City Elite Single

City Elite Single
City Elite Single
Amazing 360° Turns
Make For Extreme Maneuverability
This product complies with BS EN 1888:2003 inc. A1,2,3: 2005
This product complies with ASTM F833-07a
Read these
instructions carefully
before use and
keep them for
future reference.
Your child’s safety may be
affected if you do not follow
these instructions.
For the sake of your precious cargo, please read
these warnings before using your stroller.
arning: Ensure all
locking devices are
engaged before use.
arning: DO NOT exceed 3mph – this stroller is not suitable for running, jogging,
skating or roller blading.
• Warning: Prevent serious injury to your child by always using the safety harness.
arning: Parcels or accessory items, or both, placed on the unit may cause the unit
to become unstable.
• Warning: Never leave your child unattended.
arning: Recommended weight for seat pocket is 2 lbs and basket is
4.4 lbs. Excessive weight may cause a hazardous unstable condition to exist.
arning: Stroller is not meant to be used for transporting children up or down
stairs. Damage resulting to stroller will not be covered under warranty.
npack stroller from box and set rear wheels
aside. Ensure that storage latch is not fastened
on frame before unfolding stroller.
2 P ull front wheel forks up from
underneath the handlebar.
Then, pull bottom of frame
up and away from handlebar.
arning: Child may slip into leg openings and strangle. Never use in reclined
carriage position unless safety harness is properly fastened.
ccessories which are not approved by the manufacturer or distributor
shall not be used.
• The passenger shall remain seated (no standing in the stroller).
• Watch out for cars – never assume that a driver can see you and your child.
• T otal weight load recommended for this stroller is 75 lbs / 34 kg
(combined passenger and baggage weight).
• This stroller seats one passenger.
• It may be unsafe to use replacement parts other than those supplied or approved
by the manufacturer.
3 Lay stroller flat so that both ends are
resting on the floor. The stroller frame
will click and lock into place.
4 Turn stroller over.
To fold: Unsnap safety strap from frame and pull up on fold strap.
Front Wheel
1 To install front wheel, lay stroller back so the
handle is resting on floor.
Rear Wheels
2 Align the round opening on the top of the front
fork with the round metal peg underneath the
foot plate. Slide the front wheel onto the metal
peg until it clicks into place.
1 To install, gently slide the rear wheel’s axle into the hole in the frame until the wheel clicks into place.
2 To remove, simply press the
wheel button while gently
sliding the wheel away from
the frame.
Front Wheel Locking Lever
Turn to the left to lock front wheel.
Turn to the right for swivel action.
To remove the front wheel, press down on the lever on the
top of the front fork and slide the wheel off.
Safety Harness
3 To buckle the harness: Simply
push side buckle into center
buckle until it locks into place.
To unbuckle: Push one side of
the center button and pull the
corresponding side buckle away
from the center buckle. Repeat
to unbuckle other side.
nclip top of shoulder
strap from the seat and
re-clip on the pair of
seat loops closest to
your child’s shoulder
arning: Engage
parking device
before loading
and unloading
2 To adjust the shoulder
and crotch strap length:
Remove the shoulder
pads and slide the
plastic guide up or
down to lengthen
or shorten.
arning: Always use the crotch strap in combination with the
shoulder straps and waist belt.
• T o engage parking brake: Gently
pull brake lever into upright
position until it clicks into place.
• T o release parking brake:
Pinch gray tabs and pull
towards you. Push brake
lever down until it is
parallel with the frame.
arning: Always be
sure the safety strap
Is securely snapped
onto the frame
before using stroller!
1 To attach canopy to frame, simply slide canopy
axle into top hole of the bracket on the
frame, until you hear it click into place. The
bottom hole can be used for accessories (sold
separately), and they should be inserted into
bracket the same way as the canopy.
To remove canopy: stand facing the stroller
and press the bracket buttons with index
finger while removing canopy from the
1 S ecure seat fabric to
frame by lining up
snap placement on
frame and fabric.
2 S ecure seat straps around the bottom
of the frame, behind the front wheel.
Thread one seat strap through the D
ring of the other strap, and fasten both
Velcro sides firmly together.
3 S ecure safety straps to both
sides of the frame before use.
To fold stroller:
Remove child from
seat. Unsnap safety
straps from frame
and pull upwards on
the fold strap with a
gentle tug.
2 S nap webbing together
around top of frame.
3 S ecure canopy around frame
with Velcro tab.
nce canopy is in place,
attach the console by
aligning the Velcro strips
on the console and
4 B e sure that fold strap rings are secured to the
frame before use.
Reclining Seat
Raised Kicker
1 To use the raised kicker, pull
up on seat flap above the
footplate, and remove the
kicker stand from storage
pocket. Attach the kicker
stand to the seat with the
hooks provided under seat flap.
ttach kicker stand by
wrapping both sides of the
webbing under the footplate.
Thread one side of the velcro
webbing through the D ring
of the other side, and secure
velcro together.
hen not using the raised
kicker, tuck the kick stand
and the webbing straps into
the pocket provided under
the seat.
1 T o recline: Pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down on
both sides to match recline position of clamp.
eather Cover: If desired, pull weather cover down
and over the seat back mesh. Secure firmly over
both sides of seat. When not in use, roll weather
cover up and fasten with elastic loop and barrel
provided under top of the seat fabric.
2 F rom the rear of the
1 F rom the front of the stroller: Remove lower
seat fabric to expose bottom front portion
of frame. Fasten basket Velcro around frame
tubing on right side. Repeat on left side.
Re-apply seat fabric to frame once complete.
stroller: Fasten the top
snaps of the basket
around frame tubing
above the middle
support bar.
3 F asten the bottom
snaps of the basket
around frame tubing
below the middle
support bar.
Reverse steps to return to the upright position.
Quick Fold
Simple Lift & Fold
arning: Always be
sure the safety strap
Is securely snapped
onto the frame
before using stroller!
In Motion
• S teering your stroller is simple: It is balanced to turn with just a light touch on the handlebar without
having to lift the front wheel.
In the Dark
• S ince we are concerned about the safety of you and your child, we recommend that you not use
your stroller at night. However, if you choose to, please attach reflective strips to the wheels and the
seat. Bicycle lights can also be mounted on the handle crossbar. These accessories can be found at
most bike stores.
To fold stroller:
1 R emove child from seat. Remove safety
straps from frame. Pull upwards on the
fold strap with a gentle tug.
• T o preserve the longevity of your stroller, it is important to perform simple, regular maintenance.
The tires on your stroller are foam filled. Though the P.S.I is printed on the tire, you will never need
to inflate them. From time to time, make sure that the joints and folding areas are still in good
condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop
for added lubrication. All repairs should only be carried out by an authorized dealer.
NOTE: When contacting
Baby Jogger regarding your
stroller, please have your
stroller’s serial number and
manufacturing date ready.
They can be found on the
lower back portion of the
frame, above the right wheel.
The sample product shown in this manual may differ slightly from your production quality Elite stroller.
However, this will not affect the assembly or functionality of your Baby Jogger stroller.
Stroller Care
WarrAnty Registration On-Line AT
ou can machine wash your stroller’s seat in cold water with a mild detergent.
To minimize shrinkage, simply reattach the seat to the frame to dry.
(Please do not put the seat in the dryer!)
e sure to remove the frame from the back of the seat
before washing.
Baby Jogger's Limited Lifetime Warranty:
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include
but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components
shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a
warranty claim and the warranty is only extended to the original purchaser.
This warranty does not cover:
Wheel Care
• T he wheels can be cleaned using a damp cloth.
They will need to be dried completely with a soft towel or cloth.
• Normal wear and tear
• Corrosion or rust
• Incorrect assembly, or the installation of third party parts or accessories not compatible with the original design
• Accidental or intentional damage, abuse or neglect
• Commercial Use
• Improper storage/care of the unit
• S unshine can fade seat fabric and dry out tires, so storing your stroller indoors will
prolong its good looks. However, if you do store it outside, using a tarp will help
protect against weather wear.
This warranty specifically excludes claims for indirect, incidental, or consequential damages. The implied warranties of merchantability and
fitness for a particular purpose is according to the specific warranty period for this model unit at time of purchase. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are in your state,
consult your local or state consumer affairs office or your state’s Attorney General.
E-Mail: [email protected]
Call:1-800-241-1848 between 8am – 6pm EST, Mon. – Fri.
Baby Jogg er Company
8575 Magellan Parkway
Suite 1000
Richmond, VA 23227
Thank You!
We wish you many happy journeys with your new
stroller! Your stroller is a great product, and we
are proud to manufacture it. If you have any
questions or comments, please give us a call at:
Baby Jogger is a Division of Dynamic Brands
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227
T: 800.241.1848 • F: 804.262.6277 •
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF