Haverland ECORAD1250i Instruction & Installation Manual

Add to My manuals
24 Pages

advertisement

Haverland ECORAD1250i Instruction Manual | Manualzz
ECORADi
Instructions & installation manual
HAVERLAND
APP
Voice Control
works with the
IF YOU HAVE ANY DIFFICULTY WITH
THIS PRODUCT, INSTEAD OF TAKING
IT BACK TO THE RETAILER, TRY:
1. The instruction booklet
2. Refer to [email protected]
NOT SUPPLIED
SMARTBOX
ECORADi_V1_28052019_MISA_ESUKFP2019
3. Or call our helpline:
UK:
0330 365 1940
Google is a trademark of Google LLC.
INDEX
PAGE
4
6
9
9
9
11
11
12
13
13
13
14
15
16
16
17
18
18
18
19
19
19
20
20
21
21
1. CAUTION
2. INSTRUCTIONS FOR INSTALLATION
3. OPERATION
3.1 CONTROL PANEL
3.2 YOUR RADIATOR IS CONFIGURED!
3.3 FACTORY-SET PARAMETERS
3.4 OPERATING MODES
3.4.1 LEARNING MODE (factory activated)
3.4.2 SENSOR MODE
3.4.3 MANUAL MODE
3.5 ADJUSTING THE TEMPERATURE
3.6 COMFORT, ANTI-FROST AND ECONOMY TEMPERATURES
3.7 “OPEN WINDOW” FUNCTION
3.8 “KEYPAD LOCK” FUNCTION
3.9 STANDBY
3.10 ADJUSTING DAY AND TIME
3.11 OTHER INDICATIONS
3.11.1 HEATING ELEMENT ON INDICATOR
3.11.2 SENSOR INDICATOR ON
3.12 BATERRY
4. SMARTBOX (OPTIONAL)
4.1 SMARTBOX (OPTIONAL)
4.2 CONTROL “VIA APP”
4.2.1 HOW DO I CONFIGURE THE SMARTBOX WITH MY RADIATORS?
5. MAINTENANCE
6. GUARANTEE
P
1. CAUTION
• Please read these instructions carefully.
• To disconnect mains power from the radiator remove the
plug from the wall socket, but never pull on the cable.
• Do not leave the mains cable in contact with the radiator
when it is switched on.
• During operation, the radiator must be kept well away from
combustible materials, such as curtains, carpets and furniture
etc.
• The warranty for the radiator does not cover any damage
caused by not reading these instructions.
WARNING: In order to avoid overheating, do not
cover the heater.
• WARNING: If the mains power cable is damaged, it must
be replaced by the manufacturer, with their after-sales
service or similar qualified persons, in order to prevent
any danger.
• WARNING: If the heater is to be installed in a bathroom,
it must be positioned so that it cannot be touched by
anybody in the bath or shower.
• The installation should be carried out with consideration
to the manufacturer’s instructions and in accordance to
the relevant National Wiring Regulations BS7671.
• It is very important that radiator has a good Electric Earth
connection.
• The radiator shall be installed so that its mains plug is always
accessible.
• The radiator must not be installed below or in front of a mains
socket.
• This radiator cannot be surface-mounted with a wall.
Safety distances shall always be respected.
4
ECORADi
1. CAUTION
• The radiator has a keyboard blockage option to prevent
children from changing the programming.
• This unit is not designed to be handled by persons (including
children) with physical, sensorial or mental handicaps, with
little experience or knowledge unless they are under the
supervision of an adult responsible for their safety with the
instructions on its use. Children shall always be supervised to
ensure they do not play with the unit.
• Children under three shall be kept well away from the heater
unless they are continually supervised.
• Children between three and eight shall only switch the unit off
or on providing it is positioned or installed in its final operating
location and be supervised or have received instructions on
how to use the unit in a safe manner and understand the risks
involved.
• Children between three and eight shall not plug in, adjust or
clean the heater or carry out any maintenance operations.
• This unit may be used by children older than eight and by
persons with physical, sensorial or mental handicaps, with
little experience or knowledge, provided they have been duly
trained and are supervised by an adult that understands the
risks involved.
• Cleaning and maintenance shall be performed by adults not
children. Children must not play with the unit.
• WARNING: Certain parts of this product can become
very hot and cause burns. Special attention shall be paid
when children and other vulnerable persons are present.
• Do not touch the external parts of the radiator when it is
operating.
• It is quite normal that, with the first switch-on, the unit
produces a “new” smell. Allow your heater to operate in a
well-ventilated place for two or three hours.
ECORADi
5
2. INSTRUCTIONS FOR INSTALLATION
• Before the first switch on for the coming winter or when the
heater has not been used for several days, the unit should be
cleaned (follow the steps given in the “maintenance section”.This
cleaning operation will avoid burning the accumulated dust and
other remains.
• This radiator CAN’T OPERATE with external programmable
controllers or any other exterior control device.
• CAUTION: Keep bags and other accessories well out of the
reach of children.
• The convection effect, together with other ambient factors, can
cause discolouring to metal surfaces and to plastics.
• Temperature differences can cause crackling and other noises in
the unit. This does not indicate any failure in the radiator.
• When the radiator is disposed of, the requirements established
by current legislation on waste processing and recycling shall be
taken into account.
IMPORTANT
• It is important that the radiator IS FIXED FIRMLY TO A SOLID AND LEVELLED WALL.
• Make sure that there is a socket near the area where you are going to place it.
• Take out the wall pattern from the box to see the exact positions of the necessary drill
holes.
• You must keep a minimum distance of 15 cm between the radiator and any object, wall
or combustible material.
6
ECORADi
2. INSTRUCTIONS FOR INSTALLATION
IMPORTANT
• Take into account the radiator location
so that it can detect presence over the
largest possible area of the room.
• The presence sensor will not detect any
movement if the distance to the heater
exceeds five metres.
• Remember that the sensor will detect
the movement of pets.
• DO NOT PLACE ANY OBJECTS IN
FRONT OF OR ANYWHERE NEAR
THE SENSOR.
2
1
Cardboard
template
Place the screw
but don’t
screw it fully.
(M. 6 x 40 mm)
4
3
Place
the radiator
4 Screws
5.5 x 50 mm
ECORADi
7
2. INSTRUCTIONS FOR INSTALLATION
3
1
5
Slide the
radiator up,
2
Place over top
tang and lower
gently into
position
Plug in
3 pin 13 amp
plug
7
6
IMPORTANT:
Screw down
FULLY to lock
the radiator
8
Press ON /
OFF switch
located at the
right rear part
of the unit.
INFORMATION
(W) “A” (mm) “B” (mm) “C” (mm)
500
420
246
159
750
420
246
319
1000
420
246
478
1250
420
246
638
1500
420
246
638
8
ECORADi
3. OPERATION
3.1 CONTROL PANEL
11
4
5
6
3
1
2
9
8
7
10
1. Panel control
2. Temperature indicator
•
Red = Comfort
•
Blue = Anti-frost
•
Green = Economy
3. Operating mode indicator:
•
Flashing = “Learning” mode
•
Fixed = Sensor mode
•
Off = Manual mode or “Forced” programming
mode (via Smartbox App (available separately).
4. “Forced” programming mode (via Smartbox App
(available separately).
5. Sensor indicator
6. Heating On
7. Increase
8. Decrease
9. Screen:
•
Ambient temperature
•
Selected temperature
•
Clock and day
10. Standby
11. “Open windows” indicator
3.2 YOUR RADIATOR IS CONFIGURED!
1
2
ECORADi
9
3. OPERATION
4
3
Detection
5
No Detection
7
No Detection
8
6
Your radiator is now ready to learn
your life style habits and to provide
heat WITHOUT ANY NEED TO
PROGRAMME ANYTHING.
According to your presence, it will
learn a template for each day of
the week, week by week.
The radiator NEVER stops
learning. If you change your
habits of getting up and going
to bed etc, the unit will reprogramme itself to adapt to your
new habits.
10
ECORADi
3. OPERATION
3.3 FACTORY-SET PARAMETERS
1)
Clock and current day are factory set.
2)
Comfort temperature = 20 ºC.
3)
Economy temperature = 16 ºC
4)
Activated operating mode = “Learning” mode.
3.4 OPERATING MODES
Your radiator incorporates four operating modes. The “learning” mode is activated at the factory.
To change the operating mode:
Simultaneously press
and
every time you want to change the operating mode.
Light indicator 3
will change:
1) “Learning” mode: “slowly flashing” light.
2) Manual mode: light is OFF.
3) Sensor mode: fixed light.
4) “Forced” programming mode (via Smartbox App (available
separately)
ECORADi
11
3. OPERATION
3.4.1 LEARNING MODE (factory activated):
During seven days and CONTINUALLY, week by week, your radiator will be learning your lifestyle.
The radiator has 2 working profiles:
* Economic Profile “PE” (Default factory settings)
This profile prioritizes the energy savings.
1
If there is detection:
2
If there is no detection:
> 30 minutes = Economy mode.
3
If there is no detection:
> 12 hours = Anti-frost mode.
Comfort mode.
* Comfort profile “PC”:
This profile prioritizes comfort and welfare.
1
If there is detection:
2
If there is no detection:
3
If there is no detection:
Comfort mode.
> 30 minutes = Economy mode.
> 16 hours = Anti-frost mode.
Day by day, the radiator is “learning” the presence (comfort) periods and the absence periods
(economy).
After 7 days, the radiator will start working according to the programmed presence periods
(comfort) and the absent periods (economy), depending on the chosen working profile.
The comfort periods in the following week will start before the programmed time so that the unit
wams up before you enter the room.
The auto-programming period is continuous. The radiator updates according to
your lifestyle variations, day by day, week by week.
12
ECORADi
3. OPERATION
3.4.2 SENSOR MODE
1
If there is detection:
2
If there is no detection:
Comfort mode.
> 30 minutes = Economy mode.
The radiator does NOT store any information on the memory.
3.4.3 MANUAL MODE
In this mode, you decide when you want Comfort temperature, Economy temperature or Antifrost temperature.
When Manual mode is selected, you only have to choose Comfort, Anti-frost or Economy and
the desired ambient temperature.
3.5 ADJUSTING THE TEMPERATURE
In order to change the Comfort and Economy temperatures the radiator must be in
MANUAL mode (see point 3.4).
The factory-set temperatures are:
1) COMFORT TEMPERATURE = 20 ºC
2) ECONOMY TEMPERATURE = 16 ºC
3) ANTI-FROST TEMPERATURE = 7 º C
The anti-frost temperature (7 ºC) cannot be changed.
ECORADi
13
3. OPERATION
3.6 COMFORT, ANTI- FROST AND ECONOMY TEMPERATURES
The radiator has three pre-adjusted temperatures.
The operating temperature is shown in colours light indicator 2:
Light indicator 2
2
•
Red light = Comfort
•
•
Blue light = Anti-frost
Green light = Economy
ogramming
eparately).
tbox App
The default comfort temperature adjustment (when the room is occupied) is 20 ºC.
The default economy temperature adjustment (when the room is not occupied or there’s no
detection on the room) is 16 ºC.
The default anti-frost temperature adjustment (when the occupant is absent from the room for
more than twelve hours) is 7 ºC.
Comfort and economy temperatures can be modified (the anti-frost temperature is fixed):
1. To change the comfort and economy temperatures, the heater must be in MANUAL
MODE (see point 3.4).
2. Select the temperature to be changed, comfort, anti-freezing or economy, pressing the
button .
3. Press the
•
Red light = Comfort
•
•
Blue light = Anti-frost
Green light = Economy
button. The selected temperature will be displayed and it will start to flash.
4. To select the desired temperature please press the
14
ECORADi
or
buttons.
3. OPERATION
• The comfort temperature range is from 18 to 28 ºC.
• The maximum economy temperature is 18 ºC.
• The economy temperature can NEVER be higher than the comfort
temperature.
• The economy temperature is always 4 ºC less than the assigned comfort
temperature.
3.7 “OPEN WINDOW” FUNCTION
This function is activated when there is a sudden drop of temperature in the room.
When this function is activated (indicator 11, point 3.1), the radiator will switch off, avoiding
unnecessary power consumption.
By closing the window, the radiator will detect a rise in temperature and this function will be
deactivated.
The radiator will switch on again to the mode it was on before the switch-off.
This function is pre-set from the factory. It can be activated or deactivated
by the user.
1. Set the radiator on “Standby” mode by pressing the “Standby” button.
2. Press the
and
the function is activated.
buttons simultaneously, two lines will be displayed indicating that
3. To deactivate the function please press again the
and
buttons.
A single line will be displayed. Wait a few seconds for the radiator to return to the “Standby”
mode. If you wish to switch on the radiator, press the “standby”
button.
ECORADi
15
3. OPERATION
3.8 “KEYPAD LOCK” FUNCTION
The keypad may be blocked and unblocked
by simultaneously pressing the
and
buttons.
The display and the control panel lights
will turn off.
A dot will be displayed on the right
bottom part of the display.
If two dots are displayed it means the keyboard is locked and the unit is on standby
mode. Please unlock the keyboard first.
3.9 STANDBY
To switch the radiator on and off press
.
ON = 1 beep.
OFF = 2 beeps.
A dot will be displayed on the left part of
the display.
16
ECORADi
3. OPERATION
3.10 ADJUSTING DAY AND TIME
Your radiator is supplied with the clock and day of the week already factory set.
You will need to adjust the clock to change to the Summer/Winter schedule (this is an automatic
setting if you have the Smartbox (not included)).
1
Press the
and
buttons. A “d” will appear on the screen.
d
Wait.
Then a number from 1 to 7 will appear flashing to indicate the day of the week.
2
Wait. Adjust the day of the week by pressing
2
or
. Wait.
“h” is displayed.
h
Wait.
Then, the value indicating the hours will flash.
15
Adjust the hours using
3
Wait.
and
. Wait.
Then, “n” appears on the screen.
n
ECORADi
17
3. OPERATION
Then, the value indicating the minutes will flash:
57
Adjust the minutes using
or
.
Wait.
4
Straight away, the working profile will appear and show the learning mode “PE”,
“Economy Profile”.
On the “Economy” PE, the energy savings is prioritized, while on the Comfort Profile “PC” it
prioritizes your comfort.
pE
To set up the profile using
or
.
Wait.
Then, to finalise, the approximate room temperature appears.
3.11 OTHER INDICATIONS
3.11.1 Heating element ON indicator:
When the radiator is operating, mode light 6 will be
on.
18
ECORADi
3.12.2 Sensor indicator On:
When the sensor is detecting, mode light 5 will
be on.
4. SMARTBOX
3.12 BATTERY
Your radiator is fitted with long-duration lithium battery.
When the battery is replaced, the day of the week and the time have to be re-adjusted (see point
3.10) (this is an automatic setting if you have the Smartbox (not included)).
4.1 SMARTBOX (OPTIONAL)
Thanks to the “smartbox” and our Haverland APP,
you will have control of all functions of your radiators
through your smartphone, tablet or PC/Mac.
Check with your distributor.
“Smartbox optional”
Voice Control
works with the
APP
Google is a trademark of Google LLC.
ECORADi
19
4. SMARTBOX
4.2 CONTROL “VIA APP”
To control all functions of your radiators, through your smartphone or tablet and via our free
Haverland app, you will need a Haverland Smartbox (not supplied with the device).
Our Haverland Smartbox connects your radiators to the Internet using the
property’s router.
The Smartbox communicates with the radiators via radio frequency, and with the router through
an Ethernet cable (supplied with the Smartbox).
If you would like to purchase our Haverland Smartbox, please contact your distributor.
4.2.1 HOW DO I CONFIGURE THE SMARTBOX WITH MY
RADIATORS?
Once you have installed our Smartbox (follow the steps described in its manual), you can
download our Haverland app
wizard on the app.
for free on the Apple Store or on Google Play. Follow the
Once you have registered into our system (user account and your Smartbox is registered), press
“+ HEATER”. The Smartbox is now in “discovery mode.
Then to add the device to the app make sure the radiator is on “Standby” mode.
Press the “START SEARCH” button in the app and hold both
and
3 seconds on your radiator. The device is now installed on your app.
You can manage all its functions from your smartphone or tablet.
20
ECORADi
buttons for at least
5. MAINTENANCE
If you are an installer, you do
not need to download our
app to install your customer’s
equipment. To activate our
Smartbox in “discovery” mode,
press the button on the back of
the Smartbox for 3 seconds (see
image).
3 seconds
5. MAINTENANCE
Your radiator does not need any kind of special maintenance.
Just remove any dust with a soft dry cloth.
We recommend to start the winter season, by cleaning off the dust that has built up on the heater
surface.
NEVER USE SOLVENTS OR ABRASIVE PRODUCTS.
ECORADi
21
6. GUARANTEE
MARSAN INDUSTRIAL, S.A. guarantees that the devices comply with the contracted specifications.
This warranty only covers the model of heater showed on the valid invoice.
Such rectifications will be guaranteed against any manufacturing and operating defect for the normal
and domestic use of this product, for a period of 24 months as from the purchase date shown on the
invoice.
HAVERLAND guarantees against material, design or manufacturing faults at the moment of its original
acquisition for 2 years. The electronic component and paintwork / finish for 3 years and 10 years for
radiator block seal (exclude accidental damage, transport, and misuse).
This warranty only covers the device whose model appears on the purchase invoice.
This warranty DOES NOT COVER incorrect installation, maintenance, cleaning or conserving
the device, and neither does it cover failures and faults due to force majeure, chemical agents or
atmospheric phenomena, incorrect use of the device, the purchaser’s faulty electrical installations,
transporting the device or problems caused by the device being handled by persons not authorised
by MARSAN INDUSTRIAL, S.A.
This warranty must not be modified, altered or extended, and the Manufacturer does not authorise
anybody to act on his behalf to modify, alter or extend it.
This warranty applies only to the Product.
To repair the device, the consumer must dial the Technical Assistance Service at 0330 3651940 or
send an email to [email protected] and ask for the information needed about the procedure
to follow:
For a replacement, cancellation or price reduction, when in order, the consumer must go the
establishment where the device was purchased. This warranty does not affect the consumers’ rights
as established in the provisions contained In Law 23/2003, the Consumer Goods Sales Guarantee
Act.
Customer Service Telephone:
0330 3651940
E-mail: [email protected]
Made in Spain
Haverland UK Limited
Challengue House
Sherwood Drive
Bletchley MK3 6DP
Marsan Industrial, S.A. reserves the right to modify without previous warning
22
ECORADi
Models
ECORAD500i
ECORAD750i
ECORAD1000i
ECORAD1250i
ECORAD1500i
ECORAD1800i
Nominal heat
output (kW)
0.5
0.75
1.0
1.25
1.5
1.8
Maximum continuous heat
output (kW)
0.5
0.75
1.0
1.25
1.5
1.8
Heat output
Auxiliary electricity consumption
At nominal heat
output (kW)
0.5
0.75
1.0
1.25
1.5
1.8
At minimum heat
output (kW)
0.5
0.75
1.0
1.25
1.5
1.8
In standby mode
(kW)
< 0.001
< 0.001
< 0.001
< 0.001
< 0.001
< 0.001
Type of
heat room
temperature
control
Electronic room temperature control plus week timer
Other control
options
- Room temperature control, with presence detection
- Room temperature control, with open window detection
- With distance control option
- With adaptive start control
- With working time limitation
Name of manufacturer
Marsan Industrial, S.A.
Address
Avda. San Martín de Valdeiglesias, Km 2.2 28925 Alcorcón (Madrid) Spain
ECORADi
W
ECORAD500i
500
4
ECORAD750i
750
6
ECORAD1000i
1000
8
ECORAD1250i
1250
10
ECORAD1500i
1500
12
ECORAD1800i
1800
12
Nº
230 V 50 Hz
CLASS I
IP X0

advertisement

Key Features

  • Presence sensor
  • Open Window function
  • Learning mode
  • Manual temperature control
  • Comfort, Economy, Anti-frost modes
  • 1.25 kW heating output

Related manuals

Frequently Answers and Questions

How does the 'Learning' mode work?
The 'Learning' mode automatically adjusts the radiator's heating schedule based on your daily routines. It learns when you are home and away, and adjusts the temperature accordingly to save energy and provide comfortable heat.
How do I manually change the temperature?
To change the temperature, switch the radiator to Manual mode and use the '+' and '-' buttons to adjust the desired temperature. You can choose between Comfort, Economy and Anti-frost modes.
What is the 'Open Window' function?
The 'Open Window' function automatically switches off the radiator when it detects a sudden drop in temperature, indicating an open window. This helps prevent energy waste by avoiding unnecessary heating.
Download PDF

advertisement