Mixcder 872 User Manual 2016
mixcder,
User's Manual
MODEL :872
Wireless Headset
Mixcder 872 is a build-in microphone, reliable connection for
high-quality superior sound and foldable Bluetooth headphone. It
uses an adjustable headband, soft-comfortable with ultra-thick
leather ear pads and features a closed-cup design for enhanced
bass reproduction and minimal sound leakage.
1. Package Contents
1. Bluetooth headphone
2. Micro USB charging cable
3. 3.5mm audio cable
4. User manual
2. Features
- Bluetooth 4.0
- Operating range up to 10m
- Touch function (with swipe motion)
- Rechargeable lithium-ion battery
- NFC Function
- Hands free calling function
3. Touch Panel and Button Functions:
—
Touch Panel:
| VOL+ | Volume up
| DD | Next track
| VOL- | Volume down
| 14 | Previous track
Button:
| Dl] | Play/Pause
| db | Power on/off |
Volume control: fr
Touch and move to , volume will increase
* Touch and move to , volume will decrease;
* Volume will increase/decrease incrementally.
Le
Previous and next song: <>
* Touch and move [<<] to [>>] , the next song will be played;
* Touch and move [>>] to [<<] , the previous song will be
played.
4. Connection
4.1 Audio Connection
Connect to the 3.5mm jack connector on your audio device
(ex. mobile phone or PC) using the included audio cable.
The headphone provides you plug-and play feature that lets
you play the music automatically.
EN-2
Note:
When a call comes in with the Bluetooth connection, the
audio connection will stop.
4.2 USB Connection
Connect to a power supply using the included USB charging
cable.
Note:
It will not affect the Bluetooth and audio connections during
charging.
4.3 Bluetooth Connection
The headphone allows you to connect to a device with
Bluetooth feature.
1. Press and hold the power button on the headphone for 4
seconds to enter pairing mode.
2. Connect the headphone to a device with Bluetooth feature
(ex. mobile phone). For more pairing information, refer to “6.
Pairing Configurations”.
3. When the connection is completed, you can talk and play
music through the Bluetooth feature.
Bluetooth Wireless N "a
Connection \ Laptop
Audio connection
© Mobile phone
5. Charging the Battery
1. Connect the headphone to a power supply using the
included USB charging cable.
2. Charge the headphone for 2-3 hours until the solid red
LED goes off.
EN-3
Headset
Micro USB Laptop for
Charging Cable Power Supply
- During the first charge, don't disconnect the headphone
from the power supply even if the LED Indicator on the
headphone indicates that the battery is fully charged. Leave
it to charge at least 2-3 hours in order to ensure fully charged.
- The LED Indicator flashes red and sounds an alert tone (the
battery voltage is under 3.3V) that indicating the headphone
is in the low battery status. When the battery voltage is under
3.1V, the headphone will power off.
6. Pairing the headphone with your mobile phone
1. Press and hold the power button for about 4 seconds to
enter “Pairing Mode”. Then the LED indicator will flash red
and blue alternately.
2. Turn on your device, and then enable the Bluetooth feature.
3. Your Bluetooth device will list the new device that can be
connected.
4. Select “Mixcder 872”. If your device prompts for a code or
PIN, enter “0000”. After the connection is made, the LED
Indicator on your headphone turns solid blue and sounds a
alert tone indicating the Bluetooth wireless connection has
been completed already.
Note:
- When using the mobile phone and headphone for a Bluetooth
connection, the distance between both can not exceed 10 meters.
- You can only communicate with one device via Bluetooth
connection. To switch between Bluetooth devices, disconnect
the headphone from the current device (disable the Bluetooth
feature) before connecting to another.
EN-4
Using the NFC function:
1. Activate the NFC function on your mobile phone.
2. Make sure the headphone is off.
3. Press the power button on the headphone for about 2 seconds
to tum the unit on, The blue LED will start blinking every second.
Then press the Play/pause button about 2 seconds, the blue
LED will flash quickly .You will hear warning tone indicating that
the headphone has enter pairing mode.
4. Or, press the power button on the headphone for about 4
seconds, the blue LED flashes quickly. You will hear a waming
tone, indicating that the headphone has entered pairing mode.
5. Place your mobile phone to the position between Q) and N .
The product name “Mixcder 872” will appear on your mobile
phone, Press “pairing”
6. If the pairing is successful, the blue LED will stay lit.
Note:If your mobile phone device is under version 2.1, please
enter the passkey="0000".
7. Answering a Call
Before answering a call, make sure the headphone is already
paired with the mobile phone. Refer to “6. Pairing Configurations”
to get more pairing information.
1. Press and hold the power button for 2 seconds to power on the
headphone.
2. For a moment, the headphone will enter “Pairing Mode”
directly if it has ever been paired with the Bluetooth device.
3. The LED indicator tums solid blue indicating the pairing is
connected between the headphone and mobile phone.
4. Using the mobile phone to dial a number.
5. When the call is connected, press the power button on the
headphone to talk with the build-in microphone.
6. To end the call, press the power button once. You can also use
the mobile phone to end a call.
J
Bluetooth Connection
Incoming Call
- @
Dial Phone Number
8. Using the Headphone
The table below shows you how to use the button on your
headphone.
Action
Description
Power On
Press and hold the power button for 2 seconds
to power on the headphone. The LED indicator
flashes blue 1 time and sounds a prompt tone
indicating the headphone has been powered
on already.
Power Off
Press and hold the power button for 4 seconds to
power off the headphone. The LED indicator end
to flash and sounds a prompt tone indicating the
headphone has been powered off already.
Pairing Mode
Press and hold the power button for 4 seconds to
enter “Pairing Mode”. The LED indicator will flash
red and blue altemately. It sounds an alert tone to
indicate the pairing mode has been enabled
already. Pairing Name: Mixcder 872
Play Music
Press PI | button once to continue playing music
when the music is paused.
Pause Music
Press || button once to pause the music
playback
Answer a Call
Press the power button or use your mobile phone
to answer a call.
End a Call
Press the power button or use your mobile phone
to end the call.
Reject a Call
Press and hold the power button for 2 seconds.
Transfer a Call
Press and hold the power button for 2 seconds
to switch the call between the mobile phone
and headphone.
Use Last No. (Redial)
Press the power button twice quickly.
Cancel Dialing
Press the power button to cancel dialing.
EN-6
9. LED Indicator
The LED Indicator specifies the status of your headphone. The
table below shows you the various LED indications available.
Color Status Description
Bluetooth
. * Playing/Pause Music
Solid * Adjust Volume
* Adjust Music Track
* Pairing Complete
* After Rejecting/Ending a Call
* After Cancelling a Call
Flashes Standby
Flashes 1 Time | Power On
* On Line Call
Flashes 2 * Call waiting
Times Every * End a Call
1 Sec. * Switch the on line call between
mobile phone and headphone
Red Solid Charging
Flashes Low Battery
Blue and red
Alternate i
Flashes Pairing
10. Take Care of Your Headphone
- Avoid exposing the headphone to rain or other liquids.
- Avoid getting moisture or liquids into any button and other
equipments.
- Always store the headphone upon power off and safely
protected.
- Only use a dry cloth to wipe and clean the headphone.
- You can use a damp cloth to wipe the ear leatherette cushions
carefully.
- Store the headphone at a suitable temperatures between
-25°C~60°C. High temperature may damage the battery life and
reduce the battery performance.
EN-7
11. Troubleshooting
Q: | can’t hear anything in my headphone when using the
mobile phone.
A: - Make sure your headphone and mobile phone have been
paired and are within the allowed range.
- Adjust the speaker volume on the headphone by press the
volume up button.
Q: Why doesn’t my headphone work with the mobile
phone?
A: - Make sure the headphone is charged. The LED indicator is
solid blue when the headphone is pairing completed.
- Make sure you are within available range of the Bluetooth signal.
- It is a long time without pairing and connection with Bluetooth
device, please re-pairing again.
Q: My headphone is not charging?
A: - Make sure to use the USB charging cable.
- Connect the cable directly to a USB port on your PC. Do not use
other charging device to charge your headphone.
- When charging, the LED indicator should solid red. If not, the
USB port may be fail or not providing enough power. Try another
power supply.
Q: Will the headphone support other Bluetooth equipment?
A: The headphone is designed to work with Bluetooth configura-
tion. It can also support other Bluetooth devices just for a
headphone, hands-free or advance audio distribution profile.
Q: Why doesn’t my computer connect the headphone via
Bluetooth ?
A: Make sure your computer has Bluetooth signal or used the
USB Bluetooth Adapter. And the Bluetooth feature is enabled.
Q: Why won’t my headphone pair with the mobile phone?
A: Try and Check the following:
- Make sure the headphone is charged and is in pairing mode. Low
battery may cause the connection fail.
- Make sure Bluetooth feature is active on your mobile phone, and
put it into Bluetooth pairing mode.
- Make sure the name of pairing connection is correctly. You might
also be prompted to enter the pass code “0000” to accept pairing.
EN-8
12. Specifications
Item
Description
Mic. Spec
Microphone Unit
© 6*5 mm
SPL
-56+3dB S.P.L at 1KHz
Impedance
<2.2kQ
Frequency
Response
100Hz-10,000Hz
Directivity
Omni-directional
Operating
Voltage
4.5V
Speaker Spec.
Speaker Diameter
® 40mm
S.PL
90+3dB S.PL at 1KHz
Impedance
320
Frequency
response
20Hz-20KHz
Rated power
20mW
Aggregate
capability
40mW
Bluetooth Spec
Bluetooth Version
4.0
Transmission
Frequency
2.40GHz-2.48GHz
Transmission
Distance
10m
Support Profile
HSP, HFP, A2DP, AVRCP
Pairing Name
Mixcder 872
Battery Spec.
Charging Port
Micro USB
Standby Time
More than 500 hours
Talking Time
About 18 hours
Playing Time
About 20 hours
Charging Time
About 1-2 hours
Battery Type
Build in 360mah
rechargeable lithium battery
Operating
Temperature
-10°C~50°C
Storage
Temperature
-40°C~80°C
EN-9
mixcoer.
For more information, please visit our official website
www.mixcder.com
Your valuable comments and suggestions on improving
Mixcder products are welcomed!
© [email protected] O www.mixcder.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement