User`s Manual
User Guide
RITE Touch
* The functions and design of this product can be
changed for quality improvement without prior notice.
Safety Features
2
This product is for indoor
use only.
Do not attempt to
disassemble the RITE
Touch. To do so may
result in injury and
product damage.
Do not apply water directly to
the RITE Touch. Do not apply
chemical substances such as
alcohol during cleaning.
Do not force with a tool.
Keep the PIN code concealed.
Do not let an unauthorized
person observe the PIN code.
Ensure the door is securely
locked when leaving the area,
especially in manual lock mode.
Keep the surface of the lock
free from foreign materials
and debris. Do not use touch
pad with dirty or wet fingers.
Ensure the glass door surface
is free from films and protective
coverings before installation.
For double doors, it is
recommended that the strike
side is stationary.
Advanced Mode
Advanced Mode can be used for professional and high security
management.
2
Magic Mirror
The Magic Mirror design allows the keypad to appear on the mirror as
soon as it is touched by a user. The user can also use the Magic Mirror to
visually survey the surroundings to monitor safety and security.
3
Safe Thumb-Turn
The manual thumb-turn enhances user security by requiring the pressing
of the two safe buttons on either side of the knob and simultaneous turning
of the knob.
4
Modern Design
The sophistication of the digital keypad technology is complemented by the
elegantly thin design of the solid lock base.
5
High Temperature Alarm
In the event of a fire, an audible alarm will be triggered and the lock will
automatically retract the deadbolt.
Product Features
1
3
Components Overview
Basic Contents
• User Guide
• Installation Template
• Card Keys (x4)
• Mounting Screws
Front Body
Back Body
Strike for Double Doors
Single Door Magnet
Extension type deadbolt
10mm door thickness
gasket (13/32”)
Specifications
Parts
Specifications
Front Body
9/16(D) x 2-7/8(W) x 7-5/16(H) inches
14(D) x 73(W) x 186 (H) millimeters
Back Body
1-15/16(D) x 3-1/16(W) x 7-1/2(H) inches
49(D) x 77.5(W) x 190.5(H) millimeters
Battery
1.5 AA Alkaline batteries x4
Operating voltage: 4.5 – 6 V
Remarks
Operating Temperature:
5 to 130 °F
-15 to 55 °C
Effective for 1 year
(based on 10 daily uses)
Due to the nature of the Magic Mirror, exposure to intense direct light may change
the color of the product over time.
4
Specifications
Front Body
Back Body
Keypad
Battery
Cover
Slot for Remote
Control module
(sold separately)
Low Battery
Indicator
® Registration
Button
Manual
Thumb Turn
Card
Reader
Safe Knob
Open/Close
Button
Emergency Power
Supply Terminal
Dead Bolt
5
Operating Instructions
Using the Keypad
Registering User PIN Code
User PIN Code must be 4 to 12 digits. Special characters [*] and [#] are not allowed.
Press ®
(Registration) button
Enter User PIN Code
(4 to 12 digits)
Press ®
(Registration) button
Enter User PIN Code
(4 to 12 digits)
Touch with palm or
press [*] button to end
Contact all the cards
you wish to register
one by one
Press ®
(Registration) button
Open Door with User PIN Code
Touch with palm
Using the Card Reader
Registering Card Keys
Press ®
(Registration) button
Open Door with Card Key
Contact Card Key
Caution
∙ Keep the door open while you register card keys to prevent accidentally getting locked out.
∙ Previously registered card keys will automatically be deleted when new card keys are registered.
∙ For security, please use only the RF cards provided in this package.
6
To Close Door from Outside
Step
Icon
Description
Manual lock status
Touch the keypad on the front body gently with your
palm to lock the door.
Auto lock status
The built-in auto lock sensor automatically locks the
door within 5 seconds after closing the door.
To Close Door from Inside
Step
Manual lock status
(default setting)
Icon
Operating Instructions
Locking the Door
Description
Turn the manual thumb turn to unlock while pressing
safe thumb turn buttons together.
Press open/close button.
Auto lock status
The built-in auto lock sensor automatically locks
the door within 5 seconds after closing the door. If
an auto-lock magnet is not installed, the auto-lock
feature is not enabled.
If the door is twisted, the auto-lock feature will not function properly. Please check before use.
7
Operating Instructions
Forced Lock
Outside Forced Lock Setting - PIN Code
Touch with palm
Enter User PIN Code
Outside Forced Lock Setting - Card Key
Contact Card Key for 3 seconds until you hear 3 beeps.
∙ If compulsory external lock is set up, the door open/close button will not function. The alarm will go off if
someone tries to open the door by manually opening/closing the unit.
∙ To open the door by manually opening/closing the unit under compulsory external lock setting,
completely turn the knob within one second, or else the door will lock itself again.
Inside Forced Lock Setting
Set
Press and hold the open/close button for 5 seconds.
Release
Press the ® Registration button or turn the manual
thumb turn while pressing buttons together.
8
Press and hold [#]
button for 3 seconds
To Set Automatic Locking Mode
Auto-lock setting locks a door within 5 seconds after closing the door.
Press ®
(Registration) button
Enter [#] button
Enter number
and
on the keypad
Press ®
(Registration) button
After a door is locked by the auto-lock function, please verify that the door is completely locked.
To Set Manual Locking Mode
Press ®
(Registration) button
Enter [#] button
*Factory default setting
Enter number
and
on the keypad
Press ®
(Registration) button
Operating Instructions
Auto/Manual Locking Mode
Do not to leave the door open in manual lock mode.
Volume Setting Feature
*Factory default setting: High
Press ®
(Registration) button
Enter [#] button
Press ®
(Registration) button
9
Operating Instructions
10
Open/Close Button Setting Feature
Outside Forced Lock Setting - PIN Code
This feature disables and enables the open/close button. The on/off status of the function changes every time
the setting is modified. When the system is set to ‘off’, the open/close button is disabled.
Press ® button
Enter [#] button
Enter number 2 and
4 on the keypad
Press ® button
The alarm sounds for 30 minutes or until it is reset.
The alarm can be reset by presenting the card key, or entering the User PIN code, or pushing and holding
the open/close button for 5 seconds.
Break in / Damage Alarm
Break in: When someone tries to break in by opening the door when it is locked, the alarm sounds.
Damage: When the front body is damaged due to forced separation or drilling, the alarm sounds.
Safety Features
Alarm Features
High Temperature Alarm
In the event of a fire, an audible alarm is triggered and the lock automatically retracts the
deadbolt. The High Temperature Alarm releases the deadbolt automatically even when the
inside Forced Lock mode is set.
11
Safety Features
3-Minute Lock Feature
If incorrect security codes or unregistered card keys are attempted 5 times in a row, the RITE Touch locks out
for 3 minutes with the blinking LED.
To Release 3-Minute Lock
Method 1
Press the Open/Close button.
Method 2
Press the ® Registration button.
Method 3
Open with the thumb turn by pressing both buttons and turning.
Open Door with Fake PIN Code
A fake PIN code may be used to prevent the User PIN code from being unintentionally exposed. It may be
used with the User code, not the One Time PIN code.
Method 1
Touch with palm
Press Any button
Method 2
Touch with palm
Press PIN Code
Press Pin Code
Touch with palm
Press Any button
Touch with palm
* 3-Minute Lock mode will not affect an alarm and is sustained even after the product is rebooted.
* Once 3-Minute Lock mode is initiated, the Fake PIN Code will not work until the next normal verification
(card key verification, User PIN code, or open door from inside). In this case, please open the door with User
PIN Code.
12
The Remote Control Module may be purchased separately from
Adams Rite. It may be installed in the back body of the RITE Touch
to activate the remote control feature.
Remote Control Module
Installing the Remote Control Module
1 Remove batteries
2 Install Remote Control Module
Open the battery cover
in the Back Body
and remove
all batteries.
Connect the
Remote Control Module
to the connector.
3 Insert batteries
4 Insert batteries
Note polarity of
batteries prior
to installation.
An audible tone
will signal
successful startup.
Optional Accessories
Remote Control Module
13
Optional Accessories
Remote Control
To Register Remote Control
Step
Icon
Description
1 Press ® (Registration)
button and #
Open the battery cover in the Back Body.
Press ® (Registration) button and then #.
2 Enter number 0 and 5
on the keypad
Enter number 0 and then 5 on keypad.
3 Register Remote
Control
Press the SET button on the Remote Control.
(Up to 5 Remote Controls may be registered)
4 Press ® (Registration)
button
Press the ® (Registration) button in the Back Body
again to complete the procedure.
Reset Remote Control
Step
14
Icon
Description
1 Press ® (Registration)
button and #
Open the battery cover in the Back Body.
Press ® (Registration) button and then #.
2 Enter number 7 and 5
on the keypad
Enter number 7 and then 5 on keypad.
3 Press ® (Registration)
Press the ® (Registration) button in the Back Body
again to complete the procedure.
Step
Icon
Description
1 Contact the 9V
Alkaline battery
Open the emergency cover. Hold the 9V alkaline
battery on the emergency power supply terminal
during the following steps.
2 Touch with palm
Touch the keypad gently with your palm.
3 Enter User PIN Code
Enter User PIN Code.
4 Touch with palm or
enter * button
Touch the keypad gently with your palm or enter
* button to confirm.
Emergency Power
Emergency Power Supply for Discharged Batteries
In the event of battery failure, the RITE Touch may be unlocked using a 9V battery.
Emergency Power Supply for Discharged Batteries
1 Expiration Period
The product uses four 1.5V Alkaline AA batteries. They should be effective for one year (based on 10 daily uses).
(Users are advised to use authentic alkaline batteries.)
2 Low Battery Alarm
All four batteries must be replaced in the following situations:
• The low battery indicator light is illuminated on the front body
• The alarm melody sounds (nursery rhyme ting-a-ling melodies)
The battery life varies depending on temperature, moisture levels,
frequency of use, and the quality of batteries.
15
www.adamsrite.com
800.872.3267
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement