Polaroid PLA-4205 Operating instructions

Polaroid PLA-4205 Operating instructions
42” Plasma Monitor
PLA-4205
Operating Manual
20050502
Table of Contents
Important Information..................................................................................................1
Important Safety Precautions......................................................................................2
Preparations................................................................................................................5
Identification of Controls..............................................................................................7
Connections ..............................................................................................................10
Turning the Unit On and Off ......................................................................................16
Basic Operations.......................................................................................................17
Setting Picture...........................................................................................................18
Changing Screen Options.........................................................................................19
Setting Sound ...........................................................................................................21
Setting System..........................................................................................................23
Changing Screen Layout ..........................................................................................24
PIP Operations..........................................................................................................25
Viewing Closed Captions ..........................................................................................26
Adjusting Parental Control Settings ..........................................................................27
Troubleshooting ........................................................................................................31
Specifications............................................................................................................33
Programming the Universal Remote Control ............................................................35
Important Information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating
instructions unless you are qualified to do so.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due
to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance:
www.eia.org
FCC STATEMENT
FCC Notice
PDP Monitor: A CLASS B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by the
manufacturer could cause harmful interference and would void the user's authority to operate this device.
WARNING: This is a CLASS B product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures to counter interference.
1
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions
when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your PDP monitor product, please
read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Do not use this apparatus near water---for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
6. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Ventilation---Do not block any ventilation openings. Install in accordance with the
manufacturer instructions. The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient ventilation
can cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
8.Heat sources---Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.Grounding or Polarization---Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the
manufacturer. Use of improper attachments can result in accidents.
2
Important Safety Precautions (continued)
12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting inserious personal
injuries as well as damage to the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
13. Move carefully---When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces
can cause the product to fall from the trolley.
14. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of
time.
For added protection for this television equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
15. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
16. Replacement parts---In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
17.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
18.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltage flows in the product,
and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
19.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product
indicates that the product needs servicing.
20.Safety checks---Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
21.Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method
recommended by the manufacturer. This is a safety feature.
3
Important Safety Precautions (continued)
22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a
lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with another power
supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment
and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When connecting other products such
as VCRs and personal computers, you should turn off the power of the unit for protection against electric shock.
23.Panel protection---The PDP panel used in this product is made of glass. Therefore, it can break
when the product is dropped or impacted upon by other objects. Be careful not to be injured by
broken glass pieces in case the PDP panel breaks.
24.Pixel defect---The PDP panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active
pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
4
Preparations
Using the Remote Control
<Use the remote control by pointing it towards the remote sensor window of the set. Objects between
the remote control and sensor window may prevent proper operation.
Note: This illustration is for reference only. The remote sensor may be in different locations on
different models.
30
30
5m
Cautions regarding use of remote control
<Do not expose the remote control to shock. In addition, do not expose the remote control to liquids,
and do not place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or PDP monitor set, or operate the remote control closer to the remote sensor window.
Batteries for the Remote Control
1 Open the battery cover.
2
Insert two size-AA batteries.
3
Replace the cover.
<(Place the batteries with their terminals
corresponding to the (+) and (–) indications
in the battery compartment.)
-
+
+
-
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak
chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found,
wipe with a cloth.
<The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
<If the remote control is not used for an extended period of time, remove the batteries from the remote control.
5
Preparations (continued)
Power connection
Household
power outlet
Plug into AC outlet.
AC cord
AC - INPUT
1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note:
<This product should be operated only from the type of power source indicated on the marking label.
<Always unplug the AC cord from power outlet when not using for a long period of time.
Speaker connection
SPEAKER
R
CONTROL
L
D - SUB
DVI
AUDIO
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
Cb /Pb
Cr /Pr
AUDIO
COMPONENT INPUT 2
Y
Cb /Pb
Cr /Pr
AUDIO
HEADPHONE AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
RF
SVHS
AC - INPUT
L AUDIO R
(Black)
(Black)
(Red)
(Red)
Right
Left
speaker speaker
Connect the speaker audio cable to
the external speaker output jack on
the unit matching the "+" and "-" ends
of the cable with color.
Note: the illustration may be different depending on model.
6
Identification of Controls
Main unit (front view)
MENU
SOURCE MENU
VOL
VOL
REMOTE SENSOR
POWER INDICATOR
A blue indicator lights when the power is on and a red
indicator lights when in the standby mode.
BOTTOM VIEW
MENU
VOL
POWER ON/STANDBY
DOWN/UP
MENU
VOLUME DOWN/UP
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2. MENU
Press this button to access the MENU main page.
3. Volume 3/4
Press the VOL 4 or VOL3button to directly increase or decrease the sound volume level.
In OSD Menu, press these buttons to adjust the value or setting of each item
4. 5/6
In OSD Menu, press these buttons to choose the OSD items.
Note:
POWER
, VOL3/4, 5/6 and MENU on the main unit have the same functions as the corresponding buttons on the remote
control.
This operation manual provides a description based on operating functions with the remote control.
7
Identification of Controls (continued)
Main unit (rear view)
AC power
input socket
Speaker output jacks
SPEAKER
L
R
AC - INPUT
CONTROL
SPEAKER
R
CONTROL
- SUB
DD-SUB
DVI
AUDIO
PIC
AUDIO
D - SUB
DVI
AUDIO
L
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
COMPONENT INPUT 1
PIC
Y
Cr /Pr
Cb /Pb
AUDIO
Cb /Pb
Cr /Pr
COMPONENT INPUT 2
AUDIO
Y
Cb /Pb
Cr /Pr
AUDIO
HEADPHONE
AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
RF
SVHS
AC - INPUT
L AUDIO R
COMPONENT INPUT 2
Y
Cr /Pr
Cb /Pb
HEADPHONE
AUDIO
AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
1
2
3
4
5
6
7
8
9
1. RS232 terminals
For service use only. The user cannot operate the unit through the RS232 terminals.
2. DVI input /Audio in
Receives the digital video/audio signals from a set top box or PC.
3. VGA input /Audio in
Connect to the VGA/audio output jacks on your PC.
4. Component inputs 1 (Y, Pb/Cb, Pr/Cr, Audio)
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
5. Component inputs 2 (Y, Pb/Cb, Pr/Cr, Audio)
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
6. Headphone jack
7. AV outputs (Video, Audio L, R)
Connect to the VCR input jacks to record programs.
8. AV inputs (Video, Audio L, R)
Receive video/audio signals from external sources such as VCR or DVD player.
9. S-Video input
Receive a S-Video signal from external source such as VCR or DVD player.
8
Identification of Controls (continued)
Remote Control
2
1
3
4
5
6
7
8
9
10
11
12
13
14
16
15
17
9
1. To select products to be controlled with remote control
Note: This remote control is an universal remote control. If your remote
control does not work correctly when you operate the PDP monitor, please
try to press TV button.
2. POWER
Turn the unit on or off
3. INPUT
To access source input select menu
4. CH+/To move upward or downward in menu operation
5. VOL+/Used to adjust volume.
To move left or right in menu operation;
To adjust selected menu item in menu operation;
6. MUTE
Sound mute
7. MENU
To access the Menu main page or exit menu operation
8. Menu navigation button: 5634
56: To move upward or downward in menu operation;
To adjust zoom rate in ZOOM mode and pan picture in PAN
mode;
To select picture frame in multi-picture mode, the selected
picture frame displays with a green border;
34: To move left or right in menu operation;
To adjust selected menu item in menu operation;
To pan picture in PAN mode;
OK button: To confirm, enter submenu or toggle between the settings
of the selected menu item.
9. EXIT
Used to exit the current menu and return to upper level menu.
10. DISPLAY
To display channel status or signal information
11. SLEEP
To access Sleep timer setting menu
12. STEREO
To select STEREO, SAP or MONO
13. PICTURE MODE
To access picture mode select menu
14. SOUND MODE
To access sound mode select menu
15. PIP
To activate picture in picture
16. PIP INPUT
To access source input select menu
17. SIZE
To access PIP frame size adjusting menu
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the user manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
NOTE: Due to variances in DVI with HDCP (High-bandwidth Digital Content Protection) standards associated with cable and satellite
boxes, Polaroid recommends using the Component Video (YPbPr) outputs from your cable/satellite box. Polaroid recommends
reserving the DVI input for other sources which also have DVI outputs (i.e. DVD players, PCs).
Connect a VCR
CONTROL
- SUB
DD-SUB
DVI
AUDIO
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
Cr /Pr
Cb /Pb
COMPONENT INPUT 2
AUDIO
Y
Cb /Pb
Cr /Pr
HEADPHONE
AUDIO
AV INPUT
AV OUTPUT
VIDEO
L AUDIO R
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
Y
Y
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
R
W
or
Video
cable
Audio
cable
Y
W
S-video
cable
R
VCR
ANT OUT
AV OUT
VIDEO
L AUDIO R
S - VIDEO
ANT IN
AV IN
VIDEO
L AUDIO R
Rear of the VCR
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-video terminal if your source supports it.
When you use S-video terminal, the source menu displays SV instead of AV.
The S-Video is prior to Video terminal when they are connected at the same time.
To play VCR
1. Turn on your PDP monitor , press INPUT button on the remote control.
2. Press 3/4 to select AV (VIDEO) and press OK to confirm.
3. Turn on your VCR , insert a videotape and press the Play button.
source
A D C1 C2 AV
VIDEO
10
Connections (continued)
Connect a Camcorder
CONTROL
- SUB
DD-SUB
DVI
PIC
AUDIO
AUDIO
COMPONENT INPUT 1
PIC
Y
Cb /Pb
Cr /Pr
COMPONENT INPUT 2
AUDIO
Y
Cb /Pb
Cr /Pr
HEADPHONE
AUDIO
AV INPUT
AV OUTPUT
VIDEO
L AUDIO R
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
Y
Y
W
R
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
Video
cable
Y
VIDEO
Audio
cable
W
OUT
IN
R
L AUDIO R
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your PDP monitor , press INPUT button on the remote control.
2. Press 3/4 to select AV (VIDEO) and press OK to confirm.
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
4. Insert the tape into the camcorder and press Play button.
Note:
The operations of the camcorder may be different and is dependant on your model.
Please read the user manual of your camcorder to confirm operation.
source
11
A D C1 C2 AV
VIDEO
Connections (continued)
Connect a DVD player
CONTROL
- SUB
DD-SUB
DVI
AUDIO
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
Cr /Pr
Cb /Pb
COMPONENT INPUT 2
AUDIO
Y
Cr /Pr
Cb /Pb
AUDIO
HEADPHONE
AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
G
W
B
R
white (audio L)
R red (audio R, Pr /Cr )
Video
cable
G Green (Y)
Audio
cable
B Blue (Pb /C b )
R
B
G
R
W
DVD player
COMPONENT
AUDIO
Pb
L AUDIO R
Pr
Y
AV OUT
R AUDIO L
VIDEO
S - VIDEO
Rear of the DVD player
How to connect a DVD Player using Component Video Connections:
Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Y, Cb, Cr output jacks on the DVD player.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.
To play DVD
1. Turn on your PDP monitor , press INPUT button on the remote control.
2. Press 3/4 to select C1(YPbPr1/YCbCr1) or C2(YPbPr2/YCbCr2).
3. Press OK to confirm.
4. Turn on your DVD player, insert a DVD disc and press the Play button.
source
A D C1 C2 AV
YPbPr1/YCbCr1
Note:
This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the screen displays YCbCr
detected on the bottom-right corner. Similarly, if the component video terminals are Y, Pb, Pr, the screen displays YPbPr detected on the
bottom-right corner.
12
Connections (continued)
Connect a DTV receiver
CONTROL
- SUB
DD-SUB
DVI
AUDIO
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
Cr /Pr
Cb /Pb
COMPONENT INPUT 2
AUDIO
Y
Cr /Pr
Cb /Pb
HEADPHONE
AUDIO
AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
L AUDIO R
BOTTOM VIEW
G
W
B
R
white (audio L)
R red (audio R, Pr /Cr )
Video
cable
G Green (Y)
Audio
cable
B Blue (P b /Cb )
R
B
G
R
W
COMPONENT
AUDIO
Pb
L AUDIO R
Pr
Y
AV OUT
R AUDIO L
VIDEO
S - VIDEO
ANT
DVI
Rear of the DTV receiver
How to connect:
Connect the cable or antenna to the antenna input jack on the DTV receiver.
Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DTV receiver .
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DTV receiver.
To Watch DTV
1. Turn on your PDP monitor , press INPUT button on the remote control.
2. Press 3/4 to select C1(YPbPr1/YCbCr1) or C2(YPbPr2/YCbCr2).
3. Press OK to confirm.
4. Turn on your DTV receiver.
source
A D C1 C2 AV
YPbPr1/YCbCr1
13
SVHS
Connections (continued)
Connect a PC
CONTROL
- SUB
DD-SUB
DVI
AUDIO
PIC
AUDIO
COMPONENT INPUT 1
PIC
Y
Cb /Pb
Cr /Pr
AUDIO
COMPONENT INPUT 2
Y
Cb /Pb
Cr /Pr
AUDIO
HEADPHONE
AV OUTPUT
VIDEO
L AUDIO R
AV INPUT
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
or
DVI
cable
VGA
cable
Audio
cable
How to connect:
Connect a VGA (or DVI) cable between the VGA (or DVI) jack on the PC and the VGA (or DVI) input jack on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
To Watch the PC screen
1. Turn on your PDP monitor , press INPUT button on the remote control.
2. Press 3/4 to select A (VGA) or D (DVI).
3. Press OK to confirm.
4. Turn on your PC and check for PC system requirements.
5. Adjust the PC screen.
source
A D C1 C2 AV
VGA
Note:
Some playback devices with DVI interface have different understandings to the HDCP protocols and which may lead to mistakes during
transferring data stream. In this case, you may find a noisy picture while viewing programs from DVI interface. So if you encounter a noisy
picture, please try to restore a normal picture by restarting the playback device.
14
Connections (continued)
Connect a VCR (for recording) or external amplifier
CONTROL
- SUB
DD-SUB
DVI
PIC
AUDIO
AUDIO
COMPONENT INPUT 1
PIC
Y
Cr /Pr
Cb /Pb
COMPONENT INPUT 2
Y
AUDIO
Cb /Pb
Cr /Pr
HEADPHONE
AUDIO
AV INPUT
AV OUTPUT
VIDEO
L AUDIO R
VIDEO
SVHS
L AUDIO R
BOTTOM VIEW
Y
Y
W
R
Audio
cable
R
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
Audio
cable
R
W
Video
cable
W
Y
VCR for recording
To Audio inputs
ANT OUT
AV OUT
R AUDIO L
VIDEO
S - VIDEO
ANT IN
AV IN
R AUDIO L
External Amplifier
VIDEO
Rear of the VCR
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
- or -
Connect the Audio cables between the Audio (L/R) jacks on the unit and external amplifier.
To record program
1. Turn on your PDP monitor, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
To enjoy high-quality sound through an external amplifier
1. Turn on your PDP monitor, select a program.
2. Turn the main volume of the amplifier to minimum.
3. Turn on the amplifier and adjust for a proper volume.
Note:
The operations of the amplifier may be different depending on model. Please read the user manual of your amplifier to confirm proper
operation.
The AV output terminals output audio/video signal inputted from Antenna input or AV inputs.
15
Turning the Unit On and Off
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power button on the remote control.
The unit will be turned on and you will be ready to use it's features.
Turning Off
With the power on, Press the Power
button on the remote control to turn off.
Note:
You can also use the Power button on the Control panel on the main unit.
Viewing the Menus and Displays
Your PDP monitor has a simple, easy-to-use menu system that appears on the
screen. This system makes it convenient and fast to use features on the unit.
Viewing the Menus
1
With the power on, press the MENU button on the remote control. The main
menu appears on the screen.
2
In MENU operations, use the 5/6to select menu item. Use 3/4 to adjust
value or setting of each item. Use OK to confirm or access items of menu.
On-screen menu will disappear from the screen automatically after about 15
seconds, or you can press the MENU button repeatedly to exit the menu.
picture
brightness
contrast
sharpness
color
tint
50
50
50
50
12
down for picture settings for current window
Note:
To clearly introduce the menu operations , this operation manual provides a
description based on operation with the remote control.
3
In MENU operations, the CH+/- buttons have the same function with the
5/6buttons, the VOL+/- buttons have the same function with the 3/4
buttons; the ENTER button has the same function with the OK button.
Displaying Status Information
Press the DISPLAY button on the remote control, the unit will display current status information such as channel number, audio mode or
signal source, etc.
16
Basic Operations
Adjusting the Volume
Using the volume buttons (VOL-and VOL+)
Press the VOL +or VOL- to increase or decrease the volume.
Using the Mute
Using the MUTE button
At any time, you can temporarily turn off the sound using the MUTE button.
1
2
Press the MUTE button and the sound turns off.
To turn mute off, press the MUTE button again, or simply press either the VOL - or VOL+.
Select input source signal
Using the INPUT button
1
2
3
Press the INPUT button to access source menu.
Press 3 or 4 to select a desired input channel.
Press OK to confirm and the unit display signal from the selected input channel.
A ----------VGA, select signal from VGA (15-pin D-sub) terminals.
D ----------DVI, select signal from DVI terminals.
A D C1 C2 AV
source
C1 --------YPbPr1/YCbCr1, select signal from YPbPr1/YCbCr1 terminals.
VGA
C2 --------YPbPr2/YCbCr2, select signal from YPbPr2/YCbCr2 terminals.
AV --------VIDEO (SVIDEO), select signal from S-Video or Video terminal.
The S-Video is prior to Video terminal when they are connected at the same time.
Note:
This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the screen displays YCbCr
detected on the bottom-right corner. Similary, if the component video terminals are Y, Pb, Pr, the screen displays YPbPr detected on the
bottom-right corner.
Using source select menu
1
2
3
4
5
6
17
Press MENU to display the menu main page.
Press 3/4 to display settings menu page.
Press 6repeatedly to select source select item.
Press 4 to access source select menu.
Press 5 or 6 to select a desired input channel.
Press OK to confirm and the unit displays signal from the selected input
channel.
settings
opaque
menu background
language
English
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
right/left to source select
Setting Picture
Customizing the Picture
1
Press MENU to display the menu main page.
If the picture menu does not display, press 3/4 repeatedly to display
picture menu page.
2
3
4
Press 5/6to select the item you wish to change.
picture
brightness
contrast
sharpness
color
tint
50
50
50
50
12
Press 3/4 to adjust the value of the item.
Press MENU to exit.
down for picture settings for current window
Using the Preset Picture Mode
1
2
3
Press PICTURE MODE to display picture mode select menu.
Press 3/4 to select a desired picture mode.
Press MENU to exit.
There are three preset picture modes (Normal, Bright and Soft) and one
user-set picture mode (User).
Each preset mode has its own picture settings.
Normal: Select for a normal picture.
Bright: Select for a bright picture.
Soft: Select for a fine/soft picture.
Adjusted settings are stored in User mode.
Picture mode
menu to return
Normal
right/left to adjust
Adjusting Picture in VGA Mode
1
Press MENU to display the menu main page.
If the picture menu does not display, press 3/4 repeatedly to display
picture menu page.
2
Press 5/6to select brightness or contrast item.
3
Press 3/4 to adjust the value of the item.
picture
brightness
contrast
phase
frequency
50
50
50
50
right/left to adjust brightness
Adjusting the Phase and Frequency in VGA Mode
1
Press MENU to display the menu main page.
If the picture menu does not display, press 3/4 repeatedly to display
picture menu page.
2
Press 5/6to select phase or frequency item.
3
4
Press 3/4 to adjust the value of the item.
Press MENU to exit.
picture
brightness
contrast
phase
frequency
50
50
50
50
right/left to adjust phase
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring ,
you can obtain a clearer image by adjusting the phase setting.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in
the image, try adjusting the frequency setting.
18
Changing Screen Options
Changing the Scaling mode of Image
1
Press MENU to display the menu main page.
2
Press 3/4 to display window menu page.
3
Press 6 to select image size item.
4
Press 3/4 to select a proper image size.
The image size can be selected between: fill all, normal, wide and zoom .
window
image size
h position
v position
freeze window
digital pan and zoom
fill all
50
50
off
on
right/left to change image size
Fill All
The Fill All mode stretches the input vertically and horizontally to fill the display from edge to edge. This mode is the default mode.
Normal
The Normal mode fills the display vertically with a 4:3 aspect picture, preserving the geometry of the input format. It performs the same
as the Fill to Aspect Ratio mode..
Wide
The Wide mode only affects displays that are greater than 4:3 aspect. If the picture is less than or equal to 4:3, this mode acts as if it is
in Normal mode. It is intended to display 4:3 images on a 16:9 panel with the least picture deformity. The center of the picture is left
unstretched. The left and right sides of the picture are stretched in a non-linear fashion with the areas of greatest distortion on the
extreme left and right edges of the picture. The top and bottom five percent of the picture are cropped.
Zoom
If the display aspect ratio is greater than 4:3, this mode fills the panel horizontally, cropping 10 percent off the top and bottom of the
picture. If the display aspect ratio is less than 4:3, this mode crops the picture by 16.5 percent on all sides and fills the panel with the
remaining picture.
Freezing the Picture
1
Press MENU to display the menu main page.
2
Press 3/4 to display window menu page.
3
Press 6repeatedly to select freeze window item.
4
Press 3/4 to select on or off.
When you set this item to on, the current picture will be frozen until you set
this item to off.
Note:
This menu item appears only when the current screen layout is full screen.
19
window
image size
h position
v position
freeze window
digital pan and zoom
fill all
50
50
off
left/right to freeze current window
on
Changing Screen Options (continued)
Changing the Position of the Image
The unit allows you to adjust the position of the image if it is not well-aligned.
1
2
Press MENU to display the menu main page.
Press 3/4 to display window menu page.
3
Press 6repeatedly to select h position or v position item.
4
Press 3/4 to adjust until the picture is well-aligned.
window
image size
h position
v position
freeze window
digital pan and zoom
fill all
50
50
off
on
right/left to adjust h position
Using Digital Pan and Zoom
1
2
3
4
5
Press MENU to display the menu main page.
Press 3/4 to display window menu page.
Press 6repeatedly to select digital pan and zoom item.
window
image size
h position
v position
freeze window
digital pan and zoom
fill all
50
50
off
on
Press 4to enter.
select to activate digital zoom control
Press 5/6to adjust zoom ratio.
Note:
You can quickly access Zoom menu by using the ZOOM button.
Digital pan and zoom are not always available.
1.00
up/down to zoom
<select> for pan
menu to exit
The unit allows you to pan the picture after you zoom in the picture
1
2
3
Repeat steps 1~5 above to zoom in the picture.
Press OK to access Pan mode.
12.34
arrow keys to pan
<select> for zoom
menu to exit
Press 3/4 or 5/6to pan the current picture in the relevant direction.
Adjusting the Picture Automatically
1
2
3
4
Press MENU to display the menu main page.
window
Press 3/4 to display window menu page.
Press 6repeatedly to select auto adjustment item.
Press 4 to start auto adjustment.
If you are not satisfied with the picture , you may quickly adjust the picture by
using the auto adjustment item.
After the auto adjustment is started, the message "Auto running" appears
on the screen and the picture adjustments are automatically activated.
image size
h position
v position
freeze window
digital pan and zoom
auto adjustment
fill all
50
50
off
on
right/left to auto adjust
20
Setting Sound
Using the Preset Audio Mode
1
Press MENU to display the menu main page.
2
Press 3/4 to display audio menu page.
3
4
audio
Press 6to select Audio mode item.
Press 3/4 to select a desired Audio mode.
Note:
You can not access the treble and bass items unless the Audio mode is set to
User.
Audio mode
treble
bass
balance
headphone
MTS
auto volume
Cinema
50
50
50
50
STEREO
off
on
right/left to set audio mode
Customizing the Sound
1
Press MENU to display the menu main page.
audio
2
3
4
Press 3/4 to display audio menu page.
Press 5/6to select treble, bass or balance item.
Press 3/4 to adjust the value of the item.
Audio mode
treble
bass
balance
headphone
MTS
auto volume
User
50
50
50
50
STEREO
off
on
right/left to adjust treble
Using the SOUND MODE button
1
2
3
Press SOUND MODE to display Audio mode select menu.
Press 3/4 to select a desired Audio mode.
Press MENU to exit.
There are three preset Audio modes (Cinema, Music and News) and one
user-set Audio mode (User).
Each preset mode has its own Audio settings.
Cinema: Select for a movie program picture.
Music: Select for a music program.
News: Select for a speech or conversation program.
Adjusted settings are stored in User mode.
Audio mode
menu to return
Cinema
right/left to adjust
Adjusting the Headphone Volume
1
Press MENU to display the menu main page.
audio
2
3
4
21
Press 3/4 to display audio menu page.
Press 6repeatedly to select headphone item.
Press 3/4 to adjust the volume of headphone.
Audio mode
treble
bass
balance
headphone
MTS
auto volume
Cinema
50
50
50
50
STEREO
off
on
right/left to adjust headphone
Setting Sound (continued)
Choosing a Multi-Channel Sound (MTS) Soundtrack
1
Press MENU to display the menu main page.
audio
2
3
4
Press 3/4 to display audio menu page.
Press 6 repeatedly to select MTS item.
Press 3/4 to select STEREO, SAP or MONO.
Audio mode
treble
bass
balance
headphone
MTS
auto volume
Cinema
50
50
50
50
STEREO
off
on
right/left to set stereo
Choose STEREO for channels that are broadcasting in stereo.
Choose MONO for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation of a program.
Using the STEREO button
1
Press the STEREO button to access MTS setting menu.
2
Press 3/4 to select STEREO, SAP or MONO.
3
Press MENU to exit.
MTS
menu to return
STEREO
right/left to adjust
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is
changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation
signal is high or by raising the sound output when the modulation signal is low.
1
Press MENU to display the menu main page.
audio
2
3
4
Press 3/4 to display audio menu page.
Press 6repeatedly to select Auto volume item.
Press 3/4 to select on or off.
Audio mode
treble
bass
balance
headphone
MTS
auto volume
Cinema
50
50
50
50
STEREO
off
on
right/left to set auto volume
22
Setting System
Setting the Menu Background
1
2
3
4
Press MENU to display the menu main page.
Press 3/4 to display settings menu page.
Press 6to select menu background item.
Press 3/4 to select opaque or translucent.
settings
translucent
menu background
english
language
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
right/left to change menu background
Selecting a MENU language
1
2
Press MENU to display the menu main page.
3
4
Press 6twice to select language item.
5
settings
Press 3/4 repeatedly to display settings menu page
Press 3/4- to select the appropriate language: English, French and
Spanish.
Press MENU to exit.
opaque
menu background
English
language
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
right/left to change language
Setting Sleep Timer
1
2
Press the SLEEP button to display sleep time menu.
3
Press MENU to exit.
Press 3/4 to adjust.
Sleep time
menu to return
23
off
right/left to adjust
Changing Screen Layout
Selecting Screen Layout
Using the Layout Menu
1
Press MENU to display the menu main page.
2
Press 3/4 to display layout menu page.
3
Press 5/6 to select item.
4
Press 4or OK to confirm.
layout
full screen
pip
split screen
pop3
down for current screen layout options
Full Screen
When this item is selected, only main frame displays on the screen.
Main Frame
PIP
When this item is selected, one main frame and one PIP frame display on
the screen at the same time.
Main Frame
PIP Frame
Split Screen
When this item is selected, the screen will be split into two frames.
Main Frame
Split Frame
POP3
2
When this item is selected, one main frame and three scanning frames display on
the screen.
Main Frame
Scanning
Frame
3
4
24
PIP Operations
Viewing the Picture-in-Picture
1
Press MENU to display the menu main page.
2
Press 3/4 to display layout menu page.
3
Press 6twice to select pip item.
4
Press 4 or OK to display pip frame.
The screen displays one main frame and one PIP frame.
5
Press 5or6to select main frame or PIP frame.
layout
full screen
pip
split screen
pop3
grid
select activates pip window layout
Main Frame
The selected frame displays with a green border.
Note:
4You can quickly open or close PIP frame by directly using the PIP button.
4Many but not all adjustments and settings can be applied to the PIP picture
when the PIP frame is selected.
4To cancel PIP frame, press the PIP button or select the full screen item and
confirm.
4The PIP audio is only output through the headphone jack.
PIP Frame
Adjusting the Size of PIP Frame
1
2
3
4
5
With the PIP frame displaying, press MENU to display the menu main page.
Press 3/4 to display window menu page.
Press 6repeatedly to select pip size item.
window
image size
h position
v position
pip size
pip position
fill all
50
50
12
Press 3/4 to adjust the size of PIP frame.
Press MENU to exit.
right/left to adjust PIP size
Note:
You can the SIZE button to quickly access the pip size adjusting menu.
Changing the Position of the PIP Frame
1
With the PIP frame displaying, press MENU to display the menu main page.
2
Press 3/4 to display window menu page.
3
Press 6repeatedly to select pip position item.
4
Press 3/4 to select a desired position for the PIP frame.
window
image size
h position
v position
pip size
pip position
fill all
50
50
12
right/left to adjust PIP position
NOTE:
If PIP, Split Screen, or POP3 is turned off in DVI input mode and the input changes to VGA, go to the Input Menu (page 17)
and switch the input to DVI.
25
Viewing Closed Captions
The Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Note:
The Caption feature only works in AV mode.
Not all the programs and videos will offer closed captioning. Please look for the
symbol to ensure that captions have been provided.
Setting Closed Caption
1
Press MENU to display the menu main page.
2
Press 3/4 to display settings menu page.
3
Press 6 repeatedly to select close caption item.
4
Press 3/4 to select off, on or on mute item.
Off---Turn off the closed caption. If you select off, the close caption mode
and close capt. background can not be accessed.
On---Turn on the closed caption.
On Mute---Turn on the closed caption when mute. If you select on mute, the
close caption mode and close capt. background can not be
accessed unless you mute the sound.
settings
opaque
menu background
English
language
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
right/left to control close caption
settings
5
6
Press 5to select close caption mode item.
Press 3/4 to select a desired mode.
opaque
menu background
English
language
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
You can select between cc1, cc2, t1, t2, cc3, cc4, t3 and t4.
The Closed Caption broadcasts can be viewed in two modes: CAPTION and
right/left to select close caption mode
TEXT. For each mode, four channels are available.
The [CAPTION] mode shows subscripts of dialogues and commentaries of video programs while allowing a clear view of the picture.
The [TEXT] mode displays various information over the picture that is independent of the video programs.
Setting the Background of Closed Caption
1
Press MENU to display the menu main page.
2
Press 3/4 to display settings menu page.
3
Press 6repeatedly to select close capt. background item.
4
Press 3/4 to select opaque or transparent.
settings
opaque
menu background
English
language
close caption mode
cc1
close caption
off on on mute
opaque
close capt. background
source select
right/left to select close caption background
26
Adjusting Parental Control Settings
Parental Control
This function allows video programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
Restriction of video programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental
Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
Since a video program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
[1] Movie Rating (MPAA)
Rating
age
based
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17
NO ONE 17 AND UNDER ADMITTED.
X
X Rating is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
NR
NOT RATED.
Note:
The Movie rating is only age-based.
Example 1:
“PG-13” in the age based rating is blocked, this will automatically block the higher
ratings “R”, “NC-17”, “X” also.
Movie blocking
select to adjust movie blocking level, menu to return
Example 2:
“R” in the age based rating is blocked, this will automatically block
the higher rating “NC-17”, “X” also.
Movie blocking
select to adjust movie blocking level, menu to return
27
Adjusting Parental Control Settings (continued)
[2] TV Parental Guidelines
Rating
content based
D
L
V
S
FV
TV-Y (All children)
TV-Y7 (Direct to Older Children)
age TV-G (General Audience)
based
TV-PG (Parental Guidance Suggested)
TV-14 (Parents Strongly Cautioned)
TV-MA (Mature Audience Only)
Content Rating can be set but this Rating is not normally
broadcast by TV Station.
Content Rating can be set.
D: Sexually Suggestive Dialog
L: Adult Language
S: Sexual Situation
V: Violence
FV: Fantasy Violence
Note:
Age-based ratings can be modified by the content-based ratings but only in the combinations indicated by an =in the table above.
Choosing lower age-based rating blocks the higher age-based ratings regardless of content ratings settings.
Example 1:
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block
the higher ratings: TV-G, TV-PG, TV-14 and TV-MA.
tv blocking
select to adjust tv blocking level, menu to return
Example 2:
When TV-14 in the age-based rating is set to BLOCK, this will automatically block
the higher ratings: TV-MA.
In addition, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14
and TV-MA will automatically be blocked.
tv blocking
select to adjust tv blocking level, menu to return
28
Adjusting Parental Control Settings (continued)
Accessing the Parental Control Menu
1
Press MENU to display the menu main page.
2
Press 3/4 to display options menu page.
3
Press 6to select content blocking item.
4
Press 4 or OK to display password menu page.
5
Press 6to select enter item.
6
Input the password and highlight OK.
Use 3/4 to move password digit leftward or rightward.
Use 5/6to select character for password.
options
content blocking
select to activate content blocking menu
password
enter
000000 OK
The default password is 000000, you may change the password yourself.
7
Press OK to access the Parental Control menu.
The unit allows you to access the Parental Control menu if you input the right
password, or you will be denied.
up/down change digit. right/left select digit
Changing the Password
1
From the password menu page, press 6to select change item.
2
Input a new password and highlight OK.
password
enter
change
000000 OK
Use 3/4 to move password digit left or right.
Use 5/6to select character for new password.
3
Press OK to confirm.
up/down change digit. right/left select digit
Be sure to write down your password and retain it for future use.
Note:
The unit provides a master password “666888”. If you forget your password and can’t access Parental Control menu, you may input
the master password to access Parental Control menu. Please set a new password and make sure to remember your password.
29
Adjusting Parental Control Settings (continued)
Adjusting the Movie Rating
1
Repeat steps 1~7 in [Accessing the Parental Control Menu].
2
Press the MENU button.
3
Press 3/4 to display movie blocking menu page.
4
Press 5/6to select a rating to be blocked.
5
Press OK to confirm and MENU to return.
Movie blocking
select to adjust movie blocking level, menu to return
“PG-13” in the age-based rating is blocked, this will automatically block the
higher ratings “R”, “NC-17”, “X” also.
How to unblock a Movie Rating
If you want to unblock a movie rating, please repeat steps 1~3 in [Adjusting the Movie Rating] and use 5/6to select a blocked movie
rating, then press OK to confirm.
Adjusting the TV Rating
1
2
3
4
Repeat steps 1~7 in [Accessing the Parental Control Menu].
5
Press OK to confirm and MENU to return.
tv blocking
Press the MENU button.
Press 3/4 to display tv blocking menu page.
Press 5/6or 3/4 to select an age or content rating to be blocked.
select to adjust tv blocking level, menu to return
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG,
TV-14 and TV-MA.
In addition, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.
Note:
Since a video program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
How to unblock a TV Rating
If you want to unblock a TV rating, please repeat steps 1~3 in [Adjusting the TV Rating] and use 5/6or 3/4 to select a blocked TV
rating (including age rating and content rating), then press OK to confirm.
30
Troubleshooting
Before calling for repair service, check the following items for possible remedies to an encountered
symptom.
Symptoms
Check item
=Check that the
No power
AC power cord is plugged into the mains socket.
=Unplug
the power cord, wait for 60 seconds. Then re-insert plug into the mains
socket and turn on the unit again.
=Check video connections at the rear of the unit to see if it is properly connected to
the unit.
No picture
=Adjust the contrast and brightness settings.
=Select a correct input.
=Is a non-compatible signal being input?
=Increase the VOLUME.
Good picture but no sound
=Check that the unit is not muted.
=Check that the Speaker item in SOUND menu is set to ON.
Good sound but poor color
= Adjust the contrast, color and brightness settings.
=Sometimes, poor picture quality occurs when an activated S-VHS camera or
Poor picture
camcorder is connected while another activated peripheral is connected. In this
case, switch off one of the peripherals.
=Check whether the room is too bright.
=This may be caused by electrical interference (e.g. hairdryer, nearby neon lights,
Horizontal dotted line
etc.).
=Turn off the equipment.
=This remote control is a universal remote control. If the remote control does not
work correctly when operating the monitor, try pressing the TV button.
Remote operation fails.
=Check whether the batteries are working. Replace if necessary.
=Clean the remote control sensor lens on the unit.
=Do not use the remote control under strong or fluorescent lighting.
=The batteries should be inserted with polarity (+, -) aligned.
Snowy picture and noise
=Check the A/V connections.
No stable or not
synchronized VGA picture
=Check if you have selected the correct VGA mode in your PC.
No output from one
of the speakers
=Adjust Balance in the SOUND menu.
Control buttons do not work.
=Unplug the power cord, wait for a few seconds. Then re-plug the power cord and turn
on the unit again.
+ Do not use in hot and cold rooms (locations)
• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the PDP panel to malfunction.
(Storage temperature: 0°C to +50°C Working temperature: 5°C to +40°C )
Note:
If your problem is not solved, turn your unit off and then on again.
Never attempt to repair a PDP monitor yourself.
31
Troubleshooting / Care and Maintenance
Plasma Display panel
Symptoms
Some parts of the screen do not light up.
After-images appear
Check item
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and
images displayed in 4:3 mode.
Note:
The permanent after-image on the Plasma Display resulting from fixed image use is not
an operating defect.
This product is not designed to display fixed images for extended periods of time.
Snapping sounds may be heard from the This sound is produced when the cabinet expands or contracts due to variations in
display unit.
temperature and is not a malfunction.
In DVI input mode, PIP, Split Screen or
POP3 is turned off and the Plasma
Display switches to VGA input mode.
Loss of signal or scrambled picture with
DVI input
Go to the Input Menu (page 17) and switch the input to DVI.
Due to variances in DVI with HDCP (High-bandwidth Digital Content Protection)
standards associated with cable and satellite boxes, Polaroid recommends using the
Component Video (YPbPr) outputs from your cable/satellite box. Polaroid
recommends reserving the DVI input for other sources which also have DVI outputs
(i.e. DVD players, PCs).
Cleaning and Maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a
cleaning cloth or a soft, lint-free cloth.
!If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of
the same type, until the surface is dry.
!Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact
with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be
adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
!If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this
cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
!Do not allow any detergent to come into direct contact with the surface of the Plasma Display.
If water droplets get inside the unit, operating problems may result.
!Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long
periods in contact with articles made from rubber or PVC.
32
Specifications
Type
Display Size diagonal
Display Feature
Resolution
Pixel Pitch
Maximum Colors
Brightness
Contrast
PDP monitor
42” Wide
Viewing Angle
Video Features
Audio Speaker System
Speaker Type
Maximum Audio Output
Stereo Sound System
Mount Support
Power Supply
Power Consumption
Stand by Mode Power Consumption
Unit Weight (lb)
Unit Dimensions (WxHxD) (inch)
Other Features
160o/160o
Progressive Scan
Caption
Security
Remote Control function support for full OSD
features
33
852 X 480
1.095 X 1.110 mm
16,777,000
1000 nit
3000:1
Detachable
10Wx2
BTSC
Wall Mount
AC110-240V 50/60Hz
400W
5W
86
49 x 28.8 x 11.3
Double Screen
Picture in Picture
Sleep Timer
Picture Freeze
Closed Caption
Parental Control
OSD Support English, French, Spanish
Specification (continued)
Terminals
Video In
AV : RCA 75ohms composite video x 1
S-Video : 4-pin DIN x 1
D-Sub 15 x 1
DVI x 1
YPbPr/YCbCr (Support HDTV): RCA 75 ohms x 2
Video Out
RCA 75 ohms
Audio In
L/R RCA for S-Video or AV x 1
Stereo mini phone Jack for PC x 1
Stereo mini phone Jack for DVI x 1
Stereo mini phone Jack for YPbPr/YCbCr x 2
Audio Out
L/R RCA for Video Out x 1
Headphone Jack : Stereo mini phone Jack x 1
Speaker Out x 2
Other
RS232 x 1
Accessories
1 User Manual,
1 Remote Control,
2 AAA Batteries,
1 Power Cable,
1 PC D-Sub Signal Cable,
1 Component-Video Cable (YPbPr/YCbCr),
1 Audio/Video Cable
1 Audio Cable,
2 Speaker Cables
Display Format Supported by This Unit
For VGA: 640X480 @ 60Hz,72Hz,75Hz,85Hz;
800X600 @ 60Hz,72Hz,75Hz,85Hz;
1024X768 @ 60Hz;
1280X1024 @ 60Hz.
For DVI: 640X480 @ 60Hz,72Hz,75Hz,85Hz;
800X600 @ 60Hz,72Hz,75Hz,85Hz;
1024X768 @ 60Hz;
1280X1024 @ 60Hz.
For YPbPr: 480P @ 50Hz, 59Hz, 60Hz;
720P @ 50Hz, 59Hz, 60Hz;
1080i @ 50Hz, 59Hz, 60Hz.
For service, support and warranty information, visit www.pwwservice.com or call 1-866-396-6322.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the PLA-4205
to Petters Consumer Brands, LLC.
34
Programming the Polaroid Universal Remote Control
Following are two sets of instructions for programming your Polaroid Universal Remote
Control to work with other devices in addition to your Polaroid TV. (If you only wish to use
the remote control with your Polaroid TV, no additional programming is necessary.)
Begin with the Direct Programming Setup, and if unsuccessful, go on to the Auto Code
Search Setup.
Direct Programming Setup
This method requires use of one of the device codes found in the Device Code Table
(see last pages of your Operating Manual). Begin with the first code listed for your device.
1 Turn the device power off and point the Polaroid Universal Remote Control at the device
you wish to control.
2 Momentarily press a device button on the Polaroid Universal Remote Control (TV, DVD,
CBL, or AUX). When you release the device button the red LED at the top of the remote will
blink once.
Note: For devices other than a TV, DVD, or Cable Box, use the AUX key.
3 Press and hold the SET button (top-left button) until you see the LED blink once, followed
by two short blinks. Release the SET button after you see the two short LED blinks.
4 Enter the 5-digit code from the code table for the device you want to control. The LED
blinks once each time you press a numbered button. After you enter the last digit:
a) If the code you entered is the correct code for your device, you will see the LED blink
twice. Go to step 5.
b) If the code you entered is not the correct code for your device, you will see the LED
blink once. Repeat steps 2-4, this time choosing the next code in the list.
5 Press the Power button (top right-side button) on the remote and your device power
should turn on. If the power does not turn on, repeat the entire procedure beginning with
step 1.
If you are unable to program the remote properly after two or more attempts using the Direct
Programming Setup, go on to the Auto Code Search Setup.
35
Auto Code Search Setup
This method does not require use of the Device Code Table.
1 Turn the device power off and point the Polaroid Universal Remote Control at the device
you wish to control.
2 Momentarily press a device button on the Polaroid Remote Control (TV, DVD, CBL, or
AUX). When you release the device button the red LED at the top of the remote will blink
once.
Note: For devices other than a TV, DVD, or Cable Box, use the AUX key.
3 Press and hold the SET button (top-left button) until you see the LED blink once, followed
by two short blinks. Release the SET button after you see the two short LED blinks.
4 Press 9 - 9 - 1 on the number pad. Each time you press the number 9 button the LED
blinks once. When you press the number 1 button, the LED blinks twice.
5 Enter the following number, depending on the device you are trying to control. When you
release the button, you should see two short LED blinks.
Cable or Satellite box – Press 0
TV – Press 1
DVD player – Press 2
Audio device or VCR – Press 3
6 Momentarily press the power button (top-right button) and release it.
7 Press the CH+ button, slowly and repeatedly, until the device you want to control turns on.
Stop pressing immediately when the device power turns on.
Note: If you press the CH+ button too quickly you may save the wrong code, in which case
the remote control will not turn the device power on. Start at step 1 and repeat the
programming steps again.
8 When the device turns on, press and hold the SET button until you see the LED blink
twice. The code is now saved, and the remote should operate properly.
36
Remote Control ID Code List
###### Setup Code For TVs ######
Addison
Admiral
Advent
Aiko
Aiwa
Akai
Albatron
America Action
Anam
Anam National
Anhua
AOC
Apex Digital
Audiovox
10092
10093, 10463
10761, 10842
10092
11914
10812, 10702, 10030, 10672, 11903
10700, 10843
10180
10250, 10180, 10700
10250, 10650
10051
10451, 10093, 10180, 10060, 10030, 10178, 10092
10748, 10765, 10879, 10767, 11943
10451, 10180, 10875, 10092, 10623
Baile
Beijing
Bell & Howell
BenQ
Bradford
Broksonic
10661
10812, 10661
10154
11032
10180
10236, 10463, 11911, 11938, 11905, 11935, 11929
Cailing
Candle
Carnivale
Carver
Celebrity
Celera
Changcheng
Changhong
Ching Tai
Chun Yun
Chung Hsin
Cinema
Citizen
Clarion
Commercial Solutions
Conrowa
Contec
Craig
Crosley
Crown
Curtis Mathes
CXC
10748
10030
10030
10054
10000
10765
10051, 10661
10156, 10765, 11156, 10767
10092
10000, 10180, 10700, 10092, 10843
10180, 10053
10672
10060, 10030, 11928, 10092
10180
11447, 10047
10156, 10145, 11156
10180
10180
10054
10180
10047, 10054, 10154, 10451, 10093, 10060, 10702, 10030, 10145, 10166
10180
Daewoo
10154, 10451, 10180, 10030, 10178, 10672, 11928, 10092, 10661, 11909,
10623, 10700
10661
11080
10145
10017
10463, 10180, 10178, 10171, 11034
Dayu
Dell
Denon
Dumont
Durabrand
Electroband
Emerson
Envision
Ether
10000
10154, 10236, 10463, 10180, 10178, 10171, 11944, 11909, 11929, 11905, 11928,
10623, 11911
10030
10030
Firstar
Fisher
Fortress
Fujitsu
Funai
Furi
Futuretech
10236
10154
10093
10809, 10853
10180, 10171, 11904
10145
10180
Gateway
GE
Gibralter
GoldStar
Grunpy
11756, 11755
11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907,
11922
10017, 10030
10154, 10030, 10178, 11926
10180
Haier
Hallmark
Hankook
Harley Davidson
Harman/Kardon
Harvard
Havermy
Helios
Hello Kitty
Hisense
Hitachi
Hongmei
Huafa
Huari
Huodateji
11034
10178
10180, 10030, 10178
11904
10054
10180
10093
10865
10451
10156, 10748, 10145, 11156
10156, 10030, 10178, 11145, 10145, 10092, 11904, 11156
10093
10145
10145
10051
Imperial Crown
Infinity
Inteq
10661
10054
10017
JBL
JCB
Jean
Jensen
Jiahua
Jinfeng
Jinxing
JVC
10054
10000
10156, 10051, 10236, 10092
10761
10051
10051
10054, 10156, 10145
10053, 11923, 11253
Kangli
KEC
Kenwood
KLH
Kolin
KTV
Kunlun
10661
10180
10030
10765, 10767
10180, 10150, 10053
10180, 10030
10051, 10661
LG
Lloyd's
LXI
10060, 10030, 10178, 10856, 10700, 10025
11904
10047, 10054, 10154, 10156, 10178
Magnasonic
Magnavox
Magnin
Marantz
Matsushita
Maxent
Megapower
Megatron
Memorex
MGA
Midland
Mitsubishi
Monivision
Motorola
MTC
Mudan
Multitech
11928, 11913
11454, 10054, 10030, 10706, 11931, 11254, 11913, 11904, 11944
11907
10054, 10030, 10704
10250, 10650
11755
10700
10178, 10145
10154, 10463, 10150, 10178, 11911, 11926, 11924, 11920, 11927
10150, 10030, 10178, 11907
10047, 10017, 10051
10154, 10250, 10093, 10236, 10180, 11250, 10150, 10030, 10178, 11917, 10836
10843, 10700
10093
10060, 10030
10051
10180
NAD
National
NEC
Newave
Nikko
Norcent
NTC
10156, 10178, 10866
10051
10154, 10156, 10051, 10053, 10030, 10178, 11704
10093, 10178, 10092
10030, 10178, 10092
10748, 10824
10092
Onwa
Optimus
Optonica
Orion
10180
10154, 10250, 10166, 10650, 11927, 11924, 11913
10093
10236, 10463, 11929, 11911, 11905
Panasonic
Panda
Penney
Philco
Philips
Pilot
Pioneer
Portland
Prima
Princeton
Prism
Proscan
Proton
Pulsar
10054, 10250, 10051, 10650, 11941, 11927, 11924
10051, 10706
10047, 10156, 10051, 10060, 10030, 10178, 11926, 11907
10054, 10180, 10030, 10178
11454, 10054, 10000, 10051, 10030, 10178, 10092, 10690
10030
10166, 10866, 10679
10092
10761
10700
10051
11447, 10047, 11922
10030, 10178
10017
Qingdao
Quasar
10051
10250, 10051, 11924, 10650
RadioShack
RCA
10047, 10154, 10180, 10030, 10178, 11920, 11904
11447, 10047, 11454, 10000, 10030, 10178, 11547, 11922, 1917, 10092, 11907,
11948, 10090, 10679
10154, 10180, 10030, 10178
10748
10017, 10030
Realistic
Rowa
Runco
Sampo
Samsung
Sansui
Sanyo
Sanyuan
Scotch
Scott
Sears
Shaofeng
Sharp
Shen Ying
Shencai
Sheng Chia
Skygiant
Skyworth
Sony
Soundesign
Sowa
Squareview
SSS
Starlite
Studio Experience
Supreme
SVA
Sylvania
Symphonic
Synco
10154, 10093, 10030, 10178, 10171, 10700, 10650, 11755, 10092
10154, 10156, 10060, 10812, 10702, 10030, 10178, 11060, 10814, 10092,
11903, 10090, 10766
10463, 11904, 11935, 11929, 11911
10154, 10156, 10180, 10145, 11907
10093
10178
10236, 10180, 10178
10047, 10054, 10154, 10156, 10178, 10171, 11926, 11904
10145
10093, 10030, 10650, 11917
10092
10145
10093, 10236
10180
10748
11100, 10000, 10650, 11925, 11904
10180, 10178
10156, 10051, 10060, 10178, 10092
10171
10180
10180
10843
10000
10748, 10865
10054, 10030, 10171, 11944, 11931
10180, 10171, 11913, 11904
10000, 10451, 10093, 10060, 10178, 10092
Tacico
Tandy
Tashiko
Tatung
Technics
Techwood
Teco
Teknika
Telefunken
Tera
Thomas
Tiane
TMK
TNCi
Tobo
Toshiba
Tuntex
TVS
10178, 10092
10093
10092, 10650
10054, 10154, 10156, 10051, 10060, 11156, 11756, 11254
10250, 10051
10051
10051, 10093, 10178, 10092
10054, 10180, 10150, 10060, 10092
10702
10030
11904
10093
10178
10017
10748
10154, 10156, 10060, 10145, 11945, 11704, 11936, 11156, 11935, 10650, 11918
10030, 10092
10463
V Inc.
Vector Research
Victor
Vidikron
Vidtech
Viewsonic
11756, 10885, 10864
10030
10250, 10053, 10650
10054
10178
11755, 10885, 10864
Wards
Warumaia
Waycon
White Westinghouse
10054, 10030, 10178, 10866, 11156
10661
10156
10463, 11909, 10623
Yamaha
Yapshe
10030
10250
Zenith
10017, 10463, 10178, 11904, 11929, 11911, 11909, 10092
###### Setup Code For VCRs ######
ABS
Admiral
Aiko
Aiwa
Alienware
America Action
American High
Amoisonic
Anam
Anam National
Asha
Audiovox
21972
20048, 20209
20278
20037, 20479
21972
20278
20035
20479
20162, 20037, 20240, 20278
20162
20240
20037, 20278
Beaumark
Bell & Howell
Broksonic
20240
20104
20184, 20121, 20209, 20002, 20479
Calix
Canon
Carver
CCE
Changhong
Citizen
Colt
Craig
Curtis Mathes
Cybernex
CyberPower
20037
20035
20081
20072, 20278
20048, 20081
20037, 20278
20072
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
21972
Daewoo
Dell
Denon
DirecTV
20045, 20104, 20278
21972
20042
20039, 20038
Electrohome
Electrophonic
Emerex
Emerson
20037
20037
20032
20035, 20037, 20184, 20240, 20045, 20121, 20043, 20209, 20002, 20278, 20479
Fisher
Fuji
Fujitsu
20047, 20104
20035, 20033
20045
Gateway
GE
General
Go Video
GoldStar
21972
20060, 20035, 20240
20045
20432
20037, 20209, 20038, 20225
Haojie
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
Hitachi
Howard Computers
HP
Hughes Network Systems
20240
20081, 20038
20072
21972
20047
20037, 20042, 20055
21972
21972
20042, 20739
iBUYPOWER
21972
JVC
KEC
20045, 20067
20037, 20278
Kenwood
KLH
Kodak
Kolin
20067, 20038
20072
20035, 20037
20043
LG
Logik
LXI
20037, 20045, 20042, 20209, 20038
20072
20037
Magnavox
Magnin
Marantz
Marta
Matsushita
Media Center PC
MEI
Memorex
MGA
MGN Technology
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
20035, 20039, 20081
20240
20035, 20081
20037
20035, 20162
21972
20035
20035, 20162, 20037, 20048, 20039, 20047, 20240, 20104, 20209, 20479
20240, 20043
20240
21972
21972
20042
20067, 20043
20035, 20048
20240
20072
NEC
Newave
Nikko
Noblex
Northgate
20035, 20037, 20048, 20104, 20067, 20038
20037
20037
20240
21972
Olympus
Optimus
Orion
20035
21062, 20162, 20037, 20048, 20104, 20432
20184, 20209, 20002, 20479
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
21062, 20035, 20162, 20616, 20225
20035, 20037, 20240, 20042, 20038
20042
20035, 20479
20035, 20081, 20739, 20618
20037
20042, 20067
20081
20240
20060
20072
20039
Qisheng
Quasar
20060
20035, 20162
Radix
Randex
RCA
Realistic
ReplayTV
Runco
Sampo
Samsung
Sanky
Sansui
Sanyo
20037
20037
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
20039
20037, 20048
20240, 20045, 20432
20048, 20039
20067, 20209, 20479
20047, 20240, 20104
Scott
Sears
Sharp
Shintom
Shogun
Singer
Sonic Blue
Sony
STS
Sylvania
Systemax
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
20072
20240
20072
20616
20035, 20032, 20033, 20636, 21972
20042
20035, 20081, 20043
21972
Tagar Systems
Tashiko
Tatung
Technics
Teco
Teknika
Tivo
TMK
Toshiba
Totevision
Touch
21972
20037
20045, 20067
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
20636, 20618, 21503, 20739
20240
20045, 20042, 20067, 20043, 21503, 21008, 21972
20037, 20240
21972
Unitech
20240
Vector
Vector Research
Victor
Video Concepts
Videomagic
Videosonic
Viewsonic
20045
20038
20067
20045
20037
20240
21972
Wards
White Westinghouse
20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072
20209, 20072
XR-1000
20035, 20072
Yamaha
20038
Zenith
ZT Group
20039, 20033, 20209, 20479
21972
###### Setup Code For Digital Video Disks ######
Aiwa
Akai
Allegro
Apex Digital
20641, 21912
20770
20869
20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915
Blaupunkt
Blue Parade
Broksonic
20717
20571
20695
Changhong
CineVision
Coby
Curtis Mathes
CyberHome
20627, 21061
20869
21086
21087
21024, 21023, 21129, 20816, 21117
Daewoo
Denon
DVD2000
20833, 21172, 20869
20490
20521
Emerson
Enterprise
20591, 20675
20591
Fisher
Funai
21919
20675
Gateway
GE
Go Video
Greenhill
21158, 21073
20522, 20717
20744, 20833, 21099, 20783, 21075, 20869, 21730
20717
Harman/Kardon
Hitachi
Hiteker
20582, 20702
20573, 20664, 21919
20672
Initial
Integra
20717
20627, 21924
JBL
JVC
20702
20558, 20623, 20867
Kenwood
KLH
Koss
20490, 20534
20717, 21020, 21149
20651, 21980
Lasonic
LG
Liquid Video
Lite-On
Loewe
20798
20591, 20869, 20801
21980
21158, 21058
20511
Magnavox
Marantz
Memorex
Microsoft
Mintek
Mitsubishi
20503, 20539, 21976, 21914, 20675
20539
20695
20522
20717
21521, 20521
Nesa
Norcent
20717
21003
Onkyo
Oritron
20503, 20627, 21924, 20792
20651, 21980
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Portland
Proscan
20490, 21762, 21990
20503, 20539, 20646, 21914
20525, 20571
21086, 21061
20539
20770
20522
Qwestar
20651
RCA
Rio
Rotel
20522, 20571, 20717, 20822
20869
20623
Sampo
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Shinco
Shinsonic
Sonic Blue
Sony
SVA
Sylvania
Symphonic
20752, 20698
20490, 20573, 21932, 21075, 20820
20695
20695
20630, 20752
21117
20770
20717
20533
20869, 21099
20533, 20864, 21033, 21904, 21903
20717
20675
20675
Teac
Technics
Theta Digital
Toshiba
20717, 21984, 20809
20490
20571
20503, 20695
Urban Concepts
20503
Xbox
20522
Yamaha
20490, 20539, 20545
Zenith
20503, 20591, 20869
###### Setup Code For Cable Converters ######
ABC
Americast
00003, 00008, 00014
00899
Bell & Howell
Bell South
00014
00899
Clearmaster
ClearMax
Coolmax
00883
00883
00883
Daeryung
Digi
Director
Dumont
01877, 00877, 00477, 00008
00637
00476
00637
Gehua
General Instrument
GoldStar
00476
00476, 00810, 00276, 00003, 00014
00144
Hamlin
Hitachi
00009, 00273
00014
Jerrold
00476, 00810, 00276, 00003, 00012, 00014
KNC
00008
LG
00144
Memorex
Motorola
MultiVision
00000
00476, 00810, 00276, 01254, 01376
00012
Pace
Panasonic
Panther
Paragon
Philips
Pioneer
Pulsar
01877, 00237
00000, 00008, 00107
00637
00000
00317, 01305
01877, 00877, 00144, 00533
00000
Quasar
00000
RadioShack
Regal
Runco
00883
00279, 00273
00000
Samsung
Scientific Atlanta
Sony
Starcom
Supercable
Supermax
00000, 00144
01877, 00877, 00477, 00008
01006
00003, 00014
00276
00883
Tocom
Torx
Toshiba
Trans PX
Tristar
TS
00012
00003
00000
00276
00883
00003
V2
Viewmaster
Vision
Vortex View
00883
00883
00883
00883
Zenith
00000, 00525, 00899
###### Setup Code For Satellite Receivers ######
AlphaStar
00772
Chaparral
Crossdigital
00216
01109
DirecTV
Dish Network System
Dishpro
00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076,
01109, 00099, 01392, 01640, 01442, 01414, 01108
01005, 00775, 01505
01005, 00775, 01505
Echostar
Expressvu
01005, 00775, 01505
00775
GE
General Instrument
GOI
Goodmans
00566
00869
00775
01246
Hisense
Hitachi
HTS
Hughes Network Systems
01535
00819, 00222, 01250
00775
01142, 00749, 01749, 01442
I-Lo
JVC
LG
01535
00775
01414, 01226
Magnavox
Memorex
Mitsubishi
Motorola
00724, 00722
00724
00749
00869
NEC
Next Level
01270
00869
Panasonic
Paysat
Philips
Proscan
Proton
00247, 00701
00724
01142, 00749, 01749, 00724, 01076, 00722, 00099, 01442
00392, 00566
01535
RadioShack
RCA
00869
00392, 00566, 00855, 00143, 01392
Samsung
Sanyo
SKY
Sony
Star Choice
01276, 01109, 01108
01219
00856
00639, 01640
00869
Tivo
Toshiba
01142, 01442
00749, 01749, 00790, 01285
UltimateTV
Uniden
US Digital
USDTV
01640, 01392
00724, 00722
01535
01535
Voom
00869
Zenith
00856, 01856
###### Setup Code For Audio Amplifiers ######
Bose
GE
JVC
Marantz
Nakamichi
NEC
Optimus
Realistic
Sansui
Shure
Sony
Soundesign
Victor
Wards
Yamaha
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
###### Setup Code For CD Players ######
Aiwa
30157
Burmester
30420
California Audio Labs
Carver
30029
30157, 30179
Denon
DKK
DMX Electronics
Dynamic Bass
30873
30000
30157
30179
Fisher
30179
Garrard
Genexxa
30420
30032
Harman/Kardon
Hitachi
30157, 30173
30032
Integra
30101
JVC
30072
Kenwood
Krell
30826, 30626, 30028, 30037, 30036, 30190
30157
Linn
30157
Magnavox
Marantz
MCS
Miro
30157
30626, 30029, 30157
30029
30000
Mission
MTC
30157
30420
NSM
30157
Onkyo
Optimus
30868, 30101
31063, 30000, 30032, 30037, 30420, 30179, 31075, 30145
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
30029
30420
30626, 30157
31063, 31062, 30032
30157
30157
QED
Quad
Quasar
30157
30157
30029
RadioShack
RCA
Realistic
Rotel
31075
31062, 30032, 30420, 30179, 30053
30420, 30179
30157, 30420
SAE
Sansui
Sanyo
SAST
Sharp
Silsonic
Sonic Frontiers
Sony
Soundesign
30157
30157
30179
30157
30861, 30037
30888, 30036
30157
30490, 30000, 30100
30145
TAG McLaren
Tascam
Teac
Technics
30157
30420
30420
30029
Victor
30072
Wards
30157, 30053
Yamaha
30888, 30036
Zonda
30157
###### Setup Code For Audio Amp/Tuners ######
ADC
Aiwa
Anam
Audiotronic
30531
31405, 31243, 30121
31609, 31074
31189
Bose
31229
Capetronic
Carver
Coby
30531
31189
31263
Denon
31360, 31142, 30904
Fonmix
31360
Glory Horse
31263
Harman/Kardon
Hitachi
30110
31273
Inkel
Integra
30027
30135
JBL
JVC
30110
30074, 31263
Kenwood
KLH
31313, 31570, 30027
31428
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
Onkyo
Optimus
30842, 30135
31023, 30670, 30531, 31074
Panasonic
Philips
Pioneer
Proscan
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
Qisheng
Quasar
31609
30039
RadioShack
RCA
31263
31023, 31609, 31254, 30531, 31074
Sharper Image
Silsonic
Sony
Soundesign
Stereophonics
Sunfire
31263
30176
31058, 31441, 31258, 31759
30670
31023
31313
Teac
Technics
Thorens
31074, 31267
31308, 31518, 30039
31189
Victor
30074
Wards
30014
Yamaha
30176, 31276, 31176
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement