Samsung BN68-02585A-07 User manual

Samsung BN68-02585A-07 User manual
"U
Contact
SAMSUNG
Comment
contacter
<
or comments
Samsung
Si vous avez des suggestions
Samsung.
Comuniquese
=4
WORLDWIDE
if you have any questions
relating to Samsung
products,
please contact the SAMSUNG
customer
care center.
t=
darts le monde
ou des questions
concernant
les produits Samsung,
veuillez contacter
le Service Consommateurs
con SAIVISUNG WORLDWIDE
Si desea formular alguna pregunta
atencion al cliente de SAMSUNG.
o comentario
en relacion con los productos
de Samsung,
comuniquese
con el centro de
CANADA
1-800-SAMSUNG
(726-7864)
www.samsung.com
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A
I-8O0-SAMSUNG
(726-7864)
www.samsung.com
Samsung Electronics America, Inc. 85 Challenger
Road Ridgefield Park, NJ 07660-2112
imagine the possibilities
Thank you for purcnaslng this Samsung product.
To receive more complete service. E)leaseregister
your broduct at
www.samsun g.co m/register
Mode
Z
I
© 2010 Samsung
Electronics
Co., Ltd. All rights
reserved.
BN68-02585A-07
Serial No.
!
Figures and illustrations in this User Manual are provided for reference
Product design and specifications
may be changed without notice.
only and may differ from actual product
appearance.
|
J
_
See the warranty card for more information on warranty terms.
Wide screen format PDP Displays(16:9, the aspect ratio of the screen width to height) are pdmadly designed to view wide screen format full-motion video.
The images displayed on them should pdmadly be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
the images are constantly moving. Displayingstationary graphics and images on screen, such as the dark sidebars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displayingstationary images that exceed the above guidelines can cause uneven
aging of PDP Displaysthat leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and
primarilydisplay full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICSNORTH AMERICAN LIMITEDWARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service (}enter. Along with this Statement, the OriginalLimited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originallyspecified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, pleasecall toll-free:
- In the United States : 1-800-SAMSUNG (1-800-726-7864)
- In Canada : 1-800-SAMSUNG
•
•
•
•
•
•
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, refer to page 16 of this manual to reduce the degree of
brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma'rV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a"cracking" noise.
A "cracking" noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HDqevel) to 6,221,000(FHDqevel) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixeb on the screen. These pixeb will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°0)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.
•
•
After-images on the Screen.
Displayingstill images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the "brightness" and "contrast" when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered W the warranty.
English
Contents
•
List of Features .........................................................
4
•
Accessories ..............................................................
4
•
Connecting to a Wired Network
29
•
Installthe Stand ........................................................
5
Connecting to a Wireless Network
31
•
Viewing the Control Panel .........................................
6
•
Viewing the Remote Control ......................................
7
Connecting a USB Device
36
•
Connecting to an Antenna ........................................
8
Connecting to your PC through a network
36
•
Plug & Play (Initial Setup) ...........................................
8
Screen Display
38
Playing Multiple Files
41
Media Play - Additional Functions
41
•
•
•
Connecting to an AV Device......................................
•
Network Connection ...............................................
Media Play ..............................................................
Anynet+ ..................................................................
9
29
36
43
Setting Up Anynet+
44
Connecting to an Audio Device ............................... 11
Switching between Anynet+ Devices
44
•
Connecting to a PC ................................................
12
Recording
45
•
Changing the Input Source .....................................
13
Listening through a Receiver
45
Troubbshooting for Anynet+
46
•
•
•
•
•
•
[email protected] ............................................................
47
Getting Started with [email protected]
47
13
14
Setting up [email protected]
48
Using the [email protected]
50
Seeing Channels
14
PROFILEWidget
52
Using Favorite Channels
14
Widget Gallery
52
Memorizing Channels
14
Editing Channels
Other Features
15
15
How to Navigate Menus ..........................................
Channel Menu .......................................................
Picture Menu ..........................................................
Troubleshooting for [email protected]
AIIShare ..................................................................
16
53
54
About AlIShare
54
Setting Up AlIShare
54
Changing the Preset Picture Mode
16
Adjusting Picture Settings
Economical Solutions
16
Changing the Picture Options
17
•
Assembling the Cables ...........................................
56
Viewing TV using the 3D function
19
•
Installing theWall Mount .........................................
57
22
•
Securing the Installation Space ............................... 58
16
Setting up the TV with Your PC
Sound Menu ...........................................................
22
•
Securing the TV to the Wall .....................................
59
Changing the Preset Sound Mode
22
•
Troubleshooting ......................................................
60
Adjusting Sound Settings
22
Sound Settings
22
•
Storage and Maintenance
License ...................................................................
63
64
23
Setup Menu ............................................................
Setting the Time
23
•
,,
Specifications .........................................................
Dimensions .............................................................
64
65
Using the Sleep Timer
24
•
Index ......................................................................
66
Setting the On/ Off Timer
24
Locking Programs
Other Features
24
26
Picture in Picture (PIP)
27
Suppo_ Menu.........................................................
27
Check the Symbol!
®
Note
This function can be used by pressing tile
TOOLS button on the remote control.
Indicatesadditionalinformation.
Step by Step Guide
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3
Getting Started
•
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
•
Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 36).
•
[email protected]: You can use various internet services and view useful information and entertaining content (p. 47).
•
AllShare: AIIShare connects your TV and compatible Samsung mobile phones/devices through a network (p+54).
•
Self Diagnosis: You can check whether picture or sound operate normally (p+28).
•
3D: This exciting new feature enables you to view 3D content (p. 19).
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
•
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
A Maximum distance between the ferrite core and the end of the cord inserted in the
TV: 2 inches
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
i
English
•
Maximum thickness - 0+55 inches (14mm)
,
5EA (M4
(M4 X
X L10)
L12)
5EA
Follow the steps below to connect the TV to the stand. (50 inch model only)
Screws (M4 X L12) ...........
_ I' TT .............
::::::i
Guide Stand ............
Stand
i "_.y_ _f
_--_-'_::::.
Rear
_
1.
Top view
Fro it
..............
R_!.............
Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
i,,...-"s*.."-,.
Sorews/M4XU0/
.....(
_37÷.:
With your TV upright, connect the TV to the Stand.
3,
Fasten two screws (M4 X L10) at position _, and then
fasten three screws (M4 X L10) at position 0.
NOTE
* Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
* Make sure that at least two persons lift and move the PDP TV.
* Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Z_ Do not insert your fingers into the stand base slot of the TV when installing the stand base.
English
5
Getting Started
The product color and shape may vary depending on the model.
PowerIndicator
I
Speaker
_
_
SOURCED MENU - VOL+
v
CH A
Remotecontro sensor
Power indicator
Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor
Aim the remote control towards this spot on the TV.
SOURCE
Toggles between all the available input sources, In the on-screen menu, use this
eu_ton as you would use the ENTERIZ_ button on the remote control.
MENl
Displays an on-screen menu, the OSD (on screen display) of your TV's features.
--VOL+
Ad usts the volume. In the OSD, use the --VOL÷
anq _, buttons on the remote control.
VCHA
Changes the channels. In the OSD, use the V CH A buttons as you would use the
T anq A buttons on the remote control.
(b 'Powert
Turns the TV on or off.
buttons as you would use the
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
Thisisaspecial
remote
control
forthevisually
impaired
andhasBraille
points
onthePower,
Channel
andVolume
buttons.
Turns the TV on and off.
Displaysand selects tile availaMevideo
sources (p. 13).
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to ON will reduce the battery usage
time.)
Press to directly access channels.
Press to select addkional channels
(digkal)being broadcasted by the same
station. For example, to select channel
"54-3", press "54", then press "-" and
Returns to the previous channel
Cuts off the sound temporarily.
"3".
Changes channels.
Adjusts the volume.
Brings up the OSD.
Displays the channel list on the screen
(p. 14).
Disphys the Content View, which
includes Channel List, [email protected],
Media Play, AllShare and 3D.
Link to various internet services (p. 47).
Displaysinformation on the TV screen.
Quickly select frequently used functions.
Selects the on-screen menu items and
changes the values seen on the menu.
Returns to the previous menu.
Exits the menu.
Buttons used in the Channel List,
[email protected], Media Play menu, etc.
MEDIA,P: Displays Media Play (p. 36).
YAHOO!: Runs the Yahoo widget, (p.
51).
3D: Sets the 3D mode. (p. 20).
FAV,CH: Displays FavoriteChannel Lists
on the screen (p. 14).
RSlZE: Selects the picture size (p. 18).
CC: Controls the caption decoder (p.
26).
Use these buttons in Media Play and
Anynet+ modes (p. 36, 43).
([_: Controls recording for Samsung
recorders that have the Anynet+ feature)
installing batteries (Battery size: AAA)
NOTE
* Use the remote control within 23 feet from the TV,
* Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs,
* The color and shape may vary depending on the model.
English
7
Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
The PDP device may interfere with an amateur radio or AM radio.
VHF/UHFAntenna
Antenna Cable (Not Supplied)_
or
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER (b button. Plug & Play is available only when the input source is set to TV.
To return to the previous step, press the Red button.
Selecttng a language
Press tne A Dr T button, then press the ENTERE_ button.
Select the desired OSD (On Screen Display) language.
Selecting Store Demo
or Home Use
Press tne 4 Dr I_ button, then press the ENTERE_ button.
® Select the Home Use mode. Store Demo mode is for retail
environments.
•
Selecting an antenna
Selecting a cnannet
To return the unit's settings from Store Demo to Home Use
(stanaaral: Press the volume button on the T_. When you
see tne volume OSD, press and hold MENU for 5 sec.
Press tne A Dr T button, then press the ENTERI_%_button. Select Air, Cable or Auto.
Press tne A Dr T button, then press the ENTERE_ button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numencat vatues (channel frequencies) to the channels. For more information, refer to
Channel _ Auto Program (p. 14).
Press the ::NTFR _
SettHlg tne Clock
Mode
View the HD
Connection Guide
button at any time to interrupt the memorization process.
Set the Clock Mode automatical y or manually.
•
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
•
Manual: Allows you to manually set the current date and time (p. 23).
The connection method for the best HD screen quality is displayed.
Press the ENTERI_%_button.
Enjoy the TV.
if You Want to Reset This Feature...
(_
MENU rrrl _ Setup -_ Plug & Play _ ENTERI__
English
POWER
Connections
Using an HDMI or HDMI/DVI Cable: HD connection
(up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
HDM_ _NI(DV_), 2(ARO), 3, 4, PC/DW AUDIO _N
" For better picture and audio quality, connect to a digital device using an HDMI cable.
" An HDMI cable supports digital video and audio signals, and does not require an audio cable.
- To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
" The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
. Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
OCCUr,
" A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.
" This product supports the 3D and ARC (Audio Return Channel) functions via an HDMi cable. Note that the
ARC function is supported by the HDMI _N 2(ARC} port only.
- If 3D Auto View is set to On, some functions such as [email protected]
Auto View or 3D Mode to Off.
may be disabled. In this case, set 3D
* The ARC function allows digital audio to output via the HDM_ _N 2_ARC} port. It can be enabled only when the
TV is connected with an audio receiver that supports the ARC function.
English
9
Connections
Using a Component
(up to 1080p) or AudioNideo
(480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
H
Video Cable
(Not Suppbied)
(Not Suppbied)
When connecting to AV _N,the color of the AV _N [Y/VDEO] jack (green) will not match the video cable (yellow).
For better picture quality, the Component connection is recommended over the A/V connection,
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EXU NK: Connector for service only.
0
English
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
Audio Cable (Not Supplied)
Optica] Cable (Not Supplied)
DIGITAL AUDIO OUT (OPTICAL)
" When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL} jack, decrease the volume
of both the TV and the system.
. 5.1 OH (channel) audio is available when the TV is connected to an external device supporting 5.1 OH.
" When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5,1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 OH audio will be heard from the home theater receiver. If you want to
hear 5.1 OH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDIO OVT: Connects to the audio input jacks on your amplifier/DVD home theater.
* When connecting, use the appropriate connector.
* When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
ii
English
Connections
Using
an HDMI/DVI
cable
or a D-sub
cable
Audio CabLe(Not Supplied)
D-Sub Cable (Not Supplbd)
Display Modes (D-Sub and HDMI/DVl input)
Optimal resolution is 1920 X 1080 @ 60 Hz,
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024x 768
1152 x 864
1280 x 1024
1280 x 1024
1280x 720
1280x 800
1280x 800
1280x 960
1360 x 768
1440 x 900
1440x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
1920 x 1080p
67.500
60.000
148.500
+/+
VESA DMT/DTVCEA
NOTE
* For HDMI/DVI cable connection, you must use the HDM_ _N I(DV_)jack.
* The interlace mode is not supported.
* The set may operate abnormally if a non-standard video format is selected.
* Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
2
English
+/-/+
-/+
-/+
-/+
-/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
Edit Name
(_
MENUITTI --_ Input _ Edit Name _ ENTERI_
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVl PC / DVl
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is
connected to the NDM_ _N I(DW) port, you should set
the TV to DVl PC mode under Edit Name.
m
-iV / PC / AV / Component / HDMH/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
You can only choose external devices that
are connected to the TM In the Source List,
connected inputs will be highlighted.
When connecting an HDMI/DVI cable to the HDM_ IN
I(DW) port, you should set the TV to DVl PC or DVl
Devices mode under Edit Name.
In the Source List, PC is always activated.
Basic Features
How to Operate the OSD (On Screen Display)
Before using the TV,follow the steps below to learn how to
navigate the menu and select and adjust different functions.
MENU
The access step may differ depending on the selected menu.
....
:il;[:_
A / _'
Select an icon with the A or T
button,
ENTER E_
Press ENTER I_
@
to access the
sub-menu.
Select the desired submenu with
the A or T button.
O
O
MENU button: Displays the main on-screen menu,
ENTERE_ / Direction button: Move the cursor and
select an item. Confirm the setting.
ENTER E_
RETURN button: Returns to the previous menu.
O
EXIT button: Exits the on-screen menu.
_EX_T-,IJ
Press ENTER I_
selection.
to confirm the
Press EXIT.
English 13
Basic Features
Using Favorite Channels
Seeing Channels
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
(_
MENUrlTI _ Channel --_ Channel List
ENTERI_
(_
MENUITTI --_Channel _ Channel List _ ENTERI_
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1.
Select a channel and press the TOOLS button.
2.
Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by
pressing the A / T and ENTERI_ buttons. Then you can
watch the selected channel.
To show all Favorite channels, click on the
button shown on the right.
Ill
{_All
Channels: Shows all currently available channels.
Ill
_Added
Ill
_
Ill
_ Programmed: Shows all currently reserved
programs.
Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Memorizing Channels
(_
MENUITTI --_Channel _ ENTERI_
Using the color buttons with the Channel List
" QRed (Antenna): Switches to Air or Cable.
" C_Green (Zoom): Enlarges or shrinks a channel
number.
" Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
_/ mark appears to the left of the selected channels.
" 0 (Page): Move to next or previous page.
" _-_ (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
4
_/
A channel selected.
V
A channel set as a Favorite.
(_)
A reserved Program.
English
Antenna
(Air / Cable) _
...........................................
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program .......................................................................
Ill
Air: Air antenna signal.
Ill
Cable: Cable antenna signal.
Ill
Auto: Air and Cable antenna,
NOTE
When
selecting
theCable
TVsystem:
STD,
HRC
andIRCidentify
various
types
ofcable
TVsystems.
Contact
your
local
cable
company
toidentify
the
typeofcable
system
thatexists
inyour
particular
area.
Atthispoint,
thesignal
source
hasbeen
selected.
After
alltheavailable
channels
arestored,
itstarts
toremove
scrambled
channels.
The
AutoProgram
menu
then
reappears.
NOTE
* All deleted channels will be shown on the All
Channels menu.
* A gray-colored channel indicates the channel
has been deleted.
* The Add menu only appears for deleted
channels.
* Delete a channel from the Added Channels or
Favorite menu in the same manner.
m
Editing Channels
MENUiTrl _ Channel --_ Channel List --_ ENTERI_
Channel Name Edit
1.
Select a channel and press the TOOLS button.
2.
Edit the channel name using the Channel Name Edit
menu.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1.
Press the _ / _, / A / _ buttons to select the
desired channel in Channel List.
2.
Press the TOOLS button, then select Timer
Viewing,
3.
Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
ml Channel Name Edit (analog channels only): Assign your
own channel name.
If you selected Once, Every Week or EveryDay
in Repeat you can enter the date you want.
4.
Other Features
Select OK, then _ress the ENTERI_
done.
button when
NOTE
MENUiTrl _ Channel --_ ENTERI_
* Only memorized channels can be reserved.
Clear Scrambled
* Reserved programs will be displayed in the
Programmed menu.
Channel
This function is used to filter out scrambled channels after
* When a digital channel is selected, press the _,
button to view the digital program.
Auto Program is completed. This process may take up to
20-30 minutes.
m
Select All: Select all the channels in the channel list.
How to Stop Searching Scrambled Channels
m
Deselect All: Deselect all the selected channels.
1.
Press the ENTERI_
2.
Press the _ button to select Yes.
3.
Press the ENTERI_
You can only select Deselect All when one or
more channels are selected.
button to select Stop.
button.
This function is only available in Cable mode.
@ Programmed
(in Channel List)
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All/Deselect
All). Option
menu items may differ depending on the channel status.
1.
Select a channel and press the TOOLS button.
2.
Select a function and change its settings.
ml Add / Delete: Delete or add a channel to display the
channels you want.
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
Options.
m
Change Info: Change a show you have reserved to
watch. Begin with step 3 of "Timer Viewing" above.
m
Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s).
English 15
Basic Features
m
information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTERIZ_ button.
Select All / Deselect All: Select or deselect all reserved
m
programs.
Adjusting Picture Settings
(_
MENUrlTI _ Picture _ ENTERI_
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G!R) .........................................
Your television has several setting options for picture quality
control.
Fine Tune
NOTE
(analog channels only)
* When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
if the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation, if the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
* In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
* Settings can be adjusted and stored for each
external device connected to the TV.
Settings are applied to the channel you're currently
watching,
Economical Solutions
Fine tuned channels that have been saved are marked
with an asterisk .....on the right-hand side of the
channel number in the channel banner.
The Eco Function can be used to enhance your power
savings.
To reset the fine-tuning, select Reset.
ECO Solution .........................................................................
Changing the Preset Picture Mode
(_
(_
MENU rlTl _ Picture _ Eco Solution _ ENTERI_
Ill
Energy Saving (Off / Low / Medium / High / Picture
Off): This adjusts the brightness of the TV in order to
reduce power consumption. If you select Picture Off,
the screen is turned off, but the sound remains on.
Press any button except the volume button to turn on
the screen. Until the screen turns on again, a distorted
picture will be displayed for about 4 seconds.
Ill
Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
MENUiTrl _ Picture -_ Mode -_ ENTERE_
Mode
Select your preferred picture type.
Ill
Dynamic: Suitable for a bright room.
Ill
Standard: Suitable for a normal environment.
Ill
Relax: Suitable for reducing eye strain.
Relax is not available in PC mode.
Ill
Movie: Suitable for watching movies in a dark room.
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
Ill
No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
6
English
Changing the Picture Options
Advanced
(_
Settings
[]
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
[]
Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom,
[]
White Balance: Adjust the color temperature for a more
natural picture.
MENU rlTI _ Picture --_ Advanced Settings
ENTER C_
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
[]
10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
Available when the picture mode is set to Movie
and when the external input is set to all input.
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
m
Green: Adjust the green level.
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
m
Dynamic Contrast (Off/Low/Medium
the screen contrast.
m
Gamma: Adjust the primary color intensity.
m
Expert Pattern (Off / Pattern1 / Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
/ High): Adjust
Off: Turns the Expert Pattern function off.
Pattern1 : This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
[]
Flesh Tone: Emphasize pink"Flesh Tone."
[]
Edge Enhancement
boundaries.
[]
xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
(Off / On): Emphasize object
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
While the Expert Pattern is running, sound is not
output.
Only enabled in DTV, Component and HDMI
modes.
English 17
Basic Features
Picture Options
NOTE
(_
" When Double (_Jl, iiq) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
MENU iTR _ Picture _ Picture Options
ENTER [_
" After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the I_ button to select Position.
In PC mode, you can only make changes to the Color
Tone, Size and Screen Burn Protection,
2.
Press the ENTERE_ button.
3.
Press the A or T button to move the picture up
or down.
4.
Press the ENTERE_ button.
5.
Press the I_ button to select Reset.
6.
Press the ENTERC_ button to reset the picture
to its default position.
" After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ,_ or I_ button to select Position.
2.
Press the ENTERI_
Color Tone (Cool / Normal / Warm1 / Warm2)
3.
Press the A, _r, ,_ or I_ button to move the
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
4.
Press the ENTERE__ button.
5.
Press the ,_ or I_ button to select Reset,
6.
Press the ENTERI_
Ill
button,
picture.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Ill
button,
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
. HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
However, we highly recommend you use
16:9 mode most of the time.
" Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
ATV,AV,
16:9, Zoom1,
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Component (480i, 480p)
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
16:9, 4:3, Wide Fit,
Screen Fit
HDMI (720p, 1080i, 1080p)
PC
16:9, 4:3
Available with HD 1080i / 720p signal in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode,
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Ill
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i/1080p) or Component
(1080i / 1080p) signals are inputted.
Digital Noise Filter (Off / Low / Medium / High / Auto
/Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
Ill
8
English
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
Ill HDMI
Black
Level
(Normal
/ Low):
Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
Ill
(_
Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, OOMPONENT (480i/1080i)
and HDMI (480i/1080i).
Ill
Viewing TV using the 3D function
MENUiTrl --_ Picture _ 3D _ ENTERE_
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES,
Read and understand the following safety information
before using the TV's 3D function.
Z_XWARNING
Screen Burn Protection: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
" Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and
rest.
Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after-images on the screen.
Optimum condition for pixel shift
* Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses and
rest.
Horizontal
Vertical
0~4
0~4
4
4
Time(minute)
1~4 rain.
4 rain.
The Pixel Shift value may differ depending on the
monitor size (inches) and mode.
This function is not available in the Screen Fit
mode.
Auto Protection Time (10 rain. / 20 rain. / 40 rain. / 1
hour / Off): Set the time the screen remains idle with a
still image until the screen saver is activated. The screen
saver prevents the formation of ghost images on the
screen.
* A responsible adult should frequently check on
children who are using the 3D function. If there are
any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
* Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
* Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around
may result in injuries due to running into objects,
tripping, and/or falling.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
Press any key on the remote control to cancel this
feature.
Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
English 19
Basic Features
3D
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
This exciting new feature enables you to view
3D content. In order to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you purchased this T_.
PC and the PC is connected through an HDMI/
DVI cable.
"Frame Sequential" displays the frequency (60Hz
only) when the resolution is set to PC.
m
_I
The LED on the 3D emitter blinks only when sending a
3D signal.
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
Ill
This function is deactivated when 3D Mode set to
"2D -_ 3D" or Off.
SAMSUNG
3D emitter
m
3D View point: The overall adjustment of 3D
perspective.
This function is deactivated when 3D Mode set to
"2D -_ 3D" or Off.
m
Depth: Adjusts focus / depth in "2D _ 3D" mode.
This function is only activated when the 3D Mode
is "2D _ 3D".
m
Picture Correction: Adjusts the images for the left and
right eye.
m
3D Auto View (Off / On): If 3D Auto View is set to On,
a "Side by Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
3D Mode: Select the 3D input format.
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
When watching 3D images, turn on 3D Active
Glasses.
Off
Turns the 3D function off.
2D _ 3D
Changes a 2D image to 3D.
Side by Side
Displays two images next to
each other.
Top & Bottom
Displays one image above
another.
Line by Line
Displays the images for the left
and right eye alternately in rows.
Vertical Stripe
Displays the images for the
left and right eye alternately in
columns.
Checker
Board
Displays the images for the
left and right eye alternately in
_ixels.
Frame
Displays the images for the
left and right eye alternately in
frames.
Sequential
0
English
3D _ 2D (Off / On): Displays the image for the left eye
only.
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu,
Support resolution (16:9 only)
1280 x 720p
1920 x 1080i
60 Hz
60 Hz
1920 x 1080p
24 / 30 / 60 Hz
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
Supported formats and operating specifications
Standard HDMm3D
for
The 3D formats indicated below are recommended
by
the HDMI association and must be supported.
How to watch the 3D image
The mode is automatically switched to 3D in one of the
source signal formats above.
Before using 3D function...
NOTE
* You may notice a small amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz - 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
* 3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or [email protected]
* Some Picture functions are disabled in 3D mode.
* PIP is not supported in 3D mode.
* 3D Active Glasses from other manufacturers may not
be supported.
1.
Press the CONTENT button, then the Content View
menu will appear.
2.
Press the _ or I_ button, then select 3D.
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3.
Select OK, then press the ENTERI_
4.
Using the 4 or I_ buttons on your remote control, select
the 3D Mode of the image you want to view.
button.
Some 3D modes may not be available depending
on the format of the image source.
* When the TV is initially powered on, it may take some
time until the 3D display is optimized.
° The 3D Active Glasses may not work properly if there
is any other 3D product or electronic devices turned
on near the glasses or TV. If there is a problem, keep
other electronic devices as far away as possible from
the 3D Active Glasses.
* Photos of Media Play are shown in "2D --_ 3D"
mode only.
* If you lie on your side while watching TV with 3D
active glasses, the picture may look dark or may not
be visible.
* Be sure to stay within the viewing angle and optimum
TV viewing distance when watching 3D pictures.
- Otherwise, you may not be able to enjoy proper 3D
effects.
* The ideal viewing distance should be three times
or more the height of the screen. We recommend
sitting with viewer's eyes on a level with the screen.
English 21
Basic Features
Resets your current picture mode to its default settings.
Changing the Preset Sound Mode
Setting up the TV with Your PC
(_
Set the input source to PC.
(_
MENUiTFI --_Sound _ SRS TheaterSound
ENTER I_
-_
MENUiTrl _ Picture --_ ENTERI_
SRS TheaterSound
Auto Adjustment
..........................................................................................................................
[] Standard: Selects the normal sound mode.
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
[]
[]
[]
Coarse / Fine: Removes or reduces picture noise, If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again, After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position: Adjust the PC's screen positioning if it does
not fit the TV screen, Press the ,t, or T button to adjust
the Vertical-Position. Press the _1 or I_ button to adjust
the Horizontal-Position.
image Reset: Resets the image to default settings.
Using Your TV as a Computer
[]
Music: Emphasizes music over voices,
m
Movie: Provides the best sound for movies.
[]
Clear Voice: Emphasizes voices over other sounds.
[]
Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting Sound Settings
(_
Equalizer
Adjusts the sound mode (standard sound mode only).
[]
Balance L/R: Adjusts the balance between the right and
left speaker.
[]
100Hz / 300Hz / lkHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
[]
Reset: Resets the equalizer to its default settings.
(PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2.
Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3.
Click on "Display" and a display dialog box will appear.
4.
Navigate to the "Settings" tab on the display dialog-box.
•
The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
•
If a vertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
MENU ITTI--_Sound _ Equalizer _ ENTERE_
Sound Settings
(_
MENUITTI --_Sound _ ENTER[_
SRS TruSurround
HD (Off / On) .............................
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
SRS TruDialog
(Off / On) ...................................................
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
2
English
Preferred
Langu ag e
(digital channels only)
DigitaI-TV broadcasts are capable of simultaneous
transmission of many audio tracks (for example,
simultaneous translations of the program into foreign
languages).
You can only select a language among the ones being
broadcasted.
MultFTrack
Sound
SPDIF Output
SPDIF (Sony Philips Digital Interface)is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Ill
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
m
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(MTS) ......................................................................
(0ms - 250ms).
iiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiii
(analog channels only)
Ill
Mono: Choose for channels that are broadcasting in
mono or if you are having difficulty receiving a stereo
signal.
Ill
Stereo: Choose for channels that are broadcasting in
stereo.
Ill
SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Ill
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
W Setting the Time
(_
MENU FITI-_ Setup -_ Time -_ ENTER E_
Time
Clock: Setting the clock is for using various timer
features of the TV.
(_
The current time will appear every time you press
the _NEO button.
If you disconnect the power cord, you have to set
Speaker Select (External Speaker / TV
the clock again,
Speaker) ......................................................................................................................................................................
Clock Mode (Auto / Manual)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker.
* TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
* TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.
- Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically,
-
Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually,
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Eng,ish
23
Basic Features
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
This function is only available when the Clock
Mode is set to Auto.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
If there is no music file on the USB device or the
Time Zone: Select your time zone.
This function is only available when the Clock
Mode is set to Auto.
folder containing a music file is not selected, the
Timer function does not operate correctly.
* When there is only one photo file in the USB,
the Slide Show will not play.
Using the Sleep Timer
(_
* If a folder name is too long, the folder cannot be
selected.
MENU mq _ Setup -_ Time _ Sleep Timer -_
ENTER C_
m
* Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Sleep Timer _
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
Repeat: Select Once, Everyday, Mon~Fd, Mort~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
To cancel the Sleep Timer, select Off.
Setting the On / Off Timer
The ,/
(_
MENU rlTI _ Setup --_ Time _ Timer 1 --_
ENTER I_
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
You can set the TV to turn on automatically at a preset time.
Ill
mark indicates the day is selected.
Timer 1 / Timer 2 / Timer 3: Three different on / off
Locking Programs
timer settings can be made. You must set the clock first.
(_
MENUITTI --_Setup _ Security _ ENTERI_
Security
The PIN input screen appears, Enter your 4 digit PIN number.
Ill
V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
NOTE
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you've
chosen, set to Activate,)
Volume: Set the desired volume level,
Source: Select -iV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to rv): Select Air or
Cable.
Channel (when the Source is set to rv): Select the
desired channel.
4
English
V-Chip is not available in HDMI, Component
or PC mode.
* The default PIN number of a new TV set is
"0-0-0-0".
" Allow All: Press to unlock all TV ratings.
o Block All: Press to lock all TV ratings.
V-Chip Lock (Off / On): You can block rated TV
Programs.
IVParental
Guidelines:
You
canblock
TVprograms
depending
ontheir
rating.
This
function
allows
youto
control
what
your
children
arewatching.
- TV-Y:
Young
children
/ TV-Y7: Children 7 and over /
Canadian French: You can block TV programs
depending on their French Canadian rating.
- G: General / 8 ans+: Programming generally
considered acceptable for children 8 years and over
to watch on their own. / 13 arts+: Programming may
not be suitable for children under the age of 13. /
16 arts+: Programming is not suitable for children
under the age of 16. / 18 arts+: Programming
restricted to adults.
TV-G: General audience / rV-PG: Parental guidance
/ TV-14: Viewers 14 and over / TV-MA: Mature
audience
- ALL: Lock all TV ratings. / FV: Fantasy violence / V:
Violence / S: Sexual situation / L: Adult Language / D:
Sexually Suggestive Dialog
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the 8 ans+ category,
then 13 ans+, 16 arts+ and 18 ans+ will
automatically be blocked also.
The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-Y category,
then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then
all the categories in the young adult group will
be blocked (TV-G, TV-PG, TV-14 and TV-MA).
The sub-ratings (D, L, S, V) work similarly. So,
if you block the L sub-rating in TV-PG, then
the L sub-ratings in TV-14 and TV-MA will
automatically be blocked.
Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
NOTE
* If information is not downloaded from the
broadcasting station, the Downloadable
Rating menu is deactivated,
* Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
MPAA Rating: You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
* The Downloadable U.S. Rating menu
is available for use after information is
downloaded from the broadcasting station.
However, depending on the information from
the broadcasting station, it may not be available
for use.
- G: General audience (no restrictions). / PG: Parental
guidance suggested./PG-13:
Parents strongly
cautioned. / R: Restricted. Children under 17 should
be accompanied by an adult. / N0-17: No children
under age 17./X: Adults only. / NR: Not rated.
* Parental restriction levels differ depending on
the broadcasting station. The default menu
name and Downloadable US Rating change
depending on the downloaded information.
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the PG-13 category,
then R, N0-17 and X will automatically be
blocked.
* Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
Canadian English: You can block TV programs
depending on their Anglophone Canadian ratings.
- C: Programming intended for children under age 8. /
08+: Programming generally considered acceptable
for children 8 years and over to watch on their own.
/ G: General programming, suitable for all audiences.
/ PG: Parental Guidance. / 14+: Programming
contains themes or content which may not be
suitable for viewers under the age of 14. / 18+: Adult
programming.
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
U.S.
* The rating will automatically block certain
categories that deal with more sensitive
material.
* The rating titles (For example: Humor Level..etc)
and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting
station.
m
Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
English 25
Basic Features
How to watch a restricted channel
m
If the TV is tuned to a restricted channel, the V-Chip
will block it. The screen will go blank and the following
message will appear:
Size: Options include Default, Small, Standard and
Large. The default is Standard,
Font Style: Options include Default and Styles 0 to 7.
The default is Style 0.
This channel is blocked by V-Chip. Please enter the PIN
to unblock.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You
can change the color of the letter. The default is White.
If you forget the PIN, press the remote-control
buttons in the following sequence, which resets
the pin to "0-0-0-0:" POWER (off) _ MUTE --_ 8
2 _ 4 _ POWER (on)
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Other Features
(_
Foreground Opacity,: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
MENUITTI _ Setup --_ ENTERE_
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Menu Language
Set the menu language.
1.
Select Menu Language and press the ENTER I_
button.
2.
Choose desired language and press the ENTERI_
button.
Digital Caption Options: (digital channels only)
Return to Default: This option sets each Size, Font
Style, Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
NOTE
* Digital Caption Options are available only
when Default and Service1 ~ Service6 can be
Choose between English, Espafiol and Fran_;ais.
selected in Caption Mode.
Caption
* The availability of captions depends on the
........................................................................................................................................................................
program being broadcasted.
(On-Screen Text Messages)
Ill
* The Default setting follows the standards set by
the broadcaster.
Caption (Off / On): You can switch the
caption function on or off. If captions are
not available, they will not be displayed on
the screen.
* The Foreground and Background cannot be set
to have the same color.
* You cannot set both the Foreground Opacity
and the Background Opacity to Transparent,
The Caption feature doesn't work in
Component, HDMI or PC modes.
Ill
Caption Mode: You can select the desired
caption mode.
The availability of captions depends on the
program being broadcast.
Default / OO1~004 / Text1 ~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels,)
Default / Service1 ~Service6 / 001 ~004 /
Text1 ~Text4: (digital channels only) The Digital Captions
function works with digital channels.
Service1~6 may not be available in digital caption
mode depending on the broadcast.
6
English
Network (Network Type / Network Setup
/ Network Test / SWL (Samsung Wireless
L!nk) / SWL Connect )..........................................................
For details on set up options, refer to the "Network
Connection" instructions (p. 29).
General
m
Game Mode (Off / On): When connecting to a game
console such as PlayStation TM or Xbox TM, you can enjoy
a more realistic gaming experience by selecting the
game menu.
NOTE
Picture In Picture (PIP)
* Precautions
andlimitations
forgame
mode
- Todisconnect
thegame
console
and
connect
another
external
device,
setGame
Mode
toOffin PIP
thesetup
menu.
You can watch the TV tuner and one external video source
- Ifyoudisplay
theTVmenu
inGame
Mode,
the
simultaneously. PIP (Picture-in-Picture) does not function in
screen
shakes
slightly.
the same mode.
* Game
Mode
isnotavailable
when
theinput
source (_ MENUiTrl --_Setup _ PiP --_ ENTERI_
issettoTVorPC.
* After
connecting
thegame
console,
setGame
Mode
NOTE
toOn.Unfortunately,
youmay
notice
reduced
picture * For PIP sound, refer to the Sound Select
quality.
instructions.
* IfGame
Mode
isOn:
If you turn the TV off while watching in PIP mode, the
- Picture
mode
issettoStandard
andSound
mode * PIP
window will disappear.
issettoMovie.
* You may notice that the picture in the PIP window
- Equalizer
isnotavailable.
becomes slightly unnatural when you use the main
[] BE)
Wise
(Off
/ On): Provides the optimal picture quality
screen to view a game or karaoke.
for Samsung DVD, Blu-ray and Home Theater products
which support BE}Wise. When BE}Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
* While V-Chip or [email protected] is in operation, the PIP
function cannot be used.
..................
* PIP Settings
Available when connecting Samsung products
that support BE} Wise through a HDMI cable.
[]
[]
Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
Melody (Off / Low / Medium / Nigh): Set so that a
melody plays when the TV is turned on or off.
Melody is disabled when FastStart is On.
[]
FastStart (Off / On): When the TV is powered on, the
screen will come on quickly with this feature.
Wireless
Remote Control (Off / On)
PC
m
PIP (Off / On): Activate or deactivate the PIP function.
[]
Air/Cable (Air / Cable): Select either Air or Cable as the
input source for the sub-screen.
[]
Channel: Select the channel for the sub-screen.
[]
Size ([3_ / [_
picture.
[]
Position ([_
sub-picture.
Turn on/off or give permission to Samsung mobile phones/
devices.
You must have a Samsung Mobile phone/device which
supports Wireless Remote Control. For more details, refer
to each device's manual.
/ _
/ [Z_ / _
In Double (_,
selected.
[]
(_
/ I_q): Select a size for the sub-
/ [Z):
Select a position for the
iiq) mode, Position cannot be
Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
MENU rlTl _ Support -_ ENTER E_
Legal Not! ce .........................................................................
The Legal Notice may differ depending on the country.
English 27
Basic Features
Self Diagnos!s ............................................................................................................................................................
Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
[]
Picture Test: Use to check for picture problems.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung's Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment,
Please check your connections. If the problem persists,
refer to the external device's user manual.
[]
Sound Test: Use the built-in melody sound to check for
sound problems.
Installing the Latest Version
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu,
[]
By USB: Insert a USB drive
containing the firmware
upgrade file, downloaded
from "www.samsung.com,"
into the TV. Please be careful
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
not to disconnect the power
or remove the USB drive
until upgrades are complete.
The TV will be turned off and
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung's Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device's user manual,
[]
[]
[]
By Online: Upgrade the software using the Internet.
First, configure your network. For detailed
procedures on using the Network Setup, refer to
the "Network Connection" instructions,
If the internet connection doesn't operate properly,
the connection may be broken, Please retry
downloading. If the problem persists, download by
USB and upgrade.
Troubleshooting: If the TV seems to have a problem,
refer to this description.
Software
USBDrive
on automatically after completing the firmware upgrade.
When software is upgraded, video and audio settings
you have made wiii return to their default settings. We
advise you to to write down your settings so that you
can easily reset them after the upgrade.
Signal Information: (digital channels only) An HD
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
If none of these troubleshooting tips apply, contact
the Samsung customer service center.
TVRearPane(
[]
Alternative Software (backup): Displays the software
version downloaded through By Online, During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated,
Upgrade
Software Upgrade can be performed by network
connection or downloading the latest firmware from "www.
samsung.com," to a USB memory device.
Current Version - the software already installed in the T_.
HD Connection
Guide
Refer to this information when connecting external devices
to the TV.
Software is represented as "Year/Month/DayVersion."
Contact
Samsung ...............................................................
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
8
English
Advanced Features
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
•
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
TVRearPanel
Tile ModemPortoil tile Wall
ExternalModem
(ADSL/ VDSL/ CableTV)
Modem Cable (Not Supplied)
LAN Cable {Not Supplied)
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use a Cat 5 cable for the connection. See the diagram below.
W Rear Panel
The ModemPortontheWall
ExternalModem
(ADSL/ VDSL/ CableTV)
IPSharer
(havingDHCPsewer)
.Z
Modem Cabb (Not Supplied)
LAN Cabb (Not Supplied)
LAN Cable (Not Supplied)
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
(#
TVRearPanel
::
The LANPortontheWall
LAN Cable (Not o
oupplbd)
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and reuters that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don't have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
English 29
Advanced Features
Network
Setup (Auto) ..............................................................
Network Setup (Manual) ............................................
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCR To set up your TV's
wired LAN connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
Getting the Network Connection Values
How to set up automatically
1.
Connect your TV to your LAN as described in the
previous section.
2.
Turn on your T_, press the MENU button on your
remote, use the A or T button to select Setup, and
then press the ENTERI_%_button.
3.
Use the A or • button to select Network in the Setup
menu, and then press the ENTERI_%_button. The
Network screen appears.
To get the Network connection values on most Windows
computers, follow these steps:
1.
Right click the Network icon on the bottom right of the
screen.
2.
In the pop-up menu that appears, click Status.
3.
On the dialog that appears, click the Support tab.
4.
On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your TV's cable network connection manually,
follow these steps:
4.
On the Network screen, select Network Type.
5.
Set Network Type to Wired.
6.
Select Network Setup. The Network Setup screen
appears.
7.
Set Intemet Protocol Setup to Auto.
8.
Auto acquires and enters the needed Internet values
automatically.
9.
Wait two minutes, and then press the RETURN button
on your remote. Acquiring an IP address can take up to
2 minutes depending on network conditions.
10. Follow the directions for Manual if the TV does not
automatically acquire a network connection.
0
English
1.
Follow Steps 1 through 6 in the "How to set up
automatically" procedure.
2.
Set Internet Protocol Setup to Manual.
3.
Press the T button on your remote to go to the first
entry field.
4.
Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5.
When done, press the RETURN button on your remote.
6.
Select Network Test to check the Internet connectivity.
Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV's back or side panel USB jack. See the illustration
below.
'_bsTo usetheSWL(SamsungWirelessLink)function,connectto tile USB1 (HDD}port.
The LAN Port on
the Wall
Wireless IP sharer
TV Rear Panel
(AP having DHCP server)
Samsung Wireless
LAN Adapter
LAN Oable (Not Supplied)
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
" You must use the "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
network.
" Samsung's Wireless LAN Adapter is sold separately. The Samsung Wireless LAN Adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com,
" To use a wireless network, your TV must connect wirelessly to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
* Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
" If you apply a security system other than the systems listed below, it will not work with the TV.
" If you select the Pure High-throughput (Greenfield) 802.11N mode and set your AP's Security Encryption type to WEP,
TKIP or TKIPAES (WPS2Mixed), your Samsung TV will not support the connection in compliance with new Wi-Fi
certification specifications,
" If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
.
If your router, modem, or device isn't certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter."
" Connection
Methods: You can setup the wireless network connection six ways.
- Samsung Auto Configuration - For non-Samsung devices.
- PBC (WPS)
- Auto Setup (Using the Auto Network Search function)
- Manual Setup
- SWL (Samsung Wireless Link) - For Samsung devices only.
- Ad-Hoc
" The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via
a USB extension cable other than the one available from Samsung.
English 31
Advanced Features
Notice
The picture may appear corrupted for some channels when the TV is connected to the Samsung Wireless LAN Adapter. If this
occurs, connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.
To reconnect the Samsung Wireless LAN Adapter using the extension
cable, follow these steps:
The Samsung Wireless LAN Adapter should be installed in an
interference-free area in order to avoid interference between the
adapter and tuner.
1.
Connect the extension cable to the USB 1 (HDD) port.
2.
Connect the extension cable and Samsung Wireless LAN
Adapter.
3.
Attach the Samsung Wireless LAN Adapter to the back of the TV
near the top, using double-sided adhesive tape.
Method: Connect via an extension cable
Network Setup (Samsung
Configuration)
Auto
The Samsung Auto Configuration function lets you connect
your Samsung TV automatically to non-Samsung wireless
APs. If your non-Samsung AP does not support Samsung
Auto Configuraton, you must connect using one of the
other methods: PBC 6NPS), auto configuration, or manual
configuration.
2.
After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV When the Samsung Wireless LAN
Adapter establishes a connection with your W, a pop-up
window appears.
3.
As soon as a connection is established, place the AP
parallel to the Samsung Wireless LAN Adapter and not
farther than than 9 and 7/8s inches (25cm) from it.
4.
Wait until the connection is automatically established.
If Samsung Auto Configuration does not connect
To use this function, you must set SWL (Samsung
Wireless Link) to Off in the TV's on-screen menu.
your TV to your AP, a pop-up window appears on
the screen notifying you of the failure. If you want
to try using Samsung Auto Configuration again,
reset the AP, disconnect the Samsung Wireless
LAN Adapter and then try again from Step 1. You
can also choose one of the other connection
You can check for equipment that supports Samsung
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1.
Place the AP and TV next to each other and turn them
on,
Because AP booting times vary, you may have
to wait approximately two minutes for your AP to
boot up.
Ensure the LAN cable is connected to the
WAN port of the AP during Samsung Auto
Configuration. If it is not connected, Samsung
Auto Configuration only confirms that the TV is
connected to the AP, but does not confirm it is
connected to the internet.
2
setup methods: PBC (WPS), auto, or manual.
5.
English
Place the AP in a desired location.
If the AP settings change or you install a new
AP, you must perform the Samsung Auto
Configuration procedure again, beginning from
Step 1.
Network
Setup (PBC 0NPS))
How to set up automatically
How to set up using PBC (WPS)
To set up the wireless connection automatically, follow these
steps:
If your router has a PBC (WPS) button, follow these steps:
1.
Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" procedure.
2.
Press the T button to select Internet Protocol Setup,
and then press the ENTERE_ button. Press the A or
_r button to select Auto, and then press the ENTERI_
button.
3.
Press the A button to go to Select a Network, and
then press the ENTERC_ button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4.
In the list of networks, press the A or _' button to select
a network, and then press the ENTERI_ button.
1.
Connect your TV to Samsung Wireless LAN Adapter as
described in the previous section.
2.
Turn on your T_, press the MENU button on your
remote, use the A or T button to select Setup, and
then press the ENTERI_ button.
3.
Use the A or T button to select Network in the Setup
menu, and then press the ENTERE_ button.
4.
On the Network screen, select Network Type.
5.
Set Network Type to Wireless.
6.
Select Network Setup. The Network Setup screen
appears.
If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
7.
Press the Red button on your remote.
8.
Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9.
After the network connection is set up, press the
RETURN button to exit the Network Setup screen.
Network
Setup (Auto)
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
5.
If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6.
Press the A or T button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
7,
On the Security screen, enter your network's Pass
Phrase.
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
Eng,,sh
33
Advanced Features
8.
To enter the Pass Phrase, follow these general
directions:
- Press the number buttons on your remote to enter
numbers.
- Use the direction buttons on your remote to move
from button to button on the Security Key screen.
- Press the Red button to change case or display
symbols/characters,
How to connect an existing Ad-hoc device
1.
Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 33).
2.
Choose Select a Network, The Device/Network list
appears,
3.
Select the device you want in the Device list.
4.
If security key is required, input the security key.
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again, An incorrect Security Key may cause a
malfunction.
- To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE_ button.
- To delete the last letter or number you entered, press
the Green button on your remote.
9.
When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the ENTERI_ button. The
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTERE_
button.
Network
Network
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1.
Right click the Network icon on the bottom right of the
screen.
2.
In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support tab.
4.
On the Support tab, click the Details button. The
Network settings are displayed.
Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the "Samsung Wireless LAN Adapter" by using a
peer to peer network.
This function is available when SWL (Samsung
Wireless Link) is set to Off in the TV's on-screen
menu.
Setup (Manual) ...................................................
If the other methods do not work, you need to enter the
Network setting values manually.
How to set up manually
How to connect to new Ad-hoc device
To enter the Network connection values manually, follow
these steps:
1.
Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 33).
1.
Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 33).
2.
Choose Select a Network. A list of devices/networks
2.
Press the T button to select Internet Protocol Setup,
and then press the ENTER_
button. Press the A
or T button to select Manual, and then press the
ENTER E_ button.
3.
Press the T button to go to the first entry field (IP
Address).
appears.
3.
While in the device list, press the Blue button on the
remote.
The message Ad-hoc is a direct Wi-Fi
connection with cell phone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.
4.
Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
4.
Use the number buttons to enter numbers.
5.
When done with each field, use the I_ button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6.
Enter the IP Address, Subnet Mask, and Gateway
values.
7.
Press the A or _r button to go to DNS.
8.
Press the T button to go to the first DNS entry field.
Enter the numbers as above.
9.
When done, press the A button to go to Select a
Network. Select your network, and then press the
ENTER_ button.
10. Go to Step 4 in the "How to set up automatically" (p.
33), and follow the directions from that point on.
4
English
SWL (Samsung
wireless
Link) ..........
This function lets you connect your TV to a Samsung device
(router, etc.) that supports PBC (WPS). You can connect the
TV to the device even if a sharer is not connected to the TV.
For the TV to use [email protected], the AP (access point)
must be connected to the wireless network.
If a Samsung Wireless LAN Adapter is connected to the
USB 2 port, the network may not operate normally, We
recommend connecting it to the USB 1 (NDD} port.
Only sharers using the 2.4 Ghz band are supported,
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that
supports PBC (WPS),
This function is available when SWL (Samsung
Wireless Link) is set to On,
To use the SWL (Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the
USB 1 (HDD) port.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAO address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
_rocedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
aroblem. If this is the case, contact your Internet service
arovider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
alease contact Samsung Electronics at 1-800-SAMSUNG.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1. Follow Steps 1 through 5 in the "How to set up using
PBC (WPS)" (p. 33).
2.
Select SWL (Samsung Wireless Link) by using the T
button, and then press the ENTERI_ button to turn it
On.
3.
Select SWL connect by using the _r button and then
press the ENTERIZ_ button.
4.
If the "Press the PBC button on the PBC(WPS)
supported device to connect within 120 seconds."
message appears, press the PBC button on the device
to connect.
For more information, refer to the wireless network
setup manual of the device to be connected.
5.
If the TV connects properly to the device after the count
in the message box starts, then the message box
disappears automatically.
If the connection fails, please retry after 2 minutes.
English 35
Advanced Features
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device.
{_
MENU rm -_ Application -_ Content
View -_ Media Play -_ ENTER E_
Connecting a USB Device
TV Rear Panel
1.
Turn on your W.
2.
Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD} or USB 2 port on the back or side panel of the TV.
3.
When USB is connected to the W, a popup window appears. Then you can
select Media Play.
If an external USB device connected to the TV's USB port draws an excessive
amount of current from the port, the message "USB Power overload" appears
on the screen. This is not a problem with the TV, which provides the standard
current from its USB ports, but a problem with the external device. Please
contact the manufacturer of the device for support.
USB Drive
Connecting to your PC through a network
PC
TVRearPanel
.............................................................................................
'm
' /
/ ............
Samsung
.............X_,
Wireless
LANAdapter
External Modem
_'_
(ADSL/VDSL/Cabb TV)
lessIPsharer
J.....
LAN Cable (Not Supplied)
1.
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
For more information on how to configure your network, refer to "Network Connection" (p. 29).
- You are recommended to locate both the TV and the PC in same subnet. The first 3 parts of the subnet address of the
TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP
Address: 123.456.789.**)
2.
Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
Program will be installed.
- You can connect the TV to the PC directly without connecting it through a Sharer (Router).
6
English
Functions
thatarenotsupported
when
connecting
toaPCthrough
anetwork:
* TheBackground
Music
and
Background
Music
Setting
functions.
* Sorting
filesbypreference
inthePhotos,
Music,
and
Videos
folders.
* The_ (REW)
or[_ (FF)
button
while
amovie
isplaying.
Divx
DRM,
Multi-audio,
embedded
captions
arenotsupported.
Samsung
PCShare
manager
should
bepermitted
bythefirewall
program
onyour
PC.
When
youuseMedia
Play
mode
through
anetwork
connection,
depending
onthefunctions
oftheprovided
server:
* Thesorting
method
may
vary.
* Thescene
search
function
may
notbesupported.
* ThePlay
Continuously
function,
which
resumes
playing
ofavideo,
may
notbesupported.
- ThePlay
Continuously
function
does
notsupport
multiple
users.
(Itwillhave
only
memorized
thepoint
where
the
most
recent
user
stopped
playing.)
* The_ orI_buttons
may
notwork
depending
onthecontent
information.
* You
may
experience
filestuttering
while
playing
avideo
inMedia
Play
through
anetwork
connection.
Itmight
notwork
properly
withunlicensed
multimedia
files.
Need-to-Know
Listbefore
using
Media
Play
* MTP
(Media
Transfer
Protocol)
isnotsupported.
* The
filesystem
supports
FAT16,
FAT32
andNTFS.
* Certain
types
ofUSB
Digital
camera
and
audio
devices
may
notbecompatible
with
thisTV.
* Media
Play
only
supports
USB
Mass
Storage
Class
(MSC)
devices.
MSC
isaMass
Storage
Class
Bulk-Only
Transport
device.
Examples
ofMSC
areThumb
drives,
Flash
Card
Readers
andUSB
HDD
(USB
HUB
arenot
supported).
Devices
should
beconnected
directly
totheTV'sUSB
port.
* Before
connecting
your
device
totheTV,please
back
upyour
files
toprevent
them
from
damage
orlossofdata.
SAMSUNG
isnotresponsible
foranydata
filedamage
ordata
loss.
* Connect
aUSB
HDD
tothededicated
USB
1(HDD)
port.
* Donotdisconnect
theUSB
device
while
itisloading.
* Thehigher
theresolution
oftheimage,
thelonger
ittakes
todisplay
onthescreen.
* Themaximum
supported
JPEG
resolution
is15360X8640
pixels.
* Forunsupported
orcorrupted
files,
the"Not
Supported
File
Format"
message
isdisplayed.
* Ifthefilesaresorted
byBasic
View,
upto1000
files
canbedisplayed
ineach
folder.
* MP3
files
withDRM
thathave
been
downloaded
from
anon-free
sitecannot
beplayed.
Digital
Rights
Management
(DRM)
isatechnology
thatsupports
thecreation,
distribution
and
management
ofthecontent
inanintegrated
and
comprehensive
way,
including
theprotection
oftherights
andinterests
ofthecontent
providers,
theprevention
ofthe
illegal
copying
ofcontents,
aswellasmanaging
billings
andsettlements.
* Ifmore
than
2PTP
devices
areconnected,
youcanonly
useone
atatime.
* Ifmore
than
twoMSC
devices
areconnected,
some
ofthem
may
notberecognized.
AUSB
device
thatrequires
high
power
(more
than
500mA
or5V)may
notbesupported.
* Ifanover-power
warning
message
isdisplayed
while
youareconnecting
orusing
aUSB
device,
thedevice
maynot
berecognized
ormay
malfunction.
* IftheTVhasbeen
noinput
during
time
setinAutoProtection
Time,
theScreensaver
willrun.
* Thepower-saving
mode
ofsome
external
hard
disk
drives
may
bereleased
automatically
when
connected
totheTV.
* IfaUSB
extension
cable
isused,
theUSB
device
maynotberecognized
orthefiles
onthedevice
may
notberead.
* IfaUSB
device
connected
totheTVisnotrecognized,
thelistoffiles
onthedevice
iscorrupted
orafileinthelistis
notplayed,
connect
theUSB
device
tothePC,
format
thedevice
andcheck
theconnection.
* Ifafiledeleted
from
thePCisstillfound
when
Media
Play
isrun,
usethe"Empty
theRecycle
Bin"function
onthePC
topermanently
delete
thefile.
English
37
Advanced Features
Screen Display
Move to the desired file using the up/down/right/left
played.
buttons and then press the ENTERL%_ or F_q (Play) button. The file is
Supports the View Devices and Home in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
FileList Section:
You can confirm the flies and
groups that are sorted by
category.
Sort List Section:
Displays the sorting standard.
'(_bsThe sorting standard is
different depending on the
contents.
Operation Buttons
Q Red (Change Device): Selects a connected devbe.
[(_ Green (Preference): Sets the file preference. (not supported in Basicvbw)
::t Yellow(Select): Selects multipb fibs from file Ibt. Sebcted fibs are marked with a symbol.
Blue (Sorting): Selects the sort Ibt.
_'3 Tools: Dbplays the option menu.
Using the _
(REW) or _
(FF) button, file Ibt can move to next or previous page.
Videos
Playing Video
1.
2.
Press the ,_ or I_ button to select Videos, then press the ENTERI_ button in the Media Play menu.
Press the ,_/I_/_,/T button to select the desired video in the file list.
3.
Press the ENTERI_
button or F_q (Play) button.
- The selected file is displayed on the top with its playing time.
-
If video time information is unknown, play time and progress bar are not displayed.
- During video playback, you can search using the _ and !_ button.
In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
•
Supported Subtitle Formats
8
MPEG-4 time-based text
.ttxt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubVbwer
.sub
string-based
Micro DVD
.sub or .txt
string-based
English
• Supported
Video
Formats
*.avi
*.mkv
AVI
MKV
Divx 3.11 / 4.x / 5.1/6.0
1920x1080
6- 30
XvD
1920xl 080
6 - 30
8
H.264 BP / MP / HP
1920xl 080
6 - 30
25
1920x1080
MPEG4 SP/ASP
6-30
8
800x600
6 - 30
8
Divx 3.11 / 4.x / 5.1/6.0
1920x1080
6 - 30
8
XvD
1920x1080
6 - 30
8
H.264 BP / MP / HP
1920x1080
6 - 30
25
MPEG4 SP / ASP
1920x1080
6-30
Motion JPEG
800x600
6 - 30
8
Window Media Video v9
1920x1080
6 - 30
25
H.264 BP / MP / HP
1920x1080
6 - 30
25
MPEG4 SP / ASP
1920x1080
6 - 30
8
XVID
1920x1080
6 - 30
8
H.264 BP / MP / HP
1920x1080
6 - 30
25
MPEG4 SP / ASP
1920x1080
6 - 30
8
VRO
MPEG1
1920x1080
24 / 25 / 30
30
VOB
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
Motion JPEG
*.asf
ASF
*.wmv
ASF
*.mp4
*.3gp
MP4
3GPP
*.wo
*.mpg
*.mpeg
PS
*.ts
*.tp
8
TS
*.trp
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
8
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 - 30
25
VC1
1920x1080
6 ~ 30
25
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG/ LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
NOTE
* If there are problems with the contents of a codec, the codec will not be supported.
* If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
* Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
* If the Index Table is in error, the Seek (Jump) function is not supported.
•
•
•
Supports up to H.264, Level 4.1
H.264FMO/ASO/RS,
VC1 SP/MP/APL4andAVCHDarenot
supported.
XVID, MPEG4 SP,ASP :
- Below 1280 x 720:60 frame max
-
•
•
•
•
•
•
Supports up to WMA 7, 8, 9, STD
WMA 9 PRO does not support 2 channel excess multi channel or
Iossbss audio.
WMA sampling rate 22050Hz mono is not supported.
Above 1280 x 720:30 frame max
GMC 2 over is not supported.
Only Samsung Techwin MJPEG is supported.
H.263is not supported.
Eng,sh
39
Advanced Features
Playing movie continuously
(Resume Play)
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
If you press the ENTER[_
you want.
button (Chaptering)
during playing the file, you can explore scene divided into 5 chapters
If the index information is damaged or unsupported, you will not be able to use the Chaptering function.
1.
Select the movie file you want to play continuously by pressing
the ,_ or I_ button to select it from the file list section.
2.
Press the FCq (Play) / ENTER I_
3.
Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
button.
The Blue button is available when resuming play.
If the Continuous Movie Play Help function is set to On
in the Settings menu, a pop-up message will appear
when you resume play a movie file.
Music
Playing Music
1.
Press the ,_ or I_ button to select Music, then press the
ENTER I_ button in the Media Play menu.
2.
Press the ,_/I_/A/T
the file list.
button to select the desired Music file in
Press the ENTERI_
button or FCq (Play) button.
3.
- During music playback, you can search using the _1and I_
buttons.
-
F_q (REW) and [_q (FF) buttons do not function during play.
Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Creating My Playlist
1.
Press the _/_/A/T
2.
Select Add My Playlist.
button to select the tracks you want to add and press the TOOLS button.
3.
When the Add My Playlist menu appears, select New My Playlist.
To add to an old play list, simply select the play list you want to add music to.
4.
The newly created or updated playlist will be in the main Music page.
Playing My Playlist
Select the My Playlist folder and it will play automatically. Press the A or _r button to select a different music file within the
playlist.
0
English
Photos
Viewing a Photo (or Slide Show)
1.
Press the ,_ or I_ button to select Photos, then press the
ENTER I:_ button in the Media Play menu.
2.
Press the ,_/I_/A/T
file list.
3.
button to select the desired photo in the
Press the ENTERI:_ button or FCq (Play) button.
- While a photo list is displayed, press the Fcq (Play) /
ENTERI_ button on the remote control to start the slide
show.
- All files in the file list section will be displayed in the slide show.
- During the slide show, files are displayed in order.
Music files can be automatically played during the slide show if
the Background
Music is set to On.
The BGM Mode cannot be changed until the BGM has finished
loading,
Playing Multiple Files
Playing selected video/music/photo
files
1.
Press the Yellow button in the file list to select the desired file.
2.
Repeat the above operation to select multiple files.
NOTE
" The _
mark appears to the left of the selected files.
" To cancel a selection, press the Yellow button again,
. To deselect all selected files, press the TOOLS button
and select Deselect All.
3.
Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo
file group
1.
While a file list is displayed, move to any file in the desired group.
2.
Press the TOOLS button and select Play Current Group.
Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files,
___:_:_!_i_!_!_!i_iiii_i_!_ii_i_i_i_i!_!_!_!_!_i_i!_i_!_!:!i_!i_!i_!i_!i_!i_!i_!_!i_!i_!i_!_i_i!i!_!ii!ii!ii!i
¸i_i!i
¸ii
¸__!_!!
Basic View
DisplaysthewholefoldenYoucan viewthephotobyselectingthefolden
v
v
v
Title
SortsanddisplaysthefiletitleinSymboFNumber/AIphabet/Special
order.
v
v
v
Preference
Sortsanddisplaysthefileby preference.
Youcan changethefilepreferenceinthefile
listsectionusingtheGreenbutton.
v
v
v
_} Latest Date
Sortsandshowsfilesbythe latestdate.
v
_
Earliest Date
Sortsandshowsfilesbytheearliestdate.
v
Artist
Sortsthe musicfilebyartistinalphabeticalorder.
v
!2
v
v
Sortsthe musicfilebyalbumin alphabetical
order.
v
Genre
Sortsmusicfilesbythegenre.
v
Mood
Sortsmusicfilesbythemood.Youcanchangethemusicmoodinformation.
v
i_ Album
_:_ Monthly
v
Sortsandshowsphotofilesbymonth.
English
41
Advanced Features
Videos/Music/Photos
Play Option
During file playback,
menu
press the TOOLS
button.
Title
You can move directly to another Titb.
v
Repeat Mode
You can play movb and mush files repeatedly.
v
Picture Size
(Model / Mode2 / Original)
You can adjust the pbture size to your preference.
v
v
Picture Setting
You can adjust the pbture setting. (p. 16 - 22)
v
Sound Setting
You can adjust the sound setting. (p. 22, 23)
v
v
Subtitle Setting
You carl play the vkJeowkh Subtitles. This function only works if the subtitles are the
same file name as the video.
v
Audio
You can enjoy video in one of supported languagesas required. The function is only
enabled when stream-type files which support multiple audio formats are played.
v
Stop Slide Show /
Start Slide Show
You can start or stop a slide show.
v
Slide Show Speed
You can select the slide show speed during the slide show.
v
Slide Show Effect
You can set various slide show effects.
v
Background Music
You can set and select background music when watching a slide show.
v
Zoom
You cars zoom into images in full screen mode.
v
Rotate
You cars rotate images in full screen mode.
v
Home Background
You cars move the file to the Media Play desktop.
Information
You cars see detailed information about the playedfile.
v
v
v
v
v
v
Settings ........................................................................................................................................................................
Using the Setup Menu
Ill
Background
Ill
Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
Setting: Select to display the background you want.
Ill
Get DJvX® VOD registration code: Shows the registration code authorized for the T_. If you connect to the DivX web site
and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration
is completed,
Ill
Get DJvX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If
you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Ill
information:
For more information on DivX® VOD, visit "www.DivX.com."
2
English
Select to view information about the connected device.
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
iF"........................................................................................................................................................................................................................................................................................................................................................................................................................
:
:i:
Anynet+
Device1
HomeTheater
TV RearPanel
z
Optical
iiii]iiiii!
_:
Anynet+Device
2, 3, 4
_}
Cable
(Not Supplied)
I
iiiiiiF
HDMI Cable (Not Supplied)
HDMI Cable (Not Supplied)
2(ARC)
[_
HDMI Cable (Not Supplied)
I{DVI)
_}
1.
Connect the HDMI IN (1(DW), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+
device using an HDMI cable.
2.
Connect the HDMI IN jack of the Home Theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
NOTE
* Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theater.
* The ARC function enables digital output of sound using the HDMI IN 2(ARC} port and can only be operated when
the TV is connected to an audio receiver that supports the ARC function.
* When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater's Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL} jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
* You can connect only one Home Theater.
* You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
* Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
* Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English 43
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
View TV
Device List
Changes Anynet+ mode to TV broadcast mode,
Shows the Anynet+ device list,
(devicename) MENU
Shows the connected device menus, E.g, If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(devicename) INFO
Shows the play menu of the connected device. E.g, If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver,
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*devicename),
Setting Up Anynet+
(_
MENU ITTI_ Application
Ill
--_Anynet+ (HDMI-CEC) _ ENTERI_
Setup
Anynet+ (HDMI-CEC) (Off/On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
May not be enabled depending on the device.
(
Switching between Anynet+ Devices
1.
Anynet+ devices connected to the TV are listed,
2,
Select a device and press the ENTERI_
If you cannot find a device you want, press the Red button to refresh the list.
button. You can switch to the selected device.
The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application
menu.
" Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
" If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
4
English
Recording
You can make a recording of a TV Program using a Samsung recorder.
1.
Select Recording.
When there are more than two recording devices
* When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List,
When the recording device is not displayed, select Device List and press the Red button to search devices.
2.
Press the EXIT button to exit.
You can record the source streams by selecting Recording:
(devicename).
Pressing the [_q (REC)button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
Listening through a Receiver
You can listen to sound through a receiver (i,e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2.
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL} jack of the TV.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air)signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
* You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
* The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
* The Anynet+ functions do not operate with other manufacturers' products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1. Select Receiver and set to On.
2.
Press the EXIT button to exit.
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDM_
_N 2 (ARC} port.
To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver
will be blocked from receiving the signal.
English 45
Advanced Features
I
Troubleshooting
for Anynet+
Anynet+ does not work.
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theater) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
•
•
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn't work in certain situations. (Searching channels, operating Media Play or Plug & Play (initial
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
Check if the Anynet+ Function of Anynet+ device is set on.
•
•
I want to start Anynet+.
•
•
Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-OEC) is set to
On in the Anynet+ Setup menu.
Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•
•
•
Select View TV in the Anynet+ menu.
Press the SOURCE button on the TV remote control and select a non- Anynet+ device.
Press V CH A, PREoCH,and FA_LCHto change the TV mode. (Note that the channel button operates
only when a tuner-embedded Anynet+ device is not connected.)
The message "Connecting to
Anynet+ device..." appears on the
screen.
•
•
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
•
You cannot use the play function when Plug & Play (initialsetup) is in progress.
The connected device is not
displayed.
o
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-OEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
If connection is terminated because there has beersa power interruption or the HDMI cable has been
disconnected, pleaserepeat the device scars.
o
o
o
o
o
The TV Program cannot be
recorded.
•
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
•
•
Connect the optical cable between TV and the receiver.
The ARC function enables digital output of sound using the HDMI IN 2(ARC} port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
6
English
_. Getting Started with [email protected]
@TV
[email protected] brings useful and entertaining
your TV.
{_
MENU iTrl _ Application -+ Content
contents and services directly from the web to
View _ [email protected] _ ENTERE_
Screen Display
Recommended Applications:
Displaysthe recommended service by
Samsung. You are not able to add or
delete a service in this list,
Displays the current channel.
Information:
applications, and
advertisements brought to
you by Samsung product
introductions.
Application
Downloaded Applications:
Displaysthe downloaded applications
through the Samsung Apps.
service:
You can experience
various service
by provided
Sal llSUllg.
[email protected] Settings:
Edit and configure applications
and [email protected] settings.
Controls:
• D Red (Login): To log in to [email protected]
• _SGreen (Mark as Favorite): To mark the applications as a favorite.
• _ Blue (Sort by): To sort the applications.
• 9 Return: To return to the previous menu.
'(_bs Tile color buttons may work differently depending on the application.
NOTE
Configure the network settings before using [email protected] For more information, refer to "Network Connection" (p.
29),
* Unsupported fonts within the provider's content will not display normally.
* Slow responses and/or interruptions may occur, depending on your network conditions.
* Depending on the region, English may be the only language supported for application services.
* This feature is not available in some locations,
* If you experience a problem using a application, please contact the content provider.
* According to circumstances of the contents provider, an application's updates or the application itself may be
discontinued.
* Depending on your country's regulations, some applications may have limited service or not be supported.
English 4
7
Advanced Features
Account Login
For an application with multiple accounts, use _ and _, to
access the different accounts.
ml System Setup
Ticker Autorun (Off / On): You can set Ticker Autorun
to come on when powering on the TV.
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on [[email protected] must be
downloaded to use this feature.
Depending on your country, the Ticker application
may have a different service or not be supported.
Channel Bound Service (Off/On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
For a more enjoyable application experience, register
and log in to your account.
For instructions on creating an account, refer to
Settings --_ [email protected] ID _ Create.
1.
Press the Red button in the [email protected] home page.
2.
Select the desired User account, then press the
ENTER I_ button.
If you want to create an account, press the Red
button; then the create account OSD window will
appear.
3.
After selecting User account, enter the Password using
the number button on the remote control.
When Iogin succeeds, User account will be
displayed on the screen.
Change the Service Lock password
The default password set is "0-0-0-0."
If you forget the password you created, press the
following sequence of remote control buttons to
reset the password to "0-0-0-0": POWER (off)
MUTE _ 8 --_2 --_ 4 --_ POWER (on).
Reset: Resets [email protected] settings to factory default
settings.
ml [email protected]
ID
You can use this menu when creating and deleting
the account. You can control your account including
contents site's account information.
Create: Create an account and link it with desired
service applications.
NOTE
* Maximum number of accounts is 10.
Setting up [email protected]
Settings
Create IDs and configure [email protected] settings from this
screen. Highlight Settings using the A and T buttons and
press the ENTERE_ button.
8
English
* Maximum number of characters is 8.
How to create [email protected] ID
5.
Before creating a User account, you should download
the application first on the Samsung Apps.
Using the number buttons, enter the User account
and Password.
" Password must be numbers only.
1.
Using the A/T/_I/I_
button, select Settings. Then
press the ENTERIZ_ button.
" You can delete the entered character using the
PREoOH button.
2.
Press the V button to select [email protected] ID, then
" Using the F_q (nEW) or [_q (FF) button, you
can select icon you want to enter in icon keypad
screen,
press the ENTERI_
or I_ button.
3.
Select Create. The Keypad screen will appear.
4.
The keypad OSD will be displayed on the screen.
6.
Account created. You can use the services provided
by all users of your Samsung TV with a single
Iogin by linking the users' account to the TV ID. If
you want to register a service site ID, select Yes.
Service Site list will appear on the screen.
7.
Select Register of the Service Site you want, then
press the ENTERI_ button.
8.
Using number buttons, enter your application site ID
and password. Then press the ENTERIZ_ button.
9.
Registered successfully. If you add another service
site, select Yes. then press the ENTERI_ button,
go to step 5.
Using the Keypad
Pressing the - button on the remote while you are
using the Screen Keypad enables you to change the
text fields to lower case, upper case, numbers and
icons.
You can use this Screen Keypad in a several [email protected]
TV applications.
Here is how to input characters.
4-1.
For example, suppose that you want to input
"105Chang",
4-2.
Press the - button on the remote twice to
10. When completed, select OK, Then press the
ENTER I_ button.
change the input mode from lower case to
numbers.
4-3.
Press the 1,0 and 5 button in numerical order.
4-4.
Press the - button on the remote 3 times to
Manager
- Service Site: Register Iogin information for service
sites.
change the input mode from numbers to upper
case.
4-5.
Press the 2 button on the remote 3 times to
input C.
4-6.
- Change Password: Change account password.
- Delete: Delete the account.
m
Press the - button on the remote 3 times to
Lock: Lock the application.
Accessing a locked application requires the
password,
change the input mode from upper case to
lower case.
4-7.
Service Manager: Delete and lock applications installed
to [email protected]
Press buttons on the remote to input the rest
of "Chang". When done, press the ENTERI_
button.
Delete: Delete the application.
m
Properties: Display information about [email protected]
the Check the speed of your internet connection
option to test your network connection.
English 49
Advanced Features
Using the [email protected] service
Using the Samsung Apps by category
The following categories are available:
• What's New?: Displays newly registered applications.
Samsung Apps ..........................................................................................................................................................
• Video: Displays various video media such as movies, TV
shows and short length videos.
Samsung Apps is a store for downloading applications to be
used on Samsung TV/AV equipment.
•
Users can enjoy a variety of contents such as videos, music,
photos, games, useful information etc. using the downloaded
applications.
Sports: Displays various sports media such as match
information, images and short length video.
•
Lifestyle: Includes various lifestyle media services such
as music, personal photo management tools and social
networking such as Facebook and Twitter.
information: Includes various information services such
as news, stocks and weather.
Other: Includes other miscellaneous services.
Additional applications will be available in the future.
•
•
•
My Page: Displays the application list and your cyber
cash balance.
Starting in the middle of 2010 (US and Korea
only), you can purchase cyber-cash for buying
applications through tv.samsung.com.
•
Help: If you have questions about [email protected],check
this section first.
Using the color buttons with the Samsung Apps.
" D Red (Login): To log in to the internet service,
" /I_Z
Green (Thumbnail View): To change the view
mode.
" @ Blue (Sort By): To sort the applications by
Featured, Most downloaded, Most recent or
Name.
" 'D Return: Moves to previous menu.
[Legal Statement]
Due to the various capabilities of products featuring the Samsung [email protected] - Content Service, as well as limitations in
the available content, certain features, applications, and services may not be available on all devices or in all territories,
Some features on [email protected] may also require additional peripheral devices or membership fees that are sold separately.
Please visit http://www, samsung,com for more information on specific device information and content availability. The
services and availability of content through [email protected] are subject to change from time to time without prior notice.
0
English
Yahoo
[email protected] provides an integrated Internet and television experience powered by the Yahoo!® Widget
Engine. You can monitor financial stocks, share photos with friends and family, and track news and
weather all through the Yahoo!® Widget Engine.
When running [email protected] for the first time, you will be prompted to configure the basic settings.
Depending on your country's regulations, some applications may have limited service or not be
supported.
Screen Display
•
Dock Mode
Welcome Banner: Shows your profile.
• _ Blue (Viewport): Toggles between Viewport and
Overlay modes.
•
Yellow (Edit Snippet): To edit snippets with a help
window.
'_bs
In Viewport mode, the TV or video plays in a
scaled-down area with graphics outside. In
overlay mode, the graphics are displayed on
top of the TVor video.
Dock: Displaysyour snippets.
• Snippets are quick launchicons for your widgets.
'_bs PROFILE Widget and Widget Gallery cannot be
deleted.
•
Sidebar Mode
Widget logo and Current menu.
Contents List :
The current selection is highlighted in blue.
Displays the current page and number of total pages.
Controls:
•
•
•
•
Q Red: To close the widget, If you want to see the Dock mode,
press the YAHOO! button.
[_i_Green: To change the widget's settings.
_ Yellow: To manage your snippets.
_ Blue: To size video to fit or display in full screen.
'_bs Some buttons may not be availablewith certain widgets.
Editing Snippets in the Dock
1.
Edit a snippet by selecting it in the dock and pressing the Yellow button.
2.
The snippet moves to the Second position and its tile slides up to show the following help text:
Using the color buttons with the dock mode.
* D Red (Delete): To remove the widget.
Deleted widgets can be restored from Widget Gallery.
* _ Blue (Move): To rearrange snippets.
*
Yellow (Done): To exit the Edit Snippet menu.
English 51
Advanced Features
PROFILE Widget
•
Set up user profiles through Profile Widget. You can set up
multiple profiles, each with its own list of widgets. Use the
Switch Profile option to switch to a different user profile.
Use the Profile Settings option to customize and
protect your profile.
- Create and configure a new profile with a unique set
of widgets.
- Delete an existing profile.
•
- User profiles can be
customized with a unique
name and avatar (a picture
used to represent your
profile).
option.
The Profile Settings option limits access to the profile's
widgets.
-
If you forget your Profile PIN, answer your profile's
Security Question.
- New widgets cannot be added to profiles with the
Limit Profile indicator enabled.
Owner PIN must be set to use this feature.
For instructions on setting Owner PIN, refer to
Administrative Controls.
•
-
•
Use Yahoo!® Widget Gallery to add more widgets to your T_.
View available TV widgets in the following categories:
II
Featured: Displays
recommended widgets.
m
Latest: Displays the most
recent widgets,
m
All widgets: Displays all
widgets.
m
Categories: Displays all
widgets by category.
To install a widget, select Add
Widget to My Profile and
press the ENTERE_ button.
The widget will be installed
and become available in the
dock.
- Restore Factory Settings resets all widget settings
and information.
(off) _ POWER (on) --_ YAHOO! (If Yahoo
Service is displayed on the TV Screen, You
should stop the Yahoo Service using EXIT
button in advance.).
2
English
About Profile Widget: Press the Green button to view
a brief description of Profile Widget, Copyright Policy,
Terms of Service, and Privacy Policy.
Widget Gallery
- Replay the tutorial that was shown during guided
setup.
When you cannot run Restore Factory
Settings normally or you can not install/run
the specific widgets normally, press the remote
control buttons in the following sequence,
which resets the Yahoo Service: POWER (on)
--_ MUTE _ 9 _ 4 -, 8 -, EXIT _ POWER
If you do not have a Yahoo! account, visit "www.
yahoo.corn" to create one.
- You may not be able to log in with an ID created
through a Yahoo website in a country that does not
support [email protected]
System Settings allows you to:
- Change your Location and Zip Code (US only) to
tailor contents specific to your region.
If you have a Yahoo! ID, you can access personalized
content using Yahoo! TV widgets.
- You will be automatically signed-in to all installed
Yahoo! TV widgets with your profile's Yahoo! ID.
- When setting up a new
PIN, you can set a Security
Question,
•
Sign into Yahoo!® from PROFILE Widget using your
Yahoo! ID.
-
- Your profile's name and
avatar are displayed in the
profile snippet in the dock.
- Protect your profile using
the Create Profile PIN
Controls menu you can:
- Create Owner PIN and set a Security Question to
control other profiles.
There must be at least two registered profiles. For
instructions on adding a profile, refer to Administrative
Controls.
•
From the Administrative
- Configure the Screen Saver timeout to avoid screen
burn-in.
m
Widget Gallery Settings: Press the Green button.
- About Yahoo! Widget Gallery...: You can view brief
information for the Widget Gallery, Copyright Policy,
Terms of Service, and Privacy Policy.
- iV Widget Software: Displays the current version of
the system software, and installed widgets.
- Create your own widgets through the Developer
Settings menu. For more information, visit our
developer site at http://connectedtv.yahoo.com/.
Troubleshooting
for [email protected]
Some application
contents only appear
in English, How can I change the
The Application
content
interface language.
language?
The ability to change
language
the language
may be different
depends
from the application
user
on the service provider,
Check with the service provider.
Some application
When
a network
use the setting
services
do not work.
error occurs,
menu.
I can only
Refer to the help website
If network
functions
connection
except
for application
doesn't
the setting
service provider
work, your service might
information.
be limited, as all
menu are needed to connect
to the internet.
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or
services in a manner that has not been authorized by the content owner or service provider. Without limking the foregoing, unless expressly authorized
by the applicaNe content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivativeworks,
exploit, or distribute in any manner or medium any content or services displayed through this device.
YOU EXPRESSLYACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE ISAT YOUR SOLE RISK AND THAT THE ENTIRERISK AS TO
SATISFACTORYQUALITY, PERFORMANCEAND ACCURACY ISWITH YOU. THE DEVICE AND ALL THIRD PARTYCONTENT AND SERVICESARE
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLYDISCLAIMS ALL WARRANTIES
AND CONDITIONS WITH RESPECTTO THE DEVICEAND ANY CONTENT AND SERVICES, EITHEREXPRESS OR, IMPLIED, INCLUDING BUT NOT
LIMITEDTO, WARRANTIESOF MERCHANTABILITY,OF SATISFACTORYQUALITY, FITNESS FORA PARTICULAR PURPOSE, OF ACCURACY, OF
QUIET ENJOYMENT,AND NON-INFRINGEMENTOF THIRD PARTY RIGHTS. SAMSUNG DOES NOT GUARANTEETHE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY,OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICEAND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR SERVICESWILL MEETYOUR REQUIREMENTS,OR THATOPERATION OF THE DEVICE OR
SERVICESWILL BE UNINTERRUPTEDOR ERROR-FREE.UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE,SHALL SAMSUNG BE
LIABLE, WHETHER IN CONTRACT OR TORT, FORANY DIRECT,INDIRECT,INCIDENTAL,SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY
FEES, EXPENSES,OR ANY OTHER DAMAGES ARISING (bUT OF, OR IN CONNECTION WITH, ANY INFORMATKbNCONTAINED IN, OR AS A
RESULTOF THE USE OF THE DEVICE,OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY,EVEN IF ADVISED OF THE
POSSIBILITYOF SUCH DAMAGES.
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and
Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are
transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this
disclaimer, Samsung expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content
or service made available through this device. Samsung may impose limits on the use of or access to certain services or content, in any case and
without notice or liability.
Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the
content or services should be made directly to the respective content and service providers.
Eng,,sh
53
Advanced Features
Message
(_
MENU rm _ Application
AliShare --_ ENTERI_
_ Content View
/ Media / ScreenShare ....................................
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
The Media function is available in all mobile devices
About AIIShare
AIIShare connects your TV and compatible Samsung mobile
phones/devices through a network. On your T_, you can
view call arrivals, SMS messages and schedules set on your
mobile phones. In addition, you can play media contents
including videos, photos and music saved on your mobile
phones or the other devices (such as your PC) by controlling
them on the TV via the network. Additionally, you can use
your TV for browsing web pages in your mobile phones.
For more information, visit "www.samsung.com" or
contact the Samsung call center. Mobile devices may
need additional software installation. For details, refer to
each device's user's guide.
which support AlIShare.
Ill
Allowed / Denied: Allows/Blocks the mobile phone.
Ill
Delete: Deletes the mobile phone from the list.
This function only deletes the name of the mobile
from the list. If the deleted mobile device is turned
on or trys to connect to the TV, it may appear on
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TM
NOTE
Setting Up AIIShare
To disable the alarm window, set Message to Off in
Setup of AIIShare.
If OK is selected, or if OK is not selected after the
message has appeared three times, the message
Setup ............................................................................................................................................................................
Ill
Ill
Message (On / Off): Enables or disables the message
function (for call arrivals, SMS messages and schedules
set on your mobile phones).
Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports AllShare.
Ill
ScreenShare (On / Off): Enables or disables the
ScreenShare function for using mobile phone as a
remote control.
will be deleted. The message is not deleted from the
mobile phone.
The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AIIShare and select Denied to block the
phone.
Message View
m
-iV name: Sets the TV name so you can find it easily on
a mobile device.
If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
If a new SMS message arrives while you are watching
T_, the alarm window appears. If you click the OK
button, the contents of the message are displayed.
You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
Some types of characters may be displayed as
blank or broken characters.
4
English
Call Arrival Alarm
Using ScreenShare Function
If a call arrives while you are watching T_, the alarm
window appears.
Using ScreenShare, you can browse various web contents
provided by the mobile phone. For example, the image
below displays an access page for contents on a mobile.
You can read the mobile's files and view the phone book and
calendar on the TV. Also, in the phone book, you can make a
call to another person, or send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
Some special characters may be displayed as
blank or broken characters.
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your T_. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXiT button when the alarm
window appears, the media contents are not played.
NOTE
You must have ScreenShare installed on your
Samsung Mobile phone/device to use this feature.
Doc Viewer can read files in doc format, but cannot
modify them.
The screen display may differ depending on the
connected device.
NOTE
* If the media function executes for the first time,
the warning popup window appears. Press the
ENTERI_ button to select Allow, then you can use
Media function on that device.
Using your Samsung Phone to Operate Your iV
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
only the POWER, --VOL+, v CN A and MUTE buttons
are supported.
Even if you keep pressing down on a control button
(channel or volume) on the mobile phone, the value will
only go up or down by one unit.
To turn off the media contents transmission from
the mobile phone, set Media to Off in the AIIShare
setup.
o
Contents may not be played on your TV depending
on their resolution and format.
o
The ENTERI_ and _ / I_ buttons may not work
depending on the type of media content.
o
Using the mobile device, you can control the media
playing. For details, refer to each mobile's user's
guide.
When you want to play media contents from
your PC, select the PC icon on the main display
of AIIShare, Then the TV's Media Play menu
automatically changes. For more detail information,
refer to "Media Play" (p. 36).
English 55
Other Information
Stand Type
Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand.
rH
®
@
@
e
Wall-Mount
Type
7
@
®
Do not pull the cables too hard when arranging them. This may cause damage to the product's connection terminals.
6
English
Attaching the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
BlankingBracket
o°
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
/
I
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications
(VESA)
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
NOTE
Standard dimensions for wall mount kits are shown in the table below.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
Our 58" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated wall
mount kit for this model.
Do not mount the TV at more than a 15 degree tilt.
Always use two people to mount the TV to a wall.
English 57
Other Information
42-50
400 X 400
58-63
600 X 400
70-79
800 X 400
80-
1400 X 800
PDP TV
B
M8
Unscrew the hole around before installing Wall-Mount on the wall.
I
///_
Do not install
electric
shock,your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
Keep the required distances between the product and other objects (e,g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
* If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the
product falling.
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
ist_iiati_
i
i
[ 4 inches
;
i_
_ii
_
[ 4 inches
4 inches
4 inches
,,_._
I
8
English
I
[_4_
_sb_s_
......
I
I
Caution:
Pulling,
pushing,
orclimbing
ontheTVmay
cause
theTVtofall.Inparticular,
ensure
your
children
donothang
over
ordestabilize
theTV.
Doing
somay
cause
theTVtotipover,
causing
serious
injuries
or
death.
Follow
allsafety
precautions
provided
intheincluded
Safety
Flyer
withyour
T_,Foradded
stability
and
safety,
youcanpurchase
andinstall
theantifalldevice
asdescribed
below,
The TV-Holder Kit (Sold Separately):
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw
appropriate for the wall or cabinet you intend to secure the Td-Holder string to. We recommend a size M4xL20 wood screw,
Installing the TV-Holder
1.
Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in
the TV-Holder Kit that is designated for your T_,
Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.
2.
Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.
If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a
molly to anchor the screw.
3.
Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below.
Install the TV close to the wall so that it does not fall.
When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety
purposes.
Check the cord occasionally to make sure it is secure.
Before moving the TV, separate the connected cord first.
4.
Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a professional installer.
To purchase the rV-Holder
Kit, contact Samsung Customer Care
- In the United States: 1-800-SAMSUNG (1-800-726-7864)
- In Canada: 1-800-SAMSUNG (1-800-726-7864)
English 59
iiiiiiiiiiiiiiiiiiiiii
Other Information
if the TV seems to have a problem, first try this list of possible problems and solutions, if none of these troubleshooting
apply, visit "www.samsung,com,"
then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Poor pbture
TtqeTV image does not look as good as it
did in the store.
Eirst ef all, please perform the Picture Test and confirm that yourW is pr"oper!ydbplaying the tfist image.
(go to MENU - Support - Self Diagnosis. Picture Test) (p. 28)
If the test image is properly displayed, the poor picture may be caused by the source or signak
•
•
•
Ttqepicture is distorted: macro block error,
small block, dots, pixelization,
tips
If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or
Component cables to deliver HD (high definition) picture quality.
Cable/Satellite subscribers: Try HD stations from the channel lineup.
Antenna connection: Try HD stations after performing Auto program.
Many HD channeb are up scabd from SD (Standard Definition) contents.
•
Adjust the Cabb/Sat box video output resolution to 1080i or 72%.
•
Compression of video contents may cause picture distortion, especially in fast moving pictures such
as sports and action movies.
Low signal level carscause picture distortion. Ttqisis not a TV problem.
Mobile phones used close to the TV (cca up to lm) may cause noise in picture on analog and digital
T_
•
•
Color is wrong or missing.
•
If you're using Component connection, make sure tlqecomponent cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
Ttqereis poor color or brightness.
•
Adjust the Picture options in the TV menu ( go to Picture mode / Color / Brightness / Sharpness)
(p. 16).
Adiust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution Energy Saving)(p. 16)
Try resetting tlqepicture to view the default picture settings (go to MENU - Picture - Picture Reset)
(p. 22)
•
•
Ttqereis a dotted line on the edge of the
screen.
•
•
if the picture size is set to Screen Fit, change it to 16:9 (p. 18).
Change cabb/satellite box resolution.
The picture is black and white.
•
If you are using an AV composite input, connect the video cabb (yellow)to the Green jack of
component input 1 on tile T_
Wtqen changing channels, tlqe picture
freezes or is distorted or delayed,
•
If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
Set the output resolution of tile cable box to 1080i or 72%.
•
3D
The 3D Active Glasses may not work
properly if there is any other 3D product
or electronic devices turned on near the
glasses or T_
•
If there is a problem, keep other electronic devices as far away as possible from the 3D Active
Glasses.
You may notice a small amount of screen
flickering when watching 3D images in
poor light conditions (from a strobe light,
etc.), or under a fluorescent lamp (50Hz
60Hz) or 3 wavelength lamp.
•
If so, dim the light or turn the lamp off.
The ideal viewing distance should be three
times or more the height of the screen.
•
We recommend sitting with viewer's eyes on a level with the screen.
If you leave 3D glasses on, battery lifespan
is shortened.
•
Turn off 3D glasses while not using them.
0
English
i @iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iHiiiii iiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Sound Problem
First of all, please perform the Sound Test to confirm that your qV audio is proPerly operating.
(go to MENU - Support. Self Diagnosis --Sound Test) (p. 28)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
•
Please check the volume of tlqedevice (Cable/Sat Box, DVD, Blu-ray etc) connected to your T_
Ttqepicture is good but there is no sound.
•
•
Set the Speaker Select option to TV Speaker in tlqeSound menu (p. 23).
If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the T_
If you are using an external device, check the device's audio output option (ex. you may need to
change your cable box's audio option to HDMI wtqenyou have a HDMI connected to your TV).
If you are using a DVIto HDMI cable, a separate audio cable is required.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by reconnecting the device's power cable.
•
•
•
•
Ttqespeakers are making an inappropriate
noise.
•
•
•
Check cable connections. Make sure a video cable is not connected to an audio input.
For antenna or Cable connections, check the signal strength. Low signal level may cause sound
distortion.
Perform the Sound Test as explained above.
No Picturel No Video
The TV won't turn on.
•
•
•
Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the POWER button on the TVto make sure the problem is not the remote. If the TVturns
on, refer to "Remote control does not work' below.
The TV turns off automatically.
•
•
•
•
Ensure the Sleep Timer is set to Off in the Setup menu. (p. 24)
If your PC is connected to the T_, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the T_
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
There is no picture/video.
•
Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device's output is HDMI, it should be connected to an
HDMI input on the T_
Make sure your connected devices are powered on.
Be sure to select the TV's correct source by pressing the SOURCE button on the remote control.
Reboot the connected device by reconnecting the device's power cable.
•
•
•
•
RF(Cable/Antenna)Connection
The TV is not receiving all channels.
•
•
•
Make sure the coaxial cable is connected securely.
Please try Auto Program to add availablechannels to the channel list. Go to MENU - Channel Auto Program then select Auto and make sure the correct Cable TV signaltype is set in the menu.
There are 3 options. (STD, HRC and IRC) (p. 14)
Verify the Antenna is positioned correctly.
No Caption on digital channels.
•
•
Check Caption Setup menu. Try changing Caption Mode Service 1 to OO1. (p. 26)
Some channels may not have caption data.
The picture is distorted: macro block error,
small block, dots, pixelization,
•
Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
A low signal can cause picture distortion. This is not a TV problem.
•
Other Information
iiiiiii_i_iiiiii
[email protected]_iii_iiiiiii_iiiiiii_iiiiiii_iiiiiii_iii!i!iii1iiiiiiiiiiiiiiiii_[email protected]
_iiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
.....
i
..........
i...........................................
1"" YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
PC Connection
A "Mode Not Supported" message
appears.
•
Set your PC's output resolution so it matches the resolutions supported by the T_ (p. 12)
"PC" is always stlown on tile source list,
even if a PC is not connected.
•
Ttlis is normal; "PC" is always stlown on tile source list, regardless of wtlether a PC is connected.
Tile vkJeois OK but there is no audio.
•
if you are using an HDMI connection, check the audio output setting on your PC.
Tile wireless network connection failed.
•
•
•
Tile Samsung Wireless USB dongb is required to use a wireless network.
Make sure the Network Connection is set to Wireless (p. 31).
Make sure the TV is connected to a wireless IP stlarer (router).
Software Upgrade over the network fail
•
•
Try network test in Setup menu (p. 26).
if you have latest SW version, SW upgrade will not proceed.
Purpb/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection,
•
Remove the left and right audio connections from tile set-top-box. If tile buzzing stops, this indicates
tllat tile set-top-box has a grounding issue. Replace the Component video cables with an HDMI
connection.
The picture won't display in full screen.
•
HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
o
Black bars on the top and bottom will appear during movies that have aspect ratios differentfrom
your TV.
Adjust the picture size options on your external device or TV to full screen.
Network Connection
Others
o
The remote control does not work.
•
o
Tile TV is making a humming noise.
Replace the remote control batteries with correct the poles (+/-) in the right direction.
Clean the sensor's transmission window on the remote.
@
Try pointing the remote directly at the TVfrom 5-_6feet away.
o
Plasma Tk/s typically make a soft humming sound. This is normal. It's caused by the electrical charges
that are used to create the images on the screen.
If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
brightness lower.
You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard
surface. Also try rerouting your connection cables.
Improper installation of wall mount can create excessive noise.
o
o
o
Image Retention (Burn In)Issue.
•
To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.
Pixel Shift technology enables you to set picture movement up/down (VerticalLine) and side to side
(Horizontal Dot).
The cabb/set top box remote control
doesn't turn the Tk/on or off, or adjust the
volume.
•
Program the Cable/Sat remote control to operate the T_ Referto the Cabb/Set user manual for the
SAMSUNG TV code.
A "Mode Not Supported" message
appears,
•
Check the supported resolution of the T_, and adjust the external device's output resolution
accordingly. Refer to the resolution settings on page 12 of this manual.
Caption on TV menu is greyed out.
•
•
Caption can not be selected in the TV menu when connected via HDMI or Component (p. 26).
Caption must be activated on the external device (p. 26).
There is a plastic smell from the T_
•
This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
in the Self Diagnostic Test menu.
•
This function is only availablewith digital channels from an Antenna / RF/Coax connection. (p. 28)
The TV is tilted to the side.
•
Remove the base stand from the TVand reassemble it.
The channel menu is greyed out
(unavailable).
•
The Channel menu is only available when the TV source is selected.
2
English
Your settings are lost after 30 minutes or
every time the TV is turned off.
•
If the TV is in the Store Oemo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
SOURCE button to select -IV mode, and go to MENU -_ Setup -_ Plug & Play _ ENTER _ (p. 8).
You have intermittent loss of audio or
video.
•
•
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the T_
•
This is part of the product's design and is not a defect.
The PiP menu is not available.
•
PIP functionality is only availablewhen you are using a HDMI, PC or components source.
POP (TV'sinternal banner ad) appears on
the screen.
•
Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature. (p. 8)
Some
of above pictures
and functions
are available
at specific
models
only.
Storage and Maintenance
English 63
Other Information
_
_
|
TheaterSeund
TheaterSound, SRS and the _ symbol are trademarks of SRS Labs, Inc,
TheaterSound technology is incorporated under license from SRS Labs, Inc.
DOLBY
Manufactured under license from Dolby Laboratories, Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DIGITAL PLUS }
PULSE I
Manufactured
_!_
6,487,535
2.0+DigitalOut
registered
Product
under license
& other
trademarks.
Includes
under U.S. Patent #'s: 5,451,942;
U.S. and worldwide
& DTS 2.0+
software.
patents
issued
5,956,674;
& pending.
5,974,380;
DTS and the Symbol
Digital Out and the DTS Iogos are trademarks
5,978,762;
are
of DTS, Inc.
@ DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT D]VXVIDEO: DivX® b a digital vkJeoformat created by DivX,[nc. Tills is an official DivXCertified devbe tllat plays DivXvideo. Vb[t www.divx.
com for more information and software tools to convert your fibs into DivXvideo.
ABOUT D]VXVIDEO-ON-DEMAND: Ttlis [email protected] must be registered in order to play D[vXVideo-on-Demand (VOD) content.
To generate the regbtration code, locate tile D[vXVOD section in tile device setup menu.
Go to vod.divx.com wkll thb code to complete the registration process and learn more about DivXVOD. Pat. 7,295,673; 7,460,688; 7,519,274
Open
Source
License
Notice
In the case of using open source software,
Open Source
License
Notice
is written
Open Source
Display Resolution
Environmental Considerations
With stana
We_gn_
W_thout Stana
With Stand
menu.
_20°_ 20°
50 inches
(49.9 inches measured diagonally)
10WX2
Dimensions _NxDxHI
Bod,
on the product
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel (Left/ Right)
Sounc
OutPut/
are available
1920 x 1080
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Screen Size
Diagonal
Licenses
only English.
58 inches
(58.0 inches measured diagonally)
15WX2
63 inches
(62.9 inches measured diagonally)
15WX2
47.7 X 1.4 X 29.5 inches
(1211.0 X 35.9 X 749.0 mm)
47.7 X 8.9 X 31.8 inches
54.6 X 1.4 X 33.4 inches
(1388.0 X 35.9 X 849.0 mm)
54.6 X 13.5 X 35.6 inches
59.0 X 1.4 X 35.9 inches
(1498.0 X 35.9 X 911.0 mm)
59.0 X 13.5 X 38.0 inches
(1211.0 X 227.0 X 808.5 mm)
(1388.0 X 342.0 X 905.0 mm)
(1498.0 X 342.0 X 964.5 mm)
54.0 Ibs (24.5 kg)
64.4 Ibs (29.2 kg)
73.4 bs (33.3 kg)
88.2 bs (40.0 kg)
83.8 bs (38.0 kg)
98.3 bs (44.6 kg)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For information about power supply, and more about power consumption, refer to the label attached to the product.
4
English
Ill Front
view/ Side
view
O
F
//
(Unit: inches)
Ill
PN50C7000
47.7
43.7
24.6
24.7
29.5
31.8
1.4
8.9
PN58C7000
54.6
50.7
28.6
24.7
33.4
35.6
1.4
13.5
PN6307000
59.0
55.0
31.0
24.7
35.9
38.0
1.4
13.5
Jack panel detail / Rear view
(Unit: inches)
PN50C7000
15.7
15.7
32.7
13.6
3.8
12.4
2.5
PN58C7000
23.6
15.7
40.1
13.4
4.4
11.0
3.6
PN6307000
23.6
15.7
43.8
13.6
4.7
11.0
4.0
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
@ 2010 Samsung Electronics America, Inc
English 65
Other Information
A
F
R
AIIShare
54
FA_I,©Hbutton
Receiver
45
Amplify
Antenna
22
14
Favorite Channel
Film Mode
7, 14
14
19
Recording
Remote Control
45
7
Anynet+
43
Fine Tune
16
Repeat Mode
42
AUDIO OUT
11
Flesh Tone
17
RGB Only Mode
17
Auto Adjustment
Auto Volume
22
23
Frequency
12
Rotate
42
H
B
HDMI
Background Music
42
Balance L/R
22
Basic View
41
Batteries
Black Tone
7
17
Blanking Bracket
56
Brightness
16
S
Select All
15
Self Diagnosis
28
Sharpness
16
I
Signal Information
28
..................................................................
Installation Space
58
[email protected]
47
Sleep Timer
Slide Show
24
41
Software Upgrade
28
Source List
Speaker Select
13
23
Specifications
64
Home Theater
9, 43
11,43
L
C
Language
26
Cable...................................................................................................................................................................................
Tie
4, 56
License
64
Standby mode
Symbol
Change PIN
25
M
Channel Menu
14
Clock
23
Color Tone
18
Component
10
Connecting to a PC
Connecting to an Audio Device
6
3
T
Media Play
Melody
36
27
Timer
24
12
Menu Transparency
Mono
27
23
Title
Tools
41
3
11
Music
40
Troubleshooting
TV Speaker
60
23
D
N
..............................................................................................................................................................................
U
DIGITAL AUDIO OUT
DivX® VOD
11,43
42
Navigate
Network Connection
13
29
30
D-sub
Dynamic
12
16
Network Setup
Dynamic Contrast
17
O
V
ON/OFF button
E
..........................................................................................
use Drive
28, 36
Optimal resolution
7
12
Video Formats
39
Videos
38
Volume
6
Eco Sensor
Edit Name
16
13
Editing Channels
15
Energy Saving
16
Password
48
Wall Mount
57
Equalizer
22
Photos
41
Warm
18
23
Picture Size
White Balance
17
Widget
52
External Speaker
PIP (Picture in Picture)
Plug & Play
Power Indicator
6
English
W
P
18, 42
27
8
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement