Mini W iFi Cam

MODEL NO: WF81

USER MANUAL

- Please ensure that you read the complete user manual

carefully before using any part of the product.

- Keep this copy safe for future reference in case of

operational difficulties.

Content

Safety Directions ..............................................................1

Product Accessories ........................................................ 2

Product Structure .............................................................2

Operation Guide ...............................................................3

Smartphone Software Installation ………...........................4

Product Specifications .....................................................18

Indicator status ................................................................18

SAFETY DIRECTIONS

Please go through the following Safety Directions before you start using our product:

- The Mini IP Cam is NOT waterproof or dustproof,

so don’t use it outdoors, in adverse environments

or during rain.

- In order to avoid any damage to the device, the risk

of electric shock to you or starting a fire, use original

DC power-supply.

- You are forbidden from doing any unauthorized

disassembling or dismantlement of this device, or

replacement of its parts. The device’s manufacturer

will not take responsibility or pay liabilities for any

loss

caused by such actions.

- To avoid explosions, damages or bodily injuries,

never put this device into an oven, microwave oven

or direct fire.

- Owing to version changes, this user manual may

vary a little from our real product currently on the

market. In such a case, please take the standard to

be the real product.

1

PRODUCT ACCESSORIES

Mini IP Cam x 1

Bracket x 3

Neck lanyard x 1

Card reader x 1

Silicone case x 1 User Manual x 1 USB Cable x 1 Warning sticker x 1

PRODUCT STRUCTURE

Record/Stop hole for neck strap

Power on/off indicator

Camera

Mini USB port

Mode Button

Micro SD slot

2

QUICK GUIDE FOR CHARGING AND RECORDING

1) Charging

- The Mini IP Cam comes with a built-in rechargeable

battery(200mah). Before you can start using it, please

use the provided USB cable to fully charge it first.

- The red indicator will stay on during charging, it goes

off when the camera is fully charged.

indicator

2) Taking Videos

- Insert the Micro SD card into the camera and power it on.

- Press on the Record/Stop button to start recording. The

blue indicator will flash slowly.

- Another press on the Record/Stop button to stop recording.

The blue indicator will stay on.

Record/Stop

Impotant notice:

1.We strongly recommend that you format the micro SD card for

the first time use.

2.Use the provided card reader to transfer your video files to your

computer to playback.

3.We recommend to use Windows Media Player to playback for a

smooth video.

3

QUICK GUIDE FOR SMARTPHONE SOFTWARE INSTALLATION

AP Connection steps:

1) Scan the QR code or download "MINI IP CAM"

from the App store or Google Play and install it.

Android

IOS

Mini IP Cam

2) Power on the camera and switch it to AP mode

( The default is AP mode already)

4

3) Click the setting from your cell phone and find

the camera hotspot wifi,the wifi name should

be : IPCAM_XXXXXX (where xxxxxx are 6

digits). And connect it.

5

4)Go back to the APP to add the camera and then

auto search ,the camera will be found in the AP

mode.

5) Now the user can click on "IPC-xxxxx" so as to

view the camera via its hotspot.

IPC-E8ABFA2E8062

RCAM-007250-NZCZS

6

6) Although not suggested, just in case your

camera’s LAN search is not working properly,

you can use the Manual add to input ID on the

camera’s back, User name default as: admin.

Then rename it the way you want and save it.

7

P2P Connection steps:

Whenever Wi-Fi Internet is available, you can use this device as an IP camera.

1) On finishing AP Connetion,click setting from the

APP and click the wifi list to find your local wifi

1 2

3

8

4

2) Input your password and save it to connect the camera with your local wifi network.

3) Wait for 1 minute around for the camera to be rebooted.

9

4) After reboot is finished.Pls Switch the AP mode to P2P mode from the camera on the right side

5) Then wait the red signal to be green dot and shown the wifi icon

10

6）Now you are able to view the camera remotely.

11

THE MENUS ON CAMERA'S MAIN INTERFACE

1) Camera:

- You will see all the cameras successfully added.

2) Gallery:

- All photos and videos recorded in your mobile

can be seen here.

12

3) System:

- Receive Push message: This must be enabled if

you set mail setting and alarm setting

- Software Version Information: This indicates the

software version for future upgrades.

4)Setting tool

Click on that,you will see a sub-menu as below:

13

4.1) TF: Click here to check the files recorded in

the Micro SD card of the Mini IP camera.

4.2) Adjust: While in P2P mode, click in order to adjust

the camera’s time same as you would do with

your mobile.

14

4.3) Edit: Click to name/rename your camera, or

create a password for your camera.

Important Remind:

Pls carefully make note of your password if you'd like to change it.Since this camera doesn't allow any password reset to default for a security purpose!

4.4) Delete: Click here to delete the camera you've

already installed.

15

4.5) Settings:

4.5.1) User Settings: This allows you to add other

user as visitor of your camera

4.5.2) Wifi Settings: This allows you to connect your

camera to your local wifi network as stated

above for P2P connection.

4.5.3) Mail Settings: This allows you to set the

receivers of Mail alarm.

4.5.4) Alarm Setting: This allows you to enable or

disable the motion detection,send alarm mails

and alarm recording.

4.5.5) Restore default:This allows you to restore to

factory default.

5) Camera live feed

16

5.1) Vido resolution ： This allows you to

change the video resolution as you want.

5.2) Record video : This allows you to record

video to your app's Gallary

5.3) Take photo : This allows you to take photo to

your app's Gallary

17

PRODUCT SPECIFICATIONS

Video Format ASF 640x480 @ 30FPS, with audio.

Camera Lens Color-pinhole.

Focal Distance 2.8 mm.

Memory Support Up to 32 GB.

USB Port USB 2.0.

File Overwrite Auto

Resolution VGA /QVGA.

Record Time Display Yes

Size of Video File Approx. 24 M/min (VGA).

Power Consumption Max. 230 mA, 3.7 V (With Wi-Fi, LED).

Power Supply Supported: Input 100 - 240 V; Output 5 V, > 500 MA.

Operation Temperature -10 – 50.

Operating Humidity 20% - 80%.

Dimensions 57 x 23 x 20.5 mm.

Indicator status

Status

(Blue indicator)

Always on

Meaning

Stand by

Flashing In recording

Status

(Red indicator)

Always on

Off

Meaning

Charging battery

Battery full

Off Powered off

18