User Manual iStick/ iBar
Model: iStick 2
Thanks for purchasing iStick! The compact multiple-purpose portable battery and charger designed to power and recharge batteries of variety of portable electronic devices including most cellular phones, game consoles, digital cameras, MP3/MP4 players, and Bluetooth headsets while you travel. This user manual outlines the operating procedure and safety precautions. Please read this manual carefully to make sure you are using the iStick properly, and retain for future reference.
Safety Precaution
Please note the following precautions before using the iStick. Failure to comply with instructions may potentially cause damages to your portable electronic devices.
1. iStick contains internal Lithium ion (Li-ion) battery with 2200 mAh capacity (Some models have higher capacity). Upon initial use (or after a prolonged storage period), the iStick requires a full charge before use. The iStick’s full performance is achieved only after 2 or 3 complete charge and discharge cycles.
2. Use only the specified AC power Adaptor, connecting cable or power tips are included.
3. Using an incorrect AC power Adaptor, connecting cable, or power tips can damage your portable electronic devices and the iStick.
4. Always charge iStick main unit in a well-ventilated area. Don’t leave the iStick in hot or cold places.
5. Don’t immerse the iStick in water, or expose to moisture or rain.
6. Do not drop, knock, or shake the iStick. Rough handling can break internal precision components or circuit boards.
7. Keep the iStick, its power tips, and parts out of the reach of small children.
8. After charging of your portable electronic device, the surface of iStick exhibits temperature increase. This is a normal state as charging/discharging generates heat.
9. Keep the iStick away from fire or other sources of extreme heat. Exposure of the iStick to extreme heat may result in an explosion.
10. Do not short-circuit. A short-circuit may cause damage to the iStick.
11. Disassemble or modification iStick will void manufacturer warranty
12. Always follow regulations in force and power off your phone or portable electronic devices whenever it is forbidden to use, i.e. during flight landing or taking-off, or near the medical facility with precision equipment, when it may cause interference or potential damage.
Don’t use the iStick to charge your devices under these conditions.
Product Overview
1. Charging ports: IN – to charge iStick, OUT – to connect and charge to your device.
2. Capacity/ Status Indicator
Power Level LED Shows the remaining power
80%~100%
55%~80%
25%~55%
0%~25%
Charging iStick
1. Using micro USB cable to charge iStick. Plug the USB cable to your USB wall charger (not included) or computer’s USB port to iStick. The LED light flashes while iStick is being charged.
IN
2. Upon initial use or after a prolonged storage period, the iStick should be fully charged in approximately 4 hours. The LED lights indicate the level of battery powers available. When all power LED lights are lit, iStick is fully charged. iStick stops charging automatically when it is fully charged.
Charging your devices
The iStick charges electronic devices using DC-5V electrical current. Standard changing cable and device connectors are included; iStick is compatible with most mobiles and digital equipment with micro USB,
Nokia, iPhone 4, iPhone 5, etc.
Following the following steps to charge your USB devices:
Step 1 – Identify the adapter on the charging cable that fits your device. iPhone 4/ iPad
Micro USB (Android type Phones) iPhone 5/5C/5S
Step 2 – Insert the standard USB cable to iStick OUT port.
Step 3 – Wait for iStick indicator to light up, usually 1 to 2 seconds.
Step 4 - Plug the cable into you USB devices and start charging. iPhone 5 users - please repeat this step twice for iPhone 5 as iStick needs to register iPhone 5 on the initial connection before start charging.
To your device
OUT
Specifications
Input: DC 5.0V-800 mA
Output: DC 5.3v-800 mA
Capacity: 2200 mAh/ 2600 mAh
Charging time: 3-4 hours
Size: 88*23*23mm
Weight: 76g
Accessories
1. iStick Power Bank
2. 3-in-1 USB Charging cable (Micro USB, iPhone 4, iPhone 5)
3. Vinyl pouch (optional)
Battery Life
The battery in the iStick is Lithium Ion (LI-ion) rechargeable battery. The battery life is limited and will gradually wear out. When the battery in the iStick main unit reaches the end of its cycle life (after several hundreds of times), even if charged correctly, it is noticeably shorter than normal. It is time to buy a new iStick. iStick multi-charger is designed to use with most popular brand of portable electronic devices and different power tips are included as shown in the package. To power your portable electronic devices, make sure the DC (Direct Current) voltage of your portable electronic devices is not exceeding 5.3 volts. If these tip don’t fit your portable electronic devices, please contact your local dealer.
Limited Warranty
The manufacturer, as defined below, if within 6 months of purchase, this device or any part is proven to be defective by reason of faulty workmanship or defects in materials, we will at repair or replaces the unit free of charge for labor or materials on condition that: The original invoice or sales receipt with the date of purchase, or the receipt from the dealer is presented together with the defective unit. The unit has not been modified, repaired, disassembled by any person who is not authorized by manufacturer.
Any defective unit or part shall become the property of manufacturer. The warranty doesn’t cover any damage caused by misuse, drop, hit or neglect.