Owner`s Manual

Owner’s Manual

Bluetooth Interface Adapter for iOS, Android, and other devices with Bluetooth Streaming capabilities.

www.vaistech.com

Copyright (C) 2003-2014 VAIS Technology Feb 12, 2014

Before You Start

2

!

WARNING

DO NOT DISASSEMBLE OR ALTER

Doing so may result in an accident, fire or electric shock.

Do not block your view

Do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays.

Do not block the airbag

Do not mount product or any added audio and/or video equipment where it can obstruct the operation of the safety device such as the airbag.

Distraction warning

Do not let product or any added audio and/or video equipment to distract you while you are driving.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL

Before starting any installation work , you must wait 90 seconds after turning the ignition switch to the LOCK position and disconnecting the negative (-) terminal from the battery. The supplemental restraint system (airbag) is equipped with a backup power source. If installation work is started less 90 seconds after disconnection of the negative (-)battery terminal, the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery the clock and audio systems memory will be erased. Before starting installation work make a record of the clock and audio systems memory settings. When installation is complete, reset the clock and audio systems to their previous settings . Power tilt, power telescopic steering column, front power seats, power mirrors, and power shoulder belt anchorage are equipped with a memory function .The rear power seat is not equipped with a memory function. e and they can make a record of the memory contents, rear power seat is not equipped with the memory function. When installation is complete, it is necessary to readjust the features to their previous settings

Never use a backup power supply (such as another battery) during installation work to avoid losing these memory settings.

!

CAUTION

DO NOT SPLICE INTO ELECTRICAL CABLES

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock .

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS

Cables or wiring that obstruct or get caught on the places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST

Moisture or dust may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS

The wiring and installation of this product requires special technical skills and experience.

USE ONLY SPECIFIED ACCESSORY PARTS

Use of other than specified parts may damage product internally.

FOLLOW THE OPERATIONAL AND INSTALLATION MANUALS.

YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR

TO INSTALLING AND USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE

INSTALLATION SCHEMATICS/INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING

INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE THE PRODUCT AND THE

VEHICLE, WILL VOID THE PRODUCT WARRANTY, MAY VOID THE VEHICLE WARRANTY

CHECK YOUR LOCAL LAWS

Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a video screen within the sight of the Driver. If you have purchased such a product, you should use the product only in locations where it is legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.

TROUBLESHOOTING

Should this product fail to operate properly, please contact your Dealer or our Customer Service Department at [email protected].

Before You Start

3

i

IMPORTANT

!

The iPod/iPhone has NOT been designed to withstand automotive temperature extremes. You may damage your iPod/iPhone If you leave it inside the vehicle on a hot or cold day. For further information please refer to the iPod/iPhone specifications.

!

VAIS Technology accepts no responsibility for loss of data on the iPod/iPhone, even if that data is lost while using this unit

i

About iPod Operation

!

The iPod/iPhone is charging as long as it’s connected to the unit and the vehicle’s ignition is “ON” or in the “Acc” position. The head unit does not have to be “ON”.

!

The iPod/iPhone automatically turns ON when you turn the ignition key into the “ON” or “Acc” position.

!

The iPod/iPhone automatically turns OFF when the vehicle’s ignition key is turned OFF. (The iPod/iPhone is paused and goes into Sleep mode after some period of inactivity).

!

iPod/iPhone interface mode is displayed in the same way as a factory CD-changer, MiniDisc-changer or CD-MP3

Changer.

i

About iPod Settings

!

WE STRONGLY RECOMMEND THAT YOU ORGANIZE YOUR SONGS INTO PLAYLISTS FOR PROPER

OPERATION OF THIS UNIT.

T

o avoid improper track number/text information display (Do NOT place more then 99 songs into single playlist for CD changer emulation and 999 songs for MD/CD-MP3 changer emulation)

IF IPOD DOES NOT HAVE PLAYLISTS/SONGS IT MAY CAUSE UNPREDICTABLE OUTCOME AND IMPROPER

OPERATION OF THE UNIT.

EMPTY PLAYLISTS WILL CAUSE UNIT TO SEARCH FOR NEXT PLAYLIST WITH SONGS IN IT.

RECOMMENDATIONS

!

We recommend that you set the iPod Equalizer to be “OFF”.

!

We recommend that you set “Sound Check” on the iPod to “ON” (if applicable).

i

IMPORTANT

(1) After a delay of five seconds, this product will automatically bypass the automobile manufacturer's on-screen warnings concerning use of the onboard navigation system.

These warnings are: ”Caution, Drive safely and obey traffic rules. Watching this screen while vehicle is in motion can lead to a serious accident. Make selections only while stopped. Some map data may be incorrect. Read safety instructions in Navigation Manual.”

(2) PLEASE PRE-NOTIFY EVERY DRIVER OF THIS VEHICLE OF THE CONTENT OF

THE AUTOMOBILE MANUFACTURER'S WARNING.

(3) IF YOU PREFER THAT THIS PRODUCT NOT ELIMINATE THE FOREGOING

WARNINGS, YOU MAY DISABLE THIS FEATURE BY FOLLOWING THE

INSTRUCTIONS IN THIS OWNER'S MANUAL, OR REFER TO INSTRUCTIONS

AVAILABLE ON THE MANUFACTURER'S WEBSITE WWW.VAISTECH.COM

.

!

Connections

Connecting SoundLinQ3

SoundLinQ3

Interface Adapter

Model SL3B

SoundLinQ3

12-pin Audio Harness (36”)

SoundLinQ3


4

Audio

Harness

Bluetooth

Module

Service

Port

Mode

Programming switch

USB Port

(Charging ONLY)

Connections

Connecting SoundLinQ3 to head unit using 20-pin Y-harness

5

Head Unit (Radio Receiver)

20-pin connector

Plug into

Head Unit

(connector “A”)

Factory Audio harness

Lexus GX 470 Radio Receiver shown as an example.

Locate connector “A” (20-pin connector) on your Radio.

Connector location on the Radio may be different from shown above.

To SoundLinQ3

SoundLinQ3


Connection diagram used for all 2001-2009 Lexus vehicles

Connecting SoundLinQ3 to head unit using 12-pin Y-harness

Head Unit (Radio Receiver)

12-pin connector

Factory Audio harness

(if present)

!

CAUTION

Toyota head units

20-pin connector

IS NOT COMPATIBLE with SoundLinQ3

Audio Harness used for Lexus vehicles

Lexus GX 470 Radio Receiver shown as an example.

Locate connector “B” (12-pin connector) on your Radio.

Connector location on the Radio may be different from shown above.

To SoundLinQ3

Plug into

Head Unit

(connector “B”)

SoundLinQ3


Connection diagram used for most 2004-2012 Toyota vehicles and

for most 2004-2009 Lexus vehicles (excluding Lexus SC430)

!

WARNING

To Un-plug any connector do NOT pull it by the wires.

Installation

6

i

IMPORTANT

We strongly recommend that you install the unit in easily accessible location. So you can later upgrade the unit or re-program it in case of incorrect programming.

Installation

@

Gain access to the back of you vehicle’s Head Unit.

@

Find the same port as our Y-Harness (see “Connecting SoundLinQ3 to head unit”)

@

Disconnect the existing connector and plug in our Y-Harness connector into this port, then plug female end of Audio

Harness to the plug in for your factory connector.

Audio harness female connector is not used in some vehicles, in this case isolate unused plug to prevent accidental shortage to vehicle body.

@

Plug the other end of Audio Harness into designated port on SoundLinQ3.

@

Connect iPod cable as shown in the”Connecting SoundLinQ3” picture.

@

Setup proper Emulation Mode for this unit (see “Emulation Mode Selection”)

@

Turn the car on and check SoundLinQ3 functionality and (especially Text capability) before the final assembly.

@

Make sure your iPod has at least two playlists, in order for this unit to operate properly.

@

Please mount this unit in easy accessible location for upgrading and re-programming purposes.

@

Secure the Head Unit in its original position.

Emulation Mode Selection

MD Changer Emulation Mode programming steps:

@

Properly install this unit.

@

Put both programming switches in “DOWN” position.

@

Put ignition switch into “ACC” position.

@

Wait for long beep followed by a few short beeps. This take up to one minute.

@

Return programming switches into their default position (both switches “UP”).

Wait up to 30 seconds until confirmation beep.

@

Put ignition switch into the “OFF” position. Wait at least 10 seconds.

@

Put ignition switch into the “ACC” or “ON” position.

@

Check SoundLinQ3 for functionality, especially TEXT capabilities.

Both switches

“DOWN”

Ignition into

“ACC” or “ON” position Confirmation beep

(Red LED blinks)

CD Changer Emulation Mode programming steps:

Both switches

“UP” up to 30 sec

Confirmation beep

(Red LED blinks)

@


@

Put “Right” programming switch in the “DOWN” position.

@

Put ignition switch into the “ACC” position.

@

Wait for long beep followed by a few short beeps. This may take up to one minute.

@



@

Put ignition switch into the“OFF” position. Wait at least 10 seconds.

@

Put ignition switch into the “ACC” or “ON” position.

@

Check SoundLinQ3 for functionality, especially TEXT capabilities.

Ignition into

“OFF” position up to 10 sec

1 2

ON

1 2

ON

Right switch

“DOWN”

Ignition into

“ACC” or “ON” position Confirmation beep

(Red LED blinks)

Both switches


Ignition into


Confirmation beep

(Red LED blinks)

i

IMPORTANT

!

Improper Emulation Mode setting may cause this unit to be unrecognized by head unit.

!

CD or MD Changer Emulation Mode Programming MUST BE DONE in order for the unit to find proper address location in the vehicle Audio/Video network.

Installation

CD-MP3 Emulation Mode Selection (CD-MP3 emulation)

CD-MP3 Emulation Mode programming steps:

@


@

Put “Left” programming switch in “DOWN” position.

@

Put ignition switch into the “ACC” position.

@

Wait for long beep followed by a few short beeps. This may take up to one minute.

@



@

Put ignition switch into the “OFF” position. Wait at least 10 seconds.

@

Put ignition switch into “ACC” or “ON” position.

@

Check SoundLinQ for functionality, especially TEXT capabilities.

7

1 2

ON

Left switch

“DOWN”

Ignition into

“ACC” or “ON” position

Confirmation beep

(Red LED blinks)

1 2

ON

Both switches


Confirmation beep

(Red LED blinks)

Ignition into


Mounting unit using Velcro fasteners

SoundLinQ3

“Hard” Velcro Fastener

“Soft” Velcro Fastener

Carpet or car chassis

NOTE

!

Velcro Fasteners are not included

!

VAIS Technology strongly recomand to ground unit to the car chassis for best results

Bluetooth Connection

Connecting Android Device to SL3B

@

@

@

@

@

@

@

@

@

On the Home screen, press the Menu key.

Touch Settings

Touch Wireless & networks

Touch Bluetooth to turn it On

Touch Bluetooth settings

Touch Scan for devices (make sure your headset is in pairing mode).

Your phone scans for available Bluetooth devices (SL3B:XX:XX)

Touch the Bluetooth device (SL3B:XX:XX) to select it

Touch the device name again to connect to it.

@

@

@

@

@

@

@

@

Connecting iPod, iPhone, iPad to SL3B

From the home screen, tap Settings.

Tap Bluetooth.

Pair with Bluetooth

Tap the Bluetooth toggle to enable the feature if it is not already active.

The handset automatically searches for available Bluetooth devices.

Tap the preferred Bluetooth device (SL3B:XX:XX).

Pair with Bluetooth

The Bluetooth device is now paired.

8

Other devices may have other requirements.

Refer to the Bluetooth device's user manual for device specific requirements.

NOTE:

SL3B automatically connects to the last connected device. In case SL3B does not connect, you can force connection by activating and then deactivating “SCAN” button on the factory radio.

Special Feature

i

IMPORTANT


These warnings are: ”Caution, Drive safely and obey traffic rules. Watching this screen while vehicle is in motion can lead to a serious accident. Make selections only while stopped. Some map data may be incorrect. Read safety instructions in Navigation

Manual.”

(2) PLEASE PRE-NOTIFY EVERY DRIVER OF THIS VEHICLE OF THE

CONTENT OF THE AUTOMOBILE MANUFACTURER'S WARNING.

(3) IF YOU PREFER THAT THIS PRODUCT NOT ELIMINATE THE

FOREGOING WARNINGS, YOU MAY DISABLE THIS FEATURE BY

FOLLOWING THE INSTRUCTIONS IN THIS OWNER'S MANUAL, OR

REFER TO INSTRUCTIONS AVAILABLE ON THE MANUFACTURER'S

WEBSITE WWW.VAISTECH.COM

.

!

9

Activate / Deactivate “I Agree” Automatic Bypass Function

@

Put your device in Simple Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds).

@

Push DISC REPEAT button to hear a long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.

(For vehicles not equipped with DISC REPEAT as a physical button, push and hold the REPEAT button until you hear a long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.

Head Unit Controls

CD/MD Changer Emulation

Source Selection

Select desired source by pressing

DISC button on the head unit or MODE on the steering wheel control.

(See diagram below)

Head Unit:

To switch between the unit sources you need to use

“DISC” or “CD” button on the radio

(Diagram below assumes factory CD changer is present).

CD CD1

SL3B

CD CD1

SL3B

OR

CD MD1

SL3B

CD MD1

SL3B

Steering Wheel control:

To switch between the unit and radio you need to use the “MODE” button on the steering wheel control.

(Diagram below assumes following sources are present).

AM FM1 FM2 TAPE CD CD1

SL3B

10

Functionality Description

Control of connected Bluetooth Streaming Device is done through your head unit or the steering wheel controls (explained below).

This unit can be programmed in CD changer emulation mode , MD changer emulation mode and CD-MP3 Emulation.

Please see attached chart to determine which emulation mode is compatible with your vehicle.

MD changer emulation

For Radio Receiver with LCD

CD changer emulation

For Radio Receiver with LCD

For Radio Integrated into Navigation System

MD-TEXT

Radio Integrated into Navigation System

CD-Text support


Radio Integrated into Navigation System

Direct disc selection

MAY NOT be available for all vehicle model.

Applicable for iOS integration ONLY.

Song Title, Artist Name or Album Name

(see “DISC SCAN” function)

Playlist Title

NOTE: Folder/Disc Title information may not display properly if song selected directly from the iOS device.

Some applications may not refresh Folder/Disc Title when the song changes. and

TRACK-

The track will change after a brief pause when you stop pressing the button.

NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function.

and

DISC-

Select the desired playlist

(Maximum number of playlists is 99).

The new playlist will start after a brief pause when you stop pressing the button.

NOTE: If there are no songs in a playlist the unit will jump to the next playlist. and

SCROLL DOWN

Fast Forward/Rewind the song

NOTE: For vehicle not equipped with [DISC+] and [DISC-] buttons, if “DISC SCAN” function is active use

[SCROLL UP] and [SCROLL DOWN] as [DISC+] and [DISC-] to select the desired playlist

NOTE: if “ SCAN” function is active use [SCROLL UP] and [SCROLL DOWN] as “TRACK +10” and “TRACK -10” to select the desired song

NOTE: For vehicle not equipped with [DISC+] and [DISC-] buttons, if “DISC SCAN” function is active use


NOTE: if “ SCAN” function is active use [SCROLL UP] and [SCROLL DOWN] as “TRACK +10” and “TRACK -10” to select the desired song

NOTE: if “ SCAN” and “DISC SCAN” function are active use [SCROLL UP] and

[SCROLL DOWN] as “TRACK +50” and “TRACK -50” to select the desired song

Activates iPod “Repeat All” function.

NOTE: Repeats all songs in active playlist.

Activates iPod “Shuffle” function.

NOTE: Shuffle all songs in the active playlist. iPod starts playing songs from your entire playlist in random order, skipping audiobooks.

Select the desired track title display mode. You can choose between Song Title, Artist Name, or Album Name.

Note: Track Title information can ONLY be displayed on Radio LCD or Navigation screen that support CD or MD changers with CD-Text

or MD-Text.

NOTE:


Android Devices controls


12

NOTE: Functionality such as track information display and controls must be supported by connected device and selected application.

TRACK+

and

TRACK-

Select the desired track

(Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode).

You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.


NOTE: Some devices/applications may not display track information correctly.

RPT

Activates “Repeat One” function

NOTE: This functionality must be supported by selected application.

DISC RPT

Activates “Repeat All” function.

NOTE: Repeats all songs in current category selection.


RAND

Activates “Shuffle” function.

NOTE: Shuffle all songs in the current category selection.


DISC RAND

Select the desired track title display mode. You can choose between Song Title, Artist Name, or Album Name.

Note: Track Title information can ONLY be displayed on Radio LCD or Navigation screen that support CD or MD changers with CD-Text

or MD-Text.

Displayed Errors (available only as a TEXT message)

Check BT Device

Android (as a Bluetooth Device) is not connected to SL3B.

NOTE:


Head Unit Controls

CD-MP3 Changer Emulation

Source Selection

Select desired source by pressing

DISC button on the head unit or MODE on the steering wheel control.

(See diagram below)

Head Unit:

To switch between the unit sources you need to use

“DISC” or “CD” button on the radio

(Diagram below assumes factory CD changer is present).

CD CDC1

SL3B

CD CDC1

SL3B

OR

CDC1 CDC2

SL3B

CDC1 CDC2

SL3B

Steering Wheel control:

To switch between the unit and radio you need to use the “MODE” button on the steering wheel control.

(Diagram below assumes following sources are present).

AM FM1 FM2 TAPE CD CD1

SL3B

13

Functionality Description

Control of connected Bluetooth Streaming Device is done through your head unit or the steering wheel controls (explained below).

This unit can be programmed in CD changer emulation mode , MD changer emulation mode and CD-MP3 Emulation.

Please see attached chart to determine which emulation mode is compatible with your vehicle.

CD-MP3 changer emulation


(5th Generation Navigation System)

This functionality applicable for iOS integration ONLY.

6 disc CD-changer

Disc 1 - Playlist

Disc 2 - Artist

Disc 3 - Album

Disc 4 - Genre

Disc 5 - Audiobook

Disc 6 - Podcast

List Of Folders (List of Albums) List Of Files (List of songs in selected Album)

List of folders represent either list of Playlists, Artists, Albums, Genres, Audiobooks, or Podcasts, depending on your “Browsing mode” selection.

“Browsing mode” selection:

Disc 1 - Playlists, Disc 2 - Artists, Disc 3 - Albums, Disc 4 - Genres, Disc 5 - Audiobooks, Disc 6 - Podcasts.

List of files represent list of songs in each of the folder category.

This functionality is available for all 5th Gen Navigation system.

Please note all Toyota vehicles except for Prius, do not have a list of files and folders display available on the screen due to Radio limitation.

!

Please also see “Activate / Deactivate ‘Disc Switching Fix’ Function”

iOS Device controls


14

NOTE: Folder/Disc Title information may not display properly if song selected directly from the iOS device.

Some applications may not refresh Folder/Disc Title when the song changes.

TRACK+

and

TRACK-


(Maximum number of tracks is 999 for CD-MP3 changer Emulation mode).



NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function.

FOLDER+

and

FOLDER-

Select the desired playlist

(Maximum number of playlists is 999).

You can fast switch through playlists by repeatedly pressing the [FOLDER+] / [FOLDER-] button.

The new playlist will start after a brief pause when you stop pressing the button.

NOTE: If there are no songs in a playlist the unit will jump to the next playlist.

SCROLL UP

and

SCROLL DOWN

Fast Forward/Rewind the song

NOTE: For vehicle not equipped with [DISC+] and [DISC-] buttons, if “SCAN” function is active use


(in this case [DISC+] and

[DISC-] will work as a [FOLDER+] and [FOLDER-])

RPT

Activates iPod “Repeat One” function

FOLDER RPT

Press and hold the RPT button to activate playlist repeat. This mode will cause the current playlist to start over with the first track after the last track has been played, instead of moving on to the next playlist.

NOTE: Repeats all songs in active playlist.

RAND

The RAND button activates the playlist randomizer function. All tracks in the current playlist will be placed into a new, random order. The currently selected track will be renumbered to Track 1, and all subsequent tracks will be random selections from the playlist. After activating the playlist randomizer, the displayed track number does not map to the physical track number in the playlist, but rather to the new, randomized order.

NOTE: Shuffle all songs in the active playlist. iPod starts playing songs from your entire playlist in random order, skipping audiobooks.

FOLDER LIST

The FOLDER button will bring up a new display that allows you to scroll through the playlists and tracks on your iPod device. [Folder Up] or [Folder Down] will scroll through playlists, wile [File Up] or [File Down] will scroll through tracks.

If a playlist contains a large number of songs, it may take some time for the data to be transferred to the head unit.

This can cause the scroll buttons to become unresponsive during rapid scrolling, until data has been loaded from the iPod.

NOTE: Some vehicles' head units do not support the Folder/File display function. In this case when you press FOLDER you will see a blank display in the Folder and File lists.

DETAIL

Pressing the DETAIL button will bring up details on the current track. It will display Album Title, Track Title, and Artist.

Genre is not supported and will always be blank.

NOTE: You can switch tracks while in DETAIL view, but it will not display the current track number.


NOTE:


Android Device controls


15

NOTE: Functionality such as track information display and controls must be supported by connected device and selected application.

TRACK+

and

TRACK-


(Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode).



NOTE: Some devices/applications may not display track information correctly.

RPT

Activates “Repeat One” function


DISC RPT

Activates “Repeat All” function.

NOTE: Repeats all songs in current category selection.


RAND

Activates “Shuffle” function.

NOTE: Shuffle all songs in the current category selection.


FOLDER LIST

Information displayed in Folders/Files list does not correspond to current selection.

NOTE: Some vehicles' head units do not support the Folder/File display function. In this case when you press FOLDER you will see a blank display in the Folder and File lists.

DETAIL

Pressing the DETAIL button will bring up details on the current track. It will display Album Title, Track Title, and Artist.

Genre is not supported and will always be blank.

NOTE: You can switch tracks while in DETAIL view, but it will not display the current track number.


Check BT Device

Android (as a Bluetooth Device) is not connected to SL3B.

NOTE:


Additional iOS Features

Internet Radio / Third party Music Players

Support for iOS 5.1+ devices

i

IMPORTANT

To play Internet Radio or Third party Music Player applications (iOS 5.1+ device required):

1. Connect iPod/iPhone.

2. Let the iPod/iPhone “built-in” player to start playing.

3. Start Internet Radio/Third party Music Player application

4. Text information (Artist Name and Song Title) will appear on the nav display/radio LCD.

NOTE: Some applications require manually select “Play”.

For CD-MP3 Emulation “ List of files” and “List of folders” will not display correct information.

TRACK+

and

TRACK-


NOTE: Functionality of [TRACK+] / [TRACK-] buttons are available only if iOS application supports it.


FOLDER+

and

FOLDER-

Will exit currently played Application and return to “built-in” iPod Player.


DISC+

and

DISC-

Will exit currently played Application and return to “built-in” iPod Player.

16

Additional controls

17

Settings Mode

Enable/Disable

“Settings mode”- press the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds).

You will hear a long beep.

Sound Level Adjustment

@

Enable

“Settings mode”

@

Start playing desired song by pressing the [Play/Pause] button on the connected BT Audio Device

@

Activate “SCAN” function on the head unit

@

Set the desired volume on the head unit

@

While

“SCAN” is active use [SCROLL UP] to increase volume and [SCROLL DOWN] to decrease volume.

@

Sound level [01..10] will be displayed as Seconds on the head unit.

@

Deactivate “SCAN” function

@

Disable


NOTE: Remember, a high sound level may result in noticeable sound distortion.

Activate / Deactivate “Disc Switching Fix” Function

“Disc switching Fix” has been designed to avoid a Radio malfunctioning in some vehicles while navigating through disc selection. SL3B comes with this feature activated by default, and it can causes screen to go black for 0.5 sec -1.5 sec in between disc selection. It doesn't have to be ON for all vehicles. Users are welcome to turn this feature OFF to determine wether or not it actually needs to be ON or OFF for their vehicles.

@

Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds).

@

Push DISC RANDOM button to hear a long beep to toggle the “Disc Switching Fix” Function ON and OFF. (For vehicles not equipped with DISC RANDOM as a physical button, push and hold the REPEAT button until you hear a long beep to toggle the “Disc Switching Fix” Function ON and OFF.

@

Disable


Activate / Deactivate “I Agree” Automatic Bypass Function

@

Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds).

@

Push DISC REPEAT button to hear a long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.

(For vehicles not equipped with DISC REPEAT as a physical button, push and hold the REPEAT button until you hear a long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.

i

IMPORTANT


These warnings are: ”Caution, Drive safely and obey traffic rules. Watching this screen while vehicle is in motion can lead to a serious accident. Make selections only while stopped. Some map data may be incorrect. Read safety instructions in Navigation Manual.”

(2) PLEASE PRE-NOTIFY EVERY DRIVER OF THIS VEHICLE OF THE

CONTENT OF THE AUTOMOBILE MANUFACTURER'S WARNING.

(3) IF YOU PREFER THAT THIS PRODUCT NOT ELIMINATE THE FOREGOING

WARNINGS, YOU MAY DISABLE THIS FEATURE BY FOLLOWING THE

INSTRUCTIONS IN THIS OWNER'S MANUAL, OR REFER TO INSTRUCTIONS

AVAILABLE ON THE MANUFACTURER'S WEBSITE WWW.VAISTECH.COM

.

!

LICENSING AGREEMENT, DISCLAIMERS AND LIMITED

WARRANTY

VAIS TECHNOLOGY, LLC

18

LICENSE AGREEMENT

VAIS TECHNOLOGY- SoundLinQ3 (SL3i),(SL3x),(SL3s),(SL3B) for U.S.A. (hereinafter referred to as ‘PRODUCT’) and its related software

For Most Toyota/Lexus Vehicles 2001-2009; (hereinafter collectiv ely referred to as ‘PRODUCTS’). THIS IS A LEGAL AGREEMENT

BETWEEN YOU, AS THE END USER, AND VAIS TECHNOLOGY, LLC (“VAIS”). PLEASE CAREFULLY READ THE TERMS AND

CONDITIONS OF THIS AGREEMENT BEFORE USING THE VAIS PRODUCTS. BY USING THE VAIS PRODUCTS AND SOFTWARE

INSTALLED ON THE VAIS PRODUCTS, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. THE AUDIO

INTERFACE CONTROLLER AND THE AUDIO VIDEO INTERFACE CONTROLLER ARE ESSENTIALLY THE BRIDGE BETWEEN A

VEHICLE, ITS EQUIPMENT, AND ANY ‘AFTER-MARKET’ EQUI PMENT SUBSEQUENTLY ADDED TO THE VEHICLE BY THE END-

USER. THE EQUIPMENT SOLD TO YOU, THE END USER, IF PROPERLY INSTALLE D. IS A RESETTABLE TECHNOLOGY, WHICH

WILL, UNDER NORMAL CIRCUMSTANCES, AU TOMATICALLY DISCONNECT IN THE EVENT OF ANY MALFUNCTION. SINCE VAIS

DOES NOT INSTALL THIS EQUIPMENT, VAIS DISCLAIMS AN Y LIABILITY FOR IMPROPER INSTALLATION OF THE VAIS

TECHNOLOGY OR THE ‘AFTER-MARKET’ EQUIPMENT (INPUTS). FURTHER, THE ‘END USER’ ACKNOWLEDGES THAT THE

PRODUCT AND ITS SOFTWARE ARE NOT INHERENTLY DANGEROUS AND DO NO T PROVIDE ANY INHERENT RISKS AND

THEREFORE POTENTIAL DAMAGES TO THE END-USER, OTHER THAN ‘Fitness for its Purpose’.

Some radio receiver models may cause you to experience some technical difficulties, if the product does not operate properly please contact technical department promptly at [email protected]

.

1. GRANT OF LICENSE

VAIS grants to you a non-transferable, non-exclusive license to use the PRODUCT and its software installed on the VAIS product (the

“PRODUCTS”) and the related documentation solely for your own personal use or for internal use by your business, only on such VAIS

PRODUCTS. You shall not copy, reverse engineer, translate, port, modify or make derivative works of the Software contained in t he

PRODUCT. You shall not loan, rent , disclose, publish, sell, assign, lease, sublicense, market or otherwise transfer the Software in the

PRODUCT or use it in any manner not expressly authorized by this agreement. You shall not derive or attempt to derive the source code or structure of all or any portion of the Software in the PRODUCT by reverse engineering, disassembly, recompilation, or any other means. You shall not use the Software in the PRODUCT to operate a service bureau or for any other use involving the processing of data for other persons or entities. VAIS and its licensor(s) shall retain all copyright, trade secret, patent and other proprietary ownership rights to the

Software in the PRODUCT. The PRODUCT S are Copyrighted/ Patented and/or at various stages of Pending and

may not be copied, even if modified or merged with other products. You shall not alter or remove any copyright notice or proprietary legend contained in or on the

PRODUCTS. You may transfer all of your license rights in the Software or the PRODUCT, the related documentation and a copy of this

License Agreement And Warranty to another party, provided that the party reads and agrees to accept the terms and conditions of this

License Agreement And Warranty.

2. OPERATIONAL WARNING AND SAFETY INSTRUCTIONS.

IMPORTANT NOTICE: YOU SHOULD READ AND FAMI LIARIZE YOURSELF THOROUGHLY

WITH THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING THE –

SoundLinQ3 (SL3i), (SL3x), (Sl3s), (SL3B) and its related software (THE “PRODUCTS”).

IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE INSTALLATION

SCHEMATICS/INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS

BEING INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE

THE PRODUCT AND THE VEHICLE AND WILL VOID THE PRODUCT WARRANTY AND MAY

VOID THE VEHICLE WARRANTY. (A copy of the installation schematics is included with the Product and can also be found on the VAIS TECHNOLOGY website at www.vaistech.com.)

FAILURE TO ABIDE BY THESE OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS

COULD RESULT IN SERIOUS BODILY INJURY OR DEATH. IN ADDITION, FAILURE TO

FOLLOW THESE INSTRUCTIONS MAY VOID THE PRODUCT WARRANTY AND COULD

BECOME A BASIS FOR LIABILITY ON THE PA RT OF THE VEHICLE OPERATOR IN THE

EVENT OF AN ACCIDENT WHICH RESULTS IN INJURY TO PERSONS OR PROPERTY.

UNDER NO CIRCUMSTANCES WILL VAIS OR ITS IMMEDIATE AGENTS OR PRINCIPALS,

BE LIABLE, FOR DAMAGES INCURRED TO THE PRODUCTS, THE VEHICLE OR ITS

PASSENGERS, OR OTHER THIRD-PARTIES AS A RESULT OF FAILURE TO FOLLOW

VAIS’S INSTALLATION INSTRUCTIONS.

19

A COPY OF THE ‘OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS’ IS TO BE KEPT

WITH THE VEHICLE AT ALL TIMES.

3.DISCLAIMER AND LIMITATION OF WARRANTIES .

(A)

EXCEPT AS OTHERWISE CONTAINED HEREIN, the PRODUCTS and related documentation are provided to you, “AS IS”. IN NO

EVENT SHALL VAIS BE LIABLE FOR

ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING WITHOUT LIMITATION,

COMPENSATORY, INCIDENTAL, INDIRECT , SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST

SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF

ANY GOODWILL, OR DAMAGES. THE TERM ‘INCIDENTAL DAMAGES’ REFERS TO THE EXPENSES OF TRANSPORTING THE

PRODUCTS TO THE VAIS SERVICE CENTER, LOSS OF THE END-USERS [ORIGINAL PURCHASER’S] TIME, LOSS OF THE USE OF

THE PRODUCT, BUS FARES, CAR RENTALS OR OTHER COSTS RELATED TO THE CARE AND CUSTODY OF THE PRODUCT. THE

TERM ‘CONSEQUENTIAL DAMAGES’ REFERS TO THE COST OF REPAIRING OR REPLACING OTHER PROPERTY, WHICH IS

DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY.) RESULTING FROM THE USE OR INABILITY TO USE THE

PRODUCTS, INCLUDING ANY DAMAGES INCURRED DUE TO THE NEGLIGENT OPERATION OF A MOTOR VEHICLE, IN

CONJUNCTION WITH THE USE OF SAID PRODUCTS. THE END-USER ACKNOWLEDGES ITS RESPONSIBILITY FOR THE USE OF

THE PRODUCT. THE ADDITION OF VAIS PRODUCTS AND ANY AFTER-MARKET EQUIPMENT MAY ENHANCE THE VALUE OF A

VEHICLE OR CAUSE A THIRD-PARTY TO ILLEGALLY ATTEMPT TO REMOVE THE PRODUCTS AND AFTER-MARKET EQUIPMENT.

VAIS DISCLAIMS ANY LIABILITY RELATE D TO SUCH THEFT AND POTENTIAL DAMAGE TO PROPERTY.IT IS THE END-USERS

RESPONSIBILITY TO PROTECT ITS OWN PROPERTY.

THE END-USER FURTHER ACKNOWLEDGES THAT THE OPERATIO N OF A MOTOR VEHICLE IS AN INHERENTLY DANGEROUS

ACTIVITY, AND BY ITS USE OF VAIS’S PRODUCTS, ACKNOWLEDG ES THAT THE PRODUCTS ARE REMOTELY RELATED TO SAID

MOTOR VEHICLE OPERATION, AND THUS ANY DAMAGES CAUSED TO THE DRIVER OF THE VEHICLE, THE VEHICLE ITSELF OR

ANY THIRD-PARTY AND ITS PROPERTY IS NO T THE RESPONSIBILITY OF VAIS, ITS AGENTS OR ITS PRINCIPALS AND IS THE

SOLE RESPONSIBILITY OF THE DRIVER OF SAID VEHICLE.

YOU, THE END-USER, OR ANY OTHER DRIVER OF THE VEHICLE, IS SOLELY RESPONS IBLE FOR THE SAFE OPERATION OF THE

VEHICLE AND THE SAFETY OF BOTH YOU AND THE PASSENGERS . FOR SAFETY PURPOSES, THE PRODUCT SHOULD NOT BE

USED FOR THE DRIVER’S ENTERTAINMENT, WHILE THE VEHICLE IS BEING DRIVEN. SUCH USE COULD BE A DISTRACTION TO

THE DRIVER, WHICH COULD CAUSE AN ACCIDENT LEADING TO SER IOUS INJURY OR DEATH. IF YOU, THE END-USER ALLOW

ANOTHER PERSON TO USE THE VEHICLE, IT IS YOUR RESPONSIBILITY TO THOROUGHLY BRIEF THAT OTHER USER, ON THE

SAFETY REQUIREMENTS FOR OPERATING THE VEHICLE AND THE PR ODUCTS INSTALLED THEREIN.

(B) SAID DISCLAIMERS SHALL APPLY TO THE USE OF SAID PR ODUCTS, EVEN IF VAIS HAS BEEN INFORMED OF, KNEW OF, OR

SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE

AGGREGATE, INCLUDING WITHOUT LIMITATION: BREACH OF CONTRACT, BREACH OF WARRANT Y, NEGLIGENCE, STRICT

LIABILITY, MISREPRESENTATION AND OTHER TORTS. IF VAIS’S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET

FORTH IN THIS AGREEMENT SHALL, OR FOR ANY REASON WHATSOEVER, BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU

AND ANY OTHER END USER AGREE THAT VAI S’S LIABILITY SHALL NOT EXCEED (50%) OF THE PRICE PAID FOR THE ENCLOSED

VAIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty Disclaimer and Limitation of Liability shall not be applicable to the extent that any federal, state or local law, which cannot be preempted, prohibits any provision of this Warranty.

(C) Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a video screen within the sight of the Driver. If you have purchased such a product, you should use the product only in locations where it is legal to do so, and if you do use the product, set up the screen only where it may be visible to passengers only. Although VAIS strongly recomm ends that

Products not be used while the vehicle is in motion, it is your responsibility to determine whether the product can be used in any given location. Any use of the PRODUCTS where it is illegal to do so, may be used against you as evidence of negligence in the event of an auto accident or other traffic infraction.

4. THIRTY (30)- DAY MONEY BACK WARRANTY ONLY IF PURCHASED DIRECT FROM

VAIS.

Any Product purchased directly from VAIS, referencing a

Return Authorization Number (RAN) during the Thirty-(30) day period following shipment by VAIS, may be returned for a full refund of the purchase price actually paid, only if you have received damaged, def ective or incorrectly shipped merchandise. The RAN number may be obtained from

VAIS’s Customer Support at (720) 733-2348, and is valid for only thirty- (30) days from its issuance. Said RAN must be noted on the outside of the returned PRODUCTS’ packaging. The PRODUCTS must be returned in its original packaging, intact, without any evidence of tampering with the PRODUCTS or physical damage caused by the

Customer (End-User).

WE WOULD STRONGLY RECOMMEND THAT THE ITEM BE SHIPPED INSURED, SINCE THE RISK OF LOSS DURING SHIPPING IS

WITH THE END-USER. Re-stocking Fees may apply. Damage Fees if deemed caused by the End-User may apply. SHIPPING AND

HANDLING OF THE END-USER IS NOT REFUNDABLE AND MUST BE PREPAID, FOR THIS WARRANTY TO BE APPLICABLE. END-

USER SHALL ASSUME ALL RISK OF LOSS FOR THE SHIPPING OF THE PRODUCTS TO VAIS.

PLEASE ALLOW UP TO EIGHT (8)

WEEKS FOR VAIS TO CREDIT YOUR ACCOUNT.

20

5. LIMITED WARRANTY.

VAIS warrants that the PRODUCTS will be free from defects in materials and workmanship for a period of ONE (1) YEAR from the date of purchase. VAIS’S sole obligation under this warranty is to repair or replace at VAIS'S option, any PRODUCTS that VAIS shall have determined to be defective. Any replacement of parts, shall at the option of VAIS and at no additional charge to the enduser, be new or rebuilt/re-engineered replacement parts. Any replacement of PRODUCTS shall be with new or remanufactured equivalent PRODUCTS. The End-User is responsible for all shipping costs to VAIS, in connection with warranty service. VAIS will

not be liable for any defects arising out of any modification of the PRODUCTS, or misuse, neglect, improper installation not in accordance with the specifications provided byVAIS, or if the product is used in violation of any applicable local, state or federal laws. It is the End Users responsibility to ascertain the existence and applicability of any local laws to the operation of the PRODUCTS, in any location where the PRODUCTS are being used. other causes beyond Seller's reasonable control.

A. WHO PERFORMS VAIS TECHNOLOGY'S WARRANTY COMPLIANCE.

VAIS Technology’s professional technical depar tment will perform VAIS warranty obligations.

B. WHAT YOU MUST DO.

To obtain warranty performance, you must take the PRODUCTS, or deliver the PRODUCTS freight prepaid, to a VAIS Technology

Authorized Service Center. If shipped, the PRODUCTS must be packaged so that it is protected from possible shipping damage. VAIS

Technology will ship the PRODUCTS to you when warranty performance is completed. VAIS Technology will pay for shipping the

PRODUCTS to you, if the product was repaired under the warranty and the Product was received by the Service Center during the warranty period, in which case the Product will be returned to you freight prepaid by VAIS. You must present to the Service Center, or include with your shipment, a dealer's bill of sale, or other original evidence, showing the date and place of purchase and describing the Product purchased to establish warranty eligibility. Be sure to include your return address and a written description of the problem and a daytime telephone number where you can be reached should the need arise.

SHIP TO: VAIS Technology

13792 Compark Blvd., Unit #125

Englewood, CO

80112

ATTENTION: SERVICE DEPARTMENT

For your own protection, you should obtain a proof of delivery receipt. Return shipping (that is, shipping back to the customer following repair or replacement), will be paid by the Seller unless repair or replacement is determined not to be covered by the warranty.

C. WHAT THE WARRANTY DOES NOT COVER . VAIS shall have no liability or obligation to Purchaser with respect to any

PRODUCTS requiring service during the warranty period which is subjected to any of the following: abuse, improper operation, negligence, accident, modification, improper connections, failure of the end-user to follow the operating procedures outlined both herein, and in any user's manual, attempted repair by non-qualified personnel, Company or Association; operation of the Product outside of the pub lished environmental and electrical parameters, or if such Product's original identification (trademark, serial number) markings have been defaced, altered, or removed. VAIS excludes from warranty coverage Products which have not been sold by VAIS or an Authorized VAIS Deale r to the Purchaser. VAIS also excludes from warranty coverage Products sold outside of the United States.

All wires and connectors furnished with, or as part of the PRODUCTS is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the PRODUCTS.

Other Items Not covered Pursuant to this Warranty:

1.

2.

3.

4.

Damage occurring during shipment of the product to VAIS for repair (claims must be presented to the carrier);

Any cost or expense related to the removal or reinstallation of the product;

Any Products which have been adjusted, altered or modified without VAIS’s consent;

Any Products that has been determined to contain an excessive amount of dust or dirt and any product that contains any other contaminants including liquid or foreign objects.

REPAIR OR REPLACEMENT AS PROVIDED IN THIS WARRANTY IS THE PURCHASER'S EXCLUSIVE WARRANTY REMEDY.

IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR

PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE APPLICABLE PARTS WARRANTY PERIOD AND NO PERSON,

COMPANY OR ASSOCIATION (INCLUDING AUTHORIZED DEALERS) IS AUTHORIZED TO ASSUME FOR VAIS ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.

D. ALL WARRANTIES EXPRESS OR IMPLIED, ARE HEREBY DISCLAIMED BY VAIS, AND ANY SUCH WARRANTY IS DEEMED

VOID, IN THE EVENT THE END-USER ATTEMPTS TO MODIFY THE PRODUCT OR PRODUCTS IN ANY WAY.

In addition, some states, do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights, which may vary, from state to state.

THE ABOVE WARRANTY TERMS AND CONDITIONS ARE VALID ONLY IN

THE U.S.A.

IMPORTANT STEPS TO SAFEGUARD YOUR DATA AND PROPERTY :

Be sure to remove all third-party after market equipment, options, alterations, and attachments not warranted by VAIS Technolog y before sending the Product to VAIS for warranty service.

VAIS IS NOT LIABLE FOR ANY LOSS OR DAMAGE

TO THESE ITEMS.

21

6. OTHER PROVISIONS:

A.

INDEMNIFICATION OF VAIS, ITS AGENTS AND EMPLOYEES . By Purchasing, Installing and Using the Products, You, the End-

User, agree to indemnify, defend and hold harmless, VAIS, and it s Affiliates, Directors, Officers, Agents and Employees from an y Liabilities,

Damage, Loss, Claim and Expense (including reasonable Attorney’s Fees) arising out of the installation and use of the Products.

B.

GOVERNING LAW. THIS AGREEMENT, and all Purchases hereunder shall be governed by, and construed under the laws of the

State of Colorado, without regard to conflicts of law rules. You agree that the Courts of Colorado shall have exclusive jurisdi ction over the

Parties, for all disputes. Venue shall lie exclusively in either: (i) Arapahoe County District Court; or the U.S. District Cour t, District of

Colorado.

C. NOT FOR RESALE NOR EXPORT ASSURANCES . You, the End-User certifies and agrees that the Products are being

Purchased for the End-Users own use, and not for resale. The End-User further agrees that he/she/it will not remove components from

Product for resale, unless he/ she/ it becomes certified as an official dealer of VAIS and enters into the appropriate ‘Distrib ution Agreements’ required by VAIS technology. The End-User further agrees that neither the software, nor any other technical date received from VAIS, nor the direct Product thereof, will be exported outside the United States, except as authorized and as permitted by VAIS and in accordance with the laws and regulations of the United States. If the software or Products rightfully obtained by you outside of the United States, you agree that you will not export the Software, Products, nor other technical data, received from VAIS; except as authorized and as permitted by

VAIS, and in accordance with the laws and regulations of the United States. VAIS and the End-User recognize that violation of t hese provisions will result in damages to VAIS, in a substantial amount, which is not easily determined. If these provision are violated, the End-

User shall be liable to VAIS in the amount of $100/day, as liquidated damages and not as a penalty, commencing with the first d ay in which the end-user violates this provision and ending on the day in which such Products or its parts are recovered by VAIS.

D. FORCE MAJEURE. VAIS Technology shall not be liable for any delay or failure in performance caused by or resulting from acts of

God, fire, flood, storms, earthquakes, tornados, other acts of nature, any accidents, riots, wars, government intervention, embargoes, strikes, labor difficulties, equipment failures, or any other causes beyond the control of VAIS Technology. Quantities are subject to av ailability. In the event of shortage, VAIS Technology may allocate sales and deliveries in its sole discretion.

E. WAIVER

.

Failure of VAIS Technology to insist upon strict performance of any provisions hereof shall not be deemed a waiver of its right and remedies.

F. SEVERABILITY: In the event that any of the provisions, or portions thereof, of this Agreement are held to be unenforceable or invalid by any court or tribunal of competent jurisdiction, the validity and enforceability of the remaining provisions, or portions thereof, shall not be affected thereby, and effect shall be given to the intent manifested by the provisions, or portions thereof, held to be enforceable and valid.

G. CONSTRUCTION

: Throughout this Agreement the singular shall include the plural, and the plural shall include the singular, and masculine shall include the feminine wherever the context so requires.

H. COMPETENCY OF THE PARTIES . Each party is legally competent and fully authorized to execute this Agreement.

I. OPPORTUNITY TO REVIEW AGREEMENT WI TH COUNSEL OF PARTIES OWN CHOOSING . You, the End-User acknowledge that YOU have had every right to consult a licensed attorney, and have done so to the extent of your desires, prior to entering into this

Agreement, and: (a) has fully and carefully read and considered this Agreement prior to its execution; (b) has been sent to, or has had the opportunity to be fully apprised by his or her attorney of the legal effect and meaning of this document and all of its terms a nd conditions; (c) has had the opportunity to make whatever investigation or inquiry he/she deems necessary or appropriate in connection with the subject matter of this Agreement; (d) has been afforded the opportunity to negotiate as to any and all terms of this Agreement; and (e) is executing this Agreement voluntarily, free from any undue influence, coercion, duress or fraud of any kind.

J. BINDING EFFECT: Upon execution, this Agreement shall be binding and fully enforceable, and shall inure to the benefit of the parties hereto, their successors, personal representatives and heirs.

K. NOTICES: All notices, as may be required by this Agreement, shall be sent to the respective parties at the addresses set forth below. Appropriate registered or certified mailing to the parties may modify the place of notice.

L. ENTIRE AGREEMENT. These terms and conditions constitute the entire and exclusive agreement between you, the End-User and

VAIS Technology, concerning the Products, and your purchase hereund er, and supercede all statements or other agreements, whether oral or written, between you and VAIS Technology. No change in this Agreement shall be effective, unless agreed to in writing by bot h, you, the end-user and VAIS.

IF YOU DO NOT AGREE WITH THESE TERMS, PLEASE RETURN

THE VAIS PRODUCTS (INCLUDING THE SOFTWARE* AND ANY

WRITTEN MATERIALS) IN ORIGINAL CONDITION, AND IN

ORIGINAL PACKAGE (INCLUDING SHIPPING BOX, AND ALL

PACKAGING BELONGINGS USED FOR SECURE SHIPPING)

WITHIN FIVE (5) BUSINESS DAYS OF RECEIPT OF THE

PRODUCTS, TO THE PLACE FROM WHICH YOU PURCHASED

THEM, FOR A FULL REFUND OF THE PURCHASE PRICE OF

THE VAIS PRODUCTS.

* VALID FOR SPECIFIC VAIS PRODUCTS ONLY

Owner`s Manual

Owner’s Manual

Bluetooth Interface Adapter for iOS, Android, and other devices with Bluetooth Streaming capabilities.

Before You Start

2

Before You Start

3

Connections

Connecting SoundLinQ3

4

Connections

Connecting SoundLinQ3 to head unit using 20-pin Y-harness

5

Connecting SoundLinQ3 to head unit using 12-pin Y-harness

To Un-plug any connector do NOT pull it by the wires.

Installation

6

Installation

7

Bluetooth Connection

Connecting Android Device to SL3B

Connecting iPod, iPhone, iPad to SL3B

8

Special Feature

9

Head Unit Controls

Source Selection

10

Functionality Description

MD changer emulation

CD changer emulation

Android Devices controls

12

Head Unit Controls

Source Selection

13

Functionality Description

CD-MP3 changer emulation

iOS Device controls

14

Android Device controls

15

Additional iOS Features

16

Additional controls

17

Activate / Deactivate “I Agree” Automatic Bypass Function

LICENSING AGREEMENT, DISCLAIMERS AND LIMITED

WARRANTY

VAIS TECHNOLOGY, LLC

18

LICENSE AGREEMENT

1. GRANT OF LICENSE

2. OPERATIONAL WARNING AND SAFETY INSTRUCTIONS.

19

3.DISCLAIMER AND LIMITATION OF WARRANTIES .

4. THIRTY (30)- DAY MONEY BACK WARRANTY ONLY IF PURCHASED DIRECT FROM

VAIS.

20

5. LIMITED WARRANTY.

21

6. OTHER PROVISIONS:

IF YOU DO NOT AGREE WITH THESE TERMS, PLEASE RETURN

THE VAIS PRODUCTS (INCLUDING THE SOFTWARE* AND ANY

WRITTEN MATERIALS) IN ORIGINAL CONDITION, AND IN

ORIGINAL PACKAGE (INCLUDING SHIPPING BOX, AND ALL

PACKAGING BELONGINGS USED FOR SECURE SHIPPING)

WITHIN FIVE (5) BUSINESS DAYS OF RECEIPT OF THE

PRODUCTS, TO THE PLACE FROM WHICH YOU PURCHASED

THEM, FOR A FULL REFUND OF THE PURCHASE PRICE OF

THE VAIS PRODUCTS.

Related manuals

DeLOCK

65442

Vais Technology

SL3x

Vais Technology

SoundLinq 2 SL2i

Vais Technology

SoundLinQ2 SL2u

**THE VAIS PRODUCTS (INCLUDING THE SOFTWARE* AND ANY**