Speco VIP2B3 Instruction manual

Speco VIP2B3 Instruction manual
Add to My manuals

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Speco VIP2B3 Instruction manual | Manualzz

INSTRUCTION MANUAL

VIP2B3

Full-HD

IP IR Mini Bullet

Please read this manual thoroughly before use, and keep it handy for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT

THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE

EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

2

FCC COMPLIANCE STATEMENT

INFORMATION TO THE USER

: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC

RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS

EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT

INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

CAUTION

:

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE

EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

3

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED

SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE

OPERATING INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2

power source only.

17.

ITE is to be connected only to PoE networks without routing to the outside plant.

4

Contents

1. Description ------------------------------------------------------------------6

Features - ------------------------------------------------------------------------------------------ 7

2. Installation ----------------------------------------------------------------- 10

2.2 Assignment ----------------------------------------------------------------------------------------- 12

3. Operation -------------------------------------------------------------------- 13

3.3 Setting the admin password over a secure connection ------------------------------------------- 14

Users------------------------------------------------------------------------------------------ 17

Network -------------------------------------------------------------------------------------- 18

Video & Image ------------------------------------------------------------------------------ 19

Date & Time --------------------------------------------------------------------------------- 21

Event-In -------------------------------------------------------------------------------------- 28

Event-Out ------------------------------------------------------------------------------------ 33

Map------------------------------------------------------------------------------------ 41

Information ---------------------------------------------------------------------------------- 42

Security--------------------------------------------------------------------------------------- 43

Date & Time --------------------------------------------------------------------------------- 46

Network -------------------------------------------------------------------------------------- 47

Language------------------------------------------------------------------------------------- 56

Maintenance --------------------------------------------------------------------------------- 57

Support --------------------------------------------------------------------------------------- 58

3.8 Resetting to the factory default settings ------------------------------------------------------------- 65

4. Appendix -------------------------------------------------------------------- 66

4.2 Preventive Maintenance -------------------------------------------------------------------------------- 67

4.3 Product Specification ----------------------------------------------------------------------------------- 68

5

1. Description

The Network Camera supports the network service for a sensor image with progressive scan, which can be monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users are able to have an access to the Network Camera at once or a single user can monitor various network cameras at the same time. It also enables users to play, store and retrieve a monitoring image by using a PC. All the settings and real-time monitoring screens are also provided through an access to the web.

The Network Camera is fully featured for security surveillance and remote monitoring needs. It is based on the DSP compression chip, and makes it available on the network as real-time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams.

The alarm input and alarm output can be used to connect various third party devices, such as, door sensors and alarm bells.

1.1 Components

The system comes with the following components:

Bullet Camera Installation CD Installation Guide Sunshield Sunshield Bolt Stand

NOTE: Check your package to make sure that you received the complete system, including all components shown above.

6

1.2 Key Features

• Brilliant video quality

The Network Camera offers the highly efficient H.264 video compression, which drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is also supported for increased flexibility.

• Dual or triple streams

The Network Camera can deliver dual or triple video streams simultaneously at full frame rate in all resolutions up to Full-HD(1920 x 1080p) using Motion JPEG and H.264 (or MPEG-4). This means that several video streams can be configured with different compression formats, resolutions and frame rates for different needs.

• Image setting adjustment

The Network Camera also enables users to adjust image settings such as contrast, brightness and saturation to improve images before encoding takes place.

• Intelligent video capabilities

The Network Camera includes intelligent capabilities such as enhanced video motion detection.

The network camera’s external inputs and outputs can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate lights or open/close doors.

• Resolution

• Micro-SD Recording support

The Network Camera also supports a micro-SD memory slot for local recording with removable

storage.

• Improved Security

The Network Camera logs all user access, and lists currently connected users. Also, its full frame rate video can be provided over HTTPS.

• ONVIF

This is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility, reduced cost, and future-proof systems.

7

1.3 Overview

• Connection Cable

NO

1

Black

Wire Color

2

Black

3

4

Red: AC24V/DC12V

White: AC24V/GND

Pink: Alarm In

Yellow: GND

Light Blue: Alarm Out

Gray: GND

Camera Dimension

Dimensions Unit: inch

Description

Service Monitor Port, Stereo Jack

Ethernet,

RJ-45 port compatible with 10/100Mbps having PoE functionality.

Modular Jack

Main Power, 2pin terminal, AC24V 370mA(5.8W) / DC12V 420mA(5.1W)

Alarm Input, Alarm Output: 4pin terminal.

8

Base Installation(Cable through the wall or ceiling with the mount base)

A. Remove the waterproof cap(①).

B. Remove the back cover(②).

C. Make the camera settings.

D. Combine the back cover and waterproof cap(②→①).

Note: If you do not remove or combine in the order, the camera will be damaged.

E. Secure the camera to the wall or ceiling by the camera stand (individual purchase).

9

2. Installation

2.1 Connection

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is used for directly connection to PC, while a direct cable is used for connection to a hub.

You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

AI(Alarm In) :

You can use external devices to signal the network camera to react on events. Mechanical or electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.

G(Ground) :

Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector.

Alarm Out :

The network camera can activate external devices such as buzzers or lights. Connect the device

to the AO (Alarm Out) and G (Ground) connectors.

Micro SD memory slot on the Rear Board

Remove the rear cap of the camera to insert the SD memory card.

• Connecting the Power

Connect the power of DC12V or AC24Vfor the network camera. Connect the positive(+) pole to the ‘+’ position and the negative(-) pole to the ‘-‘ position for the DC power.

Be careful not to reverse the polarity when you connect the power cable.

You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.

10

• Connecting Service Monitor Port

Service monitor port is used for an easy OSD setup. To make changes in the OSD menu, please use the OSD controller provided optionally with your camera purchase. You can set Camera Title and IP Address.

▶ ID & IP assignment

To make changes in the OSD menu, please the OSD controller provided optionally with your camera purchase. You can set Camera Title and IP Address.

1. Connect the OSD Controller to the Service Monitor port of the network camera.

2. Connect Service Monitor and the Video Output port of the OSD Controller.

3. Press the SET button to access main Menu.

4. Change Camera ID, and IP Address. You can change the Name or Title and IP address of the camera. Using the ↑↓←→ buttons on the controller, you can change the parameters.

5. Select SAVE or CANCEL to exit the Main Menu.

Video Output is also used for a focus control when installing the camera. Video Output is restricted to 704x480(576) resolution.

Note: You can get the Optional OSD Controller from your installer.

11

2.2 Network Connection and IP assignment

The Network Camera supports the operation through the network. When a camera is first connected to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the

“Speco Manager” utility on the CD. The factory default IP is “192.168.30.220”.

1. Connect the Network Camera / device to the network and power up.

2. Start Speco Manager utility (Start>All programs>Speco Manager>Speco Manager), the main window will be displayed, after a short while any network devices connected to the network will be displayed in the list.

3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu below.

4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address.

Note: For more information, refer to the Speco Manager

User’s Manual.

12

3. Operation

The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows.

Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls.

3.1 Access from a browser

1. Start a browser (Internet Explorer).

2. Enter the IP address or host name of the Network Camera in the Location/Address field of your browser.

3. You can see a starting page. Click Live View or Setup to enter web page.

4. The network camera’s Live View page appears in your browser.

13

3.2. Access from the internet

Access from the internet once connected, the Network Camera is accessible on your local network

(LAN). To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera. This is enabled from Setup > System > Network > NAT.

For more information, please see “3.5.6 System>Network>NAT” of User’s Manual.

3.3 Setting the admin password over a secure connection

To gain access to the product, the password for the default administrator user must be set. This is done in the “Admin Password” dialog, which is displayed when the network camera is accessed for the setup at the first time. Enter your admin name and password, set by the administrator.

Note: The default administrator username is admin and password is 1234. If the password is lost, the Network Camera must be reset to the factory default settings. See “3.8 Resetting to the

Factory Default Settings”.

To prevent network eavesdropping when setting the admin password, this can be done via an encrypted HTTPS connection, which requires an HTTPS certificate (see note below).

To set the password via a standard HTTP connection, enter it directly in the first dialog shown below.

To set the password via an encrypted HTTPS connection, see “3.5.6 System >Security>HTTPS”.

Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web browsers and servers. The HTTPS certificate controls the encrypted exchange of information.

3.4 Live View Page

The live view page comes in several screen modes: 1920x1080, 1280x1024, 1280x720,

704x480(576), 640x480, 352x240(288) and 320x240. Users are allowed to select the most suitable one out of those modes.

Please, adjust the mode in accordance with your PC specifications and monitoring purposes.

14

Live View Page Search & Playback Page Setup Page Help Page

The video drop-down list allows you to select a customized or pre-programmed video stream on the live view page. Stream profiles are configured under Setup > Basic

Configuration > Video & Image. For more information, please see “3.5.1 Basic Configuration >

Video & Image” of User’s Manual.

The resolution drop-down list allows you to select the most suitable one out of video resolutions to be displayed on live view page.

The protocol drop-down list allows you to select which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network.

The live viewer toolbar is available in the web browser page only. It displays the following buttons:

The Stop button stops the video stream being played. Pressing the key again toggles the start and stop. The Start button connects to the network camera or start playing a

The Pause button pause the video stream being played.

The Snapshot button takes a snapshot of the current image. The location where the image is saved can be specified.

The digital zoom activates a zoom-in or zoom-out function for video image on the live

screen.

The Full Screen button causes the video image to fill the entire screen area. No other windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full

The Manual Trigger button activates a pop-up window to manually start or stop the event.

The network camera provides several images and video stream formats. Your requirements and the properties of your network will determine the type you use.

The Live View page in network camera provides access to H.264, MPEG-4 and Motion JPEG video streams, and to the list of available video streams. Other applications and clients can also access these video streams/images directly, without going via the Live View page.

15

3.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product

Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access to the settings for Basic, Live View, Video & Image, Event, and System Configuration.

You can configure the network camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools

When accessing the Network Camera for the first time, the “Admin Password” dialog appears. Enter your admin name and password, set by the administrator.

Note: If the password is lost, the Network Camera must be reset to the factory default settings. See “3.8

Resetting to the Factory Default Settings”.

3.5.1 Basic Configuration

You can see the device information in this information page.

16

1) Users

User access control is enabled by default. An administrator can set up other users, by giving these user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page, as described below:

The user list displays the authorized users and user groups (levels):

User Group

Guest

Authority

Provides the lowest level of access, which only allows access to the

Live View page.

Operator

Administrator

An operator can view the Live View page, create and modify events, and adjust certain other settings. Operators have no access to System Options.

An administrator has unrestricted access to the Setup tools and can determine the registration of all other users.

Enable anonymous viewer login: Check the box to use the webcasting features. Refer to

“3.5.2 Video & Image” for more details.

17

2) Network

The network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the network camera can be set automatically via DHCP, or a static IP address can be set manually.

If IPv6 is enabled, the network camera receive an IP address according to the configuration in the network router. There is also the option of using the Internet Dynamic DNS Service. For more information on setting the Network, please see Setup> System>Security>Network.

• Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a particular MAC address.

• Use the following IP address - To use a static IP address for the Network Camera, check the radio button and then make the following settings:

- IP address - Specify a unique IP address for your Network Camera.

- Subnet mask - Specify the mask for the subnet the Network Camera is located on.

- Default router - Specify the IP address of the default router (gateway) used for connecting devices attached to different networks and network segments.

Notes:

1. DHCP should only be enabled if using dynamic IP address notification, or if your DHCP server can update a DNS server, which then allows you to access the Network Camera by name (host name).

If DHCP is enabled and you cannot access the unit, you may have to reset it to the factory default settings and then perform the installation again.

2. The ARP/Ping service is automatically disabled two minutes after the unit is started, or

as soon as an IP address is set.

3. Pinging the unit is still possible when this service is disabled.

18

3) Video & Image

• Stream1 Setting

- Codec:

The codec settings are separated into MPEG4 and H.264.

H.264 is a lso known as MPEG-4 Part 10. This is the new generation compression standard for digital video. This function offers higher video resolution than Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video at a lower bit rate.

There are 4 pre-programmed stream profiles available for quick set-up. Choose the form of video encoding you wish to use from the drop-down list:

* H.264 HP(High Profile): The primary profile for broadcast and disc storage applications, particularly for high-definition television applications (for example, this is the profile adopted by the Blu-ray Disc storage format and the DVB HDTV broadcast service).

* H.264 MP(Main Profile):

Primarily for low-cost applications that requires additional error robustness, this profile is used rarely in videoconferencing and mobile applications, it does add additional error resilience tools to the Constrained Baseline Profile. The importance of this profile is fading after the Constrained Baseline Profile has been defined.

* H.264 BP(Baseline Profile):

Originally intended as the mainstream consumer profile for broadcast and storage applications, the importance of this profile faded when the High profile was developed for those applications.

19

Mostly aimed for use in situations where low bit rate and low resolution are mandated by other conditions of the applications, like network bandwidth, device size etc.

- Resolution:

It enables users to determine a basic screen size when having an access through the Web

Browser or PC program. The screen size control comes in seven modes like 1920x1080,

1280x720, 640x480, 352x240, and 320x240. Users can reset the selected screen size anytime while monitoring the screen on a real-time basis.

- Bitrate control:

The bit rate can be set as Variable Bit Rate (VBR) or Constant Bit Rate (CBR). VBR adjusts the bit rate according to the image complexity, using up bandwidth for increased activity in the image, and less for lower activity in the monitored area.

CBR allows you to set a fixed target bitrate that consumes a predictable amount of bandwidth. As the bit rate would usually need to increase for increased image activity, but in this case cannot, the frame rate and image quality are affected negatively. To partly compensate for this, it is possible to prioritize either the frame rate or the image quality whenever the bit rate needs to be increased. Not setting a priority means the frame rate and image quality are equally affected.

When it is necessary to adjust a smooth transmission status according to network situations, users can increase the compressibility to carry out the network transmission stably. On the other hand, when it is necessary to maintain a detailed monitoring screen by enhancing the image quality, users can do so by decreasing the compressibility. In ease case, please adjust this function according to the network status and monitoring purposes. The default is

2000(Kbps).

Upon the real-time play, users should select a frame refresh rate per second. If the rate is high, the image will become smooth. On the other hand, if the rate is low, the image will not be natural but it can reduce a network load.

- GOP size:

Select the GOP(Group of Picture) size. If users want to have a high quality of fast image one by one, please decrease the value. For the purpose of general monitoring, please do not change a basic value. Such act may cause a problem to the system performance. For the details of GOP setting, please contact the service center.

• Stream2 Setting

Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control the bandwidth and storage used by the Motion JPEG video stream in these situations. Limiting the frame rate and quality optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage, the Resolution,

Frame rate, and Frame Quality should be set to an optimal value.

- JPEG

Same as the Stream1 Setting.

- JPEG

20

- JPEG

Select the picture quality. If users want to have a high quality of fast image one by one, please decrease the value. For the purpose of general monitoring, please do not change a basic value. Such act may cause a problem to the system performance.

• Stream3 Setting

Same as the Stream1 Setting. Click the checkbox to activate the 3 rd

stream.

When satisfied with the settings, click Save, or click Reset to revert to previously saved settings.

4) Date & Time

• Current Server Time

It displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below).

• New Server Time

Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the “Automatically adjustment for daylight saving time changes”.

From Time Mode section, select the preferred method to use for setting the time:

- Synchronize with computer time: sets the time from the clock on your computer.

- Synchronize with NTP Server: the network camera will obtain the time from an NTP server every 60 minutes.

- Set manually: this option allows you to manually set the time and date.

21

• Date & Time Format

Specify the formats for the date and time (12h or 24h) displayed in the video streams.

Select Date & Time format from the drop-down list.

- Date Format: Specify the date format. YYYY: Year, MM: Month, DD: Day

- Time Format: Specify the date format . 24Hours or 12 Hours

3.5.2 Video & Image

Basic

Refer to “3.5.1 Basic Configuration > Video & Image” for more details.

22

Image

• Image Appearance

This page provides access to the advanced image settings for the network camera.

- Brightness: The image brightness can be adjusted in the range 1-10, where a higher value produces a brighter image. saturation.

- Hue: Select an appropriate level in the range 1-10. The value distinguishes color, such as red, yellow, green, or violet.

Sharpness: Controls the amount of sharpening applied to the image. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the image would be less sharp.

Enable flip image: Check this checkbox to flip the image.

-

- Enable Noise Reduction: Check this box to activate the noise reduction.

23

AE & AWB

This page provides access

to set the exposure and white balance of the network camera.

• Exposure Control

Configure the exposure settings to suit the image quality requirements in relation to lighting

consideration.

Mode: Supports exposure modes to control the amount of light detected by the camera sensor based on settings for light conditions. The default setting is Auto with DC-IRIS.

Automatic: Automatically sets the amount of light detected by the DC-IRIS and AGC.

*

-

- AGC: Select a value in the drop-down list to s pecify the level according to the screen luminance. The default setting is 36dB.

-

*

*

- Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.

* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.

24

• White Balance Control

This adjusts the relative amount of red, green and blue primary colors in the image so that the neutral colors are reproduced correctly. The camera can be set to automatically adjust for the type of light and compensate for its color. Alternatively, the type of light source can be set

manually.

From the drop-down list, select the white balance setting suitable for the lighting used for your camera. The available options are:

- Automatic: Automatic identification and compensation for the light source color. This can be used in most situations and is the recommended setting.

- Fixed Incandescent: Fixed color adjustment, ideal for a room with incandescent (a glow) lighting and good for a normal color temperature around 2600K.

- Fixed Fluorescent: Fixed color adjustment; good for fluorescent lighting with a color temperature around 4000K to 5000K.

- Fixed Outdoor: Fixed color adjustment for sunny, with a color temperature around 6500K to

7500K.

Day & Night

25

• Day & Night Control

Select the day/night mode from among three modes.

Mode: Normally works in day mode. It switches automatically to night mode in a dark place.

Automatic: Normally works in day mode. It switches automatically to night mode in a dark place.

Day: Always works in day mode.

Night: Always works in night mode.

• IR Control

- Enable IR: Set this checkbox to activate IR operation.

* Max is 3.

Privacy Masking

The privacy masking function allows you to mask parts of the video image to be transmitted. You can set up to eight privacy masks and the color of privacy masks is black.

The privacy masks are configured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delete, or move the window, by selecting the appropriate window at the mouse menu on the video screen.

26

To create a mask window, follow steps:

1. Click the right button of mouse to see the mouse menu.

2. Select New Privacy Mask in the mouse menu.

3. Click and drag mouse to designate a mask window area.

You can also modify or delete a mask window index. Select an index and then, modify items or delete button. Select “Enable” to activate the privacy masking function.

Webcasting

The network camera can stream live video to a website. Copy the HTML code generated on the screen and pastes it in page code of the website you want to display live video.

Note: To use webcasting service, the Enable Anonymous viewer login option must be checked. Refer to “3.5.1 Basic Configuration > Users” for more details.

27

3.5.3 Event

1) Event-In

On Boot

This is used to trigger the event every time the Network Camera is started. Select “Enable” to activate the motion event.

28

Alarm In

Select “Enable” to activate the alarm event. The network camera supports 1 alarm input port.

- Type: Choose the type of alarm you wish to use from the drop-down list.

- Dwell Time: Set the dwell time of an event lasts for the specified dwell time from the point of detection of an alarm input.

29

Manual Trigger

This option makes use of the manual trigger button provided on the live view page, which are used to start or stop the event type manually. Alternatively the event can be triggered via the product's API

(Application Programming Interface).

30

Motion

Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of 8 Motion and/or Mask windows can be created and configured.

Motion is detected in defined Motion windows, which are placed in the video image to target specific areas. Movement in the areas outside the motion windows will be ignored. If part of a motion window needs to be masked, this can be configured in a Mask window.

• Pre-Viewer

Motion detection windows are configured by Motion or Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delete, or move the window, by selecting the appropriate window at the mouse menu on the video screen.

To create a motion or mask window, follow steps:

1. Click the right button of mouse to see the mouse menu.

2. Select New Motion (or Mask) Window in the mouse menu.

3. Click and drag mouse to designate a motion area.

31

• Motion Detection Setting

The behavior for each window is defined by adjusting the Threshold and Sensitivity, as described below.

A motion index is a set of parameters describing Window Name, Type, Threshold, Sensitivity, and

Dwell Time. Window Types is one of Motion and Mask windows.

- Threshold: Sets up the threshold for the motion detection.

- Sensitivity: Sets up the sensitivity for the motion detection.

- Dwell Time: Set the hold time an event lasts for the specified hold time from the point of detection of a motion.

You can also modify or delete a motion index. Select an index and then, click the Modify or Delete button.

Select “Enable” to activate the motion window.

Network Loss

This is used to trigger the event every time the network connection is failed. Select “Enable” to activate the Network Loss event.

32

2) Event-Out

SMTP(E-Mail)

The Network Camera can be configured to send event and error email messages via SMTP (Simple

Mail Transfer Protocol).

• SMTP(E-Mail) Setting

Select “Enable” to activate the SMTP operation.

- Mail Server / Port: Enter the host names (or IP addresses) and port numbers for your mail server in the fields provided, to enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.

- Sender: Enter the email address to be used as the sender for all messages sent by the

Network Camera.

If your mail server requires authentication, check the box for Use authentication to log in to this server and enter the necessary information. administrator or ISP (Internet Service Provider).

To ensure that the login procedure is performed as securely as possible when using SMTP authentication, you must define the weakest authentication method allowed.

33

by the mail server. The most secure method is listed in the drop-down list:

Login / Plain

• SMTP(E-Mail) Receiver

- Receiver: Enter an email address. You can also register the e-mail address of recipients up to 8.

• SMTP(E-Mail) Test

- Receiver: Enter an email address and click the Test button to test that the mail servers are functioning and that the email address is valid.

FTP & JPEG

When the network camera detects an event, it can record and save images to an FTP server. Images can be sent as e-mail attachments. Check the box to enable the service.

- Server: Enter the server's IP address or host name. Note that a DNS server must be specified in the TCP/IP network settings if using a host name.

- Port: Enter the port number used by the FTP server. The default is 21.

-

Use passive mode: Under normal circumstances the Network Camera simply requests the target FTP server to open the data connection. Checking this box issues a PASV command to the FTP server and establishes a passive FTP connection; whereby the Network Camera actively initiates both the FTP control and data connections to the target server. This is normally desirable if there is a firewall between the camera and the target FTP server.

- Remote directory: Specify the path to the directory where the uploaded images will be stored. If this directory does not already exist on the FTP server, there will be an error message when uploading.

- User name/Password: Provide your log-in information.

34

• JPEG Setting

- Pre-event: A pre-event buffer contains images from the time immediately preceding the event trigger. These are stored internally in the server. This buffer can be very useful when checking to see what happened to cause the event trigger.

Check the box to enable the pre-trigger buffer, enter the desired total length in seconds, minutes or hours, and specify the required image frequency.

- Post-event: This function is the counterpart to the pre-trigger buffer described above and contains images from the time immediately after the trigger. Configure as for pre-event.

- Prefix file name: This name will be used for all the image files saved. If suffixes are also used, the file name will take the form <prefix>.<suffix>.<extension>

- Additional suffix: Add either a date/time suffix or, a sequence number - with or without a maximum value

HTTP Server

When the network camera detects an event, HTTP Server is used to receive uploaded image files and/or notification messages. Check the box to enable the service.

- URL: The network address to the server and the script that will handle the request.

- User name/Password: Provide your log-in information.

• HTTP Server Test

When the setup is complete, the connection can be tested by clicking the Test button.

35

Alarm Out

When the network camera detects an event, it can control external equipment connected to its alarm output port. Check the box to enable and then select either:

- Enable: When you select “Enable alarm out”, the output will be activated for as long as the event is active.

36

Record

When the network camera detects an event, it can record video stream in the Micro SD Memory (not supplied) or NAS (Network Attached Device) as a storage device. Check the box to enable the service.

• Record Setting

-

- Stream Type: You can select Stream1, Stream2, or Stream3.

Stream1: H.264 or MPEG-4 data

*

*

-

Stream3: You can select VIDEO or IMAGE.

Pre-event: Enter pre-event time value for storage device pre-recording.

-

• Device Setting

Select Device Type to be recorded in the drop-down list.

- SD: built-in SD card

- CIFS: A file format for a NAS device.

- NFS: A file format for a NAS device.

Note1: Common Internet File System (CIFS) is a remote file access protocol that forms the basis for Windows file sharing, network printing, and various other network services. CIFS requires a large number of request/response transactions and its performance degrades significantly over high-latency WAN links such as the Internet.

37

Note2: Network File System (NFS) is a network file system protocol, allowing a user on a client computer to access files over a network in a manner similar to how local storage is accessed. NFS, like many other protocols, builds on the Open Network Computing Remote

Procedure Call (ONC RPC) system.

Address: Enter IP address for NAS device.

Remote Directory: Enter directory or folder location to be recorded in the NAS device.

* Capacity: Enter the capacity of storage to be used. It must be less than the total storage capacity.

* IP/Password: Enter ID and Password. The network camera will ask them whenever you access NAS device.

• Format

Click the Format button to format SD card.

• Device Information

Show current SD card information.

38

Event Notification

When the network camera detects an event, Notification Server is used to receive notification messages as a type of XML data format. Check the box to enable the service. the request.

39

Boost

The Boost feature is used in conjunction with event detection. When this feature is turned ON, the

Framerate and Bitrate in the boost condition can be set to a different value than the ones in the normal condition field. When an event is detected, the camera will boost the Framerate and Bitrate from the normal condition to this boosted level for the duration of the event.

Check the box to enable the service.

You can set the condition in Normal and Boost mode. change it in Boost Condition.

40

3) Event Map

The event map allows you to change the settings and establish a schedule for each event trigger from the Network Camera. You can register the event map up to max. 15.

Click Add button to make a new event map and you can see a popup window as below.

41

• General

Enter the name for a new event map.

• Event In

Select an event type in the drop down list.

• Event Out

- E-mail: Select email addresses you want to send via email that an event has occurred.

- FTP: Select checkbox beside FTP to record and saves images to an FTP server when an

event occurred.

- HTTP Server: It sends notification messages to an HTTP server that listens for these.

The destination server must first be configured on the Event In page. Enter a message you want to send.

- Record: Select Record checkbox to record video stream when an event has occurred. The

Record option must first be configured on the Event Out page.

3.5.4 System

1) Information

You can enter the system information. This page is very useful when you refer device information after installation.

• Device Name Configuration

Enter the device name.

• Location Configuration

Enter the location information. You can enter that by four.

42

2) Security

Users

User access control is enabled by default, when the administrator sets the root password on first access. New users are authorized with user names and passwords, or the administrator can choose to allow anonymous viewer login to the Live View page, as described below:

• User Setting

Check the box to enable anonymous viewer login to the Network Camera without the user account. When using the user account, users have to try log-in at every access.

• User List Setting

This section shows a registered user account. Enter a user name and password to be added, and register them by pressing the Add button. You can see the pop-up window as below.

43

HTTPS

For greater security, the Network Camera can be configured to use HTTPS (Hypertext Transfer

Protocol over SSL (Secure Socket Layer)). That is, all communication that would otherwise go via

HTTP will instead go via an encrypted HTTPS connection.

• HTTPS Connection Policy

Choose the form of connection you wish to use from the drop-down list for the administrator,

Operator and Viewer to enable HTTPS connection (set to HTTP by default).

- HTTP

- HTTPS

• Upload Certificate

To use HTTPS for communication with the Network Camera, An official certificate issued by a CA (Certificate Authority) must be uploaded from your PC. Provide the path to the certificate directly, or use the Browse button to locate it. Then click the Upload button.

Please refer to the home page of your preferred CA for information on where to send the request. For more information, please see the online help.

44

IP Filtering

Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP address entries may be specified (a single entry can contain multiple IP addresses). Click the Add button to add new filtered addresses.

When the IP address filter is enabled, addresses added to the list are set as allowed or denied addresses. All other IP addresses not in this list will then be allowed or denied access accordingly, that is, if the addresses in the list are allowed, then all others are denied access, and vice versa. See also the online help for more information.

Note that users from IP addresses that will be allowed must also be registered with the appropriate access rights (Guest, Operator or Administrator). This is done from Setup> System>Security>Users.

45

3) Date & Time

• Current Server Time

It displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below).

• New Server Time

Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select “Automatically adjustment for daylight saving time changes”.

From the Time Mode section, select the preferred method to use for setting the time:

- Synchronize with computer time: sets the time from the clock on your computer.

- Synchronize with NTP Server: the network camera will obtain the time from an NTP server every 60 minutes.

- Set manually: this option allows you to manually set the time and date.

• Date & Time Format

Specify the formats for the date and time (12h or 24h) displayed in the video streams.

Select Date & Time format from the drop-down list.

- Date Format: Specify the date format. YYYY: Year, MM: Month, DD: Day

- Time Format: Specify the date format . 24Hours or 12 Hours

Note: Note that if using a host name for the NTP server, a DNS server must be configured under

TCP/IP settings.

46

4) Network

Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be established, along with setting for DDNS, uPnP, QoS, Zeroconfig, and Bonjour.

47

Basic

- Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known

IP address for a particular MAC address.

- Use the following IP address: To use a static IP address for the Network Camera, check the radio button and then make the following settings:

* IP address: Specify a unique IP address for your Network Camera.

* Subnet mask: Specify the mask for the subnet the Network Camera is located on.

* Default router: Specify the IP address of the default router (gateway) used for connecting

• IPv6 Address Configuration

Check this box to enable IPv6. Other settings for IPv6 are configured in the network router.

• DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on your

network.

- Obtain DNS Server via DHCP: Automatically use the DNS server settings provided by

- Use the following DNS server address: enter the desired DNS server by specifying the following:

Camera. Multiple domains can be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example, myserver is the host name in the

Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the

* DNS servers: enter the IP addresses of the primary and secondary DNS servers.

• Host Name Configuration

- Host Name: enter the host name to be used as device information in the client software or

Speco Manager.

• Services

- HTTP port: Enter a port to receive a service through the HTTP. Default Port Number is

‘80’.

- HTTPS port: Enter a port to receive a service through the HTTPS. Default Port Number is

‘443’.

- RTSP port: Enter a port to receive a service through the RTSP. Default Port Number is

‘554’.

• ARP/Ping Setting

- Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates the unit's MAC address with an IP address. Check this box to

enable service.

Leave disabled to prevent unintentional resetting of the IP address.

48

DDNS

• Internet DDNS(Dynamic Domain Name Service)

When using the high-speed Internet with the telephone or cable network, users can operate the

Network Camera even on the floating IP environment in which IPs are changed at every access.

- Enable DDNS: Check to get DDNS service to be available.

* Hostname: Select the DDNS server.

* Result: Success or Fail as a result of the connection to DDNS server.

49

RTP

Have a setting for sending and receiving a video on a real-time basis. These settings are the IP address, port number, and Time-To-Live value to use for the media stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For more information, please see the online help.

• Port Range

- Start port: Enter a value between 1024 and 65532

• Multicast

This function is for sending Video to Multicast group.

- Enable Multicast: Check the checkbox to enable multicast operation.

- Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.

- RTP port: Enter a value between 1024 and 65532.

- RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower value. On the other hand, if a network status is poor, enter a higher value. When there are many Network Cameras or users, a higher value may cause a heavy load to the network.

For a detailed setting, please consult with a network manager.

50

UPnP

The Network Camera includes support for UPnP™. UPnP™ is enabled by default, and the Network

Camera then is automatically detected by operating systems and clients that support this protocol.

Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the

Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows

Components and open the Networking Services section. Click Details and then select UPnP™ as the service to add.

51

QoS

Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency, and no packet losses.

The main benefits of a QoS-aware network are:

- The ability to prioritize traffic and thus allow critical flows to be served before flows with lesser priority.

- Greater reliability in the network, thanks to the control of the amount of bandwidth an application may use, and thus control over bandwidth races between applications.

• DSCP Settings

For each type of network traffic supported by your network video product, enter a DSCP

(Differentiated Services Code Point) value. This value is used to mark the traffic’s IP header.

When the marked traffic reaches a network router or switch, the DSCP value in the IP header tell the router or switch which type of treatment to apply to this type of traffic, for example, how much bandwidth to reserve for it. Note that DSCP values can be entered in decimal or hex form, but saved values are always shown in decimal.

The following types of traffic are marked:

- Live Stream DSCP:

- Event/Alarm DSCP:

- Management DSCP:

52

• Auto Traffic Control

Set a limitation on user network resources by designating the maximum bandwidth. possible to set a limitation on the maximum bandwidth in the unit of Mbit/s or kbit/s.

- Auto frame rate: Selected if not influenced by a network-related program or equipment without a limitation on the network bandwidth.

NAT

A broadband router allows devices on a private network (LAN) to share a single connection to the

Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most broadband routers are pre-configured to stop attempts to access the private network (LAN) from the public network/Internet.

Use NAT when your network cameras are located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the network camera.

Notes:

-

For NAT traversal to work, this must be supported by the broadband router.

-

The broadband router has many different names:

“NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

53

- Enable: when enabled, the network camera attempt to configure port mapping in a

NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the

Network Camera (see System>Network>UPnP).

* automatic setting: The Network Camera automatically search for NAT routers on your network.

* manual setting: Select this option to manually select a NAT router and enter the external port number for the router in the field provided.

Notes:

- If you attempt to manually enter a port that is already in use, an alert message will be displayed.

- When the port is selected automatically it is displayed in this field. To change this enter a new port number and click Save.

54

Zeroconfig

Zeroconfig allows the network camera to create and assign IP address for network cameras and connect to a network automatically.

Zero configuration networking (zeroconf), is a set of techniques that automatically creates a usable

Internet Protocol (IP) network without manual operator intervention or special configuration servers.

Zero configuration networking allows devices such as computers and printers to connect to a network automatically. Without zeroconf, a network administrator must set up services, such as Dynamic Host

Configuration Protocol (DHCP) and Domain Name System (DNS), or configure each computer's network settings manually, which may be difficult and time-consuming.

Zeroconf is built on three core technologies:

Assignment of numeric network addresses for networked devices (link-local address auto configuration)

Automatic resolution and distribution of computer hostnames (multicast DNS)

Automatic location of network services, such as printing devices through DNS service discovery.

55

Bonjour

The network camera includes support for Bonjour. When enabled, the network camera is automatically detected by operating systems and clients that support this protocol.

Note: Bonjour - Also known as zero-configuration networking, Bonjour enables devices to automatically discover each other on a network, without having to enter IP addresses or configure

DNS servers. Bonjour is a trademark of Apple Computer, Inc.

5) Language

It will be able to select a user language. The type of language it will be able to select is the English, the French, the German, the Spanish and the Italian.

56

6) Maintenance

• Maintenance Server

- Restart: The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.

- Restore: The unit is restarted and most current settings are reset to factory default values.

The settings that are not affected are:

* the boot protocol (DHCP or static)

* the static IP address

* the default router

* the subnet mask

* the system time

- Default: The default button should be used with caution. Pressing this will return all of the

Network Camera's settings to the factory default values (including the IP address).

• Update Server

Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the upgrade, do not turn off the power of the Network Camera. And try an access again after waiting five minutes or longer.

• Backup

Save a setting value that users enter to the Network Camera, to a user PC.

• Restore

Import and apply a setting value saved to a user PC.

57

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-configurations or for firmware upgrades.

7) Support

The support page provides valuable information on troubleshooting and contact information, should you require technical assistance.

• Logs

The network Camera support system log information. Click the System Log button to get the log data.

• Update Server

- Server Report: Click the Server Report button to get the important information about the server’s status and should always be included when requesting support.

- Parameter List: Click the Parameter List button to see the unit’s parameters and their current settings.

58

• Health Check

- System Check: Click the System Check button to get the important information about the and audio stream. You can see the pop-up window below.

59

camera’s network setting and traffic. You can see the pop-up window below.

60

video. You can see the pop-up window below.

3.5.5 About

The following website will provide the support information for the Network Camera information and operation.

61

3.6 Playback

The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event type used to start the recording, calendar and time slice bar indicates if the recording is existed or not.

The description of playback window follows.

(1) Video Screen

You can see the video screen when playing the video clip in the Micro SD memory

(2) Playback Buttons

To view a recording data in the SD local storage, select it from the list and click the Playback buttons.

Go to the first: go to the beginning of the video clip.

Fast

Backward play: play backward of the video clip.

Step backward play: go back one frame of the video clip.

Pause:

Step forward play: go forward one frame of the video clip.

Forward Play: play forward the video clip.

Fast forward play: play fast forward of the video clip.

62

Step forward play: go forward one frame of the video clip.

Clip copy: copy the video clip.

Zoom In: zoom in the video clip

Full Screen: display full screen of the video.

(3) Time Chart

Display an hour-based search screen for the chosen date. If there is recording data, a blue section will be displayed on a 24-hour basis. If you select a particular hour in the chart, a yellow square on the hour will be displayed.

(4) Speaker Control Bar

Use this scale to control the volume of the speakers.

(5) Search Calendar

Search results from the SD local storage in the network camera connected are displayed monthly. If there is a recorded data for a particular date, a blue square on the date will be displayed. If you select a particular date in the calendar, a yellow square on the date will be displayed.

(6) Play Time

Displays time of the video playing.

(7) Event Search Window

Select a search option in the drop-down list and click GO button. You can also enter the time period for searching. If you click Start Date or End Date zone, displays Search Calendar.

(8) Event List Window

Event List displays the event(s) that were recorded in the SD local storage. Select a list and click the play button. The video clip will be played.

63

3.7 Help

The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a description on setting and Help page by which users can manipulate the Network Camera without a reference to the manual.

64

3.8 Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance web page (described in “3.5.6 System > Maintenance”) or use the Reset button on the network camera, as described below:

• Using the Reset Button

Follow the instructions below to reset the Network Camera to the factory default settings using the Reset button.

1. Switch off the Network Camera by disconnecting the power adapter.

2. Remove the rear cap of the camera.

3. Press and hold the Reset button with a straightened paperclip while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds.

4. Release the Reset button.

5. The network camera

resets to factory defaults and restarts after completing the factory reset.

The unit now has the default IP address 192.168.30.220.

6. Close the rear cap of the camera.

Caution: When performing a Factory Reset, you will lose any settings you have saved.

65

4. Appendix

4.1 Troubleshooting

Troubleshooting if problems occur, verify the installation of the Network Camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information.

Problems/Symptoms

The camera cannot be accessed by some clients.

The camera works locally, but not externally.

Poor or intermittent network connection.

Possible Causes or Corrective Actions

If using a proxy server, try disabling the proxy setting in your browser. Check all cabling and connectors.

Check if there are firewall settings that need to be adjusted.

Check if there are router settings that need to be configured.

If using a network switch, check that the port on that device uses the same setting for the network connection type

(speed/duplex).

The camera cannot be accessed via a host name.

Check that the host name and DNS server settings are correct.

Not possible to log in.

No image using Refresh and/or slow updating of images.

Images only shown in black & white.

Blurred images.

When HTTPS is enabled, ensure that the correct protocol (HTTP or HTTPS) is used. When attempting to log in, you may need to manually type in http or https in the browser's address bar.

If images are very complex, try limiting the number of clients accessing the camera.

Check the Video & Image setting.

Poor image quality.

Rolling dark bands or flickering in image.

H.264 not displayed in the client.

Multicast H.264 not displayed in the client.

Multicast H.264 only accessible by local clients.

Color saturation is different in

H.264 and Motion JPEG.

Video cannot be recorded.

Refocus the camera.

Increased lighting can often improve image quality. Check that there is sufficient lighting at the monitored location. Check all image and lighting settings.

Try adjusting the Exposure Control setting under AE and AWB part.

Check that the correct network interface is selected in the Video

& Image/Stream.

Check with your network administrator that the multicast addresses used by the camera are valid for your network. Check that the Enable multicast checkbox are enabled in the

System/Network/RTP tab. Checks with your network administrator to see if there is a firewall preventing viewing.

Check if your router supports multicasting, or if the router settings between the client and the server need to be configured.

The TTL value may need to be increased.

Modify the settings for your graphics adapter. Please see the adapter's documentation for more information.

Check that the SD Card is inserted properly.

Check that the SD Card is formatted properly.

66

4.2 Preventive Maintenance

Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equipment failure.

Every three-month, perform the following maintenance.

1. Inspect all connection cables for deterioration or other damage.

2. Clean components with a clean damp cloth.

3. Verify that all the mounting hardware is secure.

67

C

A

M

E

R

A

O

R

K

N

E

T

W

4.3 Product Specification

Main Item

Image sensor

Active Array

Lens

Angle of View

Specification

1/2.8” Progressive scan RGB CMOS

1920(H) x 1080(V)

Fixed 3.7mm Lens , F1.8

3.7mm – 89°(H)

IR Distance

Min. illumination

Shutter Speed

Video Compression

Video Resolutions

Frame Rate

Video Streaming

Protocol

Security

Max. Connection

API Programming Interface

Alarm Triggers

Alarm Events

20m(with built-in 20 IR LEDs)

Color: 1.6Lux, B/W: 0.0Lux (F1.8, 50IRE with IR On)

1/20,000 ~ 1/4

Motion JPEG

MPEG-4 Part2

H.264 (MPEG-4 Part 10)

Profiles: H.264 HP, MP, and BP, MPEG-4 ASP and SP

320x240 ~ 1920x1080

30fps/25fps @ all resolutions

Simultaneously H.264(or MPEG-4) and MJPEG

Controllable Frame Rate and Bandwidth VBR/CBR H.264 and

MPEG-4

TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, QoS, FTP, SNMP, uPnP,

RTP, RTSP, RTCP, DHCP, ARP, Zeroconf, Bonjour

Multi-user authority, HTTPS, IP Filtering, Privacy Zone

10

API Supported,

Open Platform Compatible: ONVIF

Motion Detection, External Input, Manual Trigger

File upload via FTP and HTTP

Notification via E-mail, HTTP and TCP

External Output activation

Video Buffering

Motion Detection

Pre and Post Alarm

Yes, max. 8 programmable zone

Network Time Synchronization Yes

SD Recording Yes, Schedule/Event

Software Reset

Factory Reset

Auto Recovery

Installation Tool

Yes

Yes, Button/Web browser

Yes

Speco Manager, Speco VMS

Upgrade Web browser, Speco Manager, Speco VMS

10BASE-T/100BASE-TX

Video Output

Starting Temperature

Operating Temperature

Operation Humidity

Housing

Stereo Jack

, 1.0 Vp-p (75ohm, composite)

-10°C ~ 50°C

-10°C ~ 50°C

0~90% (non-condensing)

Weather-proof IP67-rated housing

Power Consumption

Dimensions (ø x D)

Unit Weight

DC12V 420mA(5.1W), AC24V 370mA(5.8W), PoE 130mA(6W)

Power over Ethernet IEEE 802.3af Class0

ø 2.36” x 10” inch(D), Including Stand

1.9lb(Including

Sunshield and

Stand)

68

System Requirement for Web Browser

Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft

Windows XP, or Microsoft Windows Vista

CPU: Intel Core 2 Duo 2Ghz or higher, 1GB RAM or more, 10GB free disk or higher

VGA: AGP, Video RAM 32MB or higher (1024x768, 24bpp or higher)

69

Printed in Korea

VIP2B3

Full-HD

IP IR Mini Bullet

70

advertisement

Related manuals

Download PDF

advertisement