RSV-SATA-Cage-34 Internal SATA/SAS Hot-Swap

RSV-SATA-Cage-34 Internal SATA/SAS Hot-Swap
Internal SATA/SAS Hot-Swap Cage
3x 5.25” to 4x 3.5”/2.5”
RSV-SATA-Cage-34
USER’S Manual
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
Contents
Product Overview
2
Introduction
3
Specification
3
Accessory Bag Detail
3
Installation Guide
4
Hard Drive Tray Assembly / Disassembly
4
Hard Drive Installation
4
Installing a 3.5” HDD
4
Installing a 2.5” HDD
5
Hot Swap Cage Cable Installation
5
Hot Swap Cage Installation – Case
6
Hot Swap Cage Installation – Server (RSV -L4000 as example)
7
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
Product Overview
2
User Manual
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
Introduction
RSV-SATA-Cage-34 is a Hot Swap HDD Cage which converts space of 3x 5.25”
CD-rom / DVD-rom to 4x 3.5” or 2.5” SATAI, SATAII, SATAIII, or SAS HDD tray.
This cage allows you make better usage of your Server or Case spaces.
To use the Hot-Swap feature, Please set motherboard BIOS to AHCI and
format the HDD using AHCI.
Specification
Enclosure Type
Modular HDD Rack
Color
Black
Case Material
Steel, ABS
Cooling System
120mm Fans
Rear 120 mm Fan included
Expansion
Hot-Swap 3.5"/2.5” Drive Bays
4x (SATA I, II, III, & SAS supported)
Physical Specification
Control & Indicator
4 x LED (HDD)
Dimensions(L x W x H)
5.87" x 5.02" x 8.27" in (149 x 127.5 x 210 mm)
Weight
42.33 oz (1.2 kg)
1x RSV-SATA-Cage-34 Internal SATA/SAS Hot-Swap Cage
4x SATA Cables
Package Contents
1x Accessory Bag
Accessory Bag Detail
PIC
ITEM
Round head with cap screw x8
Socket head cap screw x16
Clinch screw x16
3
Internal SATA/SAS Hot-Swap Cage
User Manual
RSV-SATA-Cage-34
Installation Guide
• Hard Drive Tray Assembly / Disassembly
1.
Each HDD Tray has a press
button for releasing the
hinge. To remove the HDD
Tray; first press the button.
• Hard Drive Installation
Installing a 3.5” HDD
1.
To install a 3.5” HDD, please
make sure that the 3.5” HDD
is align with the screw holes
on the side of the tray. Then
you can fasten all the screws
onto the HDD. (Please make
sure that the connector of
the HDD is facing outward)
4
Internal SATA/SAS Hot-Swap Cage
User Manual
RSV-SATA-Cage-34
Installing a 2.5” HDD
1.
To install a 2.5” HDD, please
make sure that the 2.5” HDD
is align with the screw holes
on the tray. Then you can
fasten all the screws onto the
HDD. (Please make sure that
the connector of the HDD is
facing outward)
• Hot Swap Cage Cable Installation
Fan 12CM
HDD power 12V
HDD 1
HDD 2
HDD 3
HDD 4
Fan power 12V
5
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
Hot Swap Cage Installation – Case
1.
Remove three 5.25” bay
covers from the case.
2.
Insert the Cage into the slot.
6
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
3.
Secure the Cage with
Screws
Hot Swap Cage Installation – Server (RSV-L4000 as example)
1.
Remove the screws from
each side of the Chassis.
(two on each side)
2.
Once the screws removed,
push the top cover to
remove from the chassis.
7
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
3.
To remove the cage; first
press the two round shape
button using your thumbs,
then use your index finger to
push the 3.5” module to
remove it.
4.
Pull the module out from the
front.
5.
Take down the top and
bottom Cage rails.
8
Internal SATA/SAS Hot-Swap Cage
RSV-SATA-Cage-34
User Manual
6.
Place the four rails onto the
SATA/SAS Hot-Swap Cage
7.
Slide the Cage into the
Server Chassis to complete
the installation process.
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future
support for your product.
Support: [email protected]
Call Center: (800) 575-9885
Web: http://www.rosewill.com
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement