null  null
THE TERMINAL
B
Mobile Computer
Quick Start Guide
H
D
Insert the Battery
Alphanumeric Keyboard
I
G
The Falcon X3 package includes the following items:
GETTING STARTED
A
J
C
THE PACKAGE
KEYPADS
5
K
1
2
5
Insert the battery with the contacts down and the latch toward the
device main connector. Then press the battery into the device
until the battery latch engages automatically:
D
A
E
L
C
M
F
Charge the Battery
B
A)
B)
C)
D)
Falcon X3 mobile computer
Rechargeable battery pack
Blank keypad overlay
Quick Start Guide/ Wavelink Avalanche Insert/ End User
License Agreement (EULA) Sheet
A)
B)
C)
D)
E)
F)
G)
LEDs
ON/OFF power key
Color display*
Front scan key
Keypad
Microphone
Stylus
H)
I)
J)
K)
L)
M)
Laser safety label
Product label
Color camera/flash (optional)
Loudspeaker
Reset key (under battery)
MicroSD card slot (under
battery)
3
4
Numeric Keyboard
N

O
5
N) Data capture window*
1
2
With Single Slot Dock
5
Do not use the Falcon X3 until batteries are
charged for minimum 4 hours.
O) Handylink connector
(host/client)
CAUTION
* Remove protective film cover before use
3
1.
4
Navigation Keys
Up/down arrows with Yellow Modifier adjusts volume
Up/down arrows with Blue Modifier adjusts backlight
Left with Blue Modifier locks keyboard
Right with Blue Modifier acts as MS Start key
Scan Key
Yellow Modifier
Blue Modifier
Soft Keys
-
822501451 (Rev. B)
2.
3.
4.
5.

The power supply for the Single Slot Dock is included in the Single Slot
Dock box (P/N 94A151125)
SYNCHRONISE YOUR DEVICE WITH THE PC
DATA CAPTURE
Windows Mobile Device Center is only compatible with Windows
Vista and Windows 7; if you run Windows XP or earlier, you have
to download Microsoft ActiveSync.
Laser Data Capture
Imager Data Capture
REFERENCE DOCUMENTATION
For further information regarding Falcon X3 refer to the SDK Help
on-line and to the Falcon X3 User’s Manual.
For information regarding safety and regulatory refer to the
dedicated section of the Falcon X3 User’s Manual.
You can establish a connection to your Falcon X3 through the
following interfaces:

USB either directly or through the Single Dock
PATENTS

RS232 either directly or through the Single Dock

Bluetooth®
This product is covered by one or more of the following patents.
Design Pat.: EP 1,180,673; AU 329,643.
US Pat.: 5,198,649; 5,311,000; 5,440,110; 5,481,098; 5,493,108;
5,686,716; 5,992,740; 6,412,698; 6,415,978; 6,454,168;
6,478,224; 6,513,714; 6,561,427; 6,585,157; 6,808,114 B1;
6,997,385 B2; 7,108,170; 7,387,246 B2.
European Pat.: 789,315 B1; 1,128,315 B1; 1,396,811 B1;
1,413,971 B1.
To establish a partnership between the Falcon X3 and a host PC,
start Windows Mobile® Device Center and follow the steps
below:
1.
2.
3.
4.
5.
Connect the Falcon X3 to the host PC. Windows Mobile®
Device Center configures itself and then opens.
On the license agreement screen, click Accept.
On the Windows Mobile Device Center’s Home screen,
click Set up your device.
Select the information types that you want to synchronize,
then click Next.
Enter a device name and click Set Up.
When you finish the setup wizard, Windows Mobile Device
Center synchronizes the mobile computer automatically.
Microsoft® Office Outlook® emails and other information will
appear on your device after synchronization.
Communicate with Host
NO
NO
OK
OK
OK
Additional patents pending.
OK
OK
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support
through its website.
Please check our website at www.datalogic.com under “Support
& Services”, then “Automatic Data Capture”, and click on the
links indicated for further information including:
-
Downloads
-
Manuals for the latest versions of user manuals and
product guides.
-
Software & Utilities for the latest firmware release for
your product. You can also click on the following link for
direct access to this section:
www.datalogic.com/products_updates.
-
Service Program for warranty extensions and maintenance
agreements.
-
Repair Centers for a list of authorised repair centers.
-
Technical Support Automatic Data Capture email form to
contact our technical support.
WARRANTY TERMS AND CONDITIONS
The warranty period is 1 year for the device and 90 days for
consumables (e.g. battery, power supply, cable etc.) from date of
purchase at our company.
©2010-2014 Datalogic ADC S.r.l. • ALL RIGHTS RESERVED. •
Protected to the fullest extent under U.S. and international laws. •
Copying, or altering of this document is prohibited without express written
consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U.
Falcon and the Falcon logo are registered trademarks of Datalogic ADC
S.r.l. in the U.S.A. and the E.U. All other brand and product names
mentioned herein are for identification purposes only and may be
trademarks or registered trademarks of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement