Alpine | CDE-103BT | User`s guide | Alpine CDE-103BT User`s guide

Alpine CDE-103BT User`s guide
Bluetooth® Software Update
User s Guide
XA-W407BT
Type B: CDE-125BT/-126BT, CDE-113BT/-114BT, CDE-103BT/-104BTi, INA-W910R, KCE-250BT
Type D: KCE-400BT, iXA-W407BT
Introduction
This guidebook describes procedures for updating Bluetooth software. This is necessary in order to update
the compatibility with new phones. Be sure to read the warning and procedures carefully before updating.
Requirements
•  The update software varies by model. Confirm the software before updating.
•  Updating requires a computer with built-in Bluetooth or a Bluetooth dongle.
•  Do not update Bluetooth software while driving.
•  Do not turn off the vehicle s ACC or Head Unit power while updating. The update will not be performed
correctly and the product may become unusable.
•  Updating results in all user information being deleted: user settings, paired phones, and phonebook
contacts.
Confirmed Computer Configurations
Operating System
•  Microsoft Windows XP Professional Service Pack 2
•  Microsoft Windows Vista Home Premium
•  Microsoft Windows Vista Business
Tested Computer Configurations
Intel Celeron M CPU
410 @ 1.46GHz
1.46GHz, 504MB RAM
OS: Windows XP SP2
Stack: WIDCOMM 5.1.0.4200
Intel Celeron CPU
1066MHz
1.06GHz, 240MB RAM
OS: Windows XP SP2
Stack: WIDCOMM 5.1.0.3300
Intel Core 2 Duo CPU
T7100 @ 1.80GHz
1.79GHz, 984MB RAM
OS: Windows XP SP2
Stack: WIDCOMM 5.1.0.1700
Intel Celeron M CPU
410 @ 1.46GHz
1.46GHz, 504MB RAM
OS: Windows XP SP2
Stack: Microsoft 5.1.2600.2180
Intel Core 2 Duo CPU
T7100 @ 1.80GHz
1.80GHz, 2039MB RAM
OS: Windows Vista Business
Stack: Microsoft 6.0.6000.16398
Intel Core 2 Duo CPU
T7100 @ 1.80GHz
1.80GHz, 2039MB RAM
OS: Windows Vista Business
Stack: Microsoft 6.0.6000.16682
1
Bluetooth Software Update Tool Installation
2
1
Open the setup.exe file and follow
the instructions on the screen. Then
press the Next > button.
Press the Next > button when the
following window appears.
4
3
Select the folder where you want to
install the Bluetooth Software Update
Tool , and press the Next > button.
Select the Start Menu folder in which
you want to create a shortcut for the
update tool and press the Install
button, or simply press the Install
button if the preset directory is ok.
After the installation is finished, the
next window will appear. Press the
Finish button. Your update tool is
now installed and ready to be used.
2
Bluetooth Software Update
1
Prepare for Bluetooth software update.
• Park the vehicle in a safe place.
• Turn off the engine.
2
Set the key position to ACC and turn on the Head Unit.
3
Set Bluetooth communication with the PC.
But do not start Bluetooth Software Update Tool here.
For Type B:
CDE-125BT/-126BT, CDE-113BT/-114BT,
CDE-103BT/-104BTi, INA-W910R, KCE-250BT
For Type D:
KCE-400BT, iXA-W407BT
Move to the next step.
1.  Set pairing between Alpine device and computer. For
details of pairing method, refer to the Bluetooth device
manual.
2.  Input PIN code 0000 to the Bluetooth device. If
pairing is done successfully, the paired device name
and CONNECTED will be displayed on the Head Unit.
3.  Cease all Bluetooth communication with the Head Unit,
except for pairing.
4
Before starting the software update, confirm the
current software version. The procedure is
described in the manual of the Alpine Bluetooth
device.
3
5
Activate FW UPDATE in the Head Unit Bluetooth
setup menu in order to start the software update. The
procedure is described in the Head Unit manual.
6
From this point, computer operation is required. Go to
the Start Menu and select Bluetooth Software Update
Tool . The window on the right will appear when the
tool is launched. Press the Next > button. On the
screen, a window containing all the available Bluetooth
software types will appear.
7
Select the correct type and press the Next > button.
Type A:
Type B:
Type C:
Type D:
Type E:
8
do not use
CDE-125BT/-126BT, CDE-113BT/-114BT,
CDE-103BT/-104BTi, INA-W910R, KCE-250BT
do not use
KCE-400BT, iXA-W407BT
do not use
Select the corresponding file for updating and
press the Next > button.
4
9
If everything is ok, the window on the left will be displayed. If there is no Bluetooth dongle inserted in
the computer, or if Bluetooth is not activated on the computer, or if there is a problem with the
Bluetooth device drivers, the window on the right will appear.
If the problem continues to exist after you press the button Test Bluetooth , the popup on the left will
appear. If the problem is solved, when you press the button Test Bluetooth , the popup on the right
will be displayed. In this case, press the Next > button and the window on the above left will
appear.
10
When you have reached the window on the right,
press the Search Devices button and the
Bluetooth Software Update Tool will start looking
for available Bluetooth devices.
5
11
When the search is finished, the available
devices are displayed in a window as shown on
the right. Select your Alpine Bluetooth device
and press the Next > button.
12
Set Bluetooth communication with the PC.
But do not start Bluetooth Software Update Tool here.
For Type D:
KCE-400BT, iXA-W407BT
For Type B:
CDE-125BT/-126BT, CDE-113BT/-114BT,
CDE-103BT/-104BTi, INA-W910R, KCE-250BT
Before starting the update, the Bluetooth
Software Update Tool will ask for pairing for the
Alpine Bluetooth device. Enter the PIN code
0000 .
13
When you have reached the window on the right,
press the Search Devices button and the
Bluetooth Software Update Tool will start looking
for available Bluetooth devices.
6
Move to the next step.
14
When flashing stops, this window appears.
Press the Finish button. Also, after FIRMWARE
UPDATE END PLEASE PUSH ANY BUTTON
message appeared on Head Unit display, press any
button on Head Unit to exit from the software update
mode.
15
Turn the ACC off for software update finalization on
KCE-400BT, iXA-W407BT and press RESET switch of
CDE-125BT/-126BT, CDE-113BT/-114BT,
CDE-103BT/-104BTi, INA-W910R, KCE-250BT
(this procedure is described in the Head Unit manual).
Check the software version again to confirm that the
software update was done successfully.
When software version number displayed as 000 , turn
the ACC off and on again for refreshment.
7
Error Messages
Update
situation
Error message
Action
Bluetooth
connection
The communication with the device
could not be established.
Cannot communicate between PC and Alpine Bluetooth device, or Alpine
Bluetooth device is not working.
• Confirm Bluetooth device on PC, or try turning off and on ACC for the
Alpine Bluetooth device.
Device
authentication
The specified file in invalid or corrupted.
Please get the correct version and check
the website, and try again.
Wrong software selected for updating.
• Check the website and get correct software for using your Alpine
Bluetooth device.
The device could not be authenticated.
Make sure the device is running and
check the connection.
Alpine Bluetooth device cannot be authenticated.
• Check that Alpine Bluetooth device is selected as update target.
• Check the connection of the Alpine Bluetooth device.
Software
verification
Information zone could not be retrieved.
This message will appear when Alpine Bluetooth device’s software is
unable to update.
• Try turning off and on the ACC for the Alpine Bluetooth device.
• If situation does not change after ACC off/on, please contact an Alpine
service center.
Flash erasing
The update mode could not be
negotiated. Please try again.
This message will appear when the wrong type of software is selected
(i.e., Type-A for KCE-400BT, iXA-W407BT).
• Select correct type of software.
• When this error occurs on CDE-125BT/-126BT, CDE-113BT/-114BT,
CDE-103BT/-104BTi, INA-W910R, KCE-250BT, please turn ACC off and
on before retrying software update.
An error occurred during the flash
erasing. Please try again.
An error other than the above occurred.
• Try software updating again from the first step.
The information zone could not be
changed. Please try again.
Error for software update by new version.
• Try software updating again from the first step.
No error message appears.
When checking software version on Head Unit, it was not changed.
• Confirm software version and try software updating again from the first
step.
Software
updating
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising