BMR103
ENGLISH (Original instructions)
INSTRUCTION MANUAL
Radio
BMR103
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
12
13
2 345
14
11
6
7
8
9
10
1
15
A
B
C
D
17
16
18
I
18
H
18
E
G
18
F
1
2
14
18
18
18
18
11
2
3
20
19
22
21
4
5
21
6
21
7
3
21
21
8
9
13
13
10
11
9
10
12
4
ENGLISH (Original instructions)
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and electronic
equipment, 2006/66/EC on batteries and
accumulators and waste batteries and
accumulators and their implementation in
accordance with national laws, electric
equipment and battery pack that have
reached the end of their life must be collected
separately and returned to an
environmentally compatible recycling facility.
Explanation of general view
Controls:
1. iPod/iPhone docking
2. Power/Sleep timer
3. Source button
4. Radio alarm
5. Buzzer alarm
6. Preset stations/Playback buttons
7. Menu/Info button
8. Volume/Tuning control/Select knob
9. DC IN socket
10. AUX IN 1
11. LCD display
12. Handle
13. Soft bended rod antenna
14. Battery compartment locker
15. Speaker
16. Battery compartment (covering main battery pack and
back up batteries)
17. Input terminal (AUX IN 2)
18. Battery compartment (covering main battery pack and
back up batteries)
19. Red indication
20. Button
21. Battery cartridge
22. Supporting bar
LCD display:
A.
B.
C.
D.
E.
F.
G.
H.
I.
Radio alarm
Buzzer alarm
Stereo symbol
Low battery indicator
Clock
Frequency
RDS (Radio data system)
Sleep status
AM/PM for clock
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
1. Read this instruction manual and the charger
instruction manual carefully before use.
2. Clean only with dry cloth.
3. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
4. Only use attachments/accessories specified by the
manufacturer.
5. Unplug this apparatus during lighting storms or when
unused for long periods of time.
6. A battery operated radio with integral batteries or a
separate battery pack must be recharged only with the
specified charger for the battery. A charger that may
be suitable for one type of battery may create a risk of
fire when used with another battery.
7. Use battery operated radio only with specifically
designated battery packs. Use of any other batteries
may create a risk of fire.
8. When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause sparks, burns,
or a fire.
9. Avoid body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is
grounded.
10. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
11. The MAINS plug is used as the disconnect device,
and it shall remain readily operable.
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
4. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
5
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain. A
battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50°C
(122°F).
7. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
iPhone, iPod, iPod classic, iPod shuffle, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
Battery Installation
Note:
Keeping back up batteries inside the compartment
prevent stored data in preset memories from being lost.
1. Pull out the battery compartment locker to release
battery compartment. There are main battery pack
compartment and back up battery compartment.
(Fig. 2 & 3)
2. Remove back up battery compartment cover and
insert 2 fresh UM-3 (AA sizes). Make sure the
batteries are with correct polarity as shown inside the
compartment. Replace the battery cover.
3. After back up batteries are inserted, insert the main
battery pack to power radio. The suitable battery
packs for this radio listed as the following table.
6
The following tables indicate the operating time on a single charge in Radio mode/iPod iPhone mode.
AT SPEAKER OUTPUT =
50mW + 50mW
unit: Hour
Battery Cartridge Voltage
7.2V
9.6V
10.8V
12V
14.4V
18V
BL7010
PA09
PA12
PA14
9050
1250
1450
1850
9100
1200
1420
BL1815
1220
BL1415
9120
BL1013
9100A
1200A
9102
1202
1422
9122
1222
BH1420
9102A
1202A
BH9020
BH1220
BH9020A
BH1200C
9134
1234
In iPhone
mode
APPROX.
5.5
APPROX.
4.0
APPROX.
2.0
APPROX.
7.0
APPROX.
6.0
APPROX.
3.0
APPROX.
11.0
APPROX.
10.0
APPROX.
6.0
APPROX.
14.0
APPROX.
13.0
APPROX.
9.0
APPROX.
15.0
APPROX.
13.5
APPROX.
10.0
APPROX.
16.5
APPROX.
15.0
APPROX.
11.0
APPROX.
18.0
APPROX.
16.5
APPROX.
12.0
1822
1434
1235
In iPod
mode
PA18
1834
BH1427
9135
In Radio or
AUX
1435
1835
1435F
BL1830
1235F
BL1430
BH9033
BH1233
BH1433
BH9033A
BH1233C
Note: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the
type of the battery and the model of iPod/iPhone in use.
: Cluster Battery
: Slide Battery
WARNING:
Do not use two main batteries at the same time.
3-1. Installing or removing Slide battery cartridge (Fig. 4)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
• If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
• Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
• To remove the battery cartridge, withdraw it from the
tool while sliding the button on the front of the cartridge
or pressing the buttons on both sides of the cartridge.
3-2. Installing or removing Cluster battery cartridge
(Fig. 5 - 9)
• Pull the supporting bar to allow the battery to insert to
the terminal.
• To insert the battery cartridge, align the tongue on the
battery cartridge with the grove in the housing and slip
it into place.
• Release the supporting bar.
• To remove the battery cartridge, pull the supporting bar
and take the battery out of the terminal.
4. Return the battery compartment locker to the original
position.
5. Reduced power, distortion and a “stuttering sound” or
low battery sign
that appears on the display are
all the signs that the main battery pack needs to
replace.
Note:
The battery pack can’t be charged via the supplied AC
power adaptor.
6. When low battery sign
WARNING:
Do not use two main batteries at the same time.
appears and an “E” keeps
on flashing is the time to replace the back up batteries.
7
Installing the Soft bended rod
antenna (Fig. 10 & 11)
• FM/AM will flash approx. 10 seconds. Within this
period, only manual tuning is allowed.
Install the Soft bended rod antenna as show in the figure.
Note:
There is a click in the battery compartment designed to
store the removed antenna.
• If volume adjustment is desired while FM/AM is
flashing, press the Tuning control to stop the flash
and you can rotate the Tuning control to adjust
sound level.
4. Rotate the Tuning control
Using Supplied AC power adaptor
(Fig. 12)
Remove the rubber protector and insert the adaptor plug
into the DC socket on the front side of the radio. Plug the
adaptor into a standard mains socket outlet. Whenever
the adaptor is used, the battery pack is automatically
disconnected. The AC adaptor should be disconnected
from the main supply when not in use.
Note:
When your radio has any interference in AM band by its
adaptor, please move your radio away from its AC
adaptor over 30 cm.
and AM frequency will change in steps of 9 kHz.
5. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
6. Use the Tuning control
Presetting stations in AM/FM
mode
2. Press the Source button
to select the desired
waveband. Tune to the required radio station as
1. Press the Power button
to switch on your radio.
2. Press the Source button
to select AM or FM radio
previously described.
3. Press and hold the required Preset button (1 to 5)
until the display shows “P4” for
mode.
3. Press and hold the Tuning control
to carry out an
the remaining presets as you wish.
from the currently displayed frequency and will stop
4. Preset stations which have already been stored may
scanning automatically when it finds a station of
be overwritten by following the above procedure if
sufficient strength.
required.
4. After a few seconds the display will update. The
display will show the frequency of the signal found.
Display modes — FM
5. To find other station, press and hold the Tuning
as before.
6. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
Your radio has a range of display options for FM radio
mode.
1. Repeatedly press the Menu/Info button
to view
the RDS information of the station you are listening to.
7. Rotate the Tuning control to
adjust the sound
level as required.
• While adjusting the volume, make sure the FM/AM
is NOT flashing on the screen.
• If AM/FM is flashing on the screen, it allows you to
tune the stations manually (see the section of
“Manual tuning-AM/FM” for more detail).
8. To switch off your radio press the Power button
.
Manual tuning — AM/FM
1. Press the Power button
to switch on your radio.
2. Press the Source button
to select AM or FM radio
mode.
3. Press the Tuning control
example after the frequency. The station will be stored
using the preset number. Repeat this procedure for
auto-tune. Your radio will scan up the AM/FM band
and you will see the FM
or AM is flashing on the display.
8
to adjust the sound level
as required.
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button
to switch on your radio.
Operating your radio — Scan
tuning AM/FM
control
to tune to a station. The
FM frequency will change in steps of 100 kHz/50 kHz
a. Station name Displays the name if the station being
listened to.
b. Program type Displays the type of station being
listened to such as Pop, Classic, News,
etc.
c. Radio text
Displays radio text message such as
new items etc.
d. Year/Day
Displays the year and day of the week
according to the date setting of your
radio.
e. Date/Day
Displays the date and day of the week
according to the date setting of your
radio.
f. Frequency
Displays the frequency of the FM for
the station listened to.
FM stereo (auto)/mono
2. Press Source button
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Source button
as needed to select the
FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button
to enter the
menu setting.
3. Rotate the Tuning control
until the FM Auto/mono
setting shows on the display. If the setting is Auto
press the Tuning control to switch to Mono mode to
reduce the hiss. Press the Tuning control to select the
option.
Recalling a preset in AM/FM mode
1. Press the Power button
to switch on your radio.
2. Press the Source button
to select AM or FM radio
mode.
3. Momentarily press the required Preset button
to cause your radio to tune to one of
the stations stored in the preset memory.
iPod docking
Your radio has an iPod docking facility which allows you
to play digital audio files and soundtracks held on your
iPod/iPhone directly.
Your radio uses the iPod Universal Dock adjustor
developed for use with iPods and iPhone. Recent models
of iPod/iPhone are supplied with Universal Dock Adapter
inserts which ensure correct alignment of the iPod/iPhone
with the electrical connector.
Important:
The radio does not support iPod 3rd generation (build
2003-2004). To avoid possible damage to your iPod,
do not use your iPod with the product without the
correct adapter fitted to the radio.
Note:
1) All the model listed in the following can be connected
to your radio, but not for iPod shuffle: (1) iPhone 4S
(2) iPhone 4 (3) iPhone 3GS (4) iPod touch 4G
(5) iPod touch 3G (6) iPod nano 6G (7) iPod nano 5G
(8) iPod classic
2) Models listed above have been certified by the
developer to meet Apple performance standards. The
models which are not listed above can also operate
with your BMR103; however, there is no certification
to meet Apple performance standards.
Charging your iPod/iPhone
1. Place the iPod/iPhone onto the Universal Dock
until “iPod” shows on the
display. If you see (battery with thunder) on your iPod
screen, it indicates your radio is charging your iPod’s/
iPhone’s internal battery.
Note:
1) AM does not operate while charging your iPod/iPhone.
2) When the radio is plugged with AC adapter, your iPod/
iPhone can be charged regardless of power on/off of
the iPod/iPhone itself or the radio.
3) When the battery is used as power supply, your iPod/
iPhone can only be charged when the radio is power
on.
Navigating your iPod/iPhone
To navigate your iPod/iPhone menus to make selections
or to change settings, you should use your iPod/iPhone
controls. The radio controls can be used for Menu/Select,
Previous/Next, Fast Rewind/Fast Forward and Play/
Pause functions.
1. Use the Menu/Info button
to navigate to higher
level menus on your iPod/iPhone.
2. Rotate the Tuning control
as required to move up
or down a menu screen on your iPod/iPhone.
3. Press the Tuning control
to select the highlighted
option on your screen menu.
Note:
If this item is a lower level menu item, you may then
navigate further by pressing the Tuning control.
Playing an audio file on your iPod/
iPhone
1. When you have found the desired item, press the
Tuning control
on the radio to start the iPod
playing.
2. Adjust the volume to the required setting using the
Tuning control
on your radio.
• To adjust the volume, you need to make sure the
word “iPod” on the screen is not flashing.
• Press the preset button (1-5) at any point If you
want to cease the word “iPod” from flashing.
3. To pause playback press the Play/Pause button
. To resume playback press the Play/Pause
button
again.
4. iPods do not have a Stop button (they use the Pause
function). To play an alternative selection, use the
iPod menus to make the selection using the Play/
Pause button
to stop playing the current
item if needed.
5. If it was previously playing, your iPod/iPhone will
switch on and continue playing from where it was
previously stopped.
Adjuster into the iPod docking compartment. Press the
Power button
to switch on your radio.
9
Note:
Your BMR103 does not support video file but only music
file.
5. Rotate the Tuning control
to select the desired
year and press the Tuning control
to confirm the
setting. Then rotate the Tuning control
to select
Note:
When Video File List was selected, please press Select
button.
the desired month, and press the Tuning control
Search function
control
1. Press either the Fast-Forward
or Backforward button
to start playing the next or
previous track.
2. While the iPod/iPhone is playing, press and hold the
Fast-Forward
or Back-forward buttons
to move through the current file or track,
the file or track is reached.
to confirm the setting.
Radio Data System (RDS)
When you set the clock time using the RDS function, your
radio will synchronize its clock time whenever it tunes to a
radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data, press
2. Rotate the Tuning control
.
until “RDS CT” and a
clock symbol appear on the display. Press the Tuning
3. To select a desired track among folders, press the
Folder Up/Down button
,
control
to
select a desired track in different folder.
to enter the setting.
3. Rotate the Tuning control
until “RDS CT” appears
on the display. Press the Tuning control
up automatically according to the RDS data received.
4. When the action is completed, the RDS icon will
Setting the time format
The clock display used in stand-by mode and on the
playing mode screens can be set to 12 or 24 hour format.
The selected format is then also used when setting the
alarms.
1. Press and hold the Menu/Info button
to enter the
menu setting.
until “CLOCK xxH”
appears on the display and press the Tuning control
to enter the setting. You will see the time format
begins to flash.
to select either 12 or 24
hour format. Press the Tuning control
to confirm
your choice of clock format.
appear on the LCD display indicating the radio time is
RDS clock time. The radio cock time will be valid for
5 days each time the radio time is synchronized with
RDS CT.
Setting the alarm clock
Your BMR103 has two alarms which can each be set to
wake you to AM/FM radio or buzzer alarm. The alarms
may be set while the unit is in standby mode or while
playing.
a. Setting radio alarm time:
1. The radio alarm can be set either when radio is on or
off.
Note:
If the 12 hour clock format is chosen, the radio will then
use the 12 hour clock for the setting.
2. Press and hold the radio alarm button
Setting the clock time and date
3. During radio alarm symbol
1. Press and hold the Menu/Info button
2. Rotate the Tuning control
.
until “CLOCK ADJ”
appears on the display. Press the Tuning control
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control
to select the desired
hour, and press the Tuning control
setting. Then rotate the Tuning control
to confirm the
to select
the desired minute, and press the Tuning control
to confirm the setting.
4. Rotate the Tuning control
10
to
confirm the setting. The clock time of the radio will set
Clock and Alarms
3. Rotate the Tuning control
to select the desired date and press the Tuning
and hold the Menu/Info button
and then release the button when the desired point in
2. Rotate the Tuning control
to confirm the setting. Then rotate the Tuning control
until “DATE ADJ”
, the
radio alarm symbol and the display hour will flash
along with a beep.
flashes, rotate
Tuning control knob
to select the hour and press
Tuning control knob
again to confirm hour setting.
Then rotate the Tuning control knob
to select the
minute and press Tuning control knob
to confirm
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE - the alarm will sound once
DAILY - the alarm will sound everyday
WEEKDAY - the alarm will sound only on weekdays
appears on the display. Press the Tuning control
WEEKEND - the alarm will sound only at weekends
to enter the setting.
Press the Tuning control
to confirm the setting.
5. During radio alarm symbol is flashing, rotate Tuning
control knob to select desired wake-up band and
station, then press Tuning control knob to confirm the
selection.
6. Rotate Tuning control knob to select the desired
volume and press Tuning control knob to confirm the
volume. Radio alarm setting is now completed.
Note:
If new radio alarm station is not selected, it will select
the last alarm station.
Note:
If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
b. Setting HWS (Humane Wake System) buzzer alarm:
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will sound shorter every 15 seconds for
one minute followed by one minute silence before
repeating the cycle.
1. The buzzer alarm can be set either when the radio is
on or off.
Snooze
1. When the alarm sounds, press any button other than
the Power button will silence the alarm for 5 minutes.
“SNOOZE” will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
to enter the menu
setting.
3. Rotate the Tuning control
until “SNOOZE X”
appears on the display, then press the Tuning control
to enter the setting. Rotate the Tuning control
to adjust the silence time from 5, 10, 15 and
20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
to enter the
Sleep Timer setting. “SLEEP XX” will show on the
2. Press and hold the buzzer alarm button
, the
symbol and the display hour will flash along with a
beep.
display.
2. Keep holding the Power button
and the Sleep
Timer options will start switching on the display. Stop
3. During buzzer alarm symbol
flashes, rotate
Tuning control knob
to select the hour and press
Tuning control knob
again to confirm hour setting.
Then rotate the Tuning control knob
to select the
minute and press Tuning control knob
to confirm
minute setting.
until the desired Sleep Timer setting appears on the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon
will show on the display indicating an active Sleep
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
Timer.
4. To cancel the Sleep Timer function before the preset
The alarm options are as follows:
time has elapsed, simply press the Power button
ONCE - the alarm will sound once
to turn the unit off manually.
DAILY - the alarm will sound everyday
WEEKDAY - the alarm will sound only on weekdays
WEEKEND - the alarm will sound only at weekends
Press the Tuning control
to confirm the setting.
Note:
There is no volume adjustment for buzzer alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Loudness
You can get compensation on lower and higher frequency
for your BMR103 by adjusting the loudness function.
1. Press and hold the Menu/Info button
to enter the
menu setting.
2. Rotate the Tuning control
until “LOUD ON” or
“LOUD OFF” appears on the display. Press the
Tuning control
to enter the setting.
3. Rotate the Tuning control to
choose ON to turn on
the loudness function, then press the Tuning control
Disabling/cancelling alarms
To disable an active alarm, either press the Power button
, or press and hold the corresponding alarm button to
cancel the alarm.
to confirm the setting.
4. To turn off the loudness function, select OFF and
press the Tuning control
to confirm the setting.
11
Auxiliary input socket
Two 3.5 mm stereo Auxiliary Input sockets are provided.
One is at the font of your radio; the other is AUX IN 2 is
located in the battery compartment.
1. Repeatedly press and release the Source button
until AUX IN 2 is displayed.
2. Connect an external audio source (for example, iPod,
MP3 or CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD
player to ensure an adequate signal level from the
player, and then use the Tuning control
on the
radio as needed for comfortable listening.
MAINTENANCE
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Specifications:
Power Requirements
AC power adaptor
DC12 V/1200 mA, center pin
positive
Battery
UM-3 (AA size) x 2 for back up
Cluster battery: 7.2 V - 18 V
Slide battery: 9.6 - 18 V
Frequency coverage FM 87.50 - 108 MHz
(0.05 MHz/step)
AM (MW) 522 - 1629 kHz
(9 kHz/step)
Circuit feature
Loudspeaker
Output Power
3 inches 8 ohm
7.2 V: 0.5 W x 2, 9.6 V: 1 W x 2,
10.8 V:1.2 W x 2, 12 V: 1.5 W x 2,
14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2
Input terminal
3.5 mm dia. (AUX IN1/AUX IN2)
Antenna system
FM: soft bended rod antenna
AM: bar antenna
Dimension (W x H x D) in mm
280 x 302 x 163
Weight
4.2 kg (without battery)
Makita Corporation
Anjo, Aichi, Japan
BMR103-ENEU-0812
ALA
12
www.makita.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising