Air Techniques ProVecta HD Intraoral X-Ray Owner's Manual

Air Techniques ProVecta HD Intraoral X-Ray is a versatile and reliable dental imaging solution designed to meet the diverse needs of modern dental practices. With its advanced features and exceptional image quality, the ProVecta HD empowers clinicians to make confident diagnostic decisions and enhance patient care.

Key capabilities of the ProVecta HD include:

16" C to C Wall Mount Plate for secure and stable installation on wooden wall studs.
Precise and accurate positioning with the 16-inch on-center mount installation method.
Robust construction capable of withstanding significant shear and withdrawal forces, ensuring reliable operation even in demanding environments.

PDF Download

Document

Intraoral Dental X-ray System

Wall Mounting Plate, 16” C to C,

Installation Kit

Part Number: A6330

INSTRUCTION SHEET

General

The ProVecta HD 16 Center to Center Wall Mount Plate is used to secure the ProVecta HD X-ray unit onto a facility wall via two wooden 2” X 4” (1 1/2” x 3 1/2”) wall studs located 16 inches on center apart. This kit is intended for use with wood wall studs and provides appropriate hardware. Use is prohibited on installations with metal wall studs. Make sure to perform the installation using and in accordance with local code.

16 Inch on Center Mount Installation

Install the Provecta HD using the 16 inch on center mounting method by performing the following procedures.

1. Locate the wall studs to mount 16 inch on center wall plate (P/N A6341). Install power and control wiring electrical boxes using template P/N A6343 for proper positioning.

2. Mark template holes at screw holes (A, B, C, D) making sure each is centered on the wooden wall studs.

3. Drill 1/4-inch pilot holes of the wooden wall studs.

4. Mount the 16 inch on center wall plate to wall studs using four 3/8 inch x 3 1/2 inches lag bolts with associated spring washers and flat washers into screw holes (A, B, C, D).

Make sure plate is level before tightening bolts.

5. Cover each screw hole by installing four screw hole plugs.

6. Mount the X-Ray Control Unit onto 16 inch on center wall plate by aligning screw holes and installing four 1/4 inch x 20 inches hex head bolts with associated spring washers and flat washers into screw holes (1, 2, 3, 4) .

7. Level plate and tighten bolts making sure plate stays level.

8. Continue with Provecta HD installation.

Mounting

Screw Hole

Cable/Wiring

Feed Through

Mounting

Screw Hole

Mounting

Screw Hole

Cable/Wiring

Feed Through

Mounting

Screw Hole

Caution: Load Capacity

The wall support and mounting hardware for installing the Provecta HD using the

16 center to center wall mount plate must withstand a shear load 240 pounds (109 kg) and a withdrawal force of 1560 lbf (708 kgf).

The wall fabrication and attachments to the building structure must be capable of withstanding a moment load of 1474 lbf ft (204 kgf m)

Caution

Kit is designed for use with wood wall studs and not intended to be used on any other installations.

Not for use with metal wall studs.

Never reuse old screw holes.

Supplied Contents of Kit P/N A6330

Part No.

Description

A6341

A6343

31547

Wall Mounting Plate, 16” C To C and fastening hardware

Installation Template,16” C To C Wall Mount

Screw hole plugs

Qty

1295 Walt Whitman Road | Melville, New York 11747- 3062

Phone: 800-247-8324 | Fax: 888-247-8481

Website: www.airtechniques.com

A6427

Included for Customer Convenience

5MM Power Ball-Hex T-Key Wrench

For instructions for use, refer to the ProVecta HD

Installation Guide (A6385) section titled

“Scissor Arm Tension Alignment”

•

P/N A6344, Rev. D - July 2021

Hello! I am an AI chatbot specifically trained to assist you with the Air Techniques ProVecta HD Intraoral X-Ray Owner's Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated