Radiodetection RD7000+ cable and pipe locators, RD7000+ Tx-1, Tx-3, Tx-10 transmitter Operation manual

Below you will find brief information for cable and pipe locators RD7000+, transmitter RD7000+ Tx-1, transmitter RD7000+ Tx-3 and transmitter RD7000+ Tx-10. RD7000+ cable and pipe locators are designed to quickly and effectively locate and map buried utilities, using the latest technology in a powerful, ergonomic, lightweight design. RD7000+ locators can detect a variety of frequencies and offer features like TruDepth for automatic depth measurements and StrikeAlert for warnings about shallow targets. The compatible RD7000+ transmitters send signals to buried conductors to aid in their location. You can adjust transmitter power output for different conditions and select frequencies using the on-screen menu. The RD7000+ series comes with a one-year warranty that can be extended to three years by registering each product.

PDF Download
Document
RD7000+ Operation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Locate buried utilities
  • TruDepth depth measurement
  • StrikeAlert shallow target warning
  • Adjustable transmitter power output
  • Various frequency options
  • Ergonomic and lightweight design
  • Extended warranty option

Frequently asked questions

SideStepauto™ is a feature on the transmitter that allows it to calculate the optimum frequency based on ground impedance and optimize the active frequency for better locate accuracy and battery life.

To replace the batteries on the locator, unlatch the battery compartment cover and lower the tray. Remove the spent batteries and insert two D-Cell Alkaline or Ni-Cad batteries. To replace the batteries on the transmitter, unlatch the accessory tray and remove the spent batteries from the compartment under the transmitter body. Insert eight D-cell (LR20) Alkaline or Ni-Cad batteries.

The RD7000+ supports three antenna modes: Peak mode, Null mode (TL and PL models only), and Combined Peak/Null mode.
Preparing document for printing…
0%