Robot Coupe Mini MP 240 V.V. Operating instructions

Robot Coupe Mini MP 240 V.V. Operating instructions
Mini MP 160 V.V.
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi
OPERATING INSTRUCTIONS
We reserve the right to alter at any time without notice the technical specifications of this appliance.
None of the information contained in this document is of a contractual nature. Modifications may be made at any time.
© All rights reserved for all countries by: ROBOT-COUPE s.n.c.
1
SUMMARY
WARRANTY
IMPORTANT WARNING
YOU HAVE JUST PURCHASED
A MINI POWER MIXER
SWITCHING ON THE APPLIANCE
• Advice on electrical connections
OPERATING THE APPLIANCE
• Starting and stopping the power mixer
• Variable-speed operation
WORKING POSITION
ASSEMBLING / DISMANTLING
USES & EXAMPLES
HYGIENE
CLEANING
• Motor unit
• Foot and bell
MAINTENANCE
• Blade
• Whisk
• Foot seal
TECHNICAL SPECIFICATIONS
• Weight
• Dimensions
• Working height
• Noise level
• Electrical data
SAFETY
PROBLEMS
STANDARDS
TECHNICAL DATA (Page 13)
• Blade and emulsifying disc
• Exploded views
• Whisk
• Electrical and wiring diagrams
3
ROBOT-COUPE S.N.C., LIMITED WARRANTY
Your new ROBOT-COUPE appliance
is warranted to the original buyer
for a period of one year from the
date of sale if you bought it from
ROBOT-COUPE S.N.C.
If you bought your ROBOT-COUPE
product from a distributor your
product is covered by your distributor’s warranty (Please check
with your distributor terms and
conditions of the warranty).
The ROBOT-COUPE S.N.C. limited
warranty is against defects in
material and/or workmanship.
THE FOLLOWING ARE NOT
COVERED BY THE ROBOT-COUPE
S.N.C. WARRANTY:
1 -
Damage caused by abuse, misuse,
dropping, or other similar damage caused by
or resulting from failure to follow assembly,
operating, cleaning, user maintenance or
storage instructions.
4
2 - Labour to sharpen and/ or replacements for
blades which have become blunt, chipped or
worn after a normal or excessive period of use.
3 -
Materials or labour to replace or repair
scratched, stained, chipped, pitted, dented or
discoloured surfaces, blades, knives, attachments
or accessories.
4 - Any alteration, addition or repair that has
not been carried out by the company or an
approved service agency.
5 -
Transportation of the appliance to or from
an approved service agency.
6 - Labour charges to install or test new attachments or accessories (i.e., bowls, discs, blades,
attachments) which have been arbitrarity replaced.
7 - The cost of changing direction-of-rotation of
electric motors (Installer is responsible).
8 - SHIPPING DAMAGES. Visible and latent
defects are the responsibility of the freight
carrier. The consignee must inform the carrier
and consignor immediately, or upon discovery in
the case of latent defects.
KEEP ALL ORIGINAL CONTAINERS AND
PACKING MATERIALS FOR CARRIER INSPECTION.
Neither ROBOT-COUPE S.N.C. nor its affiliated
companies or any of its distributors, directors,
agents, employees, or insurers will be liable for
indirect damage, losses, or expenses linked to
the appliance or the inability to use it.
The ROBOT-COUPE S.N.C. warranty
is given expressly and in lieu of all
other warranties, expressed or
implied, for merchantability and
for fitness toward a particular purpose and constitutes the only warranty made by ROBOT-COUPE
S.N.C. France.
IMPORTANT WARNING
WA R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
WARNING : In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse
of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to
know your appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that
anyone else who may use the appliance also reads them beforehand.
USE
UNPACKING
• WARNING - some of the tools are very sharp e.g.
blades, etc..
INSTALLATION
• We recommend that you install your appliance on
its wall frame.
CONNECTION
• Always check that your mains supply corresponds
to that indicated on the identification plate on the
motor unit and that it can withstand the amperage.
• Never plug your appliance into the mains supply
before placing it inside the preparation bowl.
HANDLING
• Always take care when handling the blades, as
they are extremely sharp.
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 7) and make sure that all the attachments
are correctly positioned.
CLEANING
• As a precaution, always unplug your appliance
• Never try to override the safety systems
before cleaning it.
• Never insert an object into the preparation.
• Always clean the appliance and its attachments at
• Never switch the appliance on unless it has been the end of each cycle.
• Never immerse the motor unit in water.
placed in the preparation bowl.
• Before dismantling the foot, bell or whisk always • For parts made from aluminum, use cleaning
fluids intended for aluminum.
check that the power mixer is unplugged.
• For plastic parts , do not use detergents that are
• We recommend that you tilt the appliance at
too alkaline (e.g., containing too much caustic soda
a slight angle to prevent the bell from touching the or ammonia).
• Robot-Coupe can in no way be held responsible for
bottom of the container.
the user’s failure to follow the basic rules of cleaning
and hygiene.
WA R N I N G
Procedure to follow if the stick blender is accidentally
immersed during use.
1) Do not touch either the power mixer, the bowl or the
work surface.
2) Unplug the mixer’s power cord from the wall socket.
3) Remove the power mixer from the preparation.
4) Tilt the power mixer to drain off as much liquid as
possible.
5) Do not switch the power mixer back on, as there is
still a risk of electrocution.
6) Send the power mixer to a Robot-Coupe approved
after-sales service to have the electrical components
cleaned and dried.
MAINTENANCE
• Before opening the motor housing, it is absolutely
vital to unplug the appliance.
• Check the seals and washers regularly and ensure
that the safety devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain ingredients contain
corrosive agents, e.g. citric acid.
• Never operate the appliance if the power cord
or plug has been damaged or if the appliance fails
to work properly or has been damaged in any way.
• Do not hesitate to contact your local Maintenance
Service if something appears to be wrong.
5
YOU HAVE JUST PURCHASED
A MINI POWER MIXER
The new Mini MP 160 V.V., Mini MP 190 V.V., Mini
MP 240 V.V., Mini MP 190 Combi and Mini MP 240
Combi models are the latest additions to RobotCoupe’s range of power mixer. They have been specially designed for processing smaller quantities.
They are fitted with a foot, blades and an emulsifying disc which can be entirely dismantled, and
their tubes measure 160, 190 and 240 mm long
respectively.
Models
Mini MP 160 V.V.
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi
Speed
variation
•
•
•
•
•
Mixer
attachment
Whisk
attachment
160 mm
SWITCHING ON
THE APPLIANCE
• ADVICE ON ELECTRICAL CONNECTIONS
190 mm
240 mm
190 mm
185 mm
240 mm
185 mm
These power mixer are tools which are totally adapted
to the needs of professionals. They will enable you to
make soups, vegetables purées and cereal preparations without any effort.
The whisk function is ideal for making pancake batter,
mayonnaise, beaten egg whites, chocolate mousse,
butter sauces, whipped cream or smooth fromage
frais.
The whisk is composed with a metallic gear box
even more resistant when processing pan cakes or
mashed potatoes.
The variable-speed function will enable you to
adjust the speed to suit each preparation and to start
the processing at a lower speed in order to reduce
splashing.
6
Each power mixer is supplied with a wall support
for easy storage.
The simple design of these appliances allows the
assembly and dismantling of the moving parts in no
time at all, to ease maintenance and cleaning.
These instructions contain important information that
will enable you to extract the greatest return on your
investment.
We therefore strongly advise you to read these
instructions carefully before using the appliance.
This class II appliance (double insulation) requires a
single-phase alternating current but does not need
an earthed socket. The universal-type motor is fitted
with an interference suppressor.
The power supply must be protected by a
differential circuit breaker and a 10 A fuse.
Check that you have a standard 10/16 A
single-phase socket.
Make sure that the voltage of your power supply
matches that shown on the identification plate of
your appliance.
Robot-Coupe supplies these models with different
types of motors:
230 V / 50 Hz for power supplies of:
220 V to 240 V.
120 V / 60 Hz
220 V / 60 Hz
The power mixer is supplied with a single-phase
plug connected to a power cord.
OPERATING THE APPLIANCE
• STARTING AND STOPPING
1. Plug your appliance into
the mains, making sure you
do not press the button
(BC).
2. Insert the foot into the
preparation.
3. Press the control button
(BC), and the power mixer
will start up.
4. To stop the power mixer,
release the control button
(BC).
• VARIABLE-SPEED OPERATION
Follow steps 1 to 4 above, then:
5. Change the speed of the motor by turning the
variable speed button (MV) towards the maximum
or minimum as required.
Whisk function (Mini MP 190 Combi, Mini MP 240
Combi): speed between 350 and 1 560 rpm.
For making mashed potatoes, you need to process at
low speed for a good quality result.
Mixer function (Mini MP 160 V.V., Mini MP 190 V.V.,
Mini MP 240 V.V., Mini MP 190 Combi, Mini MP
240 Combi): speed between 2 000 and 12 500 rpm.
It is advisable to start at a low speed when using the
whisk.
With the self-regulating speed system, once you
have selected a speed, it will remain constant, even
if the consistency of your mixture changes.
WORKING POSITION
For a more ergonomic
approach, we recommend
that you hold the handle of
the appliance in one hand
and the container in the other.
It is a good idea to lean forward slightly, making sure
that the bell does not touch
the bottom of the container.
touching the sides of the bowl. For maximum Attaching the bell to the tube
efficiency, at least one-fifth of the whisk length should
- Check that the machine is not plugged in.
be immersed. We also strongly advise you to start
- Insert the threaded section A into the housing B
the processing at a low speed.
of the bell. Turn the bell in the direction of the arrow
ASSEMBLING/
DISMANTLING
(see drawing) until it starts to tighten.
TURN TO ATTACH BELL
• BLADE FUNCTION
Always make sure that the bell is sufficiently immersed Attaching the tube to the motor unit.
to avoid splashing and that the air vents of the motor - Check that the appliance is not plugged in.
unit does not come into contact with any liquid.
- Insert the threaded section A right into the
For optimum efficiency, two thirds of the foot should
housing B of the motor unit.
Mini MP 190 V.V.
be immersed in the preparation.
Mini MP 190 Combi
- Turn the tube in the direction of the arrow (see
Mini MP 240 V.V.
• WHISK FUNCTION
figure) until it is locked into place moderately
Mini MP 240 Combi
tightly.
You can also hold the
Removing the bell from the foot
appliance by the handle
with one hand, leaving the
- Check that the machine is not plugged in.
other hand free to hold the
- Turn the bell in the direction of the arrow (see
bowl, if necessary.
drawing) to detach it from the tube.
TURN TO REMOVE BELL
While you process the preparation, we recommend
that you move the whisks
around in the bowl, in order
to ensure that the mixture is
completely homogeneous.
We strongly advise you to
keep the whisks from
Mini MP 160 V.V.
Mini MP 190 V.V.
Mini MP 240 V.V.
Removing the tube from the motor unit
- Check that the appliance is unplugged.
- Turn the tube in the opposite direction to when you
assembled it until it is completely unscrewed.
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
7
Removing the blade
• WHISK FUNCTION
Installing the emulsifying disc
(Mini MP 190 Combi and Mini MP 240 Combi)
- In order to install it safely, introduce the disc into
- To remove the blade safely, hold them with the tool
the bell, then hold it in place using the locking Attaching the gear box to the motor unit.
provided or an oven glove or a thick cloth.
tool.
- Check that the machine is not plugged in.
Next, turn the drive coupling with this tool until it
- Using the removal tool, unscrew the drive
- Align the flat side A of the conical part of the
starts to tighten.
coupling.
gear box with the catch B on the inside of the
Removing the emulsifying disc
aluminium casing.
- As soon as the drive coupling has been unscrewed, - The disc can be removed in exactly the same way
Turn the gear box in the direction of the arrow
as the blades.
the blade can be removed for cleaning.
(see figure) until it is locked into place moderately
tightly.
BLADE LOCKING
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
SOLID EMULSIFYING DISC
BELL
BELL
REMOVAL
REMOVAL
DIRECTION
DIRECTION
DRIVE COUPLING
BLADE
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
DRIVE COUPLING
REMOVAL
BLADE
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
BLADE LOCKING
REMOVAL
Removing the casing
BLADE LOCKING
- Check that the machine is not plugged in.
- Turn the gear box in the opposite direction to that
used when attaching it.
EMULSIFYING DISC
BLADE
FOOT
FOOT
Mini MP 160 V.V.
Mini MP 160 V.V.
Fitting the whisks into the gear box
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
the shaft
BLADE
REMOVAL
BLADE
REMOVAL
A
into the bore
B
of the gear box
drive shaft. Make sure the drive lugs
properly aligned with the notches.
8
D
are
- As you push the whisk into the gear box drive
shaft
C
, rotate it slightly in order to slot the drive
lugs into the notches
E
of the drive shaft
C
,
thereby locking the whisk into place inside the
shaft.
- To check that the whisk is properly fixed inside the
shaft
C
The foot, the blades, Emulsifying disc and the
whisks can be entirely dismantled, (RobotCoupe’s exclusive patented system), thereby
ensuring easy cleaning, perfect hygiene and
simple maintenance.
USES & EXAMPLES
, gently tug the metal wires.
The mixer function carries out all types of mixing in
- Repeat this procedure with the second whisk. If small quantities in a minimum of time, and we thus
you cannot push it in properly, remove it, rotate it recommend you to supervise carefully all food
preparations in order to obtain the best results.
90° and start again.
CATERING AND RESTAURANT WORK
• Soups, creamed soups
• Vegetable purees : carrots, spinach, celery,
turnips, French beans, potatoes etc.
• Mousses : vegetable, fish
• Fruit compotes
• Sauces : green, rouille, remoulade, cream
emulsions, tomato or parsley
• Bisques : langoustines and shellfish
• Pancake batter
• Chocolate mousse, butter cream, Whipped cream
• Cheese soufflé
HYGIENE
Removing the whisks from the gear box
Pull the ejector A in
direction to the arrow,
gripping the ejector
in one hand and the
holder B in the other.
- Dilute the detergent/disinfectant following the
manufacturer’s instructions on the label.
- Scrub well if necessary.
- Leave the disinfectant/detergent to take effect if
necessary.
- Rinse thoroughly.
- Dry properly using a clean cloth.
CLEANING
W A R N I N G
As a precaution, always unplug your appliance
before cleaning it (risk of electrocution).
After using the power mixer in a hot preparation,
cool the bottom of the foot in cold water before dismantling the bell from the foot.
After completion of preparation, clean immediately
to prevent food from sticking to surfaces.
• MOTOR UNIT
Never put the motor unit and its handle in water,
clean them with a damp cloth or a sponge.
• FOOT AND BELL
It is possible to proceed in two ways:
The equipment must be clean at all stages of • Simple cleaning procedure
- Place the foot and bell into a suitable container
production.
with water and switch on for a few seconds to
It is vital to clean the power mixer thoroughly
clean the bell and the foot.
between each job using a detergent or disinfectant.
• N.B. NEVER USE PURE BLEACH
- After unplugging the appliance - essential -, making
sure that no water finds its way into the foot.
9
- Detach the bell from the foot to avoid a build-up
I M P O RTA N T
of condensation (Mini MP 190 V.V., Mini MP
240 V.V., Mini MP 190 Combi and Mini MP
240 Combi).
• Complete cleaning procedure
- Unplug the power mixer.
- Rinse the bell under the tap.
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents are
too alkaline (e.g. high levels of caustic soda or
ammonia) and totally incompatible with certain
types of plastic, causing them to deteriorate
rapidly.
- Remove the bell from the foot, then remove the
MAINTENANCE
blades. Be careful to avoid damaging the surface
of the blade shaft and the watertight seals. Do not
use too strong a detergent when cleaning the
• BLADE
W A R N I N G
From time to time, check:
- The state of the button’s watertight membrane.
Even the tiniest cracks will allow liquid to seep in.
- The state of the blender housing. This, should not
show any signs of cracking or any abnormal
openings which could allow access to the live
components.
TECHNICAL
SPECIFICATIONS
The performance of the cut essentially depends on
the state of your blades and their wear. The blades • WEIGHT AND DIMENSIONS (in mm)
- Ensure that all the different parts are thoroughly
are subject to wear and as such need to be replaced
dried before reassembly.
from time to time to ensure the consistent quality of
the end product.
• BLADE AND EMULSIFYING DISC
You are also advised to change, at the same time,
In order to clean the appliance thoroughly, the
the washer and the watertight seals.
blades and the disc must be removed from the bell
parts.
beforehand.
• WHISK
After they have been cleaned, make sure you The success of your preparation will depend
always dry the disc or blades properly to avoid essentially on the state of the metal wires and their
amount of wear and tear. They should therefore be
oxidation.
replaced from time to time in order to ensure
• WHISK
optimum quality of the finished product.
The whisks can be cleaned either by hand or in a
dishwasher.
Never immerse the gear box in water.
Never put in the dishwasher the gear box.
Clean it with a slightly damp cloth or sponge.
10
• FOOT SEAL
In order to maintain a perfect watertight seal
between the foot and the bell it is necessary to
check the wear of the seal regularly and replace it if
necessary.
Dimensions (mm)
Models
Weight (Kg)
A
B
C
D
Mini MP
160 V.V.
E
F
78
430
65
160
1,41 1,94
Mini MP
190 V.V.
78
470
65
190
Mini MP
240 V.V.
78
520
65
240
Mini MP
190 Combi
78
470
65
190 255 100 1,95 2,68
Mini MP
240 Combi
78
520
65
240 255 100 1,98 2,70
Net
Gross
Single-phase machine Mini MP 240 V.V.
Mixer Speed
Power
Motor
(rpm)
(watts)
• Safety control button
Intensity
(Amp.)
2000 to 12500
270
1.5
1,44 1,97
120 V/60 Hz
2000 to 12500
265
2.6
press down two buttons to start the power mixer.
1,47 2,00
220 V/60 Hz
2000 to 12500
250
1.4
In order to start the machine, read the paragraph
entitled OPERATING THE APPLIANCE (page 6).
Single-phase machine Mini MP 190 Combi
Mixer Speed
(rpm)
Whisk Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
230 V/50 Hz
2000 to 12500
350 to 1560
250
1.3
We recommend that you ensure that the container is 120 V/60 Hz
placed on a stable and solid work surface.
220 V/60 Hz
2000 to 12500
350 to 1560
245
2.4
2000 to 12500
350 to 1560
230
1.2
• WORKING HEIGHT
• NOISE LEVEL
Single-phase machine Mini MP 240 Combi
The equivalent continuous sound level when the foot
is not immersed in anything is less than 70 dB (A).
Mixer Speed
(rpm)
Whisk Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
• ELECTRICAL DATA
230 V/50 Hz
2000 to 12500
350 to 1560
270
1.5
Single-phase machine Mini MP 160 V.V.
120 V/60 Hz
2000 to 12500
350 to 1560
265
2.6
220 V/60 Hz
2000 to 12500
350 to 1560
250
1.4
Motor
Mixer Speed
(rpm)
Power
(watts)
Intensity
(Amp.)
230 V/50 Hz
2000 to 12500
220
1.1
120 V/60 Hz
2000 to 12500
215
1.9
220 V/60 Hz
2000 to 12500
200
1
Single-phase machine Mini MP 190 V.V.
Power
(watts)
Intensity
(Amp.)
• Thermal and overload protection
If there is an obstruction in the container (a spoon
or utensil) or the machine is exposed to over
use/overload, the thermal safety mechanism
automatically stop the motor. In this case, wait for
the power mixer to cool down completely before
Motor
Mixer Speed
(rpm)
starting of the power mixer. In fact, it is necessary to
230 V/50 Hz
Motor
Motor
This safety mechanism prevents any unintentional
SAFETY
W A R N I N G
The blades are extremely sharp.
Handle with care.
ROBOT-COUPE power mixers are equipped with a
230 V/50 Hz
2000 to 12500
250
1.3
safety system comprising of a :
120 V/60 Hz
2000 to 12500
245
2.4
- safety control button,
220 V/60 Hz
2000 to 12500
230
1.2
- safeties on motor: thermal and overload protection.
restarting, see paragraph entitled OPERATING THE
APPLIANCE (page 6).
R E M E M B E R
Never try to override the locking and safety
mechanisms.
Never insert an object into the preparation.
Never switch the appliance on unless it has been
placed in the preparation bowl.
Before dismantling the foot or bell, always check
that the power mixer is unplugged.
We recommend that you tilt the power mixer at
a slight angle to prevent the bell from
touching the bottom of the container.
11
PROBLEMS
STANDARDS
At first, try to identify precisely what has caused the MACHINES IN COMPLIANCE WITH:
power mixer to stop.
• The following European directives and related
• If it is due to a powercut if the appliance has
national legislation:
been unplugged.
- Modified "machinery" directive 98/37/EEC,
- Release the control button (BC).
2006/42/EEC,
- Check the power supply.
- "Low voltage" directive 73/23/EEC,
- Restart the power mixer following the paragraph
2006/95/EEC,
entitled OPERATING THE APPLIANCE (page 6).
- "EMC" directive 89/336/EEC, 2004/108/EEC,
• If you cannot locate the cause of the problem
- Release the control button (BC).
- Unplug the power mixer.
- Check :
- "Materials and parts in food contact" directive
89/109/EEC,
- Commission Directive 2002/72/EC of 6 August
2002 relating to plastic materials and articles
intended to come into contact with foodstuffs.
- the plug,
- that the blades are free to rotate in the bell,
• The following European harmonized standards
- the state of the power cord,
and standards setting out health and safety rules:
- that the drive shaft is free to rotate. To do this, - We certify that the Mini MP comply with
remove the bell and test the rotation of the end of the essential requirements of the standard
the drive shaft manually.
EN 292 - 1 and 2: machine safety - general design
If a malfunction occurs which is not on our list of principles,
possible faults, consult your retailer or return the - EN 60204 -1 (2006).
appliance to the after-sales service.
- For hand-held blenders and whisk : EN 12853.
(Procedure to follow if the stick blender is
accidentally immersed during use).
12
TECHNICAL DATA
13
14
15
16
17
18
19
20
21
22
23
25
Administration Commerciale France
& Service Après-Vente
Agence de Service Après-Vente
pour la Région Parisienne
Export Department
Tél. : 03 85 69 50 00 - Fax : 03 85 69 50 07
12, avenue du Maréchal Leclerc - BP 134
71305 Montceau-en-Bourgogne Cedex
email : [email protected]
Tél. : 01 43 98 88 15 - Fax : 01 43 74 36 26
48, rue des Vignerons
BP 157
94305 Vincennes Cedex - France
Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26
48, rue des Vignerons - BP 157
94305 Vincennes Cedex - France
http://www.robot-coupe.com - email : [email protected]
Réf. : 410 294 - 09/2008 - Nouveaux Mini MP - Anglais
FABRIQUÉ EN FRANCE PAR ROBOT-COUPE S.N.C.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement