Black Box DTX5000 User guide

Black Box DTX5000 User guide
DTX5000-CTL-R2
February 2010
MT1000A-85-R4
DTX5000-CTL-R2 Management Appliance (DTX Control)
BLACK BOX
®
These instructions will help you install and use your ServSwitch™ DTX Control appliance
(DTX5000-CTL-R2). If you require further assistance, see the ServSwitch DTX Control
User Guide.
• Disconnect the power from the target device by unplugging the power cord from
either the electrical outlet or the target device. The AC inlet is the main disconnect
for removing power to this product.
1 Installing the DTX5000-CTL-R2 management appliance. Install the
DTX5000-CTL-R2 management appliance in a server rack or in another appropriate
location.
4 Configuring the IP address. To set an IP address for the DTX5000-CTL-R2
management appliance, establish a connection to the serial menu. Use the options on
the serial console menu to configure the network settings for each of the LAN Ports on
the DTX5000-CTL-R2 management appliance. For more information, see the ServSwitch
DTX Control User Guide. You must use the serial port to change the default IP settings
on the DTX5000-CTL-R2 management appliance.
2 Connecting to your network. Connect one end of a CAT5 cable to LAN Port 1
on the back panel of the DTX5000-CTL-R2 management appliance and the other to the
LAN on which all managed units (IQ modules and user stations) are connected.
NOTE: The DTX5000-CTL-R2 management appliance may be connected to two different
networks using LAN Port 1 and LAN Port 2 on the rear panel. Use LAN Port 1
to connect to the network where the IQ and user stations are connected. Use
LAN Port 2 to connect to another network. The administrator can access the
DTX5000-CTL-R2 management appliance via a web browser from a computer
that is connected to networks on either of the LAN ports.
3 Connecting the power supply. Attach one end of the supplied power cord into
the back panel of the DTX5000-CTL-R2 management appliance and attach the other
end to an AC power source.
WARNING: To reduce the risk of electric shock or damage to your equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important
safety feature.
• Plug the power cord into a grounded outlet that is easily accessible at all times.
Customer
Support
Information
5 Accessing the Web Interface. Open Microsoft® Internet Explorer® and type the
URL for the DTX5000-CTL-R2 management appliance in the Address bar. The address
will be in the format http://<<addr>>, where <<addr>> is the IP address assigned to
the DTX5000-CTL-R2 management appliance. For example, using the default settings
on LAN Port 1, the address is http://10.0.0.10. The login screen appears. Log in using
the administrator credentials. (If this is the first login to the DTX5000-CTL-R2
management appliance, use the default login [admin] and default password [password].)
NOTE: If DNS is enabled, the address is the fully qualified host name assigned to the
DTX5000-CTL-R2 management appliance.
To continue, turn this page over…
590-1075-501A
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
SAFETY AND EMC NOTIFICATIONS
WARNING: C
hanges or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European Union
WARNING: This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
Japan
Korea
Safety and EMC Approvals and Markings
USA (UL, FCC), Canada (cUL, ICES-003), European Union (CE), Japan (VCCI), and Russia
(GOST).
Safety Precautions
Certifications for this product are obtained under one or more of the following
designations: CMN (Certification Model Number), MPN (Manufacturer’s Part Number)
or Sales Level Model designation. The designation that is referenced in the certifications
reports and/or certificates are printed on the label applied to this product.
NOTE: T he model designation for the DTX5000-CTL-R2 Management appliance is
CMN:1097.
DANGEROUS VOLTAGE
This symbol is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
INSTRUCTIONS
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.
CAUTION: The appliance contains an internal battery that is used for the real time clock.
This battery is not a field replaceable item, and replacement should not be
attempted by a user. If real time clock errors occur and the battery is
suspected, contact Black Box Technical Support at 724-746-5500
or [email protected]
WARNING: For Service Personnel Only. There is a risk of explosion if the battery is
replaced with an incorrect type. Dispose of used batteries according to the
manufacturer’s instructions.
Rack and Wallmount Safety Considerations
• Elevated Ambient Temperature: If installed in a closed rack assembly, the operation
temperature of the rack environment may be greater than room ambient temperature.
Use care not to exceed the rated maximum ambient temperature of the appliance.
• Reduced Air Flow: Installation of the equipment in a rack should be such that the
amount of airflow required for safe operation of the equipment is not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved because of uneven mechanical loading.
• Circuit Overloading: Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of circuits might have
on overcurrent protection and supply wiring. Consider equipment nameplate ratings
for maximum current.
• Reliable Earthing: Reliable earthing of rackmounted equipment should be maintained.
Pay particular attention to supply connections other than direct connections to the
branch circuit (for example, use of power strips).
© Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks, and ServSwitch is a trademark, of BB
Technologies, Inc. Microsoft and Internet Explorer are registered trademarks of Microsoft Corporation. Any third-party trademarks appearing in this manual are acknowledged to be the
property of their respective owners.
590-1075-501A
DTX5000-CTL-R2, rev. 1 Installation Guide
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement