advertisement
EN
USER
MANUAL
User manual for the Icona ViP manager Art. 20003310W
2
CONTENTS
MONITOR DESCRIPTION ...................................................4
FUNCTION KEYS ................................................................5
SOFT-TOUCH KEY ACTIVATION........................................5
SWITCHING OFF THE SCREEN .........................................5
ICONA MANAGER MENU ...................................................6
ALARM MENU STATUS ICONS .....................................................................6
FAVOURITES BAR, FAVOURITES PAGE AND ADVANCED INFO ................7
MOVING AND REMOVING FAVOURITES .....................................................8
ALARM .................................................................................9
ACTIVATING THE ANTI-INTRUSION SYSTEM ..............................................11
THE ANTI-INTRUSION SYSTEM ....................................................................12
PARTIAL AREA ACTIVATION ..........................................................................13
ALARM OPTIONS ...............................................................17
OTHER / LIGHTS / IRRIGATION / AUTOMATIONS ...........20
FUNCTION SCHEDULING ..................................................20
DOOR ENTRY MONITORS .................................................22
DOOR ENTRY MONITORS - Intercoms .........................................................22
DOOR ENTRY MONITORS - Cameras...........................................................22
DOOR ENTRY MONITORS - Open doors ......................................................22
DOOR ENTRY MONITORS - Messages .........................................................23
DOOR ENTRY MONITORS - Call divert .........................................................23
DOOR ENTRY MONITORS - Video memory ..................................................23
DOOR ENTRY MONITORS - Audio message.................................................24
DOOR ENTRY MONITORS - Multiple addresses ...........................................24
ADVANCED FUNCTION SCHEDULING .............................24
TIMED FUNCTIONS ............................................................24
DIMMER LIGHTS .................................................................25
DIMMER LIGHT SCHEDULING ......................................................................25
DIMMABLE LIGHTS WITH PRESENCE SENSOR .........................................26
RGB LIGHTS SCHEDULING ..........................................................................27
CLIMATE CONTROL ...........................................................28
LOADS .................................................................................30
CONSUMPTION ...................................................................30
CONSUMPTION/PRODUCTION COMPARISON ...........................................31
SCENARIOS ........................................................................32
DEACTIVATE A SCENARIO ............................................................................32
AUDIO BROADCAST ..........................................................33
AUDIO BROADCAST - Player screen .............................................................33
AUDIO BROADCAST - Playlist screen ...........................................................34
AUDIO BROADCAST - Library screen ............................................................34
AUDIO BROADCAST - Scenarios ...................................................................34
SETUP MENU DESCRIPTION ............................................35
General parameters-Lock keypad and touch screen.......................................35
General parameters-Set date and time ...........................................................36
General parameters-Volume control................................................................36
General parameters-Soft touch keys ...............................................................37
Creating a new scheduled scenario ................................................................45
Advanced scheduled scenario functions .........................................................45
Creating a new conditioned scenario ..............................................................46
Advanced conditioned scenario functions .......................................................46
SETUP - Configure event messages ...............................................................50
SETUP - Advanced .............................................................50
Import home automation scheduling ...............................................................52
Home automation - Reset configurations ........................................................53
Door entry monitors - Actuators directory ........................................................54
Door entry monitors - Cameras directory ........................................................55
Door entry monitors - Intercoms directory .......................................................56
Door entry monitors - Set tone repetition.........................................................57
Door entry monitors - Import audio message ..................................................58
Door entry monitors - Configure multiple addresses .......................................59
3
WARNING
• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed for.
• Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for any alterations made by others for any reason or for the use of non-original accessories or materials.
• All the products comply with the requirements of Directive 2006/95/EC (which replaced Directive 73/23/EEC and subsequent amendments) as certified by the CE mark they carry.
• Do not insert objects or pour liquids into the device.
• Do not route the riser wires in proximity to power supply cables (230/400V).
• Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance work.
• Clean using a damp cloth. Do not use alcohol or other aggressive products.
Fonts are © Bitstream (see below). DejaVu changes are in public domain.
Glyphs imported from Arev fonts are © Tavmjong Bah (see below)
Bitstream Vera Fonts Copyright
------------------------------
Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation files (the "Font Software"), to reproduce and distribute the Font
Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the
Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modified and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Bitstream" or the word "Vera".
This License becomes null and void to the extent applicable to Fonts or Font Software that has been modified and is distributed under the "Bitstream Vera" names.
The Font Software may be sold as part of a larger software package but no copy of one or more of the Font
Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO
EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE
USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact: [email protected]
Arev Fonts Copyright
------------------------------
Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation files (the "Font Software"), to reproduce and distribute the modifications to the Bitstream Vera Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modified and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Tavmjong Bah" or the word "Arev".
This License becomes null and void to the extent applicable to Fonts or Font Software that has been modified and is distributed under the "Tavmjong Bah Arev" names.
The Font Software may be sold as part of a larger software package but no copy of one or more of the Font
Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO
EVENT SHALL TAVMJONG BAH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING
ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE
THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the name of Tavmjong Bah shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from Tavmjong
Bah. For further information, contact: [email protected]
MONITOR DESCRIPTION
13
12
11 10 9 8 7 6 5
4
1
2
3
4
1. Microphone
2. 4.3" touch screen
3. RFID key sensor
4. Door lock key [programmable]
5. Privacy / Doctor key [programmable]
6. Self-ignition key [programmable]
7. Open doors key
8. Video memory key
9. Key "3" [programmable]
10. Key "2" [programmable]
11. Key "1" [programmable]
12. Audio key
13. Micro SD card
FUNCTION KEYS
Audio key: activates or deactivates conversation with the external unit.
Door lock key: opens the corresponding door lock.
[ programmable
] lock release
/ actuators
Programmable key 1:
[ programmable
] intercom
/ self
ignition
/ alarm
/ lock
release
/ actuators
/ scenarios default
= deactivated
Programmable key 2:
[ programmable
] intercom
/ self
ignition
/ alarm
/ lock
release
/ actuators
/ scenarios default
= deactivated
Programmable key 3:
[ programmable
] intercom
/ self
ignition
/ lock
release
/ call priority
1-4 / actuators
/ scenarios
SOFT-TOUCH KEY ACTIVATION
• See SETUP menu-General parameters-Soft touch keys
Swipe keys
• In ADDITION to the programmable functions for keys 1 - 2 - 3 it is possible to assign one SCENARIO that will be activated at the same time as the associated function is activated by pressing the corresponding key (1 - 2 - 3).
Video memory key:
PRESSED allows access to the messages section.
LIT STEADILY video memory or absent message active.
FLASHING new message waiting.
Open doors key:
LIT STEADILY signals the opening of one or more of the doors listed in the directory
PRESSED allows access to the open doors section.
Self ignition key: switches on the monitor and displays video from an external unit.
[ programmable
] intercom
/ self
ignition
/ lock
release
/ actuators
/ scenarios
Privacy / Doctor function key[ programmable
]
• The PRIVACY function disables calls from the external unit and from the switchboard.
• The DOCTOR function enables automatic activation of the lock-release in response to a call from the external unit.
• The PRIVACY + DOCTOR function, in addition to disabling the door-entry phone ringtone in the same way as the Privacy function, also enables automatic activation of the lock-release in response to a call from the external unit.
SWITCHING OFF THE SCREEN
√ The screen on the device is switched on.
Use the zoom out gesture to switch off the screen.
• If the device is displaying a screen where the gesture is associated with a specific function, the screen switch-off function will be automatically disabled.
5
ICONA MANAGER MENU
The icons in the Icona Manger menu vary according to the type of system installed and the functions available.
To navigate the menu, simply use your finger to touch the icon corresponding to the desired function.
Touch the display to access the main menu.
Press the icon to immediately return to the main menu.
Press the icon to return to the previous screen.
Alarms
Other
Irrigation
Video System
Blinds
Automations
Climate
Lights
5
30
Loads
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
ALARM MENU STATUS ICONS
The “Alarm” icons in the home page provide information on the status of the alarm system.
Alarms
Alarm deactivated across the entire system
Alarms
Alarm activated across the entire system
Alarms
Alarm partially activated: only some of the areas and/or partial sets are activated
Alarms Alarms
Alarms
Sabotage/anomaly Alarm memory In alarm
Navigate through the available screens by swiping with your finger to the left or right
STATUS ICONS MENU
The icons in the home screen provide feedback about the status of the active elements within the respective sections.
NO ACTIVE ELEMENTS AT LEAST 1 ACTIVE ELEMENT
Alarms
Other
Irrigation
Video System
Blinds
Automations
Climate
Lights
5
30
Loads
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
Climate
Other
Climate
Other
Blinds Blinds
Lights
Irrigation
Automations
Audio broadcast
Consumptions
Setup
Scenarios Audio broadcast
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
Lights
Irrigation
Automations
Audio broadcast
6
FAVOURITES BAR, FAVOURITES PAGE AND
ADVANCED INFO
Hold pressed one of the icons in the main menu to open the corresponding favourites bar / favourites page / advanced info panel.
Scenario 1
Scenario 2
Full set
Full unset
5|30
Alarms
Other
Video System
Blinds
Climate
Lights
5
30
Loads
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
5|30
System off
17:43
Irrigation Automations
Scenario 1
Scenario 2
Full set
Full unset
System off
17:43
Allarme
Altro
Irrigazione
Favourites bar
Videofonia
Favourites page
Carichi
Clima
Luci
0
30
Consumi
Allarme
0
0
Termostato
20,0°
17:36
02/10/14
NIGHT bedroom bathroom bedroom 2 disco
5|30
LIGHTS
0|4
0|4
0|4
0|3
OFF
OFF
OFF
OFF
ON
ON
ON
ON
FAVOURITES
Select the Favourites bar to create a link to the selected function in the favourites bar.
» The link allows you to display the corresponding page simply by pressing the icon in the top bar from any screen page.
• You can create a link to a function or to a room.
• CAUTION! You cannot create a link to a single element!
• Maximum number of links in the favourites bar = 4
Select the Favourites page icon to create a link to the selected function in the favourites page.
» The link allows you to display the relative page simply by pressing the icon in the favourites page.
» Maximum number of links in Favourites page = 18
If there are more than 9 links, they will be displayed over 2 screens.
Navigate through the available screens by swiping with your finger to the left or right
Alarm
Other
Irrigation
Do you want to add the element
Videofonia
Lights
Clima
0
30
NO
Luci
Loads Consumptions
Allarme
0
0
Thermo
20,0°
17:36
02/10/14
7
8
Lights
5
30
2
4
Room 1
Scenarios
Setup
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
ADVANCED INFO
When a function is activated, the advanced info relative to that function is displayed.
» The fraction displayed indicates how many elements relative to the function are available and how many are active.
MOVING AND REMOVING FAVOURITES
Hold pressed the icon of the desired favourite (either in the favourites bar or in the favourites page) to open the relative menu.
• Favourites bar (max. 4 icons)
Lights
Lights
5
30
» No info displayed.
» Info displayed:
30 elements available - 5 elements active
Lights
30
30
» Info displayed:
30 elements available - 30 elements active
1 2 3 4
• The function can be activated on:
ALARMS / CLIMATE / OTHER / BLINDS / LIGHTS / IRRIGATION /
AUTOMATIONS / LOADS / AUDIO BROADCAST.
5|30
Scenario 1
Scenario 2
Full set
Full unset
WIDGET BAR
» The Home page has a customisable "widget" side bar with various functions:
System off
• Favourites page (max. 18 icons)
17:43
Alarms
Other
Video System
Blinds
Climate
Lights
5
30
Alarms
2
6
Thermo
20,0°
17:36
02/10/14
1
4
7
2
5
8
3
6
9...
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
Press the Move icon to rearrange the positions of the various favourites in the favourites bar.
Irrigation Automations Loads
• ALARM - the widget shows the alarm status of the system
(with or without advanced info)
• METER - you can associate a widget with one of the meters in the home automation system. The widget shows the instantaneous reading of that specific meter.
• CLIMATE - the widget displays the temperature of the selected climate zone and the status of the climate control system (off - heating - cooling)
• AUDIO BROADCAST - the widget displays a single player and information (title and subtitle) about the track currently playing; play/pause button; player status button (also the player connection)
• DATE AND TIME
• Only the AUDIO BROADCAST widget is interactive
• All the other widgets do NOT respond when clicked on!
» You can choose one of the 4 possible positions (0 - 1 -
2- 3) in the favourites bar; confirm the selection.
» You can choose one of the 18 possible positions (0 >
17) in the favourites page; confirm the selection.
Press the Remove icon to delete the selected icon from the favourites; confirm your selection.
ALARM
Press the icon to access the alarms menu.
Alarms
ALARM STATUS
√ An alarm is tripped.
Scenario 1
Scenario 2
Full set
Full unset
7
System off
6 5
17:43
1
2
3
4
9
8
7
ALARM LOG
02/10/2014 17:49:41
Alarm
Theft
Expansion 1 |1
Aree
2
6 5 4
Disins.
1. Settings menu icon
2. View camera icon
3. Customisable icons (x2) - Shortcut commands
4. Clock
5. Area status
6. System status
7. Customisable icons (x4) - Activation command
• A flashing icon signals the presence of anomalies. Press the icon to view the details!
1. Events scrolling icons
2. Date and time of selected event
3. Event details
4. Switch off system icon
5. Reset alarms icon
6. Reset phone calls icon
7. Stop alarms icon
8. View camera icon
9. View camera snapshots icon
5|30
Scenario 1 AREA 4
Scenario 2
Full set
Full unset
AREA 3
System off
AREA 1
AREA 2
17:43
1
2
3
Press the VIEW CAMERA icon to view in real time images from the camera connected to the alarm zone.
Press the VIEW SNAPSHOTS icon to view snapshots taken by the camera connected to the alarm zone at the moment the alarm was tripped.
• Each segment represents one are of the alarm system.
• The colour of the segments gives an immediate indication of the status of each individual area!
• AREA 1 > Area activated
• AREA 2 > Area partially activated
• AREA 3 > Area in alarm
• AREA 4 > Area deactivated
Unset
Press the DEACTIVATE ALARMS button to deactivate the alarm system.
Press the RESET ALARMS to reset the alarms log.
ALARM SYSTEM STATUS ICONS - 6 -
Press the RESET PHONES icon to delete the emergency phone calls log.
System off
Alarm deactivated
Insert total
Alarm activated across the entire system
Insert partial
Alarm partially activated
Press the STOP ALARMS icon to stop the selected alarm (the system remains activated).
Alarm log
Alarm in progress In Tamper
9
The ALARMS MENU keeps track of the alarm in progress.
RESET ALARMS
The alarm system can be reset in any of the following 3 ways:
Scenario 1
Scenario 2
Full set
Full unset
Alarm in progress
17:43
Press the icon to open the event details window.
1. From the main screen of the alarms menu, press the
RESET ALARMS icon
2. If the icon is not present, access the Alarms menu and press the icon to access the alarm settings.
Access the SHORTCUTS function by pressing the corresponding icon.
Press the RESET ALARMS icon to reset the alarm system.
3. Perform an ACTIVATION (even partial) of the areas in alarm.
• The system does not provide any messages to inform you that the operation was completed successfully!
ALARM LOG
02/10/2014 17:49:41
Allarms
Theft
Exp.1 |1
Aree
2
ID: 19
ALARM
Reset alarms
Reset phone calls
Request assistance
Enable installer
√ The icon indicates that the system is loading the captured images.
Press the icon to view the images captured by the camera in the area in alarm (optional function).
• There must be at least one camera connected to the system.
• This function can be configured and activated from Safe
Manager.
• you must wait until the images captured at the moment the alarm was tripped have finished loading before you can view them.
Press the icon to start live streaming from the camera.
10
ACTIVATING THE ANTI-INTRUSION SYSTEM
# OPTION A
Press the icon in the main ALARM screen
# OPTION B
This takes you to the Alarms menu, and then press the icon to access the options menu.
Press the CUSTOMISED ACTIVATION icon.
• CAUTION!
The icon varies according to the status of the alarm system!
Scenario 1
Scenario 2
Full set
Full unset
System off
17:43
ALARM
Cameras
Customised activation
Activation control
Event log
Area 1
Area 3
ALARM
Area 2
Area 1
Area 3
ALARM
Area 2
Select the desired area.
Press the total activation icon.
» The activated area is highlighted in green; the type of activation performed is also indicated.
11
DEACTIVATING
THE ANTI-INTRUSION SYSTEM
# OPTION A
Press the icon in the main ALARM screen
• CAUTION!
The icon varies according to the status of the alarm system!
# OPTION B
Access the Alarms menu and then press the icon to access the options menu.
Press the CUSTOMISED ACTIVATION icon.
Scenario 1
Scenario 2
Full set
Full unset
Insert partial
17:43
ALARM
Cameras
Customised activation
Activation control
Event log
Area 1
Area 3
Full set
ALARM
Area 2
Area 4
Select the desired area.
12
Area 1
Area 3
Full set
ALARM
Area 2
Press the total deactivation icon.
PARTIAL AREA ACTIVATION
Press the partial activation icon.
ALARM SETTINGS
Access the Alarms menu and then press the icon to access the options menu.
Navigate through the available alarm areas by swiping with your finger to the left or right
Area 3
P1
P2
P1+P2
Area 3
Area 4
IMM
Area 4
RIT
IMM
IMM
RIT
RIT
ALARM
Cameras
Customised activation
Activation control
Event log
Select the desired function by pressing the corresponding option.
• Each time an ALARM function parameter is modified, it will be relayed to the control panel. In this case the configuration update screen will be displayed.
Select the desired area for partial activation and the activation type.
• IMM = immediate
• RIT = delayed
» The activated area is highlighted in green; the type of activation performed is also indicated.
Cameras
ALARM SETTINGS - Cameras
Press the icon of the desired camera to start playback.
ALARM
Camera 1
Camera 2
Camera 3
Area 1
Area 3
Full set
ALARM
Area 2
Area 4
SELF-IGNITION
Camera 1: In communication
Swipe with your finger to the left or right to switch between the available cameras.
Press the OFF icon to stop playback and return to the previous screen.
13
Customised activation
ALARM SETTINGS -
Customised activation
The function allows you to display the areas of the system, the status of each area and to activate/deactivate the alarm system in the chosen areas.
Event log
ALARM SETTINGS - Event log
LOG
Area 1
Area 3
ALARM
Area 2
Event log
Alarm log
Select the desired category by pressing the corresponding name.
» See "ACTIVATING THE ANTI-INTRUSION SYSTEM" on page 11
Activation control
ALARM SETTINGS - Activation control
The function allows you to launch previously created activation scenarios.
3
2
EVENT LOG
13/11/2014 15:14:08
Set
General
User logged
Aree ID:00
Aree
1 2 3 4
1
2
ALARM
Scenario P1
Scenario P2
Scenario P1+P2
Scenario 4
[A]
[B]
1. Selected event/alarm (date + time)
2. Event/alarm navigation icons
3. Event/alarm details
» Information about the selected event is displayed on the screen.
Press icon [A] with the activation name to launch the corresponding scenario.
You can add links to the activation controls in the alarm home page.
Press icon [B] to add the activation control to the home page of the alarm function.
» The icon is labelled.
14
• You can insert a maximum of 4 different activation controls in the alarm home page!
Zone and area status
ALARM SETTINGS - Zone and area status
The function is used to check the status of the various zones/areas of the system configuration.
Shortcuts
ALARM SETTINGS - Shortcuts
This function can be used to select which shortcut buttons (alarm command) to move to the alarm home page, or to execute a command
(or trigger an alarm) from those listed.
ALARM
ALARM
Omitted
Isolated
Open
Tampered/Faulty
Theft
H24
Fire
Panic
24
ALARM
Press the icon to open the list of Excluded / Isolated / Open /
Sabotaged - Faulty zones.
√ If there are no zones that meet the criteria.
ALARM
Escluse
Isolate
Aperte
Tampered/Faulty
No zone to indicate
√ If there are zones that meet the criteria.
Robbery
Flooding
Gas
Medical
Event1
Event2
Non-routine
Stop alarms
ALARM
1
2
Area 1
Exp. 1 I1
Area 2 Area 3
Reset alarms
Reset phone calls
ALARM
Request assistance
Enable installer
Swipe with your finger to the left or right to move between the available areas.
Press the icon to add the SHORTCUT to the home page of the alarm function.
» The icon is labelled.
• You can insert a MAXIMUM OF 2 SHORTCUTS in the alarm home page!
15
Exit controls
ALARM SETTINGS - Exit controls
This function enables you to change the status of the system outputs.
Phone book
ALARM SETTINGS - Phone book
This function allows you to edit the phone book memorised on the control panel.
Exit 1
Exit 2
Exit 3
Exit 4
ALARM
TELEPHONE
TELEPHONE
TELEPHONE
Telephone 1
Telephone
0123456789 [email protected]
Telephone 2
ABC
ABC
ABC
Swipe your finger up or down to view all the available menu options.
Swipe with your finger to the left or right to move between the phone book entries.
Press the icon to add the SHORTCUT to the home page of the alarm function.
Press the icon to edit the value of the corresponding entry.
» The icon is labelled.
Press the icon of the desired output to edit its status.
Exit 1
Exit 2
Exit 3
Exit 4
ALARM
Set
Unset
Toggle q
Aa
123 a w s z e x d r
Telephone 1 t y u f c g v h b j n i k m o l p
Select the desired status.
• SET: to activate the output
• UNSET: to deactivate the output
• TOGGLE: to change the status (if the output is activated, it will be deactivated and vice-versa)
» The system confirms the changes made.
1
4
7
0123456789
2
5
8
0
3
6
9
16
ALARM OPTIONS
The OPTIONS panel contains a series of submenus dedicated to the various settings of the alarm system.
OPTIONS - Voice menu
SETUP-Anti-intrusion-Voice menu
This function - if activated - allows you to partially control and to monitor the control panel via a phone call.
ALARM SETUP √ In order to use this function, it is first necessary to install a VOICE MESSAGE MODULE Art. 30001303.
Change PIN
Voice menu
Installer
Timer
ALARM SETUP
Swipe your finger up or down to view all the available menu options.
Press the desired option to open the corresponding panel.
Change PIN
Voice menu
Installer
Timer
OPTIONS - Change PIN
SETUP-Anti-intrusion-Change pin
The CHANGE PIN panel allows you to edit or delete the pin codes associated with the various users.
» Indicates the function is ACTIVE
ALARM SETUP
User 1
User 2
User 3
User 4
» Indicates the function as INACTIVE
» The system CONFIRMS and UPDATES the settings.
OPTIONS - Installer menu
SETUP-Anti-intrusion-Installer menu
The options enables/disables installer mode in the system parameters of the control panel.
Select the desired user to edit the PIN.
Select the icon to activate a new user.
ENTER NEW
PIN
REPEAT NEW
PIN
ADVANCED SETUP
1
4
7 8
0
2
5
Enter the PIN 2 times, then confirm.
» The system is updated.
3
6
9
» The system CONFIRMS and UPDATES the settings.
17
OPTIONS - Auto-activation
SETUP-Anti-intrusion-Auto-activation
ADVANCED FUNCTION - requires login as INSTALLER/
MANUFACTURER!
This option allows you to enable/disable auto activations created using the ACTIVATIONS option of the SAFE MANAGER program.
OPTIONS - Organize dektop
SETUP-Anti-intrusion-Organize desktop
This option allows you to delete the links to Activation controls /
Shortcuts / Output controls previously added to the alarms home page.
Scenario P1
Full set
Auto-activation 1
ALARM SETUP
Auto-activation 2
Auto-activation 3
Auto-activation 4
Full unset
Set total
Press the icon to delete the corresponding link.
» Indicates the function is ACTIVE
» Indicates the function is INACTIVE
ScenarioP1
Ins. Totale
Dis. Totale
REMOVE ICON
FROM DESKTOP?
YES NO
» The system CONFIRMS and UPDATES the settings.
OPTIONS - Timer
SETUP-Anti-intrusion-Timer
This option allows you to enable/disable the alarm system activation timer.
Inserito totale
» The system CONFIRMS and UPDATES the settings.
Press the icon to insert the link to the function TIMED
ACTIVATIONS.
Press the icon to insert the link to the function VIEW
CAMERAS.
ALARM SETUP
Timer 1
Timer 2
Timer 3
Timer 4
OPTIONS - Tones
SETUP-Anti-intrusion-Tones
ADVANCED FUNCTION - requires login as INSTALLER/
MANUFACTURER!
The function allows you to manage (by activating or deactivating) the alert sounds of the control panel.
Select the desired user to edit the PIN.
Select the icon to activate a new user.
» The system CONFIRMS and UPDATES the settings.
√ The timers are programmed using the TIMING/
ACTIVATIONS function of the SAFE MANAGER program.
Timer
Set up desktop
Tones
Configuration
ALARM SETUP
18
Press the icon corresponding to the TONES function to activate/ deactivate system sounds.
OPTIONS - Configuration
SETUP-Anti-intrusion-Configuration
» Indicates the function is ACTIVE
ADVANCED FUNCTION - requires login as INSTALLER/
MANUFACTURER!
» Indicates the function is INACTIVE
» The system CONFIRMS and UPDATES the settings.
Timer
Set up desktop
Tones
Configuration
ALARM SETUP
ALARM SETUP
RS485 bus address
RS485 bus speed
Device password
User code
Select the desired option.
Configuration - RS485 bus address
SETUP-Anti-intrusion-Configuration-RS485 bus address
Press the TONES icon to enter the sub-menu.
In the sub-menu you can select which sounds you want the control panel to play.
Input
Output
Alarm
Chime
ALARM SETUP
1
4
7
5
8
1
2
0
3
6
9
Enter the desired address and confirm by pressing the icon.
Configuration - User code
SETUP-Anti-intrusion-Configuration- User code
Swipe your finger up or down to view all the available menu options.
Select or de-select the desired options.
1
4
7
******
2
5
8
0
3
6
9
» Indicates the function is ACTIVE
Enter the desired code, then confirm.
» Indicates the function is INACTIVE
• It is not advisable to change the BUS ADDRESS and USER
CODE parameters as this could cause a malfunction of the alarm system. CONTACT QUALIFIED PERSONNEL!
19
OTHER / LIGHTS / IRRIGATION /
AUTOMATIONS
Alarms
Other
Irrigation
Other
Video System
Blinds
Blinds
Automations
Lights
Climate
Lights
5
30
Loads
Alarms
0
0
Thermo
20,0°
17:36
02/10/14
Irrigation
Press to access the relative sections.
1
2 room 1 light 1 light 2 light 3 light 4 room
2
25
T
OFF
OFF
OFF
OFF room 3
ON
ON
ON
ON
Automations
1. Selected room
2. Devices in the selected room
Swipe with your finger to the left or right to move between the available rooms.
Swipe your finger up or down to view all the available menu options for the selected room.
Activate/deactivate the selected device by pressing the ON/OFF buttons
FUNCTION SCHEDULING
8 room 1 room 2 room 3 room 4
7
LIGHTS
0|4
3|4
4|4
3|4
6 5 4 3 2
OFF
OFF
OFF
OFF
ON
ON
ON
ON
1 room 1 room 2 room 3 room 4
LIGHTS
0|4
3|4
4|4
3|4
OFF
OFF
OFF
OFF
ON
ON
ON
ON
1. ON/OFF icons
2. Status indicator
3. Advanced info indicator
4. All the room devices are ACTIVE
5. Some of the room devices are ACTIVE
6. All the room devices are INACTIVE
7. List of available rooms
8. Selected function
• The indicator turns blue if AT LEAST 1 DEVICE IS
ACTIVE/ON.
Long press the desired ROOM or DEVICE to open the advanced panel, then select the option SCHEDULING to open the corresponding panel.
Videofonia
Scheduling
Activate/deactivate the selected room by pressing the ON/OFF buttons ambiente 1 ambiente 2 ambiente 3 ambiente 4 Carichi
0|4
Clima
3|4
OFF
0
30
OFF
Luci
4|4
OFF
3|4
Consumi
OFF
ON
ON
ON
ON
20
5
4
3
Mon Tue Wed Thu
TIME
05:00
Fri Sat
STATE
ON
PROG
09:00 OFF
Sun
ON
1
2
Mon Tue Wed Thu
TIME
05:00
Fri Sat
STATE
ON
PROG
09:00 OFF
Sun
ON
1. Days of the week bar
2. Time/Status table
3. Programming On/Off icon
4. Copy program icon
5. Programming mode icon
PROG
Press the programming icon to enter PROGRAMMING
MODE
Once you have returned to the main page, you can copy the programmed activity from one day to another:
Select the day of the week to copied in the band at the top.
» The source day is highlighted in blue.
Press the icon to copy the programme, then select the destination days to which the programme is to be copied.
» The selected destination days are highlighted in red.
Press to confirm.
Mon Tue Wed Thu
FROM
24:00
00:00
07:00
15:00
Fri
TO
07:00
15:00
24:00
Sat
°T
17,5
21,0
19,0
Sun
Mon Tue Wed Thu
TIME
Fri Sat
STATE
05:00 ON
09:00 OFF
Sun
You can select the day/s to be modified by pressing the corresponding icon on the top bar.
» The selected day/s will be highlighted in red.
Press to add a programme to the list
Set the desired time/status.
Press to confirm.
» The value being modified is highlighted in yellow.
Press to DELETE a programme.
Press the icon to return to the previous screen.
21
DOOR ENTRY MONITORS
Video System
Press the icon to access the door entry monitors menu.
DOOR ENTRY MONITORS - Open doors
DOOR ENTRY MONITORS-Open doors
(open/closed).
Doors open
Press the icon to access the function, then select from the directory the door to be interrogated in order to start viewing the cameras associated with the door.
Intercoms
Ans. serv. setup
Video memory
Cameras
Messages
Doors open
Call divert
Audio message
Multiple addresses
Alarm
2
6
Anti-intrusion
20,0°
17:36
02/10/14
Doors open
» The icon changes to indicate that the door is open.
DOOR ENTRY MONITORS - Answering service setup
DOOR ENTRY MONITORS-
Answering service setup
This function allows you to manage the parameters for the device's video memory function
Actuators
• If enabled (via ViP Manager), the ACTUATORS
DIRECTORY will be displayed with the actuators icon.
Ans. serv. setup
Press the icon to access the dedicated submenu.
DOOR ENTRY MONITORS - Intercoms
DOOR ENTRY MONITORS-
Intercoms
Intercoms
Press the icon to access the function, then select from the directory the device to which the call is to be diverted via intercom call.
VIDEO SYSTEM
Video memory
Audio message
Record Message
Listen Recorded Message
INTERCOMS
123
Tick the VIDEO MEMORY box to activate the corresponding function.
Carlo
Jack
Paola
Video memory
» The icon changes status.
» The icon on the soft touch key lights up.
Press the icon to enter the ViP address to call.
Tick the AUDIO MESSAGE box to activate the voice message automatic playback function.
DOOR ENTRY MONITORS - Cameras
DOOR ENTRY MONITORS-
Cameras
This function allows you to interrogate a directory of cameras (see
"Door entry monitors - Cameras directory" on page 55) to start live
streaming.
22
Cameras
Press the icon to access the function, then select from the directory the camera to be interrogated.
Short press RECORD MESSAGE to start recording the AUDIO
MESSAGE.
Short press LISTEN RECORDED MESSAGE to play the recorded
AUDIO MESSAGE.
Audio message
» The icon changes status.
» The icon on the soft touch key lights up.
DOOR ENTRY MONITORS - Messages
DOOR ENTRY MONITORS-Messages
This function allows you to manage the ViP messaging system of the device.
Message
Press the icon to access the dedicated submenu.
Press the icon VIDEO MESSAGES to access the video memory sub-menu.
VIDEO MEMORY
[1]
01/01/2015 17:30
[2]
01/01/2015 17:45
[3]
01/01/2015 20:45
Common messages
MESSAGES
Video messages
1 1 2
Press the icon COMMON MESSAGES to access the ViP message sub-menu.
1. Previously viewed video recording
2. New video recording resolution
• [1] [2] [3] are previews of the video recordings recorded in the video memory.
• Each video is labelled with the date and time it was recorded.
Short press on the recording preview to start playback.
Long press (and confirm) to delete the video recording.
MESSAGES
12345678 message #1
12345678 message #2
26 Feb 10:45
26 Feb 12:37
DOOR ENTRY MONITORS - Call divert
DOOR ENTRY MONITORS-
Call divert
This function allows you to enable call diversion to another ViP device
(see "Door entry monitors - Call divert" on page 57) if there is no
response from the original device or if it is in use.
1 2 3 4 5
1. Delete message icon
2. Sender ViP address
3. Message title
4. New message / previously read message icon
5. Date message received
Short press on the message title to open the message.
Call divert
Press the icon to activate the function.
» The icon changes status (call divert activated).
Call divert
12345678 Message #1 26 Feb 10:45
Id mi, quam ea suntis reri volorec earciaes volorum fugiti dolum quidustet est que maios dollabo. Luptae doluptaque il explitibusam ni im quodis aligentia et doluptatio volor repel illatio blaceatqui sus, autent prerunt, sus nonsequo omnihic ienihit odis atectiu ntorrum quis modi ne periant.
Ossi nat. Orrovid quid millorro dis modias aut autae re entur? Culpa dolumquos alignam nobis minum laborepudis magname niminum nia doluptum faceatatem de voloritatur sus aliqui nemolorum, qui ute volumet volupta corepudae aliquat ecusciunt.
Evel il imil eiciis et aboreru ptatur sitiuntium vellupt atiuntur?
Es dit quodio. Itatem ni quos numet eiumqua tecepe volupienis volo omnis mi, sero esci bea sum net voluptur magnient occupta nem essimpo rporecu ptataspedita nobitium fuga. Et re, te dolor ab is venimin enimus expedi dunderunt maximagnim ventionsed ut as doluptur aut molut hit, sendita tatiusdaere int dollenihil ex enet veratur?
DOOR ENTRY MONITORS - Video memory
DOOR ENTRY MONITORS-Video memory
This function allows you to enable the video memory on the device.
(See "DOOR ENTRY MONITORS - Answering service setup" on page
Video memory
Press the icon to activate the function.
Video memory
» The icon will change status (video memory activated).
23
DOOR ENTRY MONITORS - Audio message
DOOR ENTRY MONITORS-
Audio message
The function allows you to enable audio message playback on the device on receipt of an incoming call.
(See "DOOR ENTRY MONITORS - Answering service setup" on page 22).
ADVANCED FUNCTION SCHEDULING
SCHEDULING ICONS
Audio message
Press the icon to activate the function.
Audio message
» The icon changes status (audio message activated).
scheduling
NOT PRESENT saved schedule NOT
ACTIVE saved schedule active
Some icons allow you to identify the presence of a schedule associated with a specific functions.
DOOR ENTRY MONITORS - Multiple addresses
DOOR ENTRY MONITORS-
Multiple addresses
The function allows you to configure the device to manage multiple addresses, thereby permitting the reception of calls directed to other
ViP devices.
(See "Door entry monitors - Configure multiple addresses" on page 59).
Multiple addresses
Press the icon to access the dedicated submenu.
TIMED FUNCTIONS
Some functions can be timed, i.e. an activation time for the function can be set.
T
T
T
TIMED FUNCTIONS other timed function timed light timed irrigation
Press the required icon to access the timer menu.
VIDEO SYSTEM
2
3
LIGHT 2
4
3
11:00
1
2
Tick the desired device to activate the function in combination with its previously configured address.
(See “Door entry monitors - Configure multiple addresses” on page 59).
Multiple addresses
If at least one multiple address is activated, the icon will change status.
1. Cursor for timer setting
2. Icons for precision timer setting
3. Timer setting indicator
4. Confirm icon
Press and drag the cursor to set the timer.
• YOU can also press and hold on a point of the arc to move the cursor to the required point.
You can set the timer with precision by pressing the buttons.
Confirm.
24
DIMMER LIGHTS
DIMMABLE LIGHTS
LIGHT 2
3 room 1 light 1 light 2 light 3 light 4
1. ON/OFF icons
2. Dimmable light icons
3. List of available lights
DIMMABLE LIGHT ICONS - KEY room
2
25
25
2
OFF
65%
OFF
OFF
OFF
OFF room 3
ON
ON
ON
ON
1
Press the cursor and drag it to set the desired timer value.
• YOU can also press and hold on a point of the arc to move the cursor to the required point.
You can set the timer with precision by pressing the buttons.
Confirm.
DIMMER LIGHT SCHEDULING
Hold pressed the desired ROOM or DEVICE to open the advanced panel, then select the option SCHEDULING to open the corresponding panel.
Minimum brightness
1
Maximum brightness
100
25
Programmed scheduling is deactivated
Programmed scheduling is activated
Mon Tue Wed Thu
TIME
05:00
Fri
PROG
09:00
Sat
STATE
ON
OFF
%
35%
35%
Sun
ON
Output inactive
Output active
25
1 2 3
ON
OFF
Press the ON/OFF icon (SHORT PRESS) to switch the corresponding output on or off.
ON
OFF
Press the ON/OFF icon (LONG PRESS) to increase or reduce the brightness.
1. Time column
2. Status column (ON/OFF)
3. Brightness setting column
Set the times and status as described in the paragraph
"FUNCTION SCHEDULING" on page 20
Set the brightness desired in the same way.
Press the dimmable light icon to access the advanced brightness control screen.
25
DIMMABLE LIGHTS WITH PRESENCE
SENSOR
DIMMABLE LIGHTS WITH PRESENCE SENSOR
• With PRESENCE SENSOR ACTIVATED
• You cannot control the function with short presses of the ON/OFF icon.
room 2 dimmer/presence detection room 3
25
OFF room 4
ON
ON
OFF
Press the ON/OFF icon (LONG PRESS) to increase or reduce the brightness. ONLY WITH THE OUTPUT
ACTIVE!
25
Press the dimmable light icon to access the advanced brightness control screen.
1 2
Hold pressed the desired ROOM or DEVICE to open the advanced panel, then select the option SCHEDULING to open the corresponding panel.
1. Dimmable lights with presence sensor icon
2. ON/OFF icons
DIMMABLE LIGHTS WITH PRESENCE SENSOR ICON - KEY
Presence sensor deactivated
Presence sensor activated
Minimum brightness
1
Maximum brightness
100
25
Programmed scheduling is deactivated
Programmed scheduling is activated
Mon Tue Wed Thu
TIME
05:00
Fri
PROG
09:00
ON
Sat
STATE
ON
OFF
%
35%
35%
Sun
1 2 3
Output inactive
Output active
1. Time column
2. Status column (ON/OFF)
3. Brightness setting column
Press the ON/OFF icon (SHORT PRESS) to switch the
Set the times and status as described in the paragraph
"FUNCTION SCHEDULING" on page 20
Set the brightness desired in the same way.
Press the ON/OFF icon (LONG PRESS) to increase or
Press the dimmable light icon to access the advanced
26
RGB DIMMABLE LIGHTS
DIMMABLE COLOUR CHANGING LIGHTS
RGB LIGHTS SCHEDULING
Hold pressed the desired ROOM or DEVICE to open the advanced panel, then select the option SCHEDULING to open the corresponding panel.
RGB light
3
2
1
Mon Tue Wed Thu
TIME
09:00
Fri
PROG
09:45
Sat
%
35%
Sun
100%
1. Brightness control cursor
2. Selected colour indicator
3. Chromatic spectrum
ON
Press and hold the cursor to move it along the bar and adjust the brightness.
1 2 3
Select the desired colour by pressing the corresponding area of the chromatic spectrum.
1. Time column
2. Colour column
3. Brightness setting column
Set the times and status as described in the paragraph
"FUNCTION SCHEDULING" on page 20
Set the desired colour and brightness in the same way.
RGB light
255
0
109
Press the selected colour indicator to open the advanced colour setting screen.
The screen shows the RGB composition of the selected colour
27
CLIMATE CONTROL
From the climate section you can monitor, set and program room temperatures.
ON
OFF
Press the ON/OFF icon to switch the climate zone on or off.
Press one of the icons to select the desired operating mode:
Press the icon to access the climate menu.
Climate
A
AUTOMATIC mode
Climate
M
MANUAL mode room 1 room 2 room 3 room 4
22,0°C
M
18,0°C
20,0°C
A
27,0°C
24,0°C 22,0°C
22,0°C
M
18,0°C
MANUAL FORCING mode
Press the icons to set the desired temperature; alternatively use the cursor, holding it pressed and dragging it.
1 2 3 4 5
Press one of the icons to select the desired seasonal operating mode:
1. List of rooms for climate control
2. Heating/cooling icons
3. Temperature setting
4. Automatic, Manual and Forcing mode icons
5. Temperature reading
Swipe your finger up or down to view the available options.
Select the desired room by pressing the corresponding icon.
SUMMER mode (cooling) room 1
12
20,0 °
11 10
21,0 °
9 8 7 6 room 2
A
M
4
5
1
2
3
21,0 °
WINTER mode (heating)
1. List of rooms for climate control
2. AUTOMATIC mode
3. MANUAL mode
4. MANUAL FORCING mode
5. Programming mode icon
6. Icons for precision setting
7. Rapid heat control cursor
8. Heating/cooling active icon
9. Temperature setting
10. On/Off icon
11. Winter/Summer operating mode icon
12. Temperature reading
Swipe with your finger to the left or right to view the available climate zones.
28
21,0 °
CLIMATE FORCING
It is possible to force programming (both automatic and manual) for a set period of time (hours or days).
Press the icon to access the climate forcing function.
• Daily climate control programming must apply to the whole 24hour cycle; any hours not programmed by the user will be set by the system automatically.
Mon Tue Wed Thu
FROM
24:00
00:00
07:00
15:00
Fri Sat Sun
TO °T
07:00 17,5
15:00 21,0
24:00 19,0 current
20,0 °
HOURS DAYS new
20:00°
00:00
2
3
4
START
Set the temperature and the duration of operation in forcing mode.
START
Press the icon to start operation in forcing mode.
» The icon is replaced by the RESET icon
RESET
Press the icon to suspend/resume operation in forcing mode.
Select the day and the value to be changed.
» The selected day will be highlighted in red.
» The selected times and temperatures will be highlighted in yellow.
Press the icons to set the start and end times of the time period and the desired temperature.
Press the icon to confirm the set/modified value.
Press the icon [3] to copy the programme, then select
• Once the forcing cycle has finished the system will revert to the mode set previously (Automatic or Manual).
CLIMATE SCHEDULING
Press to confirm.
1
Mon Tue Wed Thu
PROG
FROM
00:00
07:00
15:00
Fri
TO
07:00
15:00
24:00
Sat
°T
17,5 °
21,0 °
19,0 °
Sun
Press icon [4] to access the graph display mode for climate programming.
5 6 7
1. Days of the week bar
2. Programming mode icon
3. Copy program icon
4. Graph mode icon
5. Start time
6. End time
7. Selected temperature
Press the icon to access scheduling mode.
Mon Tue Wed Thu
17,5 ° 00:00
21,3°
17,1°
13,0°
8,8°
4,7°
0 6 12
Fri Sat Sun
07:00
18 24
29
LOADS
From the loads section you can activate or deactivate the automatic shutdown function for the loads monitored by the home automation system.
CONSUMPTION
The consumption function allows you to monitor energy consumption through graphs and tables.
Press the icon to access the loads menu.
Consumptions
Press the icon to access the consumption menu.
Loads load 1 load 2 load 3 load 4
LOADS
8
319
255
191
127
63.8
0.00
0 4
7
8 12 16 20 24
6 5
Meter 1
Day
06/10/14
3.99kWh
1300W
Wh
4
1
2
3
Swipe your finger up or down to view all the available menu options.
• The system constantly monitors the power absorbed by the system.
• If the reading reaches or exceeds the preset level, the system will shut down active loads to reduce the overall power absorption.
• The function will then automatically re-activate the loads in accordance with changes in the system's power absorption level.
Activate or deactivate the function on the desired loads by selecting/deselecting the corresponding checkbox.
1. Selected meter
2. Information about the time period (day/month/year) and the relative energy consumption.
3. Real-time consumption
4. Change units of measurement/currency
5. Change between graph/table display mode
6. Time axis
7. Consumption axis
8. Consumption graph
Consumi
» AUTOMATIC SHUTDOWN FUNCTION ACTIVE
CARICHI
• In "graph" mode: yellow line 75% of the consumption threshold; red line 100% of the consumption threshold.
15/04/2014
» AUTOMATIC SHUTDOWN FUNCTION INACTIVE
Giorno € Tabella
Period
0-1
1-2
2-3
3-4
4-5
5-6
kWh
0.001
475.0
596.0
0.001
0.001
0.001
from 0% to 75% from 75% to 100% over 100%
6-7 0.001
Zoom with 2 fingers to change the time period
30
9-10 0.089
10-11
11-12
12-13
13-14
0
0
Swipe with your finger to the left or right to
14-15
15-16
16-17
17-18
18-19
19-20
20-21
21-22
22-23
23-24
0
0
0
0
0
0
0
0
0
0
Connesso
2.33M
1.86M
1.39M
932k
466k
0.00
2011 2012 2013 2014 2015
Meter 2
Log
2011
4.15MWh
880W
Wh
251k
201k
150k
100k
50.3k
0.00
J F M A M J J A S O N D
Meter 2
Year
2014
2.12MWh
880W
Wh
CONSUMPTION/PRODUCTION COMPARISON
If the system includes production units (e.g. solar panels), it can provide a comparison between energy production and consumption.
493k
394k
296k
197k
98.7k
0.00
J F M A M J J A S O N D
Meter 2
Year
2014
758kWh
Wh
» The production value is represented by a red line over the consumption figures.
10.7k
8.58k
6.44k
4.29k
2.14k
0.00
1 6 11 16 21 26
Meter 2
Month
September 2014
136kWh
880W
Wh
1.42k
1.13k
853
569
284
0.00
0 4 8 12 16 20 24
Meter 2
Day
10/03/15
10.4kWh
880W
Wh
31
SCENARIOS
The scenarios function allows you to activate previously programmed scenarios (i.e. a set of conditions relative to the devices of the home automation system).
Scenarios
Press the icon to access the scenarios menu.
Press the icon of the desired scenario type to open the relative screen.
scenario 1 scenario 2 scenario 3 scenario 4
SCENARIO
1
2
» The icon will change status if the scheduling of at least one scenario is activated.
» The icon will change status if the condition on at least one scenario is activated.
1. Conditioned scenario (CONDITION ACTIVE)
2. Conditioned scenario (CONDITION NOT ACTIVE)
ACTIVATE A SCENARIO
Swipe your finger up or down to view all the available menu options.
Press the icon of a non-active scenario to activate it.
SCENARIO
Instant
Scheduled
Conditioned
SCENARIO
• To create / rename / change / delete scenarios, see
"SETUP - Scenarios" on page 42.
scenario 1 scenario 2 scenario 3 scenario 4
SCENARIO scenario 1
Confirm activation.
scenario 2
1 scenario 3 scenario 4
2
1. Immediate scenario
2. Immediate scenario with function linked to the anti-intrusion system
DEACTIVATE A SCENARIO
Swipe your finger up or down to view all the available menu options.
Press the icon of an active scenario to deactivate it.
SCENARIO scenario 1 scenario 2 scenario 3 scenario 4
SCENARIO
1
2 scenario 1 scenario 2 scenario 3 scenario 4
1. Scheduled scenario (SCHEDULING NOT ACTIVE)
2. Scheduled scenario (SCHEDULING ACTIVE)
32
Confirm deactivation.
AUDIO BROADCAST
The audio broadcast function allows you to play music and audio files in the various rooms connected to the home automation manager.
AUDIO BROADCAST - Player screen
Short press on a player to open the play panel.
1 2 3 4 5
Audio broadcast
Press the icon to access the function.
Playlist Player 1
1. Song_1
Artist - Album
15
Audio broadcast
3
1. Player_1
1. Song #1
2. Player_2
10. Song #10
3. Player_3
22. Song #22
4. Player_4
13. Song #13
2
1. Player status icon*
2. Sync icon: number shown (e.g. 1) = master player
3. List of available players
* PLAYER STATUS TABLE
Player OFF
Player ON but not playing
Player ON and playing
1
Long press on a player to open the advanced info panel.
6
7
8
9
14 13 12 11 10
1. ON - / OFF icon -
2. Repeat icon (see table R)
3. Shuffle icon (see table)
4. Selected player
5. Playlist icon
6. Scroll to view all the available players
7. Volume + icon
8. Volume level indicator
9. Volume - icon
10. Next track icon
11. Play icon
12. Previous track icon
13. Track progress bar
14. Scroll to view (Player - Playlist - Library)
15. Album artwork
Press the icon to activate the REPEAT function
(each touch activates a different status* of the function).
Favourites page
Synchronise
R TABLE - REPEAT ICON STATUS*
Repeat IDLE (no repeat)
Repeat playlist (repeats current playlist)
Repeat song (repeats an individual song)
Press the icon to add the player to the favourites page.
Press the icon to activate the SHUFFLE function
(each touch activates a different status* of the function).
S TABLE - SHUFFLE ICON STATUS
Standard order (as per playlist)
Random shuffle by song
Random shuffle by album
Press the icon to synchronise the player with another player.
• Press the icon until the id of the desired synchronisation master player is shown, then confirm.
Player
NOT
SYNCHRONISED
1
N
Player SYNCHRONISED with the master player indicated by the number
N
Press the play icon to start playback.
» The icon changes status.
Press the pause icon to pause playback.
33
AUDIO BROADCAST - Playlist screen
Scroll to the left to display the PLAYLIST screen
1 2 3
Player 1
5
1. Song_1
Artist - Album
2. Song_2
Artist - Album
3. Song_3
Artist - Album
4. Song_4
Artist - Album
Playlist Library
4
AUDIO BROADCAST - Scenarios
You can enter up to 10 audio broadcast actions in a home automation scenario.
Select the desired player from those available.
Player_1
Player_2
Player_3
Player_4
SCENARIO
1. Player page icon
2. Selected playlist
3. Library page icon
4. Scroll to view all the available songs
5. Songs contained in the playlist
Short press on a song to start playback.
» The active playback icon will appear next to the song being played.
AUDIO BROADCAST - Library screen
Select the desired actions from those available.
SCENARIO
Self-ignition
Play or pause
Set volume
Enable or disable speaker
Scroll to the left to display the LIBRARY screen
» On selecting an action, an advanced panel opens containing options related to the action selected.
1 2 3
Playlist
5
1. Song_1
Artist - Album
2. Song_2
Artist - Album
3. Song_3
Artist - Album
4. Song_4
Artist - Album
Library
4
SCENARIO
Switch-on
Play or pause
Set volume
Enable or disable speaker
1. Playlist page icon
2. Library page (current page)
3. Playlist / album mode icon
4. Scroll to view all the available songs
5. Songs contained in the library
R TABLE - REPEAT ICON STATUS*
PLAYLIST mode the library displays all the playlists available
ALBUM mode the library displays all the albums available
Press the icon to toggle between PLAYLIST and ALBUM library mode.
34
Adjust the setting, then confirm.
On completion of the operation, return to the scenario screen.
SETUP MENU DESCRIPTION
Press the icon to access the setup menu.
Setup
General parameters-Language
SETUP-General parameters-Language
You can change the interface language.
Language
General parameters
Widgets
Conditions
Consumption
SETUP
Italiano
English
Deutsch
Español
Swipe your finger up or down to view all the available menu
To access the desired sub-menu, press the corresponding icon.
» The available options are: General parameters / Widgets /
Conditions / Consumption / Anti-intrusion / Scenarios / Key
/ Audio broadcast / Protection / Configure event messages /
Advanced.
SETUP - General parameters
SETUP-
General parameters
Select the desired language by pressing the relative icon, then confirm the selection.
LINGUA
Italiano
Confirm language choice?
English
YES NO
Deutsch
Español
• If the system includes a Vedo control panel, the language is automatically set to that used by the control panel itself, regardless of the language selected.
GENERAL SETUP
Language
Lock keys and touch
Set date and time
Information
General parameters-Lock keypad and touch screen
SETUP-General parameters-Lock keypad
and touch screen
The function can be used to lock the device touch screen for 60 seconds, for cleaning purposes.
Swipe your finger up or down to view all the available menu options.
To access the desired sub-menu, press the corresponding icon.
» The available options are: Language / Lock keys and touch / Set date and time / About.
Language
GENERAL SETUP
Confirm lock keypad and touch-screen for 60 seconds?
Lock keys and touch
Set date and time
YES NO
Information
Confirm the operation.
» After 60 seconds, the device is unlocked automatically.
35
General parameters-Set date and time
SETUP-General parameters-
Set date and time
This function allows you to set the time and date of the device.
General parameters-Volume control
SETUP-General parameters-Volume control
The menu allows you to manage and control the audio volumes associated with the various functions of the device.
SET DATE AND TIME
SETUP
1
DD
1 2 3 4 5 6
1. Day setting
2. Month setting
3. Year setting
4. Confirm icon
5. Hours setting
6. Minutes setting
√ If the system includes an alarm control panel, then setting the time becomes a function of the alarm system; this requires the alarm password and any changes made will be applied to the control panel.
Set the desired values for day / month / year / hours / minutes.
12 2014
MM YYYY
Save the configuration.
17
HH
13
MM
Audio
Ringtone
Keys
Alarm
Select the desired function.
Audio
Suoneria
VOL = 0
Tasti
Allarme
SETUP
VOL = 7 VOL = 9
7
• If the system includes a Vedo control panel, the device automatically receives the time and date settings from the alarm control panel
(however, changes made will affect the device and any other connected supervisors).
• Otherwise a function will be activated for setting automatic changeover between summer/winter time, with the choice to customise the date or use the European standard.
General parameters-Information
SETUP-General parameters-
Information
This menu provides technical information about the device (e.g. type of device, versions, addresses, etc.).
Press and drag the cursor to adjust the volume.
Save the configuration.
General parameters-Set ringtones
SETUP-General parameters-
Set ringtones
The menu allows you to manage the ringtones and control the audio volumes associated with the call functions of the device.
Toolbar
Valuta
K CO2
Visualizzazione
CONSUMI
MASTER
IP: 169.254.156.131 (A/16)
MAC: 00:25:29:03:AA:BB
GW: 192.168.1.1
ID: 00000001, SUB: 0
ICONA MANAGER
VIDEO DOOR ENTRY SETUP
External call
Intercom call
Floor door call
Alarms
Select the desired function.
36
Press the icon to exit the screen.
Melody 1
VIDEO DOOR ENTRY SETUP
Melody 2
Melody 3
Melody 4
SETUP-Widgets
SETUP-Widgets
The menu allows you to select which widgets are to be shown on the
HOME page.
SETUP
1 2
Meter 1
Thermo 1
Alarm
Press the name of the melody hear a preview.
Select/deselect the desired option by pressing the corresponding box.
Press the icon to open the volume control panel.
Press and drag the cursor to adjust the volume (as
described in "General parameters-Volume control" on page 36)
Swipe your finger up or down to view all the available menu options.
Select/deselect the desired option by pressing the corresponding box.
Option DESELECTED
Save the configuration.
General parameters-Soft touch keys
SETUP menu-General parameters-
Soft touch keys
This function allows you to decide how to activate the device's soft touch keys (short press/swipe).
Option SELECTED
Swipe keys
Swipe keys
Alarms
Other
Irrigation
Video System
Blinds
Automations
Climate
Lights
5
30
Loads
Alarms
2
6
Thermo
20,0°
17:36
02/10/14
• MAX number of widgets that can be selected simultaneously = 2
37
SETUP-Conditions
SETUP-
Conditions
Consumption-Toolbar
SETUP-Consumption-Toolbar
You can activate/deactivate certain previously programmed conditions.
You can select which meter to display - choosing from those available
- in the FAVOURITES BAR toolbar of the device. See "FAVOURITES" on page 7.
CONDITION SETUP
S 41-6
Sup 41-7
Sup 41-8
Sup 42-8 NC
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Meter 1
Meter 2
Meter 3
Meter 4
12W
CONSUMPTIONS
Swipe your finger up or down to view all the available menu options.
Press the icon to ACTIVATE the corresponding function
Swipe your finger up or down to view all the available menu options.
Select/deselect the desired option by pressing the corresponding box.
Option DESELECTED
» The condition field is highlighted.
Press the icon to DEACTIVATE the corresponding function
Option SELECTED
• Only one meter may be selected at a time!
SETUP-Consumption
SETUP-Consumption
The consumption menu allows you to manage various options related to energy consumption.
CONSUMPTIONS
Consumption-Currency
SETUP-Consumption-
Currency
You can select the currency to use for the display of consumption costs.
√ To display the consumption figures you need to set the tariffs (see
SETUP / CONSUMPTION / TARIFFS)
Toolbar
Currency
K CO2
Display
CONSUMPTION
Swipe your finger up or down to view all the available menu options.
Press the name of the desired function to open the relative menu.
» The available options are: Toolbar / Currency / K CO2 / Display /
Tariffs / Limits / Reset / Settings.
€
$
Fr
R
38
Swipe your finger up or down to view all the available menu options.
Select/deselect the desired option by pressing the corresponding box.
Consumption-Display
SETUP-Consumption-Display
You can choose which of the available meters to display.
Option DESELECTED
CONSUMPTION
Option SELECTED
√ By selecting the CUSTOMISED option, you can assign a customised name to the currency consisting of 3 letters/digits.
Meter 1
Meter 2
Meter 3
Meter 4 q
Aa
123 a w z s e x d r c f t asd y v g h b u n j i k m o l p
Swipe your finger up or down to view all the available menu options.
Select the desired meter by touching and ticking the relative icon.
The icon changes status.
• More than one meter may be selected at a time!
Enter the desired name, then confirm.
Consumption-KCO2
SETUP-Consumption-
KCO2
If the system includes energy production systems (such as solar panels), you can enter the constant CO
CO 2 not emitted into the atmosphere.
2 to monitor the quantity of
Consumption-Tariffs
SETUP-Consumption-
Tariffs
You can the meter tariffs according to the time band.
» The information will then be used to construct the consumption graphs in the Consumption menu.
7
.
4
1
O.531000
8
0
2
5
3
6
9
Consumption 1
Production 1
Consumption 2
Consumption 3
CONSUMPTION
Enter the desired value for KCO 2 , then confirm.
√ Consult your system installer to determine the KCO 2 value.
Swipe your finger up or down to view all the available menu options.
Select the desired meter.
39
4
3
Mon Tue
PROG
Wed Thu
FROM
00:00
Fri
TO
06:59
Sat
Sun
€/kwh
0.15
07:00 20:00 0.25
1
2
Set the desired unit price.
• EXAMPLE: set the cost of 1 kWh to a value of 53.10 cents € per unit.
• 53.10 cents/Euro = 0.531000 €
• enter the value 0.531000 in the screen
1. Days of the week bar
2. Times/Tariffs table
3. Copy program icon
4. Programming mode icon
PROG
Press the programming icon to enter
PROGRAMMINGMODE
.
Enter the desired value, then confirm.
Once you have returned to the main page, you can copy the programmed activity from one day to another:
Mon Tue Wed Thu
23:59
FROM
00:00
07:00
20.01
Fri
TO
06:59
20.00
23:59
Sat
€/kwh
0.15
0.25
0.15
Sun
Mon Tue Wed Thu
TIME
Fri Sat
STATE
05:00 ON
09:00 OFF
Sun
You can select the day/s to be modified by pressing the corresponding icon on the top bar.
» The selected day/s will be highlighted in red.
Press to add a programme to the list
Set the desired time/status.
Press to confirm.
» The value being modified is highlighted in yellow.
Press to DELETE a programme.
Select the day of the week to copied in the band at the top.
» The source day is highlighted in yellow.
Press the icon to copy the programme, then select the destination days to which the programme is to be copied.
» The selected destination days are highlighted in red.
Press to confirm.
Press the icon to return to the previous screen.
40
• Daily tariff programming must apply to the whole 24-hour cycle!
Any hours not programmed by the user will be set by the system automatically.
Consumption-Limits
SETUP-Consumption-Limits
You can set the maximum consumption limits by Hour / Day /
Month / Year in order to obtain an immediate visual indication in the consumption graph and table if the set limit for the period is exceeded.
Consumption-Settings
SETUP-Consumption-
Settings
This function allows you to change certain characteristics of the meters installed.
» In "graph" mode: yellow line 75% of the set limit; red line 100% of the set limit.
» In "table" mode, the boxes are coloured using the same criteria to indicate the consumption level.
CONSUMPTION
Meter
1
Meter
2
Meter
3
1
2
Meter 1
Meter 2
Meter 3
Meter 4
1
5
9
2
6
0
3
7
.
4
8
Time
Day
Month
Year kwh
3
4
Select the desired meter from those available.
» A panel opens containing the meter characteristics that can be changed.
5
1. Available meters / selected meter
2. Value entered
3. Value being edited
4. Confirm icon
5. Set values column
Swipe your finger to the left or right to view the available meters.
Select the option you wish to edit and enter the value.
Unit of meas.
Pulses
Step
Scale factor
CONSUMPTION
Confirm the operation.
Select the characteristic to be changed:
Settings-Units of measurement
SETUP-Consumption-Settings-Units of measurement
Consumption-Reset (meters)
SETUP-Consumption-
Reset
The function resets all the meters.
Consumption
Tarifs
Thresholds
Reset
Settings
YES
Reset count on all meters?
NO q
Aa
123 a w z s e x d r c f t mc y v g h b u n j i k m o l p
Enter the desired value, then confirm.
Confirm the reset.
41
Settings-Pulses
SETUP-Consumption-Settings-Pulses
√ EXAMPLE the pulse counter measures 1 mc every 10 pulses; set the PULSES and INCREMENT values to respectively 10 and 1.
SETUP - Anti-intrusion
SETUP-Anti-intrusion
Enter the alarm password to access the area.
ALARM SETUP
Change PIN
Voice menu
Installer
Timer
See "ALARM SETTINGS" on page 13.
Enter the desired value, then confirm.
Settings-Increment
SETUP-Consumption-Settings-Increment
SETUP - Scenarios
SETUP-Scenarios
From the menu you can create, rename, edit or delete one or more scenarios in one of the three available categories.
1
4
7
5
8
256
2
0
3
6
9
Enter the desired value, then confirm.
SCENARIO
Climate
Other
Blinds
Lights
Press the desired function to open the specific menu.
Settings-Scale factor
SETUP-Consumption-Settings-
Scale factor
• This parameter serves to setup conversion of the units of measurement displayed. For example, your heating system meters use calories but you want to display the values in Joules.
Immediate scenarios
SETUP-Immediate scenarios
SCENARIO
1.000000
one
7
.
4
1
8
0
2
5
3
6
9 two three four
1 2
Enter the desired value, then confirm.
1. New scenario icon
2. List of available scenarios
3. Alarm scenario icon
42
3
Scenario activation
Press the scenario you wish to activate.
Scenario 1
SCENARIO
Activate scenario?
YES NO
SCENARIO room 1 room 2 room 3 room 4
1 2
1. ENTIRE ROOM selection icon
2. List of associable functions available
3. Functions advanced info column
4. Selected function identification icon
Press to select the entire room.
0/4
0/4
0/4
0/3
3 4
Confirm the selection.
Creating new scenarios
Press the icon to create a new scenario.
q
Aa
123 a w z s e x d r c f t new y v g h b u n j i k m o l p room 1 room 2 room 3 room 4
SCENARIO
OFF ON
0/4
0/4
0/4
0/3
Assign a name to the scenario, then confirm.
1 2 3 4
» The screen shows the functions available for insertion in the scenario.
1. Off icon
2. Confirm icon
3. On icon
4. Delay scenario icon
SCENARIO
Select the desired status and press the icon to confirm.
Climate
Other
Blinds
Lights
» The functions that can be associated with a scenario are: Climate
/ Other / Blinds / Lights / Irrigation / Automations / Door entry monitors / Notifications / Alerts / Audio broadcast*.
Press the icon of the desired function to associate it with the scenario
» The panel relative to the selected function opens, from which you can choose which specific characteristics of the function to activate (e.g. zones, schedules, status...)
• You can select multiple functions to add to the scenario!
• In the case of the BLINDS, the ON/OFF icons are replaced respectively by the icons .
• In the case of RGB and DIMMER LIGHTS, the colour adjustment and brightness control icons are also shown.
• In the case of the ALARM function, it is necessary to ENTER THE ALARM
CODE in order to be able to activate the desired alarm function.
• For a detailed description of each function (Alarm / Climate / Other / Blinds
/ Lights / Irrigation / Automations) see the specific chapters in this manual.
» For more information on inserting audio broadcast actions see
"AUDIO BROADCAST - Scenarios" on page 34
When you have finished entering the desired functions, press the icon to exit.
43
» A confirmation screen opens.
Irrigation
SCENARIO
Confirm exit from scenario creation?
Auton
Video System
YES NO
Alarm
Advanced scenario functions
SCENARIO one two three four
Irrigation
Auton
Video System
Alarm
SCENARIO
Can now save the scenario
C
Long press on a scenario to open the advanced functions menu.
Rename
Edit
Favourites page
Move
Delete
Press to confirm.
Delay a scenario
By setting a time delay, you can delay the execution of the commands in the scenario. For example, you can switch on the outdoor lights along a driveway in sequence, one very 5 seconds.
Rename a scenario
From the scenario function insertion window, press the icon and select the desired time delay.
Press the icon to rename the scenario.
room 1 room 2 room 3 room 4
SCENARIO
00:00
1
2
1. Time setting panel
2. Confirm icon
44
» The icon changes status.
0/4
0/4
0/4
0/3 q
Aa
123 a w z s e x d r c f t one y v g h b u n j i k m o l p
Name the scenario and confirm by pressing the icon.
When you have finished entering the desired functions, press the icon to exit.
Move a scenario
Press the icon to move the scenario (from the position in which it appears in the list of available scenarios).
Favourites page
Press the icon to add the scenario to the favourites. one two three four
SCENARIO
Position
1
SCENARIO
Do you want to add the element to your bookmarks?
TERMO 21.2 INVERNO
YES NO
Define the desired position and confirm by pressing the icon, then exit.
Confirm the operation.
Scheduled scenarios
SETUP-Scheduled scenarios
Modify a scenario
Press the icon to modify the functions associated with the selected scenario.
SCENARIO
SCENARIO
Climate
Other
Blinds
Lights
Press the desired function to open the specific menu.
Delete a scenario
Scheduled 1
Scheduled 2
Scheduled 3
Scheduled 4
Press the icon to delete a previously created scenario.
Scenario 1
SCENARIO
Confirm removal of camera?
YES NO
1
2
1. Scheduled scenario deactivated
2. Conditioned scenario activated
Press on a specific scenario to ACTIVATE / DEACTIVATE the scheduled scenario.
Creating a new scheduled scenario
See "Creating new scenarios" on page 43
• You need to add a schedule to the scenario using the same as
procedure as "FUNCTION SCHEDULING" on page 20
Advanced scheduled scenario functions
See "Advanced scenario functions" on page 44
• The option "Favourites page" is replaced by the option
"Scheduling", which allows you modify the scheduling of individual scheduled scenarios.
Press to confirm.
45
Conditioned scenarios
SETUP-Scenarios-
Conditioned
SCENARIO
Advanced conditioned scenario functions
See "Advanced scenario functions" on page 44
• The option "Favourites page" is replaced by the option
"Conditions", which allows you modify the conditions associated with individual conditioned scenarios.
Conditioned 1
Conditioned 2
Conditioned 3
Conditioned 4
1
2
1. Conditioned scenario deactivated
2. Conditioned scenario activated
Creating a new conditioned scenario
• You need to activate at least one of the available conditions in the categories HOME AUTOMATION / ALARM / DOOR ENTRY
MONITORS.
• HOME AUTOMATION: allows execution of a scenario when an input in the home automation system opens or closes.
• ALARM: allows execution of a scenario when one or more sensors of the anti-intrusion system remain/s in a certain condition (open or closed) for the time period set by the user.
• DOOR ENTRY MONITORS: allows execution of a scenario on receipt of an incoming EXTERNAL, INTERCOM or FLOOR DOOR call or ALARM.
SETUP-Key
SETUP-Key
The menu allows you to manage the proximity keys and their associated functions.
• If there are already keys registered with the VEDO control panel, the system requires you to enter the
ALARM PASSWORD!
REC
Key 1
Key 2
Key 3
Key 4
KEY
SET CONDITIONS
Home automation
Alarm
Video System
Press the desired category to open the dedicated sub-menu.
And
• The following characteristics apply only to the conditions in the
ALARM category.
The AND/OR function determines whether a number off conditions must be met SIMULTANEOUSLY or if only
ONE of the selected conditions need to be satisfied for the scenario to be activated.
Or
Press the icon to toggle between AND and OR mode.
SET CONDITIONS
Condition
00:00
Condition
Or
Condition
Condition alarm 4
• You can set an expiry time for the conditioned scenario (activated by the condition/s or by the alarm) after which the scenario will be deactivated again.
1
1. New key registration icon
2. List of registered keys
Register a new key
2
REC
Press the registration icon then pass the new key next to the proximity sensor of the device.
KEY
Key 2
Pass new key
Key 3
C
Key 4
46
Advanced key functions
SETUP-Key
KEY
REC
Key 1
Key 2
Key 3
Key 4
Modify a key
SETUP-Key-Advanced functions-
Modify
Press the icon to modify the scenarios associated with the selected key.
• 2 scenarios may be selected: one IN and one OUT.
• Only IMMEDIATE scenarios can be selected!
Long press on a key to open the advanced functions menu.
Scenario In
Scenario Out
KEY
REC
Rename
CHIAVETTA
Chiave 1
Edit
Chiave 2
Alarm
Chiave 3
Chiave 4
Move
Delete
Press the desired function to open the dedicated menu.
SCENARIO
Rename a key
SETUP-Key-Advanced functions-
Rename
Press the icon to rename the key.
Carry out the operations as for the "Rename a scenario" on page
Move a key
SETUP-Key-Advanced functions-
Move
Press the icon to move the key (from the position in which it appears in the list of available keys).
Carry out the operations as for the "Move a scenario" on page
one two three four
Select the scenario by pressing the icon.
» The icon changes status.
When you have finished entering the desired functions, press the icon to exit.
47
Delete a key
SETUP-Key-Advanced functions-
Delete
Press the icon to delete a previously registered key.
• Do not throw away the key! The key has now been reset and is ready to configured anew.
SETUP - Audio broadcast
From this menu you can manage the operating parameters of the audio broadcast function.
• For configuration of the media server, refer to the technical documentation available online at the address http://wiki.slimdevices.com/index.php/Logitech_Media_Server
• For configuration of the player, refer to the manual art 20004500 /
20004501 / 20004502
Carry out the operations as for the "Delete a scenario" on page
SETUP
Alarm
SETUP-Key-Advanced functions-
Alarm
• This function allows you to register the key in the VEDO alarm control panel.
• Once registered, the key can be used to execute scenarios that contain commands addressed to the VEDO control panel.
Enable
Address IP
Port
Username
KEY
User 1
User 2
User 3
User 4
Select the user to be associated with the key.
Tick the ENABLE box to activate the audio broadcast function.
» The parameters that can be configured are:
IP address / Port / Username / Password.
Press the desired parameter to open the dedicated menu.
IP address
SETUP-Audio broadcast-IP address
Enter the IP address of the desired audio broadcast server, then confirm.
7
.
1
4
192.168.1.226
8
0
2
5
• DEFAULT VALUE: 192.168.1.226
3
6
9
48
Port
SETUP-Audio broadcast-Port
Enter the port of the desired audio broadcast server, then confirm.
SETUP - Protection
From this menu you can manage the system passwords and security parameters.
1
4
7
9000
2
5
8
0
3
6
9
PROTECTION
User password
Advanced password
Home automation limits
• DEFAULT VALUE: 9000
Username
SETUP-Audio broadcast-Username
Enter the desired username, then confirm.
q
Aa
123 a w s z e x d r f c t admin y v g h b u n j i k m o l p
Press the desired option to open the relative menu.
User password
SETUP-Protection-User password
1
4
7
HOME AUTOMATION PASSWORD
123456
2
5
8
0
3
6
9
Enter the required password and confirm.
Password
SETUP-Audio broadcast-Password
Enter the password associated with the username and confirm.
q
Aa
123 a w z s e x d r f c t
***** y v g h b u n j i k m o l p
ENTER NEW
PIN
REPEAT NEW
PIN
ADVANCED SETUP
1
4
7 8
0
2
5
Enter the NEW password and confirm.
Enter the password again.
3
6
9
• Max. password length is 8 digits!
Advanced passwords
SETUP-Protection-Advanced passwords
See "User password" on page 49.
49
Home automation limits
SETUP-Protection-Home automation limits
This function allows you to choose which functions (from those available) to password protect.
SETUP - Advanced
Touch lock
HOME AUTOMATION LIMITS
Scheduling lock
Setup lock
ADVANCED SETUP
Prog. Keys
Total reset
Update configurations
Import/Export
Press the icon of the desired function to activate password protection.
SETUP - Configure event messages
From this menu you can configure the email addresses of the recipients of automatic messages sent on activation of a previously configured input.
• Maximum of 4 recipients!
Swipe your finger up or down to view all the available menu options.
To access the desired sub-menu, press the corresponding icon.
» The available options are: Programming keys / Total reset / Update configurations / Import/Export / Product update / Disable-Enable
VEDO alarm/ Home automation / Door entry monitors.
Configure recipient 1
Configure recipient 2
Configure recipient 3
Configure recipient 4
SETUP
Programming keys
SETUP-ADVANCED-Programming keys
From this menu you can assign one of the available functions to each of the PROGRAMMABLE KEYS.
KEY SETUP
Press on the desired recipient to enter or edit the address.
Key
Key 1
Key 2
Key 3 q
Aa
123 a w
.
z s e
[email protected]
r t y u i x d
@ f c v g h b n j k m o l p
Enter the address and confirm.
Swipe your finger up or down to view all the available menu options.
To access the desired sub-menu, press the corresponding icon.
• For a list of the available functions that can be associated, refer to
50
Total reset
SETUP-ADVANCED-
Total reset
This function deletes all user, door entry monitor, home automation and alarm system settings, plus calibration settings, restoring the default settings of the product.
Create backup
SETUP-ADVANCED-Import/Export-
Create backup
This function allows you to create a complete system backup and to save it on an SD card.
ADVANCED SETUP
Prog. tasti
Confirm user and system configuration reset?
Total reset
YES
Update configurations
NO
Import/Export
IMPORT/EXPORT
Create backup Confirm backup creation?
Import backup
YES
Export configurations
NO
Import scenarios
Confirm the operation.
Update configurations
SETUP-ADVANCED-Update configurations
The function updates all the home automation settings of the system, loading the current settings in the micro SD configured using
SimpleProg.
Import backup
SETUP-ADVANCED-Import/Export-
Import backup
This function allows you to import a complete system backup from an SD card.
ADVANCED SETUP
Prog. Keys
Do you confirm configuration updating ?
Total reset
YES
Update configurations
NO
IMPORT/EXPORT
Create backup
Confirm backup restore?
Import backup
YES
Export configurations
NO
Import scenarios
Import/Export
Confirm the operation.
Import/export
SETUP-ADVANCED-Import/Export
The function can be used to save or load all user, home automation and alarm system configurations.
Export configuration
SETUP-ADVANCED-Import/Export-Export configuration
This function allows you to export the device configurations
(scenarios; settings; home automation; home automation schedules) to an SD card.
• An SD card with sufficient memory to save the backup file is required. Otherwise the system will display an error message.
IMPORT/EXPORT
IMPORT/EXPORT
Create backup
Import backup
YES
Export configurations
Confirm export?
NO
Import scenarios
Create backup
Import backup
Export configurations
Import scenarios
To access the desired functions, press the corresponding icon.
» The available options are: Create backup / Import backup /
Export configurations / Import scenarios / Import settings / Import door entry monitors / Import home automation / Import home automation schedule.
51
Import scenarios
SETUP-ADVANCED-Import/Export-
Import scenarios
This function allows you to import previously saved immediate, scheduled and conditioned home automation scenarios.
• SLAVE devices do not import conditioned scenarios!
Update product
SETUP-ADVANCED-
Update product
This function allows you to update the product firmware from an SD card.
√ Before proceeding with the update, you must insert an SD card containing at least one set of updated firmware.
• ONLY one set of firmware can be loaded at a time.
• The user must have the necessary privileges to perform the operation! Otherwise it can be enabled from Safe Manager.
Scenario 1
Scenario 2
Scenario 3
Scenario 4
SCENARIO
ADVANCED SETUP
Prog. Keys
Confirm product update?
Total reset
YES
Update configurations
NO
Import/Export
2
1
Swipe your finger up or down to view all the available menu options.
1. Select one or more scenarios by pressing the corresponding icon.
2. Confirm the operation.
Import settings
SETUP-ADVANCED-Import/Export-
Import settings
Confirm and proceed with the update.
Disable / Enable Vedo alarm
SETUP-ADVANCED-Disable Vedo alarm / Enable Vedo alarm
This function allows you to disable or enable the alarm function of the Vedo control panel and all the characteristics associated with it in the system.
Confirm the enable/disable operation.
• The function imports favourites, audio/video import and language.
• Only data exported from a device of the same type may be imported!
Import home automation
SETUP-ADVANCED-Import/Export-
Import home automation
• The function imports meter settings including the limits and tariffs table
• Imports consumption settings
• Imports home automation settings
Import home automation scheduling
SETUP-ADVANCED-Import/Export-
Import home automation scheduling
• The functions serve to import the timer settings of the home automation outputs to the device.
Select the desired function by pressing the relative icon; confirm the operation.
52
IMPORT/EXPORT
Create backup
Import backup
YES
Export configurations
Confirm import?
NO
Import scenarios
SETUP - Home automation
SETUP-ADVANCED-
Home automation
The section allows you to manage the home automation system parameters.
HOME AUTOMATION
Reset configurations
Transmission time
No. of transmissions
Polling time
To access the desired functions, press the corresponding icon.
Home automation - Reset configurations
SETUP-ADVANCED-Home automation-Reset configurations
This function allows you to reset the home automation configuration previously loaded on the system.
Confirm the operation in order to proceed.
53
Door entry monitors
SETUP-ADVANCED-Door entry monitors
The section allows you to manage the parameters of the door entry monitor system.
VIDEO SYSTEM
Addresses
Actuator directory
Cameras directory
Intercom Directory
4
1
7
00000001
2
5
8
0
3
6
9
Enter the desired value, then confirm.
Swipe your finger up or down to view all the available menu options.
To access the desired function, press the corresponding icon.
» The available options are: Addresses / Actuators directory /
Cameras directory / Intercoms directory / Set tone repetition /
Set call times / Call divert / Alarms / Doors directory / Set audio messages / Hands-free / Always record / Configure multiple addresses.
Door entry monitors - Addresses
SETUP-ADVANCED-Door entry monitors-Addresses
This function allows you set the Vip address of the device.
Door entry monitors - Actuators directory
SETUP-ADVANCED-Door entry monitors-Actuators directory
This function allows you to add and manage actuators connected to the ViP system.
ADDRESS
Configure ViP address
Master
Slave 1
Press the icon to add a new element.
Press CONFIGURE VIP ADDRESS to open the panel in which you can enter the ViP address.
Select the device category of MASTER or SLAVE.
54
• CONFIGURE NAME allows you to enter or edit the name of the device to be entered in the list.
Door entry monitors - Cameras directory
SETUP-ADVANCED-Door entry monitors-Cameras directory
This function allows you manage a directory of the cameras connected to ViP systems or via RTSP protocol.
CAMERAS
123 q
Aa
123 a w z s e x d r c f t v g y h b u i n j k m o l p
Camera 1
Camera 2
Camera 3
Camera 4
Enter the desired name, then confirm.
• CONFIGURE VIP ADDRESS
Allows you to enter or edit the ViP address of the device to which you want to connect.
Press on the name of the camera, then confirm the operation to start playback of the camera images.
Press the icon to call a specific ViP address.
Enter the address in the field to start the communication.
Press the icon to add a new element.
4
7
1
00000001
2
5
8
0
3
6
9
√ VIP MODE
CAMERAS
Configure name
Configure ViP address
Camera automatic
Camera number 1
ViP
1
Enter the desired value, then confirm.
1. ViP / RTSP mode toggle icon
• MODULE enter the code of the desired relay module / interface.
• Code 255 = art. 1443 with 1 relay + 1 open collector output
• If the interface module SK9071 is used (equipped with 10 relays), it will be necessary to enter the code of the module itself.
• CONFIGURE NAME
see "CONFIGURE NAME" on page 55
• CONFIGURE VIP ADDRESS
see "CONFIGURE VIP ADDRESS" on page 55
• OUTPUT enter the code of the output, chosen from those available.
• With 1443 you can select 1 for on-board relay or 2 for open collector output.
• With the SK9071 module you can select one of its 10 relay contacts.
• CAMERA AUTOMATIC / CAMERA NUMBER
Select the type of camera you wish to add.
• Example CAMERA AUTOMATIC = telecamera external unit camera connected to ViP address.
• Example CAMERA NUMBER = camera connected to art. 1445.
IT is necessary to set the number of the terminal (1-2-3-4) corresponding to the camera in question!
55
Press the icon (1) to move to the next mode.
ViP > RTSP
RTSP > ViP
√ RTSP MODE
Door entry monitors - Intercoms directory
SETUP-ADVANCED-Door entry monitors-Intercoms directory
This function allows you to add and manage the intercoms connected to the ViP system.
CAMERAS
Configure name
Configure RTSP address
Configure RTSP user name
Configure RTSP password
• CONFIGURE NAME
see "CONFIGURE NAME" on page 55
• CONFIGURE VIP ADDRESS
• CONFIGURE RTSP USER NAME
• CONFIGURE RTSP PASSWORD q
Aa
123 a w z s e x d r c f t value y v g h b u n j i k m o l p
Enter the desired value, then confirm.
RTSP
Intercom 1
Intercom 2
Intercom 3
Intercom 4
INTERCOMS
123
Press on the name of the intercom, then confirm the operation to start the call.
Press the icon to call a specific ViP address.
Enter the address in the field to start the communication.
Press the icon to add a new element.
INTERCOMS
Configure name
Configure ViP address
Master
Slave 1
• The options CONFIGURE VIP ADDRESS, MASTER and SLAVE are mutually exclusive.
• If CONFIGURE VIP ADDRESS is selected (and an address is entered), the call will be directed to entire system of the apartment
(MainAddress)
• If Master is selected (from a slave device), the call will be directed to the system designated the MASTER DEVICE
• If Slave is selected and the sub address is specified (from the
Master or another Slave device), the call will be directed to the
SLAVE DEVICE in the same system identified by the specified sub address.
• CONFIGURE NAME
see "CONFIGURE NAME" on page 55
• CONFIGURE VIP ADDRESS
see "CONFIGURE VIP ADDRESS" on page 55
56
Door entry monitors - Set tone repetition
SETUP-ADVANCED-Door entry monitors-Set tone repetition
This function allows you to set the number times the tone is repeated for each of the applicable events.
Door entry monitors - Call divert
SETUP-ADVANCED-Door entry monitors-
Call divert
From this menu you can set and manage call diversion to another ViP device in the event of no reply or absence.
External call
SET TONE REPETITION
1
Intercom call
Floor door call
1
1
CALL DIVERT
Configure ViP address
Waiting time
Activate timed divert
Activate divert when busy
10
Set the desired value by pressing the icons "+" and "-".
Door entry monitors - Set call times
SETUP-ADVANCED-Door entry monitors-
Set call times
This function allows you set the durations of some of the timers (in seconds) associated with door entry monitor functions.
• CONFIGURE VIP ADDRESS
Allows you to enter the address of the device to which the emergency call is to be directed.
• WAITING TIME is the time interval (in seconds) between the arrival of a call and its diversion (in the case of no reply) to another ViP device. Adjust by pressing "+" and "-".
• The waiting time value only applies when the ACTIVATE TIMED
DIVERT function is enabled (see below).
Awaiting Reply
SET CALL TIMES
60
Conversation
Intercom Conversation
Reset wait time
90
90
10
• ACTIVATE TIMED DIVERT
Selecting this function activates call divert in the event of no replay of absence.
• ACTIVATE DIVERT WHEN BUSY
Selecting this function activates call divert if a call is received when the device is already busy with another call.
• If the CALL DIVERT function has been CONFIGURED, then the
DOOR ENTRY MONITORS menu will display an icon for the rapid activation/deactivation of the function.
Set the desired value by pressing the icons "+" and "-".
Intercoms
Ans. serv. setup
Video memory
Cameras
Messages
Doors open
Call divert
Audio message
Multiple addresses
Alarm
2
6
Anti-intrusion
20,0°
17:36
02/10/14
57
Door entry monitors - Alarms
SETUP-ADVANCED-Door entry monitors-
Alarms
From this menu you can set and manage a series of previously programmed emergency/alarm calls to a control panel.
Door entry monitors- Doors directory
SETUP-ADVANCED-Door entry monitors-Doors directory
This function allows you to add and manage electronic locks (doors) connected to the door entry monitor system.
• YOU can also associate a pre-recorded audio message on an SD card to an emergency call.
• Consult your installer for configuration of alarm calls!
Doors open
Alarm
Panic
Fire
Priority call 4
ALARM
Door 1
Door 2
Door 3
Door 4
Press on the name of the door, then confirm the operation to start the call.
Press the icon to add a new element.
Press next to the required call type to open the corresponding sub-menu.
Configure ViP address
Audio message
Call received audio message
4
1
7
00000001
2
5
8
0
3
6
9
• CONFIGURE VIP ADDRESS
Allows you to enter the address of the device to which the emergency call is to be directed.
See "CONFIGURE VIP ADDRESS" on page 55
• AUDIO MESSAGE
This function - when selected - allows you to send a prerecorded audio message as an emergency call.
• The message must saved on the SD card.
• Consult your installer for configuration of the audio message and alarm calls!
Enter the desired value, then confirm.
Door entry monitors - Import audio message
SETUP-ADVANCED-Door entry monitors-Import audio message
This function allows you import audio messages from an SD Card for use with the function "Door entry monitors - Alarms" on page 67.
• Consult your installer for configuration of the audio message and alarm calls!
• CALL RECEIVED AUDIO MESSAGE
When selected, this function allows a pre-recorded message to be launched automatically if a priority emergency message is received by the monitor.
58
Door entry monitors - Hands-free
SETUP-ADVANCED-Door entry monitors-Hands-free
The function - when active - automatically opens audio on receipt of a call from an external unit.
Press the icon to activate the function.
» The icon changes status.
Door entry monitors - Always record
SETUP-ADVANCED-Door entry monitors-Always record
When activated, the function automatically starts audio/video recording on receipt of a call from an external unit.
Press the icon to activate the function.
» The icon changes status.
• Recordings are saved to the SD card
• Go to DOOR ENTRY MONITORS - Video memory - to view and manage recordings.
Door entry monitors - Configure multiple addresses
SETUP-ADVANCED-Door entry monitors-Configure multiple addresses
This function allows you to respond (in addition to calls directed to the device) to calls directed to one or more additional devices in the same network.
Press the icon to add a device.
MULTIPLE ADDRESSES
Configure ViP address
Slave 1
Enter the ViP address of the desired device by pressing the corresponding icon; then select the slave address using the +/- keys.
• To quickly enable/disable the function, see the DOOR ENTRY
MONITORS menu
59
1st edition 05/2015 code 2G40001384
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project