Galan W60B1A401J dishwasher User manual

Galan W60B1A401J dishwasher User manual
Add to My manuals

The Galan W60B1A401J is a dishwasher that features a variety of wash cycles to meet your needs. It has an Eco program for standard daily cycles, an Intensive program for heavily soiled loads, and a Light program for delicate items. The dishwasher also has a 60 min Rapid program for lightly soiled loads.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Galan W60B1A401J Dishwasher User Manual | Manualzz

50 7-4 09 -0 DW

DISHWASHER USER MANUAL

W60B1A401J

140825

Website:www.galanz.com

W60B1A401J-AE0

DW-0097-450

100

Read this Manual

1) Safety Information .............................1-2

Dear Customer,

Please read this User Information carefully and keep it to refer to at a later date.

Pass it on to any subsequent owner of the appliance.

This manual contains sections of Safety

Instructions, Operating Instructions, Installation

Instructions and Troubleshooting Tips, etc.

2) Disposal ................................................2

3) Operation Instruction.........................3-4

Control Panel ..............................................3

Dishwasher Features ..................................4

Carefully read it before using the dishwasher will help you to use and maintain the dishwasher properly.

4) Prior using for the first time .............4-9

Water Softener .........................................4-5

Loading the Salt into the Softener.............5-6

Fill the Rinse Aid Dispenser......................6-7

Function of Detergent ..............................7-9

Before Calling for Service

5) Loading the Dishwasher Baskets..10-13

To review the section on Troubleshooting Tips will help you to solve some common problems by yourself and not need to ask for the help of professional technicians.

6) Starting a washing programme ....14-15

Wash Cycle Table ......................................14

Turning on the Appliance............................14

Change the Programme.............................15

Forget to Add Dish...............................15

NOTE:

The manufacturer, following a policy of constant development and up-dating of the product, may make modifications without giving prior notice.

7) Maintenance and cleaning.............16-18

8) Installation .....................................18-21

Positioning and leveling .......................18-19

Connecting the water and electricity supplies

..............................................................19-21

9) Troubleshooting Tips.....................21-25

Error codes ...............................................21

Before calling for service .....................22-23

Technical information ................................24-25

1. Safety Information

WARNING !

When using your dishwasher, follow the basic precautions including the following:

WARNING! HYDROGEN GAS IS EXPLOSIVE

Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

WARNING! PROPER USE

Do not abuse, sit on, or stand on the door or dish basket of the dishwasher.

Do not touch the heating element during or immediately after use.

Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out.

Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.

When loading items to be washed:

Locate sharp items so that they are not likely to damage the door seal;

Load sharp knives with the handles up to reduce the risk of cut-type injuries;

Warning: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

When using your dishwasher, you should prevent plastic items from contacting with heating element.

Check that the detergent receptacle is empty after completion of the wash cycle.

Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent in your dishwasher.

Other means for disconnection from the supply must be incorporated in the fixed wiring with at least 3mm contact separation in all poles.

Keep children away from detergent and rinse aid, keep children away from the open door of the dishwasher , there could still be some detergent left inside.

Young children should be supervised to ensure that they do not play with the appliance.

This product is not designed for use by persons (including children) who have reduced physical, sensory or mental capacities or persons with no experience or knowledge, unless they are instructed and supervised in the use of the appliance by a person responsible for their safety.

Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed.

Avoid contact with skin and eyes, and keep children away from the dishwasher when the door is open.

The door should not be left in the open position since this could present a tripping hazard.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Please dispose of packing materials properly.

1

During installation, the power supply must not be excessively or dangerously bent or flattened.

Do not tamper with controls.

The appliance is to be connected to the water mains using new hose sets, and the old hose-sets should not be reused.

Make sure that the carpet must not obstruct the openings at the bottom base.

Use the dishwasher only for its intended function.

The dishwasher is intended for indoor use only.

The dishwasher is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY

SAVE THESE INSTRUCTIONS

2 Disposal

Dispose of the dishwasher packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with the standard international abbreviations:

(e.g. PS for polystyrene, padding material)

This appliance is identified according to the European guideline

2002/96/EC on waste electrical and electronic equipment -WEEE. The guideline specifies the framework for an EU-wide valid return and re-use of old appliances.

WARNING!

Packaging material could be dangerous for children!

For disposing of package and the appliance please go to a recycling centre. Cut off the power supply cable and make the door closing device unusable.

Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local city office and your household waste disposal service

IMPORTANT!

To get the best performance from your dishwasher, read all operating instructions before using it for the first time.

2

3

Dishwasher Features

6

3

4

5

1

2

9

8

7

Front View

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

8 Cutlery basket

9 Fork shelf

4 Prior Using for the First Time

Before using your dishwasher for the first time:

A. Set the water softener

B. Pour 500ml of water inside the salt container and then fill with dishwasher salt

C. Fill the rinse aid dispenser

D. Function of detergent

A. Water Softener

The water softener must be set manually, using the water hardness dial.

The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder the water is. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Setting

The amount of salt dispensed can be set from H0 to H7.

Salt is not required at the set value H0.

1. Find out about the hardness value of your tap water. Your water utility company will help you

with this.

2. Set value can be found in the water hardness table.

3. Close the door.

4. Switch on "Power" switch.

5. Hold down " Delay" button and then press "Program" button for 5 seconds.The buzzer rings one time and H..

flashes on the digital display.(factory setting is H4)

4

To change the setting:

1. Press " Delay " button.

Each time the button is pressed, the set value

increasesby one level;when the value of H7 has

been reached, the display jumps back to H0(off).

2. Press " Program " button. The chosen setting

has now been stored.

Contact your local water board for information on the hardness of your water supply.

Water hardness table

Water hardness

Mmol/l

Clark

Range

0-8

9-10

11-12 soft soft medium

13-15

16-20

21-26

27-38

39-62 medium medium hard hard hard

0-1.1

1.2-1.4

1.5-1.8

1.9-2.1

2.2-2.9

3.0-3.7

3.8-5.4

5.5-8.9

Set value on the machine

H3

H2

H1

H0

H4

B. Loading the Salt into the Softener

Always use salt intended for using with dishwasher.

NOTE: If your model has no water softener, you may skip this section

WATER SOFTENER

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses salts specifically designed to eliminate lime and minerals from the water.

The salt container is located beneath the lower basket and should be filled as follows:

Attention!

Only use salt specifically designed for use in dishwashers! All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any caused damages.

Only fill with salt just before starting one of the complete washing programmes.

This will prevent any grains of salt or salty water, which may have been split, remaining on the bottom of the machine for any period of time, which may cause corrosion.

After the first wash cycle the control panel light expires.

1 2

A. Remove the lower basket and then unscrew and remove the cap from the salt container.

1

B. If you are filling the container for the first time, fill 2/3 of its volume with water (around 500ml).

2

5

C. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is

normal for a small amount of water to come out of the salt container.

D. Carefully screw the cap back on.

E. Usually, the salt warning light will be off in 2-6 days after the salt container is filled with salt.

NOTE:

1. The salt container must be refilled when the salt warning light in the control panel comes on. Though the salt container is filled enough, the indicator light may not black out before the salt fully dissolve. If there is no salt warning light in the control panel (for some models), you can judge when to load the salt into the softener by the cycles that the dishwasher had run (see the following schema).

2. If there are spills of the salt, a soak program could be run to wipe them out.

C. Fill the Rinse Aid Dispenser

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.

Attention!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to Refill the Rinse Aid Dispenser

If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-aid by the color of the optical level indicator "D" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark .As the rinse aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1 / 4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.

Full

3 / 4 full

1 / 2 full

1 / 4 full - Should refill to eliminate spotting

Empty

D (Rinse-Aid indicator)

6

5

4 3

2

1

MAX

RINSE AID DISPENSER

6

1

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

arrow.

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing water to sheet off the dishes.

Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.

To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 140ml.

Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills with a damp cloth. Don't forget to replace the cap before you close dishwasher door.

Attention!

Clean up any rinse aid split during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has four or six settings. Always start with the dispenser set on "4" If spots and poor drying are problems, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "5". If the dishes still are not drying properly or are spotted, adjust the dial to the next higher number until your dishes are spot-free. The dose is factory set in position 5.

6

5

4

MAX

3

2

1

Adjust lever

(Rinse)

NOTE: Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

D. Function of Detergent

Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of commercial

quality detergents are suitable for this purpose.

Concentrated Detergent

Based on their chemical composition, dishwasher can be split in two basic types: conventional, alkaline detergents with caustic components low alkaline concentrated detergents with natural enzymes

The use of "Eco" washing programme in conjunction with concentrated detergents reduces pollution and is good for your dishes; these washing programmes are specially matched to the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason"Eco" washing programme in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using"intensive" programme.

Detergent Tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some detergent

7

cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Detergent Dispenser

The dispenser must be refilled before the start of each washing cycle following the instructions provided in the Wash Cycle Table. Your dishwashers use less detergent and rinse aid than conventional dishwashers. Generally, only one tablespoon of detergent is needed fora normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just before starting dishwasher, otherwise it could get damp and will not dissolve properly.

Amount of Detergent to Use

NOTE:

for dishwasher.

WARNING!

Dishwasher detergent is corrosive! Take care to keep it out of reach of children

Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry.

Don't put powder detergent into the dispenser until you're ready to wash dishes.

1

2

Fill in the detergent

Fill the detergent dispenser with detergent.

The marking indicates the dosing levels , as illustrated on the right:

6

5

4 3

2

1

MAX

approximately 5g of detergent.

Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging.

Close the lid and press until it locks in place.

If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent

Chamber. This detergent will take effect during the pre-wash phase.

8

NOTE:

You find information about the amount of detergent for the single programme on the last page.

Please be aware that according to the level soiling and the specific hardness of water, differences are possible.Please observe the manufacturer's recommendations on the detergent packaging.

Detergents

There are 3 sorts of detergents

1.With phosphate and with chlorine

2.With phosphate and without chlorine

3.Without phosphate and without chloride

Normally new pulverized detergent is without phosphate. The water softener function of phosphate is not given. In this case we recommend to fill salt in the salt container even when the hardness of water is only 6 dH. If detergents without phosphate were used in case of hard water often white spots appear at dishes and glasses. In this case please add more detergent to reach better results.

Detergents without chlorine do only bleach a little. Strong and coloured spots will not removed completely. In this case please choose a programme with higher temperature.

Use of "3 in 1" Detergent Tablets

General Advice

1. Before using these products you should first check that the water hard-ness in your supply is compatible with the use of these products as per the detergent manufacturers instructions (on the product packaging).

2. These products should be strictly used according to the detergent manufacturers instructions.

3. If you encounter problems when using "3 in 1" products for the first time then please contact the

detergent manufacturers care line (the telephone number is given on the product packaging).

These products are detergents with integrated and combined detergent/rinse aid and salt functions.

Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging).

Special Advice

When using combination products, the rinse-aid and salt lights are no longer useful. It may be helpful to select the lowest possible setting for water hardness.

To select "3in1" function:

1. Press the power switch and select the 3in1 washing cycle by pressing the option button " 3in1" until the "3in1" indicator blinks.

2. The 3in1 washing cycle will be available after pressing the start/pause button , and the"3in1"

indicator lights.

To cancel "3in1" function:

Follow the 'Cancelling a programme in progress' instructions.If you decide to switch to the use of a standard detergent system we advise that you:1. Refill both the salt and rinse aid compartments.

2. Switch the water hardness setting to the highest possible position and run for three normal cycles without load.

3. Readjust the water hardness setting again according to the conditions for your region (For more information please refer to your instruction manual).

Note:3in1washing cycle is additional function, they must be used with other programme (Intensive,

Eco and Light).

9

5 Loading the Dishwasher Baskets

For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and silverware baskets may vary from your model.

Attention before or after Loading the Dishwasher Baskets

Scrape off any large amounts of leftover food. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in the following way:

1.Items such as cups, glasses, pots/pans, etc. are stood upside down.

2.Curve items, or those with recesses, should be at a slant so that water can run off.

3.They are stacked securely and can not tip over.

4.They do not prevent the spray arms from rotating while washing takes place.

Very small items should not be washed in the dishwasher as they could easily fall out of the baskets.

Removing the Dishes

To prevent water dripping from the upper basket into the lower basket, we recommend that you empty the lower basket first and then the upper basket.

Upper Basket

Loading the Upper Basket

The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and

IN

saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water.

C

D

A

B

E

Type

Upper basket

Item

Cup

Glass

Saucer

Serving bowl

Serving bowl

A

6

A

12

B

6

C

12

B

12

A

1

A

7

B

1

C

1

B

7

Adjusting the Upper Basket

If required, the height of the upper basket can be adjusted in order to create more space for large utensils either in the upper basket or lower basket. The upper basket can be adjusted for height by putting wheels of different height into the rails. Long items, serving cutlery, salad servers or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf can be folded back or removed when not be required for use.

10

2

1

4

Loading the Lower Basket

We recommend that you place large items which are most difficult to clean in to the lower basket: pots, pans, lids, serving dishes and bowls, as shown in the figure below.

It is preferable to place serving dishes and lids on the side of the baskets in order to avoid blocking the rotation of the top spray arm.

Pots, serving bowls, etc. must always be placed top down.

Deep pots should be slanted to allow water to flow out.

The bottom basket features fold down tine rows so that larger or more pots and pans can be loaded.

Lower Basket

H

I

J

Type

Lower basket

Item

Serving bowl

F

G Soup plate

Dinner plate

Dessert plate

Oval plate

Lower basket

Folding racks

Folding racks consisting of two parts that are located on the lower basket of your machine are designed in order to let you place big items easier as pots, pans, etc.

If requested, each part can be folded separately, or all of them can be folded and larger can be obtained. You can use folding racks by rasing then upwards, or by folding.

For optional

1 2

11

Cutlery Basket and Fork shelf

Cutlery should be placed in the cutlery basket with handles at the bottom: If the basket has side baskets, the spoon should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket.

Fork shelf

Cutlery basket

Door side

Door side

Cutlery basket

Type

4

5

1

2

3

Item

Tea spoons

Dessert spoons

Soup spoons

Gravy ladle

Serving fork

6

7

Forks

Knives

8

Serving spoons

For washing in the dishwasher the following cutlery/dishes

Are not suitable

Cutlery with wooden, horn china or mother-of-pearl handles

Plastic items that are not heat resistant

Older cutlery with glued parts that is not temperature resistant

Bonded cutlery items or dishes

Pewter or cooper items

Lead crystal glass

Steel items subject to rusting

Wooden platters

Items made from synthetic fibre

WARNING!

Do not let any item extend through bottom

Are of limited suitability

Some types of glasses can become dull after a large number of washes

Silver and aluminium parts have a tendency to discolour during washing

Glazed patterns may fade if machine washed frequently

12

NOTE:

Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint. If you buy new dishes please make sure that they are suitable for dishwashers.

NOTE:

Please do not overload your dishwasher. There is only space for 12 standard dishes. Do not use dish that is not suitable for dishwashers. This is important for good results and for reasonable energy consumption.

Loading Cutlery and Dishes

Before loading the dishes, you should:

Remove large left-over

Soften remnants of burnt food in pans

When Loading the Dishes and Cutlery, Please Note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans etc. with the opening downwards so that water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other

To avoid damage to glasses, they must not touch

Load large items which are most difficult to clean into the lower basket

The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and

tea cups

Attention!

Long bladed knives stored in an upright position are a potential hazard!

Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket

Damage to Glassware and other Dishes

Possible causes:

Type of glass or manufacturing process. Chemical composition of detergent.

Water temperature and duration of dishwasher programme.

Suggested remedy:

Use glassware or porcelain dishes that have been marked dishwasher-proof by the manufacturer.

Use a mild detergent that is described as kind of dishes. If necessary, seek further information from

detergent manufacturers.

Select a programme with a low temperature.

To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the

programme has ended.

At the End of the Wash

When the working cycle has finished, the buzzer of dishwasher will ring for 6 times, then stop. Turn off the appliance using the "Power" button, shut off the water supply and open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.

13

6. Starting a Washing Programme

Wash cycle table

Program

Cycle Selection

Information

Description of Cycle

Detergent

Pre/main

Intensive

For the heaviest soiled loads, such as pots, pans, casserole dishes and dishes that have been sitting with dried food on them for a while.

Pre-wash

Main wash(60 )

Rinse 1

Rinse2

Hot rinse

Drying

5/25

( or 3 in 1 )

Running

Time

(min)

180

Eco

N

(Standard

Programme)

For normally soiled loads, such as pots, plates, glasses and lightly soiled pans.

standard daily cycle.

Pre-wash

Main wash

(46 )

Hot rinse

Drying

5/25

( or 3 in 1 )

Light

60 min

Light wash cycle to be used for more delicate items which are sensitive to high temperatures.(Run cycle immediately after use)

Pre-wash

Main wash(45 )

Hot rinse

Drying

For lightly and normally soiled plates and pans for every day.

Hot rinse 1

Hot rinse 2

Hot rinse(60 )

Drying

5/20

( or 3 in 1 )

5/20

Rapid

A shorter wash for lightly soiled loads that do not need drying.

Pre-Rinse

To rinse dishes that you plan to wash later that day

Main wash(40 )

Hot rinse

Pre-wash

15

/

172

137

60

39

EN 50242: this program is the test cycle

The information for comparability test in accordance with EN50242,as follows:

- Capacity: 12 settings

- Position of upper basket: Low position

- Rinse aid setting: 5 ( or 4 for four setting dispenser)

11

Energy

(kWh)

Water

(L)

1.30

0.92

0.85

0.95

0.50

0.01

16

11

14

10

7

4

Turning on the Appliance

Starting a wash cycle...

Draw out the lower and upper basket, load the dishes and

1. push them back. It is recommended to load the lower basket first, then the upper one (see the section entitled "Loading the Dishwasher"). Pour in the detergent (see the section entitled "Salt,

Detergent and Rinse Aid").

2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specification of the socket is 12 A 250 VAC.50 Hz.

Make sure that the water supply is turned on to full pressure. Close the door, press the" Power"

button, Press the " Power" button to select a desired "Wash cycle". (See the section entitled "Wash

Cycle Table") . With a little force to ensure the door is properly closed.

14

NOTE:

A click could be heard when the door is closed perfectly.

When the washing is over, you can shut off the switch by pressing"Power" button.

Change the Programme.

Premise: A cycle that is underway can only be modified if it has only been running for a short time.

Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section entitled " Fill in the Detergent " ).

Press”Power” button to cancel the programme, and turn on it again ,then you can change the

programme to the desired cycle setting (see the section entitled "Starting a wash cycle. . . " ).

NOTE: If you open the door when washing, the machine pauses and warning alarm rings, the display appears E1. When you close the door, the machine will keep on working .

The 6 programme lights show the state of the dishwasher: a) One of the programme lights on--> cycle running b) One of the programme lights blinking -->pause

NOTE:

If all the lights begin to glimmer, that indicates the machine is out of order, please turn off the main power and water supply before calling a service.

Forget to Add Dish

A forgotten dish can be added any time before the detergent cup opens.

1 Open the door a little to stop the washing.

2 After the spray arms stop working, you can open the door completely.

3 Add forgotten dishes.

4 Close the door, the dishwasher will work after ten seconds.

WARNING!

It is dangerous to open the door when washing, because the hot water may scald you.

Switch Off the Dishwasher

The digital display appears "---" and the buzzer rings 6 times, only in this case the programme has ended.

1.Switch off the dishwasher by pressing the"Power" button.

2.Turn off the water tap!

Open the door carefully. Hot steam may escape when the door is opened!

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around

15 minutes before removing from the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper basket onto the dishes in the lower one.

15

7. Maintenance and cleaning

Filtering System

2

1

3

The filter is used to avoid the big remnants and other sundries getting inside the pump. The residue can obstruct the filter in sometime.

The filter system consists of a coarse filter, a flat

(Main filter) and a micro filter (fine filter).

1 Flat filter

Food and debris will be trapped by a special jet on the lower spray arm.

2 Coarse filter

Big debris, such as bone and glass that could clog the drain will be trapped in the coarse filter.

To remove an item caught in this filter, gently squeeze

the taps on the top of this filter and lift it out.

3 Micro filter

This filter holds soil and food residue in the sump area and prevents it from being redeposit on the dishes during a cycle.

- Inspect the filters for obstructions every time the dishwasher has been used.

- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water.

Step 1 contrarotate the

Coarse filter ,and then lift it up;

Step 2 lift the Flat filter up

1 2

NOTE:

If operate from step 1 to step 2, the filter system will be removed; while operate from step 2

to step 1, the filter system will be installed.

Filter assembly

For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter assembly, pull on the cup handle in the upward direction. The entire filter assembly should be cleaned once a week. To clean the coarse filter and the micro filter, use a cleaning brush. Then, reassemble the filter parts as shown in the figures above and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward. The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and utensils.

16

WARNING!

Never run the dishwasher without the filters in place. When cleaning the filters, don't knock on them.

Otherwise, the filters could be contorted and the performance of dishwasher could be debased.

Cleaning the Spray Arms

It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings.

To remove the spray arms, screw off the nut clockwise to take out the washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing thoroughly.

Caring for the Dishwasher

To clean the control panel, use a lightly dampened cloth then dry thoroughly.

To clean the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Protect Against Freezing

If your dishwasher is left in an unheated place during the winter, ask a service technical to:

1.Cut off electrical power to the dishwasher.

2.Turn off the water supply and disconnect the water inlet pipe from the water valve.

3.Drain water from the inlet pipe and water valve. (Use a pan to catch the water)

4.Reconnect the water inlet pipe to the water valve.

5.Remove the filter in the tub and the bottom and use a sponge to use up water in sump

Cleaning the Door

To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.

Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the finish. Some papers towels can also scratch or leave marks on the surface.

WARNING!

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface.

17

How to Keep Your Dishwasher in Shape

After Every Wash

After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

Remove the Plug

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.

When You Go on holiday

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming in the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.

No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwashers.

Seals

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this.

Attention:

The installation of the pipes and electrical equipments should be done by professionals.

Warning

Electrical Shock Hazard!

Disconnect electrical power before installing dishwasher.

Failure to do so can result in death or electrical shock.

8. Installation

Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and leveling

1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed and further with the installation process.

2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop (see the

Assembly instruction sheet).

18

3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operation.

Connecting the water and electricity supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable

The appliance must be connected to the water supply network using new piping. Do not use old piping.

Connecting the water inlet hose

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place.

If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and the appliance could be damaged.

Connecting the water outlet hose

min 40mm

Fit the drainage hose of your machine to the drainage pipe without bending.

If the length of the hose is not sufficient, apply to the authorized service for an extension made from the same material as the original. Remember that the length of the hose should not exceed 4meters even when with an extension.

If the drainage hose is longer the 4 m. the dishes will not be cleaned properly secure your hose firmly to the drainage pipe to avoid it coming off during the washing process.

Electrical connection

Before inserting the plug into the electrical socket, make sure that: the socket is earthed and complies with current regulations; the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door(see description of the appliance); the power supply voltage falls within the values indicated on the data plate on the inside of the door; the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see assistance); do not use extension cables or multiple sockets.

For optional 19

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical

Assistance Service in order to prevent all potential hazards.(See Assistance)

The company shall not be held responsible for any incidents that occur if these regulations are not observed.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with and add approximately 2 Kg of salt (see Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. It is also normal that the LOW

SALT indicator light continues to flash for a few cycles after the salt has been loaded.

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Leveling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2 .

NOTE:

The maximum adjustment height of the feet is 20 mm.

How to Drain Excess Water From Hoses

If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or a suitable container that is held outside and lower than the sink.

Water Outlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.

Ensure that the water inlet hose is not kinked or squashed.

Extension Hose

If you need a drain hose extension, observe to use a similar drain hose..

It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

Syphon Connection

The waste connection must be at a height of between 50cm (minimum) and 100cm (maximum) from the bottom of the dish. The water drain hose should be fixed by a hose clip.

20

Start of Dishwasher

The followings should be checked before starting the dishwasher:

1 Whether the dishwasher is level and fixed

2 Whether the inlet valve is opened

3 Whether there is leakage at the connections of the conducts

4 Whether the wires are tightly connected

5 Whether the power is switched on

6 Whether the inlet and drain hoses are knotted

7 All packing materials and printings should be taken out from the dishwasher

Attention

After installation, please put this manual into the bags of printings.

The content of this manual is very helpful to the users.

9. Troubleshooting Tips

Error codes

When some malfunctions happen, the appliance will display error codes to warn you.

Codes

E1

E2

E3

E4

E5

E6

E7

Meanings

Door open

Water inlet

Water drainage

Temperature sensor

Overflow/leakage

Water leakage

Heating element

Possible Causes

The door is opened when the dishwasher is operating

Water inlet malfunction

Water drainage malfunction

Temperature sensor malfunction

Overflow occurs/Water leakage occurs

Water leakage occurs

Abnormal heating

WARNING!

If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.

21

Before Calling for Service

Reviewing the charts on the following pages may make you be free of calling for service.

Problem

Possible Causes

What To Do

Fuse blown, or the circuit breaker acted

Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher.

Dishwasher doesn't run

Power supply is not turned on

Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket.

Drain pump doesn't stop

Noise

Suds in the tub

Water pressure is low

Overflow

Check that the water supply is connected properly and the water is turned on.

The system is designed to detect an overflow. When it does, it shuts off the circulation pump and turns on the drain pump.

Some audible sounds are normal

Utensils are not secure in the baskets or something small has dropped into the basket

Sound from detergent cup opening.

To ensure everything is secured in the dishwasher.

Motor hums

Improper detergent

Dishwasher has not been used regularly. If you do not use it often, remember to set it to fill and pump out every week, which will help keep the seal moist.

Use only the special dishwasher detergent to avoid suds. If this occurs, open the dishwasher and let suds evaporate. Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then start the "pre-rinse" wash cycle to drain out the water... Repeat if necessary.

Spilled rinse agent

Always wipe up rinse agent spills immediately.

Stained tub interior

Detergent with colorant was used

Dishes and flatware not clean

Improper program

Improper basket loading

Make sure that the detergent is the one without colorant.

Select a stronger programme.

Make sure that the action of the detergent dispenser and spray arms are not blocked by large dishware.

1 Extremely hard

water

2 Low inlet

temperature

3 Overloading the

Spots and filming on glasses and flatware

dishwasher

4 Improper loading

5 Old or damp

powder detergent

6 Empty rinse agent

dispenser

7 Incorrect dosage

of detergent

To remove spots from glassware:

1 Take out all metal utensils out of the dishwasher.

2 Do not add detergent.

3 Choose the longest cycle.

4 Start the dishwasher and allow it to run for about

18 to 22 minutes, then it will be in the main wash.

5 Open the door to pour 2 cups of white vinegar

into the bottom of the dishwasher.

6 Close the door and let the dishwasher complete

the cycle. If the vinegar does not work: Repeat

as above, except use 1/4 cup (60 ml)of citric acid

crystals instead of vinegar.

22

Cloudiness on glassware

Combination of soft water and too much detergent

Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean.

Yellow or brown film on inside surfaces

Tea or coffee stains

Using a solution of 1/2 cup of bleach and 3 cups of warm water to remove the stains by hand.

WARNING

You have to wait for 20 minutes after a cycle to let the heating elements cool down before cleaning interior; otherwise, burns will happen.

Iron deposits in water can cause an overall film

You have to call a water softener company for a special filter.

White film on inside surface

Hard water minerals

To clean the interior, use a damp sponge with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds.

The Detergent dispenser lid

Clogged detergent re

cannot be

-sidue is blocking the

closed prop

catch

-erly

Clean the detergent from the catch.

Detergent left in dispenser cups

Dishes block detergent Cups

Re-loading the dishes properly.

Steam

Black or gray marks on dishes

Water standing on the bottom of the tub

Normal phenomenon

There is some steam coming through the vent by the door latch during drying and water draining.

Aluminum utensils have rubbed against dishes

This is normal

Use a mild abrasive cleaner to eliminate those marks.

A small amount of clean water around the outlet on the tub bottom keeps the water seal lubricated.

Dishwasher leaks

Overfill dispenser or rinse aid spills

Dishwasher isn't level

Be careful not to overfill the rinse aid dispenser.

Spilled rinse aid could cause oversudsing and lead to overflowing. Wipe away any spills with a damp cloth.

Make sure the dishwasher is level.

23

Technical Data Sheet

Sheet of household dishwasher according to EU Directive 1059/2010:

Manufacture

Model

Standard place settings

Energy efficiency class

1

Annual energy consumption

2

Energy consumption of the standard cleaning cycle

Power consumption of off-mode

Power consumption of left-on mode

Annual water consumption

3

Drying efficiency class

4

Standard cleaning cycle

5

Program duration of the standard cleaning cycle

Noise level

Mounting

Could be built- in

Height

Width

Depth (with connectors)

Power consumption

Rated voltage / frequency

Water pressure (flow pressure)

Water temperature

W60B1A401J

12

A ++

259kWh

0.92kWh

0.35W

0.9W

3080 liter

A

Eco

172 min

55dB(A) re 1 pW

Freestanding

Yes

84.5cm

60.0cm

60.0cm

1850 W

AC 220-240 V/ 50 Hz

0.4-10bar=0.04-1.0MPa

Max.62 C

NOTE:

1. A+++ (highest efficiency) to D(lowest efficiency).

2. Energy consumption "259" kWh per year, based on 280 standard cleaning cycles using cold

water fill and the consumption of the low power modes. Actual energy consumption will depend

on how the appliance is used.

3. Water consumption "3080" litres per year, based on 280 standard cleaning cycles. Actual water

consumption will depend on how the appliance is used.

4. A (highest efficiency) to G(lowest efficiency).

5. This program is suitable for cleaning soiled normally soiled tableware and that it is the most

efficient program in terms of its combined energy and water consumption for that type of

tableware.

24

The device meets the European standards and the directives in the current version at delivery.

-LVD 2006/95/EC

-EMC 2004/108/EC

-EUP 2010/1016

NOTE : The above values have been measured in accordance with standards under specified operating conditions. Results may vary greatly according to quantity and pollution of the dishes , water hardness ,amount of detergent, etc.

The manual is based on the European Union抯 standards and rules.

ZhongShan Galanz Consumer Electric Appliance Co.,Ltd

25

advertisement

Key Features

  • Eco program for standard daily cycles
  • Intensive program for heavily soiled loads
  • Light program for delicate items
  • 60 min Rapid program for lightly soiled loads
  • Water softener
  • Rinse aid dispenser
  • Detergent dispenser
  • Adjustable upper basket
  • Cutlery basket
  • Filters

Frequently Answers and Questions

What is the water softener used for?
The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance.
What kind of detergent should I use?
Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry. Don't put powder detergent into the dispenser until you're ready to wash dishes.
How do I adjust the upper basket?
The upper basket can be adjusted for height by putting wheels of different height into the rails. Long items, serving cutlery, salad servers or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms.
How do I clean the filters?
The filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water.

Related manuals