Quick Setup Guide
www.Advidia.com
Quick Setup Guide
Advidia
A-44 Dome Camera
Table of Contents
A.
Camera Physical Description ............................................................................................................ 3
B.
Installation......................................................................................................................................... 5
C.
Search and Modify IP ....................................................................................................................... 8
D.
Preview via Web Browser............................................................................................................... 11
Channel ParametersDisplaySetting ........................................................................................... 14
Channel ParametersVideo Settings............................................................................................ 15
Channel ParametersMotion Detection Setting........................................................................... 16
Channel ParametersText Overlay Setting .................................................................................. 16
Channel ParametersFront Para Config ...................................................................................... 17
Network ParametersNetwork Setting ........................................................................................ 17
Network ParametersNTP Setting............................................................................................... 18
Network ParametersE-mail Setting ........................................................................................... 18
Alarm ParametersAlarm Input Setting ...................................................................................... 19
Alarm ParametersAlarm Output Setting .................................................................................... 19
Alarm Deployment Time ............................................................................................................... 19
User Management .......................................................................................................................... 20
Add User ............................................................................................................................................. 20
Modify User ........................................................................................................................................ 20
F.
Adding Camera to Monitor Station................................................................................................. 21
4/10/2012
Page 2
Advidia
A-44 Dome Camera
A. Camera Physical Description
Serial
NO.
Description
1
10M/100M self-adaptive Ethernet interface
2
INITIAL SET: Reset the camera
3
AUDIO OUT: Audio output interface
4
MIC IN: Audio input interface
5
D+, D-: RS-485 interface
6
1A, 1B, 2A, 2B: Alarm output interface
7
IN1, GND, IN2, GND: Alarm input interface
8
Power supply
Camera Reset: When the camera is powered up, press the ‘INITIAL SET’ button for about 10
seconds then all parameters, including user name, password, IP address, port number, etc., will
be reset to the factory default settings.
4/10/2012
Page 3
Advidia
4/10/2012
A-44 Dome Camera
Page 4
Advidia
A-44 Dome Camera
B. Installation
Note:





Please check if all the items on the package list have been included with your camera.
Read the following contents carefully before the installation.
Make sure that all the related equipment is power-off during the installation.
Check the power supply to prevent any damage caused by mismatching problems.
Do not place the camera in extremely hot or damp environment. To avoid heat
accumulation, good ventilation is required for a proper operating environment.
 If the product does not operate properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Users are
responsible for any problem caused by modification or repairing without authorization.
The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:
Note:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back box
and then feed cables through the opening
to secure on the ceiling.
Step 1: Use the screws to fix the bottom plate on the ceiling, and rotate dome camera
counterclockwise to attach it to the bottom plate, and finally use the lock screw to secure the
dome camera.
4/10/2012
Page 5
Advidia
A-44 Dome Camera
Step 2: Loosen the set screws with a hexagonal screw driver (attached with the camera), and
take down the dome cover.
Step 3: While viewing the video on the monitor, adjust the camera’s view angle for your need.
4/10/2012
Page 6
Advidia
A-44 Dome Camera
Step 4: Install the dome cover and tighten the screws.
4/10/2012
Page 7
Advidia
A-44 Dome Camera
C. Search and Modify IP
SADP (Search Active Devices Protocol) software can automatically search the IP address of
network cameras in the same local area network (LAN) with connection diagram as following:
4/10/2012
Page 8
Advidia
A-44 Dome Camera
The operation of searching and modifying IP address is described as following:
1. Install the SADP software, and then run the
“sadpdlg.exe”.
2. Search IP address
4/10/2012
Page 9
Advidia
A-44 Dome Camera
3. Modify IP address.
4/10/2012
Page 10
Advidia
A-44 Dome Camera
D. Preview via Web Browser
Note: The default IP of network cameras is ‘192.0.0.64’ with ‘admin’ as the administrator,
‘12345’ as the password, and ‘8000’ as the default port.
For monitoring camera images, a computer running the Microsoft Windows Operating System
and Internet Explorer (Version 6.0 or later) are required. In this manual, we take Windows XP
and IE 6.0 for example.
1. Open the IE browser, set the security level to [Medium] in
[Tools/InternetOptions/Security/Custom Level…]
4/10/2012
Page 11
Advidia
A-44 Dome Camera
2. Input the IP address of the camera and press [Enter], and then click the dialog box that pops
up.
3. Click [Run] to install the ActiveX control.
4/10/2012
Page 12
Advidia
A-44 Dome Camera
4. Input “Username” (Default: admin), “Password” (Default: 12345) and “Port” (Default: 8000)
of the camera, then click [Login]
5. View the image
4/10/2012
Page 13
Advidia
A-44 Dome Camera
E. Web Interface Configuration
Channel ParametersDisplaySetting
According to different
requirements, enable the display
of Date&Time and Week by
clicking the checkbox.
Different date formats can be
selected.
There are two Time format: 24
hour and 12 hour.
The OSD Status can be set to
transparent & flickering,
transparent & un-flickering, nontransparent & flickering, or nontransparent & un-flickering.
4/10/2012
Page 14
Advidia
A-44 Dome Camera
Channel ParametersVideo Settings
Parameter
Description
Channel Name
Input the channel name for your need
Encode Parameters
4/10/2012
Main stream or Sub stream optional
Stream Type
Video&Audio or Video optional
Resolution
Select the resolution for your need
Image Quality
Highest, Higher, Medium, Low, Lower or Lowest optional
Bitrate Type
Constant bitrate or Variable bitrate optional
Max. Bitrate
Select or customize a bitrate according to the resolution
Frame Rate
Select the frame rate for your need
Multicast Address
Set the multicast address, with the default multicast of
0.0.0.0
RTSP Port
Set the RTSP port, with the default RTSP port of 554
Page 15
Advidia
A-44 Dome Camera
Video Encode Type
Select the video encode type for your need
Channel ParametersMotion
Detection Setting
Select the checkbox of Enable motion
detection to enable this function.
Zone Settings:Click Start draw
button to draw motion detection zone
by clicking and dragging the mouse
in the live video image.
User is allowed to draw multiple
motion detection zones in the same
picture. When all zones have been
set, click Stop draw to finish drawing.
Sensitivity:The sensitivity level can be set to 0, 1, 2, 3, 4 and 5. When it is set to 0, the sensitivity is
disabled.
Linkage:The Linkage method can be selected to either Email link, Trigger recording or Trigger alarm
output.
Click "Save" button to save the
modified parameters.
Channel ParametersText
Overlay Setting
Input the characters in the Text
Information box and define the OSD
location in the image by setting the
XPosition and YPosition, and then
select the checkbox of OSD Text.
After clicking Save to finish the
settings, the defined title will be
displayed on the image.
Note: The values of XPosition and
YPositon are relative to the upper left corner origin of the image.
4/10/2012
Page 16
Advidia
A-44 Dome Camera
Channel ParametersFront Para Config
In this page, user can adjust the
parameters like brightness, contrast,
saturation, sharpness, etc.
Shutter: User can set the shutter time
according to the different camera
models.
IrisMode:There are two modes:
IrisFirst and manual optional.
Power Mode:There are two modes:
50Hz and 60Hz optional.
Network ParametersNetwork Setting
Set the NIC Type, IP Address, Subnet
Mask, Gateway and DNS Server of the
network camera.
Click "Save" button to save the
modified parameters.
Note: Please reboot the network camera
to validate the modified parameters.
4/10/2012
Page 17
Advidia
A-44 Dome Camera
Network ParametersNTP Setting
Click the checkbox of Enable NTP
to enable this function. Input the
Server Address and Port of NTP.
If the public network is applied,
please input the NTP Server
Address with provision of time
sync service, e.g., 210.72.145.44.
In the private network is applied,
the NTP software can be used to
establish NTP server to achieve
time synchronization.
Click "Save" button to save the
modified parameters.
Note: Please reboot the network camera to validate the modified parameters.
Network ParametersE-mail Setting
Through E-mail settings, the alarm
message can be sent to the
designated E-mail address when
alarm event occurs.
Input the SMTP server, SMTP port,
user name, password, E-mail sender
and receiver.
Click "Save" button to save the
modified parameters.
Note: Please reboot the network
camera to validate the modified
parameters.
4/10/2012
Page 18
Advidia
A-44 Dome Camera
Alarm ParametersAlarm Input Setting
Set the type of Relay Status to NC or
NO.
Note: Please reboot the network
camera to validate the modified
parameters.
The Linkage can be selected to E-mail
link, Trigger alarm output or Trigger
recording.
Click "Save" button to save the
modified parameters.
Alarm ParametersAlarm Output Setting
The Output Delay refers to the length of
time that the relay remains in effect
after alarm occurs. The output delay
time can be set to 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min or Manual
(manually disable).
Click "Save" button to save the
modified parameters.
Alarm Deployment Time
The Deployment time can be set to
several days a week or to all week,
with only four period configurable for
each day.
Note: The alarm deployment time
setting is valid only when the camera
has already been configured with the
motion detection, alarm input and
alarm output functions.
Click "Save" button to save the
modified parameters.
4/10/2012
Page 19
Advidia
A-44 Dome Camera
User Management
When the current login user is admin, it is allowed to create other users. Up to 15 users can be
created.
Add User
Click Add to enter the
settings interface as shown
here.
Input the user name,
password, IP address, MAC
address, and then select user
type. Finally, click OK to
finish the user addition.
Modify User
Click Modify to enter the
settings interface as shown
here.
It is allowed to modify the user
name, password, IP address,
MAC address, and then select
user type. Finally, click OK to
finish the user modification.
Note: Only the password of the user admin can be modified.
4/10/2012
Page 20
Advidia
A-44 Dome Camera
F. Adding Camera to Monitor Station
Using Auto discovery, enter the default credentials described above and click Start.
Using Manual add on, choose to add a camera and select the following from the dropdown:
4/10/2012
Page 21
Advidia
4/10/2012
A-44 Dome Camera
Page 22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement