Mitsubishi Electric DT851 User`s manual

Add to My manuals
44 Pages

advertisement

Mitsubishi Electric DT851 User`s manual | Manualzz

52" LCD Display Monitor

USER’S MANUAL

BEDIENERHANDBUCH

MANUAL DEL USUARIO

MANUEL UTILISATEUR

MANUALE UTENTE

GEBRUIKERSHANDLEIDING

Index

Important Information ................................................................................................................................... English-2

Safety Precautions, Maintenance & Recommended Use ........................................................................... English-4

Contents ....................................................................................................................................................... English-5

Parts Name and Functions .......................................................................................................................... English-6

Buttons, Switch, and Indicator ....................................................................................................... English-6

Connectors and Terminals .............................................................................................................. English-7

Wireless Remote Control ............................................................................................................... English-8

< Operating Range for the Remote Control > ........................................................................... English-9

< Handling the remote control > ............................................................................................... English-9

CAT5 Tx BOX .................................................................................................................................. English-9

Setup Procedure .......................................................................................................................................... English-10

CAT5 video connection ................................................................................................................... English-12

How to Mount and Attach Options to the LCD Monitor ............................................................................... English-14

Connections ................................................................................................................................................. English-15

Connecting a Personal Computer .................................................................................................. English-16

Connecting with Digital Interface Equipment ................................................................................ English-17

Connecting a DVD Player with component out/HDMI out/DVI out ................................................ English-18

Connecting to a VCR/Stereo Amplifi er ........................................................................................... English-19

Basic Operation ............................................................................................................................................ English-20

Power ON and OFF Modes ............................................................................................................ English-21

Using Power Management ............................................................................................................ English-21

Selecting a video source ................................................................................................................ English-21

Audio Source Switching ................................................................................................................. English-21

OSD (On-Screen-Display) Controls .............................................................................................................. English-23

PICTURE IN PICTURE .................................................................................................................... English-27

< IMAGE PERSISTENCE > ....................................................................................................... English-32

< For long life use of Public Display > ...................................................................................... English-32

< HOW TO SETUP SCHEDULE > ............................................................................................. English-32

< PIP, POP and SIDE BY SIDE > ............................................................................................... English-33

< Supplemental information of the auto brightness function > ................................................ English-33

< Remote control numbering function > ................................................................................... English-34

Controlling the LCD monitor via RS-232C/RS-485 Remote Control .......................................................... English-35

Features ........................................................................................................................................................ English-37

Troubleshooting ............................................................................................................................................ English-38

Specifi cations .............................................................................................................................................. English-40

Pin Assignment ............................................................................................................................................ English-41

English-1

Important Information

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc.

We hereby declare that the equipment specifi ed above conforms to the technical standards as specifi ed in the FCC Rules.

Windows is a registered trademark of Microsoft Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners.

HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No.

60950-1.

FCC Information

1. Use the attached specifi ed cables with the MDT521S (DT851) color monitor so as not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC compliance.

(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to 15-pin mini D-SUB.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may fi nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce,

Washington, D.C., 20402, Stock No. 004-000-00345-4.

English-2

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS

UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE

FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM

WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE

POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION

This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For US only).

Declaration

Declaration of the Manufacturer

We hereby certify that the color monitor

MDT521S (DT851) is in compliance with

Council Directive 2006/95/EC:

– EN 60950-1

Council Directive 2004/108/EC:

– EN 55022

– EN 61000-3-2

– EN 61000-3-3

– EN 55024 and marked with

Mitsubishi Electric Corporation

2-7-3, Marunouchi,

Chiyoda-Ku

Tokyo 100-8310, Japan

Declaration of the Manufacturer

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and

Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

English-3

Safety Precautions, Maintenance & Recommended Use

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE LCD COLOR MONITOR:

DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.

Refer all servicing to qualifi ed service personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fi re or

• Do not place any heavy objects on the power cord.

Damage to the cord may cause shock or fi re.

• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

• When operating the LCD monitor with an AC 100-120V power supply in North America, use a power supply cord provided with this monitor.

• When operating the LCD monitor with an AC 220-240V power supply in Europe, use a power supply cord provided with this monitor.

• In UK, use a BS-approved power cord with molded plug having a black (10A) fuse installed for use with this

monitor.

If a power cord is not supplied with this monitor, please contact your supplier.

• When operating the LCD monitor with a 220-240V AC power supply in Australia, use the power cord provided with this monitor.

If a power cord is not supplied with this monitor, please contact your supplier.

• For all othercase, use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

• Do not place any objects onto the monitor and do not use the monitor outdoors.

• The inside of the fl uorescent tube located within the LCD monitor contains mercury. Please follow the laws or rules of your municipality to dispose of the tube properly.

• Do not bend power cord.

• Do not use monitor in high temperature, humid, dusty, or oily areas.

• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

• Allow adequate ventilation around the monitor, so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources.

Do not put anything on top of the monitor.

• The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet, which is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

• Please clean the holes of back cabinet to reject dirt and dust at least once a year because of set reliability.

• If using the cooling fan continuously, it’s recommended to wipe holes a minimum of once a month.

• When installing the remote control batteries;

- Align the batteries according to the (+) and (-) indications inside the case.

- Align the (-) indication of the battery fi rst inside the case.

CAUTION:

Immediately unplug your monitor from the wall outlet and refer servicing to qualifi ed service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following

Recommended Use

CAUTION:

• For optimum performance, allow 20 minutes for warm-up.

• Rest your eyes periodically by focusing on an object at least 5 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to minimize glare and refl ections.

• Clean the LCD monitor surface with a lint-free, nonabrasive cloth. Avoid using any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness, contrast and sharpness controls to enhance readability.

• Avoid displaying fi xed patterns on the monitor for long periods of time to avoid image persistence (after image effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomic benefi ts, we recommend the following:

• Use the preset Size and Position controls with standard signals.

• Use the preset Color Setting.

• Use non-interlaced signals.

• Do not use primary color blue on a dark background, as it is diffi cult to see and may produce eye fatigue due to insuffi cient contrast.

English-4

Contents

Your new MDT521S monitor box* should contain the following:

• Power Cord (3 m)

• Video Signal Cable (4 m)

• User’s Manual

• Wireless Remote Control and AAA Batteries

• Clamper x 2 (To prevent from falling)

• Clamper x 3 (For securing cables)

• Clamper x 2 (For securing the power cord and HDMI cable)

• Screw for Clamper (To prevent from falling) x 2

• CAT5 Tx BOX

• CD-ROM

52" LCD Display Monitor

USER’S MANUAL

BEDIENERHANDBUCH

MANUAL DEL USUARIO

MANUEL UTILISATEUR

MANUALE UTENTE

GEBRUIKERSHANDLEIDING

User’s Manual Video Signal Cable

(D-SUB to D-SUB Cable)

Screw for Clamper

(M4 x 8) x 2

Clamper x 3

(For securing cables)

Clamper x 2

(For securing the power cord and HDMI cable)

* The supplied power cord varies depending on destination.

Clamper x 2

(To prevent from falling)

CAT5 Tx BOX

For EU

For North

America

Power cord

* For all other case, use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

CD-ROM

* Remember to save your original box and packing material to transport or ship the monitor.

The following components are prepared as option.

• Stand

English-5

Wireless Remote Control and AAA Batteries

Parts Name and Functions

Buttons, Switch, and Indicator

ON

OFF

Remote control sensor and Power indicator

Receives the signal from the remote control (when using the wireless remote control). See also page 9.

Glows green when the LCD monitor is in active and glows red when the LCD is in POWER OFF mode. When the LCD is in power save mode, it will glow both green and red. When

SCHEDULE is enabled, it willl blink green and glow red. See page 21. In the case of where a failure is detected, it will blink red.

POWER button ( )

Switches the power on/off. See also page 20.

MUTE button

Switches the audio mute ON/OFF.

INPUT button

Acts as SET button with OSD menu.

(Toggle switches between [RGB1], [RGB2], [RGB3], [RGB4],

[RGB5], [DVD/HD], [VIDEO<S>] and [VIDEO] .)

PLUS (+) button

Acts as (+) button to increase the adjustment with OSD menu.

Increase the audio output level when the OSD menu is turned off.

MINUS (-) button

Acts as (-) button to decrease the adjustment with OSD menu.

Decreases the audio output level when the OSD menu is turned off.

UP ( ) button

Activates the OSD menu when the OSD menu is turned-off.

Acts as button to move the highlighted area up to select the adjustment with OSD menu.

DOWN ( ) button

Activates the OSD menu when the OSD menu is turned-off.

Acts as button to move the highlighted area down to select the adjustment with OSD menu.

EXIT button

Activates the OSD menu when the OSD menu is turned-off.

Acts as EXIT button to move to previous menu with OSD menu.

Brightness sensor (front, rear)

Sensor for the auto brightness function.

This function controls the screen brightness depending on the ambient light for easy viewing.

In addition, it changes the screen brightness depending on the ambient light and what are displayed on the screen to reduce power consumption as low as possible. See page 25,

33.

Main Power Switch

On/Off Switch to turn main power on/off.

NOTE: Control Key Lock Mode

This control completely locks out access to all Control Key functions. To activate the control key lock function, press both of “ ” and “ ” and hold down simultaneously for more than 3 seconds. To resume back to user mode, press both of

“ ” and “ ” and hold simultaneously for three (3) seconds.

English-6

Connectors and Terminals

(OUT)

(IN)

(OUT)

(IN)

(OUT)

(IN)

(IN)

(IN)

CAT5 input/output connectors (RJ-45)

The IN (RGB5 IN) connector is for connecting the CAT5

Tx BOX or the CAT5 OUT connector of a multi-connected

MDT521S.

The OUT connector is for connecting the CAT5 (RGB5) IN connector of a multi-connected MDT521S.

EXTERNAL CONTROL (mini D-Sub 9 pin)

Connect the IN connector with the RS-232C OUT connector of the computer or a multi-connected MDT521S monitor.

Connect the OUT connector with the RS-232C IN connector of a multi-connected MDT521S monitor.

VIDEO IN/OUT

VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA are not available at the same time. (Use only one input).

VIDEO OUT connector (BNC): To output the composite video signal from VIDEO IN connector.

S-VIDEO IN connector (MINI DIN 4 pin): To input the

S-video (Y/C separate signal).

RGB 4 / DVD/HD IN (BNC)

To input the analog RGB signals from a computer or other

RGB equipment.

Connecting equipment such as a DVD player, HDTV device, or Laser disc player.

AC IN connector

Connects with the supplied power cord.

EXTERNAL SPEAKER TERMINAL

To output the audio signal for external speakers from AUDIO 1,

2, 3 jack or HDMI.

AUDIO OUT

To output the audio signal from the AUDIO IN 1, 2, 3 jack or

HDMI.

AUDIO IN 1, 2, 3

To input the audio signal from external equipment such as a computer, VCR or DVD player.

RGB 1 IN (HDMI)

To input the digital RGB signals from a computer.

* This connector does not support analog input.

AUDIO is supported via HDMI.

RGB 2 IN (DVI-D)

To input the digital RGB signals from a computer.

* This connector does not support analog input.

AUDIO is supported via DVI-D.

RGB 3 IN (mini D-Sub 15 pin)

To input the analog RGB signals from a computer or other

RGB equipment.

RGB OUT (mini D-Sub 15 pin)

To output the signal from RGB 3, 4 or 5 IN.

English-7

Wireless Remote Control

POWER button

Switches the power on/off.

* If LED Power Indicator on the monitor is not glowing, then no controls will work.

INPUT button

Selects from input signal, [RGB1] (HDMI), [RGB2] (DVI-D),

[RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [DVD/HD]

(YPbPr), [VIDEO<S>] and [VIDEO].

PICTURE MODE button

Selects from picture mode, [HIGHBRIGHT], [STANDARD],

[sRGB], [CINEMA]. See page 21.

HIGHBRIGHT: for moving image such as Video

STANDARD: for images (Factory setting)

sRGB: for text based images

CINEMA: for movies.

DISPLAY button

To switch the information OSD on/off. See page 22.

SET button

Acts as SET button with OSD menu.

MINUS button decrease

Acts as (-) button to decrease the adjustment with OSD menu.

Small screen which adjusted “PIP” mode moves left.

AUTO SETUP button

To enter the auto setup menu. See page 28.

AUDIO INPUT button

Press to change the audio source for each video source. The audio source is changed from [AUDIO1] to [AUDIO2], [AUDIO3] and [HDMI] in order. Note that you cannot select the audio source for [VIDEO<S>] or [VIDEO]. [HDMI] is selectable only when the video source is [RGB 1] and [RGB 2].

PIP (Picture In Picture) button

ON/OFF button: PIP-ON/OFF. See page 27.

INPUT button: Select the “picture in picture” input signal.

CHANGE button: Replaces to the main picture and sub picture.

Note:

The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”.

STILL button

ON/OFF button: To switch the still picture mode on/off.

CAPTURE button: Updates the still picture.

SIZE button

Selects picture size, [FULL], [NORMAL], [CUSTOM] , [DY-

NAMIC] and [REAL]. See page 21.

MENU button

To switch the menu mode on/off.

UP button

Acts as button to move the highlighted area up to select the adjustment with OSD menu.

Small screen which adjusted “PIP” mode moves up.

PLUS button increase

Acts as (+) button to increase the adjustment with OSD menu.

Small screen which adjusted “PIP” mode moves right.

EXIT button

Turn to previous menu with OSD menu.

DOWN button

Acts as button to move the highlighted area down to select the adjustment with OSD menu.

Small screen which adjusted “PIP” mode moves down.

MUTE button

To switch the mute function on/off.

VOLUME button

Increases or decreases the audio output level.

English-8

CAT5 Tx BOX

< Operating Range for the Remote

Control >

Point the top of the remote control toward the LCD monitor's remote sensor during button operation.

Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3 m/10 ft.

30° 30°

CAUTION:

Important, the remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the LCD monitor, or when there is an object in the path.

< Handling the remote control >

* Do not subject to strong shock.

* Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.

* Avoid exposure to heat and steam.

* Other than to install the batteries, do not open the remote.

USB (B type)

Connected to the USB connector (A type) of the computer.

CAUTION:

We have checked the operation of the USB connector by connecting it with our computers according to the USB standards.

When the CAT TX5 BOX is combined with your computer system or USB hub system, check in advance that it operates properly.

EXTERNAL CONTROL IN (mini D-Sub 9 pin)

Connected to the RS-232C OUT connector of the computer.

Note:

RS-232C connection isn’t necessary when the COM port number set by the USB driver is used. Make selection using the input select switch (USB/RS-232C), as necessary.

RGB IN (mini D-Sub 15 pin)

To input the analog RGB signals from other monitor.

RGB OUT (mini D-Sub 15 pin)

To output the analog RGB signals from a computer.

Input select switch (USB/RS-232C)

Switches the control input between the USB connector and the RS-232C connector.

CAT5 OUT (RJ-45)

Connected to the CAT5 (RGB5) IN connector of MDT521S.

Composite sync signal level switch

Switches the composite sync signal level.

The TTL level and the 0.3V level are switched.

Auxiliary power supply input connector (DC IN

5 V)

Though the power is supplied from the above-mentioned

USB connector, an auxiliary DC power adopter (commercially available) is also available. Power can be drawn from the USB connector and the auxiliary power supply at the same time.

CAUTION:

The auxiliary power supply input connector isn’t intended for general use. Commercial DC power connectors are available in different shapes. When you want to use this connector, consult a qualifi ed electrician in advance.

English-9

Setup Procedure

1. Determine the installation location

CAUTION:

DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY

YOURSELF.

Installing your LCD display must be done by a qualifi ed technician. Contact your dealer for more information.

CAUTION:

MOVING OR INSTALLING THE LCD MONITOR MUST BE

DONE BY TWO OR MORE PEOPLE.

Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION:

Do not mount or operate the display upside down, face up, or face down.

CAUTION:

Do not install the LCD monitor where it will be exposed to direct sunlight, as this will result in display defects.

CAUTION:

This LCD has a temperature sensor and cooling fan. If the

LCD becomes too hot, the cooling fan will turn on automatically. If the LCD becomes overheated and the cooling fan is running, the “Caution” menu will appear. If the “Caution” menu appears, discontinue use and allow the unit to cool.

When the LCD monitor is used in an enclosure or with protection on LCD surface, please check the inside temperature of monitor by “HEAT STATUS” (See page 31). The temperature is too hot than normal condition, please set “cooling fan” to ON on SCREEN SAVER function (See page 28).

IMPORTANT:

Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Installing and removing the remote control batteries

The remote control is powered by 1.5V AAA batteries.

To install or replace batteries:

How to install the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Align the batteries according to the (+) and (–) indications inside the case.

3. Replace the cover.

• Place “AAA” batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes shorter battery life or leakage of batteries.

• Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment. Don't touch exposed battery acid, it cause damage to your skin.

NOTE:

If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment

• To protect the connected equipment, turn off the main power before making connections.

• Refer to your equipment user manual.

4. Connect the supplied power cord

• The power outlet socket should be installated as near to the equipment as possible, and should be easily

accessible.

• Fully insert the prongs into the power outlet socket.

Loose connection may cause noise.

NOTE:

Please refer to “Safety Precautions, Maintenance &

Recommended Use” section of this manual for proper selection of AC power cord.

Clamper

Use the clamper to secure the cable firmly.

How to remove the batteries

1. Unlock and pull up the cover in the arrow’s direction.

2. Remove the batteries.

CAUTION:

Incorrect use of batteries can result in leaks or bursting.

Be careful especially about the following points.

5. Switch on the power of all the

attached external equipment

When connected with a computer, switch on the power of the computer fi rst.

English-10

6. Operate the attached external equipment

Display the signal on the external equipment you wish.

7. Adjust the sound

Make adjustments lowering or rising the volume as required.

8. Adjust the screen (See pages 24-34)

Make adjustments to the display position or settings if required.

9. Adjust the image (See page 24-34)

Make adjustments to brightness or contrast if required.

10. Recommended Adjustment

To reduce the risk of “image persistence”, please adjust the following items based on the application being used.

“POWER SAVE” (See page 28), “SCREEN SAVER” (See page 28), “SIDE BORDER COLOR”(See page 28), “DATE

AND TIME” (See page 31), “SCHEDULE”(See page 31).

11. Installing and removing the stands

The stands are prepared as option.

Refer to the user’s manual of the stand for more information.

How to install the stands

1. Please turn monitor off.

2. Fasten screws on both sides of the monitor.

NOTE:

Install the stands so that their longer portions come to the front.

How to remove the stands

1. Spread the protective sheet on the fl at surface, such as a desk.

2. Place monitor on the protective sheet.

3. Remove screws with a screwdriver and place them in a safe place for reuse.

12. Connecting HDMI cable

Clamper

Use the clamper to secure the cable firmly.

Stands

(Longer portion comes to the front.)

Screws

English-11

13. When MDT521S is installed in portrait position

Conditions

MDT521S can be installed in portrait position, under the following conditions:

Caution:

Portrait position is effective only when wall-mounted or ceiling-mounted.

The stands(legs) can not be fi tted to the monitor in portrait position.

Placing the monitor in portrait position, will shorten the average life of the LCD backlight.

Operational Environment (Temperature) shall be limited, as shown below:

Operational Environment:

Temperature 5 - 35 °C / 41 - 95 °F

Humidity 20 - 80 % (without condensation)

Please orientate the monitor in the direction shown below:

Do not place monitor in landscape in any other manner.

Optional speakers (SP-521S) can not be attached when this

LCD monitor is installed in portrait position.

How to set-up

The “ facing the monitor.

” logo should be on the LEFT side when

Clockwise

90°

Landscape

Counterclockwise

90°

CAT5 video connection

The CAT5 video connection function is for transmitting the analog RGB video signal of the computer and the control signal of the monitor over a long distance using CAT5 cables.

The computer can control the monitor via the supplied CAT5

Tx BOX.

Caution:

Never connect network devices (such as a hub and a computer for LAN) to the CAT5 Tx BOX and the IN and OUT connectors of the monitor. If they are connected, the network devices themselves, CAT5 Tx BOX, and monitor may be damaged.

1. Installation of the USB driver for CAT5 serial communication control

To connect the computer and the CAT5 Tx BOX via USB interface, it is necessary to install the USB driver to the computer from the CD-ROM supplied with the monitor.

(When connecting the computer and the CAT5 Tx BOX via

RS-232C interface, you don’t have to install the USB driver.)

OS supported: Windows XP, Windows Vista

®

How to install:

1) Installation to Windows XP

Start the “PL2303-Driver_XP2K_v ****** .exe” fi le in the

Windows XP folder on the CD-ROM supplied with the monitor and install the driver according to the instructions displayed on the screen.

2) Installation to Windows Vista

®

Start the “PL2303_Prolifi c_Vista_

******

.exe” fi le in the

Windows VISTA folder on the CD-ROM supplied with the monitor and install the driver according to the instructions displayed on the screen.

2. Connection of the CAT5 video connection function

There are two cases of connection.

1) Connection to one monitor

USB cable

Computer

CAT5 cable

CAT5 Tx BOX

(supplied)

Monitor

VGA (mini D-SUB 15-pin) cable (supplied)

1. Connect the USB connector of the supplied CAT5 Tx BOX and that of the computer using a commercially available

USB cable. (When the USB driver isn’t available, connect an RS-232C cable in addition to the USB cable. In this case, the USB cable serves for supplying the power to the

CAT5 Tx BOX.)

English-12

2. Connect the D-SUB input connector of the CAT5 Tx BOX and the VGA (D-SUB) output connector of the computer using the signal cable (mini D-SUB 15-pin cable) supplied with the monitor.

3. Connect the RJ45 connector of the CAT5 Tx BOX and the

CAT5 (RGB5) IN connector of the monitor using a commercially available CAT5 cable.

2) Connection to multiple monitors

USB cable

Computer

CAT5 cable

CAT5 Tx BOX

(supplied)

Monitor

2) CAT5 EQ

Make adjustment so that blur and smear of the displayed letters and graphic objects are minimized.

3) CAT5 R-GAIN/G-GAIN/B-GAIN

When the displayed image is dark, increase each value.

When whites aren’t displayed as intended, adjust the R-GAIN and B-GAIN values.

4) CAT5 R-SKEW/G-SKEW/B-SKEW

Adjust each value so that the color deviation in the displayed letters and graphic objects is minimized.

VGA (mini D-SUB 15-pin) cable (supplied)

CAT5 cable

Monitor

1. In addition to the connection made step 1) above, connect the CAT5 OUT connector of the fi rst monitor and the

CAT5 (RGB5) IN connector of the second monitor using a commercially available CAT5 cable.

2. Connect the third and later monitors in the same way.

You can connect up to 5 monitors.

Allowable cable length

Connection

One monitor

Multiple monitors

Max. cable length/signal timing

150 m / 1920 x 1080 @60 Hz

200 m / 1920 x 1080 @60 Hz

(Total length of the connected cables)

The lengths given above are based on the actual measurements using our standard signal source and the recommended cable as follows. Before installation, check the monitor operation in advance by connecting it with your computer and cables.

Recommended cable:

1700A 4pair DATATWIST 350MHz cable (24AWG, CAT5E) made by BELDEN

3. Various settings involved in the CAT5 video connection

In the case of the CAT5 video connection, confi gure the following settings displayed on the OSD screen. (See page 29.)

1) CAT5 CABLE LENGTH

Select the cable length, and the defaults of all the adjustment values are automatically determined.

Select the length that is closest to the actual length of your cable.

English-13

How to Mount and Attach Options to the LCD Monitor

You can attach mounting accessories to the LCD monitor in one of the following two ways:

1. In the upright position

3. Ventilation Requirements for enclosure mounting

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

2. Lay the screen face down

Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.

This device cannot be used or installed without the Tabletop

Stand or other mounting accessory. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

Failure to follow these recommendations could result in voiding your warranty.

Use M8 screws (having a length 15 mm longer than the thickness of the mounting bracket) and tighten them securely.

Prevent the screws from loosening using spring washers, etc. MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.

601 601

200 200

4. To avoid monitor from falling

When installing the monitor using the tabletop stands (optional), take measures to prevent the monitor from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall.

As shown in the fi gure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor. (MDT521S: approx. 44 kg (with the optional stands))

When you use screw hooks (commercially available), ring screw hooks, not C-shaped screw hooks (with opening), are recommended.

400 mm

Screw Holes

Screw hook, etc. commercially available

Clamper

Rope, etc. commercially available

Screw

Protective sheet

(mm)

Table Handles

Caution:

For preventing the monitor from falling.

• Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed procedures of installation, refer to the instructions of the metal brackets.

• To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.

• To lessen the risk of falling of the monitor, thread commercially available rope through the handles at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount brackets.

• Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

Caution:

• The effectiveness of preventing from falling substantially depends on the strength of brackets and base to which prevention device from falling is attached. When you cannot ensure suffi cient strength, provide adequate

reinforcement.

• Though the recommended prevention from falling is intended to lessen the probability of injury and damage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.

• Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

• Before moving the monitor, remove the rope that is securing the monitor. Failure to do so may result in injury or breakdown of the monitor.

English-14

Connections

Before making connections:

* First turn off the power of all the attached equipment and make connections.

* Refer to the user manual included with each separate piece of equipment.

Wiring Diagram

Monitor LCD monitor (second monitor)

Personal computer

(analog RGB)

Personal computer

(DVI-D)

DVD player

(HDMI)

VCR

(RCA)

Stereo amplifier

External speaker

English-15

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.

Some video cards may not display an image correctly.

Connect the LCD Monitor to a Personal Computer

• To connect the RGB 3 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini

D-sub 15 pin to mini D-sub 15 pin).

Select RGB 3 from the INPUT button on the LCD monitor or D-SUB button on the remote control.

• To connect the RGB 4 IN connector (BNC) on the LCD monitor, use a signal cable which is available separately (mini D-sub

15 pin to BNC x 5).

Select RGB 4 from the INPUT button on the LCD monitor or BNC button on the remote control.

• When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin).

• The AUDIO IN 1, 2, 3 can be used for audio input. For connection, select AUDIO 1, 2, 3 from the AUDIO INPUT button.

• The AUDIO OUT jack outputs sound from the selected Audio input.

Monitor PC or IBM compatible

To RGB output

Mini D-sub 15 pin

To audio output

BNC x 5

Mini D-sub 15 pin

RCA

RCA

LCD monitor (second monitor)

Mini D-sub 15 pin

English-16

Connecting with Digital Interface Equipment

Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual

Interface) standard.

Connect the LCD Monitor to a Computer with a Digital Output

• To connect the RGB 2 IN connector (DVI-D) on the LCD monitor, use a DVI-D cable.

Select RGB 2 from the INPUT button on the LCD monitor or DVI-D button on the remote control.

Select the “DVI INPUT MODE” to “DVI-PC“. (See page 31)

• To connect the RGB 1 IN connector (HDMI) on the LCD monitor, use a HDMI cable.

Select RGB 1 from the INPUT button on the LCD monitor or HDMI button on the remote control.

Select the “HDMI INPUT MODE” to “HDMI-PC“. (See page 31)

• The AUDIO IN 1, 2, 3 or HDMI can be used for audio input. For connection, select AUDIO 1, 2, 3 or HDMI from the AUDIO

INPUT button. You can select HDMI only when RGB 1 or 2 is selected.

• The signal input from DVI-D and HDMI connector cannot be output to the RGB OUT connector.

Monitor

PC or IBM compatible

To RGB output

DVI-D

To audio output

DVI-D

HDMI

PC or IBM compatible

To audio output

HDMI

To RGB output

English-17

Connecting a DVD Player with component out / HDMI out / DVI out

Connecting your DVD player to your LCD monitor will enable you to display DVD video.

Refer to your DVD player owner’s manual for more information.

Connect the LCD Monitor to a DVD Player

• To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).

Select DVD-HD from the INPUT button on the LCD monitor or YPbPr button on the remote control.

• To connect the RGB 1 IN connector (HDMI) on the LCD monitor, use a HDMI cable.

Select RGB 1 from the INPUT button on the LCD monitor or HDMI button on the remote control.

Select the “HDMI INPUT MODE” to “HDMI-HD“. (See page 31)

• To connect the RGB 2 IN connector (DVI-D) on the LCD monitor, use a DVI-D cable.

Select RGB 2 from the INPUT button on the LCD monitor or DVI-D button on the remote control.

Select the “DVI INPUT MODE” to “DVI-HD“. (See page 31)

• The AUDIO IN 1, 2, 3 or HDMI can be used for audio input. For connection, select AUDIO 1, 2, 3 or HDMI from the AUDIO

INPUT button. You can select HDMI only when RGB 1 or 2 is selected.

Monitor

BNC-RCA adapter

DVD Player

BNC x 3

To video output

To audio output

L

To audio output

R

RCA

BNC x 3

RCA

DVI-D HDMI

DVD Player

DVI-D or DVI-I

To DVI-D or DVI-I output

HDMI

DVD Player

To HDMI output

English-18

Connecting to a VCR / Stereo Amplifi er

You can connect your VCR / stereo amplifi er to your LCD monitor. Refer to your VCR / stereo amplifi er owner's manual for more information.

Connect the LCD Monitor to a VCR / Stereo Amplifi er

• To connect the VIDEO IN connector (RCA, BNC or S-VIDEO) on the LCD monitor, use a video cable or S-video cable. Use a separately available RCA cable or S-video cable.

To connect the AUDIO IN connector (RCA) on the LCD monitor, use an RCA cable.

When connect the RCA or BNC connector, select VIDEO from the INPUT button on the LCD monitor or VIDEO button on the remote control.

When connect the S-VIDEO connector, select VIDEO<S> from the INPUT button on the LCD monitor or VIDEO(S) button on the remote control.

• Turn on the LCD monitor and the amplifi er only after all connections have been made.

• Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifi er.

• Do not reverse the audio left and right jacks.

• The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUIDO1], [AUDIO2], [AUDIO3] from the AUDIO INPUT button.

• The AUDIO OUT jack outputs sound from the selected Audio input.

Monitor VCR

To video output

RCA

To audio output

L

To audio output

R

RCA

BNC

RCA

RCA

RCA

BNC

LCD monitor (second monitor)

RCA

To audio input

L

To audio input

Stereo amplifier

R

External speaker

English-19

Basic Operation

Power ON and OFF Modes

The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the following three options:

1. Pressing the Main Power Switch.

NOTE:

When the Main Power Switch is used to power off the

LCD monitor, the remote control and the power button will not activate the on mode and both green and red power indicator turn off. Be sure to turn the Main Power Switch to the on mode before using these two options.

ON

OFF

MUTE INPUT EXIT

2. Pressing the power button.

NOTE:

Before pressing the power button, be sure to turn on the

Main Power button on the LCD monitor.

3. Using the remote control.

NOTE:

Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor.

Power indicator

English-20

Power Indicator

Power ON

Power OFF

Power Standby when

“SCHEDULE” is enable

Power Standby

Diagnosis

(Detecting failure)

Status

Green

Red

Red On

Green Blinking

Red, Green

*

Red Blinking

See troubleshooting on page 38

Using Power Management

The LCD monitor follows the VESA approved DPM Power

Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fi xed period.

The power management feature on your new display has been set to the “ON” mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC],

[PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Size

RGB 1, 2, 3, 4, 5

DVD/HD, VIDEO<S>,

VIDEO

Signal Type

FULL

FULL

NORMAL

REAL

CUSTOM

NORMAL

REAL

DYNAMIC

CUSTOM

NORMAL SIZE Recommended Size

NORMAL

NORMAL: Display by the inputed signal aspect ratio by PC signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO signal.

FULL: Display in entire screen.

DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image will be cut by expansion.)

CUSTOM (ZOOM): Image can be expanded beyond the active display area. The image which is outside of active diaplay area is not displayed.

REAL: Image will be displayed 1 by 1 pixel.

ZOOM

ZOOM

Picture Mode

RGB 1, 2, 3, 4, 5 HIGHBRIGHT STANDARD sRGB

DVD/HD, VIDEO<S>,

VIDEO

HIGHBRIGHT

STANDARD

CINEMA

Audio Source Switching

You can switch the audio source using the AUDIO INPUT button.

RGB 1, 2 HDMI AUDIO1 AUDIO2 AUDIO3

Other than

RGB 1, 2

AUDIO1

AUDIO2 AUDIO3

Control Lock Mode

This function disables the operation buttons so that the adjustments you make are not changed when they are pressed.

To disable the buttons, press and hold down the and buttons together for at least 3 seconds.

To enable the buttons, press and hold down the and buttons together for at least 3 seconds again.

4:3

DYNAMIC

FULL

Squeeze

English-21

Information OSD

RGB1, 2, 3, 4, 5

RGB3

1024 x 768

48kHz 60Hz

AUDIO : 1

SIZE : FULL

)

Video Input mode

Input signal Information

Audio input mode

Picture Size mode

DVD/HD

DVD/HD

AUDIO : 3

SIZE : FULL

Video Input mode

Audio input mode

Picture Size mode

VIDEO<S>, VIDEO

VIDEO<S>

NTSC

AUDIO : 3

SIZE : NORMAL

Video Input mode

Input Signal Colour System mode

Audio input mode

Picture Size mode

PIP or POP

Main:RGB3

Sub:VIDEO<S>

RGB3

1024 x 768

48kHz 60Hz

AUDIO : 1

VIDEO<S>

NTSC

SIZE : FULL

Main picture Information

) Sub picture Information

Main picture Information

English-22

OSD (On-Screen-Display) Controls

Press MENU button to open Main menu. Press

UP or DOWN button to select sub-menu.

Press SET button to decide.

Press UP or DOWN, and PLUS or

MINUS button to select function, or control which you like.

Press SET button to decide.

Press MENU or

EXIT button to exit.

Remote Control

Control Panel

Press EXIT button to open Main menu.

Press UP or DOWN button to select.

Press INPUT button to decide

Press UP or DOWN, and

PLUS or MINUS button to select function, or control which you like. Press INPUT button to decide

Press EXIT button to exit.

OSD screen

English-23

Main-Menu

PICTURE

BRIGHTNESS

Adjusts the overall image and background screen brightness.

Press + button to increase brightness.

Press - button to decrease brightness.

CONTRAST

Adjusts the image brightness in relation to the input signal.

Press + button to increase contrast.

Press - button to decrease contrast.

SHARPNESS

This function is digitally capable to keep crisp image at any timings.

It is adjustable to get a distinct image or a soft one as you prefer and set independently for each picture mode.

Press + button to increase sharpness.

Press - button to decrease sharpness.

BLACK LEVEL

Adjusts the image brightness in relation to thebackground.

Press + button to increase black level.

Press - button to decrease black level.

NOTE: sRGB picture mode is standard and cannot be changed.

NOISE REDUCTION

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Adjusts the noise reduction level.

Press + button to increase reduction level.

Press - button to decrease reduction level.

TINT

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Adjust the tint of all color, or red, magenta, blue, cyan, green, and yellow individually.

Press + button the flesh tone color becomes greenish.

Press - button the flesh tone color becomes purplish.

COLOR

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Adjust the color saturation of all color, or of red, magenta, blue, cyan, green, and yellow individually.

Press + button to increase color depth.

Press - button to decrease color depth.

COLOR TEMPERATURE

Use to adjust the color temperature.

The image becomes reddish as the color temperature decreases, and it becomes bluish as the color temperature increases.

COLOR CONTROL

The color levels of red, green, and blue are adjusted by the color bars.

R: Red, G: Green, B: Blue

GAMMA SELECTION

Selects a display gamma.

2.2, 2.4, OPTION, S gamma, Native

NOTE: sRGB picture mode is standard and cannot be changed.

English-24

AUTO BRIGHTNESS

This function controls the screen brightness depending on the ambient light for easy viewing.

In addition, it changes the screen brightness depending on the ambient light and what are displayed on the screen to reduce power consumption as low as possible.

[AUTO BRIGHTNESS]

LOCAL: The auto brightness function is enabled.

REMOTE: The auto brightness function is enabled. Select this setting to receive data for communication control from other device or monitor when multiple monitors are controlled collectively.

OFF: This function is disabled.

[CONTROL]

PRIMARY: Select this setting to configure the monitor as Master when controlling multiple monitors collectively.

SECONDARY: Select this setting to use the monitor alone or to configure the monitor as Slave when controlling multiple monitors collectively.

[LIGHT FROM BACK]

YES: Select this setting when there is a light source such lighting equipment and a window behind the monitor.

NO: Select this setting when there is no light source such lighting equipment and a window behind the monitor.

[BACK WALL]

Select the following settings according to the distance between the rear of the monitor and the wall or window.

FAR: The distance is 5 meters or longer.

NEAR: The distance is 5 meters or shorter.

[FRONT SENSOR]

Select ON for normal use.

OFF: Select this setting when the sensor on the front panel is shielded.

[REAR SENSOR]

Select ON for normal use.

OFF: Select this setting when the sensor on the rear panel is shielded.

[SATURATION]

ON: The image saturation is adjusted depending on the ambient light.

OFF: Image saturation isn't adjusted.

[VIDEO DETECT]

ON: The screen brightness varies depending on what are displayed on the screen to reduce power consumption of the monitor.

OFF: The screen brightness doesn’t vary and the power consumption isn’t reduced.

PICTURE RESET

Selecting Picture reset allows you to reset all OSD settings about PICTURE setting.

Select “Yes” and press “SET” button to restore to factory preset data.

Press “EXIT” button to cancel and then return to the previous menu.

English-25

Main-Menu

SCREEN

H POSITION

Controls Horizontal Image position within the display area of the LCD.

Press + button to move screen to right.

Press - button to move screen to left.

V POSITION

Controls Vertical Image position within the display area of the LCD.

Press + button to move screen to UP.

Press - button to move screen to DOWN.

CLOCK

* : INPUT RGB3, 4, 5 only

Press + button to expand the width of the image on the screen the right.

Press - button to narrow the width of the image on the screen the left.

CLOCK PHASE

* : INPUT RGB3, 4, 5 only

Improves focus, clarity and image stability by increasing or decreasing this setting.

ZOOM MODE

You can select “FULL”, “NORMAL” and “CUSTOM” and “REAL”. (INPUT RGB1, 2, 3, 4, 5 only) You can also select “FULL”,

“NORMAL” “DYNAMIC” and “CUSTOM” and “REAL”. (INPUT DVD/HD, VIDEO<S>, VIDEO only)

Selecting “DYNAMIC” will make the screen display panoramic with the expansion of the middle and outside of the screen changed. (The upper and the bottom of the image will be cut by expansion.)

Dynamic image is the same as FULL size image when HDTV signal is input.

Selecting “REAL” image will be displayed 1 by 1 pixel.

CUSTOM ZOOM

“CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode.

ZOOM: expands the horizontal and the vertical size simultaneously.

HZOOM: expands the horizontal size only.

VZOOM: expands the vertical size only.

H POSITION: moves to the right with + button. moves to the left with – button.

V POSITION: moves up with + button. moves down with – button.

H RESOLUTION

* : INPUT RGB1, 2, 3, 4, 5 only

Adjusts the horizontal size by increasing or decreasing the setting.

Press + button to expand the width of the image on the screen.

Press - button to narrow the width of the image on the screen.

V RESOLUTION

* : INPUT RGB1, 2, 3, 4, 5 only

Adjusts the vertical size by increasing or decreasing the setting.

Press + button to expand the height of the image on the screen.

Press - button to narrow the height of the image on the screen.

ROTATION

The OSD screen is rotated.

OFF H FLIP V FLIP

SCREEN RESET

Horizontally rotated

Selecting Screen reset allows you to reset all OSD settings from PICTURE setting.

Select “Yes” and press “SET” button to restore the factory preset data.

Press “EXIT” button to cancel and then return to the previous menu.

English-26

Vertically rotated

Main-Menu

AUDIO

BALANCE

Adjust the balance of L/R volume.

Press + button to move the stereo sound image to right.

Sound of the left side will be small.

Press - button to move the stereo sound image to left.

TREBLE

To accentuate or reduce the high frequency sound.

Press + button to increase TREBLE sound.

Press - button to decrease TREBLE sound.

BASS

To accentuate or reduce the low frequency sound.

Press + button to increase BASS sound.

Press - button to decrease BASS sound.

AUDIO RESET

Selecting Audio reset allows you to reset all OSD settings from AUDIO setting.

Select “YES” and press “SET” button to restore the factory preset.

Press “EXIT” button to cancel and then return to the previous menu.

Main-Menu

PIP (PICTURE IN PICTURE)

Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”.

PIP SIZE

Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode.

“Large”, “Middle” and “Small” are available.

PIP AUDIO

Selecting the sound source in PIP mode.

When selecting “MAIN AUDIO”, you will get the sound for the main picture and when selecting “PIP AUDIO”, you will get the sound for the picture instead.

PIP RESET

Selecting PIP Reset allows you to reset all OSD settings from PIP setting.

Select “Yes” and press “SET” button to restore the factory preset data.

Press “EXIT” button to cancel and then return to the previous menu.

English-27

Main-Menu

CONFIGURATION 1

AUTO SETUP

* : INPUT RGB3, 4, 5 only

Press “SET” button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level.

Press “EXIT” button to cancel execution AUTO SETUP and then will return to the previous menu.

AUTO ADJUST

* : INPUT RGB3, 4, 5 only

Selecting the auto adjust ON/OFF.

Selecting ON when changing the timing, the horizontal position, vertical position and clock-phase will adjust automatically.

POWER SAVE

Selecting RGB “ON”, the monitor will go to power management mode when RGB1, 2, 3, 4, 5 sync is lost.

Selecting VIDEO “ON”, the monitor will go to power management mode after about 10 minutes delay from when DVD/HD,

VIDEO<S> and VIDEO input signal is lost.

LANGUAGE

OSD control menus are available in eight languages.

(English, German, Spanish, French, Italian, Swedish, Chinese and Japanese)

SCREEN SAVER

Select “SCREEN SAVER” functions to reduce the risk of the “image persistence”.

GAMMA: The display gamma is changed and fixed when selected “ON”.

COOLING FAN: The built in cooling fan is always on when set “ON”. When “AUTO” is selected, the built-in cooling fan starts rotating automatically when the internal temperature exceeds the operation guarantee range.

BRIGHTNESS: The brightness is decreased when selected “ON”.

MOTION: Image is slightly expanded and moves 4 directions (UP, DOWN, RIGHT, LEFT) periodically

(Need setting the time for movement).

Movement area is approximately +/- 10mm from original position;

Please locate the important information such as text within 90% area of screen image.

See note (1) for this functions.

PIP and STILL will be disabled when “MOTION” is active.

COLOR SYSTEM

* : INPUT VIDEO<S>, VIDEO only

Selecting the Color System depends on your input video format.

AUTO: NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is automatically selected.

NTSC: Specific selection of NTSC.

PAL: Specific selection of PAL.

SECAM: Specific selection of SECAM.

PAL-60: Specific selection of PAL60.

4.43NTSC: Specific selection of 4.43 NTSC.

SIDE BORDER COLOR

Use to adjust the brightness of the black areas displayed on both sides of 4:3 image.

OFF, 50, and 100 are selectable.

CONFIGURATION RESET

Selecting the CONFIGURATION RESET allows you to reset all configuration settings.

Select “Yes” and press “SET” button to restore the factory preset data.

Press “EXIT” button to cancel and return the previous menu.

FACTORY RESET

Selecting “YES” allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE AND TIME, HDMI INPUT MODE, DVI INPUT MODE, DDC/CI, MONITOR ID and

SCHEDULE).

Select “YES” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and return the previous menu.

English-28

Main-Menu

CONFIGURATION 2

CAT5 CABLE LENGTH

[CAT5 CABLE LENGTH]

Select the cable length, and the defaults of all the adjustment values are automatically determined.

Select the length that is closest to the actual length of your cable.

[CAT5 EQ]

Make adjustment so that blur and smear of the displayed letters and graphic objects are minimized.

[CAT5 R-GAIN, G-GAIN, B-GAIN]

When the displayed image is dark, increase each value.

When whites aren't displayed as intended, adjust the R-GAIN and B-GAIN values.

[CAT5 R-SKEW, G-SKEW, B-SKEW]

Adjust each value so that the color deviation in the displayed letters and graphic objects is minimized.

SERIAL CONTROL

Select the communication interface (RS232 or RS485) for the serial communication function.

For connection of the signal cable, see page 35.

RS485 TERMINATION

Turn ON or OFF the termination resistance of the RS-485 interface.

ON: Select this setting to use the monitor alone or to configure the monitor as the one at the end of the connection when more than one monitor is multi-connected.

OFF: Select this setting to configure the monitor as other than the one at the end of the connection when more than one monitor is multi-connected.

OSD TURN OFF

The OSD control menu will stay on as long as it is use. In the OSD Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu.

The preset choices are 5 -120 seconds.

INFORMATION OSD

Selects the information OSD display or not.

The information OSD will display when input signal or source change or warning message like as no-signal or out-of range.

A time between 1 to 10 seconds is available.

OFF TIMER

To select OFF TIMER mode ON/OFF.

In the OFF TIMER menu, you can preset the monitor to automatically power down.

A time between 1 to 24 hours is available.

When the OFF TIMER is set, the SCHEDULE (see page 31) settings will be disabled.

OSD H POSITION

Adjusts the horizontal position of the OSD menu.

OSD V POSITION

Adjusts the vertical position of the OSD menu.

MONITOR INFORMATION

Indicates the model and serial number of your monitor.

English-29

Main-Menu

ADVANCED OPTION

INPUT RESOLUTION

* : INPUT RGB3, 4, 5 only

Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.

AUTO: Determines the resolution automatically.

1024x768: Determines the resolution as 1024x768

1280x768: Determines the resolution as 1280x768

1360x768: Determines the resolution as 1360x768

The setting you select becomes effective when POWER is turned OFF and ON again.

BLACK LEVEL EXPANSION

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Selects a level of black expansion from “OFF”, “MIDDLE” and “HIGH.”

In case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu.

SCAN MODE

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Changes the display area of the image.

OVERSCAN: Set to display area about 95%

UNDERSCAN: Set to display area about 100%

SCAN CONVERSION

* : INPUT RGB1 (HDMI INPUT MODE: HDMI-HD), RGB2 (DVI INPUT MODE: DVI-HD), DVD/HD, VIDEO<S>, VIDEO only

Selects IP (Interlace to Progressive) converter function.

PROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting.

INTERLACE*: Disable the IP function.

*NOTE: This mode is better suited for motion pictures, but it increases chance of image retention.

FILM MODE

Selects Film mode function.

AUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”.

OFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source.

IR CONTROL

Selects the operation mode of the wireless remote controller when multiple MDT521S monitors are connected via RS-232C.

The item in this menu will become effective by pressing “SET” button on the selected item.

NORMAL: The monitor will be controlled normally by wireless remote controller.

PRIMARY: The first MDT521S monitor of those multi-connected via RS-232C is designated as PRIMARY.

SECONDARY: MDT521S monitors other than the first one multi-connected via RS-232C are designated as SECONDARY.

LOCK: Disable the monitor control by infrared wireless remote controller.

Keep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL”.

TILING

TILING demonstrates multiple screens. This feature provides a single large screen using up to 25 monitors.

It will be able to divide up to 5 each H and V.

This requires you to feed the PC output into each of the monitors through a distributor.

H MONITORS: Select number of horizontal divide.

V MONITORS: Select number of vertical divide.

POSITION: Select a position to expand the screen.

FRAME COMP.: Works in tandem with TILING to compensate for the width of the tile bezels in order to accurately display the image.

ENABLE: Select “YES”, the monitor will expand the selected position.

PIP and STILL will be disabled when “TILING” is activated.

English-30

HEAT STATUS

Information of status for COOLING FAN, BRIGHTNESS and TEMPERATURE.

COOLING FAN comes to run when inside temperature is over a guaranteed limit.

In this case warning is displayed on the screen.

POWER ON DELAY

Adjusts the delay time from “standby” to “power on” mode.

“POWER ON DELAY” time is selectable from 0-50 seconds.

DATE AND TIME

Adjusts the current date and time for internal clock.

You should set this function when you use “SCHEDULE”.

SCHEDULE

Programs the monitor's working schedule.

Schedule the power on and power off with hour and a day of the week. Also sets the input port.

This OSD can't remove except EXIT.

(see “HOW TO SETUP SCHEDULE” on page 32.)

HDMI INPUT MODE

Select “HDMI-PC” when PC or other computer equipment is connected via HDMI.

Select “HDMI-HD” when DVD player, which has HDMI output, is connected via HDMI.

DVI INPUT MODE

Select “DVI-PC” when PC or other computer equipment is connected via DVI-D.

Select “DVI-HD” when DVD player, which has HDMI output, is connected via DVI-D.

MONITOR ID

ID numbers for remote control are assigned to MDT521S monitors that are multi-connected via RS-232C.

ID numbers 1 to 26 are selectable.

DDC/CI

Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.

SYNC TYPE

* : INPUT RGB3, 4 only

Select “0.3V” for 0.3 Composite Sync.

Select “TTL” for TTL Sync.

ADVANCED OPTION RESET

Selecting ADVANCED OPTION RESET allows you to reset all OSD settings from ADVANCED OPTION settings, except for DATE AND TIME, SCHEDULE, HDMI INPUT MODE, DVI INPUT MODE, MONITOR ID, and DDC/CI.

Select “YES” and press “SET” button to restore the factory preset data.

Press “EXIT” button to cancel and then return the previous menu.

English-31

NOTE

< IMAGE PERSISTENCE >

Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Please set “POWER SAVE”, “SCREEN SAVER”, “DATE AND TIME” and “SCHEDULE” functions to further reduce the risk of

Image persistence.

< For long life use of Public Display >

Image Sticking of LCD Panel

When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or “ghost” image of previous image may be observed. (Image Persistence)

Image Persistence is not permanent, but when fi xed image is displayed for long period, ionic impurities inside LCD are accumulated along the displayed image, and it is observed permanently. (Image Sticking)

Recommendations

For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.

1. Fixed image should not be displayed for long period, and changed to another images with short cycle.

2. When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule

Function of monitor.

3. Reducing the environmental temperature is effective for long life use.

When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please utilize the temperature sensors inside monitor.

To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan “ON” by using Screen sever Function.

4. Please use "Screen Saver Mode" of monitor.

< HOW TO SETUP SCHEDULE >

Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.

You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the monitor will use for each scheduled activation period. A check mark in the box next to the number of the schedule indicates that the selected schedule is in effect.

To select which schedule to set, use the up/down arrows to move the number (1 to 7) of the schedule.

Use the (+) and (-) buttons to move the cursor horizontally within the particular schedule. Use the ( ) and ( ) buttons to increase time and select input port. The “SET” button is used to make a selection.

If you create a schedule but do not want to use a power on time, select “--” in the “ON” time slot.

If you do not want to use a power off time select “--” in the OFF time slot.

If there is no input selected (“--” showing in the input spot) the input from the previous schedule will be used.

The selection of EVERY DAY within a schedule takes priority over other schedules that are set up to operate weekly.

When schedules are overlapping, scheduled Power ON time has priority over scheduled Power OFF time.

If there are two schedules programmed for the same time, then the highest numbered schedule has priority.

When the “OFF TIMER” (see page 29) is set, the “SCHEDULE” function is disabled.

English-32

< PIP, POP and SIDE BY SIDE >

The following table shows the combination of signal inputs under which the “PIP” and “POP” modes function. These modes do not function, however, when the screen size is “CUSTOM” or “REAL”.

SUB

MAIN

RGB1 (HDMI)

RGB2 (DVI-D)

RGB3 (D-SUB)

RGB4 (BNC)

RGB5 (CAT5)

DVD/HD (YPbPr)

VIDEO<S>

VIDEO

RGB1

(HDMI)

RGB2

(DVI-D)

RGB3

(D-SUB)

RGB4

(BNC)

RGB5

(CAT5)

DVD/HD

(YPbPr)

VIDEO<S> VIDEO

Press the “PIP ON/OFF” buttons on the remote control to change between “PIP”, “POP” and “SIDE BY

SIDE” mode as shown in the diagram below.

PIP POP

SIDE BY SIDE

ASPECT

SIDE BY SIDE

FULL

: Supported

: Not supported

OFF

“PIP”, “POP” mode resolution (Reference)

PIP SIZE

SMALL

MIDDLE

LARGE

POP SIZE

: 450 dots X 338 dots

: 675 dots X 450 dots

: 900 dots X 675 dots

: 450 dots X 338 dots

< Supplemental information of the auto brightness function >

To control multiple monitors collectively

In such a case where the tiling function is used, you can control the auto brightness function by sharing the detection result of the brightness sensor of a certain monitor among the connected monitors.

1. Multi-connect the monitors using RS-232C or CAT5 cables as shown by the example below.

Monitor

ID = 9

(Slave)

Monitor

ID = 8

(Slave)

Monitor

ID = 7

(Slave)

Monitor

ID = 6

(Slave)

Monitor

ID = 5

(Slave)

Monitor

ID = 4

(Slave)

Master: Monitor configured as Master that detects the outside light (Monitor ID is “1”.)

Slave: Monitor controlled by the Master monitor

(Monitor ID is other than “1”.)

Monitor

ID = 3

(Slave)

Monitor

ID = 2

(Slave)

Monitor

ID = 1

(Master)

2. Assign a monitor ID to each multi-connected MDT521S using MONITOR ID.

Monitor ID is selectable from 1 to 26.

The monitor ID of the Master monitor should be “1” and those of the Slave monitors should be other than “1”.

You are recommended to assign IDs to the monitors consecutively from 1, 2, 3, and on.

3. Set AUTO BRIGHTNESS on the OSD screen (PICTURE) as follows.

Master monitor

Slave monitors

AUTO BRIGHTESS

LOCAL

REMOTE

CONTROL

PRIMARY

SECONDARY

English-33

To use a computer to control the monitors

When using a computer to control the monitors, you must prepare an application software program for control by yourself.

1. Connect the RS-232C IN connector of the Master monitor shown above and the RS-232C connector of the computer using an RS-232C cable.

Or, using a CAT5 cable, connect the RS-232C connector of the computer to the CAT5 IN connector of the Master monitor via the CAT5-TX box.

2. Assign a monitor ID to each multi-connected MDT521S using MONITOR ID. (See step 2 above.)

3. Set AUTO BRIGHTNESS on the OSD screen (PICTURE) as follows.

Master monitor

Slave monitors

AUTO BRIGHTESS

REMOTE

REMOTE

CONTROL

SECONDARY

SECONDARY

4. For the use of communication commands, contact your dealer.

< Remote control numbering function >

By connecting multiple MDT521S monitors using RS-232C cables, you can control any one monitor or all the monitors by one remote controller.

1. Assign arbitrary ID number to each of multi-connected MDT521S monitors using MONITOR ID.

ID numbers 1 to 26 are selectable.

It is recommended to assign sequential ID numbers from 1 and up.

2. The remote control mode of the fi rst MDT521S monitor is set to PRIMARY and those of the other monitors are set to

SECONDARY.

3. When you direct the remote controller at the remote control signal sensor of the PRIMARY monitor and press the DISPLAY button on the remote controller, the ID selection OSD appears at the upper left of the screen.

ID:1

ID No. :2

ID number of the currently viewed monitor

Select the ID number of the monitor you want to control using the +/- button on the remote controller.

The ID of the monitor you want to control is displayed at the upper left of its screen.

By selecting ALL, you can control all the multi-connected monitors.

4. Direct the remote controller at the remote control signal sensor of the PRIMARY monitor.

OSD appears on the monitor having the ID number you selected.

NOTE:

When the ID selection OSD is being displayed on the PRIMARY monitor, press the DISPLAY button on the remote controller again to cancel the ID selection OSD and then control the monitor you selected.

NOTE:

If you set the remote control mode wrongly and remote control operation becomes unavailable, press any button on the control panel of the monitor to display the OSD screen and change the remote control mode using ADVANCED OPTION. By pressing and holding down the DISPLAY button on the remote control for 5 seconds or longer, the remote control mode is initialized to

NORMAL.

English-34

Controlling the LCD monitor via RS-232C/RS-485 Remote Control

This LCD monitor can be controlled by the computer connected by an RS-232C cable or a CAT5 cable via the supplied CAT5 Tx

BOX.

Functions that can be controlled by a personal computer are:

• Power ON or OFF

• Switching between input signals

Connection

Connection by RS-232C (For RS-232C cable, the reverse type cable should be used.)

PC

Monitor Monitor

RS-232C cable

To RS-232C IN To RS-232C OUT

RS-232C cable

To RS-232C IN To RS-232C OUT

Connection by CAT5 RS-485 (For CAT5 cable, the straight type cable should be used)

Type A Type B

CAT5 Tx BOX

(supplied)

Monitor

USB cable

PC

To RS-232C

IN

To CAT5

OUT

To CAT5

RGB5 IN

To CAT5

OUT

Monitor

To CAT5

RGB5 IN

To CAT5

OUT

RS-232C cable

CAT5 cable

This connection isn't necessary when the USB COM port is used.

CAT5 cable

NOTE:

If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required.

Contact your dealer for details.

1) Interface

PROTOCOL

BAUD RATE

DATA LENGTH

PARITY BIT

STOP BIT

FLOW CONTROL

RS-232C/RS-485 (CAT5)

9600 [bps]

8 [bits]

NONE

1 [bits]

NONE

This LCD monitor uses RXD, TXD and GND lines for RS-232C control.

2) Control command diagram

The command is structured by the address code, function code, data code and end code. The length of the command is different for each function.

HEX

ASCII

Address code

30h 30h

‘0’ ‘0’

Function code

Function

Function

Data code

Data

Data

End code

0Dh

[Address code] 30h 30h (In ASCII code, ‘0’ ‘0’) fi xed.

[Function code] A code of each fi xed control move.

[Data code]

[End code]

A code of each fi xed control data (number) and not always indicated.

0Dh (In ASCII code, ‘ ‘ ) fi xed.

English-35

3) Control sequence

(1) The command from a computer to the LCD monitor will be sent in 600 ms.

(2) The LCD monitor will send a return command 600 ms* after it has received and encoded. If the command isn’t received correctly, the LCD monitor will not send the return command.

(3) The personal computer checks the command and confi rms if the command, which has been sent, has been executed or not.

(4) This LCD monitor sends various codes other than return code. When having a control sequence by RS-232C, reject other codes from personal computers side.

* : The sending time of return command may delay depending on the condition (during changing of the input signal, etc.).

Example: Turn the power ON ( ’ ’ is for ASCII code)

Sending commands from the PC

30 30 21 0D

’0’ ’0’ ’!’ ’ ’

Status code from

LCD monitor

30 30 21 0D

’0’ ’0’ ’!’ ’ ’

Meaning

Command for

POWER ON

Command received

(Command echoed back)

4) Operation commands

The operation commands execute the basic operation setting of this LCD monitor.

It may not operate when changing the signal:

Operation ASCII

POWER ON

POWER OFF

INPUT RGB 1

INPUT RGB 2

INPUT RGB 3

INPUT RGB 4

INPUT RGB 5

INPUT VIDEO

INPUT DVD/HD

_v1

_v2

INPUT S-VIDEO* _v3

!

"

_r1

_r2

_r3

_r4

_r5

HEX

21h

22h

5Fh 72h 31h

5Fh 72h 32h

5Fh 72h 33h

5Fh 72h 34h

5Fh 72h 35h

5Fh 76h 31h

5Fh 76h 32h

5Fh 76h 33h

• POWER OFF command should be operated over 1 minute after the power is turned on.

• POWER ON command should be operated over 1 minute after the power is turned off.

* S-VIDEO is SEPARATE only

5) Read command

Host computer sends the command without Data-code to monitor.

After receiving this command, the monitor returns the command with Data-code of current status to host computer.

Example: When Host computer ask Power status of monitor, the status of monitor is powered-on.

Command from computer

30 30 76 50 0D '0''0''v''P'[enter]

Command from Monitor

Detail of command

Ask about the power status of monitor

30 30 76 50 31 0D '0''0''v''P''1'[enter] Monitor is powered-on.

Structure of the Read-command

POWER

Input

Picture mode

Temperature of internal monitor

ON

OFF (stand by)

RGB-1 (HDMI)

RGB-2 (DVI-D)

RGB-3 (D-SUB)

RGB-4 (BNC)

RGB-5 (CAT5)

Video

DVD/HD

S-VIDEO

HIGHBRIGHT

STANDARD

Around

Main board resolution

1 ˚C

Around

Power PCB resolution

1 ˚C

Function vI vI vI vI vI vI vM vP vP vI vI vM tc1 tc2 r3 r4 r5 v1 v2 v3 p1

ASCII

Data (Receive)

1

0 r1 r2 p2

(ex.) +25

(ex.) +31

Function

76 50

76 50

76 49

76 49

76 49

76 49

76 49

76 49

76 49

76 49

76 4D

76 4D

74 63 31

74 63 32

HEX

Data (Receive)

31

30

72 31

72 32

72 33

72 34

72 35

76 31

76 32

76 33

70 31

70 32

2B 20 32 35

2B 20 33 31

English-36

Features

Reduced Footprint:

Provides the ideal solution for environments requiring superior image quality but with size and weight limitations.

The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another.

Color Control Systems:

Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards.

sRGB Color Control:

A new optimized color management standard which allows for color matching on computer displays and other peripherals. The sRGB standard, which is based on a calibrated color space, allows for optimal color representation and backward compatibility with other common color standards.

OSD (On-Screen-Display) Controls:

Allow you to quickly and easily adjust all elements of your screen image via simple to use on-screen menus.

Plug and Play:

The Microsoft

® solution with the Windows

®

95/98/Me/2000/XP operating system and Windows Vista

®

facilitates setup and installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance.

Intelligent Power Manager System:

Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace.

Multiple Frequency Technology:

Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the resolution required.

FullScan Capability:

Allows you to use the entire screen area in most resolutions, signifi cantly expanding image size.

Wall Mounting Interface:

Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.

TILING, Frame compensation:

Demonstrates multiple screens with an accurate image and compensates for the bezel width.

ZOOM:

Expands the image individually for horizontal and vertical direction.

Self-diagnosis:

When an internal error should occur, a failure state will be indicated.

CAT5 Long Cable Compensation:

CAT5 long cable compensation prevents image quality degradation (color shift and dull signals) caused by long cable lengths.

English-37

Troubleshooting

No picture

• The signal cable should be completely connected to the display card/computer.

• The display card should be completely seated in its slot.

• Front Power Switch and computer power switch should be in the ON position.

• Check to make sure that a supported mode has been selected on the display card or system being used.

(Please consult display card or system manual to change graphics mode.)

• Check the monitor and your display card with respect to compatibility and recommended settings.

• Check the signal cable connector for bent or pushed-in pins.

• If nothing is displayed on the screen when HDCP device is connected, reset the power of the device.

Power Button does not respond

• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image persistence

• Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE:

As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

• Signal cable should be completely attached to the computer.

• Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fi ne adjustment.

When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.

• Check the monitor and your display card with respect to compatibility and recommended signal timings.

• If your text is garbled, change the video mode to non-interlace and use 60 Hz refresh rate.

Image of component signal is greenish

• Check to see if the DVD/HD input connector is selected.

LED on monitor is not lit (no green or red color can be seen)

• Power Switch should be in the ON position and power cord should be connected.

• Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

RED LED on monitor is blinking

• A certain failure might have occurred, please contact your nearest authorized MITSUBISHI ELECTRIC service facility.

Display image is not sized properly

• Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.

• Check to make sure that a supported mode has been selected on the display card or system being used.

(Please consult display card or system manual to change graphics mode.)

Selected resolution is not displayed properly

• Use OSD Display Mode to enter Information menu and confi rm that the appropriate resolution has been selected.

If not, select corresponding option.

English-38

No Sound

• Check to see if speaker cable is properly connected.

• Check to see if mute is activated.

• Check to see if volume is set at minimum.

Remote Control is not available

• Check the Remote Control’s batteries status.

• Check if batteries are inserted correctly.

• Check if the Remote Control is pointing at the monitor’s remote sensor.

“SCHEDULE”/“OFF TIMER” function is not working properly

• The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.

• If the “OFF TIMER” function is enable and the power to the LCD monitor is turned off if the power supply is interrupted unexpectedly, then the “OFF TIMER” will be reset.

Stripe Noise

Either light vertical or horizontal stripes may appear, depending on the specifi c display pattern. This is no product fault or degradation.

“NO SIGNAL” is displayed on the screen

Image may not be displayed right after HDCP device is connected.

English-39

Specifi cations

Specifi cations (MDT521S)

Product Specifications

LCD Module

Frequency

Diagonal:

Pixel Pitch:

Resolution:

Color:

Brightness:

Contrast Ratio:

Response time:

View Angle:

Horizontal:

Vertical:

Pixel Clock

Viewable Size

Input Signal

PC-Input: Video:

Sync:

Input-terminal:

Analog Input

52" / 132.2 cm

0.600 mm

1920 x 1080 dots

Over 16 million colors (depending on video card used)

700 cd/m 2 (typ.)

2000:1

8 ms (G to G)

Up and Down 178°, Left and Right 178° @CR>10

15.625 / 15.734, 31.5 - 91.1 kHz

50.0 / 58.0 - 85.0 Hz

13.5 -165.0 MHz

1152.0 x 648.0 mm / 45.4 x 25.5 inches

Digital Input

25.0 -165.0 MHz

Analog RGB Video: 0.7 Vp-p

Input impedance 75 ohm

TMDS

Separate HV sync: TTL level (Pos./Neg.), Sync-on-green, Composite Sync (0.3Vp-p)

Input Impedance 2.2K ohm

BNC (R,G,B,H,V), 15 Pin Mini D-sub

Composite: 1.0 Vp-p

Input impedance 75ohm BNC and RCA-PINJACK-INPUT

Y/C Y: 1 Vp-p C: 0.286 Vp-p Input

Impedance 75 ohm S-TERMINAL-INPUT

Component: 1.0 / 0.7 Vp-p

Input Impedance 75 ohm BNC-INPUT

RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1

RJ45

9 Pin Mini D-sub

HDMI, DVI-D

Input:

CAT5:

RS-232C:

Output Signal

PC-Output:

In:

In:

Video:

Sync:

Output-terminal:

Output:

AUDIO

Speaker

CAT5:

RS-232C:

Resolutions Supported

Out:

Out:

Power Supply

Power Consumption

Operational

Environment

Storage

Environment

Dimension

Weight

Wall mounting interface

Complied Regulatory and Guidelines

Power Management

Plug & Play

Accessories

Power Save:

Temperature:

Humidity:

Temperature:

Gross:

Net:

Gross:

Net:

Analog RGB Video: 0.7 Vp-p with 75 ohm terminated

Separate HV sync: TTL level (Pos./Neg.)

15 Pin Mini D-sub

BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated

RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated

External Speaker Jack 7 W + 7 W (8 ohm)

RJ45

9 Pin Mini D-sub

640 x 480 at 60 Hz to 85 Hz

800 x 600 at 50 Hz, 60Hz to 85 Hz

1024 x 768 at 50 Hz, 60Hz to 85 Hz

1280 x 768 at 50 Hz, 60Hz to 85 Hz

1360 x 768 at 50 Hz, 60Hz to 85 Hz

1280 x 1024 at 60Hz to 85 Hz

1600 x 1200 at 60 Hz

1920 x 1080 at 60Hz* ( * : Recommended Resolution)

NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i,1080p

5.6 - 2.4 A @100 - 240 V AC, 50 / 60 Hz

Max 380 W

Less than 5 W (Power button OFF/Main power switch ON)

Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F

20 - 80 % (Without condensation)

-20 - 60 °C / -4 - 140 °F

10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C

1202 mm (W) x 698 mm (H) x 122 mm (D) / 47.32" (W) x 27.48" (H) x 4.80" (D)

1405 mm (W) x 951 mm (H) x 275 mm (D) / 55.31" (W) x 37.44" (H) x 10.83" (D)

88.2 lbs / 40 kg (Approximately)

105.8 lbs / 48 kg

8 Holes (200 mm pitches)

Optional Multi-purpose Fix Mount

UL60950-1/C-UL/TUV-GS/EN60950-1/FCC-B/DOC-B/EN55022-B

EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/BSMI/GOST

VESA DPM

VESA DDC2B, DDC/CI

User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,

Clamper x 2 (To prevent from falling), Clamper x 3 (For securing cables), Clamper x 2

(For securing the power cord and HDMI cable), Screw for CLAMPER x 2,

CAT5-TX box

Note: Technical specifications are subject to change without notice.

English-40

Pin Assignment

Pin No

1

2

3

7

8

9

10

11

12

13

14

15

4

5

6

1) Analog RGB input (Mini D-SUB 15P): RGB3

Name

Video Signal Red

Video Signal Green

Video Signal Blue

GND

DDC-GND

Red-GND

Green-GND

Blue-GND

+5V (DDC)

SYNC-GND

GND

DDC-SDA

H-SYNC

V-SYNC

DDC-SCL

5

15

10

Mini D-SUB 15P

2) Analog RGB input (CAT5): RGB5

Pin# at RJ45

#1

#2

#3

#4

#5

#6

#7

#8

Signal

Red Video+

Red Video-

Green Video+

Blue Video+

Blue Video+

Green Video-

RJ485+

RJ485-

Pair

CAT5 RJ45

1 2 3 4 5 6 7 8

3) Digital RGB input (HDMI): RGB1

6

7

4

5

1

2

3

TMDS Data2+

TMDS Data2 Shield

TMDS Data2-

TMDS Data1+

TMDS Data1 Shield

TMDS Data1-

TMDS Data0+

Pin - Assignment of HDMI connector:

8 TMDS Data0 Shield 15 SCL

9

10

11

12

13

14

TMDS Data0-

TMDS Clock+

TMDS Clock Shield

TMDS Clock-

CEC

Reserved (N.C. on device)

16

17

18

19

SDA

DDC/CEC Ground

+5V Power

Hot Plug Detect

1

2

3

4

1

2

5

6

7

4) Digital RGB input (DVI-D): RGB2

8

TMDS Data2-

TMDS Data2+

TMDS Data2 Shield

NC

NC

DDC Clock

DDC Data

Analog Vertical Sync

Pin - Assignment of DVI-D connector:

9

10

TMDS Data1-

TMDS Data1+

17

18

11

12

TMDS Data1 Shield

NC

19

20

13

14

15

16

NC

+5V Power

Ground (return for +5V,

H-SYNC and V-SYNC)

Hot Plug Detect

21

22

23

24

TMDS Data0-

TMDS Data0+

TMDS Data0 Shield

NC

NC

TMDS Clock Shield

TMDS Clock+

TMDS Clock-

1

9

17

1

11

6

HDMI

19

18

DVI-D

8

24

16

English-41

5) S-VIDEO input (MINI DIN 4P): VIDEO<S>

Pin No

1

2

3

4

Name

GND

GND

Y (Luminance)

C (Chroma)

Pin No

1

2

5

6

3

4

7

8

9

6) RS-232C input/output

Name

NC

RXD

TXD

NC

GND

NC

RTS

CTS

NC

MINI DIN 4P

1

6

Mini D-SUB 9P

5

9

English-42

MITSUBISHI Contact Information

North America

MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca

Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2,

Canada

Sales

Technical

Phone

Fax

E-mail

Phone

Fax

Customer Care

:+1-(905) 475-7728

:+1-(905) 475-7958

:[email protected]

:+1-(905) 475-7728

:+1-(905) 475-7958

E-mail :[email protected]

MDEA (Mitsubishi Digital Electronics America, Inc.)

(Warranty Registration) http://www.mitsubishi-presentations.com/

Presentation Products Division, 9351 Jeronimo Road, Irvine, CA 92618 U.S.A

Phone Main Line

Technical

Product Information :+1-(888) 307-0312

Technical Support

E-mail :[email protected]

:+1-(949) 465-6000

:+1-(888) 307-0309

Europe

MEU-FRA (Mitsubishi Electric Europe B.V French Branch)

25, Boulevard des Bouvets 92 741, Nanterre CEDEX, France

Sales

Technical

Phone

Fax

Phone

Fax

:+33 (0)1 55-68-55-07

:+33 (0)1 55-68-57-31

:+33 (0)1 55-68-56-42

:+33 (0)1 55-68-57-31

MEU-GER (Mitsubishi Electric Europe B.V. German Branch) http://www.mitsubishi-evs.de/

Gothaer Strasse 8, 40880 Ratingen, Germany

MEU-IR (Mitsubishi Electric Europe B.V. Irish Branch) http://www.mitsubishi.ie/

Westgate Business Park, Ballymount, Dublin 24, Ireland

Sales

Technical

Phone

Fax

Phone

Fax

:+353-(0)1- 4198844

:+353-(0)1-4564422

:+353-(0)1-4198807

:+353-(0)1-4198895

MEU-IT (Mitsubishi Electric Europe B.V. Italian Branch)

Centro Direzionale Colleoni, Palazzo Persero-Ingresso 2, Via Paracelso 12, 20041

Agrate Brianza, Italy

Sales Phone

Fax

E-mail

:+39-(0)39-60531

:+39-(0)39-6053214

:[email protected]

MEU-NL (MitsubishiElectric Europe B.V. Benelux Branch) http://www.MitsubishiElectric.nl

Nijverheidsweg 23a, 3641 RP Mijdrecht, The Netherlands

Sales

Technical

Phone

Fax

E-mail

Phone

Fax

E-mail

:+31-297-282461

:+31-297-283936

:[email protected]

:+31-297-282461

:+31-297-283936

:[email protected]

MEU (MITSUBISHI ELECTRIC EUROPE B.V.) http://www.mitsubishi-projector.ru/

Moscow Representative Office, 12/1 Goncharnaya St. 109240, Moscow, Russia

Sales Phone

Fax

:+7 (095) 915 8602

:+7 (095) 915 8603

MEU-SP (Mitsubishi Electric Europe B.V. Spanish Branch) http://www.mitsubishielectric.es/

Ctra. de Rubi, 76-80, 08190 Sant Cugat del Valles, Barcelona, Spain

Sales

Technical

Phone

Fax

E-mail

Phone

Fax

E-mail

:+34-93.565.31.54

:+34-93.589.43.88

:[email protected]

:+34-93.586.27.51

:+34-93.699.74.45

:[email protected]

MEU-SWE (Mitsubishi Electric Europe B.V Scandinavian Branch)

Hammarbacken 14, Box 750, S-19127, Sollentuna, Sweden

Sales

Technical

Phone

Fax

Phone

Fax

:+46-(0)8-6251070

:+46-(0)8-6251036

:+46-(0)8-6251052

:+46-(0)8-6251036

MEU-UK (Mitsubishi Electric Europe) http://www.mitsubishi.co.uk/evs/

Visual Information Systems Division, Travellers Lane, Hatfield, Hertfordshire, AL10 8XB

Sales

Technical

Phone

Fax

E-mail

Phone

Fax

E-mail

:+44 (1707) 278684

:+44 (1707) 278541

:[email protected]

:+44 (870) 606 5008

:+44 (1506) 431927

:[email protected]

Russia (Mitsubishi Electric Europe B.V Moscow Representative Office)

52, bldg.5, Kosmodamianskaya Nab, 113054, Moscow, Russian Federation

Sales

Technical

Phone

Fax

Phone

Fax

:+7 (095) 721 2070

:+7 (095) 721 2071

:+7 (095) 721 2070

:+7 (095) 721 2071

Printed in China

AW-P0688A

advertisement

Key Features

  • 52-inch LCD Display with 1366 x 768 resolution
  • Variety of connectors and terminals for easy connectivity
  • PIP (Picture-in-Picture) capability
  • Built-in speakers for audio output
  • Power management features for energy efficiency
  • On-Screen-Display (OSD) for easy menu navigation
  • Digital and analog video input options
  • Remote control for convenient operation

Related manuals

Frequently Answers and Questions

How do I connect my personal computer to the monitor?
Refer to the section titled “Connecting a Personal Computer” in the user manual for detailed instructions.
What is the recommended use for this monitor?
The monitor is suitable for both home entertainment and professional use, such as in offices or for public display.
How do I mount the monitor?
Instructions for mounting the monitor are provided in the section titled “How to Mount and Attach Options to the LCD Monitor” in the user manual.
Download PDF

advertisement