Impedance Analyzer - Agilent Technologies

Impedance Analyzer - Agilent Technologies
Agilent 4395A
Network/Spectrum/
Impedance Analyzer
Configuration Guide
Ordering Guide
The following steps will guide you through configuring your 4395A.
Standard Furnished Item
Description
Additional Information
CD-ROM Manual
Contains Operation manual, Programming manual and Instrument BASIC User’s
Handbook in PDF. See documentation option for printed manuals.
Sample Program Disk
Contains sample programs in two disks (3.5 inch)
INTUILINK CD
Contains Intuilink software for 4294A/4395A/4396B
Power Cable
Certificate of Calibration
Note: The following are not furnished: Printed copies of Manuals, Keyboard and test fixture. Refer to Accessory Option, Documentation Option and
Available Accessories for the selection of these items.
Important Selection Guide:
When Impedance Measurement function is required, be sure to select 4395A-010 at Step 3 and 43961A from
Impedance Measurement Accessories.
Step 1. Choose Hardware Option (Mandatory)
Description
Option No.
Requires
Not
Compatible
Additional Information
No DC Bias Source
4395A-700
None
4395A-001
DC bias source is not installed.
Add DC Bias Source
4395A-001
None
4395A-700
DC bias source variable from 0 to ± 40 V/
± 100 mA
Standard Frequency Reference
4395A-800
None
4395A-1D5
High Stability Frequency
Reference
4395A-1D5
None
4395A-800
This option improves the frequency
accuracy and stability of the 4395A.
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Step 2. Choose Hardware Option (Mandatory)
Description
Option No.
Requires
Not
Compatible
No Time-Gated Spectrum
Analysis
4395A-706
None
4395A-1D6
Time-gated spectrum analysis function is
not installed.
Time-Gated Spectrum Analysis
4395A-1D6
None
4395A-706
Adds the time-gated spectrum
measurement function for analyzing
intermittent/burst signal spectrum
Additional Information
Note: Refer to Hardtware Upgrade for retrofit information on the above options.
Step 3. Choose Software Option (If not required, go to Step 4)
Description
Option No.
Requires
Not
Compatible
Additional Information
Impedance Measurement
Function
4395A-010
43961A
None
Adds impedance measurement function
Note: Refer to Software Upgrade for retrofit information on the above option.
2
Step 4. Choose Accessory Option (If not required, go to Step 5)
Description
Option No.
Requires
Not
Compatible
50 Ω – 75 Ω Minimum Loss
Pad
4395A-1D7
None
None
Adds minimum loss pad for converting
impedance of spectrum measurement input
port into 75 Ω from 50 Ω
Keyboard
4395A-810
None
None
PS/2 keyboard for using Instrument Basic
Rackmount Kit
4395A-1CM
None
None
Not installable simultaneously with
4395A-1CP
Front Handle Kit
4395A-1CN
None
None
Not installable simultaneously with
4395A-1CP
Handle/Rack Mount Kit
4395A-1CP
None
None
Not installable simultaneously with
4395A-1CM or 1CN
Additional Information
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Step 5. Choose Documentation Option (If not required, go to Step 6)
Description
Option No.
Additional Information
U.S. - English Localization
4395A-ABA
Japan - Japanese Localization
4395A-ABJ
Printed manuals are not furnished. Order documentation option
if required.
Service Manual
4395A-0BW
Step 6. Choose Calibration Certificate Option (If not required, go to Step 7)
Description
Option No.
Additional Information
17025 Compliant Calibration
4395A-1A7
ISO 17025 compliant calibration
ANSI Z540 Compliant Calibration
4395A-A6J
ANSI Z540 compliant calibration
Step 7. Choose Warranty Plan
1-year Return-to-Agilent Warranty and Service Plan are standard. For extended warranty options and additional
information, contact your local Agilent sales office or visit the Agilent home website.
3
Hardware Upgrade
Customer
Installable
Requires
(Instrument
must already
include the
following)
Not
Compatible
Additional
Information
Option No.
Description
Upgrade
Model No.
or Equivalent
Part Number
4395A-001
Add DC Bias Source
4395U-001
No
None
None
Installable at
service center
only
4395A-1D5
High Stability
Frequency Reference
4395U-1D5
No
None
None
Installable at
service center
only
4395A-1D6
Time-Gated
Spectrum Analysis
4395U-1D6
No
None
None
Installable at
service center
only
4395A-1D7
50 Ω – 75 Ω Minimum
Loss Pad
11852B-004
Yes
None
None
4395A-810
Keyboard
1150-7970
Yes
None
None
4395A-1CM
Rackmount Kit
5063-9216
Yes
None
4395A-1CP
4395A-1CN
Front Handle Kit
5063-9229
Yes
None
4395A-1CP
4395A-1CP
Handle/Rack Mount Kit
5188-4430
Yes
None
4395A-1CM
4395A-1CN
Note: For details of the upgrade information, refer to product homepage on the Agilent home website.
Software Upgrade
Option No.
Description
4395A-010
Impedance
Measurement Function
Upgrade
Model No.
or Equivalent
Part Number
Customer
Installable
4395U-010
Yes
Requires
(Instrument
must already
include the
following)
None
(43961A
Impedance
Test Kit is
required)
Not
Compatible
Additional
Information
None
See Available
Accessories
for additional
information on the
43961A Impedance
Test Kit
Note: For firmware update and upgrade information, refer to the product homepage on the Agilent home website.
4
Available Accessories – Network Measurement Accessories
Description
Model Number
Requires
(Instrument
must already
include the
following)
50 Ω S-Parameter Test Set
87511A
None
100 kHz to 500 MHz. Interconnect cable, RF
connection cables and Operation and Service
Manual are furnished. Choose mandatory option
87511A-800 or 001.
87511A-800
None
7 mm test port
87511A-001
None
Type-N test port
87511A-1A7
None
ISO 17025 compliant calibration
87511A-907
None
Front handle kit
87511A-908
None
Rackmount kit
87511A-909
None
Handle and Rackmount kit
87511A-910
None
Extra operation manual
87511B
None
100 kHz to 500 MHz; Type-N test port. Interconnect
cable, RF connection cables and Operation and
Service Manual are furnished.
87511B-1A7
None
ISO 17025 compliant calibration
87511B-907
None
Front handle kit
87511B-908
None
Rackmount kit
87511B-909
None
Handle and Rackmount kit
87511B-910
None
Extra operation manual
85046A
None
300 kHz to 3 GHz; 7 mm test port. Interconnect
cable, type-N connection cables and Operation and
Service Manual are furnished. Choose mandatory
option 85046A-001 or 009.
85046A-001
None
Solid state switch
85046A-009
None
Mechanical test port transfer switch
85046A-UK6
None
Commercial Cal Certificate with test data
85046A-908
None
Rackmount kit
85046A-910
None
Additional copy of manual, English
85046A-913
None
Handle and Rackmount kit
85046A-ABJ
None
Japan - Japanese Localization
75 Ω S-Parameter Test Set
50 Ω S-Parameter Test Set
5
Additional Information
Available Accessories – Network Measurement Accessories – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
75 Ω S-Parameter Test Set
85046B
None
300 kHz to 2 GHz; Type-N test port. Interconnect
cable, type-N connection cables and Operation and
Service Manual are furnished. Choose mandatory
option 85046B-001 or 009.
85046B-001
None
Solid state switch
85046B-009
None
Mechanical test port transfer switch
85046B-UK6
None
Commercial Cal Certificate with test data
85046B-908
None
Rackmount kit
85046B-913
None
Handle and Rackmount kit
85046B-ABJ
None
Japan - Japanese Localization
50 Ω Transmission/
Reflection Test Kit
87512A
None
50 Ω (DC to 2 GHz), type-N connectors. Operation
and Service Manual is furnished.
75 Ω Transmission/
Reflection Test Kit
87512B
None
75 Ω (DC to 2 GHz), type-N connectors. Operation
and Service Manual is furnished.
50 Ω 2-Way Power Splitter
11667A
None
DC to 18 GHz; type-N connectors.
Operation and Service Manual is furnished.
50 Ω RF Bridge
86205A
None
300 kHz to 6 GHz; type-N connectors.
Operation and Service Manual is furnished.
75 Ω RF Bridge
86207A
None
300 kHz to 3 GHz; type-N connectors.
Operation and Service Manual is furnished.
Additional Information
Note: For more detailed information, refer to RF and Microwave Test Accessories Catalog.
Available Accessories – Network/Spectrum Measurement Accessories
Description
Model Number
Requires
(Instrument
must already
include the
following)
50 Ω Accessory Kit
11853A
None
Accessory kit 50 Ω; Contains type-N Short
terminations and barrels required for test setups.
Operation and Service manual is furnished.
50 Ω Accessory Kit
11854A
None
Accessory kit 50 Ω; Contains type-N to BNC
adapters and type-N Short termination required for
test setups.
Operation and Service manual is furnished.
6
Additional Information
Available Accessories – Network/Spectrum Measurement Accessories – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
75 Ω Cable Set
11857B
None
Cable set 75 Ω, type-N, 61 cm long.
Operation and Service manual is furnished.
11857B-201
None
Phase matched
11857B-B24
None
Delete phase match requirement
11857D
None
Cable set 50 Ω, 7 mm connectors, 61 cm long.
Operation and Service manual is furnished.
11857D-201
None
Phase matched
11857D-B24
None
Delete phase match requirement
50 Ω Cable
N6314A
None
Cable 50 Ω, type-N (male) to type-N (male),
61 cm. User’s Guide is furnished.
50 Ω Cable
N6315A
None
Cable 50 Ω, type-N (male) to type-N (female),
61 cm. User’s Guide is furnished.
Active Probe
41800A
None
5 Hz to 500 MHz active probe, 100 kΩ (probe alone)
/ 1 MΩ (with 10:1 or 100:1 divider).
Probe to BNC adapter, hook tip adapter, slip-on tip
adapter, 10:1 and 100:1 dividers and Operation Note
are furnished.
41800A-UK6
None
Commercial Cal Certificate with test data
41802A
None
5 Hz to 100 MHz 1 MΩ input adapter; Compatible
with oscilloscope probes (designated).
41802A-ABA
None
U.S. - English Localization
41802A-UK6
None
Commercial Cal Certificate with test data
Probe
85024A
None
300 kHz to 3 GHz high frequency probe for in-circuit
measurement.
Probe tip to type-N Adapter, 10:1 divider, hook tip
adapter, slip-on tip adapter, leads and User’s and
Service Guide are furnished.
Differential Probe
1141A
None
(1142A is
required)
DC to 200 MHz differential probe; 1 MΩ. 10x/100x
attenuator adapters, AC coupling adapter, minigrabbers, leads and User and Service Guide are
furnished. The 1142A is required.
Probe Control and Power
Module
1142A
None
Probe control and power module for the 1141A
Active Differential Probe. User and Service Guide is
common to the 1141A.
Close Field Probe
11940A
None
30 MHz to 1 GHz close field probe; hand held.
Operation Note is furnished.
11940A-001
None
Rotary joint attachment
11940A-003
None
Does not include RG223 dbl-shielded cable/adapters.
50 Ω Cable Set
1 MΩ Input Adapter
7
Additional Information
Available Accessories – Network/Spectrum Measurement Accessories – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
Close Field Probe
11941A
None
9 kHz to 30 MHz close field probe; hand held.
Operation Note is furnished.
11941A-001
None
Rotary joint attachment
11941A-003
None
Does not include RG223 dbl-shielded cable/adapters
11945A
None
Close field probe set. Operation Note is furnished.
11945A-001
None
Rotary joint attachment
11945A-003
None
Does not include RG223 dbl-shielded cable/adapters
11945A-E51
None
11909A Preamplifier with carrying case
Close Field Probe Set
Additional Information
Note: For more detailed information, refer to RF and Microwave Test Accessories Catalog.
Available Accessories – Impedance Measurement Accessories
(4395A Option 010 and 43961A are minimum requirements for impedance measurements)
Description
Model Number
Requires
(Instrument
must already
include the
following)
Impedance Test Kit
43961A
4395A-010
Impedance test kit; Contains impedance test
adapter, N (m)-N (m) cable, Open/Short/Load
terminations, carrying case and Notice.
Parallel Electrode SMD Test
Fixture
16196A
4395A-010,
43961A
For 1608 (mm) / 0603 (inch) SMD up to 3 GHz
16196A-710
None
Adds magnifying lens and tweezers
16196A-ABA
None
U.S. – English localization
16196A-ABJ
None
Japan – Japanese localization
16196B
4395A-010,
43961A
For 1005 (mm) / 0402 (inch) SMD up to 3 GHz
16196B-710
None
Adds magnifying lens and tweezers
16196B-ABA
None
U.S. – English localization
16196B-ABJ
None
Japan – Japanese localization
16196C
4395A-010,
43961A
For 0603 (mm) / 0201 (inch) SMD up to 3 GHz
16196C-710
None
Adds magnifying lens and tweezers
16196C-ABA
None
U.S. – English localization
16196C-ABJ
None
Japan – Japanese localization
Parallel Electrode SMD Test
Fixture
Parallel Electrode SMD Test
Fixture
8
Additional Information
Available Accessories – Impedance Measurement Accessories – continued
Requires
(Instrument
must already
include the
following)
Description
Model Number
Parallel Electrode SMD Test
Fixture
16196D
4395A-010,
43961A
For 0402 (mm) / 01005 (inch) SMD up to 3 GHz
16196D-710
None
Adds magnifying lens and tweezers
16196D-ABA
None
U.S. - English localization
16196D-ABJ
None
Japan – Japanese localization
16194A
4395A-010,
43961A
For SMD and leaded device up to 2 GHz,
Temperature range: -55 °C to +200 °C.
50 Ω working standard resistors, wrench, tweezers
and Operation and Service Manual are furnished.
16194A-010
None
Adds EIA/EIAJ size shorting bar set
16194A-701
None
Adds Shorting bar set; (1 x 1 x 2.4, 1.6 x 2.4 x 2,
3.2 x 2.4 x 2.4, 4.5 x 2.4 x 2.4) mm
16197A
4395A-010,
43961A
For SMD from 1005 (mm) / 0402 (inch) to 3225 (mm)
/ 1210 (inch); up to 3 GHz.
Device guides, EIA/EIAJ size shorting bar set,
tweezers, wrench, magnifying lens, carrying case
and Operation and Service Manual are furnished.
16197A-001
None
Adds 0603 (mm) / 0201 (inch) device guide
16197A-ABA
None
U.S. - English localization
16197A-ABJ
None
Japan – Japanese localization
SMD Test Fixture
16092A
4395A-010,
43961A
For SMD and leaded device up to 500 MHz.
Operation Note is furnished.
Parallel Electrode SMD Test
Fixture
16192A
4395A-010,
43961A
For SMD up to 2 GHz. Operation and Service
Manual is furnished.
16192A-010
None
Adds EIA/EIAJ size shorting bar set
16192A-701
None
Adds Shorting bar set; (1 x 1 x 2.4, 1.6 x 2.4 x 2,
3.2 x 2.4 x 2.4, 4.5 x 2.4 x 2.4) mm.
16192A-710
None
Adds magnifying lens and tweezers.
16200B
4395A-010,
43961A
External DC bias adapter; 5 A max or 40 V max,
1 MHz to 1 GHz.
Operation and Service Manual is furnished.
16200B-001
None
Adds Shorting bars and 51 Ω working standard
resistors set; from 0603 (mm) / 0201 (inch) to
3216 (mm) / 1206 (inch).
High Temperature Test
Fixture
Bottom Electrode SMD Test
Fixture
DC Bias Adapter
9
Additional Information
Available Accessories – Impedance Measurement Accessories – continued
Requires
(Instrument
must already
include the
following)
Additional Information
Description
Model Number
Test Fixture
16093-65003
4395A-010,
43961A
Equivalent to previous 16093A; For leaded device
up to 250 MHz.
Test Fixture
16093-65004
4395A-010,
43961A
Equivalent to previous 16093B; For leaded device
up to 125 MHz.
Probe Test Fixture
16094-65000
4395A-010,
43961A
Equivalent to previous 16094A; For in-circuit
measurement up to 125 MHz.
Recommended test cable is 8120-4779.
Test Cable
8120-4779
4395A-010,
43961A
7-mm connector cable recommended for using
16094-65000; Cable length 60 cm
Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements.
Available Accessories – Calibration Kits
Description
Model Number
Requires
(Instrument
must already
include the
following)
50 Ω Calibration kit
85031B
None
Calibration kit 50 Ω; Contains 7 mm Open/Short, 50
Ω Load terminations and Operation and Service
Manual.
85031B-1A7
None
ISO 17025 compliant calibration
85031B-A6J
None
ANSI Z540 compliant calibration
85031B-UK6
None
Commercial Cal Certificate with test data
85032F
None
Calibration kit 50 Ω; Contains type-N Open, Short,
50 Ω Load terminations and, Operation and Service
Manual.
85032F-100
None
Adds Type-N 50 Ω female-to-female adapter
85032F-200
None
Adds Type-N 50 Ω male-to-male adapter
85032F-300
None
Adds Type-N 50 Ω female-to-male adapter
85032F-500
None
Adds four 7 mm to type-N 50 Ω adapters
85032F-1A7
None
ISO 17025 compliant calibration
85032F-A6J
None
ANSI Z540 compliant calibration
85032F-UK6
None
Commercial Cal Certificate with test data
50 Ω Calibration kit
10
Additional Information
Available Accessories – Calibration Kits – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
50 Ω Calibration kit
85033E
None
Calibration kit 50 Ω; Contains 3.5 mm Open, Short
and 50 Ω Load terminations, OSL holder and
Operation and Service Manual.
85033E-100
None
Adds 3.5 mm female-to-female adapter
85033E-200
None
Adds 3.5 mm male-to-male adapter
85033E-300
None
Adds 3.5 mm female-to-male adapter
85033E-400
None
Adds four 3.5 mm to type-N adapters
85033E-500
None
Adds four 3.5 mm to 7mm adapters
85033E-1A7
None
ISO 17025 compliant calibration
85033E-A6J
None
ANSI Z540 compliant calibration
85033E-UK6
None
Commercial cal. Certificate with test data
85036B
None
Calibration kit 75 Ω; Contains type-N Open, Short,
75 Ω Load terminations, type-N adapters and
Operation and Service Manual.
85036B-1A7
None
ISO 17025 compliant calibration
85036B-A6J
None
ANSI Z540 compliant calibration
85036B-UK6
None
Commercial Cal Certificate with test data
75 Ω Calibration kit
Additional Information
Note: For more detailed information, refer to RF and Microwave Test Accessories Catalog.
Literature Resource
Title
Publication Number
4395A Data Sheet
5965-9340E
LCR Meters, Impedance Analyzers and
Test Fixtures Selection Guide
5952-1430E
Accessories Selection Guide For
Impedance Measurements
5965-4792E
Impedance Measurement Handbook
5950-3000
RF and Microwave Test Accessories Catalog
5968-4314EN
Additional Information
Note: More literature is available on the Agilent home website.
Web Resource
Have access to the following website to acquire the latest news, product and support information, application literature and more.
Impedance Analyzers htttp://www.agilent.com/find/impedance
11
www.agilent.com
Remove all doubt
Our repair and calibration services will get your equipment
back to you, performing like new, when promised. You will
get full value out of your Agilent equipment throughout
its lifetime. Your equipment will be serviced by Agilenttrained technicians using the latest factory calibration
procedures, automated repair diagnostics and genuine
parts. You will always have the utmost confidence in
your measurements.
Agilent offers a wide range of additional expert test
and measurement services for your equipment, including
initial start-up assistance onsite education and
training, as well as design, system integration, and
project management.
For more information on repair and calibration
services, go to
www.agilent.com/find/removealldoubt
www.agilent.com/find/emailupdates
Get the latest information on the products and
applications you select.
For more information on Agilent Technologies’ products, applications
or services, please contact your local Agilent office. The
complete list is available at:
www.agilent.com/find/contactus
Americas
Canada
Latin America
United States
(877) 894-4414
305 269 7500
(800) 829-4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Thailand
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
1 800 226 008
Europe & Middle East
Austria
Belgium
Denmark
Finland
France
01 36027 71571
32 (0) 2 404 93 40
45 70 13 15 15
358 (0) 10 855 2100
0825 010 700*
*0.125 €/minute
07031 464 6333
1890 924 204
972-3-9288-504/544
39 02 92 60 8484
31 (0) 20 547 2111
34 (91) 631 3300
0200-88 22 55
0800 80 53 53
44 (0) 118 9276201
Germany
Ireland
Israel
Italy
Netherlands
Spain
Sweden
Switzerland
United Kingdom
Other European Countries:
www.agilent.com/find/contactus
Revised: October 1, 2008
Product specifications and descriptions in this document
subject to change without notice.
© Agilent Technologies, Inc. 2009
Printed in USA, April 22, 2009
5989-8320EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement