Data Sheet

Test Equipment

NEW! 5Mhz Function Generator with Frequency Counter

Engineers, Technicians,

Electricians,

Maintenance,

Manufacturing, Quality

Control & Educators can all use the 4005 in confidence with its exceptional quality, rugged design & housed in high impact case with convent multiple-position handle.

Model 4005

Features:

4 product in one low cost package

Function generator, multiple waveforms

Sweep generator, wide sweep range

Pulse generator, great accuracy

Frequency counter, 2Hz to 50Mhz with auto range

6 digit seven segment, eye pleasing green LED display

Display indicates, gate time, MHz,

KHz, Hz, mHz

The 4005 is designed to be used, not only as a function generator, but also as a sweep generator, pulse generator and a frequency counter.

The VCF (voltage controlled frequency) produces precision sine, square and triangle waves over the 0.05Hz to 5MHz for sub-audible, audio, ultrasonic and RF applications. A continuously variable DC offset allows the output to be injected directly into circuits at the correct bias level. Variable symmetry of the output waveforms converts the instrument to a pulse generator capable of generating rectangular waves or pulses, ramp or sawtooth waves and skewed sine waves of variable duty cycle.

The sweep generator offers linear sweep with variable sweep rate and sweep width up to 100:1 frequency change. The frequency response of any active or passive device up to 5 MHz can be determined.

The new Model 4005 is a great product for use in a wide range of applications in both analog and digital electronics such as engineering, manufacturing, servicing, maintenance, education and hobbyist

Innovative Training Solutions www.globalspecialties.com

Test Equipment

NEW! 5Mhz Function Generator with Frequency Counter

=

Specifications

Model

OUTPUT CHARACTERISTICS

4005

Waveforms

Sine, Square, Triangle, Skewed Sine, Pulse, Ramp Sawtooth,

TTL/CMOS Leveled Square, DC

Frequency Range 0.05Hz to 5MHz in 7 Ranges (5, 50, 500, 5k, 50k, 500k, 5M)

Frequency Accuracy ± 2% 2% (5, 50, 500, 5K, 50K, 500K, 5MHz Range, Full Scale)

Output Level: Sine &

Triangle wave

20 Vpp in open circuit, 10 Vpp into 50 Load

Square Wave 19 Vpp in open circuit, 9.5 Vpp into 50 Load

Output Impedance 50 ±5%

Attenuator -20 dB fixed and continuously variable (more than –20dB)

WAVEFORM CHARACTERISTICS

Sine wave -Flatness ± 3dB to 5 MHz (more than 14Vpp)

Distortion Less than 1% at 10 Hz to 100 KHz

Square wave -Rise and

Fall Time

Less than 25 nS (at 5MHz)

Triangle wave -Linearity More than 99% at 0.5 Hz to 100 KHz

TTL Output -Rise and

Fall Time

Less than 30 nS (at 1MHz)

Output Level TTL Level (H >/_2.4V, L </_0.4V)

CMOS Output -Rise and

Fall Time

Less than 180 nS (at 1MHz)

Output Level 4V to 15V ± 2V, Variable

DUTY RATIO 1:1 to 10:1

SWEEP FUNCTION CHARACTERISTICS

Mode Linear

Width Variable from 1:1 to 100:1

Rate 0.5 Hz to 50 Hz (20 mS to 2 S)

External VCF Input Input Voltage: 0 to 10 V

Input Impedance Approx. 1 K

Innovative Training Solutions www.globalspecialties.com

Test Equipment

NEW! 5Mhz Function Generator with Frequency Counter

Specifications

Model 4005

FREQUENCY COUNTER CHARACTERISTICS

Display

6 Digit Seven Segment – Green LED, Gate time, MHz,

KHz, Hz and mHz

Frequency Range 2Hz to 50 MHz with Auto Range

Accuracy ±Time base Error ± 1 count

Time base 10 MHz Crystal Oscillator, ±20ppm

Input Sensitivity 200 mVrms (2Hz ~100Hz), 100mV rms (100Hz~50MHz)

Input Impedance 50

Max. Input Voltage 250 Vpp

PHYSICAL CHARACTERISICS

Dimensions WHD 3.4 x 3.5 x 10.6” (240 x 90 x 270mm)

Weight Approx. 5.5 lb (2.5 k)

Equipment Ratings

Plug and Socket 3 wire AC power plug and 3 wire outlet

Power & Fuse Ratings

Input Voltage: Fuse Power Max

103 126V AC F 0.5A / 250V 15 W

(50/60Hz)

206 252V AC (50/60Hz) F 0.2A / 250V

Operating Environment

Temperature 0 °C to + 40 °C (Accuracy Specified at 23°C ± 5 °C)

Humidity up to 85% to 40°C without temperature extremes which may cause condensation within the instrument.

Storage Environment

Temperature -20°C to +70°C

Humidity below 85% RH

Overvoltage Category CAT II

Insulation Category II Portable equipment

Pollution Degree 2

Protection to IEC 529 Ordinary

Note: Specifications are subject to change without notice. Please visit www.globalspecialties.com for the most current product information

Supplied Accessories

User’s Manual --------------------------------------------------------------------------- 1

BNC Cable ------------------------------------------------------------------------------ 1

Power Cord ------------------------------------------------------------------------------ 1

Spare Fuse ------------------------------------------------------------------------------- 1

Innovative Training Solutions www.globalspecialties.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Global Specialties

:

4005