TVLogic LUM-240G Operation Manual

Multi Format
4K LCD Monitor
Operation Manual_v1.9
LUM-240G
Contents
1. Caution .......................................................................................
2. Main Features..............................................................................
3. Controls & Functions ....................................................................
4. Menu Organization & Adjustment .................................................
5. Menu Operations .........................................................................
[1] PICTURE & VIDEO ...................................................................
[2] COLOR ..................................................................................
[3] GPI ........................................................................................
[4] MARKER ...............................................................................
[5] LUMA(Y”) & FOCUS ................................................................
[6] AUDIO ....................................................................................
[7] DISPLAY & SET ......................................................................
[8] INFORM. ................................................................................
6. Video Support Resolution ...........................................................
7. Product Specifications ................................................................
04
06
07
11
13
13
14
16
18
20
21
22
24
25
27
4K LCD Monitior 3
1. Caution
Always use set voltage.
●● AC 100 ~ 240V (1.6A/50~60Hz)
●● DC 12/24V
●●
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions must
be kept in safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate attachments can result in accidents.
• This product must be operated on a power
source specified on the specification label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• In case of using other DC adapters instead of
the standard adapter provided by the manufacturer, please check the proper load
capacity (or current capacity) and use an
adapter with stable voltage.
• Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
4 4K LCD Monitor
• Never insert an object into the product
through vents or openings. High voltage flows
in the product, and inserting an object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid
on the product.
• Do not attempt to service the product yourself.
Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.
• If any of the following conditions occurs,
unplug the power cord from the AC outlet, and
request a qualified service person to perform
repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operating instructions. Do
not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described
in the instructions can cause damage, which
often requires extensive adjustment work by a
qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs
servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original
parts. Use of unauthorized parts can result in
fire, electric shock and/or other danger.
1. Caution
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.
• When mounting the product on a wall or
ceiling, be sure to install the product according to the method recommended by the
manufacturer.
• Unplug the power cord from the AC outlet
before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
• Keep the product away from direct rays of the
Sun-light.
• Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on
an unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a cart,
it must be moved with the utmost care.
Sudden stops, excessive force and uneven floor
surface can cause the product to fall from the
cart.
• The vents and other openings in the cabinet
are designed for ventilation. Do not cover or
block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the LCD panel breaks.
• Keep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including amplifiers).
4K LCD Monitor 5
2. Main Features
LUM-240G Monitor contains the following features:
●●
Compatible with various SDI signal formats
●●
- Wide Viewing Angle, Active Loop Through(SDI), VESA Mounting Standard and
OSD user interface.
* Max. Brightness: 350cd/㎡, Contrast ratio: 1000:1
- This product is compatible with various SDI
signals - 720P, 1080p.
●●
Compatible with various Digital signal formats
- This product is compatible with various HDMI
Digital signals- 50p, 59.94p, 60p.
●●
4K(SMPTE 428-1-2006 : 4096 x2160@24p
/ SMPTE ST 2036-1:2009 : 3840x2160 @23.98p~ 60p) support
- 6G/ 12G is supported only in SDI A, SDI B modes.
●●
Cooling Fan support
- Helps maintain optimal internal operating
temperature.
●●
Remote control function
- This product can simply be remote controlled
by cable connection without additional peripheral equipment attached to unit.
●●
RS422 protocol support
- This product supports protocols provided by
TVLogic.
●●
Ethernet & USB support
- Supports Ethernet and USB connection for
program download, monitor control and color calibration.
●●
HDMI(2.0) support
- 1 x HDMI(2.0) input is available without additional equipment.
●●
SDI 3G support
- Supports 3G-SDI YCbCr/RGB 4:4:4 and YCbCr
4:2:2 formats.
6 4K LCD Monitor
Additional features
●●
Various Color Gamut support
- Supports ITU-R BT. Rec.709, SMPTE-C, EBU,
DCI-P3(color standard of digital cinema), Rec.2020 and Panel Native.
3. Controls & Functions
LUM-240G: FRONT
MENU/EXIT
F5
F4
F5
F3
F4
F2
F3
F1
ENTER
MENU/EXIT
LED
ENTER
POWER
LED
AUDIO OUT
F2
POWER
USB
AUDIO OUT
F1
USB
HDMI
INFO.
SDI SINGLE
HDMI
2 SDI
VIDEO RANGE
INFO.
B.LIGHT
SDI SINGLE
QUAD
VIDEO
RANGE
MARKER
B.LIGHT
ASPECT
2 SDI
QUAD
LUM-240G : REAR
MARKER
SCAN
ASPECT
SCAN
DC OUT
RS-422 IN
DC
OUTOUT
RS-422
RS-422 IN
RS-422 OUT
SDI-IN (A~D)
SDI-OUT (A~D)
SDI-IN (A~D)
DC
IN (A~D)
SDI-OUT
AC IN
DC IN
AC IN
HDMI
REMOTE
HDMI
LAN
REMOTE
AUDIO-IN
LAN
AUDIO-IN
4K LCD Monitor 7
3. Controls & Functions
FRONT
●●
[HDMI] Button/Lamp
- Used to select HDMI input.
●●
[SINGLE-SDI] Button/Lamp
- Used to select SDI input for one channel. Previously selected SDI input selection displays.
- Press the button to move through the modes:
SDI-A -> SDI-B -> SDI-C -> SDI-D
●●
[2SI-SDI] Button/Lamp
- Used to select 2-SAMPLE INT-SDI input signal.
- Press the button to move through the modes:
2SI(4CH)->2SI(2CH)
●●
[QUAD-SDI] Button/Lamp
- Used to select QUAD-SDI input signal.
●●
[F1 ~ F5] Button/Lamp
- Shortcut key for KEY MAPPING feature in the
OSD MENU.
- Selectable options are as follows :
1). BLUE ONLY
- Activates in the order: BLUE ONLY – MONO.
- BLUE ONLY : Used to remove red and green
from the input signal and display the screen
only under a blue signal.
- MONO : Used to remove all colors from the
input signal and display the screen only under white and black signal.
2). H/V DELAY,
- Used to check horizontal and vertical sync.
simultaneously by moving the screen up/
down/left/right.
- In this mode, the brightness of image automatically increase for easy verification
of synchronized signals.
3). COLOR TEMP
- Used to controls the color temperature and allows instant access to preset the color
temperature settings.
4). AUDIO LVM
- Used to activate/deactivate the Audio Level
Meter.
5). TIME CODE
- Used to activate/deactivate the Time Code.
6). LUMA ZONE
- Used to activate/deactivate the Luma Zone
function.
8 4K LCD Monitor
3. Controls & Functions
FRONT
●●
[SCAN] Button
●●
- Used to activate various scan mode (Zero Scan, 2:1 Scan, 1:1 Scan, Fit Width, Over Scan)
●●
●●
- Used to activate/deactivate the OSD menu.
- Press the MENU button again to deactivate
the OSD menu.
[ASPECT] Button
- Used to select ASPECT mode. Available aspect modes are 16:9, 4:3, 2.35:1, 1.85:1, 15:9,
16:10 and Auto.
●●
[MARKER] Button
[B. LIGHT] Button
- Used to activate the Backlight menu. Use the
KNOB button to adjust the value.
●●
[VIDEO RANGE] Button
- Used to select the video range between Full
and Limited(Ex).
●●
[UP/DOWN/ENTER] Knob
- Used to move up/down through the menus
during the OSD menu activation and also to
increase/decrease the value of the selected
feature.
- Press the Knob to confirm a chosen value (or
mode).
- May also be used to control the [Brightness][Contrast]-[Volume] value during the OSD
menu inactivation. Turn the Knob to the left/
right to adjust the value.
- Used to activate/deactivate the Marker.
●●
[MENU/EXIT] Button
●●
[OPERATE] Lamp
- Indicates condition and power status of unit.
Light turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
Normal(active) mode is indicated by a Green
LED light.
- Restores to previous status when monitor
power turns off and comes back on.
[INFO.] Button
- Used to activate the Information window.
●●
[POWER] Button
- Used to turn the power on and off.
●●
[Audio out] (PHONE JACK)
- Selects the left/right Audio embedded signal
output.
●●
[USB]
- Used to convenient update new functions
and programs.
- Used to calibrate the monitor’s color temperature using color calibration tool.
4K LCD Monitor 9
3. Controls & Functions
LUM-240G : REAR
●●
[REMOTE] (RJ-45)
- Provides connection to control equipment
for external monitor control.
- Features can be changed in the GPI section of
the OSD menu.
●●
●●
●●
●●
[Audio in]
- Used to connect the audio input signal.
●●
[LAN]
- Used to control the monitor with a protocol
provided by TVLogic.
[RS422 IN/OUT] (RJ-45)
- Used to control the monitor with a protocol
provided by TVLogic.
●●
[HDMI]
●●
~ AC IN
- 100 ~ 240V AC 50/60Hz
DC IN
- Signal input terminal for HDMI signal.
- 12/24V
[SDI-A,B,C,D] (BNC)
<WARNING!!>
When using the product make sure
to ground, whenever possible, before
connecting the input signal cable in order to
prevent any possible damage to the product
or connected devices. The damage may
include signal noise, malfunction of main
board or display panel. And the connected
devices such as camera or video source
player may also be influenced through signal
cable. Please check if the AC power source
and the power extender or power distributor
is grounded.
- SDI signal input terminal for SDI A,B,C,D signal.
10 4K LCD Monitor
4. Menu Organization & Adjustment
[1] Menu Organization
●●
The product may be controlled and set
system-wise through OSD displayed on
the screen.
[2] Menu Adjustment
●●
[3] Menu Adjustment Procedure
●●
Menu control sequence follows the order
below:
1. Press MENU button to bring the OSD menu
on the screen.
2. Display the desired sub menu with the UP/
DOWN button.
3. After selecting a sub menu, press ENTER to
select an item with the UP/DOWN button.
4. Press ENTER to select the desired item (verified by highlighted field text turning
red)
5. Press ENTER to save the new value after adjusting the value with UP/DOWN button.
(Verified by highlighted field returning to
default black color)
6. Press MENU to remove OSD menu from the
screen.
You may control various functions using MENU, UP/DOWN and ENTER buttons on the bottom front of the monitor.
4K LCD Monitor 11
4. Menu Organization & Adjustment
[4] Menu Tree
PICTURE
Brightness
Marker
Contrast
Center Marker
Chroma
Safety Area
Aperture
Fit Marker
Aspect
Marker Mat
3G format
COLOR
Marker Color
Video Range Select
Marker Thickness
Color Temp.
User Marker H1
Gain Red
User Marker H2
Gain Green
User Marker V1
Gain Blue
User Marker V2
Bias Red
Lv Meter Select
Bias Green
Lv Meter Display
Bias Blue
Lv Meter Reference
Color Copy
Back Light
GPI
MARKER
AUDIO
Lv Meter Decay Time
Lv Meter Size
Color Space
Volume
Gamma Curve
Em. Audio Left
GPI 1 ~ GPI 8
Em. Audio Right
Group ID
User Config Set
Monitor ID
Internal Pattern
DHCP
System Default
IP Address
S/W Upgrade
Subnet Mask
S/W Upgrade Start
Gateway
Time Code
Port No.
Network settings supply
SYSTEM
Key Lock
Key LED
F1 Key Mapping
F2 Key Mapping
F3 Key Mapping
F4 Key Mapping
F5 Key Mapping
12 4K LCD Monitor
5. Menu Operations
[1] PICTURE & VIDEO
●●
3G Format
- Automatically detects when Payload signal
appears in Normal Mode.
- Selects input format for SDI 3G A/B support
(NORMAL MODE, A 444 10BIT_YCbCr, A 444
10BIT_RGB, A 444 12BIT_YCbCr, A 444 12BIT_
RGB, A 422 12BIT_YCbCr, B 444 10/12BIT_
YCbCr, B 444 10/12BIT_RGB, B 422 12BIT_
YCbCr, B 422 10BIT_YCbCr, 60P).
●●
●●
Brightness
- The item controls the degree of brightness
between -100~100.
#Brightness can be adjusted by using a control knob on the front of the monitor.
●●
Contrast
- The item controls contrast ratio between -100~100.
#Contrast ratio can be adjusted by using a control knob on the front of the monitor.
●●
Video Range Select
- Used to select the range of brightness.
* LIMITED(EX) : Output : 16 ~ 255 (HDMI/SDI)
* FULL
: Output : 0 ~ 255 (HDMI/SDI)
* LIMITED : Output : 16 ~ 235(SDI)
* EXTENTION : Input : 16 ~ 235 Output : 0 ~
255 (HDMI)
- In the HDMI mode, activates only when the
color format is RGB. (When the color format is
HDMI YCbCr, this function is not supported.)
Chroma
- The item controls saturation between -50~50.
#Chroma can be adjusted by using a control
knob on the front of the monitor.
●●
Aperture
- The item controls the picture sharpness between 0~24.
#Sharpness can be adjusted by using a control
knob on the front of the monitor.
●●
Aspect
- Used to change the various display ratio.
- Only available in Single 3G Mode.
4K LCD Monitor 13
5. Menu Operations
[2] COLOR
●●
Bias Red
- Used to set Red Bias from -100 to 100.
- Adjusts the red color of dark section.
- Only available in CUSTOM 1/2/3 mode.
●●
Bias Green
- Used to set Green Bias from -100 to 100.
- Adjusts the red color of dark section.
- Only available in CUSTOM 1/2/3 mode.
●●
●●
●●
Gain Red
- Used to set Red Gain level from -256 to 255.
- Adjusts the red color of bright section.
- Only available in Custom 1/2/3 mode.
●●
Gain Green
- Used to set Green Gain level from -256 to 255.
- Adjusts the red color of bright section.
- Only available in Custom 1/2/3 mode.
●●
- Used to set Blue Bias from -100 to 100.
- Adjusts the red color of dark section.
- Only available in CUSTOM 1/2/3 mode.
Color Temp
- The item controls color temperature and allows instant access to preset color temperature settings of 3200K, 5600K, 6500K,
9300K and USER 1/2/3.
- Only in User1/2/3, RGB Gain, Bias(=Offset)
and Color copy are activated.
Gain Blue
- Used to set Blue Gain level from -256 to 255.
- Adjusts the red color of bright section.
- Only available in Custom 1/2/3 mode.
14 4K LCD Monitor
Bias Blue
●●
Color Copy
- Used to copy the R/G/B Gain value of pre-
stored color temperature settings.
- In Custom mode, find and select the color
temperature to be used by turning the Knob
button and press the KNOB button to copy
and apply the Gain value to Gain Red, Gain Green,
Gain Blue.
- Only available in CUSTOM 1/2/3 mode.
5. Menu Operations
[2] COLOR
●●
Back Light
- Used to control the backlight level of the LCD
panel.
- Available values are between MIN(0) and MAX(100). Higher value means brighter screen.
●●
Color Space
- Used to select color space and the mode will
be changed as the sequence below.
- Native Color -> Rec-709(sRGB) -> Lut SMPTE-C
-> Lut EBU -> Lut D-Cinema -> Rec-2020
●●
Gamma Curve
- Used to change the Gamma curve between
1.00 and 3.00.
- Use the KNOB(UP/DOWN) button to set the
value with 0.05 increment and decrement.
4K LCD Monitor 15
5. Menu Operations
[3] GPI
Menu
Classification
This item activates/ deactivates the REMOTE function.
●● The user may designate a function for each pin and each pin’s default setting is
as follows.
●●
●●
The default settings are as follows:
PIN 1 : SINGLE-SDI
PIN 2 : 2SI-SDI
PIN 3 : QUAD-SDI
PIN 4 : HDMI
PIN 5 : 1:1 SCAN
PIN 6 : ASPECT
PIN 7 is POWER ON/OFF use only, PIN 8 is GND
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
16 4K LCD Monitor
1
8
PIN
1~6
Settable Values
NONE
SINGLE-SDI
2SI-SDI
QUAD-SDI
HDMI
UNDER SCAN
1:1 SCAN
ASPECT
H/V DELAY
BLUE ONLY
MONO
16:9 MARKER
4:3 MARKER
4:3 ON AIR MARKER
15:9 MARKER
14:9 MARKER
13:9 MARKER
1.85:1 MARKER
2.35:1 MARKER
1.85:1&4:3 MARKER
CENTER MARKER
SAFETY AREA 80%
SAFETY AREA 85%
SAFETY AREA 88%
SAFETY AREA 90%
5. Menu Operations
[3] GPI
●●
Port NO
- Used to set the port number of the monitor.
●●
Network Setting Apply
- Use to apply changed value of IP Address,
Subnet mask, Gateway and Port no.
●●
Monitor ID
- This item sets the ID of each monitor for the
TVLogic control protocol using RS-422/485
communication.
- Available values are 0~127.
●●
DHCP
- Used to activate/deactivate the DHCP function.
●●
IP Address
- Used to set the IP Address connected to a Monitor.
●●
Subnet Mask
- Used to set the Subnet Mask connected to a
Monitor.
●●
Gateway
- Used to set the Gateway number connected
to a Monitor.
4K LCD Monitor 17
5. Menu Operations
[4] MARKER
●●
Fit Marker
- The item activates the FIT MARKER function.
- With FIT MARKER On the safety area is displayed relative to the marker in use. With FIT MARKER Off the safety area is displayed relative to the incoming source.
- FIT MARKER acts as below:
●●
Marker
- Used to select the marker type when the MARKER is displayed on the screen.
- MARKER may only be activated by pressing
the MARKER button on the bottom front of
the monitor.
- Available marker types are Off, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3, 4:3 ALT 14:9, 16:9 ALT 14:9, 16:9 ALT 4:3
and USER.
●●
●●
Safety Area
- Used to select and control the size and availability of the SAFETY AREA.
- Available types are 80%, 85%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9,
EBU Action 14:9, EBU Graphic 14:9, EBU Action
4:3 and EBU GRAPHIC 4:3.
- This function operates only after activating
the MARKER function and by pressing the
MARKER button on the bottom front of the
monitor.
18 4K LCD Monitor
●● MARKER
: 4:3
●● SAFETY AREA : 90%
●● FIT MARKER : ON
Marker Mat
- The item darkens the area of the outside of
MARKER.
- The degrees of darkness are between Off ~ 7.
- Larger value means darker the marker mat is.
●●
Marer Color
- The item controls the color of the MARKER
lines.
- Available colors are white, gray, black, red,
green and blue.
Center Marker
- Used to select the availability of the CENTER
MARKER on the screen.
- This function operates only after activating
the MARKER function by pressing the MARKER button on the bottom front of the
monitor.
●●
●● MARKER
: 4:3
●● SAFETY AREA : 90%
●● FIT MARKER : OFF
●●
Thickness
- The item controls the thickness of the MARKER lines.
- The degrees of thickness are between 1 ~ 7.
5. Menu Operations
[4] MARKER
●●
USER Marker H1
- The item controls the position of the first user defined horizontal marker line.
- Marker option USER needs to be selected.
●●
USER Marker H2
- The item controls the position of the second
user defined horizontal marker line.
- Marker option USER needs to be selected.
●●
USER Marker V1
- The item controls the position of the first user defined vertical marker line.
- Marker option USER needs to be selected.
●●
USER Marker V2
- The item controls the position of the second
user defined vertical marker line.
- Marker option USER needs to be selected.
4K LCD Monitor 19
5. Menu Operations
[5] LUMA(Y") & FOCUS
●●
Focus Assist Level
- Used to set the edge difference value between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail detection.
- Designated color is displayed when the difference of the edges exceeds the previously set value.
- This feature is available only when the Focus
Assist mode is activated.
●●
Luma Zone Check
- Used to activate/deactivate the Luma Zone
function.
- Adjustable modes are Off, (Color Patt) On and
(Zebra Patt) On.
●●
Luma Zone Adjust
- Used to select the Luma Zone area.
- Adjustable range is from 1 to 100%.
●●
Focus Assist
- Used to activate/deactivate the Focus Assist
function.
- Adjustable modes are Mono, Color and Off.
●●
Focus Assist Color
- Used to select a color for Focus Assist among
red, green, blue and white.
- This feature is available only when the Focus
Assist mode is activated.
20 4K LCD Monitor
5. Menu Operations
[6] AUDIO
●●
Level Meter Size
- Used to control the size of the Audio Level
Meters.
- Available modes are Small, Small Translucent,
Normal, Normal Translucent, Large and Large
Translucent.
- In Small, Normal and Large Modes, the level
meter appears semitransparent.
●●
●●
●●
- Used to control the output volume of the
[AUDIO OUT] terminal on the back of the monitor.
- Control range is from 0 to 30.
Level Meter Select
- Used to set the Embedded Audio Mode.
- Available modes are Off, G1+G2, G2+G3, G3+G4, G1+G3, G1+G4, G2+G4 and 16CH.
●●
Level Meter Display
Level Meter Reference
- Display the default Audio Level Meter value.
- Available options are -18dB and -20dB.
- Audio Level Meter within selected value turns
to green and exceeded audio level is displayed in yellow. Audio level exceeding 4dB is displayed in red.
●●
Em. Audio Left
- Used to set embedded audio channel for left
audio out of the [AUDIO OUT] terminal on the
back of the monitor.
- Available values are between CH1~CH16 and
OFF.
- Used to set the display method for Audio Level Meter.
- Available modes are Group and Pair.
●●
Volume
●●
Em. Audio Right
- Used to set embedded audio channel for right audio out of the [AUDIO OUT] terminal
on the back of the monitor.
- Available values are between CH1~CH16 and
OFF.
Peak Decay Time
- Sets the reduction time for the max value indication of audio signals.
- Control range is from 0 to 30. Bigger number
means a longer display time for max. value.
4K LCD Monitor 21
5. Menu Operations
[7] DISPLAY & SET
●●
S/W Upgrade Start
- Select the S/W Upgrade Start menu to start
the firmware upgrade.
- Do not turn off the monitor while the upgrade
is conducting.
●●
Time Code
- Used to set the Time Code.
- Available modes are OFF, VITC and LTC.
●●
●●
●●
Internal Pattern
- Generates White Pattern internally.
- Selectable range is from 0% to 100% with 5%
increment.
●●
System Default
- Used to initialize OSD values to factory default.
●●
- Used to lock all buttons except Power, Input
select and Menu buttons.
User config set
- The item saves 3 user configurations.
- Available mode is USER1, USER2, USER3.
- Effective item is MARKER, CENTER MARKER,
SAFETY AREA, MARKER MAT,
MARKER COLOR in MARKER 1/2 and BRIGHT,
CONTRAST CHROMA, PHASE APERTURE in
PICTURE 1/3.
S/W Upgrade
- Used to upgrade the firmware using the USB
memory (Thumb drive).
- Select the S/W Upgrade Start menu to start
the USB memory search.
- When the USB memory is detected, the S/W
Upgrade Start menu becomes activated.
22 4K LCD Monitor
Key Lock
●●
Key LED
- Used to control the Key Lamp on the front
of the monitor.
- If the button with LED is pressed with the KEY LED Off, LED comes on but turns off after
5 seconds later.
5. Menu Operations
[7] DISPLAY & SET
●●
Board Version
- Displays the current Program Version of the
monitor.
0001 0001 0.01 9
KEYPAD VERSION
MCU VERSION
FPGA VERSION
CPU VERSION
●●
F1 Key Mapping
- User can select the function for the F1 button.
●●
F2 Key Mapping
- User can select the function for the F2 button.
●●
F3 Key Mapping
- User can select the function for the F3 button.
●●
F4 Key Mapping
- User can select the function for the F4 button.
- Selectable functions: Blue Only, H/V Delay,
Color Temp, Audio Level Meter, Time Code and Luma Zone.
●●
Serial Number
- Used to display serial number of the monitor.
4K LCD Monitor 23
5. Menu Operations
[8] INFORM.
●●
Bit Depth
- Displays the Bit Depth information of the Payload ID Byte 4.
●●
Link Assignment
- Displays the Channel Assignment information
of the Payload ID Byte 4.
●●
Input Channel
- Indicates the channel of the input signal.
- In the 2SI, QUAD MODE, use the KNOB button
to change the input signal and the information of the signal will be displayed.
- In the SINGLE MODE, the signal information of
the channel will be displayed.
●●
Input Config
- Displays the current input signal.
●●
SDI Payload ID
- Displays the values of the Byte 1,2,3,4.
●●
Video Standard
- Displays the standard of the Payload ID Byte 1.
●●
Sampling
- Displays the Sampling Structure information
of the Payload ID Byte 3.
●●
Picture Rate
- Displays the Picture Rate of the Payload ID
Byte 2.
●●
Scanning Method
- Displays the Interlace/Progressive of the Payload ID Byte 2.
24 4K LCD Monitor
6. Video Support Resolution
VIDEO SUPPORT RESOLUTION
Input Signal Interfaces
Signal Format (HD-SDI / 3G SDI)
HD-SDI
Quad link (4K)
3840x2160 (23.98/24/25/29.97/30p/Psf)
Input Signal Interfaces
Signal Format (HD-SDI / 3G SDI)
YCbCr 4:2:2 10bit
4096x2160 (23.98/24/25/29.97/30p/Psf)
3840x2160(50/59.94/60p)
YCbCr 4:2:2 10bit
3840x2160 (23.98/24/25/29.97/30/p/Psf)
YCbCr 4:4:4 10/12bit
RGB 4:4:4 10/12bit
4096x2160 (47.95/48/50/59.94/60p)
YCbCr 4:2:2 10bit
4096x2160 (23.98/24/25/29.97/30p/Psf)
YCbCr 4:4:4 10/12bit
RGB 4:4:4 10/12bit
3840x2160 (23.98/24/25/29.97/30/p)
YCbCr 4:2:2 10bit
4096x2160 (23.98/24/25/29.97/30p)
YCbCr 4:2:2 10bit
3840x2160(50/59.94/60p)
YCbCr 4:2:2 10bit
3840x2160 (23.98/24/25/29.97/30/p)
YCbCr 4:4:4 10/12bit
RGB 4:4:4 10/12bit
4096x2160 (23.98/24/25/29.97/30p)
YCbCr 4:4:4 10/12bit
RGB 4:4:4 10/12bit
4096x2160 (47.95/48/50/59.94/60p)
YCbCr 4:2:2 10bit
6G-SDI
Single link (4K)
3840x2160(23.98/24/25/29.97/30/p)
YCbCr 4:2:2 10bit
4096x2160(23.98/24/25/29.97/30p)
YCbCr 4:2:2 10bit
12G-SDI
Single link(4K)
3840x2160(50/59.94/60p)
YCbCr 4:2:2 10bit
4096x2160(47.95/48/50/59.94/60p)
YCbCr 4:2:2 10bit
3G-SDI
Quad link(4K)
3G-SDI
2-Sample Interleave
Dual link(4K)
3G-SDI
2-Sample Interleave
Quad link(4K)
4K LCD Monitor 25
6. Video Support Resolution
VIDEO SUPPORT RESOLUTION
Input Signal Interfaces Signal Format (HDMI)
HDMI
Single link(4K)
26 4K LCD Monitor
720x480(60i)
720x576(50i)
RGB 4:4:4 8/10/12bit
YCbCr 4:4:4 8/10/12bit
720x480(60p)
720x576(50p)
1280x720(60p)
1920x1080(50/59.94/60i)
1920x1080(50/59.94/60p)
RGB 4:4:4 8/10/12bit
YCbCr 4:4:4 8/10/12bit
YCbCr 4:2:2 12bit
800x600@60Hz
1024x768@60Hz
1280x1024@60Hz
1600x1200@60Hz
VESA
3840x2160 (23.98/24/25/29.97/30)
4096x2160 (23.98/24/25/29.97/30)
RGB 4:4:4 8bit
YCbCr 4:4:4 8bit
RGB 4:4:4 10/12bit *
YCbCr 4:4:4 10/12bit *
* To be supported
3840x2160 (50/60p)
4096x2160 (50/60p)
RGB 4:4:4 8bit
YCbCr 4:4:4 8bit
7. Product Specifications
LUM-240G
LCD
Input Connector
Output
Input Signal
Size
23.8”
Resolution
3840 X 2160 (16:9)
Pixel Pitch
0.13725(H) X 0.13725(V) mm
Color Depth
1.07B Colors (A-FTC 10bit)
Viewing Angle
H : 178 degrees / V : 178 degrees
Luminance of white
350 cd/ m2 (Center)
Contrast Ratio
1000 : 1
Display Area
527.04(H) X 296.46(V) mm
1 X HDMI
HDMI Input
4 X BNC
12G-SDI A/B, 3G-SDI C/D Channel Input
4 X BNC
12G-SDI A/B, 3G-SDI C/D Channel (Active Through Out)
12G-SDI
12Gb/s
6G-SDI
6Gb/s
3G-SDI
2.970Gb/s
HD-SDI
1.485Gbps
HDMI
480p/720p/1080p/2160P
SMPTE-425M-A/B
1080p(60/59.94/50/30/29.97/25/24/23.98/30sF/29.97sF/25sF/24sF/23.98sF)
1080i(60/59.94/50)
SMPTE-274M
SDI Input Signal
Formats
1080i (60/59.94/50)
1080p (30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE-296M
720p (60/59.94/50)
SMPTE-260M
1035i (60/59.94)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
SMPTE ST 2036-1:2009 3840×2160(23.98/24/25/29.97/30/50/59.94/60p)
SMPTE ST 2048-2:2011 2048x1080(23,98/24/25/29.97/30p/psf, 47.95/48/50/59.94/60p)
SMPTE ST 2081
3840x2160 (30/25/24p)
SMPTE ST 2082
3840x2160 (60/50/30/25/24p)
Audio In
Embedded Audio / Analog Stereo (Phone Jack)
Audio Out
Internal Speaker (Stereo) / Analog Stereo (Phone Jack)
Power
DC 12/24V / AC100~240V(50~60Hz)
Power Consumption (Approx.)
115 Watts(Max)
Operating Temperature
0℃ to 35℃ (32℉ to 95℉)
Storage Temperature
-20℃ to 60℃ (-4℉ to 140℉)
Main Body Dimensions (mm/inch)
552 x 360 x 98.5 (21.73 x 14.17 x 3.88)
Main Body Dimensions with stand (mm/inch)
586 x 388 x 150 (23.07 x 15.27 x 5.91)
Box Dimensions (mm/inch)
555 X 450 X 280 (21.85 X 17.72 X 11.02)
Weight
10.3kg / 22.71lbs
Basic Accessories
AC Power Cord, Stand
Optional Accessories
Rack Mountable Kit, Acrylic Filter, Carrying Case, V-mount, G-mount
* The specification above may be changed without notice.
4K LCD Monitor 27
MEMO
28 4K LCD Monitor
MEMO
4K LCD Monitor 29
FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv
부사장
12F, ACE HIGH-END 8, 84 Gasan digital 1-ro, Geumcheon-gu, Seoul, 18590, KOREA
TEL : +82-70-8668-6611, FAX : 82-2-6123-3201,
E-mail : sales@
t vlogic.co.kr
153-802 서울특별시
금천구 가산동
345-4
조 성 일
Mobile. 010-2520-6837
에이스하이엔드 8차 12층
">