Red Sea ReefLED 160S User Manual

Below you will find brief information for ReefLED 50, 90, 160S. This manual provides essential information on Red Sea's ReefLED Wi-Fi lights, designed for optimal coral growth and color rendition. It covers safety precautions, the ReefBeat app operation, installation, connection, settings, additional effects like acclimation and lunar cycle, connectivity modes, maintenance, and troubleshooting. It guides users through all aspects of the lights, including a separate moonlight channel and the ReefBeat app for control.

PDF Download
Document
Red Sea ReefLED 50, 90, 160S User Manual + AI Chat & PDF Download | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • REEF-SPEC® Blue and White LEDs
  • Wi-Fi connectivity via ReefBeat app
  • Dedicated moonlight channel
  • Homogeneous light distribution
  • Acclimation and Lunar Cycle features
  • D-Programs for automated control
  • Offline and Direct Mode
  • Cloud activity simulation

Frequently asked questions

Select your preferred network and wait a few moments while the ReefLED connects. The indicator LED will now be a solid red. Follow the instructions on the app for initial settings.

The ReefLED will only work after it has been connected to the ReefBeat app.

Tap "Manual mode" from the 3-dot menu of the Dashboard.

With a permanent connection to the internet, your ReefLED will have full functionality and all ReefBeat cloud related services. In offline mode, your SMD will need to be connected to the same network as your Red Sea connected devices to communicate with them.

Permanently remove (Delete) the specific ReefLED from ReefBeat. Press the Settings button for about 15 seconds (until the indicator LED shows a double blink), and then disconnect and reconnect the power by the DC jack.
Preparing document for printing…
0%