Multi-purpose Clamp-On Meters

Multi-purpose Clamp-On Meters
Multi-purpose
Clamp-On Meters
Rugged  Accurate
Dependable  Affordable
Rugged and professional,
our complete line of clamp-on
meters offer full functions including:
Aac, Adc, Vac, Ohms, Continuity,
Frequency, Diode Test, TRMS,
%THD, %DF, CF and Peak.
Varying in size and function,
our clamp-on meters provide
a solution to all power quality
measurement needs.
Our products are backed by over 100 years of experience in test and measurement
equipment, and encompass the latest international standards for quality and safety.
 Technical Hotline: (800) 343-1391
 www.aemc.com
Rugged & Professional
Models 500, 502 & 503
FEATURES
►Compact size — fits into your pocket
►400Aac or 400Aac/dc current
­ easurements (model dependent)
m
►600Vac/dc volts measurements
►TRMS measurements (Model 502)
►Resistance measurements to 400Ω
►Continuity with beeper below 40Ω
►Frequency measurements
(Model 502) from V and A
►Hold function to “freeze” readings
►Push-button for easy Adc zeroing
(Model 503)
►Large, easy-to-read 4000-count display
►42-segment analog bargraph
►Supplied with test leads and
soft carrying pouch
APPLICATIONS
Model 502 monitoring phase current on a power panel.
The AEMC® Models 500, 502 and 503 are c­ ompact clamp-on meters that
measure up to the toughest professional standards. They are built into a
rugged mechanical case and are designed using q
­ uality p
­ olycarbonate
materials. These meters offer a complete set of m
­ easurement ranges
and are in compliance with international safety and quality standards to
ensure a professional and reliable m
­ easuring tool.
►Industrial, commercial, HVAC and
r­ esidential ­troubleshooting
►Power panel, junction box and battery
bank ­monitoring
►Electrical testing and t­roubleshooting on
traditional and non-linear loads, such as
adjustable speed d
­ rives and computers
These reliable meters are simple to operate and are Auto-Ranging
— always providing the optimum measurement range and resolution.
They all measure 400Aac, 600Vac, 600Vdc, Resistance, and Continuity
(with beeper). The Model 502 also has a Frequency f­unction sensed
from either current or voltage. The Model 503 is average sensing for
­traditional load ­environments. The Model 502 is a True RMS
clamp-on that provides RMS ­measurements for today’s non-linear
electrical environments, such as variable speed drives or computers.
The Model 503 is a Hall Effect clamp-on that provides both DC and AC
­current m
­ easurements to 400A.
The Models 500, 502 and 503 are compact for comfortable one-handed
operation. The tapered, hooked jaw design f­acilitates maneuvering in
crowded wiring and breaker panels, making it easy to select conductors.
The jaw opening accommodates a 500kcmil cable. The large and easy-toread 4000-count LCD features comprehensive user information s­ ymbols,
such as low battery, p
­ olarity, overload and an analog bargraph for easy
trend readings. All models are equipped with a Data Hold ­function that
freezes the measurement for later viewing.
Models 500, 502 & 503 are s­ upplied with a pair of
test leads and soft c­ arrying case
They are supplied in a padded carrying pouch with leads, batteries and
user manual — ready to go!
2
www.aemc.com
Technical Assistance (800) 343-1391
SPECIFICATIONS
MODELS
ELECTRICAL
AC Current (Auto-Ranging)
Resolution
Accuracy
50 to 60Hz
60 to 500Hz
AC Voltage (Auto-Ranging)
Resolution
Accuracy
50 to 60Hz
60 to 500Hz
Input Impedance
DC Current (Auto-Ranging)
Resolution
Accuracy
DC Voltage (Auto-Ranging)
Resolution
Accuracy
Input Impedance
Resistance-Ohms (Ω)
Resolution
Accuracy
Max Test Voltage
Continuity (
)
Max Test Voltage
Frequency (Hz) (Auto-Ranging)
CURRENT INPUT
Range
20Hz to 4kHz
>4kHz to 10kHz
Accuracy
Min Input Signal
Input Impedance
Overload Protection
VOLTAGE INPUT
Range
10Hz to 4kHz
>4kHz to 40kHz
>40kHz to 400kHz
Accuracy
Min Input Signal
4kHz
40kHz
400kHz
Input Impedance
Overload Protection
Power Source
Power-Off
Low Power Indication
500
502 TRMS
503
0.05 to 400A
0.1A
2% of Reading ± 5cts
2.8% of Reading ± 5cts
0.5 to 600V
0.1V and 1V
1.0% of Reading ± 5cts
1.5% of Reading ± 5cts
1MΩ
–
–
–
–
–
–
–
0.3 to 400Ω
0.1Ω
1.9% of Reading ± 3cts
-1.6VDC
<35Ω
1.5VDC
0.05 to 400Arms
0.01A and 0.1A
1.9% of Reading ± 5cts
2.5% of Reading ± 5cts
0.5 to 600Vrms
0.1V and 1V
1.5% of Reading ± 5cts
1.5% of Reading ± 5cts
1MΩ
–
–
–
0.2 to 600V
0.1V and 1V
1% of Reading ± 2cts
1MΩ
0.2 to 400Ω
0.1Ω
1% of Reading ± 2cts
1.5VDC
<40Ω
1.5VDC
0.05 to 400A
0.01A and 0.1A
1.5% of Reading ± 10cts
2.5% of Reading ± 10cts
0.5 to 600V
0.1V and 1V
0.8% of Reading ± 5cts
1.5% of Reading ± 5cts
10MΩ
0.10 to 400A
0.01A and 0.1A
2.5% of Reading ± 10cts
0.2 to 600V
0.1V and 1V
1% of Reading ± 2cts
10MΩ
0.2 to 400Ω
0.1Ω
1% of Reading ± 2cts
1.5VDC
<40Ω
1.5VDC
–
–
–
–
–
–
1Hz Resolution
10Hz Resolution
0.1% of Reading ± 1ct
2Arms
1MΩ
600Arms
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1Hz Resolution
10Hz Resolution
100Hz Resolution
0.1% of Reading ± 1ct
5Vrms
5Vrms
5Vrms
1MΩ
600Vrms
Two 1.5V AAA batteries (included)
30 minutes
Displayed when the battery is below the required voltage
–
–
–
–
–
–
–
–
–
MECHANICAL
Jaw Opening Size Ø
Dimensions
Weight
1.1" (28mm) – faciliates 500kcmil cable
7.60 x 1.97 x 1.1" (193 x 50 x 28mm)
8.11 oz (230g) with batteries
DISPLAY
Digital Display
Analog Display
Symbol and Scale Range
Polarity
Overload
Sample Rate
3¾ digits LCD display, 4000-count (max. reading 3999)
Fast 42-segment analog bargraph display
Automatic according to range and input signal
Displayed when negative signal applied to input
Displayed when input signal exceeds range
2 samples/sec for the digital display, 20 samples/sec for the analog bargraph
ENVIRONMENTAL
Altitude
Operating Temperature
Storage Temperature
Pollution Degree
2000 m
32˚ to 104˚F (0˚ to 40˚C), <80% RH, non-condensing
14˚ to 140˚F (-10˚ to 60˚C), <70% RH, battery removed
2
SAFETY
Safety Rating
Double Insulation
CE Mark
EN 61010, 300V CAT III
Yes
Yes
Technical Assistance (800) 343-1391
www.aemc.com
3
CONSTRUCTION
Jaw Opening: 1.1" (28mm)
Conductor Size: one
500kcmil cable
Safety barrier – anti-slip guard
Data hold and ranging b
­ utton (Blue)
Lever for jaw opening/
closing
DC zero button (Blue) (Model 503 only)
Rotary range selector switch
LCD display with b
­ argraph
Positive (Red) + input jack
COM (Black) – input jack
Model 503
FUNCTIONS
MODELS
500
502
503
TRMS
–
–
400Aac



400Adc
–
–
600Vac

600Vdc
–
Frequency
–
Bargraph










–
–
Resistance
Continuity
Beeper
Hold
Push button DC Zero
4
www.aemc.com










–



Technical Assistance (800) 343-1391
General Purpose
Models 511, 512 & 514
FEATURES
►Standard size, full function
clamp-on meters
►1000Aac or 1000Aac/dc current
measurements
►750Vac or 1000Vdc volt measurements
►TRMS measurements
(Models 512 and 514)
►Resistance measurements to 4000Ω
►Continuity with beeper below 40Ω
►Frequency measurements from V and A
►Diode test
►1ms Peak function for fast capture
of signals
Fast 1ms Peak
capture of
inrush current
►Hold function to “freeze” readings
►Push-button for easy Adc zeroing
►Large, easy-to-read 4000-count display
►42-segment analog bargraph
►Supplied with test leads and soft
carrying pouch
Model 514 measuring primary current on a machine c­ ontrol system.
The AEMC ® Models 511, 512 and 514 are general p
­ urpose ­
clamp-on meters that measure up to the toughest p
­ rofessional
standards. They are built into a rugged mechanical case and are
designed using quality polycarbonate m
­ aterials. These meters offer
a complete set of measurement ranges and are in compliance with
­international safety and quality standards to ensure professional and
reliable measuring tools. The Models 511 and 512 are Auto-Ranging
and provide the best m
­ easurement range and resolution for
trouble­shooting. They also have a high resolution 40A range.
They measure AC Amps, AC Volts, as well as DC Volts, Ohms, Continuity
(with beeper), Frequency (from V or A) and have a Diode Test f­unction.
The Model 514 also uses Hall Effect sensor technology that p
­ rovides
both DC and AC c­ urrent measurements to 1000A.
The Models 511, 512 and 514 are sized for comfortable, one-handed
operation. The tapered and hooked jaw design f­acilitates maneuvering in ­crowded wiring and breaker panels, m
­ aking it easy to select
­conductors. The jaw opening a
­ ccommodates one 750kcmil cable or two
350kcmil cables. The large and easy-to-read 4000-count LCD features
­comprehensive user information symbols, such as low b
­ attery, polarity,
overload, and an analog bargraph for easy trend r­eadings. All models are
equipped with a Data Hold f­unction that freezes the measurement for later
viewing, Min/Max, and a fast 1ms Peak Hold function for c­ apture of signals.
The Model 511 is average sensing and designed for traditional a
­ verage
responding electrical systems. The Models 512 and 514 are True RMS
clamp-ons that provide RMS measurements for today’s non-linear
­electrical environments.
All models include a pair of test leads (red/black with probe tips),
9V battery, soft carrying pouch and a user manual — ready to go!
Technical Assistance (800) 343-1391
APPLICATIONS
►Commercial, industrial, residential and
HVAC ­troubleshooting
►Power panel, junction box and battery
bank ­monitoring
►AC or DC motor testing
►Power plant troubleshooting
►Electrical testing and troubleshooting on
traditional and non-linear loads, such as
adjustable speed drives and computers
Models 511, 512 & 514 are supplied with a pair of
test leads and soft c­ arrying case
www.aemc.com
5
SPECIFICATIONS
MODELS
ELECTRICAL
AC Current (Auto-Ranging)
Resolution
Accuracy
50 to 60Hz
60 to 500Hz
Overload Protection
40A
400A
1000A
AC Voltage (Auto-Ranging)
Resolution
Accuracy
50 to 500Hz
Input Impedance
Overload Protection
DC Current (Auto-Ranging)
Resolution
Accuracy
Overload Protection
DC Voltage (Auto-Ranging)
Resolution
Accuracy
Input Impedance
Overload Protection
Resistance-Ohms (Ω)
Resolution
400Ω
4000Ω
Accuracy
Max Test Voltage
Overload Protection
Diode Test
Open Circuit Voltage
)
Continuity (
Max Test Voltage
Frequency (Hz) (Auto-Ranging)
CURRENT INPUT
Range
4kHz
10kHz
Accuracy
20Hz to 10kHz
Min Input Signal
4kHz
10kHz
VOLTAGE INPUT
Range
4kHz
10kHz
Accuracy
10Hz to 10kHz
Min Input Signal
4kHz
10kHz
Power Source
Power-Off
Low Power Indication
511
512 TRMS
514 TRMS
0.05 to 1000A
0.01A, 0.1A and 1A
1.9% of Reading ± 5cts
1.9% of Reading ± 5cts
800Arms
1500Arms
1500Arms
0.5 to 750V
0.1V and 1V
1.2% of Reading ± 5cts
10MΩ
1000Vrms
–
–
–
–
0.2 to 1000V
0.1V and 1V
0.75% of Reading ± 2cts
10MΩ
1200Vrms
0.2 to 4000Ω
0.1Ω
1Ω
1% of Reading ± 2cts
3VDC
600Vrms
0.6mA
3VDC
<40Ω
3VDC
0.05 to 1000Arms
0.01A, 0.1A and 1A
1.9% of Reading ± 5cts
1.9% of Reading ± 5cts
800Arms
1500Arms
1500Arms
0.5 to 750Vrms
0.1V and 1V
1.2% of Reading ± 5cts
10MΩ
1000Vrms
–
–
–
–
0.2 to 1000V
0.1V and 1V
0.75% of Reading ± 2cts
10MΩ
1200Vrms
0.2 to 4000Ω
0.1Ω
1Ω
1% of Reading ± 2cts
3VDC
600Vrms
0.6mA
3VDC
<40Ω
3VDC
0.05 to 1000Arms
0.01A, 0.1A and 1A
1.9% of Reading ± 5cts
2.5% of Reading ± 5cts
1200Arms
1200Arms
1200Arms
0.5 to 750Vrms
0.1V and 1Vrms
1.5% of Reading ± 5cts
10MΩ
1000Vrms
1 to 1000A
0.01A, 0.1A and 1A
2.5% of Reading ± 10cts
1200Arms
0.2 to 1000V
0.1V and 1Vrms
1% of Reading ± 2cts
10MΩ
1000Vrms
0.2 to 4000Ω
0.1Ω
1Ω
1% of Reading ± 2cts
3VDC
600Vrms
1.7mA max
3VDC
<40Ω
3VDC
1Hz Resolution
–
0.1% of Reading ± 1ct
2Arms
–
1Hz Resolution
–
0.1% of Reading ± 1ct
2Arms
–
1Hz Resolution
10Hz Resolution
0.1% of Reading ± 1ct
2Arms
5Arms
1Hz Resolution
10Hz Resolution
0.1% of Reading ± 1ct
5Vrms
5Vrms
1Hz Resolution
10Hz Resolution
0.1% of Reading ± 1ct
5Vrms
5Vrms
9V Alkaline battery (included)
30 minutes
Displayed when the battery is below the required voltage
1Hz Resolution
10Hz Resolution
0.1% of Reading ± 1ct
5Vrms
10Vrms
MECHANICAL
Jaw Opening Size Ø
Dimensions
Weight
1.575" (40mm) – faciliates 750kcmil cable or two 500kcmil cables
9.53 x 2.60 x 1.42" (242 x 66 x 36mm)
14.10 oz (400g) with batteries
DISPLAY
Digital Display
Analog Display
Symbol and Scale Range
Polarity
Overload
Sample Rate
3¾ digits LCD display, 4000-count (max. reading 3999)
Fast 42-segment analog bargraph display
Automatic according to range and input signal
Displayed when negative signal applied to input
Displayed when input signal exceeds range
2 samples/sec for the digital display, 20 samples/sec for the analog bargraph
ENVIRONMENTAL
Altitude
Operating Temperature
Storage Temperature
Pollution Degree
2000 m
32˚ to 104˚F (0˚ to 40˚C), <80% RH, non-condensing
14˚ to 140˚F (-10˚ to 60˚C), <70% RH, battery removed
2
SAFETY
Safety Rating
Double Insulation
CE Mark
6
www.aemc.com
EN 61010, 600V CAT III, EN 61010, 1000V CAT II
Yes
Yes
Technical Assistance (800) 343-1391
CONSTRUCTION
Jaw Opening: 1.575" (40mm)
Conductor Size: one
750kcmil cable or two
350kcmil cables
Safety barrier – anti-slip guard
Data hold ­button (Blue)
1ms Peak hold button (Blue)
Lever for jaw opening/
closing
Rotary range selector switch
C/DC select ­button (Model 514)
A
Range button (Models 511 & 512)
Relative button and Adc zero
Maximum/Minimum
button
LCD display with b
­ argraph
Positive (Red) + input jack
COM (Black) – input jack
Model 514
FUNCTIONS
MODELS
TRMS
1000Aac
1000Adc
750Vac
1000Vdc
Resistance
Diode
Continuity
Beeper
Frequency
Bargraph
Hold
Min/Max
1ms Peak
Push button DC Zero
511
512

























–
–
–
Technical Assistance (800) 343-1391
–
–
514















www.aemc.com
7
Hand-Held & Ergonomic in Design
Model 565
FEATURES
►Check for leakage and locate
insulation breakdowns on live circuits
►Measures leakage current down to
0.1mA with up to 10µA resolution
►Measures current up to 100Arms
►Measures voltage up to 600VAC/DC
►Measures Hz on either V or A inputs
►Measures Resistance and Continuity
►Hold feature freezes value
►Max feature keeps track of highest
­measured In-rush value
►Zero button ideal for m
­ easuring
relative values
►Filter to isolate 50/60Hz fundamental
from ­harmonics
►Compatible with VDE 0404
►Backlight display
Measuring leakage current on a ground wire with
the TRMS Leakage Current Meter Model 565
The TRMS Clamp-on Meter Model 565 is designed to measure low AC
currents, which are typically leakage currents in ground conductors. Low
currents are measured on the 60mA and 600mA ranges. Note the high
sensitivity of the probe: 10μA and 100μA. This is possible through special
jaw construction and in particular critical shielding of the jaws.
At low measurement levels, shielding out noise is critical for low
sensitivity, accuracy and stability.
Leakage current may be measured on a ground conductor and through the
vector sum on multi-conductors. On a grounded system, clamp around the
two or three conducting legs (not the ground conductor).
The vector sum of the load currents will cancel out, leaving the
leakage current measured.
The user may also use the Model 565 as a standard clamp-on meter to
measure up to 100Arms, plus standard Vac, Vdc ranges, resistance and
continuity with a buzzer. In mAac and Aac, the user can activate a low-pass
filter to ignore all currents other than 50/60Hz. In this mode, only the fundamental signal is measured. The difference between the full frequency signal
(WIDE displayed on LCD) and Filtered mode (50/60Hz displayed on LCD)
essentially corresponds to the current attributable to Harmonics.
Model 565 includes two color-coded 5 ft test leads,
batteries, soft carrying case and user manual.
The Model 565 is ergonomic in design and fits well in the hand.
Also, one hand operation is possible. The jaw size is compact yet
designed to accommodate most known ground conductors up to
1" (26mm) in diameter.
8
www.aemc.com
Technical Assistance (800) 343-1391
SPECIFICATIONS
MODEL
ELECTRICAL
565
mA AC Current (TRMS, Auto-Ranging)
Measurement Range
Resolution
60mA
600mA
Accuracy
50 to 60Hz
50 to 500Hz
500Hz to 3kHz
AC Current (TRMS, Auto-Ranging)
Measurement Range
Resolution
10A
100A
Accuracy
50 to 60Hz
50 to 500Hz
500Hz to 3kHz
AC Voltage (TRMS)
Measurement Range
Resolution
Accuracy
50 to 60Hz
50 to 500Hz
500Hz to 3kHz
DC Voltage
Measurement Range
Resolution
Accuracy
Frequency (Auto-Ranging)
Function
Resolution
0 to 100Hz
100Hz to 1kHz
Sensitivity
Accuracy
Resistance
Measurement Range
Resolution
Accuracy
Continuity
Measurement Range
Resolution
Buzzer
Overload Protection
Nominal Sample Rate
MAX Sample Rate
Filter
In-Rush
Power Source
Battery Life
Power-Off
Low Battery Indication
0 to 600mA
0.01mA (10μA)
0.1mA (100μA)
1.2% of Reading ± 5cts
2.5% of Reading ± 5cts
3.5% of Reading ± 10cts
10 to 100A
0.001A (1mA)
0.01A (10mA)
1.2% of Reading ± 5cts
2.5% of Reading ± 5cts
3.5% of Reading ± 10cts
0 to 600V
0.1V
1.0% of Reading ± 5cts
1.2% of Reading ± 5cts
2.5% of Reading ± 5cts
0 to 600V
0.1V
1.0% of Reading ± 3cts
A-Hz
0.1Hz
1Hz
10mArms min
0.5% of Reading ± 2cts
V-Hz
0.1Hz
1Hz
5Vrms min
0 to 1kΩ
0.1Ω
1.0% of Reading ± 3cts
0 to 1kΩ
0.1Ω
<35Ω ± 25Ω
660Vrms/150Arms –
is displayed and buzzer will sound
Two measurements per second (approx.)
100ms
On (50/60Hz only); Off (Full frequency range)
Max 100ms sample time
Two 1.5V AAA batteries
45 hrs (approx.)
10 min approx with user override
is displayed when battery voltage is low
MECHANICAL
Dimensions
Jaw Opening Size Ø
Maximum Conductor Size
Weight
8.5 x 2.5 x 1.18" (218 x 64 x 30mm)
1.10" (28mm)
1" (26mm)
10 oz (280g) with batteries
DISPLAY
Display Type
Backlight
Four digit LCD
LED with 180 sec Auto-Off
ENVIRONMENTAL
Operating Temperature
Storage Temperature
32° to 104°F (0° to 40°C); <80% RH (non-condensing)
14° to 140°F (-10° to 60°C); <70% RH (non-condensing)
SAFETY
Safety Rating
Double Insulation
CE Mark
EN 61010-1 Ed. 2001, EN 61010-2-032 Ed. 2003, 600V CAT III
Yes
Yes
Technical Assistance (800) 343-1391
www.aemc.com
9
CONSTRUCTION
Jaw opening: 1.10" (28mm)
Conductor size: 1" (26mm)
Data hold button
Safety barrier anti-slip guard
Lever for opening/closing jaw
Rotary range selector switch
Backlight, Max hold, and
Zero buttons
Typical Points for
Measuring Leakage Current
Backlit display
Positive (Red)
input terminal jack
COM (Black)
input terminal jack
On single phase systems, the Model 565 will measure
leakage current at the source, the load or the ground.
10
www.aemc.com
Technical Assistance (800) 343-1391
For Process &
Industrial Applications
Model CM605
FEATURES
►0.001 to 10A, 10mA to 100A
►10,000-count LCD Display –
1mA
Resolution
Model CM605 testing automotive electrical connectors
The Multifunction Clamp-on Meter Model CM605 is an ideal choice for
both process and general industrial markets. It is also the perfect
instrument for measuring 4 to 20mA process signals, as well as, the
higher currents (up to 100A) associated with general industrial
monitoring and troubleshooting.
The Model CM605 is a versatile device that is capable of measuring
both AC/DC voltages, up to 600V, and AC/DC current. It can also
measure resistance up to 10kΩ and includes a continuity buzzer to
assist in circuit verification.
Excellent Resolution
►100Aac/dc Ammeter with low
10A Range – 1mA Resolution
►Tapered Jaws for crowded wiring areas
(Ø.45" – 12mm Jaw Opening)
►600Vac/dc Voltmeter
►Analog Output in Aac/dc
►Auto-Ranging & Adc Zero Push-button
►Data HOLD & PEAK Functions
►Relative Function to Compare
Two Measurements
►Ohm Range & Continuity Test
with Beeper
►AUTO-OFF and Low Battery Indicator
►IEC/EN 61010 Safety Rated & CE Mark
►600Vrms Overload Protection
APPLICATIONS
►Process loop monitoring
►Automotive electrical troubleshooting
►Industrial plant maintenance
►General AC and DC voltage and
current monitoring
►Continuity checking
For operator convenience, the Model CM605 can also hold the last
reading in the display and capture the peak value at the time of the
measurement.
Model CM605 includes test leads, soft c­ arrying
case and user manual.
Technical Assistance (800) 343-1391
www.aemc.com
11
SPECIFICATIONS
MODEL
ELECTRICAL
AC Current
Measurement Ranges
Accuracy & Resolution
Frequency Range
DC Current (positive only)
Measurement Ranges
Accuracy & Resolution
AC Volts
Measurement Ranges
Accuracy & Resolution
Frequency
Input Impedance
DC Volts (positive only)
Measurement Ranges
Accuracy & Resolution
Input Impedance
Resistance (Ohms)
Measurement Ranges
Accuracy & Resolution
Test Voltage
Continuity
Measurement Ranges
Resolution
Test Voltage
Analog Output
Output
Frequency
Output Impedance
Other Functions
Adc Zero &
Relative Function
HOLD Function
PEAK Function
Auto-Ranging
Over Range
Auto-Off
Low Battery
CM605
2 Ranges: 10A, 100A
10A: 2.0% of Reading ± 10cts - 1mA Resolution
80A: 2.0% of Reading ± 10cts - 10mA Resolution
> 80A: 3.5% of Reading ± 10cts - 10mA Resolution
2 Ranges: 50 to 500Hz
2 Ranges: 10A, 100A
10A: 2.5% of Reading ± 10cts - 1mA Resolution
80A: 2.5% of Reading ± 10cts - 10mA Resolution
> 80A: 4.5% of Reading ± 10cts - 10mA Resolution
600Vrms
1.5% of Reading ± 5cts - 100mV Resolution
40 to 500Hz
10MΩ, < 50pF
600V
1.0% of Reading ± 2cts - 100mV Resolution
10MΩ
10kΩ (9999Ω)
1.0% of Reading ± 3cts - 1Ω Resolution
< 3.0Vdc
Buzzer < 100Ω ± 25Ω
1Ω
< 3.0Vdc
10mV/Aac & Adc through front banana jacks
0 to 20kHz @ ± 3db
3kΩ, < 50pF
One touch push button (ΔZERO Button) to Zero Adc, or other readings.
Relative function also used in the other ranges to compare two measurements.
Holds A & V measurements when pressed (HOLD button)
Captures PEAK (1ms) V or A measurement when activated (PEAK Button)
“AUTO” displayed on LCD
“OL” displayed on LCD for all measurements
Auto-Off after approx 10 minute with Over-Ride
Low Battery indication on LCD
MECHANICAL
Max. Jaw Opening Size Ø
Max. Conductor Size
Power Source
Dimensions & Weight
Ø 0.60" (15mm)
Ø 0.45" (12mm)
Two 1.5V AAA (LR03) batteries (included)
7.95 x 2.76 x 1.33" (202 x 70 x 34mm) – 6.5 oz (180g)
SAFETY
Safety Rating
Double Insulation
CE Mark
12
www.aemc.com
IEC/EN 61010-1 and 2-032 – 600V CAT II and 300V CAT III – Pollution Degree 2
Yes
Yes
Technical Assistance (800) 343-1391
CONSTRUCTION
Tapered jaws for crowded wiring or areas
(Ø.45"- 12mm)
Safety barrier anti-slip guard
Lever for jaw opening/closing
Data hold and Peak hold buttons
Rotary range selector switch
LCD display
Positive (Red)
input terminal jack
COM (Black)
input terminal jack
Measuring AC Current
ER
N MET
600V
CAT II
CLAMP-O
MODEL
ZERO
CM605
CAT II
600V
Press H
2 Sec P PEA
K
100A
CORRECT
600V CAT II 100A
H
Press P PEAK
2 Sec
ZERO
INCORRECT
(two conductors from
different phases)
MODEL CM605
CLAMP-ON METER
600V
CAT II
Technical Assistance (800) 343-1391
www.aemc.com
13
Dual Display Clamp-Ons
Models 670 & 675
FEATURES
►Dual display
►Standard size, full function clamp-on meter
►1000Aac/dc current measurements
(DC Current on Model 675 only)
►1400Vdc volt measurements
►TRMS measurements
►Resistance measurement to 10,000Ω
►Continuity with beeper below 35Ω
►Frequency measurements from
V and A inputs
►1ms Peak function for fast capture
of signals
►Hold function to “freeze” readings
►Designed to measure Amps and
Volts at the same time
►Push-button for easy Adc zeroing
►Large easy-to-read 9999-count
backlit LCD display
►Includes test leads and soft
carrying case
Model 675 measures both volts and amps and displays results
simultaneously.
The AEMC® Models 670 and 675 are general purpose, dual display,
professional clamp-on meters that measure up to the toughest standards.
These meters offer a complete set of measurement functions (AC Amps,
DC Amps [675 only], AC Volts, DC Volts, Ohms, Continuity with beeper,
Frequency from V or A Input, and Temperature) and are in compliance
with international safety and quality standards to ensure professional and
reliable measuring tools.
These meters are designed to measure and display amps and volts at the
same time. They are also auto-ranging and provide the best measurement
range and resolution for troubleshooting.
The Models 670 and 675 are sized for comfortable, one-handed
operation. The tapered and hooked jaw design facilitates maneuvering in
crowded wiring and breaker panels, making it easy to select conductors.
The jaw opening accommodates one 750kcmil cable or two 350kcmil
cables. The large and easy-to-read 9999-count LCD features
comprehensive user information symbols, such as low battery,
polarity and overload. Both models are equipped with a Data Hold function
that freezes the measurement for later viewing and Min/Max, and
Peak function for capture of signals.
The Model 670 and 675 are True RMS clamp-on meters that provide RMS
measurements for today’s non-linear electrical environments.
14
www.aemc.com
APPLICATIONS
►Commercial, industrial, residential and
HVAC troubleshooting
►Power panel, junction box and battery
bank monitoring
►AC or DC motor testing
►Power plant troubleshooting
►Electrical testing and troubleshooting
on non-linear loads, such as adjustable
speed drives and computers
SA
RA
FET Y
TIN G
The 670 and 675 include
meter, set of test leads
(red/black with safety needle
tips), K-type thermocouple,
one 9V battery, soft carrying
case and a user manual.
Technical Assistance (800) 343-1391
SPECIFICATIONS
MODELS
ELECTRICAL
AC Amperes
Range
Measuring Range
Resolution
Accuracy
Overload
DC Amperes
Range
Measuring Range
Resolution
Accuracy
Overload
AC Volts
Range
Measuring Range
Resolution
Accuracy
Input Resistance
Overload
DC Volts
Range
Measuring Range
Resolution
Accuracy
Input Resistance
Overload
Resistance-Ohms
Range
Measuring Range
Resolution
Accuracy
Protection
)
Continuity (
Range
Beeper Activation
Accuracy
Protection
Frequency (Hz)
Function
Range
Resolution
Sensitivity
Accuracy
Temperature (°C/°F)
Range
Measurement Range
Resolution
Accuracy
670 TRMS
100A
0.00 to 99.99A
0.01A
675 TRMS
1000A
100A
100 to 1000A
0.00 to 99.99A
0.1A
0.01A
1.5% ± 5cts (50 to 60Hz), 2.0% ± 5cts (50 to 500Hz), 4.5% ± 5cts (500Hz to 3kHz)
1000Arms
100A
0.00 to 99.99A
0.01A
1.2% ± 5cts
–
–
–
–
–
1000A
100 to 1000A
0.1A
1000A
100.0 to 999.9A
0.1A
2.5% ± 5cts
1400Adc
1400A
1000 to 1400A
1A
2.5% ± 5cts
1000V
0.0 to 999.9V
0.1V
1.0% ± 5cts (50 to 60Hz), 1.2% ± 5cts (50 to 500Hz), 2.5% ± 5cts (500Hz to 3kHz)
1MΩ
1000Vrms
1000V
0.0 to 999.9V
0.1V
1400V
1000 to 1400V
1V
1% ± 2cts
1MΩ
1400Vdc
1000Ω
10,000Ω
0.0 to 999.9Ω
1000 to 9999Ω
0.1Ω
1Ω
1% ± 3cts, 3.3Vdc (Vmax)
1000Vrms
1000V
0.0 to 999.9V
0.1V
1400V
1000 to 1400V
1V
1% ± 2cts
1MΩ
1400Vdc
1000Ω
10,000Ω
0.0 to 999.9Ω
1000 to 9999Ω
0.1Ω
1Ω
1% ± 3cts, 3.3Vdc (Vmax)
1000Vrms
< 35Ω
1% ± 3cts, 3.3Vdc (Vmax)
1000Vrms
A - Hz
1000Hz
0.1Hz
3Arms
1000°C
-40 to 999.5°C
0.5°C
1.0% ± 2°C
V - Hz
10,000Hz
1Hz
5Vrms
1.0% ± 2cts
1200°C
1000 to 1200°C
1°C
1.0% ± 2°C
2192°F
-40 to 2192°F
1°F
1.0% ± 4°F
A - Hz
1000Hz
0.1Hz
3Arms
1000°C
-40 to 999.5°C
0.5°C
1.0% ± 2°C
V - Hz
10,000Hz
1Hz
5Vrms
1.0% ± 2cts
1200°C
1000 to 1200°C
1°C
1.0% ± 2°C
2192°F
-40 to 2192°F
1°F
1.0% ± 4°F
MECHANICAL
Digital Display
Jaw Opening Size Ø
Dimension
Weight
Power Supply
Low Battery Indicator
3 ¾ digits LCD dual display (max reading 9999)
1.65" (42mm)
1.58" (40mm)
10.71 x 3.15 x 1.69" (272 x 80 x 43mm)
10.12 x 3.15 x 1.69" (257 x 80 x 43mm)
17 oz (480g) with battery
15.5 oz (440g) with battery
9V, NEDA 1604 (6F22) Alkaline
is displayed when the voltage supplied by the battery is lower than the operating voltage
ENVIRONMENTAL
Altitude
Operating Temperature
Storage Temperature
Pollution Degree
2000 m
* -14° to 122°F (-25° to 50°C) < 80% RH, non-condensing
-14° to 140°F (-25° to 60°C) < 80% RH, battery removed
2
SAFETY
Safety Rating
Double Insulation
CE Mark
EN 61010-1 Ed.2001; EN 61010-2-032 Ed.2002; 600V CAT IV, 1000V CAT III
Yes
Yes
*Note: If the meter is to be used below 32°F (0°C), we suggest that the battery be replaced to ensure proper results.
Technical Assistance (800) 343-1391
www.aemc.com
15
CONSTRUCTION
Jaw Assembly
Model 670 – 1.65" (42mm)
Model 675 – 1.58" (40mm)
Safety Barrier Anti-slip Guard
Data Hold Button/DC Zero
Rotary Range Selector Switch
Lever for Jaw Opening/Closing
LCD Display
Function Buttons:
• Display
• Min-Max
• Backlight
COM (black) Input
Positive (red) Input
AC Voltage and Current
Measurement Simultaneously
• Clamp the jaws around the
conductor to be measured.
• Voltage and current measurements
will be displayed simultaneously.
• If reading is unstable and is hard to
read, push the HOLD button and
read measurement.
WARNING: If overload " " is displayed,
unclamp the meter immediately .
16
www.aemc.com
WARNING: If overload " " is displayed,
unclamp the meter immediately .
Technical Assistance (800) 343-1391
High Performance
Clamp-On Power Meters Models
F05, F07 & F09
FEATURES
►Hand-held size, ultra practical and
­ergonomic
►True RMS measurement through fast
s­ ampling - accurate on non-linear
waveforms
►4kHz Bandwidth
►3.5 Crest Factor @ 600Arms and 900Vrms
►Peak function captures 500µs signals
►Measure Inrush Current on 0.5, 1, 2.5,
5 and 10 cycles (15 to 70Hz)
►Min/Max for automatic capture of extreme
values on 100ms samples
►Measure V, A, Ohms, kW, PF, VAR, VA,
Hz, Phase Rotation, Temperature, AC + DC
(model dependent)
►Temperature measurement up to 1832°F
(1000°C) via standard K thermocouple
(model dependent)
►Continuity at programmable buzzer
threshold from 1 to 400Ω (model dependent)
►Selectable V-Live™ function (buzzer)
warns of live circuit
The F series is a high performance line of clamp-on meters built into a rugged
compact sized case, with exceptional ergonomic design and extraordinary
►Designed for use with variable frequency
measurement possibilities. These are definitely not your generic off-the-shelf
drives (F05)
clamp-on! They are designed to offer professional measurement possibilities
►
Battery life displays directly in hours at the
rarely seen in a clamp-on meter.
push of a button
Integrating a fast microprocessor sampling at a high rate, they are completely
►
Automatically detects AC or DC and is
automatic and perform TRMS measurements on the most distorted waveforms.
auto-ranging
The Models F05, F07 & F09 offer extraordinary measurement capabilities to the
►Automatic DC current zeroing
professional engineers and electricians who rely on professional
measurement products.
►Backlit LCD
Here are some interesting facts:
►EN 61010-1, EN 61010-2-032,
600V CAT III
• Selected models automatically detect AC or DC in Voltage and Current –
Just select the function.
• All models have a V-Live™ function to warn of the use of live circuits
or elevated voltages. They also auto-range for the best resolution on a
backlit 4000-count display and have Auto-Off to save the battery.
• Models F07 and F09 measure TRMS Voltage and Current and can
incorporate the DC component of the signal for the Truest RMS.
• All models measure in-rush AC currents from one cycle up
to 10 cycles and frequency
• Models F05 and F09 measure Phase Rotation (using only two leads!),
Power Factor and Power. (up to 240kW)
• All models are very ergonomic and can be operated with one hand.
• Other features, based on the model, include Temperature, Min/Max/Peak,
AC/DC adaptor input enabling the use of accessories
(large clamps, light sensors…)
Models F05, F07 & F09 are designed for the industrial environment and offer
enhanced safety specifications. They conform to the demanding international
safety standards with a 600V CAT III rating and are CE marked.
Technical Assistance (800) 343-1391
Models F05, F07 and F09 include test leads, soft
­carrying case and user manual.
www.aemc.com
17
SPECIFICATIONS
MODELS
ELECTRICAL
F05
F07
AC Current (Auto-Ranging)
0.2 to 400A
AC Voltage (Auto-Ranging)
DC Current (Auto-Ranging)
0.2 to 400A
DC Voltage (Auto-Ranging)
0.2 to 600V
F09
0.2 to 600V
AC + DC Current
(Auto-Ranging)
–
0.2 to 400Arms
0.2 to 400Arms
AC + DC Voltage
(Auto-Ranging)
–
600Vrms
600Vrms
Resistance
40kΩ
Diode Test
Yes
Continuity (Beeper)
Yes (w/adjustable threshold)
Frequency
Power (W, VA, VAR)
Power Factor
Phase Rotation
20kHz
240kW
–
5W to 240kW
-1.00 to 1.00
–
-1.00 to 1.00
–
Yes
Yes
Min/Max/Peak
Yes
Hold
Yes
Inrush Current
0.5 to 10 cycles selectable
V-Live™ Hazardous
Voltage Indicators(1)
45Vp
Auto-Off
Yes
Battery Indicator(2)
Yes
Buzzer for Overrange
Yes
Power Source
One 9V Alkaline battery (included)
MECHANICAL
≤ 1.02" (26mm)
Max. Jaw Opening Size Ø
Max. Conductor Size
Adapter (AC/DC)
500kcmil cable
–
Dimensions
0 to 4000mV
–
2.76 x 7.6 x 1.46" (70 x 193 x 37mm)
Weight
9.17 oz (260g)
DISPLAY
Backlight
Yes
ENVIRONMENTAL
Temperature (int or ext)
–
-50° to 1832°F (-10° to 1000°C)
SAFETY
Safety Rating
EN 61010-1, EN 61010-2-032, 600V CAT III
Double Insulation
Yes
CE Mark
Yes
(1)
Indicates
(2)
voltage higher than instrument rating
Remaining time expressed in hours on Models F05 and F07
18
www.aemc.com
Technical Assistance (800) 343-1391
–
CONSTRUCTION
Jaw Opening: ≤1.02" (26mm)
Conductor Size: one 500kcmil cable
Anti-slip guard
Rotary function selector
Access key for functions
outlined in yellow
around the selector
Jaw opening trigger
Hold function + Auto zero DC and lead compensation
Backlight function
MIN, MAX and PEAK functions
Hz button
Liquid crystal display
Recessed safety
input terminals
FUNCTIONS
MODELS
F05
F07
F09
AC, DC
AC, DC, AC+DC
AC, DC, AC+DC










–







































TRMS
Measurement
AC/DC Current
AC/DC Voltage
Power (W, VA, var, PF)
Single- and 3-Phase
Phase Rotation
(W and PF single-phase only)
Motor Start-Up (InRush)
Temperature
Frequency
Backlit LCD Display
Automatic Switch-Off
Display Hold Function
Battery Level Indicator
Presence of Dangerous Voltage
(V-live)
Automatic AC/DC
Choice of Automatic/Manual Mode
Automatic Zero DC
Lead Resistance Compensation
Min/Max 100ms
Peak 500μs
–
Technical Assistance (800) 343-1391


–
www.aemc.com
19
SELECTION CHART
MODELS
Type
AC Current
AC Voltage
DC Current
DC Voltage
Resistance (Ω)
AC
0.05 to 400A
0.5 to 600V
–
–
400Ω
AC TRMS
0.05 to 400A
0.5 to 600V
–
0.2 to 600V
400Ω
AC/DC
0.05 to 400A
0.5 to 600V
0.10 to 400A
0.2 to 600V
400Ω
AC
0.05 to 1000A
0.5 to 750V
–
0.2 to 1000V
4000Ω
AC TRMS
0.05 to 1000A
0.5 to 750V
–
0.2 to 1000V
4000Ω
AC/DC TRMS
0.05 to 1000A
0.5 to 750V
1 to 1000A
0.2 to 1000V
4000Ω
AC TRMS
0 to 600mA;
10 to 100A
0 to 600V
–
0 to 600V
0 to 1kΩ
AC/DC
1mA to 100A
600Vrms
1mA to 100A
600V
0 to 9999Ω
AC TRMS
0 to 1000A
0 to 1000V
–
1000 to 1400V
1000 to 10,000Ω
AC/DC TRMS
0 to 1000A
0 to 1000V
0 to 1400A
0 to 1400V
0 to 9999Ω
AC/DC TRMS
0.2 to 400A
0.2 to 600V
0.2 to 400A
0.2 to 600V
40kΩ
AC/DC TRMS
0.2 to 400A
0.2 to 600V
0.2 to 400A
0.2 to 600V
40kΩ
AC/DC TRMS
0.2 to 400A
0.2 to 600V
0.2 to 400A
0.2 to 600V
40kΩ
500
502
503
511
512
514
565
CM605
670
675
F05
F07
F09
20
www.aemc.com
Technical Assistance (800) 343-1391
MODELS
Continuity
Frequency (Hz)
Current Voltage
True RMS
Jaw Size
Dimensions
Catalog No.
500
<35Ω
–
–
–
1.1" (28mm)
7.60 x 1.97 x 1.1"
2117.54
<40Ω
20Hz to
10kHz
10Hz to
400kHz

1.1" (28mm)
7.60 x 1.97 x 1.1"
2117.66
<40Ω
–
–
–
1.1" (28mm)
7.60 x 1.97 x 1.1"
2117.22
<40Ω
20Hz to
10kHz
10Hz to
10kHz
–
1.58" (40mm)
9.53 x 2.60 x 1.42"
2117.67
<40Ω
20Hz to
10kHz
10Hz to
10kHz

1.58" (40mm)
9.53 x 2.60 x 1.42"
2117.68
<40Ω
20Hz to
10kHz
10Hz to
10kHz

1.58" (40mm)
9.53 x 2.60 x 1.42"
2117.70
0 to 1kΩ
0 to
1kHz
0 to
1kHz

1.1" (28mm)
8.5 x 2.5 x 1.18"
2117.56
Buzzer
<100Ω ± 25Ω
50 to
500Hz
40 to
500Hz
–
0.60" (Ø 15mm)
7.95 x 2.76 x 1.33"
7000.02
502
503
511
512
514
565
CM605
670
<35Ω
1000Hz 10,000Hz

1.65" (42mm)
10.71 x 3.15 x
1.69"
2117.49
<35Ω
1000Hz 10,000Hz

1.58" (40mm)
10.12 x 3.15 x
1.69"
2117.50
Yes
(w/adjustable
threshold)
20kHz
20kHz

≤1.02" (26mm)
2.76 x 7.6 x 1.46"
2129.53
Yes
(w/adjustable
threshold)
20kHz
20kHz

≤1.02" (26mm)
2.76 x 7.6 x 1.46"
2129.54
Yes
(w/adjustable
threshold)
20kHz
20kHz

≤1.02" (26mm)
2.76 x 7.6 x 1.46"
2129.50
675
F05
F07
F09
Technical Assistance (800) 343-1391
www.aemc.com
21
ORDERING INFORMATION
DESCRIPTION
CATALOG NO.
Clamp-On Meter Model 500
(AC, 400Aac, 600Vac, Ohms, Continuity)................................................................................................................................................................................. Cat. #2117.54
Clamp-On Meter Model 502
(TRMS, 400Aac, 600Vac/dc, Ohms, Continuity)..................................................................................................................................................................... Cat. #2117.66
Clamp-On Meter Model 503
(AC/DC, 400Aac/dc, 600Vac/dc, Ohms, Continuity).............................................................................................................................................................. Cat. #2117.22
Clamp-On Meter Model 511
(AC, 1000Aac, 750Vac/1000Vdc, Ohms, Continuity, Hz).................................................................................................................................................... Cat. #2117.67
Clamp-On Meter Model 512
(TRMS, 1000Aac, 750Vac/1000Vdc, Ohms, Continuity, Hz).............................................................................................................................................. Cat. #2117.68
Clamp-On Meter Model 514
(AC/DC, TRMS, 1000Aac/dc, 750Vac/1000Vdc, Ohms, Continuity, Hz)........................................................................................................................ Cat. #2117.70
Leakage Current Meter Model 565
(TRMS, 10Aac, 100Aac, 600Vac/dc, Hz, Ohms, Contunuity)............................................................................................................................................. Cat. #2117.56
Clamp-On Meter Model CM605
(100Aac/dc, 600Vac/dc, Hz, Ohms, Contunuity)..................................................................................................................................................................... Cat. #7000.02
Clamp-On Meter Model 670
(Dual Display, TRMS, AC Amps, AC/DC Volt s, Ohms, Continuity, Frequency & Temperature)........................................................................... Cat. #2117.49
Clamp-On Meter Model 675
(Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature)................................................................................. Cat. #2117.50
Clamp-On Meter Model F05
(TRMS, 400Aac/dc, 600ac/dc, Hz, Power (kW), Phase Rotation, Ohms, Continuity).................................................................................................... Cat. #2129.53
Clamp-On Meter Model F07
(TRMS, 400Aac/dc, 600ac/dc, Hz, Ohms, Continuity, Temperature)................................................................................................................................. Cat. #2129.54
Clamp-On Meter Model F09
(TRMS, 400Aac/dc, 600ac/dc, Hz, Power (kW, kVA, kVAR), Phase Rotation, Ohms, Continuity)............................................................................ Cat. #2129.50
22
www.aemc.com
Technical Assistance (800) 343-1391
TRAINING SEMINARS
AEMC® offers one-day training seminars throughout the USA on Ground Resistance Testing,
Insulation Resistance Testing and Power Quality. Public and private c­ ourses are available.
For the schedule of upcoming training seminars contact [email protected], visit our website at
www.aemc.com or call (800) 343-1391.
Understanding Ground
Resistance Testing
For field engineers, technicians, utility engineers, supervisors,
electricians and inspectors who need or have an interest in testing and certifying electrical power grounding systems.
Key topics covered include:
• Soil Resistivity
• Ground Resistance
• 3-Point Measurements
• 4-Point Measurements
• Clamp-On Measurements
• Step and Touch Potential Measurements
Understanding Insulation
Resistance Testing (Future)
For field engineers, technicians, supervisors, electricians, plant
maintenance personnel and inspectors who need or have an
interest in insulation resistance testing on motors, cables and
transformers.
Key topics covered include:
• Motor Theory
• Spot Testing
• Timed Tests
• Polarization Index
• Dielectric Discharge Testing
• Temperature correction of test results
Understanding Power Quality (Future)
For field engineers, technicians, supervisors, electricians, plant
maintenance personnel and inspectors who need or have an
interest in monitoring, recording and analyzing
power quality.
Key topics covered include:
• Why power quality is important to you
• Symptoms and problems associated with poor power quality
• Types of disturbances and how to tell them apart
• Harmonic analysis - what, why and how to measure
• THD - what is it and how much is too much
• Power Factor - what is it, why know it and how to measure it
Technical Assistance (800) 343-1391
www.aemc.com
23
www.aemc.com
AEMC® Website
The AEMC® website offers a wide assortment of technical product information, software and firmware
updates, user manuals and printable data sheets for all AEMC® products. View AEMC® 's upcoming trade
shows and training seminars that take place across the country, read about AEMC® 's NEW products and
register purchased AEMC® products. Visit us at www.aemc.com
AEMC® Storefront
The AEMC® online store offers the opportunity to purchase replacement parts such as fuses, test leads and
other accessory items for your test instruments. The online store also offers refurbished and discontinued
items at a reduced price. Product specials are also offered. Visit the store at www.aemc.com/store
Technical Sales and Assistance
If you are experiencing any technical problems, or require any assistance with the proper use or application
of any AEMC® instrument, e-mail our technical hotline at [email protected]
Call the AEMC® Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: (800) 343-1391
Chauvin Arnoux®, Inc. d.b.a AEMC® Instruments • 200 Foxborough Blvd. • Foxborough, MA 02035 USA • (800) 343-1391 • (508) 698-2115 • Fax (508) 698-2118
Export Department: (978) 526-7667 • Fax (978) 526-7605 • E-mail: [email protected]
950.BR-CLAMPON_0211Rev01 Printed in the USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement