Sharp LC-32HT3U Operating instructions

Sharp LC-32HT3U Operating instructions
ENGLISH
FRANÇAIS
LC-32HT3U
LC-37HT3U
LC-42HT3U
ESPAÑOL
Remote Replicator
Duplicateur distant
Duplicador remoto
AN-H06RCU
Remote control unit
Télécommande
Unidad de control remoto
AN-32HTRC
OPERATION MANUAL FOR HOTEL OPERATOR
MODE D'EMPLOI POUR HOTELIER
MANUAL DE OPERACIÓN PARA EMPRESAS HOTELERAS
LC-32HT3U
LC-37HT3U
AN-32HTRC
AN-H06RCU
LC-42HT3U
ENGLISH
Remote Replicator
(AN-H06RCU)
Remote control unit
(AN-32HTRC)
ENGLISH
OPERATION MANUAL FOR HOTEL OPERATOR
• This operation manual is for LODGENET, ONCOMMAND,
NXTV, nSTREAMS and SeaChange users.
• This operation manual explains how to set or adjust the TV
settings with the Remote Replicator (AN-H06RCU) and the
remote control unit (AN-32HTRC), the optional accessories of
the LCD TV (LC-32HT3U/LC-37HT3U/LC-42HT3U) designed
for hotel guest rooms.
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly from
the actual operations.
• Menu items that are not selectable are grayed out.
• The examples used throughout this manual are based on the
LC-37HT3U model.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
1
IMPORTANT INFORMATION
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32HT3U/LC-37HT3U/LC-42HT3U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling
organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP (For U.S.A. Only)
Trademarks
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
2
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
3
Contents
IMPORTANT INFORMATION ..................................1
Trademarks ..............................................................2
IMPORTANT SAFETY INSTRUCTIONS ..................3
Contents ..................................................................4
General notes...........................................................6
Accessories ........................................................6
TV modes index ..................................................6
Explanation of the remote control unit, TV modes
and the buttons on the TV .................................6
Quick TV cloning guide (for the PPV TV)...............7
Quick TV cloning guide (for the Normal TV) ..........8
Quick setup for LODGENET users .........................9
PPV System ........................................................9
Function Menu Setup ..........................................9
Default Channel .................................................10
Default Volume ..................................................10
Room Mode ......................................................11
CH Re-Map .......................................................11
View Mode ........................................................12
Quick setup for ONCOMMAND users .................13
PPV System ......................................................13
Default Channel .................................................13
Default Volume ..................................................14
Room Mode ......................................................14
Label Input.........................................................15
CH Re-Map .......................................................15
View Mode ........................................................16
Quick setup for NXTV users .................................17
PPV System ......................................................17
Default Channel .................................................17
Default Volume ..................................................18
Room Mode ......................................................18
CH Re-Map .......................................................19
View Mode ........................................................19
Quick setup for nSTREAMS users .......................20
PPV System ......................................................20
Function Menu Setup ........................................20
Default Channel .................................................20
Default Volume ..................................................21
Room Mode ......................................................21
CH Re-Map .......................................................22
View Mode ........................................................22
Quick setup for SeaChange users .......................23
PPV System ......................................................23
Default Channel .................................................23
Default Volume ..................................................24
Room Mode ......................................................24
CH Re-Map .......................................................25
View Mode ........................................................25
4
Remote Replicator ................................................26
Part names ........................................................26
Inserting the battery ...........................................26
Storing the settings from the TV .........................27
Transferring the settings to the TV .....................27
Storing the settings from the TV (for NXTV users
only) ................................................................27
Transferring the settings to the TV (for NXTV users
only) ................................................................27
Configuration memory banks .............................27
DIAGNOSTICS mode (PPV TV only) ...................27
Other settings for the PPV TV mode ....................29
PPV TV menu ....................................................29
TV Mode .......................................................29
Reset ............................................................29
Function menu (for LODGENET and nSTREAMS
users only) .......................................................30
Option menu (for LODGENET and nSTREAMS
users only) .......................................................30
Remote control unit .............................................31
Part names ........................................................31
Inserting the batteries ........................................32
Using the remote control unit .............................32
Cautions regarding the remote control unit ....32
Preparation ............................................................33
Connecting a Blu-ray disc player, HD-DVD
player, DVD player or a Digital TV STB (Air or
Cable)..............................................................33
Connecting a VCR, game console
or camcorder...................................................33
Using Digital Audio Output .................................33
Connecting HDMI equipment .............................34
Connecting a PC ...............................................34
PC compatibility chart ........................................34
Watching TV ...........................................................35
Turning on the power.........................................35
Turning off the power .........................................35
Initial setup ........................................................36
Simple button operations for changing channels ...37
Simple button operations for changing volume/
sound ..............................................................38
Setting MTS/SAP stereo mode ..........................39
Setting Digital broadcasting audio mode ............39
Contents
Basic adjustment settings ....................................40
Menu operation buttons.....................................40
On-Screen Display .............................................40
PPV TV mode menu items
(for TV/INPUT 1/INPUT 2/INPUT 3) ..................41
PPV TV mode menu items (for HDMI/PC-IN) ......42
NORMAL TV mode menu items .........................43
EZ Setup ...........................................................44
Channel Setup ...................................................44
Antenna Setup - DIGITAL ..................................45
Favorite channel setting .....................................46
Picture adjustments ...........................................47
OPC setting ..................................................47
Advanced picture adjustments ......................48
Color Temperature ........................................48
Black.............................................................48
I/P Setting .....................................................48
Film Mode (3:2 pull-down) .............................48
3D-Y/C .........................................................48
Monochrome ................................................48
Range of OPC ...............................................48
Sound adjustment .............................................49
Surround ...........................................................49
Power Control ...................................................50
Digital Setup ......................................................50
Audio Setup ..................................................50
Using external equipment.....................................51
Displaying an external equipment image ............51
Input Select .......................................................51
Displaying an image from HDMI equipment........52
Input Skip ..........................................................52
Useful adjustment settings...................................53
Auto Sync. adjustment (for Analog PC input mode
only) ................................................................53
Fine Sync. adjustment .......................................53
Language setting ...............................................54
Image position ...................................................54
Reset .................................................................54
Input Label.........................................................55
Sleep Timer .......................................................55
View Mode for 4:3 Programs .............................56
View Mode for HD Programs .............................56
View Mode (for PC input mode) .........................57
Advanced Option setting ...................................58
Audio Only ....................................................58
Digital Noise Reduction .................................58
Output Select ................................................58
Color System ................................................58
Program Title Display ....................................58
AV MODE ..........................................................59
Input Signal (for Analog PC input mode only) .....59
Closed Captions and Digital Closed Captions ....60
Caption Setup ...................................................61
Secret number setting for parental control (AV
input mode only) ..............................................62
Parental control (setting V-CHIP level) ................64
How to temporarily release the V-CHIP BLOCK .67
Reactivating the temporarily released V-CHIP
BLOCK............................................................67
Other viewing options ...........................................68
Freezing images.................................................68
Presetting remote control function .....................68
Appendix ................................................................72
Troubleshooting .................................................72
Troubleshooting-Digital broadcasting .................72
5
General notes
Accessories
Accessories included with the LC-32HT3U/LC-37HT3U/LC-42HT3U
See pages 8, 12 and 13 of the operation manual of LC-32HT3U/LC-37HT3U/LC-42HT3U.
Optional accessories for the LC-32HT3U/LC-37HT3U/LC-42HT3U
• Remote Replicator: Stores the TV settings from one TV (LC-32HT3U/LC-37HT3U/LC-42HT3U) and transfers the TV settings
to other TVs (LC-32HT3U/LC-37HT3U/LC-42HT3U).
• Remote control unit: Sets or adjusts the TV. The remote control unit is for hotel operators only and should not be used by hotel guests.
TV modes index
The diagram below explains the TV modes of the LC-32HT3U/LC-37HT3U/LC-42HT3U models.
Press MASTER
PPV TV mode
c
(ON LINE/STAND ALONE)
d
(Factory preset)
Set from the TV Mode menu
c
MASTER mode
Normal TV mode
Press MASTER
ROOM mode
d
Press ROOM
PPV TV mode: This mode has two modes, MASTER mode and ROOM mode.
• MASTER mode: Allows hotel operators to set or adjust the TV.
• ROOM mode: This mode is for hotel guests.
Normal TV mode: The TV functions as a normal TV. (See page 29.)
Explanation of the remote control unit, TV modes and the buttons on the TV
The accessible buttons of the remote control unit and TV panel will change depending on the TV mode.
Remote control unit of
LCD TV
MASTER mode
ONLINE*1
PPV TV
Room
mode
R/C
Buttons
Room
mode
g
g
On
Off
On
–
TV
buttons
–
TV
Buttons*3 Off
g
R/C
Buttons
On
g
Off
On
–
g
–
TV
Buttons*3 Off
l ........ Disabled
g
g
g
–
g
g
–
g
–
g
Normal TV
g ........ Enabled
Other
functions
g
MASTER mode
STAND
ALONE*2
Same
function as
TV buttons
Remote
Replicator
Remote
control unit
supplied by MASTER
PPV
or ROOM Other
buttons
provider
button
g
g
–
g
g*4
........ No effect
*1 ONLINE: When the TV is connected to the PPV terminal box, and the PPV terminal box is operational
*2 STAND ALONE: When the TV is not connected to the PPV terminal box or the TV is connected to the PPV terminal box, but the PPV terminal box is not operational
*3 TV INPUT Button: You can change the input source using INPUT on the TV when “TV Buttons” and “TV INPUT Button” are set to Respond.
*4 The LEARN/TEACH buttons also work in Normal TV mode. (The DIAGNOSTICS button will have no effect.)
NOTE
• Depending on the Room Mode setting (see page 11, 14, 18, 21 and 24), press MASTER or ROOM on the Remote Replicator
to turn on or turn off the TV.
6
General notes
Quick TV cloning guide (for the PPV TV)
The steps below show the process of setting TVs for hotel guest rooms.
1
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
2
Use the remote control unit to set or adjust the TV (TV with the master settings).
(LODGENET users: See pages 9 to 12. ONCOMMAND users: See pages 13 to
16. NXTV users: See pages 17 to 19. nSTREAMS users: See pages 20 to 22.
SeaChange users: See pages 23 to 25.)
3
Connect the TRANSPORT terminal of the TV to the TRANSPORT (RJ-11)
connector of the Remote Replicator with the supplied RJ-11 cable.
• For NXTV users, perform steps on page 27 before connecting the TV and the
Remote Replicator.
RJ-11 cable
4
Press MEMORY SELECT on the Remote Replicator to select the memory bank number in which you
want to store the data. (See pages 26 and 27.)
5
Press LEARN on the Remote Replicator to store the TV settings in the Remote Replicator. (See pages 26
and 27.)
6
Disconnect the RJ-11 cable from the TV (TV with the master settings), and connect to the other TV (TV to
be cloned) that you want to transfer the data.
• For NXTV users, perform steps on page 27 before connecting the TV and the Remote Replicator.
7
Press MEMORY SELECT on the Remote Replicator to select the memory bank number that contains the
data you want to send. (See pages 26 and 27.)
8
Press TEACH on the Remote Replicator to transfer the TV settings. (See pages 26 and 27.)
7
General notes
Quick TV cloning guide (for the Normal TV)
If already in Normal TV mode, begin from step 6.
1
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
2
Press MENU and the MENU screen displays.
3
Press c/d to select “PPV TV”.
PPV TV
[PPV TV]
TV Mode
PPV System
[LODGENET]
Function Menu Setup
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
Reset
4
5
Press a/b to select “TV Mode”, and then press ENTER.
Press c/d to select “Normal TV”, and then press ENTER.
• When you select “Normal TV”, enter “2433” for the password, and then the TV will automatically turn off after the
message. The TV enters the Normal TV mode when it is turned on again.
Selected item
8
Description
PPV TV
Sets and adjusts the TV, and
communicates with the PPV terminal
box.
Normal TV
Functions as a normal TV.
6
Use the remote control unit to set or adjust the TV. (TV with the master settings) (See pages 36, 44 to 67.)
7
Perform step 3 through step 8 for PPV TV on the previous page. (See page 7.)
8
Wait until the power is completely off.
To turn the power on again after performing TEACH, wait approximately 15 seconds after the TV enters
Standby Mode (dark screen). Then turn the power on.
Quick setup for LODGENET users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV TV
[PPV TV]
TV Mode
PPV System
[LODGENET]
Function Menu Setup
You can select the menu items to display on the
Function menu. (See page 30.) The Function menu can
be displayed by pressing the TV FUNCTION button
on the LODGENET remote control unit.
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Function Menu Setup”,
and then press ENTER.
3
Press a/b to select the desired item, and
then press ENTER to select “On” or “Off”.
Function Menu Setup
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
Reset
PPV System
Selected item
Language
You can select a language from
English, French and Spanish for On
Screen Display. (See page 30.)
View Mod
You can select the screen size.
(See page 30.)
Input Select
You can select the input source.
(See page 30.)
Parental CTRL
You can set the secret number.
(See pages 62 to 67.)
Sets the Pay Per View system.
4
1
Description
Press MENU to exit.
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “PPV System”, and then
press ENTER.
4
Press a/b to select “LODGENET”, and then
press ENTER.
NOTE
• Parental CTRL setting from the hotel server has priority
over the TV setting.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
9
Quick setup for LODGENET users
Default Channel
Sets the default channel.
1
2
1
Repeat steps 1 and 2 in Default Channel.
2
Press a/b to select “Default Volume”, and
then press ENTER.
3
Press a/b to select “Volume” or “Auto
adjustment”.
4
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
5
Press MENU to exit.
Press c/d to select “PPV TV”.
Press a/b to select “Default Channel”, and
then press ENTER.
4
Press a/b to select “Analog/Digital”, and then
press ENTER.
5
Press c/d to select “Analog” or “Digital”, and
then press ENTER.
6
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
7
Input the default channel number by using
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
Press MENU to exit.
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE)
10
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
Press MENU and the MENU screen displays.
3
8
Default Volume
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 3, and then
press ENTER.
Quick setup for LODGENET users
Room Mode
CH Re-Map
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Room Mode”, and then
press ENTER.
1
Press MENU and the MENU screen displays.
4
Press a/b to select the desired item, and
then press ENTER.
2
Press c/d to select “PPV TV”.
5
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV INPUT
Button”, press c/d to select “Respond” or
“No Respond”, and then press ENTER.
3
Press a/b to select “CH Re-Map”, and then
press ENTER.
4
Press a/b to select “CH Set”, and then press
ENTER.
5
Press a/b/c/d to select the Logical CH you
want to set, and then press ENTER.
6
Press a/b to select “ANALOG” , “DIGITAL”
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
Selected item
Set the maximum volume in the
ROOM mode.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
6
•
•
•
•
•
Description
Maximum
Volume
TV INPUT
Button
•
Sets the channel order (logical channel) to your
preferred order.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press MENU to exit.
NOTE
Maximum Volume setting from the hotel server has priority
over the TV setting.
When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
“TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 4.
4
Repeat the steps 5 and 6 until all desired
logical channels are set.
5
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press c/d to
select “Yes”, and then press ENTER.
11
Quick setup for LODGENET users
View Mode
You can set the picture size for when the TV is turned
on.
1
Press VIEW MODE.
2
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• The View Mode menu displays.
• You can sequentially select a View Mode that has
its own aspect ratio.
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the
menu items, perform steps 3 to 8 on
page 7 to complete the storing and
transferring of the data to the TV
12
Quick setup for ONCOMMAND users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV TV
TV Mode
PPV System
Default Channel
Sets the default channel.
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Default Channel”, and
then press ENTER.
3
Press a/b to select “Analog/Digital”, and
then press ENTER.
4
Press c/d to select “Analog” or “Digital”, and
then press ENTER.
5
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
6
Input the default channel number by using
0 – 9, and then press ENTER.
[PPV TV]
[ONCOMMAND]
Default Channel
[2]
Default Volume
[20]
Room Mode
Label Input
CH Re-Map
Reset
PPV System
Sets the Pay Per View system.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
7
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “PPV System”, and then
press ENTER.
4
Press a/b to select “ONCOMMAND”, and
then press ENTER.
Press MENU to exit.
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
13
Quick setup for ONCOMMAND users
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Default Volume”, and
then press ENTER.
4
Press a/b to select “Volume” or “Auto
adjustment”.
5
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
6
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
1
Repeat steps 1 and 2 in Default Volume.
2
Press a/b to select “Room Mode”, and then
press ENTER.
3
Press a/b to select the desired item, and
then press ENTER.
4
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press c/d to select
“Respond” or “No Respond”, and then press
ENTER.
Selected item
Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press MENU to exit.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
14
Room Mode
5
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
Quick setup for ONCOMMAND users
Label Input
You can assign a label to each input source and
channel.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Label Input”, and then
press ENTER.
4
5
Press a/b to select the desired input source,
and then press ENTER
For “INPUT 1” to “INPUT 6”:
1 Press a/b/c/d and ENTER to select
each character of the new name for the
input source.
2 Press a/b/c/d to select “END”, and
then press ENTER to complete the
labeling.
For “TV”:
1 Press c/d to select “Air” or “Cable”, and
then press b to move down.
2 Press c/d to select the channel number
you want to label, and then press b to
move down.
CH Re-Map
Sets the channel order (logical channel) to your
preferred order.
1
Press MENU and the MENU screen displays
2
Press c/d to select “PPV TV”.
3
Press a/b to select “CH Re-Map”, and then
press ENTER.
4
Press a/b to select “CH Set”, and then press
ENTER.
5
Press a/b/c/d to select the Logical CH you
want to set, and then press ENTER.
6
Press a/b to select “ANALOG” , “DIGITAL”
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• The channel number is based on the physical
number, and it may be different from the
displayed channel number specified by the
hotel server.
3 Select “Select”, and then press ENTER.
4 Press a/b/c/d and ENTER to select
each character of the new name for the
channel.
5 Press a/b/c/d to select “END”, and
then press ENTER to complete the
labeling.
6
Press MENU to exit.
NOTE
• Depending on the system version, you can assign a label
using the hotel server.
• When you change the input name for “INPUT 1” through
“INPUT 6” in the Label Input setting, the input name
you have labeled will not change even if you change the
Language setting.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
7
Repeat the steps 5 and 6 until all desired logical
channels are set.
8
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press c/d to
select “Yes”, and then press ENTER.
15
Quick setup for ONCOMMAND users
View Mode
You can set the picture size for when the TV is turned
on.
1
Press VIEW MODE.
2
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• The View Mode menu displays.
• You can sequentially select a View Mode that has
its own aspect ratio.
View Mode
Side Bar
S. Stretch
Zoom
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
NOTE
• Some ONCOMMAND PPV systems are not compatible
with changing the View Mode. Confirm that your system
is compatible with a View Mode before you set it. If your
system is not compatible with the desired mode, set the
View Mode default setting to “S.Stretch”.
16
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV
Quick setup for NXTV users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV TV
TV Mode
PPV System
Default Channel
Sets the default channel.
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Default Channel”, and
then press ENTER.
3
Press a/b to select “Analog/Digital”, and
then press ENTER.
4
Press c/d to select “Analog” or “Digital”, and
then press ENTER.
5
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
6
Input the default channel number by using
0 – 9, and then press ENTER.
[PPV TV]
[NXTV]
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
Reset
PPV System
Sets the Pay Per View system.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
7
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “PPV System”, and then
press ENTER.
4
Press a/b to select “NXTV”, and then press
ENTER.
Press MENU to exit.
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
17
Quick setup for NXTV users
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
Room Mode
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
1
Repeat steps 1 and 2 in Default Volume.
2
Press a/b to select “Room Mode”, and then
press ENTER.
3
Press a/b to select the desired item, and
then press ENTER.
4
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Default Volume”, and
then press ENTER.
4
Press a/b to select “Volume” or “Auto
adjustment”.
5
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
6
Press MENU to exit.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
18
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press c/d to select
“Respond” or “No Respond”, and then press
ENTER.
Selected item
Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
5
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
Quick setup for NXTV users
CH Re-Map
Sets the channel order (logical channel) to your
preferred order.
View Mode
You can set the picture size for when the TV is turned
on.
1
Press VIEW MODE.
2
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• The View Mode menu displays.
• You can sequentially select a View Mode that has
its own aspect ratio.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “CH Re-Map”, and then
press ENTER.
4
Press a/b to select “CH Set”, and then press
ENTER.
5
Press a/b/c/d to select the Logical CH you
want to set, and then press ENTER.
View Mode
Side Bar
S. Stretch
Zoom
6
Press a/b to select “ANALOG” , “DIGITAL”
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
7
Repeat the steps 5 and 6 until all desired
logical channels are set.
8
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press c/d to
select “Yes”, and then press ENTER.
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
19
Quick setup for nSTREAMS users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
Selected item
Description
Language
You can select a language from
English, French and Spanish for On
Screen Display. (See page 30.)
View Mode
You can select the screen size.
(See page 30.)
Input Select
You can select the input source.
(See page 30.)
Parental CTRL
You can set the secret number.
(See pages 62 to 67.)
PPV TV
TV Mode
PPV System
[PPV TV]
[nSTREAMS]
Function Menu Setup
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
4
Press MENU to exit.
Reset
PPV System
NOTE
• Parental CTRL setting from the hotel server has priority
over the TV setting.
Sets the Pay Per View system.
Default Channel
Sets the default channel.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “PPV System”, and then
press ENTER.
4
Press a/b to select “nSTREAMS”, and then
press ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
Function Menu Setup
You can select the menu items to display on the
Function menu. (See page 30.) The Function menu can
be displayed by pressing the FUNCTION button on the
nSTREAMS remote control unit.
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Function Menu Setup”,
and then press ENTER.
3
Press a/b to select the desired item, and
then press ENTER to select “On” or “Off”.
20
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Default Channel”, and
then press ENTER.
3
Press a/b to select “Analog/Digital”, and
then press ENTER.
4
Press c/d to select “Analog” or “Digital”, and
then press ENTER.
5
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
6
Input the default channel number by using 0 –
9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
7
Press MENU to exit.
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
Quick setup for nSTREAMS users
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Default Volume”, and
then press ENTER.
4
Room Mode
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
previously used volume setting.
1
Repeat steps 1 and 2 in Default Volume.
2
Press a/b to select “Room Mode”, and then
press ENTER.
3
Press a/b to select the desired item, and
then press ENTER.
4
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press c/d to select
“Respond” or “No Respond”, and then press
ENTER.
Selected item
5
6
Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
Press a/b to select “Volume” or “Auto
adjustment”.
R/C Buttons
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
Press MENU to exit.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
5
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
21
Quick setup for nSTREAMS users
CH Re-Map
Sets the channel order (logical channel) to your
preferred order.
View Mode
You can set the picture size for when the TV is turned
on.
1
Press VIEW MODE.
2
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• The View Mode menu displays.
• You can sequentially select a View Mode that has
its own aspect ratio.
1
Press MENU and the MENU screen displays.
View Mode
2
Press c/d to select “PPV TV”.
Side Bar
S. Stretch
3
Press a/b to select “CH Re-Map”, and then
press ENTER.
4
Press a/b to select “CH Set”, and then press
ENTER.
5
Press a/b/c/d to select the Logical CH you
want to set, and then press ENTER.
6
Press a/b to select “ANALOG” , “DIGITAL”
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
7
Repeat the steps 5 and 6 until all desired
logical channels are set.
8
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press c/d to
select “Yes”, and then press ENTER.
Zoom
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
22
Quick setup for SeaChange users
For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV TV
TV Mode
PPV System
Default Channel
Sets the default channel.
1
Repeat steps 1 and 2 in PPV System.
2
Press a/b to select “Default Channel”, and
then press ENTER.
3
Press a/b to select “Analog/Digital”, and
then press ENTER.
4
Press c/d to select “Analog” or “Digital”, and
then press ENTER.
5
Press a/b to select “Analog” or “Digital”, and
then press ENTER.
6
Input the default channel number by using
0 – 9, and then press ENTER.
[PPV TV]
[SeaChange]
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
Reset
PPV System
Sets the Pay Per View system.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specified by the hotel server.
7
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “PPV System”, and then
press ENTER.
4
Press a/b to select “SeaChange”, and then
press ENTER.
Press MENU to exit.
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
23
Quick setup for SeaChange users
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
Room Mode
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
1
Repeat steps 1 and 2 in Default Volume.
2
Press a/b to select “Room Mode”, and then
press ENTER.
3
Press a/b to select the desired item, and
then press ENTER.
4
For “Maximum Volume”, press c/d to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press c/d to select
“Respond” or “No Respond”, and then press
ENTER.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
3
Press a/b to select “Default Volume”, and
then press ENTER.
Maximum
Volume
Set the maximum volume in the
ROOM mode.
4
Press a/b to select “Volume” or “Auto
adjustment”.
R/C Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons
Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
5
6
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
Press MENU to exit.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
24
Selected item
5
Description
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV.
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.
Quick setup for SeaChange users
CH Re-Map
Sets the channel order (logical channel) to your
preferred order.
View Mode
You can set the picture size for when the TV is turned
on.
1
Press VIEW MODE.
2
Press VIEW MODE or a/b while the View
Mode menu is still on the screen.
• The View Mode menu displays.
• You can sequentially select a View Mode that has
its own aspect ratio.
1
Press MENU and the MENU screen displays.
View Mode
2
Press c/d to select “PPV TV”.
Side Bar
S. Stretch
3
Press a/b to select “CH Re-Map”, and then
press ENTER.
4
Press a/b to select “CH Set”, and then press
ENTER.
5
Press a/b/c/d to select the Logical CH you
want to set, and then press ENTER.
Zoom
6
Press a/b to select “ANALOG” , “DIGITAL”
or the desired input source, and then press
ENTER.
When you select “ANALOG” or “DIGITAL”,
input the channel number by using 0 – 9, and
then press ENTER.
• Select “Reset” for resetting the channel to the
factory preset value.
• When you input digital channels with a single
number after the dot, input 0 after the dot.
(e. g., Channel 22.1):
Press 0s2s2s0s1sENTER
7
Repeat the steps 5 and 6 until all desired
logical channels are set.
8
Press MENU to exit.
NOTE
• For resetting all logical channels to the factory preset
values, select “CH Reset All” in step 4, press c/d to
select “Yes”, and then press ENTER.
Stretch
Side Bar:
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at the
top and bottom of the screen.
You can set other menu items, such as
Brightness, in the PPV TV mode. (See
pages 41 to 67.)
When you are finished setting the menu
items, perform steps 3 to 8 on page 7
to complete the storing and transferring
of the data to the TV.
25
Remote Replicator
Part names
1
LEARN indicator: Lights up while storing the TV
settings from the TV to the Remote Replicator.
2 DONE indicator: Lights up when storing or
transferring is finished.
3 TEACH indicator: Lights up while transferring the
TV settings from the Remote Replicator to the TV.
4 MEMORY SELECT indicator: Indicates which
memory bank is selected.
5 LEARN button: Store the TV settings from the TV
to the Remote Replicator.
6 TEACH button: Transfer the TV settings from the
Remote Replicator to the TV.
7 ROOM button: The TV turns off and enters the
ROOM mode when the TV is in the MASTER
mode. You can turn on or off the TV when the TV
is in the ROOM mode.
8 MASTER button: The TV is turned on and enters
the MASTER mode when the TV is turned off. The
menu screen displays when the TV is turned on in
the MASTER mode or the ROOM mode. The TV is
turned off and enters the PPV TV mode when the
TV is in the Normal TV mode.
9 DIAGNOSTICS button: Perform operational tests.
10 MEMORY SELECT button: Select the memory
bank to store or transfer data.
11 TRANSPORT (RJ-11) connector: Connect to the
TV when storing or transferring the data.
1
2
5
6
7
8
9
10
3
4
11
NOTE
• When using the Remote Replicator, point it at the TV.
• The TRANSPORT (RJ-11) connector is designed for hotel
communication. Do not use it for other purposes.
Inserting the battery
1
Open the battery cover.
2
Attach a commercially
available 9V battery.
4
Close the battery cover.
• Connect the e/f terminals of the
battery to the battery connector of
the Remote Replicator.
3
Insert the battery.
NOTE
• See page 32 for the details on the Remote Replicator and
the battery.
26
Remote Replicator
Storing the settings from the TV
1
Connect the TRANSPORT (RJ-11) connector
of the Remote Replicator to the TRANSPORT
terminal of the TV (TV with the master settings)
with the supplied RJ-11 cable.
2
Press MEMORY SELECT to select the
memory bank.
3
Press LEARN.
4
The data transfer process is displayed on the screen.
5
The DONE indicator lights up and a message
is displayed on the screen after the data
storage is complete.
• When the TV is off, the TV will not respond when
LEARN is pressed.
Storing the settings from the TV
(for NXTV users only)
1
Press MASTER to turn on the TV in the
MASTER mode.
2
Press TEACH.
3
Repeat steps 1 to 5 in Storing the settings
from the TV.
• A message appears, and then disappears in a few
seconds.
• When you connect the Remote Replicator to the
TV, use the supplied RJ-11 cable, not the cable
connected to the PPV terminal box.
Transferring the settings to the TV
(for NXTV users only)
1
Press MASTER to turn on the TV in the
MASTER mode.
Connect the TRANSPORT (RJ-11) connector
of the Remote Replicator to the TRANSPORT
terminal of the TV (TV to be cloned) with the
supplied RJ-11 cable.
2
Press TEACH.
2
Press MEMORY SELECT to select the
memory bank.
3
Repeat steps 1 to 5 in Transferring the
settings to the TV.
3
Press TEACH.
4
The data transfer process is displayed on the
screen.
5
The DONE indicator lights up and a message
is displayed on the screen after the data
transfer is complete.
Transferring the settings to the TV
1
• When you connect the Remote Replicator to the
TV, use the supplied RJ-11 cable, not the cable
connected to the PPV terminal box.
• When the TV is off, the TV will not respond when
TEACH is pressed.
NOTE
• After performing TEACH while in Normal TV Mode, wait
until the power is completely off. To turn the power on
again after performing TEACH, wait approximately 15
seconds after the TV enters Standby Mode (dark screen).
Then turn the power on.
• A message appears, and then disappears in a few
seconds.
Configuration memory banks
Three different full TV configuration setups can be
stored in the Remote Replicator simultaneously.
This allows different TV configurations to be taught to
different TVs without having to perform the learning
procedure over again.
1
Press MEMORY SELECT.
2
Each time you press MEMORY SELECT, the
MEMORY SELECT indicator switches between
memory banks.
DIAGNOSTICS mode (PPV TV only)
Press DIAGNOSTICS to perform the operational tests
as shown below.
— Checks the connection between the TV and the PPV
terminal box
— Displays the software version
— Switches to the default channel
NOTE
• When the TV is off, the TV will automatically turn on and
display the result of test after pressing DIAGNOSTICS.
• DIAGNOSTICS mode is not available for NXTV users.
• Cannot be used while in Normal TV Mode.
27
Remote Replicator
NOTE
Notes on using the Remote
Replicator while in Normal TV
Mode
• The data from performing LEARN while in Normal TV Mode
cannot be used when performing TEACH while in PPV TV
Mode. Perform TEACH after switching to Normal TV Mode.
(Also, data in the Remote Replicator from performing
LEARN while in PPV TV Mode cannot be used when
performing TEACH while in Normal TV Mode. Perform
TEACH after switching to PPV TV Mode.)
• Select TV Mode as the viewed Input Source when
performing LEARN/TEACH while in Normal TV Mode.
(When viewing the Input 1-5 external input mode, LEARN/
TEACH cannot be performed.)
• When LEARN/TEACH is performed in Normal TV Mode, the
analog and digital (Air, Cable) channel lists will be copied.
Channel SKIP settings will also be copied.
For digital channel lists, the maximum number of channels
that can be copied is 300.
(The channels made available from Channel Search or
tuning channels in the source TV of the copied channel list
will all be copied. After copying, all the channels that could
be tuned in the source TV will be tunable.)
• There are some menu setting parameters that cannot be
copied. Fine Sync. Adjustment (page 53), Input Signal (page
59), Audio only (page 58), and AV Mode User (page 59)
setting parameters cannot be copied.
(Amongst the User settings, the currently viewed Input
Source parameters can be copied.)
28
Other settings for the PPV TV mode
Reset
PPV TV menu
The PPV TV menu displays when MENU on the remote
control unit is pressed, and the TV is in the PPV TV
mode.
See below for “TV Mode”, and see page 9 to 25 for the
other menu items.
TV Mode
Sets the TV to the Normal TV mode.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “PPV TV”.
All of the TV settings such as “Picture”, “Audio” and
“Input Label” will return to the factory presets after
performing “Reset” in the PPV TV mode. The Remote
Replicator only stores the TV settings that differ from
the factory presets. To transfer the data to other
TVs faster, perform “Reset”, and then set up the TV
settings.
1
Repeat steps 1 and 2 in TV Mode.
2
Press a/b to select “Reset”, and then press
ENTER.
3
Press c/d to select “Yes”, and then press
ENTER.
4
Press MENU to exit.
PPV TV
TV Mode
[PPV TV]
PPV System
[LODGENET]
Function Menu Setup
Default Channel
[2]
Default Volume
[20]
Room Mode
CH Re-Map
Reset
3
Press a/b to select “TV Mode”, and then
press ENTER.
4
Press c/d to select “Normal TV”, and then
press ENTER.
• When you select “Normal TV”, enter “2433” for the
password, and then the TV will automatically turn
off after the message. The TV enters the Normal
TV mode when it is turned on again.
Selected item
Description
PPV TV
Sets and adjusts the TV, and
communicates with the PPV terminal
box.
Normal TV
Functions as a normal TV.
NOTE
• Press MASTER or ROOM on the Remote Replicator to
return to the PPV TV mode from the Normal TV mode
29
Other settings for the PPV TV mode
Function menu (for LODGENET
and nSTREAMS users only)
You can display the Function menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit. The Function menu items
displayed such as “Parental CTRL”, “Language”, “View
Mode” and “Input Select” depend on the Function
Menu Setup.
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
1
2
Press FUNCTION to display the Function
menu.
Press c/d to select “Function”.
Option menu (for LODGENET and
nSTREAMS users only)
You can display the Option menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit when the TV is connected to a
PC-IN equipment and “INPUT6” is selected from the
INPUT SOURCE menu (see page 52).
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
1
Press FUNCTION to display the Option menu.
2
Press c/d to select “Option”.
Option
Function
Input Signal
[Off]
Sleep Timer
[1024g768]
Auto Sync.
Parental CTRL
Closed Caption
Language
View Mode
[--]
3
Press a/b to select the desired menu item,
and then press SELECT.
4
Perform the steps below for each item.
[English]
[S.Stretch]
Input Select
3
4
Press a/b to select the desired menu item,
and then press SELECT.
Selected item
• The items in the Function menu depend on the
Function Menu Setup.
Input Signal
Press a/b to select the desired input
signal, and then press SELECT.
Auto Sync.
Press c/d to select “Yes”, and then
press SELECT.
Perform the steps below for each item.
Selected item
Description
Sleep Timer
Press a/b to select the desired
setting, and then press SELECT.
Parental CTRL
See pages 62 to 67.
Closed Caption
Press SELECT to select the desired
setting.
Language
Press a/b to select the desired
language, and then press SELECT.
View Mode
Press a/b to select the desired screen
size, and then press SELECT.
Input Select
Press a/b to select the desired input
source, and then press SELECT.
4
Press FUNCTION to exit.
NOTE
• Parental CTRL may not be available when the hotel server
commands not to display the Parental CTRL menu.
• Sleep Timer and Parental CTRL settings are effective for 24
hours. The other settings will be canceled when the TV is
turned off.
30
5
Description
Press FUNCTION to exit.
NOTE
• “Input Signal” and “Auto Sync.” are grayed out when “Input
Select” is set to “DIGITAL”.
Remote control unit
1
Part names
1
2
3
14
4
2
3
15
4
16
5
6
7
8
9
10
11
12
13
5
14
6
17
7
18
8
19
9
20
10
21
16
22
17
23
24
18
11
25
15
19
20
21
22
26
23
24
12
13
27
25
26
27
TV POWER: Switches the TV power on or enters
standby. (See page 35.)
DISPLAY: Displays the channel information.
SOURCE POWER: Turns the power of the external
equipment on and off.
External equipment operational buttons: Operates
the external equipment.
0 – 9: Sets the channel. (See page 37.)
• (DOT): (See pages 37 and 70)
INPUT: Selects a TV input source. (TV, INPUT 1, INPUT 2,
INPUT 3, INPUT 4, INPUT 5, INPUT 6) (See pages 51.)
VOL k/l: Sets the volume. (See page 38.)
SURROUND: Selects Surround settings. (See page 38.)
FREEZE: Sets the still image. Press again to return to
normal screen. (See page 68.)
EXIT: Turns off the menu screen.
SLEEP: Sets the sleep timer. (See page 55.)
AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts. (See page 39.)
FUNCTION: Switches the remote control unit for TV,
CBL/SAT, VCR, DVD and AUDIO operation. Indicator
lights up for the current mode. (See pages 68 to 71 for
details.)
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
LIGHT D: When pressed all buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
VIEW MODE: Selects the screen size. (See pages 56
and 57.)
ENT: Jumps to a channel after selecting with the 0–9
buttons.
FLASHBACK: Returns to the previous channel or
external input mode. (See page 37.)
CHr/s: Selects the channel. (See page 37.)
MUTE: Mutes the sound. (See page 38.)
MENU: Displays the menu screen.
a/b/c/d/ENTER: Selects a desired item on the
screen.
RETURN: Returns to the previous menu screen.
FAVORITE CH
A, B, C, D: Selects 4 preset favorite channels in 4
different categories. (See page 46 for details.)
While watching, you can toggle the selected channels by
pressing A, B, C and D.
FAVORITE: Set the favorite channels. (See page 46.)
CC: Displays captions from a closed-caption source. (See
page 60.)
AV MODE: Selects an audio or video setting.
(When the input source is TV, INPUT 1, 2 or 3:
STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),
DYNAMIC. When the input source is INPUT 4, 5 or 6:
STANDARD, MOVIE, GAME, PC, USER, DYNAMIC
(Fixed), DYNAMIC) (See page 59.)
NOTE
• When using the remote control unit, point it at the TV.
• The buttons on the remote control unit may not function
depending on the Room Mode setting. (See page 6.)
31
Remote control unit
Inserting the batteries
If the remote control unit fails to operate TV functions, replace the batteries in the remote control unit.
Open the battery cover.
1
2
Insert two “AAA” size batteries
(supplied with the product).
3
Close the battery cover.
• Place the batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Using the remote control unit
Use the remote control unit (Remote Replicator) by pointing it towards the remote
control sensor on the TV. Objects between the remote control unit (Remote
Replicator) and the remote control sensor may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit (Remote Replicator) to shock. In addition, do not
expose the remote control unit (Remote Replicator) to liquids, and do not place in an
area with high humidity.
• Do not install or place the remote control unit (Remote Replicator) under direct sunlight.
The heat may cause deformation of the remote control unit (Remote Replicator).
• The remote control unit (Remote Replicator) may not work properly if the remote control
sensor on the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit (Remote Replicator)
closer to the remote control sensor.
17n(5 m)
30°
30°
17n(5 m)
Remote control
sensor
Remote control
sensor
15°
15°
Remote Replicator
Remote control unit
32
Preparation
You can connect many types of external equipment
to your TV like a Blu-ray disc player, HD-DVD player,
DVD player, VCR, Digital TV tuner, HDMI equipment,
game console or camcorder. To view external source
images, select the input source from INPUT on the
remote control unit or on the TV. (See pages 51 and
52.)
CAUTION
• To protect equipment, always turn off the TV before
connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc
player, etc.) carefully before making connections.
• If your Blu-ray disc player offers a choice of output formats,
please select 720p for use with this TV.
Connecting a VCR, game console
or camcorder
A VCR, game console, camcorder and other
audiovisual equipment can be conveniently connected
using the INPUT 1 to 3 terminals.
When using S-VIDEO cable (commercially
available).
Connecting a Blu-ray disc player,
HD-DVD player, DVD player or a
Digital TV STB (Air or Cable)
You can use the INPUT 1, INPUT 2 or INPUT 3
terminals when connecting to a Blu-ray disc player,
HD-DVD player, DVD player, a Digital TV STB (Air or
Cable) and other audiovisual equipment.
VCR/Game console/
Camcorder
When using composite cable
(commercially available).
When using composite cable
(commercially available).
VCR/Game console/
Camcorder
Blu-ray disc player/
HD-DVD player/ DVD
player/Digital TV STB
When using component cable. (INPUT 1 or 2 (LC42HT3U only))
NOTE
• The S-VIDEO terminal takes priority over the video
terminals. (INPUT 2 only for LC-32HT2U/LC-37HT3U,
INPUT3 only for LC-42HT3U)
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. (See page 50 for details.)
PCM audio outputs from the terminal.
Component video cable
(commercially available)
Audio cable
(commercially
available)
External
audio
devices
Optical fiber cable
(commercially available)
Blu-ray disc player/HD-DVD
player/ DVD player/Digital TV STB
33
Preparation
Connecting HDMI equipment
You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI equipment.
HDMI cable
(commercially available)
HDMI equipment
NOTE
• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
• When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.
For an incompatible video signal: “An incompatible video signal has been received. Check the output device settings.”
For an incompatible audio signal: “An incompatible audio signal has been received. Check the output device settings.”
Connecting a PC
When connecting to a PC with an analog RGB terminal. (INPUT 6)
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
PC
When connecting to a PC with an HDMI terminal. (INPUT 4 or 5)
HDMI cable
(commercially available)
PC
NOTE
• The HDMI terminals only support digital signal.
PC compatibility chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 59 to set PC input signals.
PC
Resolution
720 x 400
VGA
PC
640 x 480
SVGA
800 x 600
XGA
1024 x 768
WXGA
1360 x 768
Horizontal Frequency
Vertical Frequency
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7 kHz
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
34
VESA Standard
O
O
O
O
O
O
O
O
O
O
O
Watching TV
See page 29 to switch the TV to the Normal TV mode.
Simple operations for watching a TV program
Turning on the power
Press POWER on the TV, or TV POWER on the
remote control unit.
• POWER indicator (Green): The TV is on. (After a few
seconds, a window appears with sound.)
NOTE
• The initial setup starts after the TV is switched from the
PPV TV mode to the Normal TV mode. See page 44 for
performing EZ Setup from the Setup menu.
• Depending on the Room Mode setting (see pages 11, 14,
18, 21 and 24), press MASTER or ROOM on the Remote
Replicator to turn on the TV.
POWER
Turning off the power
Press POWER on the TV, or TV POWER on the
remote control unit.
POWER indicator
• The TV enters standby and the image on the screen
disappears.
• The POWER indicator on the TV turns off.
OPC indicator
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when POWER
is turned off.
• Depending on the Room Mode setting (see pages 11, 14,
18, 21 and 24), press MASTER or ROOM on the Remote
Replicator to turn off the TV.
SLEEP indicator
TV POWER (On/Standby)
TV status indicator (POWER)
ON
Lighting (Green)
OFF/Standby
Lights off
TV status indicator (OPC)
“Off” is selected in OPC setting
Lights off
“On” or “On: Display” is selected in OPC setting
Lighting (Green)
• See page 47 for details.
TV status indicator (SLEEP)
“Off” is selected in SLEEP setting
Lights off
“30”, “60”, “90” or “120” is selected in SLEEP setting
Lighting (Red)
• See page 55 for details.
35
Watching TV
Initial setup
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 32.)
2. Connect the antenna cable to the TV. (See page 15 of the operation manual for the LC-32HT3U/LC-37HT3U/LC-42HT3U.)
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area..
3
When “Air” is selected in Antenna setting:
Press c/d to select “Start”, and then press
ENTER.
Language
Air/Cable
CH Search
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
English
Français
Español
Cancel
Start
When “Cable” is selected in Antenna setting:
Press a/b to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
Language
Air/Cable
CH Search
Analog & Digital Search Start
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
2
Press c/d to select “Air” or “Cable”.
Press ENTER to enter the setting.
Example
Language
Analog Search Start
Cancel
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Example
Air/Cable
CH Search
CH Search
Air
Cable
Air
[ 25 ]
Found [ 20 ]
Air
ANALOG
2
Audio
:
MONO
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again. (See page 44.)
36
Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
Method 1
Using CH r/s on the remote control unit or on the
TV.
Method 2
1 Press FLASHBACK to switch to the previously tuned
channel.
2 Press FLASHBACK again to switch back to the currently
tuned channel.
NOTE
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5sENT
Air
Air
5
ANALOG
5
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1s1s5
Cable
Cable
1
Cable
ANALOG
115
11
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 s2 s • (DOT) s1sENT
Air
Air
2
Air
22
Air
22.
Air
22.1
DIGITAL
22.1
NOTE
• When you enter 0–9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
NOTE
• If you change the channel in the MASTER mode by using
0–9 on the remote control unit of LCD TV when the
TV is connected to the PPV terminal box, the terminal
transmission is used so the displayed channel number
will not match the inputted channel or channel may be
changed automatically.
37
Watching TV
Simple button operations for
changing volume/sound
■ Using MUTE on the remote control unit
Mutes the current sound output.
■ Changing the volume
You can change the volume on the TV or on the
remote control unit.
Press MUTE.
• M will be displayed on the screen for 30 minutes, and the
sound is silenced.
20
Mute
■ Using VOLk/l
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
Volume adjustment
20
NOTE
• VOLl/k on the TV operates the same as VOL k/l on
the remote control unit.
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
— Mute will be canceled if you press VOLk/l or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
■ Using SURROUND on the remote control unit
Audio status
Output Select
Output device
Speaker
Fixed
Variable
Variable sound
Mute
* When “Output Select” is set to “Variable”, the indicator on
the screen changes as shown below.
SURROUND produces Surround effect from the
speakers. Each time you press SURROUND, the
mode changes between On and Off.
Surround sound options
On: Makes it possible to enjoy natural, realistic
surround sound.
Off: Outputs the normal sound.
20
Surround : Off
NOTE
• See page 58 for details on the Output Select function.
38
Surround : On
NOTE
• You can have the same settings by choosing “Surround”
on the menu items. (See page 49.)
Watching TV
Setting MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound and
Secondary Audio Programs (SAP). The SAP feature
allows a TV station to broadcast other information,
which could be audio in another language or something
completely different like weather information.
Setting Digital broadcasting audio
mode
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
Press AUDIO to toggle
between audio modes.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
Example: when receiving Digital broadcasting
Air
DIGITAL
2.2
Audio1
Air
STEREO
DIGITAL
2.2
Audio2
NOTE
• MTS only operates while in TV mode.
You can change MTS as
shown below to match
the television broadcast
signal.
:
:
Air
STEREO
DIGITAL
2.2
Audio3
:
SURROUND
Press AUDIO to toggle
between audio modes.
Examples: when receiving MTS and SAP
STEREO mode
Air
ANALOG
MAINkSAP mode
Air
ANALOG
2
2
Audio
:
Air
Audio
STEREO
ANALOG
Air
:
2
MONO
Audio
STEREOkSAP mode
Air
ANALOG
:
Air
:
SAP
MONO mode
Air
ANALOG
2
Audio
MAIN
ANALOG
2
Audio
:
2
ST(SAP)
Audio
:
MONO
ANALOG
2
Audio
:
Air
SAP(ST)
ANALOG
2
Audio
:
MONO
39
Basic adjustment settings
Menu operation buttons
On-Screen Display
Use the following buttons on the remote control to
operate the menu.
Example
Option
1
Audio Only
Digital Noise Reduction
Input Select
[Off]
[VIDEO]
Output select
[Fixed]
Color System
[Auto]
3
Caption Setup
Program Title Display
2
[No]
4
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for
this item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates an item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
— Nothing is connected to the selected input
terminal.
— The function is not compatible with the
current input signal.
MENU:
Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the
screen or adjust a selected item.
ENTER:
Press to go to the next step or complete
the setting.
RETURN:
Press to return to the previous step.
: Select
ENTER
: Enter
RETURN
: Back
MENU
: Exit
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
40
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Basic adjustment settings
Icons
PPV TV
Indicates the menu item can be set or adjusted in the PPV menu.
NORMAL TV
Indicates the menu item can be set or adjusted in the Normal TV menu.
PPV TV
NORMAL TV
Indicates the menu item can be set or adjusted in both the PPV menu and Normal TV mode.
PPV TV mode menu items (for TV/INPUT 1/INPUT2/INPUT3)
Option
Picture
OPC .............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting ........................................................ Page 48
Film Mode ....................................................... Page 48
3D-Y/C ............................................................ Page 48
Monochrome ................................................... Page 48
Range of OPC ................................................. Page 48
Reset ................................................................ Page 47
Audio
Treble .......................................................................... Page 49
Bass ............................................................................. Page 49
Balance ........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
PPV TV
Digital Noise Reduction ............................................. Page 58
Color System .............................................................. Page 58
Caption Setup ............................................................. Page 61
Digital Setup
Audio Setup................................................................. Page 50
PPV TV
TV Mode ...................................................................... Page 29
PPV System ......................................... Pages 9, 13, 17, 20, 23
Function Menu Setup ........................................... Pages 9, 20
Default Channel ................................ Pages 10, 13, 17, 20, 23
Default Volume ................................ Pages 10, 14, 18, 21, 24
Room Mode....................................... Pages 11, 14, 18, 21, 24
Label Input .................................................................. Page 15
CH Re-Map........................................ Pages 11, 15, 19, 22, 25
Reset............................................................................ Page 29
Power Control
For LODGENET and nSTREAMS users only
No Signal Off ............................................................... Page 50
No Operation Off ........................................................ Page 50
Setup
EZ Setup ...................................................................... Page 44
CH Setup ..................................................................... Page 44
Antenna Setup-DIGITAL............................................. Page 45
Input Skip .................................................................... Page 52
Input Label ................................................................. Page 55
Position........................................................................ Page 54
Language..................................................................... Page 54
Function
Sleep Timer ................................................................. Page 30
Parental CTRL............................................................. Page 30
Closed Caption ........................................................... Page 30
Language..................................................................... Page 30
View Mode................................................................... Page 30
Input Select ................................................................ Page 30
NOTE
• Some menu items may not be displayed depending on the selected PPV System.
41
Basic adjustment settings
PPV TV mode menu items (for HDMI/PC-IN)
Picture
OPC .............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting ......................................................... Page48
Film Mode ....................................................... Page 48
Monochrome ................................................... Page 48
Range of OPC ................................................. Page 48
Reset ................................................................ Page 47
Audio
Treble .......................................................................... Page 49
Bass ............................................................................. Page 49
Balance ........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Power Control
No Signal Off ............................................................... Page 50
No Operation Off ........................................................ Page 50
Setup
Input Skip .................................................................... Page 52
Input Signal ................................................................. Page 59
Auto Sync. .................................................................. Page 53
Input Label ................................................................. Page 55
Fine Sync. ................................................................... Page 53
Position........................................................................ Page 54
Language..................................................................... Page 54
Option
Digital Noise Reduction ............................................. Page 58
HDMI Setup ................................................................. Page 52
NOTE
• Some menu items may not be displayed depending on the
selected PPV System.
42
PPV TV
PPV TV
TV Mode ...................................................................... Page 29
PPV System ......................................... Pages 9, 13, 17, 20, 23
Function Menu Setup ........................................... Pages 9, 20
Default Channel ................................ Pages 10, 13, 17, 20, 23
Default Volume ................................ Pages 10, 14, 18, 21, 24
Room Mode....................................... Pages 11, 14, 18, 21, 24
Label Input .................................................................. Page 15
CH Re-Map........................................ Pages 11, 15, 19, 22, 25
Reset............................................................................ Page 29
For LODGENET and nSTREAMS users only
Function
Sleep Timer ................................................................. Page 30
Parental CTRL............................................................. Page 30
Closed Caption ........................................................... Page 30
Language..................................................................... Page 30
View Mode................................................................... Page 30
Input Select ................................................................ Page 30
Option
Input Signal ................................................................. Page 30
Auto Sync. ................................................................... Page 30
Basic adjustment settings
NORMAL TV mode menu items
NORMAL TV
For TV/INPUT 1/INPUT 2/INPUT 3
For HDMI/DVI
Picture
OPC .............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting ........................................................ Page 48
Film Mode ....................................................... Page 48
Monochrome ................................................... Page 48
3D-Y/C ............................................................ Page 48
Range of OPC ................................................. Page 48
Reset ................................................................ Page 47
Picture
OPC .............................................................................. Page 47
Backlight ..................................................................... Page 47
Contrast ...................................................................... Page 47
Brightness .................................................................. Page 47
Color ........................................................................... Page 47
Tint .............................................................................. Page 47
Sharpness .................................................................. Page 47
Advanced
Color Temp. .................................................... Page 48
Black ............................................................... Page 48
I/P Setting ........................................................ Page 48
Film Mode ....................................................... Page 48
Monochrome ................................................... Page 48
Range of OPC ................................................. Page 48
Reset ................................................................ Page 47
Audio
Audio
Treble .......................................................................... Page 49
Bass ............................................................................. Page 49
Balance ........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Treble .......................................................................... Page 49
Bass ............................................................................. Page 49
Balance ........................................................................ Page 49
Surround...................................................................... Page 49
Reset............................................................................ Page 49
Power Control
Power Control
No Signal Off ............................................................... Page 50
No Operation Off ........................................................ Page 50
No Signal Off ............................................................... Page 50
No Operation Off ........................................................ Page 50
Setup
Setup
EZ Setup ...................................................................... Page 44
CH Setup ..................................................................... Page 44
Antenna Setup-DIGITAL............................................. Page 45
Input Skip .................................................................... Page 52
Input Label ................................................................. Page 55
Parental CTRL...................................................... Pages 62-67
Position........................................................................ Page 54
Language..................................................................... Page 54
Reset............................................................................ Page 54
Input Skip .................................................................... Page 52
Input Signal ................................................................. Page 59
Auto Sync. .................................................................. Page 53
Input Label ................................................................. Page 55
Fine Sync. ................................................................... Page 53
Position........................................................................ Page 54
Language..................................................................... Page 54
Reset............................................................................ Page 54
Option
Option
Audio Only ................................................................... Page 58
Digital Noise Reduction ............................................. Page 58
Input Select ................................................................. Page 51
Output Select .............................................................. Page 58
Color System .............................................................. Page 58
Caption Setup ............................................................. Page 61
Program Title Display ................................................ Page 58
Favorite CH ................................................................. Page 46
Audio Only ................................................................... Page 58
Digital Noise Reduction ............................................. Page 58
HDMI Setup ................................................................. Page 52
Output Select .............................................................. Page 58
NOTE
• Some menu items may not be displayed depending on the
selected input source.
Digital Setup
Audio Setup................................................................. Page 50
43
Basic adjustment settings
EZ Setup
PPV TV
NORMAL TV
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
MENU to display the MENU screen, and
1 Press
then press c/d to select “Setup”.
2
Press a/b to select “EZ Setup”, and then
press ENTER.
Channel Setup
PPV TV
NORMAL TV
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 40 for setting a
secret number.
• If you already set the Secret No., go to step 3. If
not, skip to step 4.
3
Input the 4-digit secret number by using 0–9.
3
Press a/b to select “Air/Cable”, and then
press ENTER.
4
Press a/b to select the desired language
listed on the screen, and then press ENTER.
4
Press c/d to select “Air” or “Cable”.
Press ENTER to enter the setting.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
5
Press MENU to exit.
5
Press c/d to select “Air” or “Cable”.
Press ENTER to enter the setting.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
6
When “Air” is selected in Antenna setting:
Press c/d to select “Start”, and then press
ENTER.
When “Cable” is selected in Antenna
setting:
Press a/b to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
1
Repeat steps 1 and 2 in Antenna setting in
Channel Setup.
2
Press a/b to select “CH Search”, and then
press ENTER.
3
When “Air” is selected in Antenna setting:
Press c/d to select “Start”, and then press
ENTER.
When “Cable” is selected in Antenna
setting:
Press a/b to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
7
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press MENU to exit.
4
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
• In the PPV TV mode, you need to perform EZ Setup when
the RF frequency setting for the channels that are the same
as the channel in the hotel server are changed.
44
Press MENU to exit.
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try channel search again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
• In the PPV TV mode, you need to perform CH Setup when
the RF frequency setting for the channels that are the same
as the channel in the hotel server are changed.
Basic adjustment settings
Channel memory setting
3
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “CH Setup”, and then
press ENTER.
Press a/b to select “Signal Strength”.
• The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
Signal Strength
Channel Strength
• If you already set the Secret No., input the 4-digit
secret number here. See page 62 for setting a
secret number.
Signal Strength
Current
3
Press a/b to select “CH Memory”, and then
press ENTER.
4
Press a/b to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
5
When viewing ANALOG broadcasts:
1 Press c/d to select the channel to skip,
and then press b to move down.
2 Press c/d to select “On”, and then press
ENTER.
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip,
and then press c/d to select “On”.
4
Max
0
Press MENU to exit.
Channel Strength
The channel signal strength can also be checked
separately.
1
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL.
2
Press a/b to select “Channel Strength”, and
then press ENTER.
3
Input the 2-digit channel number to check the
signal strength of the selected channel.
• On: Skips channels. (Channel selection disabled using CH
r/s.)
• Off: Does not skip channels. (Channel selection enabled
using CH r/s.)
6
0
• Make sure the signal is strong enough for each
channel.
Signal Strength
1 2 CH
Channel Strength
Press MENU to exit.
Signal Strength
NOTE
• Make sure what kind of connection is made with your TV.
• “CH Memory” is not available in the MASTER mode.
Antenna Setup - DIGITAL
PPV TV
NORMAL TV
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the “Antenna Setup DIGITAL” screen.
Current
4
0
Max
0
Press MENU to exit.
NOTE
• This function is available for DIGITAL (Air) only.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Antenna Setup DIGITAL”, and then press ENTER.
45
Basic adjustment settings
Favorite channel setting
NORMAL TV
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
Using FAVORITE CH on the remote control unit
1
Select the channel you want to register as a
favorite channel.
2
Press FAVORITE.
3
Press a/b to select “Register”, and then
press ENTER.
1
Select the channel you want to register as a
favorite channel.
4
Press a/b/c/d to select the position in the
category, and then press ENTER to register.
2
Press MENU to display the MENU screen, and
then press c/d to select “Option”.
3
Press a/b to select “Favorite CH”, and then
press ENTER.
4
Press a/b to select “Register”, and then
press ENTER.
5
Press a/b/ c/d to select the position in the
category, and then press ENTER to register.
6
Press MENU to exit.
1
Repeat steps 2 and 3 in Using Favorite CH
on the menu screen.
2
Press a/b to select “1 Data Clear”, and then
press ENTER.
A
B
Using Favorite CH on the menu screen
You can also set your favorite channels in “Option” on
the MENU screen.
C
D
Air
3
Deleting a favorite channel
1
Press FAVORITE and the favorite channel
screen displays.
2
Press a/b to select “1 Data Clear”, and then
press ENTER.
• To delete all the favorite channels, select “All Data
Clear”, and then skip to step 4.
3
• To delete all the favorite channels, select “All Data
Clear”, and then skip to step 4.
Press a/b/c/d to select the channel you
want to delete, and then press ENTER.
A
B
Air
Air
3
18
C
3
Press a/b/ c/d to select the channel you
want to delete, and then press ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
5
Press MENU to exit.
D
Air
10.1
4
Press c/d to select “Yes”, and then press
ENTER.
Yes
A
No
B
C
Air
3
Air
10.1
46
D
Basic adjustment settings
PPV TV
NORMAL TV
Picture adjustments
Adjusts the picture to your preference with the
following picture settings.
1
Press MENU to display the MENU screen, and
then press c/d to select “Picture”.
2
Press a/b to select a specific adjustment
item.
3
4
Press c/d to adjust the item to the desired
level.
Selected item
Picture
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Color
For less color
intensity
For more color
intensity
Tint
Skin tones become
reddish
Skin tones become
greenish
Sharpness
For less sharpness
For more sharpness
NOTE
• Select “Advanced” and then press ENTER to set “Color
Temp.”, “Black”, “I/P Setting”, “Film Mode”, “3D-Y/C”,
“Monochrome” or “Range of OPC”. See page 48.
OPC
Off
On
Automatically adjusts the brightness of the screen.
1
Press MENU to display the MENU screen, and
then press c/d to select “Picture”.
2
Press a/b to select “OPC”.
3
Press c/d to select “On” or “On: Display”.
[b12] a16
b16
Contrast
[b30]
0
b40
Brightness [
0] a30
b30
Color
[
0] a30
b30
Tint
[
0] a30
b30
Sharpness [ b2] a10
b10
Reset
Description
Off
The brightness is fixed at the value set
in “Backlight”.
On
Automatically adjusts
On: Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On : Display
Backlight
Advanced
PPV TV
NORMAL TV
OPC setting
Selected item
Audio
dbutton
Backlight
Press MENU to exit.
NOTE
• For resetting all Picture adjustment items to the factory
preset values, press a/b to select “Reset”, press ENTER,
press c/d to select “Yes”, and then press ENTER.
cbutton
4
Press MENU to exit.
NOTE
• When set to “On”, the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to “On: Display”, OPC effect displays on the
screen while the OPC adjusts the screen brightness.
47
Basic adjustment settings
Advanced picture adjustments
PPV TV
NORMAL TV
This TV provides various advanced functions for
optimizing the picture quality.
1
Press MENU to display the MENU screen, and
then press c/d to select “Picture”.
2
Press a/b to select “Advanced”, and then
press ENTER.
3
Press a/b to select a specific adjustment
item, and then press ENTER.
• You can select “Color Temp.”, “Black”, “I/P
Setting”, “Film Mode”, “3D-Y/C”, “Monochrome”,
or “Range of OPC”.
4
Press a/b (or c/d) to select the desired
parameter.
• See the table for the selectable parameters.
5
Press MENU to exit.
PPV TV
NORMAL TV
For a better white balance, use color temperature
correction.
High
Mid-High
Middle
Mid-Low
Low
PPV TV
NORMAL TV
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Selected item
Description
On
Detects, analyzes, converts film source
Off
Normal viewing mode
NOTE
• “Film Mode” does not function when you set:
— the “AV Mode” to “Game” or
— the “I/P Setting” to “Fast”.
PPV TV
NORMAL TV
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Color Temperature
Selected item
Film Mode (3:2 pull-down)
Description
Slow
For still images
Standard
Normal adjustment
Fast
For moving images
Off (2D)
For Game Mode
Description
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
White with Bluish tone
PPV TV
NORMAL TV
Monochrome
White with Reddish tone
For viewing a video in monochrome.
PPV TV
NORMAL TV
Black
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Selected item
For high detail in black portions
Off
No adjustment
PPV TV
NORMAL TV
Converts input signals depending on the type of
images.
On
For viewing in monochrome
Off
Normal color
Description
Fast
Suitable for fast-moving images
Slow
Suitable for smooth images with low
amounts of flickers
NOTE
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080I.
48
PPV TV
NORMAL TV
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e16 and a minimum of
f16.
Selected item
Selected item
Description
Description
On
I/P Setting
Selected item
Description
Max.
f15 through e16
Min.
f16 through e15
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Basic adjustment settings
Sound adjustment
PPV TV
NORMAL TV
You can adjust the sound quality to your preference
with the following settings.
PPV TV
NORMAL TV
Surround
Surround function allows you to enjoy realistic “live”
sound.
1
Press MENU to display the MENU screen, and
then press c/d to select “Audio”.
2
Press a/b to select “Surround”, and then
press ENTER.
Audio
1
Press MENU to display the MENU screen, and
then press c/d to select “Audio”.
Audio
Power Control
Power Control
Treble
[ 0]
a15
b15
Bass
[ 0]
a15
b15
Balance
[ 0]
L
Surround
R
[Off]
Reset
Treble
[ 0]
a15
b15
Bass
[ 0]
a15
b15
Balance
[ 0]
L
Surround
3
Press c/d to select “On”, and then press
ENTER.
4
Press MENU to exit.
R
[Off]
Reset
2
Press a/b to select a specific adjustment
item.
3
Press c/d to adjust the item to the desired
level.
Selected item
cbutton
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
4
NOTE
• You can choose Surround by pressing SURROUND on
the remote control unit. (See page 38.)
• Audio menu is grayed out when Output Select is set to
“Variable”.
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
Press MENU to exit.
NOTE
• Audio menu is grayed out when Output Select is set to
“Variable”.
• For resetting all Audio adjustment items to the factory
preset values, press a/b to select “Reset”, press ENTER,
press c/d to select “Yes”, and then press ENTER.
49
Basic adjustment settings
Power Control
PPV TV
NORMAL TV
Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.
1
Press MENU to display the MENU screen, and
then press c/d to select “Power Control”.
2
Press a/b to select “No Signal Off”, and then
press ENTER.
3
Press c/d to select “Enable”, and then press
ENTER.
Enable
Disable
This setting allows you to optimize the settings of
Digital broadcasting.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
1
Press MENU to display the MENU screen, and
then press c/d to select “Digital Setup”.
2
Press a/b to select “Audio Setup”, and then
press ENTER.
3
Press a/b to select “PCM” or “Dolby Digital”,
and then press ENTER.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU to display the MENU screen, and
then press c/d to select “Power Control”.
2
Press a/b to select “No Operation Off”, and
then press ENTER.
3
Press c/d to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
4
Press MENU to exit.
NOTE
• “Disable” is the factory preset value.
50
PCM
Press MENU to exit.
NOTE
• “Disable” is the factory preset value.
• When a TV program finishes, this function may not operate.
PPV TV
NORMAL TV
Audio Setup
• Five minutes before the power shuts down, the
remaining time displays every minute.
4
PPV TV
NORMAL TV
Digital Setup
Dolby Digital
Selected item
Description
PCM
The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select “PCM”.
Dolby Digital
The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.
4
Press MENU to exit.
Using external equipment
Displaying an external
equipment image
PPV TV
NORMAL TV
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
Input Select
NORMAL TV
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2 (LC-42HT3U
only), you may need to change the input signal type
setting on the “Input Select” menu.
1
Press MENU to display the MENU screen, and
then press c/d to select “Option”.
2
Press a/b to select “Input Select”, and then
press ENTER.
3
Press a/b to select the signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
4
1
Press INPUT.
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
Press MENU to exit.
• The setting is stored and can be selected on the
“INPUT SOURCE” menu.
NOTE
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 (LC-42HT3U only) to Auto, the TV
will automatically select the input signal.
• Setting INPUT 1 or 2 (LC-42HT3U only) signal selection to
“Auto” when other equipment is connected will result in the
following connection priority.
INPUT 1 or 2 (LC-42HT3U only):
1 COMPONENT VIDEO
2 VIDEO
INPUT4
INPUT5
INPUT6
2
Press INPUT again to select the input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
a/b.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 33 and 34 for external equipment connection.
51
Using external equipment
Displaying an image from
HDMI equipment
1
PPV TV
NORMAL TV
To watch an HDMI/PC-IN equipment image,
select “INPUT4” or “INPUT5” from “INPUT
SOURCE” menu using INPUT on the remote
control unit or on the TV.
INPUT SOURCE
PPV TV
NORMAL TV
Input Skip
This setting allows you to skip the HDMI/PC-IN Input
on the Input Selection operation.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Input Skip”, and then
press ENTER.
3
Press a/b to select the Input (INPUT 4,
INPUT 5 or INPUT 6) you wish to skip, and
then press ENTER.
TV
INPUT1
INPUT2
INPUT3
Input 4 (HDMI)
Input 5 (HDMI)
INPUT4
Input 6 (RGB)
INPUT5
Yes
INPUT6
2
Press MENU to display the MENU screen, and
then press c/d to select “Option”.
3
Press a/b to select “HDMI Setup”, and then
press ENTER.
Audio Only
Digital Noise Reduction
[Low]
HDMI Setup
Output Select
[Fixed]
4
Press a/b to select the desired item, and
then press ENTER.
5
Press c/d to select the desired setting, and
then press ENTER.
HDMI
Setup
items
Selectable
items
Description
Auto View
Enable
Disable
Set whether or not to
use View Mode based
on signal recognition,
including an HDMI signal.
Audio
Select
Digital
Analog
Select “Digital” for an
audio signal via the HDMI
terminal. Select “Analog”
for an audio signal via the
R-AUDIO -L terminal.
6
Press MENU to exit.
NOTE
• Refer to your external equipment operation manual for the
signal type.
• “Audio Select” is only available for INPUT 5.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
52
No
4
Press c/d to select “Yes”, and then press
ENTER.
5
Press MENU to exit.
Useful adjustment settings
Auto Sync. adjustment (for
Analog PC input mode only)
PPV TV
NORMAL TV
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Auto Sync.”, and then
press ENTER.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Fine Sync.”, and then
press ENTER.
3
Press a/b to select the specific adjustment
item.
Press c/d to select “Yes”, and then press
ENTER.
• Auto Sync. starts and “Now adjusting the image.”
displays.
Yes
PPV TV
NORMAL TV
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
For automatically adjusting the PC image.
3
Fine Sync. adjustment
H-Pos.
[ 90]
a
b
V-Pos.
[ 39]
a
b
Clock
[ 90]
a
b
Phase
[ 20]
a
b
Reset
Selected item
Description
H-Pos.
Centers the image by moving it to the
left or right.
V-Pos.
Centers the image by moving it up or
down.
Clock
Adjust when the image flickers with
vertical stripes.
Phase
Adjust when characters have low
contrast or when the image flickers.
No
4
Press c/d to adjust the item to your desired
position.
5
Press MENU to exit.
30%
4
Press MENU to exit.
NOTE
• When Auto Sync. is successful, “Completed” displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if “Completed” displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
NOTE
• For resetting all Fine Sync. adjustment items to the factory
preset values, press a/b to select “Reset”, and then
press ENTER.
• It is not necessary to adjust the “Clock” or “Phase” when a
digital signal is being input, so it cannot be selected.
53
Useful adjustment settings
Language setting
PPV TV
NORMAL TV
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Reset
NORMAL TV
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Language”, and then
press ENTER.
2
Press a/b to select “Reset”, and then press
ENTER.
3
Press a/b to select the desired language
listed on the screen, and then press ENTER.
4
Press MENU to exit.
• If you already set the Secret No., input the 4-digit
secret number here. See page 62 for setting a
secret number.
• “Return to the factory preset values” displays on
the screen.
3
Image position
• “Now, TV will restart automatically. OK?” displays
on the screen.
PPV TV
NORMAL TV
For adjusting a picture's horizontal and vertical
position.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Position”, and then
press ENTER.
3
Press a/b to select “H-Pos.” or “V-Pos.”.
Press c/d to select “Yes”, and then press
ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
• “Now initializing...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Example
Now initializing...
H-Pos.
[ 0]
a10
b10
V-Pos.
[ 0]
a20
b20
Reset
Selected item
Description
H-Pos.
Centers the image by moving it to the
left or right.
V-Pos.
Centers the image by moving it up or
down.
4
Press c/d to adjust the item to the desired
position.
5
Press MENU to exit.
NOTE
• For resetting adjustments to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• Adjustments are stored separately according to input
source.
54
NOTE
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
Useful adjustment settings
PPV TV
NORMAL TV
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
PPV TV
NORMAL TV
Sleep Timer
For LODGENET and nSTREAMS users, set the
Sleep Timer from the Function menu.
Allows you to set a time when the TV automatically
switches to standby.
1
1
Press INPUT to select the desired input
source.
2
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
3
Press a/b to select “Input Label”, and then
press ENTER.
4
Press a/b/c/d to select the new name for
the input mode, and then press ENTER.
Example
INPUT SOURCE
Press SLEEP.
• The remaining time displays when the sleep timer
has been set.
Sleep Timer: Remaining
2
30
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
Off
30
120
60
90
TV
DVD
INPUT2
INPUT3
INPUT4
NOTE
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
INPUT5
INPUT6
5
Press MENU to exit.
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
55
Useful adjustment settings
View Mode for 4:3 Programs
PPV TV
NORMAL TV
View Mode for HD Programs
PPV TV
NORMAL TV
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
1
Press VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options selectable
for the type of video signal currently being
received.
Example
View Mode
Side Bar
S. Stretch
Zoom
Stretch
2
Press VIEW MODE or a/b while the View
Mode menu is displayed to select a desired
item on the menu.
• You can sequentially select a View Mode that has
its own aspect ratio.
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
56
Useful adjustment settings
PPV TV
NORMAL TV
View Mode (for PC input mode)
You can select the screen size.
NOTE
• Connect the PC before making adjustments. (See page
34.)
• Selectable screen size may vary with input signal type.
1
Press VIEW MODE.
• The View Mode menu displays.
Example
View Mode
Normal
Zoom
Stretch
Dot by Dot
2
Press VIEW MODE or a/b while the View
Mode menu is displayed to select a desired
item on the menu.
Example: Screen size images
Input signal
4:3
Input signal
16:9
Normal
Keeps the original
aspect ratio in a full
screen display.
Zoom
Stretch
For viewing wideAn image fully fills the
screen programs. The screen.
top and bottom of the
image is cropped.
Stretch
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same
number of pixels on
the screen.
Dot by Dot
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image
with the same
number of pixels on
the screen.
57
Useful adjustment settings
Advanced Option settings
Output Select
Perform the following steps to set the Option menu
items on this page.
1
Press MENU to display the MENU screen, and
then press c/d to select “Option”.
2
Press a/b to select a specific adjustment
item, and then press ENTER.
3
Press a/b (or c/d) to select the desired
setting, and then press ENTER.
4
Press MENU to exit.
Allows you to select what controls the audio output.
Selected item
Description
Fixed
• Sound via speaker is adjusted with
VOL k/l on the remote control
unit or VOLl/k on the TV.
• Sound via the AUDIO OUTPUT
terminal is not adjustable and
outputs at a consistent level.
Variable
• Sound via the AUDIO OUTPUT
terminal is adjusted with VOL k/l
on the remote control unit or VOL
l/k on the TV.
• Sound via speaker is muted.
PPV TV
NORMAL TV
Color System
Select the video signal system compatible with your
equipment from the list below;
— Auto
— NTSC
— PAL-M
— PAL-N
• Skip this step for “Audio Only”.
Audio Only
NORMAL TV
When listening to music from a music program, you
can set the screen off and enjoy audio only.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are
output.
NOTE
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
PPV TV
NORMAL TV
Digital Noise Reduction
Produces a clearer video image.
Selected item
Description
On
No adjustment
High
For enhanced Digital Noise Reduction
Low
For moderate Digital Noise Reduction
58
NORMAL TV
NOTE
• “Color System” can only be set for INPUT 1 VIDEO and
INPUT 2. (LC-32HT3U/LC-37HT3U)
“Color System” can only be set for INPUT 1 VIDEO, INPUT
2 VIDEO and INPUT 3. (LC-42HT3U)
• If you already set the Secret No., input the 4-digit secret
number here. See page 62 for setting a secret number.
Program Title Display
NORMAL TV
Select the CH display when changing channels for
digital broadcasting.
Selected item
Description
Yes
“Program Info.” displays
No
“Program Info.” does not display
Useful adjustment settings
PPV TV
NORMAL TV
AV MODE
AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
1
Press AV MODE.
2
Press AV MODE again before the mode
displayed on the screen disappears.
Selected item
STANDARD
For a highly defined image in a normal
lighting
[Enhanced Picture Contrast: on]
MOVIE
For a movie
[Enhanced Picture Contrast: off]
GAME
Lowers image brightness for easier
viewing
[Enhanced Picture Contrast: off]
PC
For PC
[Enhanced Picture Contrast: off]
USER
Allows the user to customize settings
as desired. You can set the mode for
each input source.
[Enhanced Picture Contrast: off]
DYNAMIC
(Fixed)
Changes the image and sound
settings to the factory preset values.
No adjustments are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC
For a clear-cut image emphasizing
high contrast, useful for sports viewing
[Enhanced Picture Contrast: on]
• Current AV MODE displays.
• The mode changes as shown below.
When the input source is TV, INPUT 1, 2 or 3 terminals
(Example)
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: DYNAMIC
AV MODE: GAME
AV MODE: DYNAMIC (Fixed)
Input Signal (for Analog
PC input mode only)
AV MODE: USER [TV]
When the input source is INPUT 4, 5 or 6 terminals
(Example)
AV MODE: STANDARD
AV MODE: MOVIE
AV MODE: DYNAMIC
AV MODE: GAME
AV MODE: DYNAMIC (Fixed)
AV MODE: PC
AV MODE: USER [
Description
PPV TV
NORMAL TV
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024g768
1360g768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Input Signal”, and then
press ENTER.
3
Press a/b to select the desired input signal
on the display.
4
Press MENU to exit.
]
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
• “Enhanced Picture Contrast” technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
59
Useful adjustment settings
Closed Captions and
Digital Closed Captions
PPV TV
NORMAL TV
For LODGENET and nSTREAMS users, set the
Closed Captions from the Function menu.
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Not all programs and VHS videotapes offer closed
captions. Please look for the “N” symbol to ensure
that captions will be shown.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The “CC1” and “CC2” services display
subtitles of TV programs superimposed over the
program's picture.
In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
1
Press CC.
2
Press CC while the Closed Caption information
is still on the screen.
• This will present the Closed Caption information
display.
• Press repeatedly until you select the desired
closed caption service.
Air
ANALOG
2
Audio
CC
:
:
MONO
1/2 CC1
Closed Caption
information
• Depending on the number of caption services in
the signal being received, you will see information
such as 1/2 or 1/4 displayed.
1/2 means “the first of two services”.
Example:
If a program has three services (Digital CC(ENG),
CC1 and Text1), the closed caption display will
toggle in this sequence:
1/3 ENG
2/3 CC1
3/3 Text1
Off
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or
on another channel, the closed caption service
that is available is automatically selected, and this
service appears in parentheses, e.g. “1/3(CC1)”.
Closed Caption services that appear in
parentheses will not be stored in the CC button's
memory as your last selected service. Only
services that you have selected with the CC
button are stored.
Examples:
In a case where there are two closed caption
services provided, (for instance, Digital
CC(ENG) and CC1), and Digital CC(ENG)
is displayed as your current selection, if
Digital CC(ENG) is not broadcast for the next
program, the other closed caption service,
CC1, will be displayed in parentheses.
A closed caption service appears in
parentheses because the service you selected
is not available and a different service is
displayed on your screen. “1/1(CC1)” is
displayed instead of “1/2/ENG”.
NOTE
• See page 61 for detailed closed caption settings.
• When the program contains no closed caption, “--”
displays in the closed caption information.
• If the language code, e.g. “ENG”, is not found on Digital TV
programs, “--” will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may contain
none or only some of these services at the discretion of the
program provider.
60
Useful adjustment settings
PPV TV
NORMAL TV
Caption Setup
This function allows you to adjust the closed caption
screen appearance to suit your preference.
1
Press MENU to display the MENU screen, and
then press c/d to select “Option”.
2
Press a/b to select “Caption Setup”, and
then press ENTER.
3
Press a/b to select a specific adjustment
item.
NOTE
• For resetting adjustments to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• The default value depends on the broadcasting station.
Selectable items available for “Font Style”.
Selected item
Description
Default
The font specified by broadcasting
station or default font.
Type 0
Proportional font used in the MENU
screen.
Type 1
Monospaced with serifs.
Type 2
Proportionally spaced with serifs.
Type 3
Monospaced without serifs.
Type 4
Proportionally spaced without serifs.
Type 5
Casual font type.
Type 6
Cursive font type.
Type 7
Small capitals.
• You can adjust 7 items here; they are,
1
2
3
4
5
6
7
“Caption Size”,
“Font Style”,
“Foreground Color”,
“Foreground Opacity”,
“Background Color”,
“Background Opacity” and
“Character Edge”.
ABC
123
Caption Size
Default
Font Style
Default
Foreground Color
Default
Foreground Opacity
Default
Background Color
Default
Background Opacity
Default
Character Edge
Default
Reset
4
Press c/d to select the desired parameter.
5
Press MENU to exit.
61
Useful adjustment settings
Secret number setting
for parental control
(AV input mode only)
5
PPV TV
NORMAL TV
Input the same 4-digit number on the
“Reconfirm” screen as in step 4 to confirm.
New Secret No.
Secret No. Clear
Input Secret No.
PPV TV mode:
Parental CTRL is only for LODGENET and
nSTREAMS users. For ONCOMMAND, NXTV,
SeaChange and some LODGENET and
nSTREAMS (depending on the system you
have) users, the hotel server controls the
setting.
For LODGENET and nSTREAMS users,
use SELECT on the remote control unit of
LODGENET and nSTREAMS instead of ENTER
in the following operations.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 62 to 67):
1 Secret No. is registered.
2 V-Chip/V-Chip (DTV Only) settings have been
made.
3 “Status” is set to “On”.
Setting a secret number
1
Press MENU to display the MENU screen,
and then press c/d to select “Setup”.
2
Press a/b to select “Parental CTRL”, and
then press ENTER.
3
Press a/b to select “Secret No.”, and then
press ENTER.
a a a a
New Secret No.
* * * *
Reconfirm
a a a a
6
Press RETURN to start configuring the V-Chip
settings. (See pages 65 and 67 for details.)
7
Press MENU to exit.
Setting parental control status
Used to enable or disable the parental control function.
1
Repeat steps 1 and 2 in Setting a secret
number.
• The secret number setting menu displays.
2
Input the 4-digit secret number by using 0–9.
3
Press a/b to select “Status”, and then press
ENTER.
4
Press c/d to select “On” or “Off”, and then
press ENTER.
• Select “On” to enable and “Off” to disable Parental
CTRL.
V-Chip
V-Chip (DTV Only)
Secret No.
Status
V-Chip
On
Off
V-Chip (DTV Only)
Secret No.
Status
5
4
Select “New Secret No.”, and then press
ENTER.
Input the new 4-digit secret number by using
0–9.
New Secret No.
Secret No. Clear
62
Input Secret No.
a a a a
New Secret No.
a a a a
Reconfirm
a a a a
Press MENU to exit.
NOTE
• You can skip steps 1 and 2 above while in the Parental
CTRL screen.
• The “V-Chip (DTV Only)” will only be selectable when a new
rating system can be downloaded via digital broadcasting
in the U.S.
Useful adjustment settings
Changing the secret number
Allows you to change your current secret number.
Clearing the secret number
Allows you to clear your secret number.
1
Repeat steps 1 and 2 in Setting a secret
number.
• The secret number setting menu displays.
1
Repeat steps 1 and 2 in Setting a secret
number.
• The secret number setting menu displays.
2
3
2
Input the 4-digit secret number by using 0–9.
3
Press a/b to select “Secret No.”, and then
press ENTER.
4
Press a/b to select “Secret No. Clear”, and
then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
Input the 4-digit secret number by using 0–9.
Press a/b to select “Secret No.”, and then
press ENTER.
• Your secret number is cleared.
New Secret No.
4
Press a/b to select “New Secret No.”, and
then press ENTER.
5
Input the old 4-digit secret number by using
0–9.
Secret No. Clear
Yes
No
New Secret No.
Secret No. Clear
6
Input Secret No.
a a a a
New Secret No.
a a a a
Reconfirm
a a a a
Input the new 4-digit secret number by using
0–9.
New Secret No.
Secret No. Clear
7
Input Secret No.
a a a a
New Secret No.
a a a a
Reconfirm
a a a a
6
Press MENU to exit.
NOTE
• See page 62 for re-registering a new secret number after
being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to “Off”. “V-Chip” and “Status” will not
be selectable from the menu.
Input the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
New Secret No.
Secret No. Clear
Input Secret No.
8
a a a a
New Secret No.
* * * *
Reconfirm
a a a a
Press MENU to exit.
63
Useful adjustment settings
Parental control (setting V-CHIP level)
PPV TV
NORMAL TV
V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over
broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while
blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV.
“V-Chip” and “Status” will not be selectable from the menu if you do not first configure your secret
number. (See page 62 for Secret number setting for parental control.)
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.
Voluntary movie rating system (MPAA)
Rating
Age
Description
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children under 13.
R
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
jurisdictions).
NC-17
No one 17 and under admitted.
X
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
MPAA
TV Guidelines
G
Can. English Ratings
PG
Can. French Ratings
PG-13
R
NC-17
a
• If you select “PG-13”, this will automatically block the higher
ratings “R”, “NC-17” and “X”.
NOTE
• Voluntary movie rating system only uses an age-based rating.
X
NONE
TV Parental Guidelines
Content
FV
(Fantasy
violence)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
D
(Sexually
suggestive
dialog)
TV-Y (All children)
z
z
z
z
z
TV-Y7 (Directed to older children)
g
z
z
z
z
TV-G (General audience)
z
z
z
z
TV-PG (Parental Guidance suggested)
g
g
g
g
TV-14 (Parents strongly cautioned)
g
g
g
g
TV-MA (Mature audience only)
g
g
g
Rating
Suggested
age
z: The content rating can be set, but this rating is not normally broadcast by TV stations.
g: Content rating can be set.
64
Useful adjustment settings
Voluntary movie rating system (MPAA)
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Parental CTRL”, and
then press ENTER.
TV Parental Guidelines (TV Guidelines)
1
Repeat steps 1 to 4 in Voluntary movie
rating system (MPAA).
2
Press a/b to select “TV Guidelines”, and
then press ENTER.
3
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
Example
MPAA
• The secret number setting menu displays only
when “Secret No.” is set. (See page 62.)
• “V-Chip” and “Status” will not be selectable from
the menu if you do not first configure your secret
number. (See page 62.)
3
Input the 4-digit secret number by using 0–9.
4
Press a/b to select “V-Chip”, and then press
ENTER.
TV Guidelines
TV-Y
Can. English Ratings
TV-Y7
Can. French Ratings
TV-G
L
TV-PG
S
D
TV-14
V
TV-MA
FV
NONE
When setting an individual content-based
rating item, do as follows:
1 Press d or ENTER to access blocked
content items from the currently selected
age-based rating item.
2 Press a/b to select an individual item,
and then press ENTER to unblock it (“ ”
is removed). Repeat the same steps for the
other items.
3 Press c or RETURN to register after all
individual content rating items are set.
V-Chip
V-Chip (DTV Only)
Secret No.
Status
Example
5
6
Press a/b to select “MPAA”, and then press
ENTER.
MPAA
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
Press RETURN.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
Example
MPAA
TV Guidelines
G
Can. English Ratings
PG
Can. French Ratings
PG-13
TV Guidelines
TV-Y
Can. English Ratings
TV-Y7
Can. French Ratings
TV-G
L
TV-PG
S
D
TV-14
V
TV-MA
FV
NONE
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
4
Press MENU to exit.
R
NC-17
X
NONE
7
Press MENU to exit.
65
Useful adjustment settings
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into
consideration other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
Age
Description
E
Exempt: Includes news, sports, documentaries and other information programming; talk shows,
music videos, and variety programming.
C
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes
that could threaten their sense of security and well-being.
C8e
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only
way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on
the screen.
G
General: Considered acceptable for all age groups. Appropriate viewing for the entire family,
contains very little violence, physical, verbal or emotional.
PG
Parental Guidance: Intended for a general audience, but may not be suitable for younger children
(under the age of 8) because it could contain controversial themes or issues.
14e
Over 14 Years: Could contain themes where violence is one of the dominant elements of the
storyline, but it must be integral to the development of plot or character. Language usage could
be profane and nudity present within the context of the theme.
18e
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which
while related to the development of plot, character or themes, are intended for adult viewing.
Could contain graphic language and portrayals of sex and nudity.
Canadian French ratings
Rating
E
Exempt programming.
G
General: All ages and children, contains minimal direct violence, but may be integrated into the
plot in a humorous or unrealistic manner.
8anse
General but inadvisable for young children: May be viewed by a wide public audience, but could
contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real
situations. Recommended for viewing with parent.
13anse
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for
viewing with parent.
16anse
Over 16 years: Could contain frequent violent scenes and intense violence.
18anse
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.
Age
66
Description
Useful adjustment settings
Canadian English ratings
Canadian French ratings
1
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
2
Press a/b to select “Parental CTRL”, and
then press ENTER.
1
Repeat steps 1 to 4 in Canadian English
ratings.
2
Press a/b to select “Can. French Ratings”,
and then press ENTER.
3
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
Example
• Secret number setting menu displays only when
“Secret No.” is set. (See page 62.)
• “V-Chip” and “Status” will not be selectable from
the menu if you do not first configure your secret
number. (See page 62.)
3
MPAA
TV Guidelines
E
Can. English Ratings
G
Can. French Ratings
8ans+
13ans+
Input the 4-digit secret number by using 0–9.
16ans+
18ans+
Setup
Secret No.
4
Option
NONE
a a a a
Press a/b to select “V-Chip”, and then press
ENTER.
Press MENU to exit.
How to temporarily release the
PPV TV
V-CHIP BLOCK
NORMAL TV
V-Chip
V-Chip (DTV Only)
Secret No.
Status
When the V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays.
Press ENTER while the V-CHIP is working,
1 and then the secret number setting menu
displays.
5
Press a/b to select “Can. English Ratings”,
and then press ENTER.
6
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On”, the configuration
settings will not work. (See page 62.)
Example
MPAA
TV Guidelines
E
Can. English Ratings
C
Can. French Ratings
4
C8+
2
Input the 4-digit secret number by using
0–9. At this time V-CHIP BLOCK temporarily
releases.
Reactivating the temporarily
PPV TV
released V-CHIP BLOCK
NORMAL TV
You can reactivate the temporarily released V-CHIP
BLOCK as shown below
.
Method 1:
Select “Status” setting from the Parental CTRL menu
to reactivate BLOCK. (See page 62.)
G
PG
14+
18+
NONE
7
Press MENU to exit.
Method 2:
Select “V-Chip” setting (“MPAA”, “TV Guidelines”,
“Can. English Ratings” or “Can. French Ratings”)
from the Parental CTRL to reactivate BLOCK. (See
pages 65 and 67.)
Method 3:
Switch off the TV power.
NOTE
• Performing any of the three above will activate the V-CHIP
BLOCK.
67
Other viewing options
Freezing images
PPV TV
NORMAL TV
Allows you to capture and freeze a moving image that
you are watching.
1
Press FREEZE.
2
Press FREEZE again to cancel the function.
Presetting remote control function
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
• A moving image is captured.
NOTE
• When this function is not available, “No displaying still
image available.” will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHIP BLOCK message will appear.
Presetting manufacturer codes
1
Press FUNCTION until the LED for your
device lights up.
2
After the LED for your device lights up,
press FUNCTION and DISPLAY at the
same time to enter the code registration
mode. The LED will blink.
3
Press 0–9 to enter the manufacturer code.
(See page 69.)
• Preset mode is finished once the LED no
longer lights up.
4
68
After registering the code, the LED will stop
blinking then turn off after one second. (If
you perform an incorrect operation, the LED
will blink quickly then turn off.)
Other viewing options
Manufacturer codes
VCR BRAND
REMOTE CONTROL
CODE NUMBER
DVD/LD BRAND
REMOTE CONTROL
CODE NUMBER
CATV/SAT BRAND
REMOTE CONTROL
CODE NUMBER
NOTE
• Numbers marked with * are SAT codes, all others are
CATV codes.
AUDIO BRAND
REMOTE CONTROL
CODE NUMBER
69
Other viewing options
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable
converter connected to the TV can be operated using 1 to 4.
1
1
2
2
3
3
4
4
SOURCE POWER
Turns the cable converter power on and off.
0–9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
CH r/s
Press CHr or CHs to tune in a higher or lower
channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1
1
2
3
2
SOURCE POWER
Turns the cable converter power on and off.
0–9, • (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the
SAT GUIDE screen or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
3
70
Other viewing options
■ VCR control buttons
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to VCR.
8
• Press INPUT until the input connected to the VCR is selected. The following 1 to 8
can be used to control the VCR.
1
2
4
7
3
5
6
2
3
4
5
1
6
7
8
CH r/s
Press to select the channel of the TV tuner on the VCR.
SOURCE POWER
Turns the power of the VCR on and off.
F
Sets pauses and still pictures.
G
Rewinds the tape and allows picture search.
H
Stops the tape transport.
REC
Starts recording.
J
Rapidly advances the tape and allows picture search.
I
Starts playback.
■ DVD control buttons
The remote control unit button will function as follows when the FUNCTION
of the remote control unit is set to DVD.
• Press INPUT until the input connected to the DVD player is selected. The following
1 to 10 can be used to control the DVD player.
3
5
6
2
1
9
4
7
8
L
Pressing quickly once takes you to the start of the next chapter. Each
time you press it, you move ahead to the start of the next chapter.
2 K
Pressing quickly once takes you to the start of the chapter currently
playing. Each time you press it, you move back to the start of the
previous chapter.
3 SOURCE POWER
Turns the power of the DVD player on and off.
4 F
Sets pauses and still pictures.
5 G
Hold down to go in reverse.
6 H
Playback stops when pressed.
With some DVD players, pressing the button twice may open the disc tray.
7 MENU
When this button is pressed, the DVD menu will display.
8 ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DVD MENU screen.
9 J
Hold down to fast forward.
10 I
Starts playback.
1
10
71
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed TV POWER on the remote control unit. (See page 35.) If the
indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 16 of the operation manual for the LC32HT3U.)
• Has the power been turned on? (See page 35.)
• Depending on the Room Mode setting, you need to press MASTER or ROOM on the
Remote Replicator to turn on the TV. (See pages 11, 14, 18, 21 and 24.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after first turning on the power of the TV or unplugging the
AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
•
•
• Picture is cut off/with sidebar
screen.
• Is the image position correct? (See page 54.)
• Are screen mode adjustments such as picture size made correctly? (See pages 56 and
57.)
• Strange color, light color, or
color misalignment
• Adjust the picture tone. (See pages 47 to 48.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 59.)
• Power is suddenly turned off.
• Is the sleep timer set? (See page 55.)
• Check the power control settings. (See page 50.)
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No picture
•
•
•
•
•
•
• No sound
• Is the volume too low? (See page 38.)
• Is “Variable” selected in “Output Select”? (See page 58.)
• Have you pressed MUTE on the remote control unit? (See page 38.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect the TV’s performance.
Is the FUNCTION set correctly? Set it to the TV setting position.
Are batteries inserted with polarity (e, f) aligned? (See page 32.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control sensor?
The buttons on the remote control unit may not function depending on the Room Mode
setting. (See page 6.)
Is connection to other components correct? (See pages 33 and 34.)
Is correct input signal source selected after connection? (See page 51.)
Is the correct input selected? (See page 51.)
Is picture adjustment correct? (See pages 47 to 48.)
Is “On” selected in “Audio Only”? (See page 58.)
Is a non-compatible signal being input? (See page 34.)
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code
Possible Solution
• Failed to receive broadcast.
E202
• Check the antenna cable. Check that the antenna is correctly
setup.
• No broadcast now.
E203
• Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f4°F to e140°F (f20°C to e60°C)
72
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
1
Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2
Press a/b to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number
input screen displays.
Setup
Secret No.
3
Option
a a a a
Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the
screen.
The secret number is
.
NOTE
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
73
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
TINS-D140WJZZ
07P08-NA-WG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement