MOD. RB RB-L RB CABLE
WUNDER SA.BI. SRL
USER MANUAL
www.wunder.it
PROFESSIONAL ELETTRONIC MDD SCALE
MOD. RB RB-L RB CABLE
USER MANUAL
Read this manual carefully before using the instrument
INDEX
2.
GENERAL RULES………………………………………………………………………………………………………………………………………….
PAGE 2
3.
SAFETY…………………………………………………………………………………………………………………………………………………...
PAGE 3
4.
TECHNICAL SPECIFICATION……………………………………………………………………………………………………………………………
PAGE 3
5.
INDICATOR………………………………………………………………………………………………………………………………………………..
PAGE 4
6.
INSTALLATION………………………………………………………………………………………………………………………………………………
PAGE 5
7.
INSTRUCTION FOR USE ………………………………………………………………………………………………………………………………….
PAGE 5
8.
PRINTER FUNCTIONS……………………………………………………………………………………………………………………………………..
PAGE 8
9.
SETTING SETUP…………………………………………………………………………………………………………………………………………..
PAGE 9
10.
ERROR MESSAGE………..………………………………………………………………………………………………………………………………..
PAGE 10
11.
MAINTENANCE AND ASSISTANCE……………………………………………………………………………………………………………………….
PAGE 10
12.
CONFORMITY……………………………………………………………………………………………………………………………………………….
PAGE 10
13.
IDENTIFICATION LABELS.................................................................................................................................................................................
PAGE 11
14
SCRAPPING AND WASTE DISPOSAL …………………………………………………………………………………………………………………..
PAGE 11
16.
WARRANTY…………………………………………………………………………………………………………………………………………………..
PAGE 12
16.
ASSEMBLY-USE MECHANICAL TELESCOPIC HEIGHT METER (OPTIONAL)…………………………………………………………………….
PAGE 13
17
THERMAL PRINTER (OPTIONAL)………………………………………………………………………………………………………………………..
PAGE 15
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
1
WUNDER SA.BI. SRL
USER MANUAL
By choosing the WUNDER mod. RB or RB-L or RB cable professional electronic scale, you have purchased a high precision instrument.
Since over 40 years WUNDER has placed its experience at the service of health. This instrument is compliant with national standards in hospitals and clinics with medical
class I with measurement function and is calibrated in conformity with accuracy class III.
The instrument is characterised by the possibility of fixing the electronic terminal to the weighing platform by means of a column or else installing the terminal autonomously.
The instrument is equipped with a dual LCD electronic terminal with triple reading to simultaneously view Weight, Height. and BMI
2. GENERAL RULES
Carefully read this manual before using the instrument as it supplies
important indications concerning OPERATING SAFETY AND MAINTENANCE.
The descriptions and illustrations supplied in this manual are not binding.
WUNDER reserves the right to modify its products as deemed convenient in order to approve them without being committed to update this publication.
Conventions:
The following symbols have been used in this manual:
0470 MEDICAL CERTIFICATION
METROLOGICAL CERTIFICATION AND APPROVAL FOR MEDICAL USE
ACCURACY CLASS
ASSISTANCE WARRANTY CERTIFICATE
ATTENTION!
PLACED BEFORE DETERMINING PROCEDURES. COMPLIANCE FAILURE CAN DAMAGE THE PRODUCT
WARNING!
PLACED BEFORE DETERMINING PROCEDURES. COMPLIANCE FAILURE CAN HARM THE OPERATOR OR PATIENT OR DAMAGE
THE PRODUCT
WASTE DISPOSAL
TYPE B PARTS SUPPLIED
BATTERY POWER
INDICATION OF WEIGHT FUNCTIONALITY
INDICATION OF STABLE WEIGHT
INTERFERENCE COULD OCCUR NEAR THE APPLIANCES
DUAL INSULATION
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
2
WUNDER SA.BI. SRL
USER MANUAL
3. SAFETY
WARNINGS!
Operators must read this manual carefully, comply with the instructions it contains and become familiar with the correct use and maintenance
procedures of the instrument.

Retain this manual for consultation and as a help in staff training

Do not overload the instrument beyond its maximum capacity

Do not apply loads abruptly.

Do not press the keys with sharp or pointed objects

Do not try to open the instrument.

Do not remove seals from the instrument.

Do not short-circuit the battery terminals

Use only the power supply provided by Wunder. Before using it, make sure that the local mains voltage is compatible with the voltage of the adapter
shown on the identification plate

Regularly check the integrity of the instrument's power cord and make sure it does not come in contact with hot appliances

Make sure that the power cord does not create obstruction hazards

Unplug the instrument before cleaning it

Do not place the instrument in water or other liquids

Perform maintenance and subsequent metric verifications regularly
4. THECHNICAL SPECIFICATION
RB L
RB with cable
Model
RB Basic
RB Medium
Capacity
200kg
300 kg
200kg
Division
50-100g
100 g
50-100g
MDD OIML
Class III
Unit weight
kg
Display
LCD 1” con 5 digits attivi
Function Key
ON / ZERO / OFF, HOLD / BMI, TARA, PRINT
Power
Rechargeable Batteries Pack- Adapter 12 V - 2 A
Operation temperature
da 5°C a 35°C
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
3
WUNDER SA.BI. SRL
USER MANUAL
5. INDICATOR
1.Weighing capacity and division
5
2.Key function
3.Main LCD: Weight
3
4.Second LCD automatically calculates BMI
4
5.Power display
1
2
Key functions
Key
Description
Key ON. To reset the display (OFF) continuos press 3 seconds. Zero the scale (±2% of full capacity)
To hold weighing result on the display/ determine stable weighing value. Function BMI
Tare un-wanted weight
Print uot data.
Function Display Symbols
Net weight
Stable symbol: To indicate that the weight is stable.
Weight stable
Minor weight: Weight under zero.
kg
Zero symbols: Weight is at zero point.
Low battery: Battery need to charge or replaced.
Weight minor
Zero
Low Battery
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
4
Hold function
Weight
WUNDER SA.BI. SRL
USER MANUAL
6. INSTALLATION
ATTENTION!
ONLY FOR COLUMN SCALE
After removing the instruments from the packing check the integrity and right contents
Put the scale far from souce from of heat e vibration.
Put the scale on stable surface.
Assembly
Assembling column to the platform

Connecting wire between column and platform first

Flip the scale platform on the bench

Fix with 4 screw the column at the platform

Place to the ground the scale and adjust the 5 adjustable feet.

For use connect the external power supply with the electric current
7. ISTRUCTION FOR USE
7.1Time setting
Long press PRINT key for 3 seconds to enter the TIME SETTING mode, beginning with the top row, with the flashing digit. Press PRINT key after
successful change to move to next step.
EX: To input Dec 25, 2008, 8:00am.
Enter year: Using TARE keys to decrease the value, press HOLD key to move to next digit.
Press PRINT key after successful entry to move to next stage.
Enter date: Using TARE keys to decrease the value, press HOLD key to move to next digit.
Press PRINT key after successful entry to move to next stage.
Enter time: Using TARE keys to decrease the value, press HOLD key to move to next digit.
Press PRINT key after successful setting.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
5
WUNDER SA.BI. SRL
USER MANUAL
Display Format YYYY→MM.DD→TT:SS
7.2 Instruction for charging and connecting
If
prompt displays on the LCD, please charge the scale with exclusive adaptor.
Locate adaptor plug on the rear side of indicator.
The battery should be recharged at least every 3 months regardless if it is used or not. After a long period in storage, e.g. over 3 months, the battery should
run a full cycle (charge/discharge) to allow it to restore to full capacity.
Ac Jack connector
7.2a Rechargeable Batteries
1.
Open the battery cover, and take the battery out.
2.
Disconnect the rechargeable battery pack then replace it by a new one.
Put the battery back then arrange the connector in place well.
7.3Weighing
Switch on the scale using
key. The diagnostic scale self-check is performed and the software version is displayed.
The „0,00 kg” weight displays on the screen, now the scale is ready for weighing.
Note: If display is not at 0.0kg while switching power on. Kindly press
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
key to zero the scale which can be used at any time to zero the scale.
6
WUNDER SA.BI. SRL
USER MANUAL
7.4 Hold function
The scale is provided with the integrated hold function to determine the average weight. It enables people to be weighed accurately although they are not
still on the scale platform.
 Switch ‘ON’ the scale using [ON/ZERO/OFF] key. The diagnostic self-check will be performed and after that „0.0 kg” will display on the screen with
‘stable’ and ‘zero sign’.
 Move the object/ person on the scale platform.
 Press the [HOLD/BMI] key once. The ‘HOLD’ will display on the screen with blinking triangle and after few seconds the average of fluctuating weight
will display on the screen and will lock on the display.
 To release the locked weight on display simply press the [HOLD/BMI] key again and the display will return to normal mode automatically.
 [HOLD/BMI] key function can be activated before or after putting the weight on the tread platform. But in case of weighing unstable person it is
recommended to press [HOLD/BMI] key after the person moves on the tread platform.
7.5 BMI function
In normal mode, long press [HOLD/BMI] key 3sec to enter into BMI mode.
The second display will show last height and the extreme left digit will blink.
Use [TARE] to decrease value and press HOLD to change to next digit. Press [ON/ZERO/OFF] key to confirm height
value.
When the display shows “Hold”, please stand on the scale platform, Proceed to weigh as normal. The instrument will
show the weight, height, and BMI value.
To release the locked weight on display simply press the [HOLD/BMI] key again and the display will return to normal mode
automatically.
7.6 Tare function
Tare allows the user to zero the instrument to cancel the weight of a container/ clothes from the reading of the instrument, thus giving the true weight of the
product/ person being tested.
Turn on the scale using
key.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
7
WUNDER SA.BI. SRL
When
Press
USER MANUAL
displays on the screen and scale beeps twice, Place the object (clothes) need to be tare on the tread platform.
after the weight stabilizes and stable sign appears on the display.
Display will return to
Place the item/ baby need to be weighed (without removing the tare object). The weighing result is the Net weight of the item / baby.
To delete the saved tare value, remove the tare object from the tray and press
key again.
8. PRINTER FUNCTIONS
Weight can be printed for records using RS232 interface cable.After weighing simply press PRINT key to print out the results
The format presented below is the standard format of results print-out and cannot be changed.
More informations [email protected] or [email protected]
Set parameters of the scale interface on the connected device. It is not possible to change the scale
parameters.
Baud rate: 9600 bps
Parity check: None
Data length: 8 bits
Stop bit: 1 bit
Handshake: RTS/CTS
Data code: ASCII
Serial RS232
Connector RS232
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
8
Piedino
2
3
Segnale
TXD
5
GND
RXD
WUNDER SA.BI. SRL
USER MANUAL
Connecting with PC

Start Hyper Terminal
Start Hyper Terminal program from clicking
Start Menu → Programs → Accessories → Communication → Hyper Terminal.

New Connection Description
Give new connection a name then click OK.

Select Your COM Port
Click Connect to select your COM port. Usually there’s only one option for select. Then click OK.

Port Settings
Click Bits per second to set up rate at 9600, Data bits at 8, Parity at None, Stop bits at 1 and Flow control at Hardware. Then click OK to complete your
setting.

Output Data
When press the PRINT key to output data from scale to PC or an Optional Printer.
9. SETTING SETUP
Switch ON the scale and long press
key for 3 seconds, first “SETUP” and then “A.OFF” will display successively.
AUTO-OFF TIME SETUP
This enables operator to select the auto turn OFF time of the device.
BUZZER ON/OFF SETUP
This enables operator to select beep sound ON/OFF.
Note: To confirm the settings, please press
when
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
displays on the display.
9
WUNDER SA.BI. SRL
USER MANUAL
10.ERROR MESSAGE
11. MAINTENANCE AND ASSISTANCE
For better and longer duration of the product it should receive thorough general cleaning periodically.
The instrument must be cleaned with a soft cloth moistened with water or neutral detergent, without using solvents or abrasive substances. If the instrument
remains idle for a long period, remove the batteries from the terminal.
During shipping, make sure not to subject the instrument to blows or excessive mechanical stress.
In case of repairs or assistance, contact your dealer or an authorised service centre contacting [email protected] or [email protected]
12. CONFORMITY
WUNDER MODEL RB or RB-L or RB CABLE ELECTRONIC SCALE SERIAL N°...............................................................
We hereby certify that this instrument has been inspected and has successfully passed the functional test.
Itcomplies with the following standards and directives:
EN 45501 / EN60601-1-2 / EN60601-1
93/42/EEC – Medical Devices Directive
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
10
WUNDER SA.BI. SRL
USER MANUAL
13.IDENTIFICATION LABELS
14. SCRAPPING AND WASTE DISPOSAL
If set aside for a long period, protect those parts which could be damaged due to dust build-up
Scrapping
When you decide to no longer use this item, we recommend making it unusable. We also recommend making those parts which could be sources of danger harmless
Waste disposal
EU 2002/96/EC
This product complies with the EU Directive 2002/96/EC. The symbol of the crossed-out waste bin on the appliance indicates that the product, needing to be treated separately
from household waste, at the end of its useful life must be completed in a separate collection facility for electric and electronic appliances or returned to the dealer upon
purchase of a new equivalent appliance. The user is responsible for bringing the appliance to an appropriate collection structure at the end of its life. Appropriate separate
collection and sending the appliance for recycling, treatment and environmentally compatible waste disposal contributes to avoid possible negative effects on the environment
and health and favours the recycling of the materials the product is made of.
For more detailed information regarding available collection systems, contact your local waste disposal service or the shop where the product was purchased.
As consumers, you are obliged by law to return used or dead batteries. You may deposit old batteries at public collection spots in your town or else with any battery dealer who
has placed specific collectors for this purpose. Even when scrapping electric and electronic appliances, they must be removed and deposited in specific collectors.
NOTE: The following symbols indicate the presence of harmful substances
Pb Pb = batteries containing Lead
Cd Cd = batteries containing Cadmium
Hg Hg = Batteries containing Mercury
ATTENTION!
Do not throw electric parts and used batteries away with household waste. Dispose of the batteries by means of your closest collection centres.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
11
WUNDER SA.BI. SRL
USER MANUAL
15. WARRANTY
This certificate must be kept until the warranty has expired.
It must be presented together with the invoice, tax receipt or delivery note providing the name of the dealer and date of purchase whenever a technical
intervention is required. Otherwise the user will lose any warranty rights.
The warranty takes effect from the date of purchase and is valid during the entire period foreseen by the current catalogue/pricelist.
By warranty we mean the replacement or repair free of charge of parts making up the appliance which, at the discretion of the manufacturer, are deemed
faulty from the origin; Wunder therefore has the faculty of repairing or replacing the item.
The warranty does not cover:
 shipping faults, damage caused by falls, carelessness or tampering
 damage caused by incapability of using the appliance and of its improper use
 damage caused by an insufficient or inadequate electrical system or alterations resulting from environmental, climatic or other types of conditions
 damage due to incorrect installation of the appliance and repairs carried out by unauthorised personnel
 Interventions at home for convenience controls or presumed defects
 Routine maintenance and that which can be considered normal wear from use
 consumables such as: power supplies, batteries, keyboards, plates, wheels, heads, rolls, load cells faulty due to blows or overloads
Service can also be refused when the appliance has been changed or transformed in any way.
In case of interventions at one's home, the customer must pay the fixed fee; if however the appliance is repaired at an authorised Wunder Service Centre,
expenses and relative travel risk are borne by the user.
Wunder will not be held liable for damage of any nature caused directly or indirectly to persons, animals or objects resulting from failure to
comply with all the instructions indicated in this manual or anyway resulting from improper use.
The Court of Bergamo has jurisdiction in case of any dispute
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
12
WUNDER SA.BI. SRL
USER MANUAL
16. ASSEMBLY-USE MECHANICAL TELESCOPIC HEIGHT METER (OPTIONAL)
ATTENTION!
ONLY FOR COLUMN SCALE
HEIGHT ROD KIT
1.Metal support for
telescopic height meter
side view metal support
2. Black abs support height
meter
3.Screws
A)
B)
C)
N°02 screws T.E.
N°02 slotted screws
N°01 Allen Screws
(M5x16)
(M5x25)
(M6x12)
D)
E)
N°02 nuets ø 5
N° 02 washers ø 5
4.Tools
Tools
Allen tools
Picture 1: Assemble white metal support with abs black part white the screws (B+E). Lock all with the screws (D)
1
1a
Picture 2-2a: behind the pole (column) assemble the white metal support with screws (B).
Picture 2b: the position is on the right
2
2a
2b
Picture 3-3a: assemble the height rod on black abs support with screws (C) and allen tools kit
Picture 3b: The height rodi s ready for use.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
13
WUNDER SA.BI. SRL
USER MANUAL
3a
3
3b
MEASURING OVER 131 cm
MEASURING UNDER 130 cm
Pull up the height meter rod
1
1
Press the black button and
measuring height and push down
Position it horizontally
2
2
Lower the rod up to the point
where the lever
rests head
Position it horizontally
touches the patient's head.
The height can be read at
3
the point 'A'
3
Lower the rod up to the point in which
the blade rests head touches the
patient's head.
The height can be read at point 'B'.
4
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
14
WUNDER SA.BI. SRL
USER MANUAL
17. THERMAL PRINTER (OPTIONAL)
Read this manual carefully before using the instrument
Platen Rollen
Roll Holder
Tear Bar
Printer Button
Status Indicator
RS 232 connect
ON/OFF
Power
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
15
WUNDER SA.BI. SRL
USER MANUAL
17.1. HOW TO USE YOUR PRINTER
Connect the AC Adaptor and RS232 interface cable. Press the I/O button to power on the printer.
The PRINTER XL printer can be connected via the RS232 port and cable with the RA200 XL.
Press the PRINT key.
Print double language
CHANGING THE PAPER ROLL
The paper print roll on a PRINTER XL printer is changed as follows:
1. Open the upper cover and position the paper roll so that it
feeds in the right direction.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
2.Feed the end of the paper roll through the printer cover and
close the cover. The printer is ready to print.
16
WUNDER SA.BI. SRL
USER MANUAL
17.2. PRINTER SPECIFICATION
ITEM
SPECIFICATION
Printing method
Thermal dot line printing
Number of dots
384 dot/line
Resolution (dots/mm)
8 dot/mm
Printing width (mm)
48 mm
Max. paper thickness (μm)
80μm
Paper
57.5±0.5 mm (W) x ψ30mm max
Paper loading
Easy loading
Printing speed (mm/s)
75 mm/s
Dimensions (L x W x H )
120 x 80 x 50mm
Operating temperature ( )
0 to 50
Operating humidity (%)
20% to 85% (no condensation)
Interface
Conform to RS232
Voltage range (adaptor only)
12V 2A
SHOCK HAZARD WARNING
The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result.
MEDIA WARNING
Always use high quality approved paper print roll. The approved product can be ordered from your dealer.
RELOADING HINT
If printer runs out of paper roll while printing, switch the power off and reload paper roll. Power on and print again.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
17
WUNDER SA.BI. SRL
USER MANUAL
17.3. ERROR MESSAGES
Problem
Status Indicator does not light when power
switch is turned to ON (I) position.
Solution or Reason
Check the power connections from AC outlet to the printer power supply.
Status indicator illuminated (green light), but
Check interface cable connections from the scale to printer.
the printer will not print.
Make sure the top cover is closed and locked.
Printer paper jammed.
Reset the paper roll. Please refer to “CHANGING THE PAPER ROLL”.
Status Indicator is flashing green.
Paper roll is out. Reload a new source of paper roll so the printer can continue printing. Please refer
to “CHANGING THE PAPER ROLL”.
RB-RB-L-RB Cable(WU150) REV. 00- 15/03/2013
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement