Magnavox DP170MW8B - 1080P Upconversion DVD Player Owner`s manual

Magnavox DP170MW8B - 1080P Upconversion DVD Player Owner`s manual
Owner’s Manual
Please read before using this unit.
DVD/CD Player
remote control
(NA475UD)
RCA audio/video cables
(WPZ0102TM018 /
WPZ0102LTE01)
AAA (1.5V)
battery x 2
owner’s manual
(1VMN28597)
Owner’s Manual
PRECAUTIONS
Laser Safety ...............................................................................................2
Important Safeguards .............................................................. 3
Location and Handling .........................................................................4
Avoid the Hazards of Electrical Shock and Fire ...........................4
Moisture Condensation Warning......................................................4
About Copyright......................................................................................4
Notice for Progressive Scan Outputs...............................................4
Symbols Used in this Manual .............................................................4
Maintenance .............................................................................................4
About the Discs......................................................................... 5
Playable Discs...........................................................................................5
Unplayable Discs.....................................................................................5
SETUP
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible to
connect this unit to your TV by using an RF modulator. In
this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC
outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either
3 or 4, whichever the TV channel is least used in your
area. If your RF modulator has a modulator/antenna
switch, set it according to the manual supplied with the
RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to. For
more details, follow the manual supplied with the RF
modulator.
rear of this unit
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
AUDIO
OUT
VIDEO
OUT
CB/PB
DIGITAL
AUDIO OUT
HDMI OUT
L
RCA video cable
R
rear of TV
AUDIO
OUT
VIDEO
OUT
RCA audio cable
rear of your RF
modulator
VHF / UHF
antenna
ANT. IN
RF coaxial cable
or
cable TV
company
RF coaxial
cable
ANT. IN
3
4
CHANNEL
R
L
AUDIO IN
VIDEO IN
TO TV
Set channel 3 or 4
Note:
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
Connections .............................................................................. 6
Connection to a TV
V ................................................................................. 6
Connection to a TV with an HDMI Compatible Port ..................7
Connection to an Audio System .......................................................8
Function Overview
w ................................................................... 9
Rear Terminals ..........................................................................................9
Front Panel Indicator .............................................................................9
HDMI Setup ...............................................................................................9
Remote Control ......................................................................................10
Installing the Batteries for the Remote Control ..........................10
DVD FUNCTIONS
Playback
k .................................................................................. 11
JPEG Playback
k ......................................................................... 12
Kodak Picture CD..................................................................... 12
Transition Mode ...................................................................... 13
Adjustment of Picture Size ...................................................... 13
On-Screen Displayy ................................................................... 14
Search Functions ..................................................................... 15
Using Track Search ................................................................................15
Using Title / Chapter Search ..............................................................15
Using Time Search .................................................................................15
Marker Setting.........................................................................................15
Repeat / Random / Programmed Playback
k ............................ 16
Repeat Playbackk ..................................................................................... 16
Repeat A-B Playbackk ............................................................................. 16
Random Playbackk .................................................................................. 16
Programmed Playback.........................................................................
k
16
Special Settings ....................................................................... 17
Subtitle Language..................................................................................17
Audio Language .....................................................................................17
Camera Angles ........................................................................................17
Black Level Setting.................................................................................17
Stereo Sound Mode ..............................................................................17
Virtual Surround .....................................................................................17
DVD Setting ............................................................................. 18
LANGUAGE Setting................................................................................18
DISPLAY Setting......................................................................................19
AUDIO Setting .........................................................................................20
PARENTAL Setting .................................................................................21
OTHERS Setting.......................................................................................22
Reset to the Default Setting (Except for PARENTAL Setting) 23
SETUP
Contents
INFORMATION DVD FUNCTIONS
Supplied Accessories
Español
DP170MW8B
PRECAUTIONS
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
INFORMATION
Troubleshooting Guide ........................................................... 23
Specifications .......................................................................... 24
Language Code Listt ................................................................. 24
LIMITED WARRANTY................................................................
Y
24
Españoll .................................................................................... 27
Quick Use Guide............................................................ Back Cover
or visit our web site at
www.magnavox.com/support
© 2009 Funai Electric Co., Ltd.
E6E76UD_DP170MW8B_EN_v1.indd 1
2009/10/27 21:28:33
PRECAUTIONS
WARNING: TO
PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
PRECAUTIONS
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The caution marking is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due
to possible eye injury.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. DO NOT
STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose
the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with
your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special wastes.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this information
for future reference.
Model No. ________________________
Serial No. ________________________
EN
E6E76UD_DP170MW8B_EN_v1.indd 2
–2–
2009/10/27 21:28:38
1.
Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of
the loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6. Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
PORTABLE CART WARNING
8. Accessories - Do not place this video
(Symbol provided by RETAC)
product on an unstable cart, stand, tripod,
bracket, or table. The video product may
fall, causing serious injury to a child or
adult, and serious damage to the appliance.
Use only with a cart, stand, tripod, bracket, S3125A
or table recommended by the manufacturer, or sold with the video product. Any mounting of the
appliance should follow the manufacturer's instructions
and should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
9. Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This video
product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This video product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the video product due to
lightning and power-line surges.
14. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into
this video product through any openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
video product.
17. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
18. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
e. If the video product has been dropped or damaged in any
way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
19. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
20. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in proper
operating condition.
21. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
PRECAUTIONS
Important Safeguards
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
–3–
E6E76UD_DP170MW8B_EN_v1.indd 3
EN
2009/10/27 21:28:39
Location and Handling
Maintenance
PRECAUTIONS
• Do not stand this unit up vertically. Install this unit in a horizontal
and stable position. Do not place anything directly on top of this
unit. Do not place this unit directly on top of the TV.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if this unit is placed too close to your
TV. In this case, please ensure enough space between your TV
and this unit.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
• Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
authorized service center immediately.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this unit.
For service and adjustment inside the cabinet, call a qualified
dealer or an authorized service center.
• Be sure to remove disc and unplug the AC power cord from the
output before carrying this unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our authorized service
center for servicing.
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 23 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
Cleaningg the Cabinet
• Wipe the front panel and other exterior surfaces of the unit with
a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
Cleaningg Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Cleaningg the Disc Lens
• If this unit continues to perform improperly even after
you have referred to the relevant sections and to the
“Troubleshooting Guide” in this manual, the laser optical pickup
unit may be dirty. Consult your dealer or an authorized service
center for inspection and cleaning of the laser optical pickup
unit.
Moisture Condensation Warning
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm
environment.
If moisture forms inside this unit, it may not operate properly or
damage the disc. In such case, do not use this unit at least for 2
hours until its inside gets dry.
Disc Handlingg
• When you handle a disc, hold it by its edge and try not to touch
the surface of the disc.
• Always store the disc in its protective case when not in use.
© 2009 Funai Electric Co., Ltd.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of picture problems with
525 progressive scan output, it is recommended that the user
switch the connection to the ‘standard definition’ output. If
there are questions regarding your TV set compatibility with this
525p DVD player, please contact our customer service center.
Symbols Used in this Manual
Servicingg
All rights
g
reserved. No part
p of this manual mayy be
reproduced,
p
copied,
p
transmitted, disseminated,
transcribed, downloaded or stored in anyy storage
g
medium, in anyy form or for anyy purpose
p p
without the
express
p
prior
p
written consent of Funai. Furthermore, anyy
unauthorized commercial distribution of this manual or
any revision hereto is strictly prohibited.
Information in this document is subject
j
to change
g
without notice. Funai reserves the right
g to change
g the
content herein without the obligation
g
to notify any
person or organization of such changes.
with the
design
g is a registered
g
trademark of
Funai Electric Co., Ltd and mayy not be used in anyy wayy
without the express
p
written consent of Funai. All other
trademarks used herein remain the exclusive property
p p y of
their respective
p
owners. Nothing
g contained in this manual
should be construed as granting,
g
g byy implication
p
or
otherwise, anyy license or right
g to use anyy of the
trademarks displayed
p y herein. Misuse of anyy trademarks
or anyy other content in this manual is strictlyy prohibited.
p
Funai shall aggressively
gg
y enforce its intellectual property
rights to the fullest extent of the law.
The following symbols appear in some headings in this manual.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to CD-RW/-R with JPEG files.
Products that have earned ENERGY STAR® are
designed to protect the environment through
superior energy efficiency.
EN
E6E76UD_DP170MW8B_EN_v1.indd 4
–4–
2009/10/27 21:28:40
About the Discs
Playable Discs
Mark (logo)
DVD-video
Region code
Recorded
signals
Media size
digital video
(MPEG2)
5 inches
(12 cm)
or
3 inches
(8 cm)
Disc types
or
*1, 2, 3, 5, 9
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9, 10
e.g.)
title 1
title 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2
PRECAUTIONS
Type of
media
DVD+RW
DVD+R
*1, 3, 4, 5, 8, 9
audio CD
audio CD
*3, 5, 9
CD-RW
CD-R
*3, 4, 5, 8, 9
digital audio
digital audio
or
JPEG
Kodak
Picture CD
e.g.)
track 1
5 inches
(12 cm)
or
3 inches
(8 cm)
JPEG
e.g.)
file 1
track 2
track 3
track 4
track 5
file 4
file 5
folder 1
file 2
file 3
track 6
folder 2
file 6
JPEG
*3, 4, 5, 8, 9
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
If you cannot play back a disc which bears one of the marks above, check the following.
*1:
*2:
*3:
*4:
*5:
*6:
*7:
*8:
*9:
*10:
This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.
Scratched or stained discs may not be played back.
Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.
You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending
on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
Only discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the
picture or sound may not be smooth, etc.).
If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.
Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Discs recorded in the VR (video recording) format cannot be played back.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM, DVD-audio, CD-i, photo CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM
for personal computers
On the following disc, the sound MAY NOT be heard.
super audio CD
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer
cannot be delivered.
Any other discs without compatibility indications
–5–
E6E76UD_DP170MW8B_EN_v1.indd 5
EN
2009/10/27 21:28:42
SETUP
Connections
Connection to a TV
analog audio
TV
standard picture
AUDIO IN
good picture
better picture
COMPONENT
VIDEO IN
S-VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
L
Y
R
or
and
or
CB
Y
or
PB
AUDIO IN
L
R
VIDEO IN
CR
RCA audio cable
RCA video cable
S-video cable
PR
component video cable
SETUP
This unit
L
L
Y
Y
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
R
R
AUDIO
OUT
VIDEO
OUT
CB/PB
DIGITAL
AUDIO OUT
R
HDMI OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
OUT
CB/P
AUDIO OUT
VIDEO
OUT
AUDIO
OUT
S-VIDEO
OUT
CB/PB
VIDEO OUT
VIDEO
OUT
CB/PB
DIGITAL
AUDIO OUT
HDMI OUT
COMPONENT
VIDEO OUT
S-VIDEO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set
“PROGRESSIVE” to “ON” in “DISPLAY” menu. Refer to pages 18-20 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at
all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on
the front of the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
Kenwood:
LXI-Series:
Magnavox:
EN
E6E76UD_DP170MW8B_EN_v1.indd 6
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
–6–
2009/10/27 21:28:51
Connection to a TV with an HDMI Compatible Port
A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) connector allows digital transfer of
the digital images of DVD-video and other devices.
TV
HDMI IN
SETUP
This unit
HDMI OUT
When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you
do not need the analog audio connection described on page 6.
Cables not included.
Please purchase the necessary cables at your local store.
Actual output
p modes byy media
DOLBY DIGITAL Setting
Audio Recording Format
DVD-video
BITSTREAM *1
PCM
Dolby Digital
Dolby Digital
2channel PCM
LPCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
audio CD
*1 If the connected device is not compatible with HDMI BITSTREAM, signals are output on PCM.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device
(or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP
is copy protection technology that comprises data encryption and authentication of the connected AV device.
This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Note:
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot
be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the device that is
connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device
such as this, audio signals are not output from the HDMI output connector.
• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
–7–
E6E76UD_DP170MW8B_EN_v1.indd 7
EN
2009/10/27 21:28:53
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Dolby Digital decoder,
MD deck or DAT deck
digital audio
input jack
Audio
L
R
analog audio
input jacks
RCA audio cable
COAXIAL
digital audio coaxial cable
This unit
L
SETUP
L
Y
CR/PR
Y
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
COMPONENT VIDEO OUT
COAXIAL
R
R
AUDIO
OUT
VIDEO
OUT
CB/PB
DIGITAL
AUDIO OUT
R
HDMI OUT
AUDIO
OUT
VIDEO
OUT
CB/PB
AUDIO
OUT
AUDIO OUT
VIDEO
OUT
CB/PB
DIGITAL
AUDIO OUT
HDMI OUT
DIGITAL AUDIO OUT
Connection
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at
your local store.
Setting
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
SETUP > QUICK >
DOLBY DIGITAL
BITSTREAM
Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital
decoder.
PCM
* To complete these settings, refer to pages 18-20.
Note:
• The audio source on a disc in a Dolby Digital multi channel
surround format cannot be recorded as digital sound by an MD
or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi channel surround sound
as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
EN
E6E76UD_DP170MW8B_EN_v1.indd 8
–8–
2009/10/27 21:28:54
Function Overview
Rear Terminals
1
2
L
3
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
VIDEO
OUT
CB/PB
6
DIGITAL
AUDIO OUT
S-VIDEO
OUT
HDMI OUT
5
4
1: AUDIO OUT jacks
Connect an RCA audio cable from here to the audio input jack of
your television or audio device.
2: COMPONENT VIDEO OUT jacks
Connect a component video cable from here to the component
video input jacks of your television.
3: S-VIDEO OUT jack
Connect an S-video cable from here to the S-video input jack of
your television.
4: HDMI OUT jack
Connect an HDMI cable from here to the HDMI compatible port
of a television or other display device.
5: DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable from here to the digital
audio input jack of your digital audio receiver.
6: VIDEO OUT jack
Connect an RCA video cable from here to the video input jack of
your television.
Note:
• Please purchase the necessary cables at your local store.
(Refer to pages 6-8.)
SETUP
AUDIO
OUT
Front Panel Indicator
POWER
PLAY
HDMI
1
2
3
1 POWER indicator
Lights up when power is on.
2 PLAY indicator
Lights up when inserted disc is being played back.
Blinks when an unplayable disc is inserted.
3 HDMI indicator
Lights up when there is video signal output from the HDMI OUT jack.
HDMI Setup
Setting
Video Output Signal
SETUP > QUICK>
HDMI MODE
480 Progressive
480p
720 Progressive
720p
1080 Interlaced
1080i
1080 Progressive
1080p
* To complete these settings, refer to pages 18-19.
Note:
• Video and audio signals may distorted temporarily when
changing to/from the HDMI output mode.
• Use a display with an HDMI-compatible port.
• You can check the HDMI connection status by pressing
[DISPLAY] during playback with the HDMI output mode (refer
to page 14).
• The HDMI mode that is not supported by display device is
grayed in the settings.
• If the TV is not compatible with newly selected HDMI output
mode, press and hold [PLAY B] on the front of the unit for
more than 5 seconds to reset the setting to default.
–9–
E6E76UD_DP170MW8B_EN_v1.indd 9
EN
2009/10/27 21:28:55
Remote Control
STANDBY-ON
2
1
1
2
3
4
5
6
7
8
9
0
+10
Disc
Button
(Alphabetical order))
OPEN/CLOSE
3
4
5
6
7
8
9
0
+10
CLEAR
OK
NEXT
PREV
PLAY
STOP
PAUSE
RETURN
TITLE
A-B
OK
DISC
REPEAT
SETUP
MENU
ANGLE
SETUP
A-B
ZOOM
REPEAT
REPEAT
AUDIO
SUBTITLE
ANGLE
MODE
DISPLAY
SEARCH
AUDIO
CLEAR
Installing the Batteries for
the Remote Control
• To select chapter or title directly.
• To select track or file directly.
• To move the cursor and determine
its position.
• To move the cursor and determine
its position.
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward
through a disc.
• To repeat between your chosen
point A and B.
• To repeat between your chosen
point A and B. (CD)
To rotate a picture of JPEG files.
• To select camera angles on a disc. • (JPEG)
To select “STEREO”, “L-ch” or
• To select audio languages on a disc. • “R-ch”.
(CD)
• To clear the markers.
• To clear the numbers entered
incorrectly.
y
• To cancel the point for A-B repeat.
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
y
• To cancel the point for A-B repeat.
(CD)
• To call up the menu on a disc.
• To call up the file list. (JPEG)
DISC
MENU
Install 2 AAA (1.5V) batteries matching the
polarity indicated inside battery compartment of the remote control.
1
2
3
DISPLAY
MODE
OPEN/CLOSE
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote control and the infrared
sensor window on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
STANDBY-ON
PREV
PLAY
NEXT
STOP
PLAY
NEXT
REPEAT
RETURN
OPEN/CLOSE
POWER
PLAY
HDMI
SEARCH
SETUP
STANDBY-ON
Note:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
EN
E6E76UD_DP170MW8B_EN_v1.indd 10
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order or
playy randomly.
y
• To set virtual surround on/off.
(CD)
• To activate the slide show mode.
(JPEG)
• To open or close the disc tray.
• To turn the unit on.
• To open or close the disc tray.
• To turn the unit on.
• To pause disc playback.
y
• To advance playback one frame at a • To pause disc playback.
time.
PAUSE
PREV
• To display the current disc or HDMI • To display the current disc or HDMI
mode.
mode.
• To begin disc playback.
• To turn the unit on.
• To begin disc playback.
• To turn the unit on.
• To skip chapters.
• To skip tracks or files.
• To play back a chapter or title
repeatedly.
• To play back a track or disc
repeatedly.
y (CD)
• To play back a file, folder or disc
repeatedly. (JPEG)
• To return to the previous operation • To return to the previous operation
in menu.
in menu.
•
To search track.
• To search chapter, title or time.
• To search time. (CD)
• To set or search the markers.
• To set or search the markers. (CD)
• To call up the setup menu.
• To call up the setup menu.
• To turn the unit on or to turn the
unit into the standbyy mode. (To
completely turn off the unit, you
must unplug the AC power cord.)
• To turn the unit on or to turn the
unit into the standbyy mode. (To
completely turn off the unit, you
must unplug the AC power cord.)
• To stop playback.
• To stop playback.
STOP
SUBTITLE
• To select subtitles on a disc.
TITLE
• To call up the top menu on a disc.
ZOOM
• To return to the top file of the
highest hierarchyy in the program
and file list. (JPEG)
To magnify part of a picture. (2x)
• To magnify part of a picture. (2x/4x) • (JPEG)
– 10 –
2009/10/27 21:28:56
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
y
Before:
Turn on the TV, amplifier and any other
components which are connected to this
unit. Make sure the TV and audio receiver
(not supplied) are set to the
correct channel.
STANDBY-ON
1
OPEN/CLOSE
1
2
3
4
5
6
8
7
0
3
4
Insert a disc with
label facing up.
OPEN/CLOSE
STANDBY-ON
3
2
To start playback
PLAY
4
PLAY
NEXT
STOP
OPEN/CLOSE
POWER
PLAY
HDMI
9
To stop playback
STOP
+10
NEXT
1
PLAY
STOP
3
4 1
2
PAUSE
Note:
• When you play back a CD-RW/-R with JPEG files, details on page 12.
” may appear at the top-right on the TV screen when the operation is prohibited by
•“
the disc or this unit.
• Some DVD may be played back from title 2 or 3 due to specific programs.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language for DVD function in “PLAYER MENU” menu. Refer to page 18.
• When the unit is connected with an HDMI cable, a revocation list update screen may appear when
you try to play back the DVD-video containing a revocation list.
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
Disc Menu
Paused and Step-by-Step
p y p Playback
y
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press [OK]
(or [PLAY B]).
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
Callingg Upp a Menu Screen duringg Playback
y
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
• Press [DISC MENU] to call up the disc menu.
• Press [TITLE] to call up the title menu.
DVD FUNCTIONS
)
on page 12
To open the disc
tray
PREV
CLEAR
PREV
1
STANDBY-ON
Note:
• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. Refer to pages 18-19.
Note:
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
To use [PREV H], [NEXT G] on this unit
Resume Playback
y
Press once to skip chapters, tracks or titles to a desired point.
Press [STOP C] during playback. Resume message will appear on
the TV screen.
Press [PLAY B], playback will resume
Resume ON
from the point at which playback was
Press 'PLAY' to play from here.
stopped.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For JPEG, playback will resume from the beginning of the track
at which playback was stopped.
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Fast Forward / Reverse Search
[g] or [h] repeatedly during playback to
E1
select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this unit will also
change forward or reverse playback speed.
To continue playback, press [PLAY B].
Note:
• For DVD, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).
• For audio CD, approximate speed is 1(2x), 2(8x), 3(30x).
Slow Forward / Reverse Search
Press [g] or [h] repeatedly in the pause mode to
1
select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this unit in the
pause mode will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Note:
• Slow forward or reverse speed is different depending on the
disc. Approximate speed is 1(1/16x), 2(1/8x), 3(1/2x).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. Refer to pages 18-19.
– 11 –
E6E76UD_DP170MW8B_EN_v1.indd 11
EN
2009/10/27 21:29:07
Kodak Picture CD
Zoom
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom factor:
2x, 4x or off.
x2
This unit can also run JPEG files stored on Kodak Picture CD. The
picture CD is a service to convert photographs taken by a
conventional film camera into digital data and write the data
on a CD. The user can enjoy picture images on the television set
by playing back the picture CD. For details of Kodak Picture CD,
contact a shop that deals with developing service of Kodak Inc.
x4
3) Press [K / L / s / B] to slide the zoomed picture across the TV
screen.
4) To exit zoom mode, press [ZOOM] to select off.
1
When selecting the file :
Note:
• Zoom function does not work while the disc menu is
displayed.
• 4x zoom is not available on some discs.
• Only 2x zoom is available on JPEG.
• You cannot slide the zoomed picture on some JPEG files.
DVD FUNCTIONS
When selecting the folder:
FILE LIST
DISC NAME
OK
PLAY
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
1/ 2
folder name 1
• Press [B] when you want to go to the next hierarchy.
• Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
2
Picture 5
Picture 6
Press [STOP C] once to stop
playback temporarily.
OK
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to next one
in turn.
• Press [STOP C] to stop playback.
• If all menu items cannot be displayed in the TV screen,
“G” appears at the right bottom of the screen,
indicating that the user can view remaining items on the
next page. “H” appears, it indicates that the user can
view other items on the previous page. The track number
of the currently highlighted item and the total tracks are
shown at the center bottom of the screen.
• If “G” is shown at the right bottom, use [NEXT G] to
view the next page. If “H” is shown at the left bottom,
use [PREV H] to view the previous page.
• It may take some time until all menu items are displayed
on the menu screen.
Insert a CD-RW/-R with JPEG files, the file list will automatically
appear on the TV screen. Press [DISC MENU] when you want to
call up the file list again while CD-RW/-R with JPEG files is already
inserted.
OK
Picture 4
PLAY
JPEG is a method of compressing files. You can copy JPEG files on
CD-RW/-R from the computer and play back the files on this unit.
or
Picture 3
Current track number /
the number of total tracks
To play back
or
PLAY
Picture 2
1/32
JPEG Playback
y
1
Picture 1
Note:
• A track is displayed for 5 seconds and then the next track is
displayed.
• Every press on [ANGLE] will turn the image clockwise by 90
degrees when an image is displayed.
STOP
Refer to “Resume
Playback” on page 11.
This unit recommends the files recorded under the following
circumstances:
Applicable JPEG file
Remarks
Normal playback
Upper limit: 6,300 x 5,100
Pixel lower limit: 32 x 32 pixel
File size: Max. 7 MB
• A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen.
Note:
• Depending on some sections, it may take a while to be
recognized.
• Press [TITLE] to return to the first item.
• Folders and JPEG files are displayed respectively as
and .
• A maximum of 255 folders or 999 files may be recognized on
one disc.
• Up to 8 hierarchies can be recognized in one folder. File in the
9th or deeper hierarchies cannot be played back.
EN
E6E76UD_DP170MW8B_EN_v1.indd 12
– 12 –
2009/10/27 21:29:11
Transition Mode
Adjustment
j
of Picture Size
You can switch to the transition mode for JPEG files during
playback.
Depending on the TV connected to this unit, the overall picture
cannot be displayed and the edge of the picture can be cut off. In
this case, you can adjust the size of the JPEG playback image on
screen.
1
During playback, press [MODE] repeatedly until “
appears.
CUT
PLAY
”
IN/OUT
1
MODE
2
PLAY
or
FADE IN/OUT
”
NORMAL
MODE
To switch “CUT IN/OUT” or “FADE IN/OUT”.
OK
2
To switch “NORMAL” or “SMALL”.
OK
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT:
The image appears gradually and then disappears.
3
During playback, press [MODE] repeatedly until “
appears.
or
SMALL
NORMAL:
To display the image at 100% of the picture size.
SMALL:
To display the image at 95% of the picture size.
Press [RETURN] to exit.
RETURN
3
Press [RETURN] to exit.
• The transition mode cannot be switched when it is stopped, or
from the file list screen or the picture CD menu screen.
• The default setting is “CUT IN/OUT”.
• The setting screen will not be displayed while in the stop mode
or from the file list.
• This feature may have no effect on some files (e.g. Files with
small picture size).
• The default setting is “NORMAL”.
– 13 –
E6E76UD_DP170MW8B_EN_v1.indd 13
DVD FUNCTIONS
RETURN
Note:
EN
2009/10/27 21:29:15
On-Screen Display
p y
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
appears only in a case
multi-angle is available on the
DVD.
current playback status
DISPLAY
1
current playback status
DISPLAY
1
11/16 0:00:00
0
-0
0:03:30
4/12 0:03:21 - 0:02:15
T
remaining
g time of the current track
elapsed
p
time of the current track
TR(Track):
current track number / total tracks
ALL:
current track number / total tracks
remaining time of the current
chapter
elapsed time of the current
chapter
CH(Chapter):
current chapter number /
total chapters
DISPLAY
2
4/12 0:13:45 - 0:45:40
T
current repeat setting, if active
T:
Track repeat
A: All Tracks repeat
A B: A-B repeat
DISPLAY
2
1/3
0:00:00 - 1:23:45
remaining time of the entire disc
elapsed time of the entire disc
remaining time of the current title
elapsed time of the current title
TT(Title):
current title number / total titles
DISPLAY
DVD FUNCTIONS
3
T
L1
DISPLAY
layer numbers, appears only
when playing back a 2-layered
disc.
L0:
Layer 0 is in playback
L1:
Layer 1 is in playback
current repeat setting, appears
only when the repeat setting is
active.
C: Chapter repeat
T:
Title repeat
A B: A-B repeat
bit rate: the amount of audio and
video data currently being read
3
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
current HDMI status
• image output / resolution of image
• sound output format
• maximum number of audio
channels
DISPLAY
4
Note:
• For audio CD, when you are playing back a disc in program or random
mode,
PROGRAM (or RANDOM) will be displayed instead of 2 .
DISPLAY
4
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
current HDMI status
• image output / resolution of image
• sound output format
• maximum number of audio
channels
current playback status
DISPLAY
1
TRACK 01
the name of the file currently in
playback will be displayed.
DISPLAY
DISPLAY
5
2
1/36
T
TR(Track):
current track number / total tracks
current repeat setting, if active
T:
Track repeat
G: Group (folder) repeat
A: Disc repeat
DISPLAY
3
PROGRAM
or
RANDOM
(Only when you are playing back a disc in program or random
mode.)
DISPLAY
4
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
current HDMI status
• image output / resolution of image
• sound output format
• maximum number of audio
channels
DISPLAY
5
EN
E6E76UD_DP170MW8B_EN_v1.indd 14
– 14 –
2009/10/27 21:29:19
Search Functions
Search function does not work during programmed or random playback.
Using Track Search
1
Using Time Search
Press [SEARCH].
1
Press [SEARCH] repeatedly until the time search display
appears.
/29
TOTAL
PLAY
1:29:00
SEARCH
SEARCH
Select track number by using [the Number buttons] within 30
seconds. 1 2 3
4
5
6
7
8
9
0
2
/29
4
5
6
7
8
9
0
+10
TOTAL
1:29:00
+10
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play back
single-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [3]). To play back a double-digit track, press the track number.
• For discs with more than 100 tracks, to play back a single or a
double-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [0], [3], and for track 26, press [0], [2], [6]). To play back a
triple-digit track, press the track number.
Note:
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the time search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
• For audio CD, time search is not available for programmed and
random playback.
Using [PREV
[
H], [NEXT G]
1
Select a desired disc time by using [the Number buttons]
within 30 seconds. 1 2 3
Marker Setting
Press [PREV H], [NEXT G] during playback.
PLAY
PREV
DVD FUNCTIONS
2
Current Track
(TR)
NEXT
PREV
TR 1 TR 2 TR 3 TR 4
NEXT
called back later.
To set a marker
1 Press [SEARCH] repeatedly until the marker display
Note:
• [+10] can also bring the track search display, except for the disc
with less than 10 tracks. For such a disc, track search can be done
by just pressing track number.
• For audio CD, JPEG track search is not available for programmed
and random playback.
appears.
PLAY
SEARCH
2
Using Title / Chapter Search
Select a marker.
or
1
3
Press [SEARCH] once for the chapter search.
Press [SEARCH] twice for the title search.
OK
PLAY
To return to the marker later
1 Press [SEARCH] repeatedly until the marker display
/12
SEARCH
2
appears.
Select title/chapter number by using [the Number
buttons] within 30 seconds.
1
2
SEARCH
3
4
5
6
7
8
9
0
+10
/12
Using [PREV
[
H], [NEXT G]
1
Press [OK].
2
Select the marker.
3
Press [OK] at the desired marker.
Press [PREV H], [NEXT G] during playback.
OK
Current Chapter
(CH)
PLAY
PREV
NEXT
PREV
To exit the marker screen
1 Press [RETURN].
CH 1 CH 2 CH 3 CH 4
NEXT
or
Current Title
(TT)
RETURN
Note:
TT 1 TT2 TT3 TT4
PREV
NEXT
(If the disc has no chapters)
Note:
• Depending on the disc being played back, this function can
also be performed by directly entering the desired chapter
number with [the Number buttons]. Refer to the manual
accompanying the disc.
• The marker display
p y will disappear in about 30 seconds when
there is no output.
• To clear a marker, select the marker to be cleared at step
p 2 in
the section “To set a marker” or “To return to the marker later”
and then press [CLEAR].
• Opening
p
g the disc tray or turning off the power will erase all
markers.
• Selecting
g “AC” at step
p 2 in the section “To set a marker” or
“To return to the marker later” will also erase all markers.
– 15 –
E6E76UD_DP170MW8B_EN_v1.indd 15
EN
2009/10/27 21:29:24
Repeat
p / Random / Programmed
g
Playback
y
Repeat Playback
1
Press [MODE] twice.
RANDOM
CD-DA
STOP
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
Repeat function is available only during playback.
MODE
PLAY
1
Press [REPEAT] during playback.
e.g.) CD
PLAY
REPEAT
e.g.) DVD
2
Press [PLAY B] to start random playback.
PLAY
Each time you press [REPEAT], repeat function changes as
example below.
DVD FUNCTIONS
OFF
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
TRACK
(current file repeat)
GROUP
(current folder repeat)
ALL
(entire disc repeat)
Note:
• To repeat the current track in the random mode, press [REPEAT]
repeatedly until “ TRACK” appears during playback.
• To repeat
p
the entire random selections, press [REPEAT] repeatedly
until “ ALL” appears during playback.
• During random playback, you cannot go back to the previous
track.
Programmed Playback
You may determine the order in which tracks will play back.
1
Press [MODE] once.
CD-DA
MODE
2
Using [K / L] to select desired
track. Press [OK].
CD-DA
OK
or
OK
TOTAL 1:03:30
1
5
10
11
12
17
22
3:30
5:10
4:20
3:00
3:20
4:10
2:50
2/3
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program, use
[PREV H], [NEXT G] to see all the tracks.
• While an JPEG folder is open:
–Press [B] when you want to go to the next hierarchy.
–Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
Repeat A-B Playback
Press [A-B REPEAT] at your desired starting point (A).
3
Press [PLAY B] to start programmed playback.
A-
PLAY
OK
e.g.) CD
• Repeat setting (except “ALL”) will be cleared when moving to
another title, chapter, track/file or folder.
• This function is not available with some discs or during repeat
A-B playback.
1
TOTAL 0:00:00
STOP
PLAY
A-B
REPEAT
2
Press [A-B REPEAT] at your desired ending point (B).
A-B
A-B
REPEAT
• Point B should be in the same title or track as point A.
Note:
• To exit the sequence, press [A-B REPEAT] so that “OFF”
appears.
• To cancel point A, press [CLEAR] at step 1.
• This function is not available in the other repeat modes.
Random Playback
Note:
• Press [CLEAR] at step 2 to erase the most recently entered
track.
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [OK] at step 2.
• While a program is being played back, [STOP C] works as
follows;
- Press [STOP C] and [PLAY B] next, so that the
programmed
p
g
p
playback
y
restarts. (CD p
playback
y
restarts
from the current p
point. JPEG p
playback restarts from the
beginning of the current file.)
- Press [STOP C] twice and [PLAY B] next, so that p
playback
y
restarts from the first track in the original
g
order. However,
yyour p
programmed
g
playback
p y
can be restarted when you
y
follow the above steps.
p (Your p
programs
g
are still stored until
either the disc tray is open or power is turned off.)
• To repeat
p
the current track in the p
program,
g
p
press [REPEAT]
repeatedly until “ TRACK’’ appears during playback.
• To repeat
p
the entire p
program,
g
p
press [REPEAT] repeatedly until
“ ALL’’ appears during playback.
This function shuffles the playing order of tracks instead of
playback in sequence.
EN
E6E76UD_DP170MW8B_EN_v1.indd 16
– 16 –
2009/10/27 21:29:29
Special
p
Settings
g
Subtitle Language
Camera Angles
This unit allows you to select a subtitle language (if available)
during DVD playback.
Press [SUBTITLE] during playback.
PLAY
1.ENG/6
SUBTITLE
1
Each time you press [SUBTITLE], subtitle language
changes as example below.
OFF
(no subtitles)
ENG
(English subtitles)
FRE
(French subtitles)
Press [ANGLE] during playback.
ANGLE
Each time you press [ANGLE] or [s / B], camera angle
changes.
Black Level Setting
...
Adjust the black level to make the dark areas of the
TV picture brighter.
To cancel subtitle
1 Press [SUBTITLE] during playback.
1
Press [MODE] during playback.
ON
PLAY
1.ENG/6
MODE
PLAY
2
SUBTITLE
2
Press [s / B] to set subtitle to “OFF”.
Press [OK] to adjust
the black level.
OFF
OK
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
OFF
or
3
Note:
• If your language is not shown after pressing [SUBTITLE] several times,
the disc may not have that language. However, some discs have the
subtitle language setting on the disc menu. (Operation varies depending
on the discs, so refer to the manual along with the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle
is recorded on the scene.
• If you choose a language that has a 3-letter language code, the code will
be displayed every time you change the subtitle language setting. If you
choose any other languages, ‘---’ will be displayed instead. Refer to page 24.
• Some discs will only allow you to change the subtitle from the disc
menu. Refer to the manual accompanying the discs for details.
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
RETURN
Press [RETURN] to exit.
Stereo Sound Mode
This unit allows you to select a sound mode during
CD playback.
1
Press [AUDIO] during CD playback.
PLAY
STEREO
AUDIO
Each time you press [AUDIO], sound mode changes as example below.
Audio Language
1
1/8
PLAY
DVD FUNCTIONS
1
Some DVD may contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle if
appears on the TV screen.
If the “ANGLE ICON” is set to “OFF” in “OTHERS”
menu,
will not appear. Refer to pages 18-22.
STEREO
(right and left channels are active)
L-ch
(left channel is active)
R-ch
(right channel is active)
Virtual Surround
Press [AUDIO] to change audio language.
1.ENG Dolby D 3/2.1ch 48k/3
PLAY
AUDIO
Each time you press [AUDIO], the audio language changes
as example below.
ENG
(English audio)
SPA
1
Note:
(Spanish audio)
OFF
MODE
2
(French audio)
Press [OK] for the desired effect.
1
OK
1: natural effect
2: emphasized effect
OFF: no effects (original sound)
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language. However, some discs
allow audio language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along with the disc.)
• When “OFF” appears on the TV screen, it means audio language is
not available.
• Some discs will only allow you to change the audio setting from the
disc menu. Refer to the manual accompanying the discs for details.
3
Press [RETURN] to exit.
RETURN
Note:
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”. Refer to
“Stereo Sound Mode”.
• For DVD, when playing
y
back 96kHz with virtual surround
function, the sound will be down sampled to 48kHz.
– 17 –
E6E76UD_DP170MW8B_EN_v1.indd 17
Press [MODE] twice (once for CD) during playback.
PLAY
...
FRE
channel stereo system.
EN
2009/10/27 21:29:34
DVD Settingg
QUICK Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”, “HDMI MODE” or “DOLBY DIGITAL” from “QUICK” menu quickly.
1 Press [SETUP] in the stop mode.
STOP
2 Select the desired item.
SETUP
or
SETUP menu
Confirm that “QUICK” is selected.
OK
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
page 18 A Step 5
page 19 B Step 5
page 20 C Step 5
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
OK
OK
OK
• Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE”, “HDMI MODE” or “DOLBY DIGITAL” section on pages 18-20.
CUSTOM Menu
You can change the settings of the unit.
• QUICK on pages 18-20 indicates DVD setting menus also accessible from “QUICK” menu.
DVD FUNCTIONS
1
2 Select “CUSTOM”.
Press [SETUP] in the stop mode.
STOP
3 Select the desired item.
SETUP
OK
SETUP menu
OK
LANGUAGE
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
QUICK SETUP
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
OK
ORIGINAL
OFF
ENGLISH
ENGLISH
OK
OK
LANGUAGE menu
DISPLAY menu
AUDIO menu
ORIGINAL
OFF
ENGLISH
ENGLISH
OK
OK
page 18
A
PARENTAL menu
OTHERS menu
AUDIO
DISPLAY
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
A
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE
OFF
HDMI MODE
480㨜
241)4'55+8'/1&'#761
FORMAT
RGB
RGB RANGE
NORMAL
pages 19-20
OTHERS
DRC
DOWN SAMPLING
DOLBY DIGITAL
HDMI AUDIO
ANGLE ICON
ON
AUTO POWER OFF ON
SLIDE SHOW
5sec
OK
OK
page 20
B
PASSWORD
Enter current password.
ON
ON
BITSTREAM
ON
C
OK
page 21
page 22
D
E
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section above.
4 Select the desired item.
5 Select the desired language.
6 To exit the menu
OK
or
OK
LANGUAGE menu
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
OK
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE”, “HDMI MODE” or
“DOLBY DIGITAL” are available.
“QUICK “ menu consists of the
setting menu frequently used,
and they are accompanied with
QUICK . You can make all settings
in “CUSTOM” menu.
EN
E6E76UD_DP170MW8B_EN_v1.indd 18
SETUP
or
AUDIO: *1 *2
(Default: ORIGINAL)
Sets the audio
language.
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle
language.
DISC MENU: *1
(Default: ENGLISH)
Sets the language for
DVD menu.
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for
the on-screen display.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
Note:
*1
• Language options are not available
with some discs.
• If “OTHER” is selected on “AUDIO”,
“SUBTITLE” or “DISC MENU” screen,
press 4-digit number to enter the code
for the desired language. Refer to the
“Language Code List” on page 24.
• Only the languages supported by the
disc can be selected.
*2
• “LANGUAGE” setting for “AUDIO”
and “SUBTITLE” are not available with
some discs. Then use [AUDIO] and
[SUBTITLE]. Refer to page 17.
– 18 –
2009/10/27 21:29:40
DISPLAY Setting
DISPLAY menu
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
OFF
480p
AUTO 1
RGB
NORMAL
or
OK
OK
4:3 LETTER BOX
AUTO
OFF
480p
AUTO1
RGB
NORMAL
STILL MODE: (Default: AUTO)
See note on the right.
STILL MODE
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
NORMAL
page 20
AUTO
FIELD
FRAME
Select the
desired
setting.
OK
or
OK
QUICK
(Default: 480p)
See note on the right.
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
HDMI MODE
480p
780p
1080i
1080p
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
NORMAL
Select the
desired
setting.
OK
or
OK
PROGRESSIVE MODE: (Default: AUTO1)
See note on the right.
Select the
PROGRESSIVE MODE
desired
TV ASPECT
4:3 LETTERBOX
AUTO1
setting.
AUTO
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
AUTO2
VIDEO
OFF
480p
AUTO 1
RGB
NORMAL
or
OK
OK
FORMAT: (Default: RGB)
See note on the right.
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
YCbCr
NORMAL
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
NORMAL
OK
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
RGB
ENHANCED
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
NORMAL
OK
– 19 –
E6E76UD_DP170MW8B_EN_v1.indd 19
SETUP
Note:
• Select “4:3 LETTER BOX”, so that
black bars mayy appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a widescreen TV is connected to this
unit.
• Select “16:9 SQUEEZE” when the
TV screen is too large horizontallyy
at “16:9 WIDE” setting and when
it is possible to adjust the screen
size using the TV’s controls.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it automatically selects the best resolution
setting (“FRAME” or “FIELD”)
based on the data characteristics of the pictures. (default)
• If you select “FIELD”, the picture
in the still mode will be stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
• Some pictures may be blurred
at the “AUTO” setting in the still
mode due to their data characteristics.
HDMI MODE:
• 480p: Video output from the
HDMI OUT jack at 480p
• 720p: Video output from the
HDMI OUT jack at 720p
• 1080i: Video output from the
HDMI OUT jack at 1080i
• 1080p: Video output from the
HDMI OUT jack at 1080p
• When the HDMI/DVI video can
be output, the setting change
can be done.
• If the TV is not compatible with
newly selected HDMI output
mode, press and hold [PLAY B]
on the front of the unit for more
than 5 seconds to reset the
setting to default.
PROGRESSIVE MODE:
RGB RANGE: (Default: NORMAL)
See note on the right.
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
To exit the menu
TV ASPECT:
16:9 WIDE
16:9 SQUEEZE
DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
RGB RANGE
6
DVD FUNCTIONS
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Select the desired item. 5 TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
or
Select the
TV ASPECT
desired
4:3 LETTERBOX
TV ASPECT
OK
4:3 LETTER BOX
STILL MODE
AUTO
setting.
4:3 PAN & SCAN
• You can select a mode below
for the progressive scan output.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on the
material of 30-frame
film.
• VIDEO: mode for video
material.
FORMAT:
• Select an HDMI output mode
between “YCbCr” and “RGB”.
• When the connected device
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only
when you use the HDMI connection.
RGB RANGE:
• Select a HDMI picture mode
between “NORMAL” and
“ENHANCED”.
• Select “ENHANCED” if the blackwhite contrast is not clear.
• This setting is effective only for
HDMI RGB output.
EN
2009/10/27 21:29:46
Follow steps 1 to 3 in the “CUSTOM menu” section on page 18 and step 4 on page 19.
5
Select “YES”.
Before proceeding…
4:3 LETTERBOX
AUTO
ON
480p
AUTO 1
RGB
NORMAL
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE OFF
HDMI MODE
480p
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
OK
6
To complete the
“PROGRESSIVE”
setting
1. Make sure your TV has progressive scan.
2. Connect with component video cable
SETUP
NOTE: If there is no picture or picture is
distorted after selecting “YES”,
wait about 15 seconds for auto recovery.
A cti vate P rogressi ve?
SELECT: K / L
If there is no picture or you
do not press anyy buttons
for 15 seconds, Progressive
Scan will switch to “OFF”.
or
NO
YES
SET:OK
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” either in “DISPLAY”
menu or by pressing and
holding [PLAY B] on the
front of the unit for more
than 5 seconds.
• When “PROGRESSIVE” is
“ON”, video signals from
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not
be output at all.
Select “YES”.
OK
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
OK
NO
YES
SELECT: K / L
C
Note:
If “PROGRESSIVE” is “ON”,
this message appears:
PROGRESSIVE: QUICK
(Default: OFF)
See note on the right.
SET:OK
AUDIO Setting
Choose the appropriate audio setting for your device. It only affects during the playback of DVD. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 18.
DVD FUNCTIONS
4 Select the desired item.
5
DRC (Dynamic
y
Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud
sounds.
DRC
DOWN SAMPLING
DOLBY DIGITAL
HDMI AUDIO
ON
ON
BITSTREAM
ON
OK
OFF
ON
BITSTREAM
ON
AUDIO menu
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
HDMI AUDIO
ON
OK
DRC
DOWN SAMPLING
DOLBY DIGITAL
HDMI AUDIO
ON
ON
BITSTREAM
ON
ON
OFF
BITSTREAM
ON
OK
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” “HDMI
MODE” or “DOLBY DIGITAL”
are available. “QUICK” menu
consists of the setting menu
frequently used, and they
are accompanied with QUICK
. You can make all settings in
“CUSTOM” menu.
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital
decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING
DOLBY DIGITAL
HDMI AUDIO
ON
ON
BITSTREAM
ON
ON
ON
PCM
ON
OK
HDMI AUDIO:
(Default: ON)
This function is only available when you use an HDMI
connection.
• ON: to output the HDMI sound.
• OFF: not to output the HDMI sound.
DRC
DOWN SAMPLING
DOLBY DIGITAL
HDMI AUDIO
ON
ON
BITSTREAM
ON
6 To exit the menu
SETUP
Note:
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back a
96kHz disc with the
copyright protection, or
when virtual surround is
set to “1” or “2”, the sound
will be down sampled at
48kHz even if the “DOWN
SAMPLING” is set to “OFF”.
• When the HDMI sound
can be output, the setting
change cannot be done.
• This function is available
only on digital
outputting of a disc
recorded in 96kHz.
HDMI AUDIO:
• When the HDMI sound
cannot be output the
setting change cannot be
done.
ON
ON
BITSTREAM
OFF
OK
EN
E6E76UD_DP170MW8B_EN_v1.indd 20
– 20 –
2009/10/27 21:29:48
D
PARENTAL Setting
This function prevents unit from playing material inappropriate for children.
Parental Levels
Parental level allows you to set the rating levels of your DVD software. Playback will stop if the ratings exceed the levels you set. Follow
steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Enter your desired 4-digit
5 Select “PARENTAL
password (expect for 4737).
6 Select the desired
LEVEL”.
7 To exit the menu
level.
SETUP
2
or
3
4
5
6
7
8
9
0
+10
OK
PARENTAL LEVEL
PASSWORD CHANGE
or
ALL
OK
PARENTAL menu
PASSWORD
OK
or
If you have set a password
already, enter the current 4-digit
password.
PARENTAL menu
OK
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
OK
CONTROL LEVELS
• ALL:
all parental locks are canceled.
• Level 8:
DVD software of any grades (adult/general/children) can be played
back.
• Levels 7 to 2: onlyy DVD software intended for general use and children can be played
back.
• Level 1:
onlyy DVD software intended for children can be p
played
y back, with
those intended for adult and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
DVD software of any grades (adult/general/children) can be played
back.
• 7 [NC-17]:
no one under 17 admitted
• 6 [R]:
restricted; under 17 requires accompanying parent or adult guardian
• 5 [PGR]:
parental guidance recommended
• 4 [PG13]:
unsuitable for children under 13
• 3 [PG]:
parental guidance suggested
• 2 [G]:
general audience
• 1 [KID SAFE]: suitable for children
DVD FUNCTIONS
1
Note:
• Some DVD-video may not respond to “PARENTAL“ setting. Make sure this function
works with your DVD-video.
• The resume information will be cleared if you change the parental level when the
resume information is on.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Enter current 4-digit
password.
1
2
5 Select “PASSWORD
6 Enter your new 4-digit
CHANGE”.
3
or
1
2
5
6
7
8
9
4
5
6
+10
7
8
9
0
+10
OK
PARENTAL LEVEL
PASSWORD CHANGE
ALL
PARENTAL menu
PASSWORD
OK
OK
– 21 –
E6E76UD_DP170MW8B_EN_v1.indd 21
SETUP
3
4
0
7 To exit the menu
password (except for
4737).
OK
Note:
• Record the password
in case you forget it.
• If you forget the
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password. Password
will be cleared and
parental levels will be
set to “ALL”.
EN
2009/10/27 21:29:51
E
OTHERS Setting
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Select the desired item.
or
OTHERS menu
5
6 To exit the menu
ANGLE ICON: (Default: ON)
Set to “ON” to display
when multiple camera
angles are available during DVD playback.
SETUP
OFF
ON
ANGLE ICON
ON
AUTO POWER OFF ON
OK
OTHERS
ANGLE ICON
ON
AUTO POWER OFF ON
SLIDE SHOW
5sec
OK
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off automatically after 30
minutes of no use.
ANGLE ICON
ON
AUTO POWER OFF ON
ON
OFF
OK
DVD FUNCTIONS
SLIDE SHOW: (Default: 5sec)
Set the display time of each JPEG file for slide show
mode.
Select the
desired
SLIDE SHOW
ANGLE ICON
ON
AUTO POWER OFF ON
5sec
setting.
SLIDE SHOW
5sec
10sec
or
OK
OK
EN
E6E76UD_DP170MW8B_EN_v1.indd 22
– 22 –
2009/10/27 21:29:53
Reset to the Default Setting (Except for PARENTAL Setting)
1 Press [SETUP] in the
stop mode.
STOP
2 Select “INITIALIZE”.
3 Select “YES”.
4 To exit the menu
SETUP
SETUP
or
OK
OK
SETUP menu
Press
twice.
QUICK SETUP
INITIALIZE
QUICK SETUP
Initialize?
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
OK
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
NO
YES
OK
Note:
• When you do not wish
to initialize, select
“NO” at step 3.
OK
INFORMATION
Troubleshootingg Guide
If this unit does not perform properly when operated as instructed in this manual. Refer to the following:
Corrective action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to • Check if the power plug is connected to an AC outlet.
the remote control.
• Check the batteries in the remote control.
• Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles
between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then
if you hear some signal sound from the radio in response to your pressing buttons on the remote
control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working
if you confirm infrared light through the digital camera.
Poor picture or noise.
• Interference signal may be received. Change the position and direction of the unit.
No picture.
• Connect the video cable firmly.
• Insert a correct video disc that can be played back on this unit.
• Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. Refer to pages 6-7.
No sound/image from HDMI • Check the HDMI connection. (Check the status of the HDMI related indications.)
connection.
• Check whether the connected monitor device or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of
other connected device.
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction. Refer to page 11.
• Check if “PROGRESSIVE” is set correctly according to your TV. Refer to pages 18-20.
Disc cannot be played back. • Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cables firmly.
• Turn on the power of the audio component.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output.
• This unit does not support DTS audio.
-This is not a malfunction.
Audio or subtitle language
• The selected language is not available for audio or subtitles on the DVD.
does not match the setting.
-This is not a malfunction.
The camera angle cannot be • The DVD does not contain sequences recorded from different camera angles.
changed.
-This is not a malfunction.
Audio or subtitle language
• The DVD does not contain audio source or subtitles in the selected language.
cannot be changed.
-This is not a malfunction.
“ ” appears on the TV screen, • That operation is prohibited by this unit or the disc.
prohibiting an operation.
-This is not a malfunction.
INFORMATION
Problem
No power.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on
correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
– 23 –
E6E76UD_DP170MW8B_EN_v1.indd 23
EN
2009/10/27 21:29:55
Specifications
p
Output signal format :
Operating temperature :
NTSC color
41°F (5°C) to 104°F (40°C)
Power source :
Dimensions :
120 V AC +/- 10%, 60 Hz +/- 0.5%
W : 17.2”
H : 2.1”
D : 8.4”
Power consumption :
10W (standby : 0.8W)
(435mm)
(51mm)
(211mm)
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Weight :
Approx 3.8lbs (1.7kg)
Language
g g Code List
Language
g g
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
C-E
INFORMATION
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
F-H
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Language
g g
Code
Language
g g
Code
Language
g g
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If yyou choose a language
g g that has a 3-letter language
g g code, the code will be displayed
p y everyy time yyou change
g the audio or subtitle
language
g g setting on page 17. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in
bracket.))
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect
in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase. Certain
parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt
or other proof of original retail purchase will be required together with the product
to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unauthorized
service center. This limited warranty does not apply to any product not purchased
and used in the United States.
This product is produced for home use and this warranty only covers failures due
to defects in material or workmanship which occurs during normal use. It does not
cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or product not supplied by FUNAI CORP., or damage which results from
accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES
(EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS,
DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE
LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING
OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,
EN
E6E76UD_DP170MW8B_EN_v1.indd 24
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY,
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI
AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS
AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS
WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE
CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE
OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING
THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not
reimburse you for any service done by unauthorized service providers without
prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service
inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Tel :1-800-605-8610
www.magnavox.com/support
2200 Spiegel Drive, Groveport, OH 43125
– 24 –
2009/10/27 21:29:57
INFORMATION
MEMO
– 25 –
E6E76UD_DP170MW8B_EN_v1.indd 25
EN
2009/10/27 21:29:58
INFORMATION
corte aquí
MEMO
EN
E6E76UD_DP170MW8B_EN_v1.indd 26
– 26 –
2009/10/27 21:29:58
Español
1
4
Conexiones
Si su televisor tiene entradas de audio/
video vea la sección “Connection to
a TV” en la página 6 en el manual de
manejo. En caso contrario, vea la sección
“Connecting to RF Modulator (Not
Supplied)” en la página del frente en el
manual de manejo.
2
Instalación de las pilas
en el control remoto
1
3
1
3
2
Reproducción
Antes:
Encienda el televisor,
amplificador y
otros equipos
que puedan estar
conectados a esta
unidad. Asegúrese
que el televisor y el
sintoamplificador de
audio (no provisto)
están en el canal
correcto.
STANDBY-ON
1
2
4
5
6
7
8
9
0
+10
Confirme que ha
seleccionado “QUICK”.
OK
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
A-B
OK
REPEAT
co te aquí
corte
aqu
ANGLE
AUDIO
OK
2
4
5
6
7
8
9
3
2
Ponga un disco con la
etiqueta hacia arriba.
4
Para parar la
reproducción
OPEN/CLOSE
STANDBY-ON
CLEAR
0
3
4
+10
NEXT
PREV
PLAY
STOP
PAUSE
RETURN
TITLE
3
Para empezar la
reproducción
PLAY
STOP
• Para seleccionar directamente el capítulo o título.
• Para seleccionar directamente la canción.
• Para mover el cursor y determinar la posición.
• Para mover el cursor y determinar la posición.
• Para buscar en avance/retroceso por un disco.
• Para empezar la reproducción en avance lento/ret- • Para buscar en avance/retroceso por un disco.
roceso durante el modo de pausa.
QUICK SETUP
SETUP
1
Para abrir la
bandeja del
disco
1
3
STOP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
1
OPEN/CLOSE
Soporte
Botón
(Orden alfavético)
Para cambiar el idioma
en la pantalla
STANDBY-ON
CLEAR
2 Confirme que ha seleccionado
“PLAYER MENU”.
• Para repetir entre su punto A y B seleccionado.
• Para repetir entre su punto A y B seleccionado. (CD)
• Para seleccionar los ángulos de cámara en un disco. • Para girar la imagen. (JPEG).
• Para seleccionar idiomas de audio en un disco.
• Para seleccionar “ESTÉREO”, “L-ch” o “R-ch”.
(CD)
• Para borrar los marcadores.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.
• Para borrar los marcadores. (CD)
• Para eliminar el Nº de estado en la entrada de programa.
g
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.(CD)
• Para llamar el menú en un disco.
• Para llamar la lista de archivo. (JPEG)
• Para indicar el modo de disco actual o modo de
HDMI.
• Para indicar el modo de disco actual o modo de
HDMI.
• Para activar/desactivar el nivel del negro.
g
• Para activar/desactivar el ambiental virtual.
• Para disponer el orden de reproducción o la reproducción aleatoria.
• Para activar/desactivar el ambiental virtual. (CD)
• Para activar el modo carrusel de diapositivas.
p
((JPEG))
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un cuadro cada vez.
• Para hacer una pausa en la reproducción.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para saltar capítulos.
• Para saltar canciones.
DISC
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
DISPLAY
OK
MODE
OPEN/CLOSE
OK
3 Seleccione el idioma deseado para
PAUSE
las indicaciones en la pantalla.
or
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
PLAY
NEXT
PREV
REPEAT
Español
MENU
• Para reproducir repetidamente una canción o
disco.(CD)
• Para reproducir repetidamente un capítulo o título. • Para
reproducir repetidamente una canción, grupo
o disco. (JPEG)
RETURN
• Para volver a la operación anterior en el menú.
• Para volver a la operación anterior en el menú.
• Para buscar un capítulo, título o tiempo.
• Para colocar o buscar los marcadores.
• Para buscar una canción.
• Para buscar el tiempo.(CD)
• Para colocar o buscar los marcadores. (CD)
• Para llamar el menú de ajustes de DVD.
• Para llamar el menú de ajustes de DVD.
• Para encender o para pasar la unidad al modo de
espera.
p
(Para apagar
p g completamente
p
la unidad,
debe desconectar el cable de alimentacion de CA.)
• Para encender o para pasar la unidad al modo de
espera.
p
(Para apagar
p g completamente
p
la unidad,
debe desconectar el cable de alimentacion de CA.)
• Para parar la reproducción.
• Para parar la reproducción.
OK
SEARCH
4 Para salir del menú.
SETUP
SETUP
STANDBY-ON
STOP
SUBTITLE
• Para seleccionar subtítulos en un disco.
TITLE
ZOOM
• Para llamar el menú inicial en un disco.
• Para volver al archivo superior
p
de la jjerarquía más
alta en el programa y en la lista de archivo. (JPEG)
• Para ampliar parte de la imagen. (2x/4x)
• Para ampliar parte de la imagen. (2x) (JPEG)
– 27 –
E6E76UD_DP170MW8B_EN_v1.indd 27
ES
2009/10/27 21:29:58
Quick Use Guide
1
4
Connections
If your TV has audio/video input jacks,
see the section “Connection to a TV” on
page 6 of the owner’s manual. If not, see
the section “Connecting to RF Modulator
(Not Supplied)” on the front page of the
owner’s manual.
2
Installing the Batteries
for the Remote Control
1
Playback
Before:
Turn on the TV,
amplifier and any
other device which
are connected to
this unit. Make
sure the TV and
audio receiver (not
supplied) are set to
the correct channel.
STANDBY-ON
1
1
OPEN/CLOSE
2
1
To open the disc
tray
2
Insert a disc with label
facing up.
4
To stop playback
3
4
5
6
7
8
9
OPEN/CLOSE
STANDBY-ON
CLEAR
0
3
4
+10
NEXT
PREV
PLAY
STOP
PAUSE
RETURN
TITLE
3
To start playback
PLAY
STOP
3
2
Disc
Button
(Alphabetical order))
1
To Change the
On-Screen Language
STANDBY-ON
1
2
4
5
6
7
8
9
0
+10
Confirm that “QUICK” is
selected.
STOP
3
OK
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
OK
A-B
REPEAT
SETUP
ANGLE
AUDIO
OK
CLEAR
2 Confirm that “PLAYER MENU” is
• To select chapter or title directly.
• To select track of file directly.
• To move the cursor and determine its position.
• To move the cursor and determine its position.
• To search forward/backward through a disc.
• To begin slow forward/reverse playback in the
pause mode.
• To search forward/backward through a disc.
• To repeat between your chosen point A and B.
• To repeat between your chosen point A and B. (CD)
• To select camera angles on a disc.
• To rotate a picture of JPEG files. (JPEG)
• To select audio languages on a disc.
• To select “STEREO”, “L-ch” or “R-ch”. (CD)
• To clear the markers.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
• To clear the markers. (CD)
• To remove status number in program input.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat. (CD)
• To call up the menu on a disc.
• To call up the file list. (JPEG)
DISC
selected.
cut here
3
MENU
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
DISPLAY
ENGLISH
4:3 LETTER BOX
OFF
480p
BITSTREAM
MODE
OK
OPEN/CLOSE
OK
PAUSE
3 Select the desired language for the
on-screen display.
or
PLAY
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
NEXT
PREV
REPEAT
• To display the current disc or HDMI mode.
• To display the current disc or HDMI mode.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order or play randomly.
• To set virtual surround on/off. (CD)
• To activate the slide show mode. (JPEG)
• To open or close the disc tray.
• To turn the unit on.
• To open or close the disc tray.
• To turn the unit on.
• To pause disc playback.
• To advance playback one frame at a time.
• To pause disc playback.
• To begin disc playback.
• To turn the unit on.
• To begin disc playback.
• To turn the unit on.
• To skip chapters.
• To skip tracks or files.
• To play back a chapter or title repeatedly.
• To play back a track or disc repeatedly. (CD)
• To play back a file, folder or disc repeatedly. (JPEG)
• To return to the previous operation in menu.
• To return to the previous operation in menu.
• To search chapter, title or time.
• To set or search the markers.
• To search track.
• To search time. (CD)
• To set or search the markers. (CD)
• To call up the setup menu.
• To call up the setup menu.
RETURN
OK
4 To exit the menu.
SEARCH
SETUP
SETUP
STANDBY-ON
• To turn the unit on or to turn the unit into the
• To turn the unit on or to turn the unit into the
standby mode. (To completely turn off the unit, you standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
must unplug the AC power cord.)
STOP
• To stop playback.
SUBTITLE
• To select subtitles on a disc.
TITLE
E6E76UD
1VMN28597 ★★★★★
ZOOM
• To stop playback.
• To call up the top menu on a disc.
• To return to the top file of the highest hierarchy in
the program and file list. (JPEG)
• To magnify part of a picture. (2x/4x)
• To magnify part of a picture. (2x) (JPEG)
Printed in China
* 1 V M N 2 8 5 9 7 *
E6E76UD_DP170MW8B_EN_v1.indd 28
2009/10/27 21:30:00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement