Stylus Photo 960 - Start Here Card - Epson America, Inc.

Stylus Photo 960 - Start Here Card - Epson America, Inc.
CPD14810R1_Tor_SH_E.qxd
3/21/03
3:58 PM
Page 1
EPSON Stylus Photo 960
2 Attach
the
Paper Support
EPSON Stylus Photo 960
®
Insert the paper support into its slots
above the sheet feeder.
Start
Here
(To install the roll paper holders and
automatic roll paper cutter and basket,
see your Printer Basics book.)
4 Turn On the Printer
1
Connect the power cord that came with your printer to the printer’s AC inlet.
2
Plug the other end of the power cord into a grounded electrical outlet.
3
Press and release the
power button to turn it on.
Power button
3 Connect the Printer
CAUTION: Never use an external switch, such as a wall switch
or power strip switch, to turn the printer on or off.
Connection cables are not included with your printer. You need only one of the following cables:
•
USB cable (PC and Mac®) or
•
Parallel cable (PC only)
USB Cable Users (PC and Mac)
1
Shut down your computer. In Windows®, click Start and select your Shut Down
or Turn Off option.
5 Install Ink Cartridges
1
Open the output tray and the printer cover. Then open the cartridge cover and
remove the protective sheet.
2
Remove the ink cartridges from
their packages. Don’t remove or
tear the blue labels from their sides.
Leave your computer turned off until section 7.
CPD-14810R1
2
Plug the square
3
Plug the flat
end of the cable into your computer’s USB port until it stops.
(You can use any open USB port.)
end of the cable into your printer’s USB port until it stops.
1 Unpack
1
Remove everything from the box.
Printer Basics
Printer Software
CD-ROM
Don’t touch the green part.
Square end
Flat end
3
Power cord
Paper
support
7 Ink cartridges
Make sure the colored circles match.
Print position
check disk
Printer
Roll paper
holders
Mini-CD ring
Parallel Cable Users (PC only)
1
Basket for
cut photos
Front sheet feeder
2
Slide each cartridge individually into its slot with the green part facing the back.
Then push each one down until it clicks into place.
Shut down your computer. Click Start and select your Shut Down or Turn Off option.
Leave your computer turned off until section 7.
Automatic roll
paper cutter
CD tray
Remove all the blue tape and packing materials inside and around the printer.
2
Plug the end of the cable with the slotted connector into your printer’s parallel port,
then secure it with the wire clips.
3
Plug the other end of the cable into your computer’s parallel port and secure it
with the screws.
4
Close the cartridge cover and printer cover.
5
Press the
ink button.
Ink button
The green power and red ink
lights flash as your printer charges ink
for about 11/2 minutes.
Slotted end
End with screws
CAUTION: Don’t turn off the printer
or interrupt charging, or you’ll waste
ink. If the power and ink lights
don’t turn off after 5 minutes, and
the printer isn’t making any noise,
you can turn it off.
Turn over
CPD14810R1_Tor_SH_E.qxd
3/21/03
3:58 PM
Page 2
6 Load Paper
1
2
3
Macintosh
4
Click Next on the Add New
Hardware Wizard screen.
Fan your paper and place it against
the right side of the sheet feeder
(up to the arrow inside the edge guide).
Slide the edge guide to fit lightly
against the paper.
5
7 Install Software
Make sure your printer is connected and turned on. Then turn on your Macintosh.
If you see a message about looking for software on the Internet, click Cancel.
2
Put the EPSON CD-ROM in your CD-ROM or DVD drive.
3
Double-click the EPSON CD-ROM icon on your desktop,
if necessary, then double-click the
EPSON installer
icon in the window that opens.
4
Read and agree to the license agreement
to continue the installation.
5
Click Install Printer Driver and follow the
on-screen instructions to install the software
and restart your Macintosh.
6
After your Macintosh restarts, register your printer
with EPSON as instructed (Mac OS 8.6 to 9.x only).
7
Mac OS X: Open Print Center. If you don‘t see your
printer in the printer list, make sure the printer is turned
on and connected. Then select EPSON USB in the
pull-down menu on the Printer List screen, click
SP 960 (USB), and click Add. Close Print Center.
Click the Search for option,
then click Next.
Pull out the output tray extensions.
6
1
Click CD-ROM drive, then click
Next. Make sure Specify a location
is not checked.
Windows
7
If you’re using Windows Me or 2000, see “Installing Your Printer Software” in the
Printer Basics book for instructions.
Follow the steps below to install the software for Windows XP or Windows 98.
Your computer detects your printer again
and you see a screen like this:
Windows XP
1
2
Make sure your printer is connected and turned on.
Then turn on your computer.
8
Wait for Windows XP to detect your printer connection
and display this screen:
NOTE: If this screen doesn’t appear, make sure
your printer is turned on and connected.
At the final Add New Hardware Wizard screen,
click Finish.
10
When you see the license agreement, read it and
click Agree. You see the Options Menu.
11
Put the EPSON® CD-ROM in your CD-ROM or
DVD drive and wait a few seconds for the
CD-ROM to be recognized.
Continue clicking Next or Finish.
Installation proceeds automatically.
9
DON’T CLICK ANY BUTTONS ON THIS SCREEN.
3
At the next screen, click Next.
Installation proceeds automatically.
When installation halts, click Finish.
At the final Found New Hardware Wizard screen,
click Finish.
When you see the license agreement, read it and
click Agree. You see the Options Menu:
6
Click Install Optional Software.
1
At the Optional Software menu, click the button for
each program to learn more about it. If you want the
program, click Install and follow the instructions on
the screen. Then click Back to return to the menu.
2
If you see a message about installing QuickTime,®
click Yes and follow the on-screen instructions.
You don’t need a registration number.
3
When you’re finished installing software, close any
open windows and click Back.
4
Click View Software Offers. Click the button for each offer to learn more about it,
then follow the instructions on the screen. Click Back to return to the menu.
Now go to “Installing Optional Software” in the next column.
5
If you see a message asking you to restart your computer, select No and click Finish. If
your computer restarts automatically, you need to return to the menu. Click Start (on
Windows XP), double-click My Computer, then double-click the EPSON CD-ROM icon.
6
When you’re finished, close any open windows and click Back.
7
Click Install Printer Information Center and follow the on-screen instructions.
8
Close any open windows and click Exit at the menu.
9
When you see the registration screen, register your printer with EPSON as instructed.
Remove the CD-ROM and keep it in case you need to reinstall any software later.
10
Restart your computer if prompted.
Windows 98
1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows 98 to detect your printer
connection and display a screen like this:
DON’T CLICK ANY BUTTONS ON THE SCREEN YET.
NOTE: If a screen like this doesn’t appear, make
sure your printer is turned on and connected.
3
Double-click the EPSON CD-ROM icon on your desktop, if necessary, then double-click the
EPSON installer icon.
9
Click Install Optional Software.
10
At the Optional Software menu, click the button for each program to learn more about it. If
you want the program, click Install and follow the instructions on the screen. After each
program is installed, click Back to return to the Optional Software menu.
11
Click Back to return to the Install Menu.
12
Click View Software Offers. Click the button for each offer to learn more about it, then
follow the instructions on the screen. Click Back to return to the menu.
13
When you’re finished, close any open windows and click Back.
14
Click Install Printer Information Center and follow the on-screen instructions.
15
For OS X users, if you want to print from Classic Applications, start your Macintosh in OS 9
and repeat steps 3 through 13.
16
Close any open windows and click Exit at the menu. Remove the CD-ROM and keep it in
case you need to reinstall any software later.
Continue with the steps below to finish installing software.
Installing Optional Software
5
8
Click Install Optional Software.
Your printer software installs automatically and various
messages appear on the screen.
4
Mac OS 8.6 to 9.x: Select the SP 960 icon in the Chooser. Select your USB port and
turn on background printing. Then close the Chooser.
Put the EPSON CD-ROM in your CD-ROM
or DVD drive and wait a few seconds for the
CD-ROM to be recognized.
You’re ready to print! See the next section.
8 Print
Now you’re ready to print. For instructions, use these resources:
• Your Printer Basics book
Learn about loading paper, printing photos and CDs, maintaining
your printer, solving problems, and contacting EPSON.
•
EPSON Printer Information Center on your desktop
Click Print Show to view helpful animations that show you
how to load roll paper and use the automatic cutter.
Click Reference Guide to view
detailed information about your printer.
You’re ready to print! See section 8.
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark
and EPSON PhotoCenter is a service mark of Epson America, Inc.
General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners.
EPSON disclaims any and all rights in those marks.
Continued
Printed on recycled paper. Copyright © 2002 by Epson America, Inc. 12/02
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement