Manual - Inter
Bluetooth Speaker M7
User Manual
Bluetooth Speaker M7
Introduction .......................................................... 1
Overview ............................................................... 1
User interface of M7 Speaker: .............................. 2
Technical specification: ......................................... 2
Pair/connect M7 speaker to Bluetooth device ..... 3
Call handling .......................................................... 3
Volume control ..................................................... 4
Line in port ............................................................ 4
Package content .................................................... 4
Care and maintenance .......................................... 4
Disposal of waste .................................................. 4
Contact: ................................................................. 5
Bluetooth Speaker M7
User Manual
Introduction
Thank you for purchasing Nitrox M7 Bluetooth speaker. Its compact design will
bring you ultra-portability and amazingly to deliver powerful bass impressive
sound, so enjoy the world of power rhythm and harmony. This manual will
assist you to operate M7 speaker in a quicker and proper way. Please read it
through before using the speaker.
The inobservance of this manual can cause damages which will be out of
warranty.
Overview
M7 speaker works with Bluetooth technology to connect Bluetooth devices,
such as mobile phone, music players, notebooks, which enable you to:
Wirelessly listen music ultra bass and clear sound.
Handle phone calls securely and safely on driving.
Bluetooth Speaker M7
User interface of M7 Speaker:
Bluetooth Speaker M7
Technical specification:
Product Name
Bluetooth Speaker M7
Bluetooth specification
Version 3.0 ‖
Frequency Response
100Hz-20KHz
Charging Time
3 hours
Speaker Output
3W
Battery Capacity
650mAh
Charging/Pairing/Connecting
Please follow the coming three steps before using M7 speaker:
1)
Charge M7 speaker
2)
Plug one end of the USB cord to a 5V USB power adapter or
computer/notebook device and the other end to M7 speaker.
3)
While charging, LED is red; when it turned blue, then the speaker
is fully charged.
Note:
- When the LED flashes with beep, it indicates the battery level is low, so
please charge it.
- Charging in a -20 to +50℃
- Charging time: About 3 hours.
Bluetooth Speaker M7
Pair/connect M7 speaker to Bluetooth device
1)
Power on M7 speaker, the speaker will automatically reconnect to last
“paired” Bluetooth device.
2)
First time using M7 or the last paired Bluetooth device is not existed or
not within effective range(10 meter).
a)
Enable Bluetooth function on your phone or the other device.
b)
Search for new Bluetooth device until “Tweakers Bread” appears
in the searched Bluetooth device list on your phone/device.
c)
Select “Tweakers Bread”
d)
Enter pass code “0000”to pair(if required)and connect M7 speaker
to your device.
Note: M7 speaker LED will turn off if no Bluetooth device connected within 5
minutes.
Call handling
When you receive a call, you hear a ringing tone from the speaker.
To answer the call, press the answer key lightly.
To reject an incoming call, press and hold the answer key for 2 to 3 seconds
until you hear a beep and let go.
To end a call, press the answer key lightly, or wait for the other party to hang
Bluetooth Speaker M7
up.
Volume control
Short press “+” is change to next song, and long press “+” is volume up.
Short press “-“ is change to last song, and long press “-“ is volume down.
Line in port
If there’s no Bluetooth function on your phone or music player devices, you can
connect device by audio cable.
Package content
Bluetooth speaker, user manual, USB cable, Audio cable.
Care and maintenance
1)
Keep all accessories out of the reach of children.
2)
Keep the device dry. Liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet, allow it to dry
completely.
3)
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components will be damaged.
4)
Do not store the device in hot areas. High temperatures can shorten the
Bluetooth Speaker M7
life of electronic devices, damage batteries, and warp or melt certain
plastics.
5)
Do not store the device in cold areas. Usually, when returns to normal
temperature, moisture can damage electronic circuit boards.
6)
Do not attempt to open the device.
7)
Do not drop, knock, or shake the device. Rough handling my break circuit
boards and its mechanism.
8)
Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the device.
9)
Do not paint the device. Paint can clog the moving parts and may cause
function ineffective.
Disposal of waste
If you want to or have to change your device, please don´t clean it up by
normal garbage. Please use the special collection points for electronic waste.
Please ask your local government for the right way of disposal of electronic
waste.
Bluetooth Speaker M7
Contact:
Nitrox is a trading mark of Inter-Tech Elektronik Handels GmbH
Hainhäuser Weg 93, D-30855, Langenhagen, Deutschland
Telephone: +49 (0)511 726678-30
Email: [email protected]
Web: www.inter-tech.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement