Interface User Manual

Interface User Manual
Debit Card Interface
Oracle FLEXCUBE Universal Banking
Release 12.0
[May] [2012]
Oracle Part Number E51465-01
Debit Card Interface
Table of Contents
1.
ABOUT THIS MANUAL................................................................................................................................ 1-1
1.1
1.2
1.3
1.4
1.5
2.
INTRODUCTION ............................................................................................................................................ 1-1
AUDIENCE .................................................................................................................................................... 1-1
ABBREVIATIONS........................................................................................................................................... 1-1
CONVENTIONS USED IN THIS MANUAL ........................................................................................................ 1-1
GLOSSARY OF ICONS .................................................................................................................................... 1-1
DEBIT CARD INTERFACE .......................................................................................................................... 2-1
2.1 INTRODUCTION ............................................................................................................................................ 2-1
2.2 PROCESS FLOW ............................................................................................................................................ 2-2
2.3 MAINTAINING CARD BIN ............................................................................................................................ 2-3
2.4 MAINTAINING CARD TYPE ........................................................................................................................... 2-6
2.5 MAINTAINING DEBIT CARD PRODUCTS........................................................................................................ 2-6
2.6 MAINTAINING CARD STATUS DETAILS ........................................................................................................ 2-8
2.7 MAINTAINING CARD CUSTOMER.................................................................................................................. 2-9
2.8 MAINTAINING CARD ACCOUNTS ................................................................................................................ 2-11
2.8.1
Viewing Cards Summary ................................................................................................................. 2-11
2.9 MAINTAINING CARD MASTER DETAILS ..................................................................................................... 2-12
2.10
GENERATING CARD HANDOFF FILES ..................................................................................................... 2-18
2.10.1
File Format ...................................................................................................................................... 2-19
2.10.2
Uploading Card Status details ......................................................................................................... 2-20
3.
SCREEN GLOSSARY .................................................................................................................................... 3-1
3.1
FUNCTION ID LIST ....................................................................................................................................... 3-1
1.
1.1
About this Manual
Introduction
This manual is designed to help acquaint you with the interface between Oracle FLEXCUBE and
the other systems within your bank.
This manual provides you extensive explanations about the various maintenances required for
the smooth exchange of data between Oracle FLEXCUBE and the applicable systems through
the interface. It also gives you an insight into the processes involved in the actual exchange of
data.
1.2
Audience
This manual is intended for the following User/User Roles:
1.3
1.4
Role
Function
Back office clerk
Input functions for contracts
Back office managers/officers
Authorization functions
Product Managers
Product definition and authorization
End of day operators
Processing during end of day/ beginning of day
Financial Controller / Product Managers
Generation of reports
Abbreviations
Abbreviation
Description
System
Unless and otherwise specified, it shall always refer to Oracle FLEXCUBE
system
EOD
End Of Day
CMS
Card Management System
BIN
Bank Identification Number
Conventions Used in this Manual
Important information is preceded with the
1.5
symbol.
Glossary of Icons
This User Manual may refer to all or some of the following icons.
Icons
Function
1-1
Icons
Function
Exit
Add row
Delete
row
Option
List
1.6
Related Documents

Procedures User Manual
1-2
2.
2.1
Debit Card Interface
Introduction
Oracle FLEXCUBE facilitates the processing of debit card transactions originating from Automatic
Teller Machines (ATM) and POS terminals attached to different branches of your bank.
You will be allowed to capture different types of debit cards in Oracle FLEXCUBE. The cards are
linked to individual customer accounts.
You need to do the following maintenance in Oracle FLEXCUBE for the debit card interface to
work:

Card BIN Maintenance: Card BIN maintenance should be created for every issuer
product that the bank wishes to provide to customers. These BINs would be provided to
bank typically by networks like VISA/MasterCard or by ISO organization. ATM and POS
transaction count and amount limits are maintained for every BIN in this maintenance

Card Type Maintenance: Card Types should be created to uniquely identify the set of
Issuer BINs maintained. For example Visa might issue 433333 and 422222 under
‘Classic’ type and 455555 and 466666 under ‘Gold type’ etc.

Card Product Maintenance: Card product maintenance is to link a given card type to a
card product. You are not able to link multiple card types to same card products. Card
products are linked in Debit Card Product Maintenance to uniquely identify the card
nature that is requested.

Card Status Maintenance: Card status has to be defined as card applied, closed, card
issued, activated, and blocked.

Card Customers Maintenance: Card customer should be maintained.

Card Accounts Maintenance: This maintenance is required for creating the customer
account who wishes to avail the card.

Card Requests Maintenance: This is the master table which stores the card request and
further life cycle details.
2-1
2.2
Process Flow
The following flow diagram depicts the working of the Debit Card Interface:
start
Define Card
Bins with
Limits
Define Card
Customers
Define Card
Types
Define Card
Status
Define Card
Accounts
Define Card
Products
Create Debit Card Request Maintenance
Card Bin ,Type, Product, Limits, Customer, Account, Status
Card Status Query
Card Production Handoff File
Card Status Update
2-2
2.3
Maintaining Card BIN
You have to create Card BIN maintenance for every issuer product that the bank wishes to
provide to customers. You can maintain the details of the card BIN in the 'Card BIN Maintenance'
screen. You can invoke the 'Card BIN Maintenance' screen by typing 'STDBINMT' in the field at
the top right corner of the Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Card BIN
Specify the Bank Identification Number (BIN).
Description
Specify the description of the BIN.
Bank Institution Id
Specify the bank institution code.
Default Renewal Unit
Select the default renewal unit of the cards issued under the card BIN from the drop-down list.
This list displays the following values:

Year

Month

Week

Day
2-3
Default Renewal Cycle
Specify the default renewal unit value of the cards issued under the card BIN.
Example
To indicate that the card should be renewed after every 2 Years when the Default Renewal Unit is Yearly,
you have to specify the Default Renewal Cycle as 2.
ATM Limit
Specify the following details pertaining to ATM limit:
ATM Limit Unit
Select the unit of ATM Limit count for transactions control from the drop-down list. This list
displays the following values:

Year

Month

Week

Day
ATM Count Limit
Specify the number of ATM transactions allowed for the unit defined for ATM.
ATM Amount Limit
Specify the maximum permissible amount for the unit defined for ATM.
Example
Specify 1000 to indicate 1000 account currency per unit.
Remote ATM Limit Unit
Select the unit of ATM Limit count for transactions control, for transactions done from ATMs
outside the bank network, from the adjoining drop-down list. This list displays the following
values:

Year

Month

Week

Day
Remote transaction means transactions done outside the bank network. For example, an ATM
transaction done in ICICI ATM using CITIBANK debit card.
Remote ATM Count Limit
Specify the number of ATM transactions allowed for the unit defined for remote ATM.
Remote ATM Amount Limit
Specify maximum permissible amount for the unit defined for remote ATM.
Example
Specify 1000 to indicate 1000 account currency per unit.
2-4
POS Limit
Specify the following details pertaining to POS limit:
POS Limit Unit
Select the unit of POS Limit count for transactions control from the drop-down list. This list
displays the following values:

Year

Month

Week

Day
POS Count Limit
Specify the number of POS transactions allowed for the unit defined for POS.
POS Amount Limit
Specify the maximum permissible amount for the unit defined for POS.
Example
Specify 1000 to indicate 1000 account currency per unit.
Remote POS Limit Unit
Select the unit of POS Limit count for transactions control from the drop-down list. This list
displays the following values:

Year

Month

Week

Day
Remote POS Count Limit
Specify the number of transactions allowed from a remote POS.
Remote POS Amount Limit
Specify maximum permissible amount for the unit defined for remote POS.
Example
Specify 1000 to indicate 1000 account currency per unit.
2-5
2.4
Maintaining Card Type
You can maintain the card type in the 'Card Type Maintenance' screen. You can invoke the 'Card
Type Maintenance' screen by typing 'STDTYMNT' in the field at the top right corner of the
Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Card Type
Specify the type of the card.
Description
Specify the description of the Card type.
BIN Details
Specify the BIN details here:
Card BIN
Select the BIN for the card issued from the option list. You can associate multiple BINs to the
same card type.
2.5
Maintaining Debit Card Products
You can maintain debit card product in the 'Debit Card Product Maintenance' screen. This screen
links a given card type to a card product (one to one). You are not allowed to link multiple card
types to same card products. Card products are linked to uniquely identify the card nature that is
requested.
2-6
You can invoke the 'Debit Card Product Maintenance' screen by typing 'STDCPROD' in the field
at the top right corner of the Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Card Product
Specify the Product Code.
Description
Specify the description of the specified Card product.
Card Type
Specify the type of Card allowed for the card product.
Expiry Date
Specify the date after which the card product cannot be used.
Debit/Credit Card
Select the type of the card.
GL Account
Specify the GL account for the card from the adjoining option list. The option list displays all the
GL accounts maintained in the system. Choose the appropriate one.
2-7
Offset Account
Specify the offset account for the card from the adjoining option list. The option list displays all the
offset accounts maintained in the system. Choose the appropriate one.
Transaction Code
Specify the transaction code for the card from the adjoining option list. The option list displays all
the transaction codes maintained in the system. Choose the appropriate one.
Other Transaction Code
Specify the other transaction code for the card from the adjoining option list. The option list
displays all the transaction codes maintained in the system. Choose the appropriate one.
2.6
Maintaining Card Status Details
You can maintain the card status in line with the Card Management System in the 'Card Status'
screen. You can invoke the 'Card Status' screen by typing 'STDSTATM' in the field at the top right
corner of the Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Card Status
Specify the status of the card. Initially, when the request for the card is initiated, the card status
will be ‘Card applied’. Later you can change this to any status depending upon the need.
The card status can be of the following:

R – Specify 'R' to indicate the status as Requested

A- Specify 'A' to indicate the status as Activated
2-8

C- Specify 'C' to indicate the status as Closed

Card Issued when the card is sent with PIN and physical card

B - Specify 'B' to indicate the status as Blocked
Theese codes are factory-shipped codes and can be modified at the time of implementation
based on the Card Management System used by your bank.
Description
Specify a description for the status.
2.7
Maintaining Card Customer
You can maintain the card customer in the 'Card Customer Maintenance' screen. You can invoke
the 'Card Customer Maintenance'screen by typing ' STDCUSTM' in the field at the top right
corner of the Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Branch Code
The branch code gets defaulted here.
Customer ID
Select the customer ID from the adjoining option list. The option list displays all the customers
maintained in the system.
2-9
Customer Name
The customer name gets displayed, on selecting the customer id. However, you are allowed to
change the customer name. Based on this the customer name will appear in the card master
screen.
If Card Management System needs extra fields, the same can be maintained as UDFs using this
screen. Click the ‘UDF’ button to maintain User Defined Fields for the CMS.
System validates the following:

if any card customer is open at customer closure level – if any card customer is open that
card customer needs to be closed before customer closure.

if any card customer is closed during customer reopen – if the customer is closed, system
will not allow the card customer to be reopened.
2-10
2.8
Maintaining Card Accounts
You can maintain the customer accounts which can be linked to cards in the 'Card Accounts
Detail' screen. Also you can view the various cards attached to the same account using this
screen. You can invoke the 'Card Accounts Detail' screen by typing 'STDCARDA' in the field at
the top right corner of the Application tool bar and clicking the adjoining arrow button.
Specify the following details in this screen:
Branch Code
Specify the branch code.
Customer ID
Select the Customer ID from the option list.
Customer Account Number
Select the customer account number from the option list.
2.8.1 Viewing Cards Summary
In query mode, you can click 'Cards' button to see the summary of the cards related to the
account.
2-11
If Card Management System needs extra fields, the same can be maintained as UDFs using the
‘Fields’ screen. Click ‘Fields’ Button to invoke the ‘Fields’ screen.
System validates the following:
2.9

if any card customer is open at customer closure level – if any card customer is open that
card customer needs to be closed before customer closure.

if any card customer is closed during customer reopen – if the customer is closed, system
will not allow the card customer to be reopened.
Maintaining Card Master Details
The life-cycle of the card is maintained using the 'Card Master Maintenance' screen, right from
raising card request to the card expiry/renewal. You can invoke the 'Card Master Maintenance'
screen by typing 'STDCRDMS' in the field at the top right corner of the Application tool bar and
clicking the adjoining arrow button.
2-12
This is the master table which stores the card request and further life cycle details. This screen is
used for the following:

To create new card requests

To amend the card status manually( or through online upload )

To query the Card to accounts / Account to Cards linkages by Oracle FLEXCUBE

To generate the handoff file ( new card requests )

To generate the renewal file
Specify the following details:
Branch Code
Branch code gets defaulted to current branch.
Card Product
Specify the product code of the card.
Request Reference Number
This is a system generated number.This reference number is used while doing updates based on
response from CMS.
2-13
Customer No
Specify the customer number in case of request/renewal.
Account No
Specify the Customer Account Number. It is validated against the customer account marked with
‘ATM Facility’.
Card BIN
Select the Card BIN from the option list.
Customer
As part of specifying the details pertaining to customer, you can specify the following:
Name on Card
Customer name gets displayed as maintained in ‘Card Customer Maintenance’ screen. However,
you are allowed to modify it.
Owner ID Type
Specify the type of ID produced.
For example, PAN, Passport, DL etc.
Owner ID Number
Specify the identification number of the applicant.
Additional Holder ID Type
Specify the type of ID produced by additional holder.
For example, PAN, Passport, DL etc.
Additional Holder ID Number
Specify the Identification Number of the additional holder.
Recovery Account
Specify the recovery account here.
Additional Holder Date of Birth
Specify the date of birth of the additional holder from the adjoining calendar.
Additional Holder Relation
Specify the relation of the additional holder with the card holder.
Card
As part of specifying the card details, you can specify the following:
2-14
Primary Card No
In case of Secondary Cards, system displays the Primary Card Number here.
Card Number
It is generated by CMS when the mode is Request/renewal. However, you are allowed to specify
the card number.
Card Sequence Number
Card Sequence Number is generated and displayed by the system. It is the running number
1.2.3….
Primary Card
By default, system considers the first Debit Card issued for an account as the primary card and
hence checks this box. You are not allowed to change the same. System unchecks this box on
subsequent card issued for the same customer account.
Card Application Date
Specify the date of card application.
Card Issued Date
Specify the date of issue of the card.
Card Renewal Date
The date of renewal of the card gets defaulted from the BIN level.
Card Expiry Date
Specify the expiry date of the card.
Card Activation Date
Specify the date of activation of the card.
Issuer
Specify the name of the issuer.
Plastic Type
Specify the card type here.
Credit Card Limit
Specify the credit limit for the customer.
Status
As part of the specifying the satus, you can specify the following:
2-15
Card Dispatch Status
Select the Dispatch Status from the drop-down list to indicate whether the card has been
dispatched or not.
Pin Mailed Status
Select the PIN Mailed Status from the drop-down list to indicate whether PIN has been mailed to
the cardholder or not.
Card Status
Specify the status of the card e.g. Active/Blocked etc.
Last Status Change Date
Specify the date of last status change.
Last Operation
Specify the last operation done on card.
Delivery Channel for Card
Specify the delivery channel for the card dispatch.
Delivery Channel for PIN
Specify the delivery channel for the PIN.
Delivery channel for Card and PIN should be different.
Renewal
As part of the details pertaining to renewal, you can specify the following:
Remarks
Specify comments, if any.
Renewal Unit
Renewal unit gets defaulted here.
Renewal Cycle
Renewal cycle gets defaulted here.
Bill Cycle
ATM
The following details are displayed:
ATM Limit Unit
ATM Limit Unit gets defaulted from BIN.
2-16
ATM Count Limit
ATM Count Unit gets defaulted from BIN.
AMT Amount Limit
AMT Amount Unit gets defaulted from BIN.
Remote ATM Limit Unit
Remote transactions allowed through ATM unit gets defaulted.
Remote ATM Count Limit
Remote transactions unit allowed through ATM gets defaulted.
Remote ATM Amount Limit
Remote transactions allowed amount through ATM gets defaulted.
POS
The following details are displayed:
POS Limit Unit
POS Limit Unit gets defaulted from BIN
POS Count Limit
POS Count Unit gets defaulted from BIN
POS Amount Limit
POS Amount Unit gets defaulted from BIN
Remote POS Limit Unit
Remote transactions allowed through POS unit gets defaulted.
Remote POS Count Limit
Remote transactions unit allowed through POS gets defaulted.
Remote POS Amount Limit
Remote transactions allowed amount through POS gets defaulted.
2-17
2.10 Generating Card Handoff Files
You can generate handoff files in Card Info handoff file format using the 'Card Handoff Batch'
screen. You can invoke the 'Card Handoff Batch' screen by typing 'DCDBATCH' in the field at the
top right corner of the Application tool bar and clicking the adjoining arrow button. This batch can
be configured as either ad-hoc run or EOD run. It generates the 'Oracle FLEXCUBE Specific
CMS Handoff Format'.
Click ‘Run’ button in this screen to run the handoff batch.
2-18
2.10.1 File Format
The format of the handoff file genrated is broadly structured as given below:

Request 1




Request 2



Seq#
<Customer record >CRLF
<Account record>CRLF
<Card record>CRLF
<Customer record>CRLF
<Account record>CRL
<Card record>CRLF
Field Name
Size
Remarks
Customer Record (Source STTM_CUSTOMER)
1
Bank code
10
DCTM_CARD_ISS_BIN..BANK_INST_ID
2
Branch code
3
Customer local branch
3
customer code
9
4
customer type
1
5
Last name
FC size
6
First name
FC size
7
Short name
FC size
8
Sex
1
0 - male, 1-female,
9
Married
1
0 -single, 1 - married, 2 - divorced, 3seperatd
10
Address 1
FC size
11
Address 2
FC size
12
Address 3
FC size
13
Address 4
FC size
14
City
FC size
15
Pin Code
FC size
16
work Phone
FC size
17
Home Telephone
FC size
0 - bank, 1 -individual, 2 - corporate
Account Record(Source STTM_CUST_ACCOUNT)
2-19
Seq#
Field Name
Size
Remarks
1
Bank code
10
DCTM_CARD_ISS_BIN..BANK_INST_ID
2
Branch code
FC size
Account branch
3
Customer code
FC size
4
Account number
FC size
5
Account currency
FC size
6
Account currency
numeric
FC size
7
Account type
2
10 -current, 20- savings
Card Record(Source DCTM_CARD_MASTER)
1
bank code
10
2
FC_reference_no
3
Branch code
FC size
4
customer code
FC size
5
Account number
FC size
6
Card Product code
4
DCTM_CARD_MASTER.CARD_PRODUC
T
7
Primary/secondary card
1
0 - primary, 1 - secondary
8
Card status
1
1 - request
9
PAN
This need to be used by CMS when
sending card status change
Not used
You can define the required format for the handoff file through the Generic Interface module, in
case a different format is required.
2.10.2 Uploading Card Status details
You can upload the new card details into Card Master Maintenance through Incoming Generic
Interface module. Similarly, you can upload card status details or any amendments through
Generic Interface module.
2-20
3.
Screen Glossary
3.1 Function ID List
The following table lists the function id and the function description of the screens covered as part
of this User Manual.
Function ID
Function Description
DCDBATCH
Card Handoff Batch
STDBINMT
Card BIN Maintenance
STDCARDA
Card Accounts Detail
STDCPROD
Debit Card Product Maintenance
STDCRDMS
Card Master Maintenance
STDCUSTM
Card Customer Maintenance
STDSTATM
Card Status
STDTYMNT
Card Type Maintenance
3-1
Debit Card Interface
[May] [2012]
Version 12.0
Oracle Corporation
World Headquarters
500 Oracle Parkway
Redwood Shores, CA 94065
U.S.A.
Worldwide Inquiries:
Phone: +1.650.506.7000
Fax: +1.650.506.7200
www.oracle.com/ financial_services/
Copyright © [2012] Oracle Financial Services Software Limited. All rights reserved.
No part of this work may be reproduced, stored in a retrieval system, adopted or transmitted in any form or by any means,
electronic, mechanical, photographic, graphic, optic recording or otherwise, translated in any language or computer
language, without the prior written permission of Oracle Financial Services Software Limited.
Due care has been taken to make this document and accompanying software package as accurate as possible. However,
Oracle Financial Services Software Limited makes no representation or warranties with respect to the contents hereof and
shall not be responsible for any loss or damage caused to the user by the direct or indirect use of this document and the
accompanying Software System. Furthermore, Oracle Financial Services Software Limited reserves the right to alter,
modify or otherwise change in any manner the content hereof, without obligation of Oracle Financial Services Software
Limited to notify any person of such revision or changes.
All company and product names are trademarks of the respective companies with which they are associated.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement