User Manual - B&H Photo Video

User Manual - B&H Photo Video
VFD1028w
Digital Photo Frame
User Guide
Model No. VS14962
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
•
Warning: You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
For Canada
•
This Class B digital apparatus complies with Canadian ICES-003.
•Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive
2006/95/EC.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive
2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or
discarded batteries or accumulators as unsorted municipal waste, but use the return and collection
systems available.
If the batteries, accumulators and button cells included with this equipment, display the chemical
symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than
0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
2
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb)
0.1%
< 0.1%
Mercury (Hg)
0.1%
< 0.1%
Cadmium (Cd)
0.01%
< 0.01%
Hexavalent Chromium (Cr6+)
0.1%
< 0.1%
Polybrominated biphenyls (PBB)
0.1%
< 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1%
< 0.1%
Substance
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
3
Copyright Information
Copyright© ViewSonic Corporation, 2012. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
VFD1028w
ViewSonic Digital Photo Frame
Model Number:
VS14962
Document Number:
VFD1028w_UG_ENG Rev. 1A 09-04-12
Serial Number:
_____________________________
_____________________________
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
4
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Picture Frame.
This will reduce the risk of fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or
moisture.
Warning: To prevent the risk of electric shock, do not remove the cover. There are no
user-serviceable parts inside. Refer all servicing to qualified personnel.
• The Digital Picture Frame is for indoor use only.
• Unplug the Digital Picture Frame before performing care and maintenance.
• Do not block the ventilation holes on the back of the Digital Picture Frame at any
time.
• Keep your Digital Picture Frame out of direct sunlight and heat sources.
• Protect the power cord. Route power cord so that it is not likely to be walked on or
pinched by item places on or against it. Pay particular attention to the point where the
cord attaches to the Digital Picture Frame.
• Only use the AC adapter included with the Digital Picture Frame. Using any other
power adapter will void your warranty.
• Unplug the power cord from the outlet when the unit is not in use.
• Risk of explosion if battery replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Cleaning the LCD Screen
Touch the screen gently.
To clean fingerprints or dust from the LCD screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the
LCD screen. Clean the LCD screen with a cleaning cloth moistened with the liquid.
Cleaning the Digital Picture Frame
Clean the outer surface of the Digital Picture Frame (excluding the screen) with a soft
cloth dampened with water.
Package Content
Digital Picture Frame
Power Adapter
Stand
Remote Control
USB Cable
Quick Start Guide
User’s Manual
VFD1078w
Digital Photo Frame
User Guide
Model No. VS14962
v
Table of Contents
1. Hardware---------------------------------------------------------------------------- 1
1.1. Specifications------------------------------------------------------------------ 1
1.2. Identification of Controls---------------------------------------------------- 1
1.3. Accessories - ------------------------------------------------------------------ 2
1.4. Features------------------------------------------------------------------------- 2
1.5. Features Checklist------------------------------------------------------------ 3
1.6. Remote control---------------------------------------------------------------- 3
2. Main function---------------------------------------------------------------------- 4
2.1. Photo----------------------------------------------------------------------------- 5
2.1.1. Browse------------------------------------------------------------------ 6
2.1.2. Slideshow--------------------------------------------------------------- 6
2.2. Calendar------------------------------------------------------------------------ 7
2.2.1. Display Mode---------------------------------------------------------- 7
2.2.1.1. Monthly calendar------------------------------------------ 7
2.2.1.2. Calendar----------------------------------------------------- 8
2.2.1.3. Clock---------------------------------------------------------- 8
2.3. Settings-------------------------------------------------------------------------- 9
2.3.1. Photo Setting---------------------------------------------------------10
2.3.2. Calendar Setting-----------------------------------------------------10
2.3.3. System Setting------------------------------------------------------ 11
3. Troubleshooting-----------------------------------------------------------------12
Customer Support------------------------------------------------------------------13
Limited Warranty--------------------------------------------------------------------14
vi
1. Hardware
1.1. Specifications
LCD screen
Fhoto File
Panel size/ Aspect ratio
10.1 inch/ Wide
Effective viewing area
8.2” W x 4.1” H ( 208.3 mm x 104.1 mm)
Resolution
1024 x 600 pixels
Image formats supported
JPG, JPEG (baseline coding), BMP
Max. image resolution
30 million pixels
Calendar
Memory Medium
Electric Specification
Clock, Calendar
Internal
128 MB
Memory Card
MMC, SD, SDHC ( max. 32GB)
USB
USB flash drive
File System
FAT, FAT32
Power Input
5VDC, 1A
Power Consumption
≤ 5W
Power Adapter
Dimensions
Environmental
Requirements
Input
AC 100-240V, 50/60HZ
Output
DC5V , 1A
Dimensions
12.52”W x 8.7”H x 1.42”D (318 x 221 x 36 mm)
Weight
Approx. 2.03 lbs (917g)
Operating Mode
Buttons on panel and IR Remote
Operating temperature
0ºC ~ 40ºC (32ºF~104ºF)
Storage temperature
-20ºC ~ 60ºC (-4ºF~140ºF)
1.2. Identification of Controls
1. Power on/off
2. Right
3. Left
4. UP
5. DOWN
6. MENU
7. MMC/SD/MS
8. USB HOST
9. MINI USB
10. DC IN
11.Wall mount hole
1
1.3. Accessories
The following accessories are included with the digital photo frame.
Remote Control
AC/DC Adapter
USB Cable
Stand
1.4. Features
• Remote control and hard keypad control.
• Playback of photo stored on data storage devices through
High-Speed USB 2.0 port, card-reader port or the built-in
memory.
• Data storage devices: USB disk, SD, MS, MMC card.
• Multi-language OSD supports: English, French, Spanish.
• File format: JPG, BMP.
• Photo Play Sequence: sequence, random.
• Automatic slideshow with multiple transition effects and
adjustable display time.
• Supports calendar.
• Has screen saver function.
• 10.1 inch TFT LCD display, brightness, contrast and
saturation adjustable.
• Add and delete image on built-in memory.
2
1.5. Features Checklist
Remote control and keypad control
SD/MS/MMC
USB
Photo
10.1” TFT-LCD display
Built-in memory
Calendar
VFD1028w
√
√
√
√
√
√
√
1.6. Remote control
1: Power on/off
2: Play/Pause/Enter
3/4: Left/Backward
5/6: Up/Return
7: Time
8: Menu
9/10: Zoom/Down
11/12: Forward/Right
13: Setup menu
3
2. Main function
To attach the stand, screw in the stand clockwise until it is secure.
Insert an SD/SDHC/MMC or USB memory source device into an appropriate
memory slot. Connect the supplied power adapter to the photo frame and to an
electrical outlet.
The photo frame will power on automatically. Press “
manually.
4
” to power on and off
On the Main Menu, there are 【Photo】【 Calendar】【Setting 】.
This photo frame searches the memory source device after power on and
playback photos in slideshow mode if there are photos found. If there is no photo
found, the Main Menu will be shown.
2.1. Photo
Insert a memory card or USB flash drive with the photo on it into the photo frame
if you had not done so. Select【Photo】 from the main menu, press the ENTER
button, this photo frame will start slideshow automatically. Press MENU to
display photos in a thumbnail view.
The following button functions are available while viewing photos in thumbnail
and slideshow modes.
5
2.1.1. Browse
Buttons
Functional descriptions
Exit to thumbnail view
Previous photo
Next photo
--Toggle Browse and Slideshow modes
2.1.2. Slideshow
Buttons
Functional descriptions
Exit to thumbnail view
Previous photo
Next photo
--Toggle Browse and Slideshow modes
6
2.2. Calendar
Select【Calendar】from the main menu, press the ENTER button to view the
calendar. Monthly calendar mode is the default.
2.2.1. Display Mode
The date and time displayed on the calendar are the current date and time set in
the system.
2.2.1.1 Monthly calendar
In this mode, photos are shown in slideshow on the top right.
Buttons
Functional descriptions
Exit to the main menu
Previous photo
Next photo
Previous month
Next month
Toggle Monthly calendar, Calendar (day), and
Clock viewing modes
7
2.2.1.2 Calendar
In this mode, photos are shown in slideshow on the right.
Buttons
Functional descriptions
Exit to the main menu
Previous photo
Next photo
--Toggle Monthly calendar, Calendar (day), and
Clock viewing modes
2.2.1.3 Clock
In this mode, an analog clock is shown in the center.
8
Buttons
Functional descriptions
Exit to the main menu
--Toggle Monthly calendar, Calendar (day), and
Clock viewing modes
2.3. Settings
Select【Setup】from the main menu, press the “ENTER” button or press the
【SETUP】button on the remote control to enter the Settings Menu. The Photo,
Calendar, and System settings are shown below.
Press the Up【▲】or Down【▼】button to highlight a setting category, then
【ENTER】 button to enter the setup submenu.
Buttons
Functional descriptions
Exit to Main Setting Menu
Decrease the setting value
Increase the setting value
Move down or to the previous menu entry field
Move up or to the next menu entry field
Enter the setup submenu
9
2.3.1.Photo Setting
Press the Up【▲】or Down【▼】button to highlight Photo Setting, then
【ENTER】 button to enter the setup submenu. Press the Left【◄】or Right
【►】button to change the entry field. Press the Up【▲】or Down【▼】button
to move between entry fields.
Photo Setting Options
Functional descriptions
Display Mode
Photo startup modes: Slideshow, Thumbnail, or
Browse Mode
Set the display scaling: Fit to Screen, Crop to Fill,
or Full Screen
Set the duration time for slideshow: 5sec, 15 sec,
30 sec, 60 sec, 5 min, or 15 min
Repeat modes: Repeat (on) or Once (off)
Set the slide transition effects: Random, S-Curve,
Partition, Erase, Blind, Random line, Grid, Cross,
Spiral, Rectangle, or Close
Source settings: Current Directory or All Directories
Set playback modes: Sequential Order or Random
Display Ratio
Slideshow Duration
Slideshow Repeat
Slideshow Effect
PhotoFrom
Photo Play Sequence
2.3.2. Calendar Setting
Press the Up【▲】or Down【▼】button to highlight Calendar Setting, then
【ENTER】button to enter the setup submenu. Press the Left【◄】or Right
【►】button to change the entry field. Press the Up【▲】or Down【▼】button
to move between entry fields.
Calendar Setting Options
Functional descriptions
Display Mode
Set the calendar display modes: Monthly Calendar,
Calendar (day), or Clock
Set the current date
Set the clock display formats: 12 Hour or 24 Hour
Set the current time
Date
Clock Mode
Clock Time
10
2.3.3.System Setting
Press the Up【▲】or Down【▼】button to highlight System Setting, then
【ENTER】button to enter the setup submenu. Press the Left【◄】or Right
【►】button to change the entry field. Press the Up【▲】or Down【▼】button
to move between entry fields.
Photo Setting Options
Functional descriptions
Language
Brightness
Contrast
Saturation
Auto Power On
Auto Boot-Up Time
Auto Power Off
Auto Shutdown Time
Auto-Power Frequency
Set the display language
Adjust screen brightness: 1 to 16
Adjust the screen contrast: 1 to 16
Adjust the screen saturation: contrast: 1 to 16
Off is disable and On is enable
Set the time for the unit to power on automatically
Off is disable and On is enable
Set the time for the unit to power off automatically
How often you want the unit to use the timer after
the timer is enable. Available options are: Everyday,
Weekday, Weekend, and Once.
Restore the factory default settings
Displays version information
For firmware upgrade
Reset default setting
Version
System
11
3. Troubleshooting
Symptoms
Solutions
Cannot power on, even when
the device is connected to an
electrical outlet.
• Check whether the AC power adapter
rating is correct, and it is securely plugged
to the device and to an electrical outlet.
Failed to read memory card
• Check whether memory card is inserted
properly. The notch should match the label
on the device. Do not force the memory
card in
Cannot playback pictures
• The digital photo frame only supports
pictures in JPEG, JPG format in baseline
and BMP.
Screen is off or too dark
• Check whether the screen brightness is
set to a low level in the Setup menu.
12
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/
Region
Web Site
Australia/New
Zealand
www.viewsonic.com.au
Canada
www.viewsonic.com
Europe
www.viewsoniceurope.com
www.viewsoniceurope.com/uk/Support/Calldesk.htm
Hong Kong
www.hk.viewsonic.com
T= 852 3102 2900
[email protected]
India
www.in.viewsonic.com
T= 1800 11 9999
[email protected]
Ireland (Eire)
www.viewsoniceurope.com/
uk/
www.viewsoniceurope.com/uk/
support/call-desk/
[email protected]
com
Korea
www.kr.viewsonic.com
T= 080 333 2131
[email protected]
Latin America
(Argentina)
www.viewsonic.com/la/
T= 0800-4441185
[email protected]
Latin America
(Chile)
www.viewsonic.com/la/
T=1230-020-7975
[email protected]
Latin America
(Columbia)
www.viewsonic.com/la/
T= 01800-9-157235
[email protected]
Latin America
(Mexico)
www.viewsonic.com/la/
T= 001-8882328722
[email protected]
T=Telephone
F=Fax
AUS=1800 880 818
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
E-mail
[email protected]
[email protected]
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico
Latin America
(Peru)
www.viewsonic.com/la/
T= 0800-54565
[email protected]
Macau
www.hk.viewsonic.com
T= 853 2870 0303
[email protected]
Middle East
ap.viewsonic.com/me/
Contact your reseller
[email protected]
Puerto Rico &
Virgin Islands
www.viewsonic.com
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
[email protected]
[email protected]
Singapore/
Malaysia/
Thailand
www.viewsonic.com.sg
T= 65 6461 6044
[email protected]
South Africa
ap.viewsonic.com/za/
Contact your reseller
[email protected]
United
Kingdom
www.viewsoniceurope.com/
uk/
www.viewsoniceurope.com/uk/
support/call-desk/
[email protected]
viewsoniceurope.com
United States
www.viewsonic.com
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
[email protected]
13
Limited Warranty
VIEWSONIC Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer
purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a.Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b.Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power fluctuations or failure.
d.Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f.Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
refer to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4.3: ViewSonic DPF Warranty
DPF_LW01 Rev. 1A 06-20-08
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement