Power Acoustik PTID-7350NRBT new Source Unit Owner Manual

OWNER'S MANUAL
Mobile Video System
DISC NOTES
Handling and Cleaning
@ Dirty, dusty, scratched or warped discs will cause misoperation.
@ Do not place stickers or make scratches on discs.
@® Do not warp discs.
@® A disc should always be kept in its case when not in use to prevent from damage.
@ Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. High temperature places.
4. On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft
cloth slightly moist with isopropyl (rubbing) alcohol. Never use solvent such
as benzene, thinner or conventional record cleaners which may mar the
surface of the disc.
NOTE:
A disc may became somewhat scratched (although not enough to made it unusable)
depending on your handing it in the condition of the usage environment. These
scratches are not an indication of any problem with the player.
Repairing New Discs with Rough Spots
A new disc may have rough edges on its inside a
and outside edges. If a disc with rough edges is — Label side up
used, the proper setting will not be performed =
and the player will not play the disc. Therefore, CD aa
remove the rough edges in advance by using a [% orfié che
ballpoint pen or pencil. To remove the rough edges,
press the side of the pen or pencil against the +
inside and outside edges of the disc. EZ e
ола
Г
— Wipa he disc from
A the centre toword
5) ея Bdge
7
- 48 -
TABLE OF CONTENTS
Table of Contents... cee see ssr an eere san eee een are anne eee eee eee eee eee eee ee eee
Safety Information. … o.oo,
Features... ee
(707-170 [- 221002 eee eee ces ces eee sen ae ee eee eee eee eee eee ee ee eee eee ea ae see een +
LATS JRO oT T= 2 {To o see ee eee era res een eeee ne aee eee ee eee ae eee eee eee ae ane»
Unit Installation and Removal..................c ee,
Front Panel... ... co ee
Base Panel... ER RER RER R ER RAR KR see see eee eee eee ee see eee a eee ae eee eee eee eee
Remote Control... .…. serrés rer aan see eee eee en ee aan eee ae eee eue eee eee eee eee eee ee
Touch Screen Operations... ...... co.cc iii ce ce een aus aan anne een ann annee
Touch Screen Calibrate...............co iii recrear ee RR RR REIR
Main MENU... cree ee ee ee ee ee ee eee ana
21
22
27
33
Radio Operations. … creer een can nan nan nan eee ae ae ae ane eee aan ae ae
DVD Operations... ee eee ee ee aa aan ae ane ane ane ane ee aa aan
Bluetooth Operations.........................e..e...0000000000e0e aan eee ane ane ae aan aan ana
|IPOD Operations... yyrrr rar ane can ana nan aan ana aan ane ana aee aan aan aan annee
SD Operations.....................e.eeececccoceoreoreeree vere ie rece vere ce eee
USB Operations... .…..…..…..…. cer cer cancer aan ann ana aan nan ane aan ane ae eee ane ea ne
DIM Operations... .….…..…..…. arcs cerner can aan aan aan aa aan aan aan anne ane an an a 0 33
AV IN1 Operations.........................e.eeeeveicercer0e0 ei eee eee eee eee aa aan ee eae,
AV IN2 Operations.....................eeeeeeveececveoreareore eee eee eee vee reee nene eee eee
NAVI Operations... creesere een ecran een ann ane eee een aan eee eee eee en ane
TV Operations... .….…..…..…. ee ee ee eee nue anne aan RAR ARE RER HE
DIGITAL TV Operations... ccs cer can sea aan aan can aa see ae eee
System Parameters Setup... ……..…..…...…. AREA care neue aan nee ane ane ee an EEG
Specifications... cer cen ace ner aa a san aan aan ea ana ae ana aan eee aan ae ana ae ae an aa
Ce ee ee a
DCI CE
12
13
14
19
19
20
33
33
35
35
36
40
41
42
45
46
48
SAFETY INFORMATION
Please read the manual carefully before operating this unit and keep it for
future reference.
CAUTION: This unit is a class 1 laser product. To prevent direct exposure to the
laser system, do not open the unit. The laser beam may hurt your eyes.
If the unit requires adjustments, contact an authorized service centre.
USE THIS PRODUCT SAFELY
Be sure you fully understand the following safety information:
When driving
Keep the unit at an appropriate sound level. Driving with the sound at a level
preventing you from hearing sounds outside and around the car may cause an
accident.
When cleaning
Do not expose the product to water or excessive moisture. This could cause short
circuit, fire or other severe damage.
When parked
Parking in direct sunlight can result in very high temperature levels inside your car.
Let the interior and unit cool down before switching the unit on.
NOTE:
Do not use and store the player in dusty, hot or humid environment.
FUSE REPLACEMENT — WARNING!
Never replace any fuse with one of a higher value than the fuse supplied
with your unit. Using a higher current rated fuse may cause damage to
your unit and/or electrical wiring.
Problem Cause Action
TFT MONITOR
No (who display | Reverse circuit not connected Check connections at reverse lamp
when in
reverse) Vehicle is not in reverse Select reverse gear
Front panel will Remove the obstruct and press
not Front panel obstructed OPEN to resume the monitor
open/close open/close sequence
Flashing image
or interference
DVD is not compatible with
current TV system settings
Change setup to accommodate
appears on . disc
screen Image blurred, distorted, or dark
Prolonged image Improper video signal Check wiring and correct
or improper connections
height/width ratio |
display mproper aspect ratio setup Use correct aspect ratio setting
Touch screen
function disorder
If the position is
excursion
Under different condition, for
example: temperature , humidity,
tec.
Do touch screen calibrate
DISC
Cannot insert
disc
Disc already inside unit
Eject current disc and insert new
one
DVD does not
start
playback
Disc is warped or scratched
Use disc in good condition
Disc is dirty or wet
Clean disc with soft cloth
Incompatible disc is used
Use compatible disc
Disc rating exceeds Parental
Lock rating limit
Change parental Lock settings to
lower restriction
Disc region code is not
compatible with unit
Use disc with proper region code
Disc is inserted upside down
Insert disc with label side up
Image blurred ,
distorted, or dark
Disc is illegally copied
Use original disc
No repeat or
searching while
playing VCD
PBC is on
Turn PBC off
Interruption
occurred during
MP3 playback
Disc is dirty or scratched
Clean disc or replace new disc
Bad Disc
appears
on display
Focus error
Press eject or RESET
- 47 -
TROUBLE SHOOTING
If any of problem persists after checking the below list, Please consult your nearest
service dealer. Never attempt to disassemble and repair unit personally.
Problem Cause Action
GENERAL
Yellow wire not connected or
incorrect Check connections for proper
voltage Re wire not connected
: voltage(11-16vdc)
Unit will not | 9" incorrect
turn on voltage
(no power) | Black wire not connected Check connection to ground
ACC Fuse blown or Car battery Install new fuse with correct rating
fuse blown
lllegal operation Press the RESET button
Unit h Speaker wires not connected Check connections at speakers
nit has
power one or each beaker wires Insulate all bare speaker wires from
(but no/low 9 9 | each other and chassis ground
audio output)
chassis ground
Speakers damaged
Review wiring diagram and check
Poor sound | Speaker power rating not
quality or compatible with unit Connect proper speakers
distortion Speaker is shorted Check speaker wire contact
Unit resets Incorrect connection between e
itself when ACC and Positive battery wire Check wiring and correct
engine is off y
Yellow or red wire touching
Unit chassis ground Check for pinched wire
NILDIOWS | Speaker wires touching chassis
fuse ground Check for pinched wire
Incorrect fuse rating Use fuse with correct rating
Jnit has сало > rake safety circuit not Check connections at parking brake
(when in
reverse) Parking brake not applied Apply parking brake
Excessive | Unitis not mounted correctly Check mounting sleeve
skipping Physical defect in media Check media for scratches
IR remote | Dead battery Replace battery
does not : : :
work Battery installed incorrectly Remove battery and install correctly
TUNER
Weak station
searching
Auto antenna is not fully
extended
Connect the auto antenna control
cable properly
Auto antenna not properly
connected
Connect the auto antenna control
cable properly
LOCAL function is activated
Turn LOCAL function off
- 46 -
FEATURES
Motorized TFT-LCD w/ 4 Pre-Set Angles & Last Angle Memory
Naviation Ready - (Optional) NAVIBOX-1
Accepts Add-On Digital TV Tuner Module, DTV-1 (Optional)
Car-Spec DVD Transport for Extreme Temperature Exposure
Playback from DVDR/RW & CDR/RW Including VCD, MP3, MP4 & DiviX
Recall Memory for Last DVD Position
IPOD Input Connection (requires IC-1) (Optional)
Mini-USB Connection for MP3 & MP4 Playback From 4gb Flash Drive
4 GB SD Card Reader for MP3, MP4, DiviX & Xvid Playback
96mb Internal Memory for Background & Screen Saver Images
18 FM / 12 AM Station Memory
50w x 4 MOSFET Powered Speaker Level Outputs
Front & Rear Pre-Amp Outputs
Variable Subwoofer Pre-Amp Output w/ LPF (80, 120, 160Hz)
A/V Outputs for Multiple Components
A/V Inputs for Secondary Source
Front Panel 3.5mm Auxiliary A/V Input
Reverse Camera Input w/ Trigger
Custom & Pre-Set EQ Settings
Audio Staging Controls
12/24 Hour Clock
USA/European Frequency Stepping
NTSC/PAL Auto Selection
480 x 234 Screen Resolution
400 NIT Backlight Brightness
Built-In TV Tuner (Optional)
Bluetooth Features (Optional)
NOTE:
Work with Most Bluetooth V2.0 Enabled Phones
Noise & Echo Cancellation
Contacts List Transferred for Easy Access Dialing
Caller ID Shows Name and Number from Contacts List
Recent Calls & Talk Time Logs
A2DP for MP3 Playback
This user's manual is only for reference.
Modifying rights are reserved.
Specifications are subject to change without notice.
ACCESSORIES
Bolt x 1 Back Strap x 1 M5X5 Screws x 4 Keys x 2
7
Power Wire x 1 Connecter Wire x 1 Connecter Wire x 1 Operational Manual x2
(White) (Yellow)
8 9 10
m CJ =
Trim Bezel x 1 Trim Bezel x 1 USB Cable x 1 AV IN Cable x 1
(Small) (Big)
13 14 15
[J
Mounting Sleeve x1 External Microphone x 1 Remote Control x 1
(Optional)
SPECIFICATIONS
GENERAL
Supply Voltage
Load Impedance
Max Power Output
Bass 100Hz
Treble 10KHz
Dimensions (approx.)
Mounting (approx.)
FM TUNER
Frequency Range
IF
Usable Sensitivity
Stereo Separation
Frequency Response
AM TUNER
Frequency Range
IF
Usable Sensitivity
TV TUNER (Optional)
Frequency Range
DVD PLAYER
Signal-to-noise Ratio
Distortion
MONITOR
Resolution
Brightness
Contrast
NOTE:
: 14.4V DC (11-16V allowed)
: 40 per channel
: 50W x 4
:2 10dB
:2 10dB
: 180 x 188 x 59 mm (d/w/h)
: 160 x 178 x 50 mm (d/w/h)
: 87.5 — 108 MHz (Europe/Asia)
87.5 — 107.9 MHz (USA)
: 10.7 MHZ
: < 15dBuV
: = 26dB (1 KHZ)
: 100-20000Hz
: 531 - 1602 KHz (Asia)
522 - 1620 KHz (Europe)
530 - 1710 KHz (USA)
: 450 KHZ
: < 40dBuV
NTSC: 55.25 MHz-855.25MHz
PAL: 48.25 MHz-855.25MHz
: > 85dB (1 KHz)
: = 0.5%
: 480 (w) x 234 (H) (RGB)
: 350 cd/m?
: 250:1
Specifications and design are subject to modification without notice due to
improvement in technology.
- 45 -
1. Source Images List
Touch [UP] / [DOWN] icons to select the image captured from DVD, SD card and
USB.
2. Screen Saver Images List
Touch [UP] / [DOWN] icons to select the image of screen saver.
3. Desktop
Touch to set the selected image of source images list as desktop image.
4. Del
Touch to delete the selected image of screen saver images list, or delete the selected
image of source images list.
5. Add
Touch to add the selected image of source images list as screen saver.
6. Screen Saver Time
Touch to adjust the screen saver time as following:
3MIN - 5MIN - NEVER - 10S - 20S - 30S - 60S - 3MIN
OTHERS SETUP
SCREEN SOUND CLOCK SAVER
1. RADIO AREA
Touch [LEFT] / [RIGHT] icons to switch the Radio Area as following:
USA — JAPAN — ORIT — EUROPE — ASIA — USA
2. LOC
Touch [LEFT] / [RIGHT] icons to switch the LOC and DX.
3. EQ
Touch [LEFT] / [RIGHT] icons to switch the EQ as following:
USER — POP — CLASSIC — ROCK — JAZZ — USER
4. LOUD
Touch [LEFT] / [RIGHT] icons to turn Loud on or off;
DEFAULT
The unit will restore all default settings of System Parameters Setup.
- 44 -
WIRE CONNECTION
a LL A
АА >
o ||
|
LE 8/0 |
A
Los = NS pr = . — .
3 à 6
1. RADIO & ANALOG TV ANTENNA (OPTIONAL)
2. 15PIN SOCKET
3. AUDIO /VIDEO OUTPUT & INPUT
4. NAVI & DIGITAL TV ADAPTER (OPTIONAL)
5. IPOD ADAPTER
RADIO ANTENNA ADAPTER
ANALOG TV ANTENNA ADAPTER(OPTIONAL)
RED ACC+
YELLOW BATT
Ed he
eL UE MITE AMP. REM
BLUE AUTO ANT CONTROL
NO En MUTE(OPTIONAL)
LL
CREYIBLACK) FR-
FR+
FL-
FL+
RR+
RR-
RL+
(BLACK) RL-
E DRANGE REVERSE CONTROL{Active High input]
MET] |] YELLOW VIDEO OUT
= (fe) BLACK MIC IMOPTIONAL)
y Шер NAVIBOX-IN ADAPTER(OPTIONAL)
MA LILIA JT
LALALA
S— | lle) ) DIGITAL TV-IN ADAPTER(OPTIONAL)
Brake Control
Connect the brake control wire AUTO_ANT (see Wiring Diagram). It is necessary to
connect the Brake Control wire to the Hand-brake switch of the car. While driving, the
TFT monitor will display the alarm picture (see as follows) in order to ensure the
safety.
VIDEO VIEWING IS NOT
AVAILABLE WHILE DRIVING
Under the Rear View Mode, the Brake Control function is no effective.
Telephone Mute Control (Optional)
Connect the telephone mute control wire TEL_MUTE (see Wiring Diagram). If there
is a vehicle call comes in, the sound volume will mute off automatically, and TFT
monitor shows: PHONE. ..: when call finished, the sound volume will recover to
former volume, and the words PHONE... disappear.
Auto Antenna Control
Connect the auto antenna control wire AUTO_ANT (see Wiring Diagram). The
antenna will lift when the unit startup; it will descend when the unit turnoff.
3. Sub-Woofer Frequency
Touch [UP] / [DOWN] icons to switch the SUB-WOOFER frequency as following:
OFF — 80Hz — 120Hz — 160Hz — OFF
4. Sub-Woofer Volume
Touch [UP] / [DOWN] icons to adjust the SUB-WOOFER volume parameter (Range:
Oto 15);
5. Buzzer (Optional)
Touch to turn Buzzer on or off;
6. Balance / Fader
Touch [LEFT] / [RIGHT] icons to adjust the BALANCE parameters (Range: -9 to 9);
Touch [FRONT] / [REAR] icons to adjust FADER parameters (Range: -9 to 9);
7. X-Bass
Touch to turn X-Bass on or off;
CLOCK SETUP
SCREEN SOUND CLOCK SAVER
1. Hour
Touch [UP] / [DOWN] icons to adjust the HOUR;
2. Minute
Touch [UP] / [DOWN] icons to adjust the MINUTE;
3. Time Display
Displays the time currently.
4. Time Mode
Touch to switch the time mode between 12-Hour and 24-Hour;
SAVER SETUP
KA SYSTEM
SOURCE
001
002
003
004
005
006
SCREEN SOUND CLOCK кВа ee
- 43 -
SYSTEM PARAMETERS SETUP
Touch the [SYSTEM] icon to enter the System Parameters Setup.
SCREEN SETUP
SYSTEM
SCREEN | SOUND CLOCK AU
1. Contrast
Touch [UP] / [DOWN] icons to adjust the CONTRAST parameters (Range: -9 to 9);
2. Tint
Touch [UP] / [DOWN] icons to adjust the TINT parameters (Range: -9 to 9);
3. Color
Touch [UP] / [DOWN] icons to adjust the COLOR parameters (Range: -9 to 9);
4. Brightness
Touch [UP] / [DOWN] icons to adjust the BRIGHTNESS parameters (Range: -9 to 9);
SOUND SETUP
©
BUZZER TRE
BASS
—
SUB-WF T OFF
EY)
X-BASS
OFF SUB-VOL Е: 7
т
“im DEF
SCREEN Eee | CLOCK SAVER 0
VL)
1. Treble
Touch [UP] / [DOWN] icons to adjust the TREBLE parameters (Range: -9 to 9);
2. Bass
Touch [UP] / [DOWN] icons to adjust the BASS parameters (Range: -9 to 9);
- 42 -
Wiring Diagram
|
[fm É 5 | 28
| Ч da
|} 23 | 88%
4 _ LL F
— ñ ;
Zh — = TT
"Е ' ,
im es
E x | KO z >
x 1 a 2
’ © $ ©
Je 2) 1&
ya |
те De
T т >
if
da Eo E A A à x3
iy = | = q e
SEY Y =0 0 2 € o -8 | be
| hee I Î 5
= ГАЗ | o
E À 0 a == = |= 3
Ez AZZ 2 uw —
| =| 12] + El Ol % = | |
0 G = x e = = et Ц
8 = E «= = Z| = р I я =
5 - — | es
"m —— —_— | ( VE т z
| 7 = = 5
a = I= HI) 4 8 3 .
> = | dar La # Е Ea 3 e
| | “x — — 2 En | a =
lf fel) El E Jal Tio | а 5 3
| |< | a с À | = |
x | | # В | К 5 5 5 8
№ мы | 5! — | с 6
| | di я ——— — E e
ñ В wil ui N Y == 25 =
т =. = on Ч а a — | ый :
4 Tg Te Ty Su E u Eu === |
L J — FU =i
— ||: - | i я
| == OLE j = 4
"= “ E 5 el =
ke | a 5 8 5 3 5
€ E) 3 hi bo
{p= : 8 5 5 18 |8 Ë
= oll SIE bE EIN
MN, la i> zi Bil Sas CO
Wp WR 2 8D == < = #1 a +00
| | ] 3 = | 2 pil
(05-1 3 XA zu
(| rar Y f La] | 7 LP Es
М a = = = Cr — = ~
| | | | | i$ NAS 28
№ | ij o = | |
(JT 1€ FT al]
Le | = | | E Al | |
A L | i = i Rl o A
ti — | a Va
xi JA b
a
TEL-MUTE BROWN
UNIT INSTALLATION AND REMOVEL
Installation Method 1:
1 Install the mounting sleeve 2 Bend the claws into place
into the dashboard. to secure the sleeve.
3 Slide the units into the mounting sleeve. 4 Install the trim bezel onto the unit.
5 Sketch map when installation finished.
DIGITAL TV OPERATIONS (Optional)
DIGITAL TV
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Return
Touch to return submenu to menu.
4. Menu
Touch to display the menu.
5. Exit
Touch to exit the menu.
6. Direction Arrows Keyboard
Touch the arrows icons to select the item, touch the [ENTER] icon to confirm the
selection.
NOTE:
Under DIGITAL TV mode, please view all operations by DIGITAL TV Device DTV-
1 User's manual.
- M-
TV OPERATIONS (Optional)
Touch the icon “TV” to enter the TV Mode:
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Current Channel Indicator
Displays the TV channel currently playing.
5. Auto Station Tune
Touch to automatically seek all strongest stations available; touch any icon to stop
the tuning.
5. / 6. Next Station - Down / Up
After the Auto Station Tune, touch to select the stations downward / upward.
7. / 8. Seek Next Station — Down / Up
Touch to seek the next available channel by increasing / decreasing the tuning
frequency.
- 40 -
Removal Method 1:
1 Detach the trim bezel.
Ac
— ; = ul W pp
т la “Na 1 AT Г
Me — К
2 Insert the keys into the aperture
between the unit and the
mounting sleeve to release the
internal locks.
Installation Method 2:
1 Tighten the bolt onto the rear 2 Tighten the back strap onto your
panel of the unit. car inside the dashboard.
3 Place the unit into the dashboard; 4 Screw the unit on the car on the
make the bolt bar across back strap; two sides with M5x5 SCREWS.
and then fix the bolt by the Nut M5.
5 Install the trim bezel onto the unit.
= = эст = | E т = { =
5 E i Fs
| NS | Ss DE
T | н i | = Si] @ =
> = lf Bh Ï || If a
21 р | | = Ч.
| # | Al | | | E O - a
Le = | + a a = ; >
=== — ; || ol © Net
“= ` NR
== : | li > LA
= [a] 0] a À
- 10 -
Quick Access Key [NAVI]
| Q fick Access Key
NAV] ra
CIE ©
Under any working mode, press the [NAVI] button to switch to NAVI mode; press the
[NAVI] button again to return the previous working mode. For example, under Radio
mode, press the [NAVI] button to switch to NAVI mode; press the [NAVI] button again
to quit the NAVI mode and return back the Radio mode.
Enter the NAVI mode by Quick Access Key, the previous working mode is still
working on background. For example, under Radio mode, press the [NAVI] button to
switch to NAVI mode, and you can still listen to the radio stations. But when voice of
Navigation comes, the radio will be interrupted until voice of Navigation ends.
No NAVIBOX Connection
Touch the “NAVI” icon to enter the following screen if the NAVIBOX not connected:
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
- 39 -
Go to NAVI mode
Touch the icon “NAVI” to enter the NAVI Mode if NAVIBOX connected:
Following screen will be displayed:
ON ECARD
Information
Please do not operate the controls of goNgo
while driving. Doing so could endanger yourself,
your passengers and other road users.
Please observe the actual traffic signal.
| agree
Read information and touch “I agree” button at the bottom of the screen.
Enter the NAVI mode by main menu, the NAVI operations are effective only, all other
processes are disable such as Radio, CD etc.
NOTE:
Under NAVI mode, please view all operations by Navigation Device NAVIBOX-1
User's manual.
- 38 -
Removal Method 2:
1 Detach the trim bezel.
3 Unscrew the Nut M5 screw on the rear
2 Unscrew the unit off the car on
the two sides.
4 Sketch map when removal finished.
- 11 -
side of the unit and pull out the unit.
FRONT PANEL
1. MINI USB 5.RESET 9. MENU/NAVI
2. P. ANGLE 6. REMOTE 10.POWER/SOURCE
3. VOLUME — 7.MIC 11.AV IN2
4. VOLUME + 8.MUTE
1. Mini USB
The unit will be switched to USB Mode automatically when USB connected, and play
the songs, pictures, videos in USB.
2. P.ANGLE
Inserting Disc
Touch the [P.ANGLE ] button, the front panel will slide down to
Position 1; then insert a disc into the Disc Loading Slot;
the panel will slide back automatically. al +
Ejecting Disc
Touch the [P.ANGLE ] button, the front panel will slide down to Position 1; then eject a
disc; the panel will slide back automatically if no action is taken.
TFT Viewing Angle Adjustment:
Hold on touch the [P.ANGLE ] button to adjust the viewing angle as following:
Angle 1- Angle 2- Angle 3- Angle 4- Angle 1
FE ea E = IT ze LE Er
| | a = E Де talk | | 51m В.
№ === y ке 1 Y de — A | He == 2, M
Angle 1 Angle 2 Angle 3 Angle
NOTE: you can also make the same adjustments with the remote control. Simply
press and hold the [PANGLE] button to adjust according to your preference.
- 12 -
Position 1
The Touch Screen is restored to their default positions. Touch anywhere of panel to
finish the calibration and go to the following screen:
Information
Please do not operate the controls of goNgo
while driving. Doing so could endanger yourself,
your passengers and other road users.
Please observe the actual traffic signal.
| agree
Read information and touch “| agree” button at the bottom of the screen, then enter
the NAVI mode.
NOTE:
If change the NAVIbox to connect another unit, please take out the SD card from the
NAVIbox and connect with computer, the following screen is displayed on computer:
Removable Disk (J:) AEE
7
File Edit View Favorites Tools Help
@ Back = > + К | Search Folders EEE;
Address |S 3:4 “| Е3 ‘50
a : ee app
File and Folder Tasks À DCIM . t Setup Information
1KE
Es
mi Rename Ehis File
0 3 Move this File
| В Copy Ehis File |
ME Publish this file to the |
web
app.zfs
ZFS File
11,182 KB
Ts
navimap.zfs
2FS File
1,408, 070 KB
navimap
— Setup Information
| 1 KB
—
o E-mail this File
YX Delete this file
BE system
= wd Setup Information
1 КВ
—
Other Places
ww
Delete the file “calib.ifo” only. Insert the SD card into NAVIbox again, and connect
the NAVIbox with another unit.
- 3/7 -
NAVI OPERATIONS (Optional)
Touch Screen Calibration
When 1% time to enter NAVI mode, you will see the calibration screen. Please touch
the points from 1 to 5 by using a ballpoint pen or pencil.
@ + —- ( 5)
Press the Cross point!
+ ©
D
To verify the calibration, please touch the points from 1 to 5 again.
2— +
Verify. Press the Cross point!
3 He
Then the following screen is displayed:
Calibration OK!
- 36 -
3. VOL- / 4. VOL +
Press the [VOL +] button to increase the volume.
Press the [VOL -] button to decrease the volume.
5. Reset
Press and hold this button to switch back to all the original factory settings.
Keep in mind this will erase all your preset radio stations and any EQ settings you
may have made and saved.
6. Remote
Remote infrared receiver
7. MIC COptional)
Microphone
8. Mute
Press to switch off the sound; press it again to resume to the previous volume level.
9. Menu/Navi
Touch to access the Main Menu.
Hold on pressing to access the Navigation Menu.
10. Power/Source
When ACC is on, press the button to turn the unit on; hold on pressing the button to
turn off the unit.
When the unit is on, press to switch between different modes.
11. AVIN 2
Connect an external audio/video device to this jack to watch to the device through
your car video system.
2
>
—a
eee DD Ey ET
= ||
12. EJECT 13. SD CARD SLOT
12. EJECT
When flip down the front panel, press [EJECT] button to eject / load a disc.
13. SD CARD SLOT
The unit will be switched to SD CARD Mode automatically when SD CARD
connected, and play the songs, pictures, videos in SD CARD.
- 13 -
REMOTE CONTROL AV IN OPERATIONS
Touch the icon “AV IN” to enter the AV IN Mode:
® pene (9
5 000 a
3 E
000 @
Rr ee | MENU РВС/АЗТ DISP 62
SYSINAVI F.REV 23
5
AN т 1. Current Source Indicator
(Em С By po Displays the source currently playing, touch to return the main menu.
oO A == 2. Mute
—— 30 Touch to switch off the sound; touch it again to resume to the previous volume level.
REPEAT o ET
© —@ NOTE:
ST \ ALS There are 2 RCA Audio Inputs & 1 RCA Video Input for unit.
LY @ AUX IN OPERATIONS
3s Touch the icon “AUX IN” to enter the AUX IN Mode:
1. POWER/SOURCE 13. PREVIOUS 25. SYSTEM / NAVI
2. MUTE 14. SLOW / END CALL 26. F.FWD
3. NUMBER BUTTONS 15. TITLE / PBN 27. RIGHT(Seek up)
4. MENU /* 16. ZOOM / CALL 28. STOP
5. AUDIO / # 17. SUBTITLE / PBP 29. D.ANGLE
6. EQ/ LOUD 18. OPEN / CLOSE / PANGLE/ EJECT
7. UP (TUNE UPYPTY 19. SETUP 30. PLAY / PAUSE
8. LEFT (SEEK DOWN) 20. VOLUME+ 31. NEXT
9. ENTER / BAND 21. VOLUME- 32. А-В / PHONE PAIR
10. PROGRAM 22. DISPLAY 33. REPEAT / PHONE |
11. DOWN(Tune Down)/AF 23. PBC /AST / CLEAR 34. PAL/ NTSC / AP 1. Current Source Indicator
12. RANDOM / TRANSFER 24. FREV 35. STEREO/ MP Displays the source currently playing, touch to return the main menu.
NOTE: 2. Mute
This is an universal remote, some functions would be optional. Touch to switch off the sound; touch it again to resume to the previous volume level.
- 14- - 35 -
Ef
Video Page
Under the Video Page, use the controller of IPOD itself to control all operations of
IPOD including play music, videos and view pictures.
1. Music
Touch the icon to access the music page.
NOTE:
The TV Output in IPOD SETUP should be effective, and the pictures é videos could
be displayed on the TFT monitor of unit.
SD CARD OPERATIONS
1. Touch the [SD CARD] icon to access to SD CARD Mode if SD / MMC Card
inserted.
2. The unit will switch to SD CARD Mode automatically if SD / MMC Card connected.
3. When SD / MMC Card disconnected, the unit will switch to RADIO Mode
automatically if there is no disc in the unit; the unit will switch to DVD Mode
automatically if there is a disc in the unit.
4. Under the SD CARD Mode, all operations are same as DVD Mode.
USB OPERATIONS
1. Touch the icon [USB] to access the USB Mode if USB connected.
2. The unit will switch to USB Mode automatically if USB connected.
3. When USB disconnected, the unit will switch to RADIO Mode automatically if there
IS no disc in the unit; the unit will switch to DVD Mode automatically if there is a disc
in the unit.
4. Under the USB Mode, all operations are same as DVD operations.
DIM OPERATIONS
Touch the icon [DIM] to switch brightness modes as following:
ry — DMI DIM2
The screen brightness will decrease step by step from DIM — DIM1—» DIM2.
- 34 -
1. [POWER/SOURCE]
When ACC is on, press the button to turn the unit on; hold on pressing the button to
turn off the unit.
When the unit is on, press to switch between different modes.
2. [MUTE]
Press to switch off the sound; press it again to resume to the previous volume level.
3. [NUMBERS 0~9]
Radio Mode, press the buttons 1~6 to select a preset station, hold on touching to
store current radio frequency to the preset station.
DVD Mode, When playing DVD, VCD, CD, MP3, press the buttons 0~9 to input the
number of track, press the [BAND] button to confirm.
TV Mode, press the buttons 0~9 to choose the channel and press the [BAND] button
to confirm.
Bluetooth Mode, press the buttons 0~9 to input phone numbers.
4. [MENU / *]
DVD Mode, press to return to the boot menu when playing DVD disc.
Bluetooth Mode, press to input the symbol *.
5. [AUDIO / #]
DVD Mode, press to change dialogue language when playing DVD disc; Press to
select different audio channels when playing VCD, CD disc.
Bluetooth Mode, press to input the symbol #.
6. [LOUD/EQ]
Press to adjust the EQ setting as following:
USER — POP — CLASSIC — ROCK — JAZZ — USER
Hold on pressing to switch between LOUD ON / OFF.
1. [AJ[PTYY 8. [<]/ 11. [v]/ [AF] 27. [>] Direction Key
DVD Mode and System Parameters Setup, press the [Vv] / [A] buttons to move the
cursor upward / downward to select item. Press the [<] / [>] buttons to move the
cursor leftward / rightward to select item.
Radio Mode, press the [<] / [>] buttons to switch the stored stations. Hold on pressing
{пе [<] / [>] buttons to fast seeking the next available channel by decreasing /
increasing the tuning frequency; seeking will stop by pressing any button. Press the
[V]/ [A] buttons to decrease / increase the frequency step by step. Hold on pressing
the [1] /[P TY] to activate/deactivate the PTY function, hold on press the [v] / [AF] to
activate/deactivate the RDS operation.
TV Mode, hold on pressing the [<] / [>] buttons to fast tuning channel forward the low
/ high frequency automatically. Press the [A] / [Vv] buttons to select the stored channel
upward / downward.
Bluetooth Mode, press [<] / [>] buttons to switch between dialing page, phonebook,
music and setup page.
GPS Mode, press the [Vv] / [A] buttons to decrease / increase the brightness of the
screen.
- 15 -
9. [BAND/ENTER]
DVD Mode, press to confirm the selection.
Radio Mode, press to switch the wave band as following:
FM1 — FM2 - FM3 - AM1- АМ2 - ЕМ1
TV Mode, press to switch the TV audio as following:
NTSC — PAL/BG — PAL/I —- PAUDK — NTSC
Hold on pressing to switch the TV system area as following:
USA — CCIR — ITALY — AUS — NZ — USA
Bluetooth Mode, press the button to turn on/off selected item.
10. [PROGRAM]
DVD Mode, press to enter / exit the PROGRAM Function when playing the DVD,
VCD, CD disc.
12. [RANDOM/TRANSFER]
DVD Mode, press to turn RANDOM function on / off when playing DVD, VCD, CD
disc.
Bluetooth Mode, press to transfer the call between the unit and your cell phone when
talking the phone.
13. [PREVIOUS] / 31. [NEXT]
DVD Mode, press to go to the pervious / next chapter, track or song.
14. [SLOW/END CALL]
DVD Mode, press to slow motion playback at 1/2x speed when playing DVD/VCD
disc. Each press changes speed from 1/2x to 1/4x to 1/8x to 1/16x then back to
normal play.
Bluetooth Mode, press to reject or hang up a call.
15. [TITLE/PBN]
DVD Mode, press to enter the title menu when playing DVD disc.
Bluetooth Mode, press to enter the next page of phone number list in phonebook.
16. [ZOOM/CALL]
DVD Mode, press to zoon the picture display when playing DVD, VCD disc. Each
press changes speed from 2x to 3x to 4x to 3x to 2x then back to normal play.
Bluetooth Mode, press to call a number or to receive a cell phone call.
17. [SUB-T/PBP]
DVD Mode, press to change the subtitle language when playing DVD disc.
Bluetooth Mode, press to enter the previous page of phone number list in phonebook.
18. [OPEN/CLOSE/P.ANGLE/EJECT]
Press the button to open the monitor to eject the disc, press it again to close the
monitor.
Hold pressing the button to enter into adjusting mode, press it again to adjust the
angle of the front panel as following:
Angle 1 - Angle 2 - Angle 3 - Angle 4 - Angle 1
19. [SETUP]
DVD Mode, press to enter/ exit the DVD SETUP menu.
20. [VOL+] / 21. [VOL-]
Press to increase / decrease the volume.
Hold on pressing the button to keep increasing/decreasing the volume.
- 16 -
IPOD OPERATIONS (Optional)
1, Touch the [IPOD] icon to switch IPOD Mode if IPOD connected.
2, The unit will switch to IPOD Mode automatically if IPOD connected.
3, The unit will switch to RADIO Mode automatically if IPOD disconnected.
Music Page
Under the Music Page, it is not effective for the controller of IPOD itself, use the keys
of unit to control the operation and all operations are same as DVD Mode.
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Next / 4. Previous
Touch to go to the next / pervious chapter, track or song.
5. Play/Pause
Touch to pause or resume the playback.
6. Video
Touch to access the video page.
- 33 -
Phone Number List
Touch the icon 1-5, when item is changed to yellow color, the item is selected. And
touch it again and the item is changed to green color, the operation is active and you
Will see the below image:
1, Information Display
You will see the phone number of the item in blue color.
2, Phone Number
If this number is stored, you will see the name; if not, you will see the phone number.
Touch the icon when item is changed to yellow color, the item is selected.
3. Phonebook
Touch to return the phonebook page.
AUDIO
==.)
nn
.
—
ETE.
0900
1. Previous / 2. Next
Touch to select the previous / next track.
к
г
3. Play / Pause
Touch to stop the playback; touch it again to continue playing.
4. Stop
Touch to stop the playback, touch the [Play/Pause] icon to start the playback from the
beginning.
- 32 -
22. [DISPLAYT
Under main menu, press to set the background by default picture.
DVD Mode, press to display current playback information.
Bluetooth Mode, press to return to the previous page.
23. [PBC/AST/CLEAR]
DVD Mode, press to select the PBC function on / off when playing VCD disc.
Radio Mode, press to review stored stations; Hold on pressing to automatically
program the 6 strongest stations available into the presets in the each wave band.
TV Mode, automatically seek the stations available.
Bluetooth Mode, press to cancel or clear the numbers you have input.
24. [F.REV] / 26. [F.FWD]
DVD Mode, press to fast reverse / fast forward at 2x speed. Each press changes
speed from 2x to 4x to 8x to 16x to 32x then back to normal play. Press the
[PLAY/PAUSE] button to resume to normal playback.
25. [SYSTEM/NAVI]
Press to enter / exit the System Parameter Setup menu when playing DVD, VCD and
CD disc.
Hold on pressing to enter / exit the NAVI Mode.
28. [STOP]
DVD Mode, when DVD/VCD/CD disc playback, press the button once to stop the
playback, press the [Play/Pause] button to resume the playback again. Press the
button twice to stop the playback, press the [Play/Pause] button to start the playback
from the beginning of disc. When MP3 disc playback, press the button to stop the
playback, press the [Play/Pause] button to start the playback from the beginning of
track.
29. [D.ANGLE]
DVD Mode, press to select different viewing angles with interactive DVD media
during playback.
30. [PLAY/PAUSE]
DVD Mode, press to pause or resume the playback.
32. [A-B/PHONE PAIR]
DVD Mode, press to set point A, press it again to set point B, then the unit starts to
repeat from A to B. When playing DVD, MP3, press it again to stop repeating. When
playing VCD, CD, press it again to repeat all tracks.
Bluetooth Mode, press to start phone-pairing.
33. [REPEAT/PHONE]
DVD Mode, press to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD
playback. Press to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback.
Press to repeat as REPEAT ONE-REPEAT ALL-REPEAT OFF when MP3 playback.
Bluetooth Mode, press to break off or connect cell phone with the unit.
34. [PIN/AUDIO PLAYER]
DVD Mode, press to switch the video output (PAL/NTSC) when playing DVD disc.
- 17 -
Bluetooth Mode, press to enter into AUDIO PAIRING.
35. [STEREO/MUSIC PAIR]
Radio Mode, press to turn the stereo on / off under.
Bluetooth Mode, press to break off or connect the music storage medium with the
unit.
REPLACING THE BATTERIES
If the remote control has no function or if the operating range reduced, replace the
old battery with new one.
1. Pull out the battery holder. Follow the
arrow 1 slide it to the right toward the
battery while at the same time pull the
battery holder away from the remote
control.
2. Place the new battery. Place the new
lithium battery with the (+) side up.
3. Push the holder back. Using the finger
to push in the holder back until the
locking sound is heard.
- 18 -
PHONEBOOK
1 MY PHONEBCIOR
E = SIM PHONEBOOK
Ei 4 DIALED CALU
(11 1]
4 RECEIVED CALL
== 5 MISSED CALL
— lm
prey ee ЗВЕНО
© © © ©
1. My Phonebook
The phone numbers are stored in phone.
© ФО ©
2. SIM Phonebook
The phone numbers are stored in SIM card.
3. Dialed Call
The phone numbers are dialed in phone.
4. Received Call
The phone numbers are received in phone.
5. Missed Call
The phone numbers are missed in phone.
6. Transfer
When talking the phone, touch to transfer the call between the unit and cell phone.
7. Call
Touch to call a selected number from phonebook or to receive a cell phone call.
8. End Call
Touch to reject or hang up a call.
9. / 10. Previous Page / Next Page
There are 5 numbers in each page, touch to see the previous / next page.
- 31 -
CALL IN
When call in, you will see the below image:
Te
NAME ee dede de dee de de de de
NUMBER: ******
CALL IN......
TRANS
NL EEE
NUMBER: #+++++
TALKING...
TRANS
NAME: E de de dede di de. de
N © M B = a A
END CALL......
IE =e
: Joe
TRANS | ““u 7 с
- 30 -
TOUCH SCREEN OPERATIONS
TOUCH SCREEN CALIBRATION
When “Power Off”, press the buttons 2, [BAND] of remote control to enter the
CALIBRATION page:
PRESS THE CROSS ON THE SCREEN
To touch the points from 1 to 5 until the points change to next cross by using a
ballpoint pen or pencil. After all 5 points have been touched, the unit has been
finished the CALIBRATION. If the calibration is succeeded, the unit would display the
following page and then power off automatically.
If the calibration is failed, the unit would display the following page and please
operate the above processes again.
CALIBRATION FAILED
PLEASE PRESS THE TOUCH
SCREEN TO CONTINUE
- 19 -
MAIN MENU
CHGITAL TY 50 CARD Li Ta]
1, Touch to access the DVD mode.
2, Touch to access the RADIO mode.
3, Touch to access the NAVI mode.
4, Touch to access the IPOD mode.
5, Touch to access the DIGITAL TV mode.
6, Touch to access the SD CARD mode.
7, Touch to access the Bluetooth mode.
8, Touch to access the 2" page of MAIN MENU.
1, Touch to access the TV mode.
2, Touch to access the USB mode.
3, Touch to access the AV IN mode.
4, Touch to access the AUX IN mode.
5, Touch to access the SYSTEM PARAMETERS SETUP.
6, Touch to access the DIM function.
7, Touch to access the previous working mode.
8, Touch to access the 1% page of MAIN MENU.
- 20 -
PHONE CALL
0000
1. Call
Touch to call a number or receive a cell phone call. Touch to call the last number if no
number input.
2. Clear
Touch to cancel or clear the numbers you have input.
3. End Call
Touch to reject or hang up a call.
4. Transfer
When talking the phone, touch to transfer the call between the unit and cell phone.
5. Number Keys
Touch the icons to input a phone number.
6. Information Display
CALL OUT
When call out, you will see the below information:
CALL OUT. *+++=x€xx=xx=
When talking, you will see the below information:
TALKING. ud dd de dd
When end the call, you will see the below information:
a: EN I EEE
- 29 -
1. Auto Answer
Touch to select auto / manual answer when call is coming.
2. Phone Connect
Touch to select auto / manual phone connect when return back the car.
3. Phone Pairing
Touch the icon and the below words on information display:
PHONE PAIR WAITING
Then set the phone to pair with unit. When paring finished, set the phone connect
with unit, then you can see the phone name on information display.
Touch the icon again to cancel the pairing and the below words on information
display:
PHONE PAIR FAIL
4. Audio Paring
Touch the icon and see the below words on information display:
AUDIO PAIR WAITING
Then set the audio device to pair with unit. When paring finished, set the audio
device connect with unit, then you can see the audio device name on information
display.
Touch the icon again to cancel the pairing and the below words on information
display:
AUDIO PAIR FAIL
5. Pin Code
You can change the PIN code by remote control. Press the [CLR] button of remote
control to clear the PIN code, and input the new 4 digitals number, press the [SETUP]
button of remote control to save the new code.
6. Information Display
NOTE:
The unit can pair with totally 5 different devices including cell phones and audio
players. Use the [PHONE] / [AUDIO PLAYER] buttons of remote control to connect /
disconnect the device.
1, When you want to connect another paired cell phone with unit, to press the
[PHONE] button of remote control to disconnect the current connecting cell phone;
use the another cell phone to connect with the unit without paring operations.
2, When you disconnected the current connecting cell phone, also you can press the
[PHONE] button of remote control to connect the cell phone with the unit again.
3, When you want to connect another paired audio player with unit, to press the
[AUDIO PLAYER] button of remote control to disconnect the current connecting
audio player; use the another audio player to connect with the unit without paring
operations.
4, When you disconnected the current connecting audio player, also you can press
the [AUDIO PLAYER] button of remote control to connect the audio player with the
unit again.
- 28 -
RADIO OPERATIONS
Touch the [RADIO] icon to access to Radio Mode.
1106.90 /106.90 /106.90 /
MHz PERRIER LEE еже ор,
106.90 [@
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Preset Stations
Touch to select a preset station, hold on touching to store current radio frequency to
the preset station.
4. BAND
Touch the icon to switch the FM/AM wave band as following:
FM1 - FM2 - FM3 - AM1- AM2 - FM1
5. Auto Station Tune
Touch to automatically program the 6 strongest stations available into the presets in
the each wave band; touch any icon to stop the tuning. After tune, the unit will scan
through all tunable presets stations and play them for 5 seconds each; touch any
icon to stop the playing.
6. Local
Touch to set the local on / off. When you are using the local searching function, you
can only receive the radio station with strong enough signals and fine state.
7.18. Tune Frequency - Down / Up
Touch to tune the radio to a lower / higher frequency by one frequency step. Hold on
touching for continuous tuning down / up.
9. Stereo
Touch to set the stereo on / off.
10. / 11. Seek Next Station — Down / Up
Touch to tune to the next strong station at a lower / higher frequency. Touch any icon
to stop seeking.
- 21 -
DVD PLAYER OPERATIONS
1, Touch the [DVD] icon to access to DVD Mode if disc inside.
2, The unit will be switched to DVD Mode automatically when inserting the disc.
3, The unit will switch to RADIO Mode automatically if disc ejected.
Y
© EDO DO
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Stop
When DVD/VCD/CD disc playback, touch the icon once to stop the playback, touch
the [Play/Pause] icon to resume the playback again. Touch the icon twice to stop the
playback, touch the [Play/Pause] icon to start the playback from the beginning of disc.
When MP3 disc playback, touch the icon to stop the playback, touch the [Play/Pause]
icon to start the playback from the beginning of track.
4. Play/Pause
Touch to pause or resume the playback.
5./ 8. Fast Forward / Fast Reverse
Touch to fast forward / fast reverse at 2x speed. Each touch changes speed from 2x
to 4x to 8x to 16x to 32x then back to normal play. Touch the [PLAY/PAUSE] icon to
resume to normal playback.
6. Next / 7. Previous
Touch to go to the next / pervious chapter, track or song.
9. Switch
Touch to access the 2" page of DVD menu.
- 22 -
BLUETOOTH OPERATIONS (Optional)
Touch the [BLUETOOTH] icon to access the Bluetooth Mode:
® o
-
1
1. Current Source Indicator
Displays the source currently playing, touch to return the main menu.
2. Mute
Touch to switch off the sound; touch it again to resume to the previous volume level.
3. Phone Call
Touch to enter the phone calling.
4. Phone Book
Touch to enter the phone book lookup.
5. Audio
Touch to enter the audio device operation.
6. Settings
Touch to enter the Bluetooth settings.
SETTINGS
ALTO ANS VER ON
AUDIO PAIRING
PIN CODE
FHONE CONNECT AUTO
PHONE PAIRING i
Touch the icon 1~5, when item is changed to yellow color, the item is selected. And
touch it again and the item is changed to green color, the operation is active.
- 27 -
CONTRAST
Following options are available for the CONTRAST:
0 2 4 6 8 10 12
HUE
Following options are available for the HUE:
6 4 -2 0 +2 +4 +6
SATURATION
Following options are available for the SATURATION:
0 2 4 6 8 10 12
SPEAKER SETUP
SG m= + 4 4
SPEAKER SETUP
DOWNMIX
FRONT
EXIT SETUP
DOWNMIX
Following options are available for the DOWNMIX:
LT/RT STEREO VSS
FRONT
Following options are available for the FRONT:
LARGE SMALL
DIGITAL SETUP
2 {№ Y uv A
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DYNAMIC RANGE
Following options are available for the DYNAMIC RANGE:
FULL 6/8 4/ 8 2/8 OFF
DUAL MONO
Following options are available for the DUAL MONO:
STEREO MONO L MONO R MIX MONO
- 26 -
DISP sem E
1. Capture Image
Touch to capture the current playing image and store into memory for background or
screen saver.
3. Display
Touch to display the current playback information on the screen.
4. Repeat
Touch to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD playback.
Touch to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback.
Touch to repeat as REPEAT ONE-REPEAT ALL-REPEAT OFF when MP3 playback.
5. Direction Arrows Keyboard
Touch to display the [Direction Arrows Keyboard] on the left side of screen. Touch
repeatedly to move the [Direction Arrows Keyboard] icons on the right side or left side
of screen.
MENU MOVE REP. DISP SETUP
6. Menu
Touch to go to the menu of disc when playing DVD disc.
7. Switch
Touch to access the 1% page of DVD menu.
- 23 -
2. Setup
Touch to access the DVD SETUP menu.
Touch the [<] / [>] icons to switch the main menus as following:
SYSTEM — LANGUAGE - VIDEO — SPEAKER — DIGITAL
Touch the [A]/ [V] icons to access the submenus from main menus.
Touch the [A] icon on the top submenu or [V] icon on the bottom of submenu to exit
the submenus to main menus.
Touch the [A]/ [V] icons to select the submenus as your need.
Touch the [>] or [ENTER] icons to access the items of submenus.
Touch the [<] icon to exit the items of submenus.
Touch the [V]/ [A] icons to select the item you want to change.
Touch the [OK] icon to confirm the item you have selected and exit to the submenus.
Touch the [OK] icon on the submenu EXIT SETUP to exit the DVD SETUP Menu and
save all settings.
SYSTEM MENU
QG #5 Ta “H
SYSTEM SETUP
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV TYPE
Following options are available for the TV Display:
4:3PS 4:3LB 16:9
PASSWORD
Setup the password for Parental Ratings change. The default password is 0000.
RATING
Following options are available for the Parental Ratings:
1 KID SAFE 26 3 PG 4 PG 13
5PG-R 6 R 7NC-17 8 ADULT
The Parental Ratings could be changed after the correct password input.
DEFAULT
The unit will restore all default settings by selecting this option.
- 24 -
LANGUAGE SETUP
Og FM
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
OSD LANGUAGE
Following options are available for the OSD LANGUAGE:
ENGLISH GERMAN SPANISH FRENCH PORTUGUESE
ITALIAN RUSSIAN DUTCH SWEDISH KOREAN
DANISH NORWEGIAN POLISH HUNGARIAN
AUDIO LANGUAGE
Following options are available for the AUDIO LANGUAGE:
ENGLISH GERMAN SPANISH FRENCH PORTUGUESE
ITALIAN RUSSIAN DUTCH SWEDISH KOREAN
DANISH NORWEGIAN POLISH HUNGARIAN
SUBTITLE LANGUAGE
Following options are available for the SUBTITLE LANGUAGE:
ENGLISH GERMAN SPANISH FRENCH PORTUGUESE
ITALIAN RUSSIAN DUTCH SWEDISH KOREAN
DANISH NORWEGIAN POLISH HUNGARIAN
MENU LANGUAGE
Following options are available for the MENU LANGUAGE:
ENGLISH GERMAN SPANISH FRENCH PORTUGUESE
ITALIAN RUSSIAN DUTCH SWEDISH KOREAN
DANISH NORWEGIAN POLISH HUNGARIAN
VIDEO SETUP
5m « *
AIDEO SETUP
BRIGHTNESS
NOE
H
SATUATION
EXIT SETUP
BRIGHTNESS
Following options are available for the BRIGHTNESS:
0 2 4 6 8 10 12
- 25 -