HPRT HT100, HT130 User Manual

HPRT HT100 is a versatile label printer designed for various applications. With its compact size and lightweight design, it's easy to carry and use wherever you need it. HT100 offers high-quality printing with a resolution of 203 dpi, ensuring sharp and legible labels. It supports a wide range of label sizes and materials, making it suitable for diverse labeling needs. Additionally, HT100 features multiple connectivity options, including USB and optional interfaces, providing flexibility in connecting to different devices.

PDF Download

Document

Label Printer

User Manual

HT100

HT130

HT100/HT130 User Manual

Xiamen Hanin Electronic Technology Co.,Ltd

ADD: Room 305A,Angye Building,Pioneering Park,

Torch High-tech Zone,Xiamen,China.

Tel.:

Fax:

Web:

+86-(0)592-5885993

+86-(0)592-5885992 www.hprt.com

Rev.1.2

HT100/HT130 User Manual

MANUAL INFORMATION .................................................................................................................

IMPORTANT SAFETY INSTRUCTIONS ...............................................................................................

CHAPTER 1 INTRODUCTION ............................................................................................................

1.1 Packing List .............................................................................................................................

1.2 Appearance and Components ................................................................................................

1.3 Dimension ..............................................................................................................................

CHAPTER 2 SPECIFICATIONS ............................................................................................................

CHAPTER 3 INSTALLATION & USAGE .............................................................................................

3.1 Media Loading ......................................................................................................................

3.2 Power Connection ................................................................................................................

3.3 Peripherals Connection .......................................................................................................

3.4 Detection ..............................................................................................................................

3.5 Operation Panel ...................................................................................................................

3.6 Basic Function ......................................................................................................................

CHAPTER 4 INTERFACE ..................................................................................................................

4.1 USB Interface ........................................................................................................................

4.2 Other Optional Interfaces ....................................................................................................

CHAPTER 5 MAINTENANCE & ADJUSTMENT .................................................................................

5.1 Cleaning Media Sensor .........................................................................................................

5.2 Cleaning Thermal Print Head ...............................................................................................

5.3 Cleaning Roller and/or Paper Path .......................................................................................

CHAPTER 6 PRINTER UTILITY TOOL INSTRUCTIONS .....................................................................

6.1 Installation Preparation ........................................................................................................

6.2 Usage ....................................................................................................................................

CHAPTER 7 SEAGULL WINDOWS DRIVER INSTRUCTIONS ............................................................

7.1 Introduction .........................................................................................................................

7.2 Installation Preparation ........................................................................................................

7.3 Installation ............................................................................................................................

7.4 Usage ....................................................................................................................................

7.5 Removing ..............................................................................................................................

CHAPTER 8 BARTENDER ULTRALITE INSTRUCTIONS ....................................................................

8.1 Introduction .........................................................................................................................

8.2 Installation Preparation ........................................................................................................

8.3 Installation ............................................................................................................................

8.4 Usage ....................................................................................................................................

Rev.1.2

HT100/HT130 User Manual



Statement

This manual content may be altered without permission, and our company reserves the rights to make changes without notice in technology, spare parts, hardware and software of the products. If more information is needed about the products, please contact our company.

Without any written permission from our company, any section of this manual is prohibited to be copied or transferred in any form.



Copyright

This manual is printed in 2017, the copyright belongs to Xiamen Hanin Electronic Technology Co.

Ltd.

Printed in China

1.2 Version



Warnings

This must be complied with in order to avoid any damage to the human body and the equipment.

This is showing the important information and tips for the printer operation.

Note: Due to continuous update of our product, the description of printer specification, accessories, design in this manual may be slightly different. Please keep in kind prevail.

Rev.1.2

HT100/HT130 User Manual

Manual Information

This user manual contains basic information for product usage as well as for emergency measures that may be required.

The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also included in the manual.

Rev.1.2

HT100/HT130 User Manual

Important Safety Instructions

Before using the appliance, please carefully read the following safety regulations in order to prevent any hazard or material damage.

1.Safety warning

Warnings: The print head will become very hot during printing; avoid contact with the print head after printing has finished.

head.

Warnings: Do not touch the printer head and connector in case static damage the printer

2.Instructions

Warnings: Violating following instructions can cause serious injury or death.

1) Do not plug several products in one multiperture outlet.

• This can provoke over-heating and a fire.

• If the plug is wet or dirty, dry or wipe it before usage.

• If the plug does not fit perfectly with the outlet, do not plug in.

• Be sure to use only standardized multiperture outlet.

2) You must use the supplied adapter.

• It is dangerous to use other adapters.

3) Do not pull the cable to unplug.

• This can damage the cable, which is the origin of a fire or a breakdown of the printer.

4) Do not plug in or unplug with your wet hands .

• You can be electrocuted.

5) Do not bend the cable by force or leave it under any heavy object.

• A damaged cable can cause a fire.

Rev.1.2

HT100/HT130 User Manual

Note: Violating following instructions may cause slight damage of the appliance.

1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following measures.

• Switch off the printer and unplug the set from the mains.

• After the disappearance of the smoke, call your dealer to repair it.

2) Install the printer on the stable surface.

• If the printer falls down, it can be broken and you can hurt yourself.

3) Use the approved accessories only and do not try to disassemble, repair or remodel it by yourself.

• Call your dealer when you need these services.

• Do not touch the blade of auto cutter.

4) Do not let water or other foreign objects drop into the printer.

• If this happened, switch off and unplug the printer before calling your dealer.

5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.

• Switch off and unplug the printer before calling your dealer.

6) Other considerations:

• Place the printer on a solid and even base so that it cannot fall.

• Leave enough space around printer for operation and maintenance.

• Keep all liquids away from the printer.

• Do not expose the printer to high temperatures, direct sunlight or dust.

• Ensure the printer is connected to a socket with the correct mains voltage.

• Switch off the printer POWER supply when it’s not in use for a long time.

• To ensure the printing quality and reliability, suggest use the same quality or recommend paper supplier.

• Pls. switch off the POWER supply when connect/disconnect all the ports or it will cause damage to the printer control circuit.

• Never carry out maintenance or repair work yourself. Always contact a qualified service

Technician.

• Keep this User Manual in a place which is easily accessible at all times.

3.Other Precautions

The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Our company is not legally liable for any damages resulting from the use of the information in this manual. Our company and its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the operation and maintenance information and instructions provided by our company, as well as from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. We are not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not authentic or authorized products.

Rev.1.2

HT100/HT130 User Manual

4.WEEE (Waste Electrical and Electric Equipment)

This mark shown on the product or its literature indicates that the corresponding item should not be discarded at the end of its working life with other household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate marked items from other types of waste and recycle them responsibly to promote the sustained reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office for details of where and how they can conduct environmentally safe recycling of such items. Commercial users should contact their suppliers and check the terms and conditions of purchase contracts. This product should not be combined with other commercial waste for disposal.

Caution: This is a Class A product. In a domestic environment this product may cause radio interference in which the user may be required to take adequate measures .

Rev.1.2

HT100/HT130 User Manual

Chapter 1 Introduction

1.1 Packing List

Note:

1. Unpack the printer and keep the packing material in case you need to ship the printer in the future.

2. Any damages exist, please contact the local dealer.

Printer

USB Cable

AC Adapter

Label Roll

CD Quick Start Guide

Note ： The packing materials are actually based on the order.

Power Cord

Ribbon

Rev.1.2

1.2 Appearance and Components

￭ Front View

HT100/HT130 User Manual

￭ Rear View

Rev.1.2

HT100/HT130 User Manual

￭ Inside View

Note ： The views above are for your reference. Ports vary by your choice.

Rev.1.2

1.3 Dimension

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

Chapter 2 Specifications

(2/1)

Printing

Processor

Memory

Detection

Media

Ribbon

Software

Resident Fonts

Download Fonts

Items

Programming Language

Asian Fonts

Parameter

Printing Method

Resolution

Printing Speed

Printing Width

Printing Length

HT100

203dpi(8dots/mm)

127mm/s Max.

108mm Max.

15mm - 1200mm

NUC976

HT130

Thermal Transfer/Direct Thermal Printing

300dpi(11.8dots/mm)

102mm/s Max.

106mm Max.

RAM 32MB

Flash 16MB

Sensors

Types

Width

Thickness

Adjustable reflective sensor, Fixed transmissive sensor(Central aligned), Head-up sensor, Ribbon end sensor

Roll-fed or Fan-fed, Die-cut or Continuous label, Tag stock,

Continuous receipt paper

0.79’’(20mm) – 4.65’’(118mm)

0.003’’(76.2um) – 0.007’’(177.8um)

Label Roll Diameter 5’’(127mm)

Core Diameter 0.5’’(12.7mm),1’’(25.4mm),1.5’’(38mm)

Types

Width

Length

Core Diameter

Wax, Wax/Resin, Resin

1.33’’(33.8mm) – 4.33’’(110mm)

328’(100m)

0.5’’(12.7mm)

TSPL, ZPL

Label Design HPRT BarTender Ultralite

Seagull Driver

Bitmap Fonts

TTF Fonts

Bitmap Fonts

Windows 2000,Vista,7,8,10

Fonts 0-8 / Fonts A-H,0,GS,P-V 90 ° , 180 ° , 270 ° rotatable. 10 times maximun expandable in horizontal and vertical directions.

Monotype CG Triumvirate™ scalable true type font

90°, 180°, 270° rotatable, single characters 90°, 180°, 270° rotatable

16x16, 24x24. Traditional Chinese, Simplified Chinese,

Japanese , Korean

Code Pages

Barcode

Interfaces

Operation Panel

Standard

Option

DOS437,720,737,755,775,850,852,855,856,857,858,860,86

2,863,864,865,866,

Windows1250,1251,1252,1253,1254,1255,1256,1257,1258

ISO8859-1,-2,-3,-4,-5,-6,-8,-9,-15

DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)

Code 39, Code 93, Code 128UCC, Code 128 subset A, B, C,

Codabar, Interleave 2 of 5, EAN-8, EAN-13, EAN-128,

UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI,

PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code 11

PDF417, Maxicode, DataMatrix, QR Code, Aztec

USB,RS232,Ethernet

Bluetooth, WiFi (distributor install)

Feed button with tri-color LED

Rev.1.2

HT100/HT130 User Manual

Items

Power

Environment

Physical Characteristics

Operation

Storage

Dimension(L*W*H)

Weight

Options & Accessories

Agency Approvals

Parameter

AC/DC switching power adapter

I/P: AC100-240V, 50/60Hz, O/P: DC 24V/2.5A

41 ℉ (5 ℃ )-104 ℉ (40 ℃ ) ， 30%-85%(non-condensing)

-4 ℉ (-20 ℃ )-122 ℉ (50 ℃ ) ， 10%-90%(non-condensing)

240*198*171mm

(2/2)

2.26kg(excluding consumables)

External label roll holder for 8’’ (203mm) OD label rolls

Electric cutter module

Label dispenser module

CCC,FCC,CE

Rev.1.2

HT100/HT130 User Manual

Chapter 3 Installation & Usage

3.1 Media Loading

3.1.1 Paper Roll Loading

1.Pull and lift the cover.

2.Pull the roll holders open and place the roll between them.

Rev.1.2

3.Press down the locking tab.

HT100/HT130 User Manual

4.Pass the labels through label guides and adjust label guides to label’s width.

Note: If your printer is under Thermal Line Printing Method, press down the printer cover until it snaps closed. Otherwise, continue the procedure in chapter 3.1.2.

Rev.1.2

HT100/HT130 User Manual

3.1.2 Ribbon Loading

1.After putting rewind spindle through printhead module, insert the right side of supply spindle into the rear pin, and then insert the left side into the rear wheel. Then do the same procedure for the ribbon rewind spindle.

2.Rotate the rear ribbon wheel until the ribbon is pulled tightly.

Rev.1.2

3.Press the lock and close the cover slightly.

HT100/HT130 User Manual

4.Press down the cover until it snaps closed.

Rev.1.2

3.1.3 External Paper Roll Loading

If the paper roll is extremely large, users can load the paper roll outside(See the graph at right). Pass the paper through the external feed slot and then through the paper guides.

Adjust the paper guides according to the paper width.

HT100/HT130 User Manual

Rev.1.2

3.2 Power Connection

1.Make sure the printer’s power switch is in the off position.

2.Connect the AC adapter to power receptacle.

3.Connect the power cord to AC adapter.

4.Connect the other end of power cord to the outlet.

HT100/HT130 User Manual



Note ：

Use the original power adapter only. Avoid the damage caused by charging improperly.

Please unplug the printer power cord if it is not in use for a long time.

Rev.1.2

HT100/HT130 User Manual

3.3 Peripherals Connection

3.3.1 Interface Cable Connection

The standard for the printer’s interface cable shows in the following.

- USB B-Type Cable

- RS-232C Cable

- RJ45 Cable

Please follow the instructions to connect the cable.

1. Make sure the printer is turned off.

2. Please plug in the cables.

-Insert the USB B-Type cable into the USB port.

-Insert the RS-232C cable into the serial port.

-Insert the RJ45 cable into the ethernet port.

3.3.2 Bluetooth Connection

PDA with Bluetooth interface, laptop and other information terminals can drive the mobile thermal printer. Instructions as follows:

1. Power on printer.

2. Primary device search for outer Bluetooth devices.

3. If there are some outer Bluetooth devices, choose HT100/130.

4. Finish pairing.

Detailed pairing methods, please refer to primary devices Bluetooth Names. After pairing, primary devices with virtual Bluetooth interface (smart phone , pocket PC, palm, notebook) can drive mobile thermal printer to print through such virtual Bluetooth interface.

Note: The original code is 1234.

Rev.1.2

HT100/HT130 User Manual

3.4 Detection

When printing paper, the moveable label sensor is used to detect paper. The label sensor moves differently when using various kinds of paper. If user moves the sensor improperly, paper may not be detected, therefore the printer could not print paper. The following instructions tell users how to use label sensor correctly. Please read it carefully.

3.4.1 Continuous Paper

When printing continuous paper (Figure 1), the sensor shall be aimed at the left photoelectric hole (Figure 2), which is the original position.

Figure 1 (Continuous Paper)

Rev.1.2

HT100/HT130 User Manual

Rev.1.2

Figure 2 (Left)

HT100/HT130 User Manual

3.4.2 Labels

When printing labels (Figure 3) or double-row labels (Figure 4), the sensor shall be aimed at the left photoelectric hole (Figure 5), which is the original position.

Figure 3 (Labels)

Rev.1.2

Figure 4 (Double-row Labels)

HT100/HT130 User Manual

Rev.1.2

Figure 5 (Left)

HT100/HT130 User Manual

3.4.3 Punched Hole Label

When printing punched hole labels, move the sensor until it’s aimed at the right photoelectric hole (Figure 6).

Rev.1.2

Figure 6 (Right)

HT100/HT130 User Manual

3.4.4 Blackmark Paper

When printing blackmark paper (Figure 7), the sensor shall be aimed at the position of black mark (Figure 8).

Figure 7 (Blackmark Paper)

Rev.1.2

Figure 8 (aimed at blackmark’s position)

HT100/HT130 User Manual

3.5 Operation Panel

1.FEED button

Turn on the printer. Press the feed button, and printer will automatically feed a label under

“Label Mode”. Press the feed button, and the printer will feed the fixed distance under

“Continuous Mode”.

When the printer is printing, press the feed button so that the printing job pauses. At that time the LED indicator is white. When press this button again, the printing job continues.

2.Description of indicator status

Color Action Indicator Status

Blue

Purple

Red

Orange

Green

Lit on

Slow flash

Lit on

Slow flash

Lit on

Slow flash

Quick flash

Lit on

Quick flash

Lit on

Slow flash

Quick flash

Ready

Dump mode

Overheat of printhead

Ribbon out

Head up

Paper out or paper jam or label’s separation

Abnormal label calibration

Out of ready

Data is written on flash

Printing

Pause of printing

Receiving data

Rev.1.2

HT100/HT130 User Manual

3.6 Basic Function

3.6.1 Power On/ Power Off

Press “O” to power off the printer. Press “l”to power on the printer.

3.6.2 FEED Button

1.Turn on the printer. Press the feed button, and printer will automatically feed a label under

“Label Mode”. Press the feed button, and the printer will feed the fixed distance under

“Continuous Mode”.

2.When the printer is printing, press the feed button so that the printing job pauses. At that time the LED indicator is white. When press this button again, the printing job continues.

3.6.3 Quick Calibration



Note: Users must carry out the calibration under the conditions below:

The first time to use the printer since installation;

The first time to use the printer since sensor cleaning;

Reuse the printer when it has not been used for a long time;

Change a new type of media;

Printer cannot recognize the mark;

Huge change of the operating environment;

Calibration method:

1.Carry out the calibration manually.

When printer is ready, press the FEED button for 3 seconds until the status indicator(Blue) flashes twice. Then release the button, and printer will start to do the calibration. When printer does the calibration under Continuous Media Mode, the calibration is invalid.

2.Carry out calibration by printer utility tool. Please refer to detailed information in “Chapter 6

Label Printer Utility Instructions”.

Note: After the quick calibration, users could open the printer cover to pull back the learned paper in avoid of paper wasting.

Rev.1.2

HT100/HT130 User Manual

3.6.4 Print Self-test Page

The self-test checks the printer’s current settings, status and whether the printer has any problems or not.

1.Printing Manually

1) Make sure the roll is loaded properly.

2) Make sure the top cover of the printer is closed properly. Then turn on the printer.

3) When the printer is ready, press the feed button continuously. As soon as the indicator flashes (green) once, loosen the button. Then the printer starts to print the self-test page.

2.Printing by Windows Driver Program

1) Install the Windows Driver program.

2) Set the “Interface” as the type you use.

3) Use the Windows Driver Program to print out the “Self-test page”.

4) Please refer to “Chapter 7 Seagull Windows Driver Instructions” for more detailed information.

3.Printing by HPRT BarTender Ultralite Program

1) Install the HPRT BarTender Ultralite program.

2) Edit a new label and print it.

3) Please refer to “Chapter 8 BarTender Ultralite Instructions” for more detailed information.

Rev.1.2

4.1 USB Interface

Chapter 4 Interface

HT100/HT130 User Manual

4.2 Other Optional Interfaces

 Serial Port

SIGNAL NAME

VBUS

D-

D+

GND

SIGNAL NAME

+5VDC

TXD

RXD

GND

RTS

CTS

RTS

Rev.1.2

 Ethernet Port

SIGNAL NAME

TX+

TX-

RX+

RX-

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

Chapter 5 Maintenance & Adjustment

Adhesives and coatings of the media can transfer to the printer parts over time along the media path including the thermal print head and media sensor. This build-up can accumulate dust and debris. Failure to clean the print head, media path, and media sensor could result in inadvertent loss of labels, label jams and possible damage to the printer.



Note:

Make sure to turn off the printer prior to cleaning.

As the print head gets hot during printing, if intending to clean the print head, turn the printer off and wait approximately 2~3 minute before commencement.

When cleaning the print head, take care not to touch the heated portion of the print head.

Print Head is susceptible to damage from static electricity, etc. So it is strongly recommended to wear hand gloves during cleaning progress.

Take care not to allow the print head become scratched and/or damaged in any way.

5.1 Cleaning Media Sensor

Debris or dirt on the paper sensor can cause a miss-read or unstable detection of the label gap.

Clean with a cotton bud dampened with alcohol.

5.2 Cleaning Thermal Print Head

Thermal Paper stock on the print head, which degrades print quality. Clean the print head with methanol or isopropyl alcohol and a cotton bud. Do not touch the heating elements with your fingers.

1) Open the Printer Cover and then use the cleaning pen to clean the head in the direction from the center of the head to two sides.

2) After cleaning the head, do not use the printer until the alcohol used for cleaning evaporates completely (1~2 min) and the printer has completely dried.

3) Perform the cleaning process each time the paper roll is replaced to prevent print quality deterioration.

5.3 Cleaning Roller and/or Paper Path

1) Open the printer cover and then remove the paper.

2) Remove any dust or foreign substance using dry cloth or cotton swab.

3) Soak the cloth or cotton swab in alcohol for medical use and use it to remove adhesive foreign substances or other pollution materials.

4) After cleaning the parts, do not use the printer until the alcohol evaporates completely (1~2 min) and the printer has completely dried

Note: Clean the parts when print’s quality or label detection degrades.

Rev.1.2

HT100/HT130 User Manual

Chapter 6 Printer Utility Tool Instructions

6.1 Installation Preparation

Download application program in CD. eg: HPRTUtilityForLabel_Channel V2.0.0.3.

6.2 Usage

Note: The screen may vary slightly by different operating systems and models. Take printer HT100 as example. Please refer to printer HT100 when using printer HT130.

(1)Download “HPRTUtilityForLabel_Channel V2.0.0.3” in CD, then open the

“HPRTUtilityForLabel_Channel.exe”.

Rev.1.2

HT100/HT130 User Manual

(2)Add/Modify/Delete Printer, Connect Test.

●Click “Add Printer”. Choose the printer and port(eg: USB), then click “OK”, showed in “Printer

List”.

Rev.1.2

HT100/HT130 User Manual

●Click “Modify Printer”. Choose the printer and port(eg: COM1), then click “OK”, showed in

“Printer List”.

Rev.1.2

HT100/HT130 User Manual

●Click “Delete Printer”. Click “OK” to delete the printer, and click “Cancel” to cancel the command.

●Click “Connect Test” to test whether the connection is successful or not.

If connection succeeds, it shows as follows.

If connection fails, it shows as follows.

Note:

1.Connect printer to power first, then choose one port (depended on the printer you bought) to connect to the PC. Much more information of connecting method is contained in “3.3

Peripherals Connection”.

2.When connection fails, please check the connection and whether it matches or not.(When

USB port is used, it is better to connect one printer only.)

Rev.1.2

HT100/HT130 User Manual

(3)Function.

●Click “Printer Information”, showing printer information.(varies by different printers)

●Click “Print Test Text”. Type the text and set up the printing range. Click “Print”, then printer starts to print the test text.

●Click “Print Self Information”, then printer starts to print self-test page.

●Click “Label Auto Learn”, then printer will carry out the calibration.

Rev.1.2

HT100/HT130 User Manual

●Click “Parameter Setting”. User can set up the BT config, print type, paper mode and so on.

Click “Set”, and back to the main menu.

●Click “Model Print Test”, then printer starts to print models.

●Click “Restore Factory Settings”. Click “OK” to restore factory settings, and click “Cancel” to cancel the command.

(4)Click “Quit”, then finish the settings.

Rev.1.2

HT100/HT130 User Manual

Chapter 7 Seagull Windows Driver Instructions

7.1 Introduction

The following operating systems are supported:

Microsoft Windows 10 (32 bit/64 bit)

Microsoft Windows 8 (32 bit/64 bit)

Microsoft Windows 7 SPI (32 bit/64 bit)

Microsoft Windows Vista SP2 (32 bit/64 bit)

Microsoft Windows Server 2012(64 bit)

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2008 SP2(32 bit/64 bit)

Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)

7.2 Installation Preparation

Download Seagull Windows Driver application program in CD.

Rev.1.2

HT100/HT130 User Manual

7.3 Installation

Note:

 Under different operating systems, the screen may be slightly different. Take Windows 7 as example.

 Take printer HT100 as example. Please refer to printer HT100 when using printer HT130.

 To avoid the prevention, recommend to close the security software before installation.

1.Select one interface to connect your printer to computer.

2.Turn on the printer and check if it is connected to computer successfully.

3.Double click Seagull Windows Driver .

4.Read and agree the license agreement. Then click “Next”.

Rev.1.2

5.Choose the installation directory, then click “Next”.

HT100/HT130 User Manual

6.Click "Finish".

Rev.1.2

7.Choose "Install printer drivers" , then click "Next".

HT100/HT130 User Manual

Note: If you have connected the printer to computer, it will detect and install the driver automatically.(eg.: USB port)

8.Choose "Install a driver for a Plug and Play printer, then click "Next".

Rev.1.2

9.Enter a name for this printer, then click "Next".

HT100/HT130 User Manual

10.Click"Finish".

Rev.1.2

11.Click "Close", and the printer driver is installed successfully.

HT100/HT130 User Manual

12.After installation, the icon will be found in ”Start”→“Devices and Printers”.

Note:

1.If you have already installed the driver (No matter what kind of ports), it will generate a USB port automatically when connecting the printer to computer.

2.Any problems exist, please use our utility tool in CD.

Rev.1.2

HT100/HT130 User Manual

7.4 Usage

7.4.1 Printing Preferences

1.Click “Start” → “Devices and Printers”. Right click the icon and choose “Printing preferences”.

Rev.1.2

2.According to different needs, set up the page.

HT100/HT130 User Manual

● Click “Stock” →” Name ”, and choose the paper type.

Rev.1.2

● Click “New Stock”, and set up a new stock.

HT100/HT130 User Manual

● Click “Edit Stock”, and edit the stock.

Rev.1.2

● Click “Delete Stock”, and delete the stock.

● Choose “Orientation” or “Effects”, showed in the “Preview”.

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

Rev.1.2

● Click “Preset” → “Name”, and back to the default settings.

HT100/HT130 User Manual

● Click “Manage”, and change the settings.

Rev.1.2

3.Click “Graphics”, and edit the pictures.

HT100/HT130 User Manual

4.Click “Stock”.

Rev.1.2

●Click “Method”, and choose the printing method.

HT100/HT130 User Manual

●Click “Type”, and choose the printing type.

Rev.1.2

●Click “Post-Print Action”, and choose the method of media handling.

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

7.4.2 Printer Properties

1.Click “Start” → “Devices and Printers”. Right click the icon and choose “Printer properties”.

Rev.1.2

HT100/HT130 User Manual

2.Click “General” → “Print Test Page”, and printer will print labels with current settings.

Rev.1.2

3.Click “Ports”, then choose the port needed.

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

7.4.3 Label’s Width

USER(4.00 in×4.00 in)

2×4(2.00 in×4.00 in)

4×4(4.00 in×4.00 in)

4×6(4.00 in×6.00 in)

7.5 Removing

Note: Please turn off the printer or unplug the USB cable before removing the driver.

1.Double click Seagull Windows Driver .

2.Read and agree the license agreement. Then click “Next”.

Rev.1.2

3.Choose the installation directory, then click “Next”.

HT100/HT130 User Manual

4.Click"Finish".

Rev.1.2

5.Select “Remove printer drivers”, then click “Next”.

HT100/HT130 User Manual

6.Select “Remove printers”, then click “Next”.

Rev.1.2

7.Select printer’s name, then click “Next”.

HT100/HT130 User Manual

8.Please unplug the USB cable or turn off the ptinter when appearing the following prompt.

Rev.1.2

HT100/HT130 User Manual

9.Click “Finish”.

10.Restart the computer when appearing the following prompt, or continue step 11.

Rev.1.2

11.Click “Close”. The driver has been removed successfully.

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

Chapter 8 BarTender Ultralite Instructions

8.1 Introduction

This chapter provides instructions on BarTender Ultralite program according to PC operating systems(OS).

The followings are supported.

Microsoft Windows 10 (32 bit/64 bit)

Microsoft Windows 8 (32 bit/64 bit)

Microsoft Windows 7 SPI (32 bit/64 bit)

Microsoft Windows Vista SP2 (32 bit/64 bit)

Microsoft Windows Server 2012(64 bit)

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2008 SP2(32 bit/64 bit)

Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)

8.2 Installation Preparation

Download BarTender Ultralite application program in CD.

Rev.1.2

HT100/HT130 User Manual

8.3 Installation

Note ：

 Under different operating systems, the screen may be slightly different. Take Windows 7 as example.

 Take printer HT100 as example. Please refer to printer HT100 when using printer HT130.

 To avoid the prevention, recommend to close the security software before installation.

1.Double click the application program .

2.Select language, then click "OK".

3.Click "Install".

Rev.1.2

4.Click “Next”.

HT100/HT130 User Manual

5.Read and accept the license agreement, then click "Next".

Rev.1.2

6.Select "Features" and installation location, then click "Next".

HT100/HT130 User Manual

7.Click "Install".

Rev.1.2

8.Click "Finish".

HT100/HT130 User Manual

9.Back to desktop, and you will see the icon of BarTender Ultralite. Double click it and get down to use.

Rev.1.2

HT100/HT130 User Manual

8.4 Usage

8.4.1 Page Settings

1.Double click the icon, then choose the edition. Click “OK”. (The edition may be changed according to different needs.)

2.Click “Start a new BarTender document”.

Rev.1.2

3.Choose “Blank Template”, then click “Next”.

HT100/HT130 User Manual

4.If the predefined stocks don’t meet your need, tick “Specify Custom Settings”. Then click”Next”.

Rev.1.2

HT100/HT130 User Manual

5.Tick “Single item per page”, then click “Next”. (If you print multiple labels, tick “Multiple columns and/or rows of items per page ”.)

6.Edit the side edges, then click “Next”.

Rev.1.2

7.Choose the item shape, then click “Next”.

HT100/HT130 User Manual

8.Edit the template size, then click “Next”.

Rev.1.2

9.Based on your need, edit the template background. Then click ”Next”.

HT100/HT130 User Manual

10.Finish the settings, showed in the “Review” and “Preview”. Then click “Finish”.

Rev.1.2

8.4.2 label Edit

1.Click the icon of code .

2.Choose the code, then click “Select”.

HT100/HT130 User Manual

Rev.1.2

3.Click the blank, showing the code.

HT100/HT130 User Manual

Rev.1.2

HT100/HT130 User Manual

4.Double click the code and edit it. User can set up the size, font, border and so on.

Finishing the changes, click “Close”.

Rev.1.2

5.Click the icon of character , then enter the text.

HT100/HT130 User Manual

Rev.1.2

6.Click the icon of picture , then edit the pictures.

HT100/HT130 User Manual

Rev.1.2

7.Compose the text.

HT100/HT130 User Manual

8.Finish all the settings. Click “Print” and a new label will be printed.

Rev.1.2

Hello! I am an AI chatbot specifically trained to assist you with the HPRT HT100 HT130 User Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated