SAT ready radios must go through the Preset Set Up Procedure in
Section 3-1-2 in order for the Folder Mode to work properly.
[email protected]
print date: 1.20.2010
SECTION 1. ABOUT PA15-NIS INTERFACE
1-1 Introduction
1-2 Text Display of Song Information
1-3 Package Content
1-4 Compatibility
1-5 Applications
verified the published radio and vehicle application to the best of
our ability. Due to uncontorllable factors,
can not 100% guarantee
every pubilshed applications. These factors include variables such as, anom
-alies within a factory radio, factory radio heretofore unknown to
and partial model year changes.
SECTION 2. Playlist Mode, Direct Mode, Folder
Mode and AUX Option
2-1 Direct Mode
2-2 Folder Mode
2-3 Playlist Mode
2-4 AUX Input Option
SECTION 3. Mode Setting and Function Control
3-1 Folder Mode + Direct Mode Configuration
3-1-2 Folder Mode Set Up on the Radio
Step 8. iPod music will play through the radio.
Step 9. If radio has a Preset A-B-C button, select “A” preset group by pushing the “preset
A-B-C” button.
If radio has SAT1 and SAT2 buttons then push the SAT1 button.
Step 8. When radio displays CH 1, push-n-hold the preset button #1 for about 3 seconds or
unitl a beep is heard.
Step 9. Push the Track Up button to CH2. (Note: find out which button on your radio is for
Track Up from Section 1-5 Application table and Section 3-1-3 table).
Step10. When radio displays CH2, push-n-hold the preset button #2 for about 3 seconds or
until a beep is heard.
Step 11. Repeat Step 9 and Step 10 to finish the set up of CH3 to CH6 and Preset #3 to
preset #6.
3-1-3 Functions and Radio Buttons
3-1-3 Connecting and Playing iPod
3-1-5 Switching Between SAT receiver and iPod
3-2 Playlist Mode + Direct Mode Configuration
3-2-1 Set DIP switches as follow:
3-2-2 Radio Buttons and Functions
3-2-3 Connecting and Playing iPod
3-2-4 Switching Between iPod and Slave-CD changer
SECTION 4. CABLE CONNECTION
SECTION 5.
Playlist Naming
">
