Specifications subject to change
without notice
Composition:
100% Silicone Rubber
PVC Cable
100% Latex free
System requirements:
USB interface
PS/2 interface
(USB to PS/2 Adapter Not Included)
Number of keys:
86 US Layout keys. This keyboard
does not have a keypad.
Warranty period:
Limited lifetime warranty
You can email us at: [email protected]
or call us at: (301) 341-4900
In Europe, contact +31-23-5450185
www.man-machine.com
USB: Attach the keyboard cable to a USB computer port. (You do not have to
turn off your computer. There is no software to install.)
PS2: Turn off your computer before attaching devices. If you have another
keyboard attached, disconnect it. Attach the PS2 keyboard Adapter (sold
separately) to USB cable connector. Attach cable to the keyboard port.
Turn on your computer to activate the keyboard. (There is no software to
install.)
Installing Your Slim Cool Keyboard
Weight:
600 g (1.3 lb.)
Dimensions:
295.0 mm x 140.0 mm x 15.0 mm
11.6” x 5.5” x 0.6”
Cable length:
1.83 m (6’)
Storage temperature:
-20 °C - 70 °C
-4 ° F - 158 °F
Operating temperature:
0 °C - 70 °C
32 °F – 158 ° F
Voltage:
5 Volt
Current input:
26 mA
The Slim Cool is a 12-inch wide waterproof and contaminant proof
keyboard with tactile feedback keys. The sealed and rigid surface is
ideal for industrial, marine, and medical use, as well as other
applications where moisture, cleaning, and durability are a
consideration. Because the Slim Cool is also quieter than "standard"
keyboards, they are great for applications where noise generated from
“key-clicks” is a problem. The Slim Cool is compatible with standard
keyboard layouts and drivers are not needed.
SSlliim
m CCooooll KKeeyybbooaarrdd
Chlorine based (max 10% solution) – Chlorox, Novalsan, etc.
Formaldehyde based - Formaldehyde Solution 37%, Vinco
Formaldegen, etc.
Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc.
Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc.
Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc.
Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc.
Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc.
Soap and water
Copyright Man & Machine, Inc. 2007
THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO
ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN &
MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY
RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY
QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO
CLEANING.
Buffing pads or scrubbing pads
Temperature or pressure sterilization
•
•
Over 10% bleach solutions
Acetone
•
•
Petroleum based cleaning fluids, such as Gasoline
•
DO NOT USE:
•
•
•
•
•
•
•
•
Disinfectants recommended by Man & Machine, Inc.:
1. Clean the surface of the product by wiping, brushing, spraying or
dipping it. Use only rags, sponges or soft bristle brushes.
DO NOT place the USB or PS/2 connector into the fluid.
2. Either wipe with dry cloth or allow to air dry.
Cleaning Instructions for Waterproof Keyboards and Mice:
">
