
⥑⇦⥑હ᱿Ჿ⻞ሷŘ⥑હⴆㅮȮӬ֬ߣȮ㆞⏨ȮడңȮ֦ᷬ⩊૯Ȯֈӛ/Ҙُ〦ᅠ
ሱ͐ᮢ᱿Ӭ֬⥑હᲿ⻞ሷŘ⥑હⴆㅮȮ㆞⏨ُడң
⥑હⴆㅮ
⏨Ớㆩ
֦ᦸỚㆩ
֦ᦸׂಙ
ᔌ/וㄇߧ
Ӭ֬
͐ᮢResin K
㆞⏨
㆞⏨۹॑⥑હ
᧚Ӳ⥑હ
㆞⏨⦲ᄮ
11
డң
Ӭ̤֬⇦⥑હ
ᛤះడңⴆㅮ
Ύℋ⩂⫏⤻
Ⳗべ⥑હ
Խᥖ⋱⸇⥑હ
2.3
Ӭ֬ະᮢⰖ㋤
ᮟٴらᑨえ⫾Խϊ᱿Ӭ֬ະᮢⰖ㋤”CardDésirée CS”ȯ
Ⳇह ᆞُ͐ᮢᅞ͵᱿ະᮢⰖ㋤Ŋ⩕͐ᮢ≛᳅⥑⤺֦ᦸʀบӬ֬᱿ߧጊ⫏ᅆȯ
ॖトሩⳖɺᔎ᱿ʴ⤟Ŋ⦼᳅א≙મ⡶҆ᷖҙ᱿⫏⤻ȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
12
HiTi CS-200e
͐ᮢ⦦ᆙ
ὮɿὁŘᛤះΎℋ⩂
3.1
ࡣΎߗጻᓰ⦦ᆙ
HiTi CS
֦ᦸ֦֬ᑨ᱿⥑⤺ᆯဏͧቅ᱿డ̳͐ᮢُଇ⸇᱿Ύℋ⩂Ւ̳トᖣȯ ˫⦼ͩᤫʁӬဏḻడ̳ŊଃᑨݽⳖ
⠗ɺˀ ܈᱿હቅΎŊ͗ᷨΎᑨݽטΎߗҙ᱿Ύ⩂ȯ
* ଃᅠᑨݽטΎߗҙ᱿Ύ⩂ᆯ⸅⣬᱿!! *
ॖบЭˉטΎߗ᱿ሺՖŊ⦼ՖൕᷨΎُްጁ᱿ࡠ⠗⣳᱿ᛤះΎℋ⩂᱿⣬ᖣŊ˫ד֦֬ᑨ᱿ᛤះⳕቅȯ
ॖሷ˶̬ʃࡠ⠗ὁῃ⣳હ᱿ᛤះΎℋ⩂᱿Ễ⣬ᖣŊ૽ሳ܄दᥖㆊ᱿Ύߗ
HiTi CS
֦֬ᑨଃᅠቍྈ⣬ᖣᛤះΎℋ⩂᱿֦֬ᑨʃ༫Ⴢ˶̬⪸˶ȯ
ᥖㆊᆯ֦֬ᑨҙҢ⸅⣬ُᄖȮᆞ≩ံ᱿׆˴ʠɺȯ
ᥖㆊ᱿͐ᮢउلሳߌᣅ֦֬ᑨش⳼᱿᭔ࣀ≟ഛㅨŊॖ᭔ࣀʑ᱿ᢝࢴȮ㋤ߗ㋤⫨┛֦߱ᦸʀᥖㆊȯ
͐ᮢ≛ൕㅱחɺӡᲵר⋱᱿〾ᅡŊʏʈⳖ⠗ᛤះ᱿Ւ̳ȯ
ᛤះడ̳᱿㆒᪓ُٴ⫨ᄓኞᆯೖᥖㆊ᱿͐ᮢउل˫דᷨΎ⏦॑᱿༌֬ٴ⫨᱿҅टᗉહߌ₪ȯ
˫͐ᮢ≛ൕㅱⴃભὁῃဏͧᑨݽᛤះΎℋ⩂᱿͐ᮢ⦦ᆙȯ
͐ᮢ׆ೇ᱿≩ቨ૽ሳഛㅨӬ֬᱿ٴ⫨ُרㄅඖŊⳍໞณԾ̥ٴ⫨᱿ⱚӛŊߌ≟᳅⿵᱿ഛㅨӷ֦֬ᑨ᱿డ̳ᄓ᪓ȯ
ᮟٴ᱿Ύߗጻ˴ߣʏʃծ͐ᮢ׆ೇ᱿≩ቨⳍໞ᱿˶̬᳅⿵ံࣺٴ⫨ʀ᱿ۊ㆛ȯ
13
3.2
હቅ᱿ᛤះΎ
હቅ᱿ᛤះΎ〦ӷᥖㆊ᱿ΎߗŊॖኞቍ߱⣳હ᱿ቅくҙଃᥖㆊⳖ⠗ᛤះΎŊ
Ңᥖㆊ᱿Ύߗጻᓰ૽㈸ʀदᄓȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
ㅮᲿ
ഔ⏨/܈⏨
֦ᷬ⩊૯ㆊ
ㅱᛤះᄲ
400
400
ΎߗदᄓԊሱരΪᄲᄲ
100
100
Ύߗदᄓⅶᄲ
500
500
ॖኞ֦֬ᑨ߱⨸ḻΒӛരӬ֬30֦ᦸŊⳆ⠧ḻ߱ΎߗदᄓԊŊଋሷሱര70᱿Ӭ֬ἇ⿵
14
3.2.1 ͐ᮢᛤះ֦
ᕓɺᲬHiTi CS׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᛤះ֦ᦸ a.
ẼぜⳖ֦ᐥҙԘㇷ᱿֦ᦸ
b.
ᄍ⇦қὉΎ⩂⍍⡕႖࿚᱿ᛤះ֦ᦸӷⳖ֦ᐥ
c.
ྈ”OK”⸹߱LCMӼㄇኈŊʏⴆႹӷ”Device Informatin” d. ྈ⼫ӷ”Cleaning Mode” e.
ⴃൂLCMӼㄇኈʀㆴḻ᱿⤻Ŋͩ྆ḻ͗રໞᛤះడ̳ a b c
Device Information d
Cleaning Mode
HiTi CS-200e
͐ᮢ⦦ᆙ
15
3.2.2 ሰဘᛤះញⱐ
ᕓɺᲬHiTi CS׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᄄᛤះញⱐ a.
ۓ֦֬ᑨ᱿ʀ╾Ŋʏʈחӛᛤះញⱐከ
b.
བྷ⤟ᛤះញⱐከŊʏẼぜҙ⇦᱿⾪Ⱗൔ
c.
મ⡶ҙ⇦᱿⾪Ⱗൔӷ૽Ύ⩂⍍႖࿚᱿ᛤះញⱐҙ
d.
⡶ᛤះញⱐከ
e.
ᄍߊᛤះញⱐከӷᑨݽҙ
a b c
HiTi CS-200e
͐ᮢ⦦ᆙ
old d new e
16
3.2.3 ᛤះᥖㆊ
আᛤះᥖㆊʠԊŊ⦼Ֆൕᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ ⴍ҉ᥖㆊ߱˶̬ᗼʁŊ⡕⸉଼Ȯଊ⺤༆྆Ⳗ⠗᳅⤯ᷤ
ᥖㆊُ〦ⶪ˴ະサⴍ҉טӷヅᄍヅ
ᣅʴᷨΎӬ֬᱿ٴ⫨ُẼぜᥖㆊʀᔬᮽ᱿ࣘᖛŊᯍ⏨ሰဘ᱿ᆹαଔⳖ⠗ᔍᛤះՒ̳
a.
ۓ֦֬ᑨ᱿ʀ╾Ŋᥖㆊ⡶⇦߱ʀ╾⚠
b. ⦼͐ᮢHiTi CSᛤះҙဏͧ᱿ᛤះ͗ᛤះᥖㆊ a b
HiTi CS-200e
͐ᮢ⦦ᆙ
17
Ὦ߈ὁ: ൢ֠Հ
4.1
⨸بُ⼂⦡⤻᱿⥗ᅜ
HiTi CS
֦֬ᑨᆯરҚר˫᩸⎊̳ᏈŊʏʈ⩕͐ᮢ≛Ύྃ߱ଇ⸇᱿Ⴝ̳トᖣȯ
̟ᆯଃᅠɺˀࡣ᱿ᄑゃぜ⤻᱿ʴ⤟ŊⴒᆯሷՀ᱿ȯ
4.1.1 LCM Ӽㄇኈ
ࡣ⦦ᆙ
ᮟٴⶪЈ᱿ɺΤLCMӼㄇኈŊծؐɺΤLCDㆴḻȮ߈Τྈ⸹ُқΤLEDΒ⚦ᥨ᱿ȯ
ሷ⨸بُ⼂⦡᱿⤻૽ሳഺⳆㄇኈㆴḻӛ͗ȯ
HiTi CS-200e
͐ᮢ⦦ᆙ ⲙߊӷʀɺㅮᲿ⻞
ߊӷʀɺΤⴆㅮ ӷʁɺΤⴆㅮ
ℂᥨ/ᔌ
ⳖҘʁɺㅮ᱿Ჿ⻞
ᥨ/⼂⦡
18
4.1.2 Ӽㄇᦹ᱿⨸ḻ⤻
⨸ḻ⤻
Cover Open
Flipper Cover Open
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Card Mismatch
ᑨݽʀ╾ۓ
≒ㄇᑁʀ╾ۓ
⏨ᇘᦸ֦ቍમ⡶
⏨ቍમ⡶
⏨⎞ᇘᦸʃὪ ʃᄄိᔍ⏨
ᒑው⏨Ւ̳दᄜ
⏨͐ᮢરᯃ
Ӭ֬Ւ̳दᄜ
֦ᦸ͐ᮢરᯃ
ະ⡶⇦ᤀᘍϴᛵ֦ᦸ
ᱹᮝप֦
׆ߌ
֦ᦸỚㆩʃὪ
Cam Error
Flipper Error
Ribbon Error
ᑨݽҙⵒ˴ံࣺ
≒ㄇᑁᤀᘍՒ̳
ᇘᦸᱹᮝ⼂⦡
19
〦ʀᑨݽʀ╾
〦ʀ≒ㄇᑁʀ╾
တҘ⏨ᇘᦸ֦
⡶Ҙ⏨
ᒑው⏨⎞ᇘᦸᆯ؋ㆩࠣ
ᒑው⏨Ớㆩ
⤟ᗉᅞೣ
Ҫᓝ⸅ᅘમ⡶⏨
મ⡶ᅘ⏨
⊓↙ᯍ߸⺨ۄ
ᄍ⇦ᅘ֦ᦸ
ᷨ⦓֦ᦸׂಙ⦲ᄮᆯ؋ᔌᷨ
ͩᤫㄇᦹʀ᱿֦Ễࡠ⠗Ւ̳
͐ᮢᐻCS-80֦ᦸ
⊓↙ᯍ߸⺨ۄ
⊓↙ᯍ߸⺨ۄ
⸅ᅘમ⡶ሩᅘᇘᦸ
HiTi CS-200e
͐ᮢ⦦ᆙ
4.2
Ӭ֬ᛵ⥶ߧ֦
ໟΩᣊ⩀ᮢⳖ⠗Ӭ֬ᛵ⥶ߧ֦Ŋ͗ᷨΎᑨݽᆯ؋ᔌȯ Ⳇᛵ⥶ߧ֦ሳㆴḻ ӛघỚ༬⠛⤻ُӬ֬ӛӬ֬ٴ⫨Ŋ߱ⳇ᱿ᗼʁŊⳆሷר⋱ሳ⡕ᯍ߸⺨ۄ
⦞ᶇẤ༬(HiTi Digital, Inc.)᱿઼ሺՖڂ⣬ᖣȯӬ֬ᛵ⥶ߧ֦ר˫᳅ഺLCM
Ӽㄇᦹҙ᱿CSDᲿ⻞ʁࡠ⠗ȯ ᛵ⥶ߧ֦ະ⥿ㆴḻ᱿ϳߧɺᑂȯ
4.3
ᒑ⣶㊪ՒỄમ⡶᱿ᦹ
෨ר˫ ᆞ᱿ഺ෨᱿ヅ〉ʑŊમ⡶᱿֦֬ᑨҙ᱿଼ඖⴆ܈ʑʴ⤟મ⡶᱿㊪ՒỄೣᦹȯ
⩀෨らᆹʃહቅ᱿ഺໟΩ᱿ષᅞℐἿʑʁⰶሱᅘ᱿㊪ՒỄೣᦹȯ
෨ר˫ͩᤫʁӬ᱿ᔎ㊾ʴ⤟㊪ՒỄೣમ⡶᱿ᦹ
ྈʁ̤ᅠWindowsఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠
ⴆႹ֦֬ᑨʏʈྈқʁ
֦߱֬ᑨ᱿Ჿ⻞ʑⴆႹ଼ඖ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
㊪ՒỄೣમ⡶᱿ᦹ⥑હ߱〦ᅠ᱿Ჿ⻞ҙ
HiTi CS-200e
͐ᮢ⦦ᆙ
Hiti CS-200e
20
4.4
ᄑゃぜ
4.4.1 ֦֬ᑨ᱿ᄑゃۊ㆛
ᗞሷᱹᮝ˶̬Ւ̳
Ӭ֬ӛἇᱺ֦ᦸ
ⵒ˷⼂⦡Ӭ֬
Ӭ֬ӛᬙᯮ㔄
Ӭ֬ӛᱺ⏨ᑲℬ
Ӭ֬ӛᑁߧЭ
ᒑው֦֬ᑨ᱿㊪ՒỄೣᆯ؋મ⡶ᔌᷨ
ᒑውヅُUSBℬㆊ
ᒑው⏨ُ֦ᦸ
Ӭ֬ᛵ⥶ߧ֦
ᒑው⏨
ᥖㆊሷר⋱טံ
ᒑው֦֬ᑨ᱿⥑હ
ᒑውⳐℬُ⏨
ᷨ⦓ᛤះញⱐᆯ؋ʯᛍ᱿
ᒑው֦ᦸᆯ؋ᛤះ
ᒑውᥖㆊ
֦ᦸ᱿⠧ㄇר⋱טᖸዀ
ᛤះញⱐᥖㆊר⋱טぁࢩ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᥖㆊᆯ؋טᖸዀטံ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᛤះញⱐᥖㆊᆯ؋טᖸዀ
ᒑው֦ᦸᆯ؋ʢ⣳ጁ
21
HiTi CS-200e
͐ᮢ⦦ᆙ
4.4.2 ぜप֦
ᯍप֦ᱹᮝᆹŊ⦼Ἴ֯ϟᔋӬ֬ŊͩᤫLCMӼㄇᦹ᱿྆ḻŊ૽֦̦᱿֦ᦸぜȯ
༌ᑨݽʀ╾
Ẽぜ⏨
ͩᤫLCMӼㄇᦹ᱿྆ḻⳖ⠗Ւ̳Ř⎊ՒȮ֚⎊Ւُ༆Ւ֦
Ⳗ⠗֚⎊Ւ༆Ւ֦ᆹŊ⦼խ૽෨᱿༆ᄍҘ֦֬ᑨҙ
෨ʬר˫ࡠ⠗ʁӬ⩀ʶㅮ͗ⴍ҉प֦Ř
ഺ㊪ՒỄೣُ֦ᦸׂಙ⦲ᄮጥʑŊ⥑હᔌ֦ᷨᦸׂಙ
ͩᤫ༆ҩ᱿⣳ҙૌʑŊ͐ᮢᔌᷨ᱿֦ᦸỚㆩ
ᒑ⣶͐ᮢ᱿֦ᦸᆯ؋౹ᄮ
㌂ᄣ֦ᦸŊॖኞ֦ᦸᱹᮝ㓸⫅⩽
HiTi CS-200e
͐ᮢ⦦ᆙ
22
4.5
༬⠛ᄄိ
ॖኞ෨ᱹᮝሷ˶̬ߔザ⥑હ⦲ᄮ֦֬ᑨŊ⦼˝₳〇⩊༆ҩȯ
ᯍ෨ᤀᘍ⎊⠗⤟ᗉぜۊ㆛ᆹŊ෨ר˫らᆹ⦼ᖣᯍ߸⺨ۄℋ⩂ʑൔ᱿֠Հُᄄိȯ
ᯍᤀᘍ⤟ᗉぜۊ㆛ᱹᮝᆹŊॖኞ෨ʃᵧⳬॖ̬⊓↙ᯍ߸⺨ۄℋ⩂ʑൔᆹŊ
෨ר˫⥏ۊໟΩ᱿ષℐ(
www.hiti.com)חവ⊓↙⫏⤻ʏʈໟΩဏۊȯ
ໟΩ૽ሳബ㋧⎟᱿らᆹᣅ෨ሺՖȯ
ᯍଁᖣ֠ՀᆹŊ⦼෨ൢ֠ՀဏͧʁӬ⸅⣬⫏⤻:
֦֬ᑨ᱿ࠣ⚦ُӬ⚦ᷪ
ᯍᆹ͐ᮢ᱿⥑હُヅ〉̳Ꮘ₇⃥᱿ᦹ
˝₳ᄝⲩۊ㆛᱿ᱹᮝ⳧
˝₳ᄝⲩ෨͐ᮢ˶̬᱿ᔎ㊾ᅞೣ͗ݏ⥶⤟ᗉۊ㆛
ॖኞ෨ト⣬˶̬ሩघ᱿֠ՀُൢŊ෨ר˫ഺໟΩ᱿ષℐ(
www.hiti.com)ʀחവሱᅘ᱿⫏⤻Ŋ
ծ㊪ՒỄೣȮㅊ㋤Ȯ͐ᮢ༆ҩُۊ⎞ᾊゝȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
23
え⻞A: ༬⠛⣳ጁ
ࡣㅮᲿ
Ӭ֬ᑁೣ
Ӭ֬ᄓ⋱
(֦ᦸ⥑⤺ُ⥑હሳሷ֒Ӡ)
₇⃥トᖣ
̳Ꮘ₇⃥ᄄိ
らᑨⰖ㋤
HiTi CS-200e
֦֬ᑨ
ഔ⏨Ӭ֬ᑨᐉ
300dpi
ᥖㆊ
USB
Ⳑ
ℐ⭰Ⳑ(ⴆㅮⶪЈ)(ᱹ⠗ᆹ⿵Ř2011౺Ὦɿખ)
32MB
⥆ຣ㋤ / 1MB ᇺએ⥆ຣ㋤
50 ӛ֦ᐥ(0.8mm/30mil)
қ㆗LEDᥨُ߈Τྈ⸹᱿Ӽㄇᦹ
ᥖᆒⓧഔ⏨Ӭُ֬ᥖⱧ֬܈⏨Ӭ֬ ҙ⦞ᶇ㆞⏨ᾷ ⴗӷⴗӬ֬
ᇜࠣ܈⏨≩ቨῃӬ֬
ഔ⏨Ӭ֬Ř1ㄇ(YMCKO) = ₎20ấ(߱૪㊹ા᱿ᛵ⥶᭔ࣀʑ)
܈⏨Ӭ֬Ř1ㄇ = 5ấ
IBM ヅ〉ૌŊെⰖ̳Ꮘ₇⃥2000/XP/Vista
Pentium R / 133MHz ˫ʀŊञᅠ128MB⥆ຣ㋤ُ100MBᶶᷖѲએἇ⿵
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
Macintosh OS X version 10.2/10.3/10.4/10.5/10.6
Linux
HiTi CardDésirée CS ֦ᦸ⥑હُӬ֬Ⱆ㋤ŊᄄိWindows 2000/XP/Vista/7Ŋ
ʏʈרⳐӷMS Excel⫏ᅆಝ
HiTi CS-200e
͐ᮢ⦦ᆙ
24
⏨≩ቨỚㆩ ⴆ⫵ⶪЈ
Ύߗጻ˴
Ң˟
YMCKO ഔ⏨⏨Ř400ㄇ/࿉
YMCKO
֚ኈഔ⏨⏨Ř560ㄇ/࿉
܈⏨Řሱघӷ1000ㄇ/࿉ (㓺⏨)
400
㋧ૌ⸇Ⳗ֦ᐥ
≒ㄇᑁ
ᷬጻ֦⩊૯ᑁ(ISO 7811 HiCo/LoCo or JIS2)
IC
ᇘᦸ֦⩊૯ᑁ(ISO 7816-2 / PC / SC, EMV2000-1)
⤯ೣ֦⩊૯ᑁ(ISO 14443A & B, 15693)
ℐ⭰ᑁ
ͩ⺨ڰ֒ࡍ≟ʃŊ⦼ᙛᯍ߸⺨ۄ
֦ᦸỚㆩŘPVC֦
֦ᦸ⣳ጁŘISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
֦ᦸׂಙŘ0.3mm(10mil) ~ 1.0mm(40mil); キㄇӬ֬Ř0.5mm˫ʀ
Ⳗ ֦ ᐥŘ100֦ᦸ(0.8mm/30mil)
ӛ ֦ ᐥŘ50֦ᦸ(0.8mm/30mil)
㋤ỬଙŘ198mm(W) x 355mm(L) x 219mm(H)
⸅ ⸇Ř4.9ҝᅏ
ⳐᅞೣŘUSBםℐ⭰ם(ⴆ⫵ⶪЈ)Ŋ(ʨठℐ⭰ 10/100 Mbps)
ヅ ŘAC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A
Ⴝ̳᭔ࣀŘ15~32ಙ / 20%~85% ଃಙ
Ѳએ᭔ࣀŘ-20~60ಙ / 20%~90% ଃಙ
డ̳᭔ࣀŘⳇㆺ᱿ᄍἇ⿵
HiTi CS-200e
͐ᮢ⦦ᆙ
25
⊖ᆙ
Ὦɺὁ: Јআ
1.1
ᒑ⣶ҙૌ
1.2
༌֬ᑨक⤐Լ⋱
1.3
મ⡶ᅞೣ
֦ᦸᄇゝ
֦ᦸ⦲ᄮ
Ὦʷὁ: ༌֬
2.1
મ⡶㊪ՒⰖ㋤
2.2
༌֬⥑હ
2.3
༌֬ະᮢⰖ㋤
Ὦɿὁ: ᛤះΎℋ⩂
3.1
ࡣΎߗጻᓰ⦦ᆙ
3.2
હቅ᱿ᛤះΎ
Ὦ߈ὁ: ൢ֠Հ
4.1
⨸بُ⼂⦡⤻᱿⥗ᅜ
4.2
༌֬ᛵ⥶ߧ֦
4.3
ᒑ⣶㊪ՒỄೣમ⡶᱿ᦹ
4.4
ᄑゃぜ
4.5
༬⠛ᄄိ
え⻞A: ༬⠛⣳ጁ
HiTi CS-200e
͐ᮢ⦦ᆙ
13
14
18
18
10
11
12
13
20
20
21
23
24
06
09
09
10
01
03
03
04
HiTi CS-200e
͐ᮢ⦦ᆙ
HiTii CS Card Printer ©2011
౺ȯ ᦹᓏሷȯ
͐ᮢ≛ൕㅱ⸅Ң߱ߡሷ〦ᦹᓏ᱿⠗⣳હȯ ͐ᮢ༆ҩ߱ቍ⳧⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)ᆙᷨ᱿ሬ
ㄇ࿙ᓏ˫Ԋʃവ˫˶᮫̬Ȯ˶̬ᅞೣ⡕ⵒ˷Қⵒ⢒⢌Ȯ⢒֬Ȯ≒⨿ȮЗႩŊᤀ⧄ᆯヅઈᦹȮᄽᦹ˫˶̬ࠣೣ
᱿ᅞೣاȯ
༆ҩҙծؐ᱿˶̬ΒȮᄽ˴ᄽॖሷ⩐ሩŊපʃנ⠗ⳇᵧȯ
⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)ʃଃ༆ҩʑר⋱ሳӛ᱿⼂⦡≟༫Ⴢ˶̬⪸˶Ŋʬʃଃяݽาकံᕇߌ༆
ҩҙૌ⦦ᆙ≟ⳍໞ᱿ံद⪭⪸ȯ
HiTi CS Card Printer
ᆯ⦞ᶇẤ༬⊵˷ሷくҝ(HiTi Digital, Inc.)᱿ɺΤٴᦽŊሷҢ˟᱿ۄᐻᲀરໞ଼ᅠ˟Ω׳⎊᱿
ᮟᓏሷ≛ȯ
〦ᅠ֦֬ᑨ᱿ΎΔ᱿ጻ˴ُくӼጻᓰŊ⦼א≙ᮟٴᾼҙえԽ᱿ΎΔ⦦ᆙ֦ȯ
01
HiTi CS-200e
͐ᮢ⦦ᆙ
⨀෨ⴆႹ᱿HiTi CS ֦֬ᑨŊʏʈଭʴキᅞ᱿ໞԼ〦ȯ
ᅘ᱿֦֬ᑨר˫⩕෨ˉט ᆞ᱿Ⴝ̳Ŋᆹʬ⩕෨⢌̳ӛ㋧༌֬᱿ٴ⫨߱׳ỚΤඖջ᱿⨢֦ȮΒᮢ֦Ȯሳڂُ֦൏ὁ
֦߱ᦸʀ᱿ະᮢȯ ⦼ᷨΎ෨͐ᮢ׆ೇဏͧ᱿≩ቨٴُⶪ˴ȯ
ᓥʴ⤟ሩघ᱿ΒŊ⦼⥏ۊໟΩ᱿ℐἿ:
www.hiti.com .
⦼ᮢɺ㔄ᆹ⿵ʀℐ(www.hiti.com)⥘ҩ֦֬ᑨ᱿ΎߗŊᯍરໞ⥘ҩʠരŊໟΩ૽ሳᩦզ෨ϝᣅߊ㈘ȯ
༆ҩ᱿Ჿ᱿ᆯՀ෨Ⳁᔎ᱿ʴ⤟෨᱿֦֬ᑨ᱿⥑હȯ ߱আ͐ᮢԊŊ⦼˝₳〇⩊͐ᮢ༆ҩŊʴ⤟ӷ֦֬ᑨُ᱿Լ
⋱ŊⳆ૽ሳՀُῃ෨મ⡶ُ͐ᮢ᱿ᆹ⿵ȯ ॖኞ෨ᱹҙૌʑሷ⼂⦡Ŋ⦼ᱹⲶヅઈⵞ˴ⳇᵧໟΩ
ʁӬ᱿ߧᐻଅ༆૽⠧ḻ༆ҩʑ᱿⸅⣬Β
᧚Ӳ⨸ḻ᱿بḻ ሩघᆙُᷨⳖɺᔎ᱿Β
02
1.1
ᒑ⣶ҙૌ
෨᱿֦֬ᑨらᾼえɺˀⶪ˴Ŋ⦼෨␕ɺ㔄ᆹ⿵˝₳᱿ᒑውȯ
ᔍ֦֬ᑨᾼ⡹᱿ҙૌŊר⋱ߌᣅ෨߱᱿֒ࡍʃ≟ሷ⩐ջȯ
ॖኞʁӬ˶̬ɺㅮٴሷᵬ⇃Ŋ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
ॖኞㅱ⣬ʴ⤟઼ሺՖʑൔ᱿⫏⤻Ŋ⦼א≙༆ҩえ⻞
C:
઼ሺՖ⫏⤻
HiTi CS-200e
͐ᮢ⦦ᆙ ⲵӛ֦ᐥ ⶪ⸅֦
USB
ℬ ヅ⡶⇦ ヅℬ
͐ᮢ༆ҩ મ⡶҆Ჷ ᛤះញⱐ
03
らᑨ ᆞᛤះ
1.2 ༌֬ᑨक⤐Լ⋱˛₺ ʀ╾〦ྈ⸹
LCM
Ӽㄇኈ
༆ՒⳖ֦⚠
04
HiTi CS-200e
͐ᮢ⦦ᆙ
Ⳗ֦ᐥ╾
Ⳗ֦ᐥ(100֦)
༆Ւ֦ઋ(֓➦⃦⬚ઈ)
ᮟٴᐻ
ヅ〦ྈ⸹
USB
ם
ヅם
ი҂ೣℐ⭰םᑁ
ი҂ೣᇘᦸ⩊૯ᑁ
ᥖㆊ
⏨࿉ᄍ⇦⚠(㆞⏨֒Ӡ)
⏨ᇘᦸတᐥ
HiTi CS-200e
͐ᮢ⦦ᆙ
֦ᦸׂಙ⦲ᄮጥ
ᛤះញⱐᄍ⇦⚠
05
HiTi CS-200e
͐ᮢ⦦ᆙ
1.3 મ⡶ᅞೣ
1.3.1
⏨મ⡶
͐ᮢ׆ೇHiTi CS֦֬ᑨဏͧ᱿⏨Ŋ૽ሳᷨΎ֦֬ᑨ᱿ᄓ⋱Ȯٴ⫨ُⴍ҉ⳍໞ˶̬〦᱿ံࣺȯ
͐ᮢ˶̬׆ೇ᱿⏨Ŋ૽ሳ܄दΎߗ᱿ᓏᲩȯ
ᷨΎሱ̈́ջ᱿Ӭ֬ᄓ⋱Ŋ⦼߱ᕓᓝሩဘ⏨᱿ᆹŊ͐ᮢᛤះ֦ȯ ͐ᮢᅞೣ⦼א≙༆ҩҙ᱿ᛤះ⎞Ύὁῃȯ
a.
༌ʀ╾
b.
တҘᇘᦸ֦⎏⏨ᇘᦸတᐥ
c.
ͩߧḻમ⡶⏨
⦼ᷨΎ⏨ỚㆩُᇘᦸᐻḻὪ
⦼ᷨΎમ⡶⏨ᆹŊ⏨⍍ଶʀʏʈᷨ⦓⏨࿉Ⱗ᱿㆞⏨⎞⏨ᄍ⇦⚠
d.
૽ʀ╾〦ʀ᳅ӷ⊖ㅨᔋ
a b c d
06
HiTi CS-200e
͐ᮢ⦦ᆙ
1.3.2
USB
)
ヅ
a.
Ⳑヅℬӷヅ⡶⇦ŊᤋരⳐヅℬӷ֦֬ᑨὉ᱿ヅם
b.
Ⳑヅӷሷ߸ℬ᱿ヅͧະတಚ
⦼ᷨΎヅℬᆯⳐӷሷ६ۧΎ⩂ُ߸᱿ヅͧະ⚠
c.
ۓ֦֬ᑨὉ᱿ヅ〦Ŋ⦼ᷨ⦓LCMӼㄇኈㆴḻ”Ready”Ŋ͗ᷨΎᑨݽ߱ഩᑨᨊ๗
ᣅʴᷨΎ෨⎊⯿᱿મҚŊ߱ࡠ⠗˶̬ሷ〦ᑨݽ᱿ΎℋΔ᱿Ւ̳ԊŊ⦼ᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗
a b c d
Ready
USB
߱ⳐUSBℬӷ֦֬ᑨԊŊ⦼ᷨΎ֦֬ᑨ᱿㊪ՒⰖ㋤રҚ᱿⡕મ⡶રᯃ
⦼א≙༆ҩҙ᱿֦֬ᑨ㊪ՒⰖ㋤᱿મ⡶ᅞೣŊʏ˝₳᱿ͩᤫᔎ㊾Ⳗ⠗ȯ
07
HiTi CS-200e
͐ᮢ⦦ᆙ
ᣅʴሱ̈́ջ᱿ٴ⫨Ŋ⦼͐ᮢCR-80ُISO 7810ᐻ⣳ҙ᱿֦ᦸ͗༌֬
⦼խ⤯ႄ֦ᦸ᱿༌֬ㄇŊُⴍ҉͐ᮢ˶̬㋢ᖸȮטံȮ≒༿ُሷә᱿֦ᦸ͗Ⳗ⠗༌֬Ւ̳
a.
༌Ⳗ֦ᐥ᱿ʀ╾
b.
ͩߧḻᄍ⇦ʃỚㆩ᱿֦ᦸӷⳖ֦ᐥŊʏʈᄍҘⶪ⸅֦֦߱ᦸʀᅞ
c.
〦ʀⳖ֦ᐥ᱿ʀ╾
a b c a
Ⳇㅮ᧚ᔢ᱿⥑⤺ᆯᣅʴⳖ⠗܈֦တҘ༌֬⩊૯᱿Ւ̳
a.
ͩߧḻŊ༆ՒတҘ֦ᦸӷ༆ՒⳖ֦ᐥ
b.
আࡠ⠗༌֬⩊૯᱿Ւ̳
08
ᯍ༌֬⩊૯Ւ̳રໞᆹŊҢ֦ᦸ૽ሳ⡕ⲵ⎏ⲵӛ֦ᐥŊ
ሱघר˫ૌₗ500.8mmଙ᱿֦ᦸ
֦֬ᑨⶪሷ༆Ւ⦲ᄮ֦ᦸׂಙ᱿⡶⇦Ŋᯍʀ╾⡕ۓᆹŊҢ⡶⇦̤߱ᑨݽҙⵒȯ
֦ᦸׂಙ᱿ߣ᮫0.3mmӷ1.0mm᱿ଙŊ≟ӛೇ⥑હᆯ߱0.8mm᱿ׂಙȯ a.
༌ᑨݽʀ╾
b.
ͩト͐ᮢ֦ᦸ᱿ׂಙŊͩఢ⦲ᄮ֦ᦸׂಙ⦲ᄮጥ⎏ᔌᷨ᱿⥑હ
c.
〦ʀᑨݽʀ╾
a b c
HiTi CS-200e
͐ᮢ⦦ᆙ
09
HiTi CS-200e
͐ᮢ⦦ᆙ
2.1
મ⡶㊪ՒⰖ㋤
ᣅʴ෨⎊⯿મҚŊ߱ࡠ⠗˶̬ᑨݽΎℋΔՒ̳ԊŊ⦼ᷨΎヅℬ⚠ᅠቍⳐ᱿ᨊ๗
߱͐ᮢᮟٴԊŊଃᅠᔌᷨ᱿⥑હُᔌᷨ᱿મ⡶㊪ՒⰖ㋤ᆯɺㅮ⸅⣬᱿Ւ̳Ŋト⣬͐ᮢ≛⃛ʵ᧚Ӳ᱿ᘜาُ〦ᘜȯ ʃᔌᯍ᱿͐ᮢȮႽُ̳㊪ՒⰖ㋤મ⡶ᆯሳഛㅨӷ༌֬ٴ⫨᱿⸅⣬ߌ₪ʠɺȯ
ߌᔍŊྈⵒଔⳖ⠗મ⡶ُႽ̳Ŋᷨᄊ⩐〦⥑હאᄲᆯ⸅⣬᱿ȯ
ॖኞ˶̬⦲ᄮቍⳭӷㅷቅ᱿⠧ŊໟΩʬဏͧ෨૽֦֬ᑨുӷӛೇᆹ᱿׆͗⥑હϊ᱿⥑હᅞೣȯ
ᮟٴဏͧમ⡶҆ᲷʑծWindowsُMac౹שト᱿㊪ՒⰖ㋤ȯ
ॖኞҙૌ⇃ଇમ⡶҆ᲷŊ⦼߱Ὦɺᆹ⿵ُ෨ᯍ߸᱿⺨ۄ⊓↙ȯ
ॖኞㅱ⣬ʴ⤟઼ሺՖʑൔ᱿⫏⤻Ŋ⦼א≙༆ҩえ⻞
C:
઼ሺՖ⫏⤻
મ⡶֦֬ᑨ᱿㊪ՒⰖ㋤ᆹŊ⦼҅૽મ⡶ᲷᄍҘ⤺ᾰᑨʑ᱿҆Ჷᑨ⡶⇦ŊⴆႹ֦֬ᑨ㊪ՒⰖ㋤᱿Ჿ⻞ȯ
෨૽ሳ߱⎊Ւમ⡶Ễೣ᱿೧ʁરໞ㊪ՒⰖ㋤᱿મ⡶ȯ
ⳐUSBℬᆹŊ⦼ͩᤫ༆ҩҙ⥆ⰶ᱿USBℬ᱿Ⳑᅞೣ͗Ⳗ⠗ᔌᷨ᱿Ⳑ
ሷˀWindowsُMac᱿ᦹŊト⣬મ⡶㊪ՒⰖ㋤᱿ᮢңሷ⤺ᾰᑨᾷڂ᱿ᓏく
10
HiTi CS-200e
͐ᮢ⦦ᆙ
2.2 ༌֬⥑હ
͐ᮢ֦֬ᑨԊŊ⦼ൕㅱࡠ⠗ᷨ⦓ሩᄊ׆҅㓿⦓᱿⥑હȯ
Ⳇˀ⥑હծؐʁӬ᱿ⴆㅮ:
⏨Ớㆩ ֦ᦸỚㆩ ֦ᦸׂಙ Ң
⦼ᘜาُᮽา㊪ՒỄೣҙ᱿˶̬⥑હŊॖʃᷨહŊ߱ϝ˶̬ΔᄊԊŊ⦼ُ෨ᯍ߸᱿⺨ۄ⊓↙ʏחവՀȯ
ͩᤫʁӬ᱿ᔎ㊾רⳖҘӷӬ֬᱿⥑હ
ྈʁ̤ᅠWindowsఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠
ⴆႹ֦֬ᑨʏʈྈқʁ
֦߱֬ᑨ᱿Ჿ⻞ʑⴆႹ଼ඖ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
⥑⇦⥑હ᱿Ჿ⻞ሷŘ⥑હⴆㅮȮ༌֬ߣȮ㆞⏨ȮడңȮ֦ᷬ⩊૯Ȯֈӛ/Ҙُ〦ᅠ
ሱ͐ᮢ᱿༌֬⥑હᲿ⻞ሷŘ⥑હⴆㅮȮ㆞⏨ُడң
⥑હⴆㅮ
⏨Ớㆩ
֦ᦸỚㆩ
֦ᦸׂಙ
ᔌ/וㄇߧ
༌֬
͐ᮢResin K
㆞⏨
㆞⏨۹॑⥑હ
᧚Ӳ⥑હ
㆞⏨⦲ᄮ
11
డң
༌̤֬⇦⥑હ
ᛤះడңⴆㅮ
Ύℋ⩂⫏⤻
Ⳗべ⥑હ
Խᥖ⋱⸇⥑હ
2.3 ༌֬ະᮢⰖ㋤
ᮟٴらᑨえ⫾Խϊ᱿༌֬ະᮢⰖ㋤”CardDésirée CS”ȯ
Ⳇह ᆞُ͐ᮢᅞ͵᱿ະᮢⰖ㋤Ŋ⩕͐ᮢ≛᳅⥑⤺֦ᦸʀบ༌֬᱿ߧጊ⫏ᅆȯ
ॖトሩⳖɺᔎ᱿ʴ⤟Ŋ⦼᳅א≙મ⡶҆Ჷҙ᱿⫏⤻ȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
12
HiTi CS-200e
͐ᮢ⦦ᆙ
3.1
ࡣΎߗጻᓰ⦦ᆙ
HiTi CS
֦ᦸ֦֬ᑨ᱿⥑⤺ᆯဏͧቅ᱿డ̳͐ᮢُଇ⸇᱿Ύℋ⩂Ւ̳トᖣȯ ˫⦼ͩᤫʁӬဏḻడ̳ŊଃᑨݽⳖ
⠗ɺˀ ܈᱿હቅΎŊ͗ᷨΎᑨݽטΎߗҙ᱿Ύ⩂ȯ
* ଃᅠᑨݽטΎߗҙ᱿Ύ⩂ᆯ⸅⣬᱿!! *
ॖบЭˉטΎߗ᱿ሺՖŊ⦼ՖൕᷨΎُްጁ᱿ࡠ⠗⣳᱿ᛤះΎℋ⩂᱿⣬ᖣŊ˫ד֦֬ᑨ᱿ᛤះⳕቅȯ
ॖሷ˶̬ʃࡠ⠗ὁῃ⣳હ᱿ᛤះΎℋ⩂᱿Ễ⣬ᖣŊ૽ሳ܄दᥖㆊ᱿Ύߗ
HiTi CS
֦֬ᑨଃᅠቍྈ⣬ᖣᛤះΎℋ⩂᱿֦֬ᑨʃ༫Ⴢ˶̬⪸˶ȯ
ᥖㆊᆯ֦֬ᑨҙҢ⸅⣬ُᄖȮᆞ≩ံ᱿׆˴ʠɺȯ
ᥖㆊ᱿͐ᮢउلሳߌᣅ֦֬ᑨش⳼᱿᭔ࣀ≟ഛㅨŊॖ᭔ࣀʑ᱿ᢝࢴȮ㋤ߗ㋤⫨┛֦߱ᦸʀᥖㆊȯ
͐ᮢ≛ൕㅱחɺӡᲵר⋱᱿〾ᅡŊʏʈⳖ⠗ᛤះ᱿Ւ̳ȯ
ᛤះడ̳᱿㆒᪓ُٴ⫨ᄓኞᆯೖᥖㆊ᱿͐ᮢउل˫דᷨΎ⏦॑᱿༌֬ٴ⫨᱿҅टᗉહߌ₪ȯ
˫͐ᮢ≛ൕㅱⴃભὁῃဏͧᑨݽᛤះΎℋ⩂᱿͐ᮢ⦦ᆙȯ
͐ᮢ׆ೇ᱿≩ቨ૽ሳഛㅨ༌֬᱿ٴ⫨ُרㄅඖŊⳍໞณԾ̥ٴ⫨᱿ⱚӛŊߌ≟᳅⿵᱿ഛㅨӷ֦֬ᑨ᱿డ̳ᄓ᪓ȯ
ᮟٴ᱿Ύߗጻ˴ߣʏʃծ͐ᮢ׆ೇ᱿≩ቨⳍໞ᱿˶̬᳅⿵ံࣺٴ⫨ʀ᱿ۊ㆛ȯ
13
3.2
હቅ᱿ᛤះΎ
હቅ᱿ᛤះΎ〦ӷᥖㆊ᱿ΎߗŊॖኞቍ߱⣳હ᱿ቅくҙଃᥖㆊⳖ⠗ᛤះΎŊ
Ңᥖㆊ᱿Ύߗጻᓰ૽㈸ʀदᄓȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
ㅮᲿ
ഔ⏨/܈⏨
֦ᷬ⩊૯ㆊ
ㅱᛤះᄲ
400
400
ΎߗदᄓԊሱരΪᄲᄲ
100
100
Ύߗदᄓⅶᄲ
500
500
ॖኞ֦֬ᑨ߱⨸ḻΒӛര༌֬30֦ᦸŊⳆ⠧ḻ߱ΎߗदᄓԊŊଋሷሱര70᱿༌֬ἇ⿵
14
ᕓɺᲬHiTi CS׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᛤះ֦ᦸ a.
ẼぜⳖ֦ᐥҙԘㇷ᱿֦ᦸ
b.
ᄍ⇦қὉΎ⩂⍍⡕႖࿚᱿ᛤះ֦ᦸӷⳖ֦ᐥ
c.
ྈ”OK”⸹߱LCMӼㄇኈŊʏⴆႹӷ”Device Informatin” d. ྈ⼫ӷ”Cleaning Mode” e.
ⴃൂLCMӼㄇኈʀㆴḻ᱿⤻Ŋͩ྆ḻ͗રໞᛤះడ̳ a b c
Device Information d
Cleaning Mode
HiTi CS-200e
͐ᮢ⦦ᆙ
15
ᕓɺᲬHiTi CS׆ೇ᱿≩ቨҙŊ૽ሳえ⫾ɺᄄᛤះញⱐ a.
ۓ֦֬ᑨ᱿ʀ╾Ŋʏʈחӛᛤះញⱐከ
b.
བྷ⤟ᛤះញⱐከŊʏẼぜҙ⇦᱿⾪Ⱗൔ
c.
મ⡶ҙ⇦᱿⾪Ⱗൔӷ૽Ύ⩂⍍႖࿚᱿ᛤះញⱐҙ
d.
⡶ᛤះញⱐከ
e.
ᄍߊᛤះញⱐከӷᑨݽҙ
a b c old d new e
HiTi CS-200e
͐ᮢ⦦ᆙ
16
আᛤះᥖㆊʠԊŊ⦼Ֆൕᷨ⦓ヅတㆊᆯ⡕ཥぜ᱿ᨊ๗ ⴍ҉ᥖㆊ߱˶̬ᗼʁŊ⡕⸉଼Ȯଊ⺤༆྆Ⳗ⠗᳅⤯ᷤ
ᥖㆊُ〦ⶪ˴ະサⴍ҉טӷヅᄍヅ
ᣅʴᷨΎ༌֬᱿ٴ⫨ُẼぜᥖㆊʀᔬᮽ᱿ࣘᖛŊᯍ⏨ሰဘ᱿ᆹαଔⳖ⠗ᔍᛤះՒ̳
a.
ۓ֦֬ᑨ᱿ʀ╾Ŋᥖㆊ⡶⇦߱ʀ╾⚠
b. ⦼͐ᮢHiTi CSᛤះҙဏͧ᱿ᛤះ͗ᛤះᥖㆊ a b
HiTi CS-200e
͐ᮢ⦦ᆙ
17
4.1 ⨸بُ⼂⦡⤻᱿⥗ᅜ
HiTi CS
֦֬ᑨᆯરҚר˫᩸⎊̳ᏈŊʏʈ⩕͐ᮢ≛Ύྃ߱ଇ⸇᱿Ⴝ̳トᖣȯ
̟ᆯଃᅠɺˀࡣ᱿ᄑゃぜ⤻᱿ʴ⤟ŊⴒᆯሷՀ᱿ȯ
4.1.1 LCM
Ӽㄇኈ
ࡣ⦦ᆙ
ᮟٴⶪЈ᱿ɺΤLCMӼㄇኈŊծؐɺΤLCDㆴḻȮ߈Τྈ⸹ُқΤLEDΒ⚦ᥨ᱿ȯ
ሷ⨸بُ⼂⦡᱿⤻૽ሳഺⳆㄇኈㆴḻӛ͗ȯ ⲙߊӷʀɺㅮᲿ⻞
ߊӷʀɺΤⴆㅮ ӷʁɺΤⴆㅮ
ℂᥨ/ᔌ
ⳖҘʁɺㅮ᱿Ჿ⻞
ᥨ/⼂⦡
HiTi CS-200e
͐ᮢ⦦ᆙ
18
4.1.2 Ӽㄇᦹ᱿⨸ḻ⤻
⨸ḻ⤻
Cover Open
Flipper Cover Open
IC Chip Missing
Ribbon Missing
Ribbon Mismatch
Ribbon Type Error
Ribbon Out
Print Fail
Card Out
Card Jam
Card Mismatch
Cam Error
Flipper Error
Ribbon Error
ᑨݽʀ╾ۓ
≒ㄇᑁʀ╾ۓ
⏨ᇘᦸ֦ቍમ⡶
⏨ቍમ⡶
⏨⎞ᇘᦸʃὪ ʃᄄိᔍ⏨
ᒑው⏨Ւ̳दᄜ
⏨͐ᮢરᯃ
Ӭ֬Ւ̳दᄜ
֦ᦸ͐ᮢરᯃ
ະ⡶⇦ᤀᘍϴᛵ֦ᦸ
ᱹᮝप֦
׆ߌ
֦ᦸỚㆩʃὪ
ᑨݽҙⵒ˴ံࣺ
≒ㄇᑁᤀᘍՒ̳
ᇘᦸᱹᮝ⼂⦡
19
〦ʀᑨݽʀ╾
〦ʀ≒ㄇᑁʀ╾
တҘ⏨ᇘᦸ֦
⡶Ҙ⏨
ᒑው⏨⎞ᇘᦸᆯ؋ㆩࠣ
ᒑው⏨Ớㆩ
⤟ᗉᅞೣ
Ҫᓝ⸅ᅘમ⡶⏨
મ⡶ᅘ⏨
⊓↙ᯍ߸⺨ۄ
ᄍ⇦ᅘ֦ᦸ
ᷨ⦓֦ᦸׂಙ⦲ᄮᆯ؋ᔌᷨ
ͩᤫㄇᦹʀ᱿֦Ễࡠ⠗Ւ̳
͐ᮢᐻCS-80֦ᦸ
⊓↙ᯍ߸⺨ۄ
⊓↙ᯍ߸⺨ۄ
⸅ᅘમ⡶ሩᅘᇘᦸ
HiTi CS-200e
͐ᮢ⦦ᆙ
4.2 ༌֬ᛵ⥶ߧ֦
ໟΩᣊ⩀ᮢⳖ⠗༌֬ᛵ⥶ߧ֦Ŋ͗ᷨΎᑨݽᆯ؋ᔌȯ Ⳇᛵ⥶ߧ֦ሳㆴḻ ӛघỚ༬⠛⤻ُ༌֬ӛӬ֬ٴ⫨Ŋ߱ⳇ᱿ᗼʁŊⳆሷר⋱ሳ⡕ᯍ߸⺨ۄ
⦞ᶇẤ༬(HiTi Digital, Inc.)᱿઼ሺՖڂ⣬ᖣȯ༌֬ᛵ⥶ߧ֦ר˫᳅ഺLCM
Ӽㄇᦹҙ᱿CSDᲿ⻞ʁࡠ⠗ȯ ᛵ⥶ߧ֦ະ⥿ㆴḻ᱿ϳߧɺᑂȯ
4.3 ᒑ⣶㊪ՒỄમ⡶᱿ᦹ
෨ר˫ ᆞ᱿ഺ෨᱿⤺ᾰᑨʑŊમ⡶᱿֦֬ᑨҙ᱿଼ඖⴆ܈ʑʴ⤟મ⡶᱿㊪ՒỄᦹȯ
⩀෨らᆹʃહቅ᱿ഺໟΩ᱿ષᅞℐἿʑʁⰶሱᅘ᱿㊪ՒỄᦹȯ
෨ר˫ͩᤫʁӬ᱿ᔎ㊾ʴ⤟㊪ՒỄમ⡶᱿ᦹ
ྈʁ̤ᅠWindowsఢʁᅞ᱿আŊⴆႹ֦֬ᑨُЗ᳠
ⴆႹ֦֬ᑨʏʈྈқʁ
֦߱֬ᑨ᱿Ჿ⻞ʑⴆႹ଼ඖ ӛɺΤ⥑⇦⥑હ᱿ଅ➔ౡ
㊪ՒỄમ⡶᱿ᦹ⥑હ߱〦ᅠ᱿Ჿ⻞ҙ
HiTi CS-200e
͐ᮢ⦦ᆙ
Hiti CS-200e
20
4.4 ᄑゃぜ
ᗞሷᱹᮝ˶̬Ւ̳
༌֬ӛἇᱺ֦ᦸ
ⵒ˷⼂⦡༌֬
༌֬ӛᬙᯮ㔄
༌֬ӛᱺ⏨ᑲℬ
༌֬ӛᑁߧЭ
ᒑው֦֬ᑨ᱿㊪ՒỄೣᆯ؋મ⡶ᔌᷨ
ᒑውヅُUSBℬㆊ
ᒑው⏨ُ֦ᦸ
༌֬ᛵ⥶ߧ֦
ᒑው⏨
ᥖㆊሷר⋱טံ
ᒑው֦֬ᑨ᱿⥑હ
ᒑውⳐℬُ⏨
ᷨ⦓ᛤះញⱐᆯ؋ʯᛍ᱿
ᒑው֦ᦸᆯ؋ᛤះ
ᒑውᥖㆊ
֦ᦸ᱿⠧ㄇר⋱טᖸዀ
ᛤះញⱐᥖㆊר⋱טぁࢩ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᥖㆊᆯ؋טᖸዀטံ
ᒑው⏨ᆯ؋મ⡶ᔌᷨ
ᒑውᛤះញⱐᥖㆊᆯ؋טᖸዀ
ᒑው֦ᦸᆯ؋ʢ⣳ጁ
21
HiTi CS-200e
͐ᮢ⦦ᆙ
4.4.2 ぜप֦
ᯍप֦ᱹᮝᆹŊ⦼Ἴ֯ϟᔋ༌֬ŊͩᤫLCMӼㄇᦹ᱿྆ḻŊ૽֦̦᱿֦ᦸぜȯ
༌ᑨݽʀ╾
Ẽぜ⏨
ͩᤫLCMӼㄇᦹ᱿྆ḻⳖ⠗Ւ̳Ř⎊ՒȮ֚⎊Ւُ༆Ւ֦
Ⳗ⠗֚⎊Ւ༆Ւ֦ᆹŊ⦼խ૽෨᱿༆ᄍҘ֦֬ᑨҙ
෨ʬר˫ࡠ⠗ʁӬ⩀ʶㅮ͗ⴍ҉प֦Ř
ഺ㊪ՒỄೣُ֦ᦸׂಙ⦲ᄮጥʑŊ⥑હᔌ֦ᷨᦸׂಙ
ͩᤫ༆ҩ᱿⣳ҙૌʑŊ͐ᮢᔌᷨ᱿֦ᦸỚㆩ
ᒑ⣶͐ᮢ᱿֦ᦸᆯ؋౹ᄮ
㌂ᄣ֦ᦸŊॖኞ֦ᦸᱹᮝ㓸⫅⩽
HiTi CS-200e
͐ᮢ⦦ᆙ
22
4.5 ༬⠛ᄄိ
ॖኞ෨ᱹᮝሷ˶̬ߔザ⥑હ⦲ᄮ֦֬ᑨŊ⦼˝₳〇⩊༆ҩȯ
ᯍ෨ᤀᘍ⎊⠗⤟ᗉぜۊ㆛ᆹŊ෨ר˫らᆹ⦼ᖣᯍ߸⺨ۄℋ⩂ʑൔ᱿֠Հُᄄိȯ
ᯍᤀᘍ⤟ᗉぜۊ㆛ᱹᮝᆹŊॖኞ෨ʃᵧⳬॖ̬⊓↙ᯍ߸⺨ۄℋ⩂ʑൔᆹŊ෨ר˫⥏ۊ
ໟΩ᱿ષℐ(www.hiti.com)חവ⊓↙⫏⤻ʏʈໟΩဏۊȯ
ໟΩ૽ሳബ㋧⎟᱿らᆹᣅ෨ሺՖȯ
ᯍଁᖣ֠ՀᆹŊ⦼෨ൢ֠ՀဏͧʁӬ⸅⣬⫏⤻:
֦֬ᑨ᱿ࠣ⚦ُӬ⚦ᷪ
ᯍᆹ͐ᮢ᱿⥑હُヅ〉̳Ꮘ₇⃥᱿ᦹ
˝₳ᄝⲩۊ㆛᱿ᱹᮝ⳧
˝₳ᄝⲩ෨͐ᮢ˶̬᱿ᔎ㊾ᅞೣ͗ݏ⥶⤟ᗉۊ㆛
ॖኞ෨ト⣬˶̬ሩघ᱿֠ՀُൢŊ෨ר˫ഺໟΩ᱿ષℐ(www.hiti.com)ʀחവሱᅘ᱿⫏⤻Ŋ
ծ㊪ՒỄȮㅊ㋤Ȯ͐ᮢ༆ҩُۊ⎞ᾊゝȯ
HiTi CS-200e
͐ᮢ⦦ᆙ
23
え⻞A: ༬⠛⣳ጁ
ࡣㅮᲿ
༌֬ᑁೣ
༌֬ᄓ⋱
(֦ᦸ⥑⤺ُ⥑હሳሷ֒Ӡ)
₇⃥トᖣ
̳Ꮘ₇⃥ᄄိ
らᑨⰖ㋤
Hiti CS-200e
֦֬ᑨ
ഔ⏨༌֬ᑨᐉ
300dpi
ᥖㆊ
USB
Ⳑ
ℐ⭰Ⳑ(ⴆㅮⶪЈ)(ᱹ⠗ᆹ⿵Ř2011౺Ὦɿખ)
32MB
⥆ຣ㋤ / 1MB ᇺએ⥆ຣ㋤
50 ӛ֦ᐥ(0.8mm/30mil)
қ㆗LEDᥨُ߈Τྈ⸹᱿Ӽㄇᦹ
ᥖᆒⓧഔ⏨Ӭُ֬ᥖⱧ֬܈⏨༌֬ ҙ⦞ᶇ㆞⏨ᾷ ⴗӷⴗ༌֬
ᇜࠣ܈⏨≩ቨῃ༌֬
ഔ⏨༌֬Ř1ㄇ(YMCKO) = ₎20ấ(߱૪㊹ા᱿ᛵ⥶᭔ࣀʑ)
܈⏨༌֬Ř1ㄇ = 5ấ
IBM ヅ〉ૌŊെⰖ̳Ꮘ₇⃥2000/XP/Vista
Pentium R / 133MHz ˫ʀŊञᅠ128MB⥆ຣ㋤ُ100MBᶶᷖѲએἇ⿵
Windows 2000/XP/Vista/Windows 7 (32 & 64 bits)
Macintosh OS X version 10.2/10.3/10.4/10.5/10.6
Linux
Hiti CardDésirée CS ֦ᦸ⥑હُ༌֬Ⱆ㋤ŊᄄိWindows 2000/XP/Vista/7Ŋ
ʏʈרⳐӷMS Excel⫏ᅆಝ
HiTi CS-200e
͐ᮢ⦦ᆙ
24
⏨≩ቨỚㆩ ⴆ⫵ⶪЈ
Ύߗጻ˴
Ң˟
YMCKO ഔ⏨⏨Ř400ㄇ/࿉
YMCKO
֚ኈഔ⏨⏨Ř560ㄇ/࿉
܈⏨Řሱघӷ1000ㄇ/࿉ (㓺⏨)
400
㋧ૌ⸇Ⳗ֦ᐥ
≒ㄇᑁ
ᷬጻ֦⩊૯ᑁ(ISO 7811 HiCo/LoCo or JIS2)
IC
ᇘᦸ֦⩊૯ᑁ(ISO 7816-2 / PC / SC, EMV2000-1)
⤯ೣ֦⩊૯ᑁ(ISO 14443A & B, 15693)
ℐ⭰ᑁ
ͩ⺨ڰ֒ࡍ≟ʃŊ⦼ᙛᯍ߸⺨ۄ
֦ᦸỚㆩŘPVC֦
֦ᦸ⣳ጁŘISO CR-80 / ISO 7810 (53.98mm x 85.60mm)
֦ᦸׂಙŘ0.3mm(10mil) ~ 1.0mm(40mil); キㄇ༌֬Ř0.5mm˫ʀ
Ⳗ ֦ ᐥŘ100֦ᦸ(0.8mm/30mil)
ӛ ֦ ᐥŘ50֦ᦸ(0.8mm/30mil)
㋤ỬଙŘ198mm(W) x 355mm(L) x 219mm(H)
⸅ ⸇Ř4.9ҝᅏ
ⳐᅞೣŘUSBםℐ⭰ם(ⴆ⫵ⶪЈ)Ŋ(ʨठℐ⭰ 10/100 Mbps)
ヅ ŘAC input: 100~240V ~ 2.5A, 50~60Hz / DC output: 24V=4.16A
Ⴝ̳᭔ࣀŘ15~32ಙ / 20%~85% ଃಙ
Ѳએ᭔ࣀŘ-20~60ಙ / 20%~90% ଃಙ
డ̳᭔ࣀŘⳇㆺ᱿ᄍἇ⿵
HiTi CS-200e
͐ᮢ⦦ᆙ
25
HiTi Digital, Inc.
2011 HiTi Digital, Inc. All Rights Reserved.
Specifications are subject to change without prior notice.
P/N:39.C0800.001

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Prints high-quality plastic cards
- Easy to operate
- Compatible with Windows and Mac
- Bundled software for card design
- Supports various card thicknesses and color styles
- 300dpi print head
- USB and Ethernet connection
- Smart IC encoding expansion socket
- High-capacity input hopper
- Magnetic encoding module